On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:
[root@m35lp76 perf]# fgrep qeth /proc/modules
qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
...
[root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
0x000003ff800b3990
[root@m35lp76 perf]#
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit 203d8a4aa6 ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
[root@m35lp76 perf] # ./perf report -D
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Output after:
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 203d8a4aa6 ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to point to the correct location without -I flags.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190731225441.233800-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix a spelling typo in a variable name in the Documentation Makefile.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cpu_map__snprint_mask() would write to illegal memory pointed by
zalloc(0) when there is only one cpu.
This patch fixes the calculation and adds sanity check against the input
parameters.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 4400ac8a9a ("perf cpumap: Introduce cpu_map__snprint_mask()")
Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The buffer containing the string used to set cpumask is overwritten at
the end of the string later in cpu_map__snprint_mask due to not enough
memory space, when there is only one cpu.
And thus causes the following failure:
$ perf ftrace ls
failed to reset ftrace
$
This patch fixes the calculation of the cpumask string size.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: dc23103278 ("perf ftrace: Add support for -a and -C option")
Link: http://lkml.kernel.org/r/1564734592-15624-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code to disassemble BPF programs uses binutil's disassembling
routines, and those use in turn fprintf to print to a memstream FILE,
adding a newline at the end of each line, which ends up confusing the
TUI routines called from:
annotate_browser__write()
annotate_line__write()
annotate_browser__printf()
ui_browser__vprintf()
SLsmg_vprintf()
The SLsmg_vprintf() function in the slang library gets confused with the
terminating newline, so make the disasm_line__parse() function that
parses the lines produced by the BPF specific disassembler (that uses
binutil's libopcodes) and the lines produced by the objdump based
disassembler used for everything else (and that doesn't adds this
terminating newline) trim the end of the line in addition of the
beginning.
This way when disasm_line->ops.raw, i.e. for instructions without a
special scnprintf() method, we'll not have that \n getting in the way of
filling the screen right after the instruction with spaces to avoid
leaving what was on the screen before and thus garbling the annotation
screen, breaking scrolling, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull cifs fixes from Steve French:
"Six small SMB3 fixes, two for stable"
* tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL
smb3: update TODO list of missing features
smb3: send CAP_DFS capability during session setup
SMB3: Fix potential memory leak when processing compound chain
SMB3: Fix deadlock in validate negotiate hits reconnect
cifs: fix rmmod regression in cifs.ko caused by force_sig changes
A deadlock with this stacktrace was observed.
The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.
In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.
PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0"
#0 [ffff8813dedfb938] __schedule at ffffffff8173f405
#1 [ffff8813dedfb990] schedule at ffffffff8173fa27
#2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242
PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1"
#0 [ffff88272f5af228] __schedule at ffffffff8173f405
#1 [ffff88272f5af280] schedule at ffffffff8173fa27
#2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
#3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
#4 [ffff88272f5af330] mutex_lock at ffffffff81742133
#5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
#12 [ffff88272f5af760] new_slab at ffffffff811f4523
#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
#23 [ffff88272f5afec0] kthread at ffffffff810a8428
#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the authorized_default and interface_authorized_default
attributes for HCD are set up after the uevent has been sent to userland.
This creates a race condition where userland may fail to access this
file when processing the event. Move the appending of these attributes
earlier relying on the usb_bus_notify dispatcher.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 89e524c04f ("loop: Fix mount(2) failure due to race with
LOOP_SET_FD") converted blkdev_get() to use the new helpers for
finishing claiming of a block device. However the conversion botched the
error handling in blkdev_get() and thus the bdev has been marked as held
even in case __blkdev_get() returned error. This led to occasional
warnings with block/001 test from blktests like:
kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0
Correct the error handling.
CC: stable@vger.kernel.org
Fixes: 89e524c04f ("loop: Fix mount(2) failure due to race with LOOP_SET_FD")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As reported in [1], the call bfq_init_rq(rq) may return NULL in case
of OOM (in particular, if rq->elv.icq is NULL because memory
allocation failed in failed in ioc_create_icq()).
This commit handles this circumstance.
