Make xdp samples consistent with iproute2 behavior and set the
XDP_FLAGS_UPDATE_IF_NOEXIST by default when setting the xdp program on
interface. Provide an option for user to force the program loading,
which as a result will not include the mentioned flag in
bpf_set_link_xdp_fd call.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It is common XDP practice to unload/deattach the XDP bpf program,
when the XDP sample program is Ctrl-C interrupted (SIGINT) or
killed (SIGTERM).
The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info,
forgot to trap signal SIGTERM (which is the default signal used
by the kill command).
This was discovered by Red Hat QA, which automated scripts depend
on killing the XDP sample program after a timeout period.
Fixes: fad3917e36 ("samples/bpf: add cpumap sample program xdp_redirect_cpu")
Fixes: 0fca931a6f ("samples/bpf: program demonstrating access to xdp_rxq_info")
Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
XDP_TX requires also changing the MAC-addrs, else some hardware
may drop the TX packet before reaching the wire. This was
observed with driver mlx5.
If xdp_rxq_info select --action XDP_TX the swapmac functionality
is activated. It is also possible to manually enable via cmdline
option --swapmac. This is practical if wanting to measure the
overhead of writing/updating payload for other action types.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is a cost associated with reading the packet data payload
that this test ignored. Add option --read to allow enabling
reading part of the payload.
This sample/tool helps us analyse an issue observed with a NIC
mlx5 (ConnectX-5 Ex) and an Intel(R) Xeon(R) CPU E5-1650 v4.
With no_touch of data:
Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:no_touch
XDP stats CPU pps issue-pps
XDP-RX CPU 0 14,465,157 0
XDP-RX CPU 1 14,464,728 0
XDP-RX CPU 2 14,465,283 0
XDP-RX CPU 3 14,465,282 0
XDP-RX CPU 4 14,464,159 0
XDP-RX CPU 5 14,465,379 0
XDP-RX CPU total 86,789,992
When not touching data, we observe that the CPUs have idle cycles.
When reading data the CPUs are 100% busy in softirq.
With reading data:
Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:read
XDP stats CPU pps issue-pps
XDP-RX CPU 0 9,620,639 0
XDP-RX CPU 1 9,489,843 0
XDP-RX CPU 2 9,407,854 0
XDP-RX CPU 3 9,422,289 0
XDP-RX CPU 4 9,321,959 0
XDP-RX CPU 5 9,395,242 0
XDP-RX CPU total 56,657,828
The effect seen above is a result of cache-misses occuring when
more RXQs are being used. Based on perf-event observations, our
conclusion is that the CPUs DDIO (Direct Data I/O) choose to
deliver packet into main memory, instead of L3-cache. We also
found, that this can be mitigated by either using less RXQs or by
reducing NICs the RX-ring size.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we can use full powers of libbpf in BPF samples, we
should perhaps make the simplest XDP programs not depend on
bpf_load helpers. This way newcomers will be exposed to the
recommended library from the start.
Use of bpf_prog_load_xattr() will also make it trivial to later
on request offload of the programs by simply adding ifindex to
the xattr.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use bpf_set_link_xdp_fd instead of set_link_xdp_fd to remove some
code duplication and benefit of netlink ext ack errors message.
Signed-off-by: Eric Leblond <eric@regit.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This sample program can be used for monitoring and reporting how many
packets per sec (pps) are received per NIC RX queue index and which
CPU processed the packet. In itself it is a useful tool for quickly
identifying RSS imbalance issues, see below.
The default XDP action is XDP_PASS in-order to provide a monitor
mode. For benchmarking purposes it is possible to specify other XDP
actions on the cmdline --action.
Output below shows an imbalance RSS case where most RXQ's deliver to
CPU-0 while CPU-2 only get packets from a single RXQ. Looking at
things from a CPU level the two CPUs are processing approx the same
amount, BUT looking at the rx_queue_index levels it is clear that
RXQ-2 receive much better service, than other RXQs which all share CPU-0.
Running XDP on dev:i40e1 (ifindex:3) action:XDP_PASS
XDP stats CPU pps issue-pps
XDP-RX CPU 0 900,473 0
XDP-RX CPU 2 906,921 0
XDP-RX CPU total 1,807,395
RXQ stats RXQ:CPU pps issue-pps
rx_queue_index 0:0 180,098 0
rx_queue_index 0:sum 180,098
rx_queue_index 1:0 180,098 0
rx_queue_index 1:sum 180,098
rx_queue_index 2:2 906,921 0
rx_queue_index 2:sum 906,921
rx_queue_index 3:0 180,098 0
rx_queue_index 3:sum 180,098
rx_queue_index 4:0 180,082 0
rx_queue_index 4:sum 180,082
rx_queue_index 5:0 180,093 0
rx_queue_index 5:sum 180,093
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
