This patch adds the capability to remove pages from a ring buffer
without destroying any existing data in it.
This is done by removing the pages after the tail page. This makes sure
that first all the empty pages in the ring buffer are removed. If the
head page is one in the list of pages to be removed, then the page after
the removed ones is made the head page. This removes the oldest data
from the ring buffer and keeps the latest data around to be read.
To do this in a non-racey manner, tracing is stopped for a very short
time while the pages to be removed are identified and unlinked from the
ring buffer. The pages are freed after the tracing is restarted to
minimize the time needed to stop tracing.
The context in which the pages from the per-cpu ring buffer are removed
runs on the respective CPU. This minimizes the events not traced to only
NMI trace contexts.
Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On gcc 4.5 the function tracing_mark_write() would give a warning
of page2 being uninitialized. This is due to a bug in gcc because
the logic prevents page2 from being used uninitialized, and
gcc 4.6+ does not complain (correctly).
Instead of adding a "unitialized" around page2, which could show
a bug later on, I combined page1 and page2 into an array map_pages[].
This binds the two and the two are modified according to nr_pages
(what gcc 4.5 seems to ignore). This no longer gives a warning with
gcc 4.5 nor with gcc 4.6.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the adding of function tracing event to perf, it caused a
side effect that produces the following warning when enabling all
events in ftrace:
# echo 1 > /sys/kernel/debug/tracing/events/enable
[console]
event trace: Could not enable event function
This is because when enabling all events via the debugfs system
it ignores events that do not have a ->reg() function assigned.
This was to skip over the ftrace internal events (as they are
not TRACE_EVENTs). But as the ftrace function event now has
a ->reg() function attached to it for use with perf, it is no
longer ignored.
Worse yet, this ->reg() function is being called when it should
not be. It returns an error and causes the above warning to
be printed.
By adding a new event_call flag (TRACE_EVENT_FL_IGNORE_ENABLE)
and have all ftrace internel event structures have it set,
setting the events/enable will no longe try to incorrectly enable
the function event and does not warn.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_disable_cpu() and ftrace_enable_cpu() functions were
needed back before the ring buffer was lockless. Now that the
ring buffer is lockless (and has been for some time), these functions
serve no purpose, and unnecessarily slow down operations of the tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's appropriate to use __seq_open_private interface to open
some of trace seq files, because it covers all steps we are
duplicating in tracing code - zallocating the iterator and
setting it as seq_file's private.
Using this for following files:
trace
available_filter_functions
enabled_functions
Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[
Fixed warnings for:
kernel/trace/trace.c: In function '__tracing_open':
kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable]
kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable]
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.
The following example shows how to dump the instruction pointer
and %ax a register at the probed text address. Here we are
trying to probe zfree in /bin/zsh:
# cd /sys/kernel/debug/tracing/
# cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp
00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
# objdump -T /bin/zsh | grep -w zfree
0000000000446420 g DF .text 0000000000000012 Base
zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
# cat uprobe_events
p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
# echo 1 > events/uprobes/enable
# sleep 20
# echo 0 > events/uprobes/enable
# cat trace
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
is_delete and is_return can take utmost 2 values and are better
of being a boolean than a int. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091133.8343.65289.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a debugfs entry under per_cpu/ folder for each cpu called
buffer_size_kb to control the ring buffer size for each CPU
independently.
If the global file buffer_size_kb is used to set size, the individual
ring buffers will be adjusted to the given size. The buffer_size_kb will
report the common size to maintain backward compatibility.
If the buffer_size_kb file under the per_cpu/ directory is used to
change buffer size for a specific CPU, only the size of the respective
ring buffer is updated. When tracing/buffer_size_kb is read, it reports
'X' to indicate that sizes of per_cpu ring buffers are not equivalent.
Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Justin Teravest <teravest@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
memcpy() returns a pointer to "bug". Hopefully, it's not NULL here or
we would already have Oopsed.
Link: http://lkml.kernel.org/r/20120420063145.GA22649@elgon.mountain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, trace_printk() uses a single buffer to write into
to calculate the size and format needed to save the trace. To
do this safely in an SMP environment, a spin_lock() is taken
to only allow one writer at a time to the buffer. But this could
also affect what is being traced, and add synchronization that
would not be there otherwise.
