In Makefile.config, we define the conditional compilation variables
HAVE_LIBPERL_SUPPORT and HAVE_LIBPYTHON_SUPPORT.
To make the C code more consistent, this patch replaces
NO_LIBPERL/NO_LIBPYTHON in C code with HAVE_LIBPERL_SUPPORT/
HAVE_LIBPYTHON_SUPPORT.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1523269609-28824-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jesper wanted to see offsets at callq sites when doing some performance
investigation related to retpolines, so save him some time by providing
an 'struct annotation_options' to control where offsets should appear:
just on jump targets? That + call instructions? All?
This puts in place the logic to show the offsets, now we need to wire
this up in the TUI browser (next patch) and on the 'perf annotate --stdio2"
interface, where we need a more general mechanism to setup the
'annotation_options' struct from the command line.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-m3jc9c3swobye9tj08gnh5i7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As stated in tests/llvm-src-base.c, the name of the bpf function should
be "bpf_func__SyS_epoll_pwait" but this clang test fails as it tries to
lookup "bpf_func__SyS_epoll_wait".
Before applying patch:
55: builtin clang support :
55.1: builtin clang compile C source to IR : FAILED!
55.2: builtin clang compile C source to ELF object : Skip
After applying patch:
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: e67d52d411 ("perf clang: Update test case to use real BPF script")
Link: http://lkml.kernel.org/r/20180404180419.19056-3-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The clang API calls used by perf have changed in recent releases and
builds succeed with libclang-3.9 only. This introduces compatibility
with libclang-4.0 and above.
Without this patch, we will see the following compilation errors with
libclang-4.0+:
util/c++/clang.cpp: In function ‘clang::CompilerInvocation* perf::createCompilerInvocation(llvm::opt::ArgStringList, llvm::StringRef&, clang::DiagnosticsEngine&)’:
util/c++/clang.cpp:62:33: error: ‘IK_C’ was not declared in this scope
Opts.Inputs.emplace_back(Path, IK_C);
^~~~
util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::Module> perf::getModuleFromSource(llvm::opt::ArgStringList, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)’:
util/c++/clang.cpp:75:26: error: no matching function for call to ‘clang::CompilerInstance::setInvocation(clang::CompilerInvocation*)’
Clang.setInvocation(&*CI);
^
In file included from util/c++/clang.cpp:14:0:
/usr/include/clang/Frontend/CompilerInstance.h:231:8: note: candidate: void clang::CompilerInstance::setInvocation(std::shared_ptr<clang::CompilerInvocation>)
void setInvocation(std::shared_ptr<CompilerInvocation> Value);
^~~~~~~~~~~~~
Committer testing:
Tested on Fedora 27 after installing the clang-devel and llvm-devel
packages, versions:
# rpm -qa | egrep llvm\|clang
llvm-5.0.1-6.fc27.x86_64
clang-libs-5.0.1-5.fc27.x86_64
clang-5.0.1-5.fc27.x86_64
clang-tools-extra-5.0.1-5.fc27.x86_64
llvm-libs-5.0.1-6.fc27.x86_64
llvm-devel-5.0.1-6.fc27.x86_64
clang-devel-5.0.1-5.fc27.x86_64
#
Make sure you don't have some older version lying around in /usr/local,
etc, then:
$ make LIBCLANGLLVM=1 -C tools/perf install-bin
And in the end perf will be linked agains these libraries:
# ldd ~/bin/perf | egrep -i llvm\|clang
libclangAST.so.5 => /lib64/libclangAST.so.5 (0x00007f8bb2eb4000)
libclangBasic.so.5 => /lib64/libclangBasic.so.5 (0x00007f8bb29e3000)
libclangCodeGen.so.5 => /lib64/libclangCodeGen.so.5 (0x00007f8bb23f7000)
libclangDriver.so.5 => /lib64/libclangDriver.so.5 (0x00007f8bb2060000)
libclangFrontend.so.5 => /lib64/libclangFrontend.so.5 (0x00007f8bb1d06000)
libclangLex.so.5 => /lib64/libclangLex.so.5 (0x00007f8bb1a3e000)
libclangTooling.so.5 => /lib64/libclangTooling.so.5 (0x00007f8bb17d4000)
libclangEdit.so.5 => /lib64/libclangEdit.so.5 (0x00007f8bb15c5000)
libclangSema.so.5 => /lib64/libclangSema.so.5 (0x00007f8bb0cc9000)
libclangAnalysis.so.5 => /lib64/libclangAnalysis.so.5 (0x00007f8bb0a23000)
libclangParse.so.5 => /lib64/libclangParse.so.5 (0x00007f8bb0725000)
libclangSerialization.so.5 => /lib64/libclangSerialization.so.5 (0x00007f8bb039a000)
libLLVM-5.0.so => /lib64/libLLVM-5.0.so (0x00007f8bace98000)
libclangASTMatchers.so.5 => /lib64/../lib64/libclangASTMatchers.so.5 (0x00007f8bab735000)
