The disassembler for debug dumps was missing some newer host1x opcodes.
Add disassembly support for these.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x driver prints out "disassembly" dumps of the command FIFO
and gather contents on submission timeouts. However, the output has
been quite difficult to read with unnecessary newlines and occasional
missing parentheses.
Fix these problems by using pr_cont to remove unnecessary newlines
and by fixing other small issues.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The gather filter is a feature present on Tegra124 and newer where the
hardware prevents GATHERed command buffers from executing commands
normally reserved for the CDMA pushbuffer which is maintained by the
kernel driver.
This commit enables the gather filter on all supporting hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since Tegra186 the Host1x hardware allows syncpoints to be assigned to
specific channels, preventing any other channels from incrementing
them.
Enable this feature where available and assign syncpoints to channels
when submitting a job. Syncpoints are currently never unassigned from
channels since that would require extra work and is unnecessary with
the current channel allocation model.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
of_dma_configure() now checks the device's bus before configuring it, so
we need to set the device's bus before calling.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the implementation of Host1x present on the Tegra186.
The register space has been shuffled around a little bit, requiring
addition of some chip-specific code sections. Tegra186 also adds
several new features, most importantly the hypervisor, but those are
not yet supported with this commit.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
going to break the assumption that host1x will always be the parent for
devices requesting a syncpoint. It's also a more natural choice because
host1x clients are really the only ones that will know how to deal with
syncpoints.
Note that host1x clients are always guaranteed to be children of host1x,
regardless of their location in the device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Avoid some boilerplate by calling of_device_get_match_data() instead of
open-coding the equivalent in the driver.
While at it, shuffle around some code to avoid unnecessary local
variables.
Signed-off-by: Thierry Reding <treding@nvidia.com>
We do not want the common dma_configure() pathway to apply
indiscriminately to all devices, since there are plenty of buses which
do not have DMA capability, and if their child devices were used for
DMA API calls it would only be indicative of a driver bug. However,
there are a number of buses for which DMA is implicitly expected even
when not described by firmware - those we whitelist with an automatic
opt-in to dma_configure(), assuming that the DMA address space and the
physical address space are equivalent if not otherwise specified.
Commit 7232888366 ("of: restrict DMA configuration") introduced a
short-term fix by comparing explicit bus types, but this approach is far
from pretty, doesn't scale well, and fails to cope at all with bus
drivers which may be built as modules, like host1x. Let's refine things
by making that opt-in a property of the bus type, which neatly addresses
those problems and lets the decision of whether firmware description of
DMA capability should be optional or mandatory stay internal to the bus
drivers themselves.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that the cached node optimisation can apply to all allocations, the
couple of users which were playing tricks with dma_32bit_pfn in order to
benefit from it can stop doing so. Conversely, there is also no need for
all the other users to explicitly calculate a 'real' 32-bit PFN, when
init_iova_domain() can happily do that itself from the page granularity.
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Jonathan Hunter <jonathanh@nvidia.com>
CC: David Airlie <airlied@linux.ie>
CC: Sudeep Dutt <sudeep.dutt@intel.com>
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
[rm: use iova_shift(), rewrote commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
-----BEGIN PGP SIGNATURE-----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=ZaxL
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: Prevent BOs from being freed during job submission
drm/tegra: gem: Implement mmap() for PRIME buffers
drm/tegra: Support render node
drm/tegra: sor: Trace register accesses
drm/tegra: dpaux: Trace register accesses
drm/tegra: dsi: Trace register accesses
drm/tegra: hdmi: Trace register accesses
drm/tegra: dc: Trace register accesses
drm/tegra: sor: Use unsigned int for register offsets
drm/tegra: hdmi: Use unsigned int for register offsets
drm/tegra: dsi: Use unsigned int for register offsets
drm/tegra: dpaux: Use unsigned int for register offsets
drm/tegra: dc: Use unsigned int for register offsets
drm/tegra: Fix NULL deref in debugfs/iova
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
drm/tegra: Set MODULE_FIRMWARE for the VIC
drm/tegra: Add CONFIG_OF dependency
gpu: host1x: Support sub-devices recursively
gpu: host1x: fix error return code in host1x_probe()
gpu: host1x: Fix bitshift/mask multipliers
...