[1] https://lkml.org/lkml/2019/7/22/824
Cc: Hsin-Yi Wang <hsinyi@google.com>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Hsin-Yi Wang <hsinyi@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 13a857a4c4 ("block, bfq: detect wakers and
unconditionally inject their I/O"), every bfq_queue has a pointer to a
waker bfq_queue and a list of the bfq_queues it may wake. In this
respect, when a bfq_queue, say Q, remains with no I/O source attached
to it, Q cannot be woken by any other bfq_queue, and cannot wake any
other bfq_queue. Then Q must be removed from the woken list of its
possible waker bfq_queue, and all bfq_queues in the woken list of Q
must stop having a waker bfq_queue.
Q remains with no I/O source in two cases: when the last process
associated with Q exits or when such a process gets associated with a
different bfq_queue. Unfortunately, commit 13a857a4c4 ("block, bfq:
detect wakers and unconditionally inject their I/O") performed the
above updates only in the first case.
This commit fixes this bug by moving these updates to when Q gets
freed. This is a simple and safe way to handle all cases, as both the
above events, process exit and re-association, lead to Q being freed
soon, and because dangling references would come out only after Q gets
freed (if no update were performed).
Fixes: 13a857a4c4 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 13a857a4c4 ("block, bfq: detect wakers and
unconditionally inject their I/O"), BFQ stores, in a per-device
pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O
request completed. If some bfq_queue receives new I/O right after the
last request of last_completed_rq_bfqq has been completed, then
last_completed_rq_bfqq may be a waker bfq_queue.
But if the bfq_queue last_completed_rq_bfqq points to is freed, then
last_completed_rq_bfqq becomes a dangling reference. This commit
resets last_completed_rq_bfqq if the pointed bfq_queue is freed.
Fixes: 13a857a4c4 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently empty .bss checks performed do not pay attention to "common
objects" in object files which end up in .bss section eventually.
The "size" tool is a part of binutils and since version 2.18 provides
"--common" command line option, which allows to account "common objects"
sizes in .bss section size. Utilize "size --common" to perform accurate
check that .bss section is unused. Besides that the size tool handles
object files without .bss section gracefully and doesn't require
additional objdump run.
The linux kernel requires binutils 2.20 since 4.13.
Kbuild exports OBJSIZE to reference the right size tool.
Link: http://lkml.kernel.org/r/patch-2.thread-2257a1.git-2257a1c53d4a.your-ad-here.call-01565088755-ext-5120@work.hours
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Define and export OBJSIZE variable for "size" tool from binutils to be
used in architecture specific Makefiles (naming the variable just "SIZE"
would be too risky). In particular this tool is useful to perform checks
that early boot code is not using bss section (which might have not been
zeroed yet or intersects with initrd or other files boot loader might
have put right after the linux kernel).
Link: http://lkml.kernel.org/r/patch-1.thread-2257a1.git-188f5a3d81d5.your-ad-here.call-01565088755-ext-5120@work.hours
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 4a6ef8e37c ("pwm: Add support referencing PWMs from ACPI")
made pwm_get unconditionally return the acpi_pwm_get return value if
the device passed to pwm_get has an ACPI fwnode.
But even if the passed in device has an ACPI fwnode, it does not
necessarily have the necessary ACPI package defining its pwm bindings,
especially since the binding / API of this ACPI package has only been
introduced very recently.
Up until now X86/ACPI devices which use a separate pwm controller for
controlling their LCD screen's backlight brightness have been relying
on the static lookup-list to get their pwm.
pwm_get unconditionally returning the acpi_pwm_get return value breaks
this, breaking backlight control on these devices.
This commit fixes this by making pwm_get fall back to the static
lookup-list if acpi_pwm_get returns -ENOENT.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571
Reported-by: youling257@gmail.com
Fixes: 4a6ef8e37c ("pwm: Add support referencing PWMs from ACPI")
Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
We have to drop the mutex before we close() upon disconnect()
as close() needs the lock. This is safe to do by dropping the
mutex as intfdata is already set to NULL, so open() will fail.
Fixes: 03f36e885f ("USB: open disconnect race in iowarrior")
Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when too many retries have occurred there is a memory
leak on the allocation for reply on the error return path. Fix
this by kfree'ing reply before returning.
Addresses-Coverity: ("Resource leak")
Fixes: a9cd9c044a ("drm/vmwgfx: Add a check to handle host message failure")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.
To fix the above issue, free 'b->packets' before returning the error code.
Fixes: 31ef9134eb ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit c66d4bd110 ("genirq/affinity: Add new callback for
(re)calculating interrupt sets"), irq_create_affinity_masks() returns
NULL in case of single vector. This change has caused regression on some
drivers, such as lpfc.