libclangFormat.so.5 => /lib64/../lib64/libclangFormat.so.5 (0x00007f8bab4b2000)
libclangRewrite.so.5 => /lib64/../lib64/libclangRewrite.so.5 (0x00007f8bab2a1000)
libclangToolingCore.so.5 => /lib64/../lib64/libclangToolingCore.so.5 (0x00007f8bab08e000)
#
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: 00b86691c7 ("perf clang: Add builtin clang support ant test case")
Link: http://lkml.kernel.org/r/20180404180419.19056-2-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only thing that is needed there is a forward declaration for 'struct
nsinfo', so disentanble this, which in turns allows built-in clang
builds, i.e. 'make LIBCLANGLLVM=1 -C tools/perf'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vq26rsuwq1cqylpcyvq89c84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end, move
CPU filtering into it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following message, emitted when samples are lost due to system
overload, had one 'samples' too many, ditch it:
Processed 25333 samples and lost 20.88% samples!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-oev1469y02hmfere6r2kkxp6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match what is shown in the main 'perf report/top' title lines, i.e.
if a group is being shown, either a real group (recorded with "-e
'{a,b,c}') or a forced group (using 'perf report --group' for a
perf.data file recorded without {}) we will show multiple columns,
one per event, but we were failing to show the group details, so, for:
# perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -e {cycles,instructions,cache-misses}
# perf report --group
The first line was showing just "cycles", now it shows the correct line,
which is:
Samples: 578 of events 'anon group { cycles, instructions, cache-misses }', 4000 Hz, Event count (approx.): 487421794
syscall_return_via_sysret /lib/modules/4.16.0-rc7/build/vmlinux
0.22 2.97 0.00 │ ↓ jmp 6c
│ mov %cr3,%rdi
1.33 10.89 4.00 │ ↓ jmp 62
│ mov %rdi,%rax
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6920e2854e ("perf annotate browser: Show extra title line with event information")
Link: https://lkml.kernel.org/n/tip-i41tqh17c2dabnyzjh99r1oz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end,
move memory allocation for struct buffer into it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To print a string using the total period (nr_events) and the number of
samples for a given annotation, i.e. for a given symbol, the counterpart
to hists__scnprintf_samples_period(), that is for all the samples in a
session (be it a live session, think 'perf top' or a perf.data file,
think 'perf report').
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-goj2wu4fxutc8vd46mw3yg14@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous patch made this function useful to non-TUI parts of the
tools, but left it where the function from what it was carved, so that
the patch showed more clearly the process.
Now just move it outside the TUI parts so that we can finally use it,
even when the TUI code doesn't get built/linked.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-hqj7hvcr3mu5lvcqp3cssio6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is not use any struct hists_browser internals, so that it can be
shared with the other UIs and tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-w8mczjnqnbcj9yzfkv9ja6ro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In Makefile.config, to make all libraries flags have _SUPPORT suffix,
rename HAVE_DWARF_GETLOCATIONS to HAVE_DWARF_GETLOCATIONS_SUPPORT
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1522402036-22915-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous patch is insufficient to cure the reported 'perf trace'
segfault, as it only cures the perf_mmap__read_done() case, moving the
segfault to perf_mmap__read_init() functio, fix it by doing the same
refcount check.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8872481bd0 ("perf mmap: Introduce perf_mmap__read_init()")
Link: https://lkml.kernel.org/r/20180326144127.GF18897@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a segmentation fault when running 'perf trace'. For example:
[root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data
The perf_mmap__consume() could unmap the mmap. It needs to check the
refcnt in perf_mmap__read_done().
