DRM_DUMB_VGA_DAC is a user-visible symbol. Selecting it can cause unmet
direct dependencies such as this (on i386, randconfig):
warning: (DRM_PL111) selects DRM_DUMB_VGA_DAC which has unmet direct dependencies (HAS_IOMEM && DRM && DRM_BRIDGE && OF)
This is because DRM_DUMB_VGA_DAC depends on OF while DRM_PL111 does not.
It does indirectly depend on OF via the ARM and ARM64 dependencies, but
since it can also be enabled under COMPILE_TEST, randconfig can find a
case where DRM_PL111 is selected without pulling in OF and not meeting
the dependency for DRM_DUMB_VGA_DAC.
Since select is "heavy handed", DRM_DUMB_VGA_DAC is going to be enabled
regardless of the above warning and causes the following build error:
../drivers/gpu/drm/bridge/dumb-vga-dac.c: In function 'dumb_vga_probe':
../drivers/gpu/drm/bridge/dumb-vga-dac.c:207:13: error: 'struct drm_bridge' has no member named 'of_node'
vga->bridge.of_node = pdev->dev.of_node;
See Documentation/kbuild/kconfig-language.txt, "reverse dependencies".
Fixes: 49f81d80ab ("drm/pl111: Support handling bridge timings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Archit Taneja <archit@cradlewise.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220102903.27787-1-thierry.reding@gmail.com
If the bridge has a too strict setup time for the incoming
signals, we may not be fast enough and then we need to
compensate by outputting the signal on the inverse clock
edge so it is for sure stable when the bridge samples it.
Since bridges in difference to panels does not expose their
connectors, make the connector optional in the display
setup code.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-4-linus.walleij@linaro.org
This replaces the custom connector in the PL111 with the
panel bridge helper.
This works nicely for all standard panels, but since there
are several PL11x-based systems that will need to use the dumb
VGA connector bridge we use drm_of_find_panel_or_bridge()
and make some headroom for dealing with bridges that are
not panels as well, and drop a TODO in the code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908124709.4758-3-linus.walleij@linaro.org
When DRM_PANEL is disabled, we get a link error for pl111:
drivers/gpu/built-in.o: In function `pl111_connector_destroy':
pl111_connector.c:(.text+0x3487e6): undefined reference to `drm_panel_detach'
For some reason this only appears in the latest linux-next
although the driver appears to have used the symbol for a few
weeks already. The solution however is simple enough, we just
need to add a 'select' statement.
Fixes: bed41005e6 ("drm/pl111: Initial drm/kms driver for pl111")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530092224.1204037-1-arnd@arndb.de
This is required for the panel to work on bcm911360, where CLCDCLK is
the fixed 200Mhz AXI41 clock. The rate set is still passed up to the
CLCDCLK, for platforms that have a settable rate on that one.
v2: Set SET_RATE_PARENT (caught by Linus Walleij), depend on
COMMON_CLK.
v3: Mark the clk_ops static (caught by Stephen).
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170508193348.30236-1-eric@anholt.net
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