The problem is that single vector requests can happen in some generic cases:
1) kdump kernel
2) irq vectors resource is close to exhaustion.
If in that situation the affinity mask for a single vector is not created,
every caller has to handle the special case.
There is no reason why the mask cannot be created, so remove the check for
a single vector and create the mask.
Fixes: c66d4bd110 ("genirq/affinity: Add new callback for (re)calculating interrupt sets")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190805011906.5020-1-ming.lei@redhat.com
This reverts commit cc798c8389.
Tony writes:
Somehow this causes a regression in Linux next for me where I'm
seeing lots of sysfs entries now missing under
/sys/bus/platform/devices.
For example, I now only see one .serial entry show up in sysfs.
Things work again if I revert commit cc798c8389 ("kernfs: fix
memleak inkernel_ops_readdir()"). Any ideas why that would be?
Tejun says:
Ugh, you're right. It can get double-put cuz ctx->pos is put by
release too.
So reverting it for now.
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Fixes: cc798c8389 ("kernfs: fix memleak in kernel_ops_readdir()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building with W=1, warnings about missing prototypes are emitted:
CC arch/x86/lib/cpu.o
arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes]
5 | unsigned int x86_family(unsigned int sig)
| ^~~~~~~~~~
arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes]
18 | unsigned int x86_model(unsigned int sig)
| ^~~~~~~~~
arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes]
33 | unsigned int x86_stepping(unsigned int sig)
| ^~~~~~~~~~~~
Add the proper include file so the prototypes are there.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/42513.1565234837@turing-police
KBUILD_CFLAGS is very carefully built up in the top level Makefile,
particularly when cross compiling or using different build tools.
Resetting KBUILD_CFLAGS via := assignment is an antipattern.
The comment above the reset mentions that -pg is problematic. Other
Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when
CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of
the important KBUILD_CFLAGS then manually having to re-add them. Seems
also that __stack_chk_fail references are generated when using
CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG.
Fixes: 8fc5b4d412 ("purgatory: core purgatory functionality")
Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190807221539.94583-2-ndesaulniers@google.com
Implementing memcpy and memset in terms of __builtin_memcpy and
__builtin_memset is problematic.
GCC at -O2 will replace calls to the builtins with calls to memcpy and
memset (but will generate an inline implementation at -Os). Clang will
replace the builtins with these calls regardless of optimization level.
$ llvm-objdump -dr arch/x86/purgatory/string.o | tail
0000000000000339 memcpy:
339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax
000000000000033b: R_X86_64_64 memcpy
343: ff e0 jmpq *%rax
0000000000000345 memset:
345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax
0000000000000347: R_X86_64_64 memset
34f: ff e0
Such code results in infinite recursion at runtime. This is observed
when doing kexec.
Instead, reuse an implementation from arch/x86/boot/compressed/string.c.
This requires to implement a stub function for warn(). Also, Clang may
lower memcmp's that compare against 0 to bcmp's, so add a small definition,
too. See also: commit 5f074f3e19 ("lib/string.c: implement a basic bcmp")
Fixes: 8fc5b4d412 ("purgatory: core purgatory functionality")
Reported-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Debugged-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Debugged-by: Manoj Gupta <manojgupta@google.com>
Suggested-by: Alistair Delva <adelva@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vaibhav Rustagi <vaibhavrustagi@google.com>
Cc: stable@vger.kernel.org
Link: https://bugs.chromium.org/p/chromium/issues/detail?id=984056
Link: https://lkml.kernel.org/r/20190807221539.94583-1-ndesaulniers@google.com
In sound_insert_unit(), the controlling structure 's' is allocated through
kmalloc(). Then it is added to the sound driver list by invoking
__sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is
removed from the list through __sound_remove_unit(). If 'index' is not less
than 0, -EBUSY is returned to indicate the error. However, 's' is not
deallocated on this execution path, leading to a memory leak bug.