Ideally, using percpu buffers would be useful, but since trace_printk()
is only used in development, having per cpu buffers for something
never used is a waste of space. Thus, the use of the trace_bprintk()
format section is changed to be used for static fmts as well as dynamic ones.
Then at boot up, we can check if the section that holds the trace_printk
formats is non-empty, and if it does contain something, then we
know a trace_printk() has been added to the kernel. At this time
the trace_printk per cpu buffers are allocated. A check is also
done at module load time in case a module is added that contains a
trace_printk().
Once the buffers are allocated, they are never freed. If you use
a trace_printk() then you should know what you are doing.
A buffer is made for each type of context:
normal
softirq
irq
nmi
The context is checked and the appropriate buffer is used.
This allows for totally lockless usage of trace_printk(),
and they no longer even disable interrupts.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC),
we discovered that the stacktrace output of the latency tracers
(preemptirqsoff) was empty.
This bug was caused by the creation of the dynamic length stack trace
again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was).
This bug is caused by the latency tracers requiring the next event
to determine the time between the current event and the next. But by
grabbing the next event, the iter->ent_size is set to the next event
instead of the current one. As the stacktrace event is the last event,
this makes the ent_size zero and causes nothing to be printed for
the stack trace. The dynamic stacktrace uses the ent_size to determine
how much of the stack can be printed. The ent_size of zero means
no stack.
The simple fix is to save the iter->ent_size before finding the next event.
Note, mirage335 asked to remain anonymous from LKML and git, so I will
not add the Reported-by and Tested-by tags, even though he did report
the issue and tested the fix.
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The change to make tracing_on affect only the ftrace ring buffer, caused
a bug where it wont affect any ring buffer. The problem was that the buffer
of the trace_array was passed to the write function and not the trace array
itself.
The trace_array can change the buffer when running a latency tracer. If this
happens, then the buffer being disabled may not be the buffer currently used
by ftrace. This will cause the tracing_on file to become useless.
The simple fix is to pass the trace_array to the write function instead of
the buffer. Then the actual buffer may be changed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Today's -next fails to link for me:
kernel/built-in.o:(.data+0x178e50): undefined reference to `perf_ftrace_event_register'
It looks like multiple fixes have been merged for the issue fixed by
commit fa73dc9 (tracing: Fix build breakage without CONFIG_PERF_EVENTS)
though I can't identify the other changes that have gone in at the
minute, it's possible that the changes which caused the breakage fixed
by the previous commit got dropped but the fix made it in.
Link: http://lkml.kernel.org/r/1334307179-21255-1-git-send-email-broonie@opensource.wolfsonmicro.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This tracer was temporarily removed in 6416669 (workqueue:
temporarily remove workqueue tracing, 2010-06-29) but never
reinstated after concurrency managed workqueues were completed.
For almost two years it hasn't been compilable so it seems nobody
is using it. Delete it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge batch of fixes from Andrew Morton:
"The simple_open() cleanup was held back while I wanted for laggards to
merge things.
I still need to send a few checkpoint/restore patches. I've been
wobbly about merging them because I'm wobbly about the overall
prospects for success of the project. But after speaking with Pavel
at the LSF conference, it sounds like they're further toward
completion than I feared - apparently davem is at the "has stopped
complaining" stage regarding the net changes. So I need to go back
and re-review those patchs and their (lengthy) discussion."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
memcg swap: use mem_cgroup_uncharge_swap fix
backlight: add driver for DA9052/53 PMIC v1
C6X: use set_current_blocked() and block_sigmask()
MAINTAINERS: add entry for sparse checker
MAINTAINERS: fix REMOTEPROC F: typo
alpha: use set_current_blocked() and block_sigmask()
simple_open: automatically convert to simple_open()
scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
libfs: add simple_open()
hugetlbfs: remove unregister_filesystem() when initializing module
drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
fs/xattr.c:setxattr(): improve handling of allocation failures
fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
sysrq: use SEND_SIG_FORCED instead of force_sig()
proc: fix mount -t proc -o AAA
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reading the trace file, the records of each of the per_cpu buffers
are examined to find the next event to print out. At the point of looking
at the event, the size of the event is recorded. But if the first event is
chosen, the other events in the other CPU buffers will reset the event size
that is stored in the iterator descriptor, causing the event size passed to
the output functions to be incorrect.
