"do {} while" in page_pool_refill_alloc_cache will always
refill page once whether refill is true or false, and whether
alloc.count of pool is less than PP_ALLOC_CACHE_REFILL or not
this is wrong, and will cause overflow of pool->alloc.cache
the caller of __page_pool_get_cached should provide guarantee
that pool->alloc.cache is safe to access, so in_serving_softirq
should be removed as suggested by Jesper Dangaard Brouer in
https://patchwork.ozlabs.org/patch/1233713/
so fix this issue by calling page_pool_refill_alloc_cache()
only when pool->alloc.count is zero
Fixes: 44768decb7 ("page_pool: handle page recycle for NUMA_NO_NODE condition")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-02-12
This series contains fixes to only the ice driver.
Dave fixes logic flaws in the DCB rebuild function which is used after a
reset. Also fixed a configuration issue when switching between firmware
and software LLDP mode where the number of TLV's configured was getting
out of sync with what lldpad thinks is configured.
Paul fixes how the driver displayed all the supported and advertised
link modes by basing it on the PHY capabilities, and in the process
cleaned up a lot of code.
Brett fixes duplicate receive tail bumps by comparing the value we are
writing to tail with the previously written tail value. Also cleaned up
workarounds that are no longer needed with the latest NVM images.
Anirudh cleaned up unnecessary CONFIG_PCI_IOV wrappers. Updated the
driver to use ice_pf_to_dev() instead of &pf->pdev->dev or
&vsi->back->pdev->dev. Cleaned up the string format in print function
calls to remove newlines where applicable.
Akeem updates the link message logging to include "Full Duplex" and
"Negotiated", to help distinguish from "Requested" for FEC.
Bruce fixes and consolidates the logging of firmware/NVM information
during driver load, since the information is duplicate of what is
available via ethtool. Fixed the checking of the Unit Load Status bits
after reset to ensure they are 0x7FF before continuing, by updating the
mask. Cleanup up possible NULL dereferences that were created by a
previous commit.
Ben fixes the driver to use the correct netif_msg_tx/rx_error() to
determine whether to print the MDD event type.
Tony provides several trivial fixes, which include whitespace, typos,
function header comments, reverse Christmas tree issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure we don't release the delegation cred during the call to
nfs4_proc_delegreturn().
Fixes: ee05f45677 ("NFSv4: Fix races between open and delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The call to nfs_do_return_delegation() needs to be taken without
any RCU locks. Add a refcount to make sure the delegation remains
pinned in memory until we're done.
Fixes: ee05f45677 ("NFSv4: Fix races between open and delegreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Turning caching off for writes on the server should improve performance.
Fixes: fba83f3411 ("NFS: Pass "privileged" value to nfs4_init_sequence()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The @nents value that was passed to ib_dma_map_sg() has to be passed
to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to
concatenate sg entries, it will return a different nents value than
it was passed.
The bug was exposed by recent changes to the AMD IOMMU driver, which
enabled sg entry concatenation.
Looking all the way back to commit 4143f34e01 ("xprtrdma: Port to
new memory registration API") and reviewing other kernel ULPs, it's
not clear that the frwr_map() logic was ever correct for this case.
Reported-by: Andre Tomt <andre@tomt.net>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 904cdbd41d ("jbd2: clear dirty flag when revoking a buffer from
an older transaction") set the BH_Freed flag when forgetting a metadata
buffer which belongs to the committing transaction, it indicate the
committing process clear dirty bits when it is done with the buffer. But
it also clear the BH_Mapped flag at the same time, which may trigger
below NULL pointer oops when block_size < PAGE_SIZE.
rmdir 1 kjournald2 mkdir 2
jbd2_journal_commit_transaction
commit transaction N
jbd2_journal_forget
set_buffer_freed(bh1)
jbd2_journal_commit_transaction
commit transaction N+1
...
clear_buffer_mapped(bh1)
ext4_getblk(bh2 ummapped)
...
grow_dev_page
init_page_buffers
bh1->b_private=NULL
bh2->b_private=NULL
jbd2_journal_put_journal_head(jh1)
__journal_remove_journal_head(hb1)
jh1 is NULL and trigger oops
*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has
already been unmapped.