The display architecture in Tegra186 changes slightly compared to
earlier Tegra generations, which requires that we recursively scan
host1x sub-devices from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
platform_get_irq() returns an error code, but the host1x driver
ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some parts of Host1x uses BIT_WORD/BIT_MASK/BITS_PER_LONG to calculate
register or field offsets. This worked fine on ARMv7, but now that
BITS_PER_LONG is 64 but our registers are still 32-bit things are
broken.
Fix by replacing..
- BIT_WORD with (x / 32)
- BIT_MASK with BIT(x % 32)
- BITS_PER_LONG with 32
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pinning a Host1x BO currently cannot fail and zero is a valid address
for a BO when IOMMU is enabled. To avoid false errors remove checks
for NULL BO physical addresses.
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZkNpUAAoJEHm+PkMAQRiGr68H/2nr8kxpoUhZ7eA5C71waCjh
gnJSevkzJAp+fCb0KfQFAp1qvpmLLle4e6tAxYgTQZg4Z3W5cJJNfxu9TzY5sGuL
o9QUr43XzABepW4e4jhRtZv6dj3K6XruNeDQKXDZTDcc/S8zoiS/Pltq7VgPcAuM
kX+3qsNdUyknngD6b0z9NtJkb0mHKY6J8MpraWRO34egDwsaN/tuhRj0DRQpCoyQ
x/k+hMbc9MB9Dn8cfACo6Omb+r5Rfd7dTBUAju/TnIIgs//9voHba307N7XvLJZg
kWc8MqMQQZXfRZHB0atpDMHyZS/XQRlNPXj76j0+Ud/byODKTFkkazmgTpALvj8=
=CxeU
-----END PGP SIGNATURE-----
Backmerge tag 'v4.13-rc5' into drm-next
Linux 4.13-rc5
There's a really nasty nouveau collision, hopefully someone can take a look
once I pushed this out.
When there is no device to attach to the IOMMU domain, as may be the
case when the device-tree does not contain the proper iommu node, it is
best to keep going without IOMMU support rather than failing.
This allows the driver to probe and function instead of taking down
all of the tegra drm driver, leading to missing display support.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193305.5987-1-contact@paulk.fr
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZUGOmAAoJEHm+PkMAQRiGhX8H/3fIhingPD01MBf98U0xGrJo
yIXmhu6nFs7TM0lDVDcHsKgqLQIT69ll7PrSZrMkc1RGUIPINoCuJVuJqDre0kfB
of5TX2KegqSx8h1vOWjGBCBjdYfPGyMdf9icf6KsGc/SlIdhN6WA99kglAjJA0Ve
qPTNagF0ntUNg1lsXffxyfcHqFpyqw/Z/C4ie/byFsn9iJ1VG9mNlTWSud09vhuM
3tvHzTUVAIWWuRrrgrvgqQpnwL+q5BfSDsXScMjBau0EK3RGGqG8EN6Kbkfa7VQ6
aBoeboQjUijSJnVwvySdQ11MChTIOwZdfrNPra/1HD3WJNsSu4BIRt5JcAKcOhc=
=qmSg
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc7' into drm-next
Linux 4.12-rc7
Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
This starts off with the addition of more documentation for the host1x
and DRM drivers and finishes with a slew of fixes and enhancements for
the staging IOCTLs as a result of the awesome work done by Dmitry and
Erik on the grate reverse-engineering effort.
-----BEGIN PGP SIGNATURE-----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=zz/Z
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.13-rc1
This starts off with the addition of more documentation for the host1x
and DRM drivers and finishes with a slew of fixes and enhancements for
the staging IOCTLs as a result of the awesome work done by Dmitry and
Erik on the grate reverse-engineering effort.
* tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: At first try a non-blocking allocation for the gather copy
gpu: host1x: Refactor channel allocation code
gpu: host1x: Remove unused host1x_cdma_stop() definition
gpu: host1x: Remove unused 'struct host1x_cmdbuf'
gpu: host1x: Check waits in the firewall
gpu: host1x: Correct swapped arguments in the is_addr_reg() definition
gpu: host1x: Forbid unrelated SETCLASS opcode in the firewall
gpu: host1x: Forbid RESTART opcode in the firewall
gpu: host1x: Forbid relocation address shifting in the firewall
gpu: host1x: Do not leak BO's phys address to userspace
gpu: host1x: Correct host1x_job_pin() error handling
gpu: host1x: Initialize firewall class to the job's one
drm/tegra: dc: Disable plane if it is invisible
drm/tegra: dc: Apply clipping to the plane
drm/tegra: dc: Avoid reset asserts on Tegra20
drm/tegra: Check syncpoint ID in the 'submit' IOCTL
drm/tegra: Correct copying of waitchecks and disable them in the 'submit' IOCTL
drm/tegra: Check for malformed offsets and sizes in the 'submit' IOCTL
drm/tegra: Add driver documentation
gpu: host1x: Flesh out kerneldoc
The blocking gather copy allocation is a major performance downside of the
Host1x firewall, it may take hundreds milliseconds which is unacceptable
for the real-time graphics operations. Let's try a non-blocking allocation
first as a least invasive solution, it makes opentegra (Xorg driver)
performance indistinguishable with/without the firewall.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is largely a rewrite of the Host1x channel allocation code, bringing
several changes:
- The previous code could deadlock due to an interaction
between the 'reflock' mutex and CDMA timeout handling.
This gets rid of the mutex.
- Support for more than 32 channels, required for Tegra186
- General refactoring, including better encapsulation
of channel ownership handling into channel.c
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no host1x_cdma_stop() in the code, let's remove its definition
from the header file.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The struct host1x_cmdbuf is unused, let's remove it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Check waits in the firewall in a way it is done for relocations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Several channels could be made to write the same unit concurrently via
the SETCLASS opcode, trusting userspace is a bad idea. It should be
possible to drop the per-client channel reservation and add a per-unit
locking by inserting MLOCK's to the command stream to re-allow the
SETCLASS opcode, but it will be much more work. Let's forbid the
unit-unrelated class changes for now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RESTART opcode terminates the gather and restarts the CDMA fetching
from a specified word << 2 relative to the CDMA start address. That
shouldn't be allowed to be done by userspace.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Incorrectly shifted relocation address will cause a lower memory
corruption and likely a hang on a write or a read of an arbitrary data
in case of IOMMU absence. As of now, there is no known use for the
address shifting and adding a proper shifts / sizes validation is a much
more work. Let's forbid shifts in the firewall till a proper validation
is implemented.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Perform gathers coping before patching them, so that original gathers are
left untouched. That's not as bad as leaking kernel addresses, but still
doesn't feel right.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In case of relocations / waitchecks patching failure the jobs pins stay
referenced till DRM file get closed, wasting memory. Add the missed
unpinning.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The commands stream is prepended by the jobs class on the CDMA
submission, so that explicitly setting a module class in the commands
stream isn't necessary. The firewall initializes its class to 0 and the
command stream that doesn't explicitly specify the class effectively
bypasses the firewall.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The waitchecks along with multiple syncpoints per submit are not ready
for use yet, let's forbid them for now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If 'devm_reset_control_get' returns an error, then we erroneously return
success because error code is taken from 'host->clk' instead of
'host->rst'.
Fixes: b386c6b73a ("gpu: host1x: Support module reset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410202922.17665-1-christophe.jaillet@wanadoo.fr
Improve kerneldoc for the public parts of the host1x infrastructure in
preparation for adding driver-specific part to the GPU documentation.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When IOMMU_IOVA is not built-in but host1x is, we get a link error:
drivers/gpu/host1x/dev.o: In function `host1x_remove':
dev.c:(.text.host1x_remove+0x50): undefined reference to `put_iova_domain'
drivers/gpu/host1x/dev.o: In function `host1x_probe':
dev.c:(.text.host1x_probe+0x31c): undefined reference to `init_iova_domain'
dev.c:(.text.host1x_probe+0x38c): undefined reference to `put_iova_domain'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_init':
cdma.c:(.text.host1x_cdma_init+0x238): undefined reference to `alloc_iova'
cdma.c:(.text.host1x_cdma_init+0x2c0): undefined reference to `__free_iova'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_deinit':
cdma.c:(.text.host1x_cdma_deinit+0xb0): undefined reference to `free_iova'
This adds the same select statement that we have for drm_tegra.