In most cases this is not a problem, but for the case of stack traces, it
is. With the change to the stack tracing to record a dynamic number of
back traces, the output depends on the size of the entry instead of the
fixed 8 back traces. When the entry size is not correct, the back traces
would not be fully printed.
Note, reading from the per-cpu trace files were not affected.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull vfs pile 1 from Al Viro:
"This is _not_ all; in particular, Miklos' and Jan's stuff is not there
yet."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
ext4: initialization of ext4_li_mtx needs to be done earlier
debugfs-related mode_t whack-a-mole
hfsplus: add an ioctl to bless files
hfsplus: change finder_info to u32
hfsplus: initialise userflags
qnx4: new helper - try_extent()
qnx4: get rid of qnx4_bread/qnx4_getblk
take removal of PF_FORKNOEXEC to flush_old_exec()
trim includes in inode.c
um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
um: embed ->stub_pages[] into mmu_context
gadgetfs: list_for_each_safe() misuse
ocfs2: fix leaks on failure exits in module_init
ecryptfs: make register_filesystem() the last potential failure exit
ntfs: forgets to unregister sysctls on register_filesystem() failure
logfs: missing cleanup on register_filesystem() failure
jfs: mising cleanup on register_filesystem() failure
make configfs_pin_fs() return root dentry on success
configfs: configfs_create_dir() has parent dentry in dentry->d_parent
configfs: sanitize configfs_create()
...
Today's -next fails to build for me:
CC kernel/trace/trace_export.o
In file included from kernel/trace/trace_export.c:197: kernel/trace/trace_entries.h:58: error: 'perf_ftrace_event_register' undeclared here (not in a function)
make[2]: *** [kernel/trace/trace_export.o] Error 1
make[1]: *** [kernel/trace] Error 2
make: *** [kernel] Error 2
because as of ced390 (ftrace, perf: Add support to use function
tracepoint in perf) perf_trace_event_register() is declared in trace.h
only if CONFIG_PERF_EVENTS is enabled but I don't have that set.
Ensure that we always have a definition of perf_trace_event_register()
by making the definition unconditional.
Link: http://lkml.kernel.org/r/1330426967-17067-1-git-send-email-broonie@opensource.wolfsonmicro.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When CONFIG_DYNAMIC_FTRACE is not set, some archs (ARM) test
the variable function_trace_function to determine if it should
call the function tracer. If it is not set to ftrace_stub, then
it will call the function and return, and not call the function
graph tracer.
But some of these archs (ARM) do not have the assembly code
to test if function tracing is enabled or not (quick stop of tracing)
and it calls the helper routine ftrace_test_stop_func() instead.
If function tracer is enabled and then disabled, the variable
ftrace_trace_function is still set to the helper routine
ftrace_test_stop_func(), and not to ftrace_stub. This will
prevent the function graph tracer from ever running.
Output before patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace
Output after patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace
0) ! 253.375 us | } /* irq_enter */
0) | generic_handle_irq() {
0) | handle_fasteoi_irq() {
0) 9.208 us | _raw_spin_lock();
0) | handle_irq_event() {
0) | handle_irq_event_percpu() {
Signed-off-by: Rajesh Bhagat <rajesh.lnx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_dump() (called by ftrace_dump_on_oops) disables interrupts
as it dumps its output to the console, it can keep interrupts disabled
for long periods of time. This is likely to trigger the NMI watchdog,
and it can disrupt the output of critical data.
Add a touch_nmi_watchdog() to each event that is written to the screen
to keep the NMI watchdog from affecting the output.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On PowerPC, FUNCTION_TRACER selects FRAME_POINTER, even
though the architecture does not support it.
This causes the following warning:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && FUNCTION_TRACER && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)
So remove the warning by adding the extra condition
"if !PPC" to FUNCTION_TRACER for FRAME_POINTER selection
Link: http://lkml.kernel.org/r/1330330101-8618-1-git-send-email-gerlando.falauto@keymile.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the ring-buffer code is being used by other facilities in the
kernel, having tracing_on file disable *all* buffers is not a desired
affect. It should only disable the ftrace buffers that are being used.