For the metadata buffer we forgetting, we should always keep the mapped
flag and clear the dirty flags is enough, so this patch pick out the
these buffers and keep their BH_Mapped flag.
Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com
Fixes: 904cdbd41d ("jbd2: clear dirty flag when revoking a buffer from an older transaction")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
There is no need to delay the clearing of b_modified flag to the
transaction committing time when unmapping the journalled buffer, so
just move it to the journal_unmap_buffer().
Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
DIR_INDEX has been introduced as a compat ext4 feature. That means that
even kernels / tools that don't understand the feature may modify the
filesystem. This works because for kernels not understanding indexed dir
format, internal htree nodes appear just as empty directory entries.
Index dir aware kernels then check the htree structure is still
consistent before using the data. This all worked reasonably well until
metadata checksums were introduced. The problem is that these
effectively made DIR_INDEX only ro-compatible because internal htree
nodes store checksums in a different place than normal directory blocks.
Thus any modification ignorant to DIR_INDEX (or just clearing
EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch
and trigger kernel errors. So we have to be more careful when dealing
with indexed directories on filesystems with checksumming enabled.
1) We just disallow loading any directory inodes with EXT4_INDEX_FL when
DIR_INDEX is not enabled. This is harsh but it should be very rare (it
means someone disabled DIR_INDEX on existing filesystem and didn't run
e2fsck), e2fsck can fix the problem, and we don't want to answer the
difficult question: "Should we rather corrupt the directory more or
should we ignore that DIR_INDEX feature is not set?"
2) When we find out htree structure is corrupted (but the filesystem and
the directory should in support htrees), we continue just ignoring htree
information for reading but we refuse to add new entries to the
directory to avoid corrupting it more.
Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
A recent commit, 9803387c55 ("ext4: validate the
debug_want_extra_isize mount option at parse time"), moved mount-time
checks around. One of those changes moved the inode size check before
the blocksize variable was set to the blocksize of the file system.
After 9803387c55 was set to the minimum allowable blocksize, which
in practice on most systems would be 1024 bytes. This cuased file
systems with inode sizes larger than 1024 bytes to be rejected with a
message:
EXT4-fs (sdXX): unsupported inode size: 4096
Fixes: 9803387c55 ("ext4: validate the debug_want_extra_isize mount option at parse time")
Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu
Reported-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
This patch enables the selftests for the s390 specific protected key
AES (PAES) cipher implementations:
* cbc-paes-s390
* ctr-paes-s390
* ecb-paes-s390
* xts-paes-s390
PAES is an AES cipher but with encrypted ('protected') key
material. However, the paes ciphers are able to derive an protected
key from clear key material with the help of the pkey kernel module.
So this patch now enables the generic AES tests for the paes
ciphers. Under the hood the setkey() functions rearrange the clear key
values as clear key token and so the pkey kernel module is able to
provide protected key blobs from the given clear key values. The
derived protected key blobs are then used within the paes cipers and
should produce the very same results as the generic AES implementation
with the clear key values.
The s390-paes cipher testlist entries are surrounded
by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't
make any sense on non s390 platforms or without the PAES
cipher implementation.
Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Coverity reports that conditions checking quota limits in ext4_statfs()
contain dead code. Indeed it is right and current conditions can be
simplified.
Link: https://lore.kernel.org/r/20200130111148.10766-1-jack@suse.cz
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Macro nr_to_fifo_front() is only used once in btree_flush_write(),
it is unncessary indeed. This patch removes this macro and does
calculation directly in place.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 1df3877ff6.
In my testing, sometimes even all the cached btree nodes are freed,
creating gc and allocator kernel threads may still fail. Finally it
turns out that kthread_run() may fail if there is pending signal for
current task. And the pending signal is sent from OOM killer which
is triggered by memory consuption in bch_btree_check().