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419182449.885312-1-arnd@arndb.de
When IOMMU_IOVA is not built-in but host1x is, we get a link error:
drivers/gpu/host1x/dev.o: In function `host1x_remove':
dev.c:(.text.host1x_remove+0x50): undefined reference to `put_iova_domain'
drivers/gpu/host1x/dev.o: In function `host1x_probe':
dev.c:(.text.host1x_probe+0x31c): undefined reference to `init_iova_domain'
dev.c:(.text.host1x_probe+0x38c): undefined reference to `put_iova_domain'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_init':
cdma.c:(.text.host1x_cdma_init+0x238): undefined reference to `alloc_iova'
cdma.c:(.text.host1x_cdma_init+0x2c0): undefined reference to `__free_iova'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_deinit':
cdma.c:(.text.host1x_cdma_deinit+0xb0): undefined reference to `free_iova'
This adds the same select statement that we have for drm_tegra.
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419182449.885312-1-arnd@arndb.de
Shutting down a host1x device currently crashes if the device has failed
to probe. The root cause is that the host1x shutdown is implemented as a
struct bus_type callback, but in turn relies on the driver bound to the
device. On failure to probe, no driver will be bound and cause the code
to crash.
Fix this by moving the ->probe(), ->remove() and ->shutdown() callbacks
to the driver rather than the bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Newer versions of Tegra come with early boot software that aggressively
puts various modules in reset. Add support to the host1x driver to take
the module out of reset on probe, and assert reset on removal.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sorting includes alphabetically makes it easier and less conflict-prone
to add new includes subsequently.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for the Host1x unit to be located behind
an IOMMU. This is required when gather buffers may be
allocated non-contiguously in physical memory, as can
be the case when TegraDRM is also using the IOMMU.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The check for valid syncpoint IDs is off by one. While at it, rewrite
the check to make it more easily understandable.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently syncpoints are not locked by mutex and this causes races
if we are aggressively freeing and allocating syncpoints.
This patch adds missing mutex protection to syncpoint structures.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Reviewed-by: Shridhar Rasal <srasal@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: use better label names, don't reset local variable]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently job pinning is optimized to handle only the first buffer
using a certain host1x_bo object and all subsequent buffers using
the same host1x_bo are considered done.
In most cases this is correct, however, in case the same host1x_bo
is used in multiple gathers inside the same job, we skip also
storing the device address (physical or iova) to this buffer.
This patch reworks the host1x_job_pin() to store the device address
to all gathers.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The MIPI DSI output on Tegra SoCs requires some external logic to
calibrate the MIPI pads before a video signal can be transmitted. This
MIPI calibration logic requires to be powered on while the MIPI pads are
being used, which is currently done as part of the DSI driver's probe
implementation.
This is suboptimal because it will leave the MIPI calibration logic
powered up even if the DSI output is never used.
On Tegra114 and earlier this behaviour also causes the driver to hang
while trying to power up the MIPI calibration logic because the power
partition that contains the MIPI calibration logic will be powered on
by the display controller at output pipeline configuration time. Thus
the power up sequence for the MIPI calibration logic happens before
it's power partition is guaranteed to be enabled.
Fix this by splitting up the API into a request/free pair of functions
that manage the runtime dependency between the DSI and the calibration
modules (no registers are accessed) and a set of enable, calibrate and
disable functions that program the MIPI calibration logic at points in
time where the power partition is really enabled.
While at it, make sure that the runtime power management also works in
ganged mode, which is currently also broken.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The local 'val' variable is used to store a value and immediately return
it to its caller, and hence serves no purpose. Just drop it and directly
return the value.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no need to wrap the BIT() macro into an extra set of parentheses
because it's already implemented to use its own set.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Insert a number of blank lines in places where they increase readability
of the code. Also collapse various variable declarations to shorten some
functions and finally rewrite some code for readability.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix a couple of occurrences where no blank line was used to separate
variable declarations from code or where block comments were wrongly
formatted.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use kcalloc() to allocate arrays rather than passing the product of the
size per element by the number of elements to kzalloc().
Signed-off-by: Thierry Reding <treding@nvidia.com>
The local 'pos' variable doesn't serve any purpose other than being a
shortcut for pb->pos, but the result doesn't remove much, so simply drop
the local variable.