Move the code into the trace.c file and use the buffer disabling
for tracing_on() and tracing_off(). This way only the ftrace buffers
will be affected by them and other kernel utilities will not be
confused to why their output suddenly stopped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:
perf record -e ftrace:function --filter="(ip == mm_*)" ls
The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:
ip == f1[, ]f2 ... || ip != f3[, ]f4 ...
with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:
perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls
The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.
The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.
The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.
The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.
Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.
Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.
Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.
Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FTRACE_ENTRY_REG macro so particular ftrace entries
could specify registration function and thus become accesible
via perf.
This will be used in upcomming patch for function trace.
Link: http://lkml.kernel.org/r/1329317514-8131-5-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.
The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.
Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.
The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.
The open/close actions are invoked for each tracepoint user when
opening/closing the event.
Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.
Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.
When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.
The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.
Adding 3 inline functions:
ftrace_function_local_disable/ftrace_function_local_enable
- enable/disable the ftrace_ops on current cpu
ftrace_function_local_disabled
- get disabled ftrace_ops::disabled value for current cpu
Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If more than one __print_*() function is used in a tracepoint
(__print_flags(), __print_symbols(), etc), then the temp seq buffer will
not be zero on entry. Using the temp seq buffer's length to know if
data has been printed or not in the current function is incorrect and
may produce incorrect results.
Currently, no in-tree tracepoint causes this bug, but new ones may
be created.
Cc: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If __print_flags() is used after another __print_*() function, the
temp seq_file buffer will not be empty on entry, and the delimiter will
be printed even though there's just one field. We get something like:
|S
instead of just:
S
This is because the length of the temp seq buffer is used to determine
if the delimiter is printed or not. But this algorithm fails when
the seq buffer is not empty on entry, and the delimiter will be printed
because it thinks that a previous field was already printed.
Link: http://lkml.kernel.org/r/1329650167-480655-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Link: http://lkml.kernel.org/r/1322600880.1534.347.camel@localhost.localdomain
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Actually, sched_switch function tracer is merged into wakeup/wakeup_rt
Update 'mini-HOWTO' for ftrace(Kernel function tracer).
If we want to trace "sched:sched_switch" to trace sched_switch func,
We may utilize event option.(e.g: trace-cmd list -e | grep sched)
This patch is based on Linux-3.3.rc2-SMP-PREEMPT
Link: http://lkml.kernel.org/r/1328695537-15081-1-git-send-email-geunsik.lim@gmail.com
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the ftrace_set_filter and ftrace_set_notrace functions
do not return any return code. So there's no way for ftrace_ops
user to tell wether the filter was correctly applied.
The set_ftrace_filter interface returns error in case the filter
did not match:
# echo krava > set_ftrace_filter
bash: echo: write error: Invalid argument
Changing both ftrace_set_filter and ftrace_set_notrace functions
to return zero if the filter was applied correctly or -E* values
in case of error.
Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf tools: Fix compile error on x86_64 Ubuntu
perf report: Fix --stdio output alignment when --showcpuutilization used
perf annotate: Get rid of field_sep check
perf annotate: Fix usage string
perf kmem: Fix a memory leak
perf kmem: Add missing closedir() calls
perf top: Add error message for EMFILE
perf test: Change type of '-v' option to INCR
perf script: Add missing closedir() calls
tracing: Fix compile error when static ftrace is enabled
recordmcount: Fix handling of elf64 big-endian objects.
perf tools: Add const.h to MANIFEST to make perf-tar-src-pkg work again
perf tools: Add support for guest/host-only profiling
perf kvm: Do guest-only counting by default
perf top: Don't update total_period on process_sample
perf hists: Stop using 'self' for struct hist_entry
perf hists: Rename total_session to total_period
x86: Add counter when debug stack is used with interrupts enabled
x86: Allow NMIs to hit breakpoints in i386
x86: Keep current stack in NMI breakpoints
...
