Commit Graph

224 Commits

Author SHA1 Message Date
Namhyung Kim
89dceb22c0 perf trace: Use thread_{,_set}_priv helpers
This is mechanical changes only for accounting access to thread->priv
properly in the source level.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1412556363-26229-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-15 17:39:02 -03:00
Chang Hyun Park
2c82c3ad56 perf trace: Fix mmap return address truncation to 32-bit
Using 'perf trace' for mmap is truncating return values by stripping the
top 32 bits, actually printing only the lower 32 bits.

This was because the ret value was of an 'int' type and not a 'long'
type.

  The Problem:

  991258501.244 ( 0.004 ms): mmap(len: 40001536, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1) = 0x56691000
  991258501.257 ( 0.000 ms): minfault [_int_malloc+0x1038] => //anon@0x7fa056691008 //(d.)

The first line shows an mmap, which succeeds and returns 0x56691000.

However the next line shows a memory access to that virtual memory area,
specifically to 0x7fa056691008. The upper 32 bit is lost due to the
problem mentioned above, and thus mmap's return value didn't have the
upper 0x7fa0.

Tested on 3.17-rc5 from the linus's tree, and the HEAD of tip/master

Signed-off-by: Chang Hyun Park <heartinpiece@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1411736041-8017-1-git-send-email-heartinpiece@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-29 15:25:36 -03:00
Taeung Song
52e0283497 perf tools: Modify error code for when perf_session__new() fails
Because perf_session__new() can fail for more reasons than just ENOMEM,
modify error code(ENOMEM or EINVAL) to -1.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1411522417-9917-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-26 12:32:58 -03:00
Arnaldo Carvalho de Melo
46fb3c21d2 perf trace: Filter out POLLHUP'ed file descriptors
So that we don't continue polling on vanished file descriptors, i.e.
file descriptors for events monitoring threads that exited.

I.e. the following 'trace' command now exits as expected, instead
of staying in an eternal loop:

      $ sleep 5s &
      $ trace -p `pidof sleep`

Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6qegv786zbf6i8us6t4rxug9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-25 16:46:56 -03:00
Arnaldo Carvalho de Melo
f66a889dbc perf evlist: Introduce poll method for common code idiom
Since we have access two evlist members in all these poll calls, provide
a helper.

This will also help to make the patch introducing the pollfd class more
clear, as the evlist specific uses will be hiden away
perf_evlist__poll().

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-jr9d4aop4lvy9453qahbcgp0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-09-25 16:46:55 -03:00
Masami Hiramatsu
942a91ed3f perf trace: Use strerror_r instead of strerror
Use strerror_r instead of strerror in error message for thead-safety.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022241.3545.97543.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-15 13:06:28 -03:00
Namhyung Kim
0a7e6d1b68 perf tools: Check recorded kernel version when finding vmlinux
Currently vmlinux_path__init() only tries to find vmlinux file from
current directory, /boot and some canonical directories with version
number of the running kernel.  This can be a problem when reporting old
data recorded on a kernel version not running currently.

We can use --symfs option for this but it's annoying for user to do it
always.  As we already have the info in the perf.data file, it can be
changed to use it for the search automatically.

Before:

  $ perf report
  ...
  # Samples: 4K of event 'cpu-clock'
  # Event count (approx.): 1067250000
  #
  # Overhead  Command     Shared Object      Symbol
  # ........  ..........  .................  ..............................
      71.87%     swapper  [kernel.kallsyms]  [k] recover_probed_instruction

After:

  # Overhead  Command     Shared Object      Symbol
  # ........  ..........  .................  ....................
      71.87%     swapper  [kernel.kallsyms]  [k] native_safe_halt

This requires to change signature of symbol__init() to receive struct
perf_session_env *.

Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13 16:42:21 -03:00
Namhyung Kim
cb2ffae241 perf trace: Move call to symbol__init() after creating session
This is a preparation of fixing dso__load_kernel_sym().  It needs a
session info before calling symbol__init().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13 16:41:38 -03:00
Alex Snast
86998dda5d perf trace: Add beautifier for mremap flags param
~/devel/kernel/tools/perf(branch:master*) » sudo ./perf trace ~/mremap_test
     0.543 ( 0.003 ms): mprotect(start: 0x600000, len: 4096, prot: READ      ) = 0
     0.550 ( 0.003 ms): mprotect(start: 0x7f441260d000, len: 4096, prot: READ) = 0
     0.561 ( 0.010 ms): munmap(addr: 0x7f44125e2000, len: 165572             ) = 0
     0.595 ( 0.012 ms): mmap(len: 12288, prot: READ|WRITE, flags: SHARED|ANONYMOUS|LOCKED, fd: -1) = 0x12608000
     0.603 ( 0.006 ms): mremap(addr: 0x7f4412608000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da295000) = 0xda295000
     0.608 ( 0.003 ms): mremap(addr: 0x7f441260a000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da297000) = 0xda297000
     0.612 ( 0.003 ms): mremap(addr: 0x7f4412609000, old_len: 4096, new_len: 4096, flags: MAYMOVE|FIXED, new_addr: 0x7f16da296000) = 0xda296000
     0.619 ( 0.000 ms): exit_group(

Signed-off-by: Alex Snast <asnast@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407944560-26924-1-git-send-email-asnast@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-13 15:55:26 -03:00
Jiri Olsa
0a8cb85c20 perf tools: Rename ordered_samples bool to ordered_events
The time ordering is generic for all kinds of events, so using generic
name 'ordered_events' for ordered_samples bool in perf_tool struct.

No functional change was intended.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-07mrqzcuhsks9wfmxrzsvemz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 12:02:54 -03:00
Arnaldo Carvalho de Melo
0524798cc3 perf tools: Fix build on gcc 4.4.7
[acme@sandy linux]$ gcc --version
gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-3)
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[acme@sandy linux]$ make O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
  CC       /tmp/build/perf/builtin-trace.o
builtin-trace.c: In function ‘perf_evlist__add_pgfault’:
builtin-trace.c:1997: error: unknown field ‘sample_period’ specified in initializer
make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1
make: *** [install-bin] Error 2
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@sandy linux]$ make O=/tmp/build/perf -C tools/perf install-bin
make O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qt7h2g5fcf42qiw5hv7mgpjk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-23 18:15:09 -03:00
Arnaldo Carvalho de Melo
4414a3c510 perf trace: Fix build on 32-bit systems
CC       /tmp/build/perf/builtin-trace.o
  builtin-trace.c: In function 'print_location':
  builtin-trace.c:1792:4: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'u64' [-Werror=format]
  builtin-trace.c:1794:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format]
  builtin-trace.c:1796:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format]
  cc1: all warnings being treated as errors
  make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1
  make[1]: *** Waiting for unfinished jobs....
  make: *** [install-bin] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'

  acme@linux-goap:~/git/linux> uname -a
  Linux linux-goap 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-843p3aqbw531eqiu2hah8o9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08 15:39:21 -03:00
Stanislav Fomichev
a2ea67d7b5 perf trace: Add pagefault statistics
'perf trace' can show summary of events using -S option. This commit
also reports number of major/minor pagefault events in this summary.

$ perf trace -s --pf all -- sleep 1

 Summary of events:

 sleep (18604), 275 events, 99.6%, 197 minfaults, 0.000 msec

   syscall            calls      min       avg       max      stddev
                               (msec)    (msec)    (msec)        (%)
   --------------- -------- --------- --------- ---------     ------
   read                   2     0.000     0.001     0.002    100.00%
   open                   3     0.004     0.005     0.007     21.13%
   close                  3     0.001     0.001     0.001      1.37%
   fstat                  3     0.001     0.002     0.002     10.66%
   mmap                   8     0.002     0.004     0.006     10.69%
   mprotect               4     0.003     0.005     0.008     24.68%
   munmap                 1     0.005     0.005     0.005      0.00%
   brk                    3     0.001     0.002     0.003     28.08%
   access                 3     0.002     0.003     0.005     24.48%
   nanosleep              1  1000.747  1000.747  1000.747      0.00%
   execve                 8     0.000     0.033     0.246     91.00%
   arch_prctl             1     0.001     0.001     0.001      0.00%

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404842716-19190-1-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-07-08 15:34:40 -03:00
Stanislav Fomichev
e281a9606d perf trace: Add possibility to switch off syscall events
Currently, we may either trace syscalls or syscalls+pagefaults.