Signed-off-by: Thierry Reding <treding@nvidia.com>
find_first_zero_bit() returns an unsigned long, so make the local
variable that stores the result the same type for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
IDs can never be negative so use unsigned int. In some instances an
explicitly sized type (such as u32) was used for no particular reason,
so turn those into unsigned int as well for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The number of channels, syncpoints, bases and mlocks can never be
negative, so use unsigned int instead of int. Also make loop variables
the same type for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
System workqueues have been able to handle high level of concurrency
for a long time now and there's no reason to use dedicated workqueues
just to gain concurrency. Since the workqueue host->intr_wq is involved
in sync point interrupts, and sync point wait and is not being used on
a memory reclaim path, dedicated host->intr_wq has been replaced with the
use of system_wq.
Unlike a dedicated per-cpu workqueue created with create_workqueue(),
system_wq allows multiple work items to overlap executions even on
the same CPU; however, a per-cpu workqueue doesn't have any CPU
locality or global ordering guarantees unless the target CPU is
explicitly specified and thus the increase of local concurrency
shouldn't make any difference.
cancel_work_sync() has been used in _host1x_free_syncpt_irq() to ensure
that no work is pending by the time exit path runs.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.6 kernel.
Overall the coolest thing here for me is the nouveau maxwell signed
firmware support from NVidia, it's taken a long while to extract this
from them.
I also wish the ARM vendors just designed one set of display IP, ARM
display block proliferation is definitely increasing.
Core:
- drm_event cleanups
- Internal API cleanup making mode_fixup optional.
- Apple GMUX vga switcheroo support.
- DP AUX testing interface
Panel:
- Refactoring of DSI core for use over more transports.
New driver:
- ARM hdlcd driver
i915:
- FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
- Ongoing atomic display support work
- Ongoing runtime PM work
- Pixel clock limit checks
- VBT DSI description support
- GEM fixes
- GuC firmware scheduler enhancements
amdkfd:
- Deferred probing fixes to avoid make file or link ordering.
amdgpu/radeon:
- ACP support for i2s audio support.
- Command Submission/GPU scheduler/GPUVM optimisations
- Initial GPU reset support for amdgpu
vmwgfx:
- Support for DX10 gen mipmaps
- Pageflipping and other fixes.
exynos:
- Exynos5420 SoC support for FIMD
- Exynos5422 SoC support for MIPI-DSI
nouveau:
- GM20x secure boot support - adds acceleration for Maxwell GPUs.
- GM200 support
- GM20B clock driver support
- Power sensors work
etnaviv:
- Correctness fixes for GPU cache flushing
- Better support for i.MX6 systems.
imx-drm:
- VBlank IRQ support
- Fence support
- OF endpoint support
msm:
- HDMI support for 8996 (snapdragon 820)
- Adreno 430 support
- Timestamp queries support
virtio-gpu:
- Fixes for Android support.
rockchip:
- Add support for Innosilicion HDMI
rcar-du:
- Support for 4 crtcs
- R8A7795 support
- RCar Gen 3 support
omapdrm:
- HDMI interlace output support
- dma-buf import support
- Refactoring to remove a lot of legacy code.
tilcdc:
- Rewrite of pageflipping code
- dma-buf support
- pinctrl support
vc4:
- HDMI modesetting bug fixes
- Significant 3D performance improvement.
fsl-dcu (FreeScale):
- Lots of fixes
tegra:
- Two small fixes
sti:
- Atomic support for planes
- Improved HDMI support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
drm/amdgpu: release_pages requires linux/pagemap.h
drm/sti: restore mode_fixup callback
drm/amdgpu/gfx7: add MTYPE definition
drm/amdgpu: removing BO_VAs shouldn't be interruptible
drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
drm/amd/powerplay: show uvd/vce power gate info for fiji
drm/amdgpu: use sched fence if possible
drm/amdgpu: move ib.fence to job.fence
drm/amdgpu: give a fence param to ib_free
drm/amdgpu: include the right version of gmc header files for iceland
drm/radeon: fix indentation.
drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
drm/amdgpu: switch back to 32bit hw fences v2
drm/amdgpu: remove amdgpu_fence_is_signaled
drm/amdgpu: drop the extra fence range check v2
drm/amdgpu: signal fences directly in amdgpu_fence_process
drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
drm/amdgpu: keep all fences in an RCU protected array v2
drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
drm/amdgpu: RCU protected amd_sched_fence_release
...
Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=i5YM
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v4.6-rc1
Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.
* tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
gpu: host1x: Use a signed return type for do_relocs()
gpu: host1x: bus: Add missing of_node_put()
The return type "unsigned int" was used by the do_relocs() function
despite the fact that it will eventually return a negative error code.
Use a signed integer instead to accomodate for error codes.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
for_each_child_of_node() performs an of_node_get() on each iteration, so
to break out of the loop an of_node_put() is required.
Found using Coccinelle. The semantic patch used for this is as follows:
// <smpl>
@@
expression e;
local idexpression n;
@@
for_each_child_of_node(..., n) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.
Build tested successfully with allmodconfig.
The following Coccinelle SmPL patch was used for this simple
transformation:
@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@
-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)
@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@
-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)
@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@
-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)
We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.
Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently host1x-instanciated devices have their dma_ops left to NULL,
which makes any DMA operation (like buffer import) on ARM64 fallback
to the dummy_dma_ops and fail with an error.
This patch calls of_dma_configure() with the host1x node when creating
such a device, so the proper DMA operations are set.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The default DMA mask covers a 32 bits address range, but host1x devices
can address a larger range on TK1 and TX1. Set the DMA mask to the range
addressable when we use the IOMMU to prevent the use of bounce buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host1x unit found in Tegra210 SoCs is very similar to the unit in
Tegra124, but it has 2 additional channels for a total of 14 channels.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When unregistering a host1x driver, make sure to unregister the core
driver as well to prevent it from sticking around and oppose reloading
of the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These new helpers simplify implementing multi-driver modules and
properly handle failure to register one driver by unregistering all
previously registered drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
MLOCK's debug info, spewed on CDMA timeout, contains meaningless MLOCK
owner channel ID because HOST1X_SYNC_MLOCK_OWNER_CHID_F() returns shifted
value, while unshifted should be used. Fix it by changing '_F' to '_V'.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-By: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Keep track of the number of users of DSI and CSI pads and power down the
regulators that supply the bricks when all users are gone.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some changes are needed to the configuration settings for some lanes. In
addition, the clock lanes for the CSI pads can no longer be calibrated.
Signed-off-by: Thierry Reding <treding@nvidia.com>
While Tegra132 has the same pads as Tegra124, some configuration values
need to be programmed slightly differently.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Before starting a new calibration cycle, make sure to clear the current
status by writing a 1 to the various "calibration done" bits.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use more consistent names for the clock lane configuration registers and
fix the offset of the upper clock lane configuration register for the
first DSI pad.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Parameterize more of the register programming to accomodate for changes
required by future SoC generations.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is used to read the current value of the syncpt and is
useful in situations where drivers don't schedule work and wait for the
syncpoint to increment. One particular use-case is using the syncpoint
as a VBLANK counter.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously the struct bus_type exported by the host1x infrastructure was
only a very basic skeleton. Turn that implementation into a more full-
fledged bus to support proper probe ordering and power management.
Note that the bus infrastructure needs to be available before any of the
drivers can be registered. This is automatically ensured if all drivers
are built as loadable modules (via symbol dependencies). If all drivers
are built-in there are no such guarantees and the link order determines
the initcall ordering. Adjust drivers/gpu/Makefile to make sure that the
host1x bus infrastructure is initialized prior to any of its users (only
drm/tegra currently).
v2: Fix building host1x and tegra-drm as modules
Reported-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of locking within host1x_device_add(), call it under the lock to
make the locking more consistent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When a driver's ->probe() function fails, the host1x bus must not call
its ->remove() function because the driver will already have cleaned up
in the error handling path in ->probe().
Signed-off-by: Thierry Reding <treding@nvidia.com>
During calibration, sets the "internal reference level for drive pull-
down" to the value specified in the Tegra TRM.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Include the clock lanes when calibrating the MIPI PHY on Tegra124
compatible devices.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[treding@nvidia.com: bikeshedding]
Signed-off-by: Thierry Reding <treding@nvidia.com>
By paving the CTRL reg value, the current code changes MIPI_CAL_PRESCALE
("Auto-cal calibration step prescale") from 1us to 0.1us (val=0). In the
description for PHY's noise filter (MIPI_CAL_NOISE_FLT), the TRM states
that if the value of the prescale is 0 (or 0.1us), the filter should be
set between 2-5. However, the current code sets it to 0.