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ee023de05f ("perf mmap: Introduce perf_mmap__read_done()")
Link: http://lkml.kernel.org/r/1522071729-16776-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These types of jumps were confusing the annotate browser:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
Percent│ffffffff81a00020: swapgs
<SNIP>
│ffffffff81a00128: ↓ jae ffffffff81a00139 <syscall_return_via_sysret+0x53>
<SNIP>
│ffffffff81a00155: → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
I.e. the syscall_return_via_sysret function is actually "inside" the
entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53)
are relative to syscall_return_via_sysret, not to syscall_return_via_sysret.
Or this may be some artifact in how the assembler marks the start and
end of a function and how this ends up in the ELF symtab for vmlinux,
i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but
just right after it.
From readelf -sw vmlinux:
80267: ffffffff81a00020 315 NOTYPE GLOBAL DEFAULT 1 entry_SYSCALL_64
316: ffffffff81a000e6 0 NOTYPE LOCAL DEFAULT 1 syscall_return_via_sysret
0xffffffff81a00020 + 315 > 0xffffffff81a000e6
So instead of looking for offsets after that last '+' sign, calculate
offsets for jump target addresses that are inside the function being
disassembled from the absolute address, 0xffffffff81a00139 in this case,
subtracting from it the objdump address for the start of the function
being disassembled, entry_SYSCALL_64() in this case.
So, before this patch:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
Percent│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↑ jmp 6c
│ mov %cr3,%rdi
│ ↑ jmp 62
│ mov %rdi,%rax
│ and $0x7ff,%rdi
│ bt %rdi,%gs:0x2219a
│ ↑ jae 53
│ btr %rdi,%gs:0x2219a
│ mov %rax,%rdi
│ ↑ jmp 5b
After:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
0.65 │ → jne swapgs_restore_regs_and_return_to_usermode
│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↓ jmp 132
│ mov %cr3,%rdi
│ ┌──jmp 128
│ │ mov %rdi,%rax
│ │ and $0x7ff,%rdi
│ │ bt %rdi,%gs:0x2219a
│ │↓ jae 119
│ │ btr %rdi,%gs:0x2219a
│ │ mov %rax,%rdi
│ │↓ jmp 121
│119:│ mov %rax,%rdi
│ │ bts $0x3f,%rdi
│121:│ or $0x800,%rdi
│128:└─→or $0x1000,%rdi
│ mov %rdi,%cr3
│132: pop %rax
│ pop %rdi
│ pop %rsp
│ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
With those at least navigating to the right destination, an improvement
for these cases seems to be to be to somehow mark those inner functions,
which in this case could be:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
│syscall_return_via_sysret:
│ pop %r15
│ pop %r14
│ pop %r13
│ pop %r12
│ pop %rbp
│ pop %rbx
│ pop %rsi
│ pop %r10
│ pop %r9
│ pop %r8
│ pop %rax
│ pop %rsi
│ pop %rdx
│ pop %rsi
│ mov %rsp,%rdi
│ mov %gs:0x5004,%rsp
│ pushq 0x28(%rdi)
│ pushq (%rdi)
│ push %rax
│ ↓ jmp 132
│ mov %cr3,%rdi
│ ┌──jmp 128
│ │ mov %rdi,%rax
│ │ and $0x7ff,%rdi
│ │ bt %rdi,%gs:0x2219a
│ │↓ jae 119
│ │ btr %rdi,%gs:0x2219a
│ │ mov %rax,%rdi
│ │↓ jmp 121
│119:│ mov %rax,%rdi
│ │ bts $0x3f,%rdi
│121:│ or $0x800,%rdi
│128:└─→or $0x1000,%rdi
│ mov %rdi,%cr3
│132: pop %rax
│ pop %rdi
│ pop %rsp
│ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8>
This all gets much better viewed if one uses 'perf report --ignore-vmlinux'
forcing the usage of /proc/kcore + /proc/kallsyms, when the above
actually gets down to:
# perf report --ignore-vmlinux
## do '/64', will show the function names containing '64',
## navigate to /entry_SYSCALL_64_after_hwframe.annotation,
## press 'A' to annotate, then 'P' to print that annotation
## to a file
## From another xterm (or see on screen, this 'P' thing is for
## getting rid of those right side scroll bars/spaces):
# cat /entry_SYSCALL_64_after_hwframe.annotation
entry_SYSCALL_64_after_hwframe() /proc/kcore