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
perf kvm: Fix copy & paste error in description
perf script: Kill script_spec__delete
perf top: Fix a memory leak
perf stat: Introduce get_ratio_color() helper
perf session: Remove impossible condition check
perf tools: Fix feature-bits rework fallout, remove unused variable
perf script: Add generic perl handler to process events
perf tools: Use for_each_set_bit() to iterate over feature flags
perf tools: Unify handling of features when writing feature section
perf report: Accept fifos as input file
perf tools: Moving code in some files
perf tools: Fix out-of-bound access to struct perf_session
perf tools: Continue processing header on unknown features
perf tools: Improve macros for struct feature_ops
perf: builtin-record: Document and check that mmap_pages must be a power of two.
perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
perf tools: Fix truncated annotation
perf script: look up thread using tid instead of pid
perf tools: Look up thread names for system wide profiling
perf tools: Fix comm for processes with named threads
...
There are four places where new filter for a given filter string is
created, which involves several different steps. This patch factors
those steps into create_[system_]filter() functions which in turn make
use of create_filter_{start|finish}() for common parts.
The only functional change is that if replace_filter_string() is
requested and fails, creation fails without any side effect instead of
being ignored.
Note that system filter is now installed after the processing is
complete which makes freeing before and then restoring filter string
on error unncessary.
-v2: Rebased to resolve conflict with 49aa29513e and updated both
create_filter() functions to always set *filterp instead of
requiring the caller to clear it to %NULL on entry.
Link: http://lkml.kernel.org/r/1323988305-1469-2-git-send-email-tj@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add stacktrace_filter= to the kernel command line that lets
the user pick specific functions to check the stack on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stack_tracer is used to look at every function and check
if the current stack is bigger than the last recorded max stack size.
When a new max is found, then it saves that stack off.
Currently the stack tracer is limited by the global_ops of
the function tracer. As the stack tracer has nothing to do with
the ftrace function tracer, except that it uses it as its internal
engine, the stack tracer should have its own list.
A new file is added to the tracing debugfs directory called:
stack_trace_filter
that can be used to select which functions you want to check the stack
on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).
As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are two types of hashes in the ftrace_ops; one type
is the filter_hash and the other is the notrace_hash. Either
one may be null, meaning it has no elements. But when elements
are added, the hash is allocated.
Throughout the code, a check needs to be made to see if a hash
exists or the hash has elements, but the check if the hash exists
is usually missing causing the possible "NULL pointer dereference bug".
Add a helper routine called "ftrace_hash_empty()" that returns
true if the hash doesn't exist or its count is zero. As they mean
the same thing.
Last-bug-reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When disabling the "notrace" records, that means we want to trace them.
If the notrace_hash is zero, it means that we want to trace all
records. But to disable a zero notrace_hash means nothing.
The check for the notrace_hash count was incorrect with:
if (hash && !hash->count)
return
With the correct comment above it that states that we do nothing
if the notrace_hash has zero count. But !hash also means that
the notrace hash has zero count. I think this was done to
protect against dereferencing NULL. But if !hash is true, then
we go through the following loop without doing a single thing.
Fix it to:
if (!hash || !hash->count)
return;
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that each set of pages in the function list are sorted by
ip, we can use bsearch to find a record within each set of pages.
This speeds up the ftrace_location() function by magnitudes.
For archs (like x86) that need to add a breakpoint at every function
that will be converted from a nop to a callback and vice versa,
the breakpoint callback needs to know if the breakpoint was for
ftrace or not. It requires finding the breakpoint ip within the
records. Doing a linear search is extremely inefficient. It is
a must to be able to do a fast binary search to find these locations.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.
At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.
Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.
Another benefit of doing this is that we can also move the
records around; sort them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.
Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.
If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.
When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.
When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.
The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.
To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.
Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FUNCTION_GRAPH is not set
This will force the function profiler to use the function tracer instead
of the function graph tracer.
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function > current_tracer
# cat set_ftrace_filter
schedule
# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 692/68108025 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
kworker/0:2-909 [000] .... 531.235574: schedule <-worker_thread
<idle>-0 [001] .N.. 531.235575: schedule <-cpu_idle
kworker/0:2-909 [000] .... 531.235597: schedule <-worker_thread
sshd-2563 [001] .... 531.235647: schedule <-schedule_hrtimeout_range_clock
# echo 1 > function_profile_enabled
# echo 0 > function_porfile_enabled
# cat set_ftrace_filter
schedule
# cat trace
# tracer: function
#
# entries-in-buffer/entries-written: 159701/118821262 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [002] ...1 604.870655: local_touch_nmi <-cpu_idle
<idle>-0 [002] d..1 604.870655: enter_idle <-cpu_idle
<idle>-0 [002] d..1 604.870656: atomic_notifier_call_chain <-enter_idle
<idle>-0 [002] d..1 604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain
The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.