We'd like to be able to trace *only* pagefaults and this commit
implements this feature.

Example:

  [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace --no-syscalls -F -p `pidof xchat`
       0.000 ( 0.000 ms): xchat/4574 majfault [g_unichar_get_script+0x11] => /usr/lib64/libglib-2.0.so.0.3800.2@0xc403b (x.)
       0.202 ( 0.000 ms): xchat/4574 majfault [_cairo_hash_table_lookup+0x53] => 0x2280ff0 (?.)
      20.854 ( 0.000 ms): xchat/4574 majfault [gdk_cairo_set_source_pixbuf+0x110] => /usr/bin/xchat@0x6da1f (x.)
    1022.000 ( 0.000 ms): xchat/4574 majfault [__memcpy_sse2_unaligned+0x29] => 0x7ff5a8ca0400 (?.)
  ^C[root@zoo /]#

Below we can see malloc calls, 'trace' reading symbol tables in libraries to
resolve symbols, etc.

  [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace --no-syscalls -F all --cpu 1 sleep 10
       0.000 ( 0.000 ms): chrome/26589 minfault [0x1b53129] => /tmp/perf-26589.map@0x33cbcbf7f000 (x.)
      96.477 ( 0.000 ms): libvirtd/947 minfault [copy_user_enhanced_fast_string+0x5] => 0x7f7685bba000 (?k)
     113.164 ( 0.000 ms): Xorg/1063 minfault [0x786da] => 0x7fce52882a3c (?.)
    7162.801 ( 0.000 ms): chrome/3747 minfault [0x8e1a89] => 0xfcaefed0008 (?.)
<SNIP>
    7773.138 ( 0.000 ms): chrome/3886 minfault [0x8e1a89] => 0xfcb0ce28008 (?.)
    7992.022 ( 0.000 ms): chrome/26574 minfault [0x1b5a708] => 0x3de7b5fc5000 (?.)
    8108.949 ( 0.000 ms): qemu-system-x8/4537 majfault [_int_malloc+0xee] => 0x7faffc466d60 (?.)
    8108.975 ( 0.000 ms): qemu-system-x8/4537 minfault [_int_malloc+0x102] => 0x7faffc466d60 (?.)
<SNIP>
    8148.174 ( 0.000 ms): qemu-system-x8/4537 minfault [_int_malloc+0x102] => 0x7faffc4eb500 (?.)
    8270.855 ( 0.000 ms): chrome/26245 minfault [do_bo_emit_reloc+0xdb] => 0x45d092bc004 (?.)
    8270.869 ( 0.000 ms): chrome/26245 minfault [do_bo_emit_reloc+0x108] => 0x45d09150000 (?.)
no symbols found in /usr/lib64/libspice-server.so.1.9.0, maybe install a debug package?
    8273.831 ( 0.000 ms): trace/20198 majfault [__memcmp_sse4_1+0xbc6] => /usr/lib64/libspice-server.so.1.9.0@0xdf000 (d.)
<SNIP>
    8275.121 ( 0.000 ms): trace/20198 minfault [dso__load+0x38] => 0x14fe756 (?.)
no symbols found in /usr/lib64/libelf-0.158.so, maybe install a debug package?
    8275.142 ( 0.000 ms): trace/20198 minfault [__memcmp_sse4_1+0xbc6] => /usr/lib64/libelf-0.158.so@0x0 (d.)
<SNIP>
  [root@zoo /]#

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-6-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26 17:48:07 -03:00
Stanislav Fomichev
1e28fe0a4f perf trace: Add pagefaults record and replay support
Previous commit added live pagefault trace support, this one adds record
and replay support.