Event: cycles:ppp
Percent
Disassembly of section load0:
ffffffff9aa00044 <load0>:
11.97 push %rax
4.85 push %rdi
push %rsi
2.59 push %rdx
2.27 push %rcx
0.32 pushq $0xffffffffffffffda
1.29 push %r8
xor %r8d,%r8d
1.62 push %r9
0.65 xor %r9d,%r9d
1.62 push %r10
xor %r10d,%r10d
5.50 push %r11
xor %r11d,%r11d
3.56 push %rbx
xor %ebx,%ebx
4.21 push %rbp
xor %ebp,%ebp
2.59 push %r12
0.97 xor %r12d,%r12d
3.24 push %r13
xor %r13d,%r13d
2.27 push %r14
xor %r14d,%r14d
4.21 push %r15
xor %r15d,%r15d
0.97 mov %rsp,%rdi
5.50 → callq do_syscall_64
14.56 mov 0x58(%rsp),%rcx
7.44 mov 0x80(%rsp),%r11
0.32 cmp %rcx,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 shl $0x10,%rcx
0.32 sar $0x10,%rcx
3.24 cmp %rcx,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
2.27 cmpq $0x33,0x88(%rsp)
1.29 → jne swapgs_restore_regs_and_return_to_usermode
mov 0x30(%rsp),%r11
8.74 cmp %r11,0x90(%rsp)
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 test $0x10100,%r11
→ jne swapgs_restore_regs_and_return_to_usermode
0.32 cmpq $0x2b,0xa0(%rsp)
0.65 → jne swapgs_restore_regs_and_return_to_usermode
I.e. using kallsyms makes the function start/end be done differently
than using what is in the vmlinux ELF symtab and actually the hits
goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the
start of entry_SYSCALL_64:
ENTRY(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
<SNIP>
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
GLOBAL(entry_SYSCALL_64_after_hwframe)
pushq %rax /* pt_regs->orig_ax */
PUSH_AND_CLEAR_REGS rax=$-ENOSYS
And it goes and ends at:
cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */
jne swapgs_restore_regs_and_return_to_usermode
/*
* We win! This label is here just for ease of understanding
* perf profiles. Nothing jumps here.
*/
syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
UNWIND_HINT_EMPTY
POP_REGS pop_rdi=0 skip_r11rcx=1
So perhaps some people should really just play with '--ignore-vmlinux'
to force /proc/kcore + kallsyms.
One idea is to do both, i.e. have a vmlinux annotation and a
kcore+kallsyms one, when possible, and even show the patched location,
etc.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That strchr() in jump__scnprintf() needs to be nuked somehow, as it,
IIRC is already done in jump__parse() and if needed at scnprintf() time,
should be stashed in the struct filled in parse() time.
For now jus defer it to just before where it is used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j0t5hagnphoz9xw07bh3ha3g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For instance:
entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux
5.50 │ → callq do_syscall_64
14.56 │ mov 0x58(%rsp),%rcx
7.44 │ mov 0x80(%rsp),%r11
0.32 │ cmp %rcx,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ shl $0x10,%rcx
0.32 │ sar $0x10,%rcx
3.24 │ cmp %rcx,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
2.27 │ cmpq $0x33,0x88(%rsp)
1.29 │ → jne swapgs_restore_regs_and_return_to_usermode
│ mov 0x30(%rsp),%r11
8.74 │ cmp %r11,0x90(%rsp)
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ test $0x10100,%r11
│ → jne swapgs_restore_regs_and_return_to_usermode
0.32 │ cmpq $0x2b,0xa0(%rsp)
0.65 │ → jne swapgs_restore_regs_and_return_to_usermode
It'll behave just like a "call" instruction, i.e. press enter or right
arrow over one such line and the browser will navigate to the annotated
disassembly of that function, which when exited, via left arrow or esc,
will come back to the calling function.