The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.
Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an EXPORT_SYMBOL_GPL() so that rcutorture can dump the trace buffer
upon detection of an RCU error.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<ffffffff8112e49a>] fput+0xfd/0x1c2
[<ffffffff8112b54c>] filp_close+0x6d/0x78
[<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit 6331c28c96
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_event_call->filter is sched RCU protected but didn't use
rcu_assign_pointer(). Use it.
TODO: Add proper __rcu annotation to call->filter and all its users.
-v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric.
Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org # (2.6.39+)
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Knowing the number of event entries in the ring buffer compared
to the total number that were written is useful information. The
latency format gives this information and there's no reason that the
default format does not.
This information is now added to the default header, along with the
number of online CPUs:
# tracer: nop
#
# entries-in-buffer/entries-written: 159836/64690869 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] ...2 49.442971: local_touch_nmi <-cpu_idle
<idle>-0 [000] d..2 49.442973: enter_idle <-cpu_idle
<idle>-0 [000] d..2 49.442974: atomic_notifier_call_chain <-enter_idle
<idle>-0 [000] d..2 49.442976: __atomic_notifier_call_chain <-atomic_notifier
The above shows that the trace contains 159836 entries, but
64690869 were written. One could figure out that there were
64531033 entries that were dropped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
People keep asking how to get the preempt count, irq, and need resched info
and we keep telling them to enable the latency format. Some developers think
that traces without this info is completely useless, and for a lot of tasks
it is useless.
The first option was to enable the latency trace as the default format, but
the header for the latency format is pretty useless for most tracers and
it also does the timestamp in straight microseconds from the time the trace
started. This is sometimes more difficult to read as the default trace is
seconds from the start of boot up.
Latency format:
# tracer: nop
#
# nop latency trace v1.1.5 on 3.2.0-rc1-test+
# --------------------------------------------------------------------
# latency: 0 us, #159771/64234230, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| / delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
migratio-6 0...2 41778231us+: rcu_note_context_switch <-__schedule
migratio-6 0...2 41778233us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778235us+: rcu_sched_qs <-rcu_note_context_switch
migratio-6 0d..2 41778236us+: rcu_preempt_qs <-rcu_note_context_switch
migratio-6 0...2 41778238us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778239us+: debug_lockdep_rcu_enabled <-__schedule
default format:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The latency format header has latency information that is pretty meaningless
for most tracers. Although some of the header is useful, and we can add that
later to the default format as well.
What is really useful with the latency format is the irqs-off, need-resched
hard/softirq context and the preempt count.
This commit adds the option irq-info which is on by default that adds this
information:
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] d..2 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] d..2 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] d..2 49.309309: need_resched <-mwait_idle
<idle>-0 [000] d..2 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] d..2 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] d..2 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] d..2 49.309315: need_resched <-mwait_idle
If a user wants the old format, they can disable the 'irq-info' option:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [000] 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] 49.309309: need_resched <-mwait_idle
<idle>-0 [000] 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] 49.309315: need_resched <-mwait_idle
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<ffffffff8112e49a>] fput+0xfd/0x1c2
[<ffffffff8112b54c>] filp_close+0x6d/0x78
[<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit 6331c28c96
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The system filter can be used to set multiple event filters that
exist within the system. But currently it displays the last filter
written that does not necessarily correspond to the filters within
the system. The system filter itself is not used to filter any events.
The system filter is just a means to set filters of the events within
it.