Therefore explicitly shrinking bcache btree node here does not help,
and after the shrinker callback is improved, as well as pending signals
are ignored before creating kernel threads, now such operation is
unncessary anymore.
This patch reverts the commit 1df3877ff6 ("bcache: shrink btree node
cache after bch_btree_check()") because we have better improvement now.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When run a cache set, all the bcache btree node of this cache set will
be checked by bch_btree_check(). If the bcache btree is very large,
iterating all the btree nodes will occupy too much system memory and
the bcache registering process might be selected and killed by system
OOM killer. kthread_run() will fail if current process has pending
signal, therefore the kthread creating in run_cache_set() for gc and
allocator kernel threads are very probably failed for a very large
bcache btree.
Indeed such OOM is safe and the registering process will exit after
the registration done. Therefore this patch flushes pending signals
during the cache set start up, specificly in bch_cache_allocator_start()
and bch_gc_thread_start(), to make sure run_cache_set() won't fail for
large cahced data set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 66f2d19f81 ("ALSA: pcm: Fix memory leak at closing a
stream without hw_free") tried to fix the regression wrt the missing
hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl.
However, the code change dropped mistakenly the state check, resulting
in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called
beforehand. For most drivers, this is almost harmless, but the
drivers like SOF show another regression now.
This patch adds the state condition check before calling do_hw_free()
at releasing the stream for avoiding the double hw_free calls.
Fixes: 66f2d19f81 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free")
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When run stress tests with RXE, the following Call Traces often occur
watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0]
...
Call Trace:
<IRQ>
create_object+0x3f/0x3b0
kmem_cache_alloc_node_trace+0x129/0x2d0
__kmalloc_reserve.isra.52+0x2e/0x80
__alloc_skb+0x83/0x270
rxe_init_packet+0x99/0x150 [rdma_rxe]
rxe_requester+0x34e/0x11a0 [rdma_rxe]
rxe_do_task+0x85/0xf0 [rdma_rxe]
tasklet_action_common.isra.21+0xeb/0x100
__do_softirq+0xd0/0x298
irq_exit+0xc5/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
...
The root cause is that tasklet is actually a softirq. In a tasklet
handler, another softirq handler is triggered. Usually these softirq
handlers run on the same cpu core. So this will cause "soft lockup Bug".
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The cmd and index variables declared as u16 and the result is supposed to
be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) <<
16" to be u64 and leaves the end result to be u16.
Fixes: 7be76bef32 ("IB/mlx5: Introduce VAR object and its alloc/destroy methods")
Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When disassociating a device from umad we must ensure that the sysfs
access is prevented before blocking the fops, otherwise assumptions in
syfs don't hold:
CPU0 CPU1
ib_umad_kill_port() ibdev_show()
port->ib_dev = NULL
dev_name(port->ib_dev)
The prior patch made an error in moving the device_destroy(), it should
have been split into device_del() (above) and put_device() (below). At
this point we already have the split, so move the device_del() back to its
original place.
kernel stack
PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
RIP: 0010:ibdev_show+0x18/0x50 [ib_umad]
RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000
RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870
RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000
R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40
R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58
FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0
Call Trace:
dev_attr_show+0x15/0x50
sysfs_kf_seq_show+0xb8/0x1a0
seq_read+0x12d/0x350
vfs_read+0x89/0x140
ksys_read+0x55/0xd0
do_syscall_64+0x55/0x1b0
entry_SYSCALL_64_after_hwframe+0x44/0xa9:
Fixes: cf7ad30302 ("IB/umad: Avoid destroying device while it is accessed")
Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As in the prior patch, the devx code is not fully cleaning up its
event_lists before finishing driver_destroy allowing a later read to
trigger user after free conditions.
Re-arrange things so that the event_list is always empty after destroy and
ensure it remains empty until the file is closed.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the uobject file scheme was revised to allow device disassociation
from the file it became possible for read() to still happen the driver
destroys the uobject.
The old clode code was not tolerant to concurrent read, and when it was
moved to the driver destroy it creates a bug.