Now to support jump to an offset on a different function...
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because they all really check if we can access data structures/visual
constructs where a "jump" instruction targets code in the same function,
i.e. things like:
__pthread_mutex_lock /usr/lib64/libpthread-2.26.so
1.95 │ mov __pthread_force_elision,%ecx
│ ┌──test %ecx,%ecx
0.07 │ ├──je 60
│ │ test $0x300,%esi
│ │↓ jne 60
│ │ or $0x100,%esi
│ │ mov %esi,0x10(%rdi)
│ 42:│ mov %esi,%edx
│ │ lea 0x16(%r8),%rsi
│ │ mov %r8,%rdi
│ │ and $0x80,%edx
│ │ add $0x8,%rsp
│ │→ jmpq __lll_lock_elision
│ │ nop
0.29 │ 60:└─→and $0x80,%esi
0.07 │ mov $0x1,%edi
0.29 │ xor %eax,%eax
2.53 │ lock cmpxchg %edi,(%r8)
And not things like that "jmpq __lll_lock_elision", that instead should behave
like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Python None objects are handled just like all the other objects with
respect to their reference counting. Before returning Py_None, its
reference count thus needs to be bumped.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@mellanox.com>
Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Things like this in _cpp_lex_token (gcc's cc1 program):
cpp_named_operator2name@@Base+0xa72
Point to a place that is after the cpp_named_operator2name boundaries,
i.e. in the ELF symbol table for cc1 cpp_named_operator2name is marked
as being 32-bytes long, but it in fact is much larger than that, so we
seem to need a symbols__find() routine that looks for >= current->start
and < next_symbol->start, possibly just for C++ objects?
For now lets just make some progress by marking jumps to outside the
current function as call like.
Actual navigation will come next, with further understanding of how the
symbol searching and disassembly should be done.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-aiys0a0bsgm3e00hbi6fg7yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need that to figure out if jumps have targets in a different
function.
E.g. _cpp_lex_token(), in /usr/libexec/gcc/x86_64-redhat-linux/5.3.1/cc1
has a line like this:
jne c469be <cpp_named_operator2name@@Base+0xa72>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ris0ioziyp469pofpzix2atb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we already set notes->start to map__rip_2objdump(map, sym->start)
in symbol__annotate2(), no need to calculate that address again in
symbol__calc_lines(), just use notes->start.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ycxlg8mm5ueuj21w6gi62l7g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like we have in the histograms browser used as the main screen for
'perf top --tui' and 'perf report --tui', to print the current
annotation to a file with a named composed by the symbol name and the
".annotation" suffix.
Here is one example of pressing 'A' on 'perf top' to live annotate a
kernel function and then press 'P' to dump that annotation, the
resulting file:
# cat _raw_spin_lock_irqsave.annotation
_raw_spin_lock_irqsave() /proc/kcore
Event: cycles:ppp
7.14 nop
21.43 push %rbx
7.14 pushfq
pop %rax
nop
mov %rax,%rbx
cli
nop
xor %eax,%eax
mov $0x1,%edx
64.29 lock cmpxchg %edx,(%rdi)
test %eax,%eax
↓ jne 2b
mov %rbx,%rax
pop %rbx
← retq
2b: mov %eax,%esi
→ callq queued_spin_lock_slowpath
mov %rbx,%rax
pop %rbx
← retq
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zzmnrwugb5vtk7bvg0rbx150@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more thing that goes from the TUI code to be used more widely,
for instance it'll affect the default options used by:
perf annotate --stdio2
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0nsz0dm0akdbo30vgja2a10e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the TUI logic that allows toggling the presentation of source
code lines.