To fix the above issue, free 's' before -EBUSY is returned.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
drm-fixes-5.3-2019-08-07:
amdgpu:
- Fixes VCN to handle the latest navi10 firmware
- Fixes for fan control on navi10
- Properly handle SMU metrics table on navi10
- Fix a resume regression on Stoney
amdkfd:
- Revert new GWS ioctl. It's not ready.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807184221.3323-1-alexander.deucher@amd.com
This contains a single fix for a regression introduced by a combination
of a GPIO and a drm/tegra patch merged in v5.3-rc1.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl1K2ksTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zofXhEACmwhA83xBPcox3WdcSG6PJKRra0RPo
TVI4YfzU0nPowU9PdlQev0az9sGVx2cUXCRv06TEkvRwvYqCg38I7cQcrsv6/wQN
EvB1MqVq5U8hV31BSWw6ayynpg0xUfgf+rpD8usHqoL9ETMClypf9PruFf+PMAN2
uN5dGJ0sYPbrdktrTsmgcPTVHygpcgE4c4f0w87EnVCVlFuwHjFpUPtgYl84DW5M
u9AP3rVAHC35M0dB13qTJePAWn6xYMxAdppIX9DXzo5myJDnF39e+cXc2l8UeZKw
0KXXIy6utrSFBiyCaej53elFlSQojOiq0Keb0y/Y72MtVVY/FzcuwPGmMKySvjGl
dG+OADpTAWtDBFcEsIqX45HXeO+4XJQvGqsbYDvAPuJp8F8AXcRyRuSetq4dOyLe
ldNAy42IufxYtGxiOf3GdxwneSOtDMx1jXvsHkXtCE2yK7Is5cMNANaT365TUkAd
/6h+m0wTgvVjwHvIESeM5VDDJP+FNSCn/vtMyBjggtsTwmUUYh8LiTC97xBURZVX
pGJrcXW0eZIfqS3DhV2rAVIg1o0tdHQOlU4epSgoAE4uIMYHb6DwdW8ORe4SQ/Wj
KRZHikjsoQ5BdvUjidOsMiixW6HbKXFwjY+UEuMb7+pk/zBfGKErza/KPEwqd54M
XAduCoXrpUtp1g==
=AJVs
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.3-rc4' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.3-rc4
This contains a single fix for a regression introduced by a combination
of a GPIO and a drm/tegra patch merged in v5.3-rc1.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807140634.29166-1-thierry.reding@gmail.com
The configuration register of the tmp75b sensor is 16bit long, however
the first byte is reserved, so there is not no need to take care of it.
Because the order of the bytes is little endian and it is only necessary
to write one byte, the desired bits must be shifted into a 8 bit range.
Fixes: 39abe9d88b ("hwmon: (lm75) Add support for TMP75B")
Cc: stable@vger.kernel.org
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Link: https://lore.kernel.org/r/20190801075324.4638-1-iker.perez@codethink.co.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.
In detail:
- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
file under /sys and the "sensors" command displays in4_input.
But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.
Fix is_visible function to detect and report in4_input visibility
as expected.
Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: stable@vger.kernel.org
Fixes: 3434f37835 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit b2ce5617da ("media: i2c: fix warning same module names")
renamed the adv7511 module in the media tree to adv7511-v4l2.
This patch does the same rename for the driver name and device id to
keep the naming consistent.
Since the cobalt driver loads this module, it had to be renamed there
as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
arch/microblaze/ defines out_be32() and in_be32(), so don't do that
again in the driver source.
Fixes these build warnings:
../drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined
../arch/microblaze/include/asm/io.h:50: note: this is the location of the previous definition
../drivers/media/platform/fsl-viu.c:37: warning: "in_be32" redefined
../arch/microblaze/include/asm/io.h:53: note: this is the location of the previous definition
Fixes: 29d7506863 ("media: fsl-viu: allow building it with COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In imx7s.dtsi the node name for the CSI multiplexer is "csi-mux", not
"csi_mux", so fix all the references in the document.
This fixes the following error when the instructions are followed:
Unable to parse link: Invalid argument (22)
While at it, provide the "media-ctl -p" output from 5.2 kernel
version, so that users can see a more updated output.
Fixes: fa88fbdafb ("media: imx7.rst: add documentation for i.MX7 media driver")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Error h264 bitstreams which picture info are out range of
decoder hardware specification, and no nal start code at the
beginning of the buffer, stop decoding and exit.