Because this causes an ambiguous state when the system filter reads
a filter string but the events within the system have different strings
it is best to just show a boiler plate:
### global filter ###
# Use this to set filters for multiple events.
# Only events with the given fields will be affected.
# If no events are modified, an error message will be displayed here.
If an error occurs while writing to the system filter, the system
filter will replace the boiler plate with the error message as it
currently does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These files were getting <linux/module.h> via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason. Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
perf symbols: Increase symbol KSYM_NAME_LEN size
perf hists browser: Refuse 'a' hotkey on non symbolic views
perf ui browser: Use libslang to read keys
perf tools: Fix tracing info recording
perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
perf hists: Don't consider filtered entries when calculating column widths
perf hists: Don't decay total_period for filtered entries
perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
perf hists browser: Do not exit on tab key with single event
perf annotate browser: Don't change selection line when returning from callq
perf tools: handle endianness of feature bitmap
perf tools: Add prelink suggestion to dso update message
perf script: Fix unknown feature comment
perf hists browser: Apply the dso and thread filters when merging new batches
perf hists: Move the dso and thread filters from hist_browser
perf ui browser: Honour the xterm colors
perf top tui: Give color hints just on the percentage, like on --stdio
perf ui browser: Make the colors configurable and change the defaults
perf tui: Remove unneeded call to newtCls on startup
perf hists: Don't format the percentage on hist_entry__snprintf
...
Fix up conflicts in arch/x86/kernel/kprobes.c manually.
Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?). But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..
Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge. Make
sure that new use also uses the raw accessor functions.
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock()
lockdep: Comment all warnings
lib: atomic64: Change the type of local lock to raw_spinlock_t
locking, lib/atomic64: Annotate atomic64_lock::lock as raw
locking, x86, iommu: Annotate qi->q_lock as raw
locking, x86, iommu: Annotate irq_2_ir_lock as raw
locking, x86, iommu: Annotate iommu->register_lock as raw
locking, dma, ipu: Annotate bank_lock as raw
locking, ARM: Annotate low level hw locks as raw
locking, drivers/dca: Annotate dca_lock as raw
locking, powerpc: Annotate uic->lock as raw
locking, x86: mce: Annotate cmci_discover_lock as raw
locking, ACPI: Annotate c3_lock as raw
locking, oprofile: Annotate oprofilefs lock as raw
locking, video: Annotate vga console lock as raw
locking, latencytop: Annotate latency_lock as raw
locking, timer_stats: Annotate table_lock as raw
locking, rwsem: Annotate inner lock as raw
locking, semaphores: Annotate inner lock as raw
locking, sched: Annotate thread_group_cputimer as raw
...
Fix up conflicts in kernel/posix-cpu-timers.c manually: making
cputimer->cputime a raw lock conflicted with the ABBA fix in commit
bcd5cff721 ("cputimer: Cure lock inversion").
The trace_pipe_raw handler holds a cached page from the time the file
is opened to the time it is closed. The cached page is used to handle
the case of the user space buffer being smaller than what was read from
the ring buffer. The left over buffer is held in the cache so that the
next read will continue where the data left off.
After EOF is returned (no more data in the buffer), the index of
the cached page is set to zero. If a user app reads the page again
after EOF, the check in the buffer will see that the cached page
is less than page size and will return the cached page again. This
will cause reading the trace_pipe_raw again after EOF to return
duplicate data, making the output look like the time went backwards
but instead data is just repeated.
The fix is to not reset the index right after all data is read
from the cache, but to reset it after all data is read and more
data exists in the ring buffer.
Cc: stable <stable@kernel.org>
Reported-by: Jeremy Eder <jeder@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_enabled option is deprecated.
To start/stop tracing, write to /sys/kernel/debug/tracing/tracing_on
without tracing_enabled. This patch is based on Linux 3.1.0-rc1
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Link: http://lkml.kernel.org/r/1313127022-23830-1-git-send-email-leemgs1@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When doing intense tracing, the kmalloc inside trace_marker can
introduce side effects to what is being traced.
As trace_marker() is used by userspace to inject data into the
kernel ring buffer, it needs to do so with the least amount
of intrusion to the operations of the kernel or the user space
application.
As the ring buffer is designed to write directly into the buffer
without the need to make a temporary buffer, and userspace already
went through the hassle of knowing how big the write will be,
we can simply pin the userspace pages and write the data directly
into the buffer. This improves the impact of tracing via trace_marker
tremendously!
Thanks to Peter Zijlstra and Thomas Gleixner for pointing out the
use of get_user_pages_fast() and kmap_atomic().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the function tracer is very intrusive, lots of self checks are
performed on the tracer and if something is found to be strange
it will shut itself down keeping it from corrupting the rest of the
kernel. This shutdown may still allow functions to be traced, as the
tracing only stops new modifications from happening. Trying to stop
the function tracer itself can cause more harm as it requires code
modification.