Will be used in the upcoming --stdio2 mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g0ckz9ajy6unswrv2iy39mxk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To simplify the passing of arguments, the --stdio2 code will have to set
all the fields with operations printing to stdout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-pcs3c7vdy9ucygxflo4nl1o7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We pass some more callbacks and all of annotate_browser__write() seems
to be free of TUI code (except for some arrow constants, will fix).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5uo6yvwnxtsbe8y6v0ysaakf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the --tui and --stdio2 cases using callbacks for print() and
set_percent_color() end up being the easiest path, real GUI remains as
an exercise.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1o7az1ng55g2g6ppr2jpeuct@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the annotate_browser__write() routine, to be used in the --stdio2
mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0he0wyy4haswqi1qb35x37do@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That does all the extended boilerplate the TUI browser did, leaving the
symbol__annotate() function to be used by the old --stdio output mode.
Now the upcoming --stdio2 output mode should just use this one to set
things up.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-e2x8wuf6gvdhzdryo229vj4i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More non-TUI stuff goes to the UI-agnostic library
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hngv7rpqvtta69ouj7ne770q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patch left it where it was to ease review, move it to its
right place.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ikdjr014p7k5kachgyjrgiey@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This also will be used in other output formats, such as --stdio2.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-86h6ftebc62ij1rx8q9zkpwk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More non-strictly TUI code being moved to the UI neutral annotation
library, to be used in the upcoming --stdio2 output mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ek20dnd8z2y5v54pcepihybz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More non-TUI stuff.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yd4g6q0rngq4i49hz6iymtta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another field that is not TUI specific.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jj3dwswndft5mln8hu9k0idv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The information in there are all related to things already moved to
struct annotation, so move those members to struct annotation_line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-uc2b9c8iocvuuvbl7hyind84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This also is not TUI specific, should be used in the upcoming --stdio2
mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v827xec8z3hxrmgp7bwa6ohs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is another information that will be useful for the --stdio2 mode,
to provide symbol statistics, so move it from the TUI and change the
mark_jump_targets() method to struct annotation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kpgle1qxe7thajvrqleuvi80@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not useful only for the TUI, we'll want to somehow mark the
--stdio2 lines with the most jump sources too.
And moving this will allow us to change some function signatures from
annotate_browser to ui_browser, reducing boilerplate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vyggbbqd05k3k4mvv7z9l5px@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the TUI code, since now all it touches is what is in 'struct
annotation'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kh5bbbgd7l4agv9oc5hnw0ui@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the TUI, that is interactive, its interesting to have a
configuration that one can go on changing and then when moving from one
symbol annotation to another symbol, the options set while browsing the
first symbol to be kept.
But since we're trying to make this code reusable by a --stdio
formatter, we better have a pointer in struct annotation and in the TUI
case set it to the global, but use something else for other cases, such
as --stdio2.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kv1ngr159jfu5h9ddgiuwcvg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Paving the way to move more stuff out of TUI and into the generic
annotation library.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8vqax6wgfqohelot8j8zsfvs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the TUI code, as it has nothing specific to that UI and should be
used in the other output modes as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0jahghvqdodb8vu2591pkv3d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is needed to reduce the differences between the TUI mode and the
other annotation UIs, next csets will move that code to the UI-neutral
annotation library. Leaving it in place for now to ease review.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-gz09ahsd5xm1eip7ura5ow6x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to pave the way to have more functions shared between TUI, stdio
and the upcoming stdio2 formatting, that will use the __scnprintf
functions used by --tui in a --stdio fashion.
This partially addresses the comments added in cset 30e863bb6f ("perf
annotate: Compute IPC and basic block cycles"):
/*
* This should probably be in util/annotate.c to share with the tty
* annotate, but right now we need the per byte offsets arrays,
* which are only here.
*/
The following patches will address the rest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yftvybgx1s8sevs6kp1an0ft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These will be used in --stdio2 so lets move it first to reduce noise in
the following patches.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fisud7pcak3prk7uwsvs3g2e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will be useful when making parts of the TUI browser generic enough
to be used for a new stdio mode, available even when the TUI is not
built in, for explicit user decision or when the necessary library devel
files, for the slang library currently, are not available in the build
system.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-45twzienhz7ypbad0sbvojku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In verbose level 2, errors returned by libdw are reported in most cases,
but not when calling dwfl_attach_state.