Ensure the event_list is empty after driver destroy by adding the missing
list_del(). Otherwise read() can trigger a use after free and double
kfree.
Fixes: f7c8416cce ("RDMA/core: Simplify destruction of FD uobjects")
Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All created csrow objects must be removed in the error path of
edac_create_csrow_objects(). The objects have been added as devices.
They need to be removed by doing a device_del() *and* put_device() call
to also free their memory. The missing put_device() leaves a memory
leak. Use device_unregister() instead of device_del() which properly
unregisters the device doing both.
Fixes: 7adc05d2dc ("EDAC/sysfs: Drop device references properly")
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-4-rrichter@marvell.com
A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and
DEBUG_KMEMLEAK set, revealed several issues when removing an mci device:
1) Use-after-free:
On 27.11.19 17:07:33, John Garry wrote:
> [ 22.104498] BUG: KASAN: use-after-free in
> edac_remove_sysfs_mci_device+0x148/0x180
The use-after-free is caused by the mci_for_each_dimm() macro called in
edac_remove_sysfs_mci_device(). The iterator was introduced with
c498afaf7d ("EDAC: Introduce an mci_for_each_dimm() iterator").
The iterator loop calls device_unregister(&dimm->dev), which removes
the sysfs entry of the device, but also frees the dimm struct in
dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(),
the dimm struct is accessed again, after having been freed already.
The fix is to free all the mci device's subsequent dimm and csrow
objects at a later point, in _edac_mc_free(), when the mci device itself
is being freed.
This keeps the data structures intact and the mci device can be
fully used until its removal. The change allows the safe usage of
mci_for_each_dimm() to release dimm devices from sysfs.
2) Memory leaks:
Following memory leaks have been detected:
# grep edac /sys/kernel/debug/kmemleak | sort | uniq -c
1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows
16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels
16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn]
1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms
34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc()
All leaks are from memory allocated by edac_mc_alloc().
Note: The test above shows that edac_mc_alloc() was called here from
ghes_edac_register(), thus both functions show up in the stack trace
but the module causing the leaks is edac_mc. The comments with the data
structures involved were made manually by analyzing the objdump.
The data structures listed above and created by edac_mc_alloc() are
not properly removed during device removal, which is done in
edac_mc_free().
There are two paths implemented to remove the device depending on device
registration, _edac_mc_free() is called if the device is not registered
and edac_unregister_sysfs() otherwise.
The implemenations differ. For the sysfs case, the mci device removal
lacks the removal of subsequent data structures (csrows, channels,
dimms). This causes the memory leaks (see mci_attr_release()).
[ bp: Massage commit message. ]
Fixes: c498afaf7d ("EDAC: Introduce an mci_for_each_dimm() iterator")
Fixes: faa2ad09c0 ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.")
Fixes: 7a623c0390 ("edac: rewrite the sysfs code to use struct device")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
The legacy version of get_scanout_position() was only useful while
drivers still used drm_driver.get_scanout_position(). With no such
drivers left, the related typedef and code can be removed
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-23-tzimmermann@suse.de
All non-legacy users of VBLANK functions in struct drm_driver have been
converted to use the respective interfaces in struct drm_crtc_funcs. The
remaining users of VBLANK callbacks in struct drm_driver are legacy drivers
with userspace modesetting.
All users of struct drm_driver.get_scanout_position() have been
converted to the respective CRTC helper function. Remove the callback
from struct drm_driver.
There are no users left of get_vblank_timestamp(), so the callback is
being removed. The other VBLANK callbacks are being moved to the legacy
section at the end of struct drm_driver.