Example:

  [root@zoo /]# echo 1 > /proc/sys/vm/drop_caches ; trace -F all record -a sleep 10
  [ perf record: Woken up 0 times to write data ]
  [ perf record: Captured and wrote 1029.722 MB perf.data (~44989242 samples) ]

  [root@zoo /]# ls -la perf.data
  -rw-------. 1 root root 1083921722 Jun 26 17:44 perf.data

  [root@zoo /]# perf evlist
  raw_syscalls:sys_enter
  raw_syscalls:sys_exit
  major-faults
  minor-faults

  [root@zoo /]# trace -i perf.data | grep -v trace\/ | tail -15
     156.137 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.)
     156.139 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.)
     156.140 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0xc4] => 0x0 (?.)
     156.144 ( 0.000 ms): perl/18476 minfault [_int_free+0xda] => 0x0 (?.)
     156.151 ( 0.000 ms): perl/18476 minfault [_int_free+0x1df] => 0x0 (?.)
     156.158 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.)
     156.161 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.)
     156.168 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.)
     156.172 ( 0.000 ms): perl/18476 minfault [0xb4243] => 0x0 (?.)
     156.173 ( 0.000 ms): perl/18476 minfault [_int_free+0xda] => 0x0 (?.)
     156.183 ( 0.000 ms): perl/18476 minfault [Perl_hfree_next_entry+0xb4] => 0x0 (?.)
     156.197 ( 0.000 ms): perl/18476 minfault [_int_free+0x1df] => 0x0 (?.)
     156.216 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.)
     156.221 ( 0.000 ms): perl/18476 minfault [Perl_sv_clear+0x123] => 0x0 (?.)
  [root@zoo /]#

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-4-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26 17:43:24 -03:00
Stanislav Fomichev
598d02c5a0 perf trace: Add support for pagefault tracing
This patch adds optional pagefault tracing support to 'perf trace'.

Using -F/--pf option user can specify whether he wants minor, major or
all pagefault events to be traced. This patch adds only live mode,
record and replace will come in a separate patch.

Example output:

  1756272.905 ( 0.000 ms): curl/5937 majfault [0x7fa7261978b6] => /usr/lib/x86_64-linux-gnu/libkrb5.so.26.0.0@0x85288 (d.)
  1862866.036 ( 0.000 ms): wget/8460 majfault [__clear_user+0x3f] => 0x659cb4 (?k)

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26 16:07:43 -03:00
Stanislav Fomichev
0c82adcf14 perf trace: Add perf_event parameter to tracepoint_handler
It will be used by next pagefault tracing patches in the series.

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-26 16:00:45 -03:00
Arnaldo Carvalho de Melo
5089f20ee7 perf trace: Cache the is_exit syscall test
No need to use two strcmp calls per syscall entry, do it just once, when
reading the per syscall info.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lymtxhz0mg3adyt5e2pssn8f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19 16:13:13 -03:00
Arnaldo Carvalho de Melo
774135344f perf trace: Remove needless reassignments
The thread->priv value is already obtained a few lines earlier from the
thread__trace() call. Leftovers from before thread__trace().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-96laa634vzfwlwxurevo40wp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19 16:13:12 -03:00
Arnaldo Carvalho de Melo
cdcd1e6bd8 perf trace: Fix up fd -> pathname resolution
There was a brown paper bag bug in the patch that introduced a reference
implementation on using 'perf probe' made wannabe tracepoints that broke fd ->
pathname resolution, fix it:

  [root@zoo ~]# perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string'
  Added new event:
    probe:vfs_getname    (on getname_flags:65 with pathname=result->name:string)

  You can now use it in all perf tools, such as:

	perf record -e probe:vfs_getname -aR sleep 1

  [root@zoo ~]

Before:

  [acme@zoo linux]$ trace touch -e open,fstat /tmp/b
     1.159 ( 0.007 ms): open(filename: 0x7fd73f2fe088, flags: CLOEXEC                         ) = 3
     1.163 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e610                                  ) = 0
     1.192 ( 0.009 ms): open(filename: 0x7fd73f4fedb8, flags: CLOEXEC                         ) = 3
     1.201 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e660                                  ) = 0
     1.501 ( 0.013 ms): open(filename: 0x7fd73f0a1610, flags: CLOEXEC                         ) = 3
     1.505 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fd73f2ddb60                                  ) = 0
     1.581 ( 0.011 ms): open(filename: 0x7fff1b2603da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
  [acme@zoo linux]$

After:

  [acme@zoo linux]$ trace touch -e open,fstat,dup2,mmap,close /tmp/b
     1.105 ( 0.004 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fbf000
     1.136 ( 0.008 ms): open(filename: 0x7f8902dbc088, flags: CLOEXEC                         ) = 3
     1.140 ( 0.002 ms): fstat(fd: 3</etc/ld.so.cache>, statbuf: 0x7fff19889ef0                ) = 0
     1.146 ( 0.004 ms): mmap(len: 86079, prot: READ, flags: PRIVATE, fd: 3</etc/ld.so.cache>  ) = 0x2fa9000
     1.149 ( 0.001 ms): close(fd: 3</etc/ld.so.cache>                                         ) = 0
     1.170 ( 0.010 ms): open(filename: 0x7f8902fbcdb8, flags: CLOEXEC                         ) = 3
     1.178 ( 0.002 ms): fstat(fd: 3</lib64/libc.so.6>, statbuf: 0x7fff19889f40                ) = 0
     1.188 ( 0.006 ms): mmap(len: 3924576, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3</lib64/libc.so.6>) = 0x29e2000
     1.207 ( 0.007 ms): mmap(addr: 0x7f8902d96000, len: 24576, prot: READ|WRITE, flags: PRIVATE|DENYWRITE|FIXED, fd: 3</lib64/libc.so.6>, off: 1785856) = 0x2d96000
     1.217 ( 0.004 ms): mmap(addr: 0x7f8902d9c000, len: 16992, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS|FIXED, fd: -1) = 0x2d9c000
     1.228 ( 0.002 ms): close(fd: 3</lib64/libc.so.6>                                         ) = 0
     1.243 ( 0.003 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fa8000
     1.250 ( 0.003 ms): mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fa6000
     1.452 ( 0.010 ms): open(filename: 0x7f8902b5f610, flags: CLOEXEC                         ) = 3
     1.455 ( 0.002 ms): fstat(fd: 3</usr/lib/locale/locale-archive>, statbuf: 0x7f8902d9bb60  ) = 0
     1.461 ( 0.004 ms): mmap(len: 106070960, prot: READ, flags: PRIVATE, fd: 3</usr/lib/locale/locale-archive>) = 0xfc4b9000
     1.469 ( 0.002 ms): close(fd: 3</usr/lib/locale/locale-archive>                           ) = 0
     1.528 ( 0.010 ms): open(filename: 0x7fff1988c3da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
     1.532 ( 0.002 ms): dup2(oldfd: 3</tmp/b>                                                 ) = 0
     1.535 ( 0.001 ms): close(fd: 3</tmp/b>                                                   ) = 0
     1.544 ( 0.001 ms): close(                                                                ) = 0
     1.555 ( 0.001 ms): close(fd: 1                                                           ) = 0
     1.558 ( 0.001 ms): close(fd: 2                                                           ) = 0
  [acme@zoo linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vcm22xpjxc3j4hbyuzjzf7ik@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-06-19 16:13:11 -03:00
Ben Hutchings
02c5bb4a35 perf trace: Decode architecture-specific signal numbers
SIGSTKFLT is not defined on alpha, mips or sparc.

SIGEMT and SIGSWI are defined on some architectures and should be
decoded here if so.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 8bad5b0abf ('perf trace: Beautify signal number arg in several syscalls')
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648441.3003.101.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-10 11:10:45 -03:00
Arnaldo Carvalho de Melo
844ae5b46c perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
Supporting decoding the ioctl 'request' parameter needs more work to
properly support more architectures, the current approach doesn't work
on at least powerpc and sparc, as reported by Ben Hutchings in
http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk .

Work around that by making it to be ifdefed for the architectures known
to work with the current, limited approach, i386 and x86_64 till better
code is written.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@vger.kernel.org> # 3.13 Fixes: 78645cf3ed ("perf trace: Initial beautifier for ioctl's 'cmd' arg")
Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-13 17:28:31 -03:00
Ben Hutchings
79d26a6a19 perf trace: Add fallback definition of EFD_SEMAPHORE
glibc 2.17 is missing this on sparc, despite the fact that it's not
architecture-specific.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 49af9e93ad ('perf trace: Beautify eventfd2 'flags' arg')
Cc: <stable@vger.kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10 11:34:31 -03:00
Arnaldo Carvalho de Melo
509051ea84 perf record: Rename --no-delay to --no-buffering
That is how the option summary describes it and so that we can free
--delay to replace --initial-delay and then be consistent with stat's
--delay equivalent option.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-14 17:57:04 -03:00
Arnaldo Carvalho de Melo
98eafce6bd perf trace: Pack 'struct trace'
Initial struct stats:

	/* size: 368, cachelines: 6, members: 24 */
	/* sum members: 353, holes: 3, sum holes: 15 */
	/* last cacheline: 48 bytes */

After reorg:

[acme@ssdandy linux]$ pahole -C trace ~/bin/trace | tail -4
	/* size: 360, cachelines: 6, members: 24 */
	/* padding: 7 */
	/* last cacheline: 40 bytes */
};
[acme@ssdandy linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6jimc80yu89qkx6zb8465s6t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13 10:06:23 -03:00
Arnaldo Carvalho de Melo
983874d173 perf evlist: Auto unmap on destructor
Removing further boilerplate after making sure perf_evlist__munmap can
be called multiple times for the same evlist.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o0luenuld4abupm4nmrgzm6f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13 10:06:22 -03:00
Arnaldo Carvalho de Melo
f26e1c7cb2 perf evlist: Close fds on destructor
Since it is safe to call perf_evlist__close() multiple times, autoclose
it and remove the calls to the close from existing tools, reducing the
tooling boilerplate.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2kq9v7p1rude1tqxa0aue2tk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13 10:06:22 -03:00
Arnaldo Carvalho de Melo
03ad9747c5 perf evlist: Move destruction of maps to evlist destructor
Instead of requiring tools to do an extra destructor call just before
calling perf_evlist__delete.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0jd2ptzyikxb5wp7inzz2ah2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13 10:06:21 -03:00
Arnaldo Carvalho de Melo
735f7e0bbe perf evlist: Move the SIGUSR1 error reporting logic to prepare_workload
So that we have the boilerplate in the preparation method, instead of
open coded in tools wanting the reporting when the exec fails.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-purbdzcphdveskh7wwmnm4t7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-13 10:06:21 -03:00
Arnaldo Carvalho de Melo
046625231a perf tools: Introduce zfree
For the frequent idiom of:

   free(ptr);
   ptr = NULL;

Make it expect a pointer to the pointer being freed, so that it becomes
clear at first sight that the variable being freed is being modified.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-27 15:17:00 -03:00
Arnaldo Carvalho de Melo
b40067964f perf tools: Rename 'perf_record_opts' to 'record_opts
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.

This actually was discussed in the "Link:" referenced message below.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-19 14:43:45 -03:00
David Ahern
3160565f0e perf trace: Fix summary percentage when processing files
Getting a divide by 0 when events are processed from a file:

   perf trace -i perf.data -s
   ...
   dnsmasq (1684), 10 events, inf%, 0.000 msec

The problem is that the event count is not incremented as events are
processed. With this patch:

   perf trace -i perf.data -s
   ...
   dnsmasq (1684), 10 events, 8.9%, 0.000 msec

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-05 10:09:58 -03:00
David Ahern
9aca7f1792 perf trace: Add support for syscalls vs raw_syscalls
Older kernels (e.g., RHEL6) do system call tracing via
syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to
detect lack of raw_syscalls support and try syscalls.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-05 10:05:45 -03:00
Jiri Olsa
97978b3e30 perf tools: Add trace-event global object for tracepoint interface
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.

Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.

This function uses properly initialized global trace-event object,
ensuring proper plugins processing.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-04 15:21:25 -03:00
Jiri Olsa
f885037ef6 perf trace: Honour -m option
Currently trace command supports '-m' option, but does not honours its
value and keeps the default.

Changing the perf_evlist__mmap function call to use the '-m' configured
value.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385657842-8914-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-02 16:29:40 -03:00
Pekka Enberg
15e65c693d perf trace: Remove thread summary coloring
Thread summary line coloring looks ugly.  It doesn't add much value so
remove coloring completely.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1384447410-1771-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-27 14:58:34 -03:00
Pekka Enberg
27a778b512 perf trace: Tweak summary output
Tweak the summary output as suggested by Ingo Molnar:

  [penberg@localhost ~]$ perf trace -a --duration 10000 --summary -- sleep 1
  ^C
   Summary of events:

   Xorg (817), 148 events, 0.0%, 0.000 msec

     syscall            calls      min       avg       max      stddev
                                 (msec)    (msec)    (msec)        (%)
     --------------- -------- --------- --------- ---------     ------
     read                   7     0.002     0.004     0.011     32.00%
     rt_sigprocmask        40     0.001     0.001     0.002      1.31%
     ioctl                  6     0.002     0.003     0.005     19.45%
     writev                 7     0.004     0.018     0.059     43.76%
     select                 9     0.000    74.513   507.869     74.61%
     setitimer              4     0.001     0.002     0.002     10.08%

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384345308-24404-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-14 15:59:20 -03:00
Arnaldo Carvalho de Melo
602ad878d4 perf target: Shorten perf_target__ to target__
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.

Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:51:03 -03:00
David Ahern
fd2eabaf16 perf trace: Add summary only option
Per request from Pekka make --summary a summary only option meaning do
not show the individual system calls. Add another option to see all
syscalls along with the summary. In addition use 's' and 'S' as
shortcuts for the options.

Requested-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Pekka Enberg <penberg@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1384273875-3751-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 16:24:38 -03:00
Pekka Enberg
99ff715054 perf trace: Simplify '--summary' output
The output of 'perf trace --summary' tries to be too cute with
formatting and makes it very hard to read.  Simplify it in the spirit of
"strace -c":

[penberg@localhost libtrading]$ perf trace -a --duration 10000 --summary -- sleep 1
^C
 Summary of events:

 dbus-daemon (555), 10 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   sendmsg                2    0.002    0.005    0.008  55.00
   recvmsg                2    0.002    0.003    0.005  44.00
   epoll_wait             1    0.000    0.000    0.000   0.00

 NetworkManager (667), 56 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   poll                   2    0.000    0.002    0.003 100.00
   sendmsg               10    0.004    0.007    0.016  15.41
   recvmsg               16    0.002    0.003    0.005   8.24

 zfs-fuse (669), 4 events, 0.0%, 0.000 msec

                                                    msec/call
   syscall            calls      min      avg      max stddev
   --------------- -------- -------- -------- -------- ------
   futex                  2    0.000    0.001    0.002 100.00

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384267334-18953-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:38 -03:00
Pekka Enberg
7f7a4138c6 perf trace: Change syscall summary duration order
Switch duration order to minimum, average, maximum for the '--summary'
command line option because it's more natural to read.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/1384265410-12344-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:38 -03:00
Namhyung Kim
003824e8c2 perf trace: Fix segfault on perf trace -i perf.data
When replaying a previous record session, it'll get a segfault since it
doesn't initialize raw_syscalls enter/exit tracepoint's evsel->priv for
caching the format fields.