Since elfutils v 0.160 (2014), dwfl_attach_state sets the error code to
report failure cause. On failure, log the reported error.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180318175053.4222-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current 'perf probe' converts the type of array-elements incorrectly. It
always converts the types as a pointer of array. This passes the "array"
type DIE to the type converter so that it can get correct "element of
array" type DIE from it.
E.g.
====
$ cat hello.c
#include <stdio.h>
void foo(int a[])
{
printf("%d\n", a[1]);
}
void main()
{
int a[3] = {4, 5, 6};
printf("%d\n", a[0]);
foo(a);
}
$ gcc -g hello.c -o hello
$ perf probe -x ./hello -D "foo a[1]"
====
Without this fix, above outputs
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):u64
====
The "u64" means "int *", but a[1] is "int".
With this,
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):s32
====
So, "int" correctly converted to "s32"
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-trace-users@vger.kernel.org
Fixes: b2a3c12b74 ("perf probe: Support tracing an entry of array")
Link: http://lkml.kernel.org/r/152129114502.31874.2474068470011496356.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a bug where when using 'perf annotate timerqueue_add' the
target for its only routine called with the 'callq' instruction,
'rb_insert_color', doesn't get resolved from its address when parsing
that 'callq' instruction.
That symbol resolution works when using 'perf report --tui' and then
doing annotation for 'timerqueue_add' from there, the vmlinux
dso->symbols rb_tree somehow gets in a state that we can't find that
address, that is a bug that has to be further investigated.
But since the objdump output has the function name, i.e. the raw objdump
disassembled line looks like:
So, before:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq *ffffffff8184dc80
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
# perf report
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
And after both look the same:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
From 'perf report' one can annotate and navigate to that 'rb_insert_color'
function, but not directly from 'perf annotate timerqueue_add', that
remains to be investigated and fixed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nkktz6355rhqtq7o8atr8f8r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The gcc 8 compiler won't compile the python extension code with the
following errors (one example):
python.c:830:15: error: cast between incompatible function types from \
‘PyObject * (*)(struct pyrf_evsel *, PyObject *, PyObject *)’ \
uct _object * (*)(struct pyrf_evsel *, struct _object *, struct _object *)’} to \
‘PyObject * (*)(PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _objeuct \
_object *)’} [-Werror=cast-function-type]
.ml_meth = (PyCFunction)pyrf_evsel__open,
The problem with the PyMethodDef::ml_meth callback is that its type is
determined based on the PyMethodDef::ml_flags value, which we set as
METH_VARARGS | METH_KEYWORDS.
That indicates that the callback is expecting an extra PyObject* arg, and is
actually PyCFunctionWithKeywords type, but the base PyMethodDef::ml_meth type
stays PyCFunction.
Previous gccs did not find this, gcc8 now does. Fixing this by silencing this
warning for python.c build.
Commiter notes:
Do not do that for CC=clang, as it breaks the build in some clang
versions, like the ones in fedora up to fedora27:
fedora:25:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:26:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:27:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
#
those have:
clang version 3.9.1 (tags/RELEASE_391/final)
The one in rawhide accepts that:
clang version 6.0.0 (tags/RELEASE_600/final)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using --quiet to disable messages, we will set the 'quiet' variable
to 'true' first, then check that variable to decide whether we need to
call perf_quiet_option(), so no need to set 'quiet' to 'true' once more
in perf_quiet_option().
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520944274-37001-2-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In overwrite mode, start will be set to head in perf_mmap__read_init().
Therefore, there is no need to set the start one more time in
overwrite_rb_find_range() and *start can be used as head instead of
passing head to overwrite_rb_find_range().
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520944274-37001-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane reported a problem with forced leader in pipe mode, where
report does not force the group output. The reason is that we don't
force the leader in pipe mode.
This patch adds HEADER_LAST_FEATURE mark to have a point where we have
all events and features received, and force the group if requested.