Signed-off-by: Rui Wang <gtk_ruiwang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for V4L2_PIX_FMT_BGRA/X32 and V4L2_PIX_FMT_RGBA/X32 formats.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
If IOMMU_SUPPORT is not set, and COMPILE_TEST is y,
IOMMU_IOVA may be set to m. So building will fails:
drivers/staging/media/tegra-vde/iommu.o: In function `tegra_vde_iommu_map':
iommu.c:(.text+0x41): undefined reference to `alloc_iova'
iommu.c:(.text+0x56): undefined reference to `__free_iova'
Select IOMMU_IOVA while COMPILE_TEST is set to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: b301f8de19 ("media: staging: media: tegra-vde: Add IOMMU support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Abort processing of a command if we run out of mapped data in the
SG list. This should never happen, but a previous bug caused it to
be possible. Play it safe and attempt to abort nicely if we don't
have more SG segments left.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For passthrough requests, libata-scsi takes what the user passes in
as gospel. This can be problematic if the user fills in the CDB
incorrectly. One example of that is in request sizes. For read/write
commands, the CDB contains fields describing the transfer length of
the request. These should match with the SG_IO header fields, but
libata-scsi currently does no validation of that.
Check that the number of blocks in the CDB for passthrough requests
matches what was mapped into the request. If the CDB asks for more
data then the validated SG_IO header fields, error it.
Reported-by: Krishna Ram Prakash R <krp@gtux.in>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
0eb6ddfb86 tried to fix this up, but introduced a use-after-free
of dio. Additionally, we still had an issue with error handling,
as reported by Darrick:
"I noticed a regression in xfs/747 (an unreleased xfstest for the
xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down
to a simpler reproducer:
error-test: 0 209 linear 8:48 0
error-test: 209 1 error
error-test: 210 6446894 linear 8:48 210
Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO
for sector 209 and to pass the io to the scsi device everywhere else.
On 5.3-rc3, performing a directio pread of this range with a < 1M buffer
(in other words, a request for fewer than MAX_BIO_PAGES bytes) yields
EIO like you'd expect:
pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error)
pread: Input/output error
+++ exited with 0 +++
But doing it with a larger buffer succeeds(!):
pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880
read 1146880/1146880 bytes at offset 0
1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec)
+++ exited with 0 +++
(Note that the part of the buffer corresponding to the dm-error area is
uninitialized)
On 5.3-rc2, both commands would fail with EIO like you'd expect. The
only change between rc2 and rc3 is commit 0eb6ddfb86 ("block: Fix
__blkdev_direct_IO() for bio fragments").
AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets
split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB)
and a second one for the 96k after that."
Fix this by noting that it's always safe to dereference dio if we get
BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So
we can safely increment the dio size before calling submit_bio(), and
then decrement it on failure (not that it really matters, as the bio
and dio are going away).
For error handling, return to the original method of just using 'ret'
for tracking the error, and the size tracking in dio->size.
Fixes: 0eb6ddfb86 ("block: Fix __blkdev_direct_IO() for bio fragments")
Fixes: 6a43074e2f ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that the state recovery code handles ETIMEDOUT correctly,
and also that we set RPC_TASK_TIMEOUT when recovering open state.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This reverts commit 1a058c3376.
This interface is still in too much flux. Revert until
it's sorted out.
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: i386_defconfig i386):
arch/x86/kernel/cpu/mtrr/cyrix.c:99:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190805201712.GA19927@embeddedor
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: allnoconfig i386):
arch/x86/kernel/ptrace.c:202:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (unlikely(value == 0))
^
arch/x86/kernel/ptrace.c:206:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190805195654.GA17831@embeddedor
A long-time problem on the recent AMD chip (X370, X470, B450, etc with
PCI ID 1022:1457) with Realtek codecs is the crackled or distorted
sound for capture streams, as well as occasional playback hiccups.
After lengthy debugging sessions, the workarounds we've found are like
the following:
- Set up the proper driver caps for this controller, similar as the
other AMD controller.
- Correct the DMA position reporting with the fixed FIFO size, which
is similar like as workaround used for VIA chip set.
- Even after the position correction, PulseAudio still shows
mysterious stalls of playback streams when a capture is triggered in
timer-scheduled mode. Since we have no clear way to eliminate the
stall, pass the BATCH PCM flag for PA to suppress the tsched mode as
a temporary workaround.
This patch implements the workarounds. For the driver caps, it
defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO-
corrected position reporting (corresponding to the new position_fix=6)
and enforces the SNDRV_PCM_INFO_BATCH flag.
Note that the current implementation is merely a workaround.
Hopefully we'll find a better alternative in future, especially about
removing the BATCH flag hack again.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