Although a WARN_ON() is executed, a user may not notice it. To help
the user see that something isn't right with the tracing of the system
a big warning is added to the output of the tracer that lets the user
know that their data may be incomplete.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix kprobe-tracer not to delete a probe if the probe is in use.
In that case, delete operation will return -EBUSY.
This bug can cause a kernel panic if enabled probes are deleted
during perf record.
(Add some probes on functions)
sh-4.2# perf probe --del probe:\*
sh-4.2# exit
(kernel panic)
This is originally reported on the fedora bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=742383
I've also checked that this problem doesn't happen on
tracepoints when module removing because perf event
locks target module.
$ sudo ./perf record -e xfs:\* -aR sh
sh-4.2# rmmod xfs
ERROR: Module xfs is in use
sh-4.2# exit
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.203 MB perf.data (~8862 samples) ]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20111004104438.14591.6553.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* pm-runtime:
PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
PM / Runtime: Replace dev_dbg() with trace_rpm_*()
PM / Runtime: Introduce trace points for tracing rpm_* functions
PM / Runtime: Don't run callbacks under lock for power.irq_safe set
USB: Add wakeup info to debugging messages
PM / Runtime: pm_runtime_idle() can be called in atomic context
PM / Runtime: Add macro to test for runtime PM events
PM / Runtime: Add might_sleep() to runtime PM functions
Do not build kernel/trace/rpm-traces.c if CONFIG_PM_RUNTIME is not
set, which avoids a build failure.
[rjw: Added the changelog and modified the subject slightly.]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch introduces 3 trace points to prepare for tracing
rpm_idle/rpm_suspend/rpm_resume functions, so we can use these
trace points to replace the current dev_dbg().
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If irqs are disabled when preemption count reaches zero, the
preemptirqsoff tracer should not flag that as the end.
When interrupts are enabled and preemption count is not zero
the preemptirqsoff correctly continues its tracing.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When debugging tight race conditions, it can be helpful to have a
synchronized tracing method. Although in most cases the global clock
provides this functionality, if timings is not the issue, it is more
comforting to know that the order of events really happened in a precise
order.
Instead of using a clock, add a "counter" that is simply an incrementing
atomic 64bit counter that orders the events as they are perceived to
happen.
The trace_clock_counter() is added from the attempt by Peter Zijlstra
trying to convert the trace_clock_global() to it. I took Peter's counter
code and made trace_clock_counter() instead, and added it to the choice
of clocks. Just echo counter > /debug/tracing/trace_clock to activate
it.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing locks can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The stats file under per_cpu folder provides the number of entries,
overruns and other statistics about the CPU ring buffer. However, the
numbers do not provide any indication of how full the ring buffer is in
bytes compared to the overall size in bytes. Also, it is helpful to know
the rate at which the cpu buffer is filling up.
This patch adds an entry "bytes: " in printed stats for per_cpu ring
buffer which provides the actual bytes consumed in the ring buffer. This
field includes the number of bytes used by recorded events and the
padding bytes added when moving the tail pointer to next page.
It also adds the following time stamps:
"oldest event ts:" - the oldest timestamp in the ring buffer
"now ts:" - the timestamp at the time of reading
The field "now ts" provides a consistent time snapshot to the userspace
when being read. This is read from the same trace clock used by tracing
event timestamps.
Together, these values provide the rate at which the buffer is filling
up, from the formula:
bytes / (now_ts - oldest_event_ts)
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current file "buffer_size_kb" reports the size of per-cpu buffer and
not the overall memory allocated which could be misleading. A new file
"buffer_total_size_kb" adds up all the enabled CPU buffer sizes and
reports it. This is only a readonly entry.
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The self testing for event filters does not really need preemption
disabled as there are no races at the time of testing, but the functions
it calls uses rcu_dereference_sched() which will complain if preemption
is not disabled.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding automated tests running as late_initcall. Tests are
compiled in with CONFIG_FTRACE_STARTUP_TEST option.
Adding test event "ftrace_test_filter" used to simulate
filter processing during event occurance.
String filters are compiled and tested against several
test events with different values.
Also testing that evaluation of explicit predicates is ommited
due to the lazy filter evaluation.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