Also removed is drm_calc_vbltimestamp_from_scanoutpos(). Callers of this
function have been converted to use the CRTC instead.
v4:
* more readable code for setting high_prec (Ville, Jani)
v2:
* merge with removal of struct drm_driver.get_scanout_position()
* remove drm_calc_vbltimestamp_from_scanoutpos()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-22-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert vmwgfx over.
v2:
* remove accidental whitespace fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-21-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert vkms over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-20-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert sti over.
v2:
* remove unnecessary include of sti_crtc.h from sti_drv.c
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-17-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert stm over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-16-tzimmermann@suse.de
The callback struct drm_driver.get_scanout_position() is deprecated in
favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert stm
over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-15-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert msm over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-14-tzimmermann@suse.de
The callback struct drm_driver.get_scanout_position() is deprecated in
favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert
radeon over.
v4:
* 80-character line fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-11-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert nouvean over.
v4:
* add argument names in function declaration
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-10-tzimmermann@suse.de
The callback struct drm_driver.get_scanout_position() is deprecated in
favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert
nouveau over.
v4:
* add argument names in function declaration
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-9-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of their
equivalents in struct drm_crtc_funcs. Convert i915 over.
The callback struct drm_driver.get_scanout_position() is deprecated
in favor of struct drm_crtc_helper_funcs.get_scanout_position().
i915 doesn't use CRTC helpers. Instead pass i915's implementation of
get_scanout_position() to DRM core's
drm_crtc_vblank_helper_get_vblank_timestamp_internal().
v3:
* rename dcrtc to _crtc
* use intel_ prefix for i915_crtc_get_vblank_timestamp()
* update for drm_crtc_vblank_helper_get_vblank_timestamp_internal()
v2:
* use DRM's implementation of get_vblank_timestamp()
* simplify function names
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-8-tzimmermann@suse.de
VBLANK callbacks in struct drm_driver are deprecated in favor of
their equivalents in struct drm_crtc_funcs. Convert amdgpu over.
v2:
* don't wrap existing functions; change signature instead
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-6-tzimmermann@suse.de
The callback struct drm_driver.get_scanout_position() is deprecated in
favor of struct drm_crtc_helper_funcs.get_scanout_position(). Convert
amdgpu over.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-5-tzimmermann@suse.de
The callback get_vblank_timestamp() is currently located in struct
drm_driver, but really belongs into struct drm_crtc_funcs. Add an
equivalent there. Driver will be converted in separate patches.
The default implementation is drm_calc_vbltimestamp_from_scanoutpos().
The patch adds drm_crtc_vblank_helper_get_vblank_timestamp(), which is
an implementation for the CRTC callback.
v4:
* more readable code for setting high_prec (Ville, Jani)
v3:
* use refactored timestamp calculation to minimize duplicated code
* do more checks for crtc != NULL to support legacy drivers
v2:
* rename helper to drm_crtc_vblank_helper_get_vblank_timestamp()
* replace drm_calc_vbltimestamp_from_scanoutpos() with
drm_crtc_vblank_helper_get_vblank_timestamp() in docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-4-tzimmermann@suse.de
The new callback get_scanout_position() reads the current location
of the scanout process. The operation is currently located in struct
drm_driver, but really belongs to the CRTC. Drivers will be converted
in separate patches.
To help with the conversion, the timestamp calculation has been
moved from drm_calc_vbltimestamp_from_scanoutpos() to
drm_crtc_vblank_helper_get_vblank_timestamp_internal(). The helper
function supports the new and old interface of get_scanout_position().
drm_calc_vbltimestamp_from_scanoutpos() remains as a wrapper around
the new function.
Callback functions return the scanout position from the CRTC. The
legacy version of the interface receives the device and pipe index,
the modern version receives a pointer to the CRTC. We keep the
legacy version until all drivers have been converted.
v4:
* 80-character line fixes
v3:
* refactor drm_calc_vbltimestamp_from_scanoutpos() to minimize
code duplication
* define types for get_scanout_position() callbacks
v2:
* fix logical op in drm_calc_vbltimestamp_from_scanoutpos()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-3-tzimmermann@suse.de
VBLANK interrupts can be disabled immediately or with a delay, where the
latter is the default. The former option can be selected by setting
get_vblank_timestamp and enabling vblank_disable_immediate in struct
drm_device. Simplify the code in preparation of the removal of struct
drm_device.get_vblank_timestamp.
v3:
* remove internal setup of vblank_disable_immediate
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-2-tzimmermann@suse.de