For now, let's keep the prescale and filter values as-is, which is most
likely the power-on-reset values of 0x2 and 0xa, respectively.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On 64-bit platforms an unsigned long would be 64 bit and cause
unnecessary casting when being passed to writel() or returned from
readl(). Make register values 32 bits wide to avoid that.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the u32 type for the offset in the host1x_job_gather structure for
consistentcy with other structures. Negative offsets don't make sense in
this context.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This reduces the amount of casting that needs to be done to get rid of
annoying warnings on 64-bit builds.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than cast to a u32 use the struct host1x_bo pointers directly.
This avoid annoying warnings for 64-bit builds.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Job submission currently relies on the fact that struct drm_tegra_reloc
and struct host1x_reloc are the same size and uses a simple call to the
copy_from_user() function to copy them to kernel space. This causes the
handle to be stored in the buffer object field, which then needs a cast
to a 32 bit integer to resolve it to a proper buffer object pointer and
store it back in the buffer object field.
On 64-bit architectures that will no longer work, since pointers are 64
bits wide whereas handles will remain 32 bits. This causes the sizes of
both structures to because different and copying will no longer work.
Fix this by adding a new function, host1x_reloc_get_user(), that copies
the structures field by field.
While at it, use substructures for the command and target buffers in
struct host1x_reloc for better readability. Also use unsized types to
make it more obvious that this isn't part of userspace ABI.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The internal host1x_{,un}register_client() functions can potentially be
confused with public the host1x_client_{,un}register() functions.
Rename them to host1x_{add,del}_client() to remove some of the possible
confusion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
BIT_WORD() truncates rather than rounds, so the loops in
syncpt_thresh_isr() and _host1x_intr_disable_all_syncpt_intrs() use <=
rather than < in an attempt to process the correct number of registers
when rounding of the conversion of count of bits to count of words is
necessary. However, when rounding isn't necessary because the value is
already a multiple of the divisor (as is the case for all values of
nb_pts the code actually sees), this causes one too many registers to
be processed.
Solve this by using and explicit DIV_ROUND_UP() call, rather than
BIT_WORD(), and comparing with < rather than <=.
Fixes: 7ede0b0bf3 ("gpu: host1x: Add syncpoint wait and interrupts")
Cc: <stable@vger.kernel.org> # 3.10
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement eDP support for Tegra124 and support the PRIME vmap()/vunmap()
operations.
A symbol that is required for upcoming V4L2 support is now exported by
the host1x driver.
Relicense drivers under the GPL v2 for consistency. One exception is the
public header file, which is relicensed under MIT to abide by the common
rule.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=LGu0
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.15-rc1
Implement eDP support for Tegra124 and support the PRIME vmap()/vunmap()
operations.
A symbol that is required for upcoming V4L2 support is now exported by
the host1x driver.
Relicense drivers under the GPL v2 for consistency. One exception is the
public header file, which is relicensed under MIT to abide by the common
rule.
* tag 'drm/tegra/for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Use standard GPL v2 license text
drm/tegra: Relicense under GPL v2
drm/tegra: Relicense public header under MIT
drm/tegra: Add eDP support
gpu: host1x: export host1x_syncpt_incr_max() function
drm/tegra: prime: Add vmap support
Tegra V4L2 camera driver needs this function to do frame capture.
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When patching gathers, we don't need to check against
gathers with lower indices than the current one, as
they are guaranteed to already have been handled.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra124 has 192 syncpoints whereas its predecessors had 32 syncpoints.
This required changes to the hardware register layout.
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When debugfs support isn't enabled, gcc complains about some variables
being unused. To avoid further #ifdefery, move debugfs specific setup
code into static functions and use IS_ENABLED(CONFIG_DEBUG_FS) to have
the compiler, rather than the preprocessor, discard them when unused.
The advantage of doing it this way is that all the code will be
compile-tested whether or not debugfs support is enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ARCH_MULTIPLATFORM dependency was introduced back when Tegra didn't
support multiplatform yet as a means to allow the driver to be easily
compile-tested along with other DRM drivers. In the meantime, the new
COMPILE_TEST Kconfig option has been introduced for exactly that
purpose, so use that instead to clarify the intention.
Signed-off-by: Thierry Reding <treding@nvidia.com>