So fix it by properly initializing sys_enter/exit evsels that comes from
reading the perf.data file header.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-2-git-send-email-namhyung@kernel.org
[ Split the syscall tp field caching part in the previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:37 -03:00
Namhyung Kim
96695d4402 perf trace: Separate tp syscall field caching into init routine to be reused
We need to set this in evsels coming out of a perf.data file header, not
just for new ones created for live sessions.

So separate the code that caches the syscall entry/exit tracepoint
format fields into a new function that will be used in the next
changeset.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112115700.GC4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:36 -03:00
Namhyung Kim
73faab3a42 perf trace: Beautify fifth argument of mmap() as fd
The fifth argument of mmap syscall is fd and it often contains -1 as a
value for anon mappings.  Without this patch it doesn't show the file
name as well as it shows -1 as 4294967295.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384237500-22991-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-12 13:00:23 -03:00
Arnaldo Carvalho de Melo
a33fbd56ec perf machine: Simplify synthesize_threads method
Several tools (top, kvm) don't need to be called back to process each of
the syntheiszed records, instead relying on the machine__process_event
function to change the per machine data structures that represent
threads and mmaps, so provide a way to ask for this common idiom.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pusqibp8n3c4ynegd1frn4zd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11 15:56:40 -03:00
Arnaldo Carvalho de Melo
58d925dced perf machine: Introduce synthesize_threads method out of open coded equivalent
Further simplifications to be done on following patch, as most tools
don't use the callback, using instead just the canned
machine__process_event one.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r1m0vuuj3cat4bampno9yc8d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11 15:56:39 -03:00
Arnaldo Carvalho de Melo
62605dc50c perf record: Synthesize non-exec MMAP records when --data used
When perf_event_attr.mmap_data is set the kernel will generate
PERF_RECORD_MMAP events when non-exec (data, SysV mem) mmaps are
created, so we need to synthesize from /proc/pid/maps for existing
threads, as we do for exec mmaps.

Right now just 'perf record' does it, but any other tool that uses
perf_event__synthesize_thread(s|map) can request it.

Reported-by: Don Zickus <dzickus@redhat.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ihwzraikx23ian9txinogvv2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11 15:56:39 -03:00
Arnaldo Carvalho de Melo
ef503831d8 perf evsel: Remove idx parm from constructor
Most uses of the evsel constructor are followed by a call to
perf_evlist__add with an idex of evlist->nr_entries, so make rename
the current constructor to perf_evsel__new_idx and remove the need
for passing the constructor for the common case.

We still need the new_idx variant because the way groups are handled,
with evsel->nr_members holding the number of entries in an evlist,
partitioning the evlist into sublists inside a single linked list.

This asks for a clarifying refactoring, but for now simplify the non
parser cases, so that tool writers don't have to bother with evsel idx
setting.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zy9tskx6jqm2rmw7468zze2a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-11 15:56:39 -03:00
Arnaldo Carvalho de Melo
77170988ff perf trace: Don't relookup fields by name in each sample
Instead do the lookups just when creating the tracepoints, initially for
the most common, raw_syscalls:sys_{enter,exit}.

It works by having evsel->priv have a per tracepoint structure with
entries for the fields, for direct access, with the offset and a
function to get the value from the sample, doing the swap if needed.

Using a simple workload that does M millions write syscalls, we go from:

 # perf stat -i -e cycles /tmp/oldperf trace ./sc_hello 100 > /dev/null

 Performance counter stats for '/tmp/oldperf trace ./sc_hello 100':

     8,366,771,459 cycles

       2.668025928 seconds time elapsed

 # perf stat -i -e cycles perf trace ./sc_hello 100 > /dev/null

 Performance counter stats for 'perf trace ./sc_hello 100':

     8,345,187,650 cycles

       2.631748425 seconds time elapsed

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-eyfhvoo510a5i10b27dnvm88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-07 10:40:47 -03:00
Arnaldo Carvalho de Melo
744a971940 perf evsel: Ditch evsel->handler.data field
Not needed since this cset:

  fcf65bf149: perf evsel: Cache associated event_format

So lets trim this struct a bit.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j8setslokt0goiwxq9dogzqm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-07 10:40:47 -03:00