$ perf record --group -e '{cycles, instructions}' -o - kill | perf report -i - --group
SNIP
# Overhead Command Shared Object Symbol
# ................ ....... ................ .......................
#
28.36% 0.00% kill libc-2.25.so [.] __unregister_atfork
26.32% 0.00% kill libc-2.25.so [.] _dl_addr
26.10% 0.00% kill ld-2.25.so [.] _dl_relocate_object
17.32% 0.00% kill ld-2.25.so [.] __tunables_init
1.70% 0.01% kill [unknown] [k] 0xffffffffafa01a40
0.20% 0.00% kill ld-2.25.so [.] _start
0.00% 48.77% kill ld-2.25.so [.] do_lookup_x
0.00% 42.97% kill libc-2.25.so [.] _IO_getline
0.00% 6.35% kill ld-2.25.so [.] strcmp
0.00% 1.71% kill ld-2.25.so [.] _dl_sysdep_start
0.00% 0.19% kill ld-2.25.so [.] _dl_start
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180314092205.23291-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:
util/annotate.c: In function 'symbol__disassemble':
util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
"%s %s%s --start-address=0x%016" PRIx64
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/annotate.c:1498:20:
symfs_filename, symfs_filename);
~~~~~~~~~~~~~~
util/annotate.c:1490:50: note: format string is defined here
" -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
^~
In file included from /usr/include/stdio.h:861,
from util/color.h:5,
from util/sort.h:8,
from util/annotate.c:14:
/usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So switch to asprintf, that will make sure enough space is available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo reported broken -k option behavior. The reason is that we used
symbol_conf.vmlinux_name as a source for mmap event name, but in fact
it's a vmlinux path.
Moving the symbol_conf.vmlinux_name check for both host and guest to the
proper place and out of the machine__set_mmap_name function.
Reported-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: commit ("8c7f1bb37b29 perf machine: Move kernel mmap name into struct machine")
Link: http://lkml.kernel.org/r/20180312152406.10141-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function perf_stat_evsel_id_init() has global linkage but is only used
in util/stat.c. Make it static.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180312103807.45069-2-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to template, display also the real compile command line with
all the variables substituted.
llvm compiling command template: $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS ...
llvm compiling command : /usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=24 -DLINUX_VERSION_CODE=0x41000 ...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180312094313.18738-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Path passed to libdw for unwinding doesn't include symfs path
if specified, so unwinding fails because ELF file is not found.
Similar to unwinding with libunwind, pass symsrc_filename instead
of long_name. If there is no symsrc_filename, fallback to long_name.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding mem2node object to allow the easy lookup of the node for the
physical address.
It has following interface:
int mem2node__init(struct mem2node *map, struct perf_env *env);
void mem2node__exit(struct mem2node *map);
int mem2node__node(struct mem2node *map, u64 addr);
The mem2node__toolsinit initialize object from the perf data file
MEM_TOPOLOGY feature data. Following calls to mem2node__node will return
node number for given physical address. The mem2node__exit function
frees the object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Forgot to free env's memory nodes, adding needed code to perf_env__exit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.
The format of data in MEM_TOPOLOGY is as follows:
0 - version | for future changes
8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
16 - count | number of nodes
For each node we store map of physical indexes for
each node:
32 - node id | node index
40 - size | size of bitmap
48 - bitmap | bitmap of memory indexes that belongs to node
| /sys/devices/system/node/node<NODE>/memory<INDEX>
The MEM_TOPOLOGY could be displayed with following
report command:
$ perf report --header-only -I
...
# memory nodes (nr 1, block size 0x8000000):
# 0 [7G]: 0-23,32-69
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's passed along several hists entries in --hierarchy mode, so it's
better we keep track of it.
The current fail I see is that it gets removed in hierarchy --mem-mode
mode, where it's shared in the different hierarchies, but removed from
the template hist entry, so the report crashes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-6-jolsa@kernel.org
[ Rename mem_info__aloc() to mem_info__new(), to fix the typo and use the convention for constructors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display more header info from perf.data file, following values:
$ perf report -i perf.data --header-only
...
# header version : 1
# data offset : 424
# data size : 3364280
# feat offset : 3364704
It's handy for debuging.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the output header for reporting forced groups via --groups
option on non grouped events, like:
$ perf record -e 'cycles,instructions'
$ perf report --stdio --group
Before:
# Samples: 24 of event 'anon group { cycles:u, instructions:u }'
After:
# Samples: 24 of events 'cycles:u, instructions:u'
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: ad52b8cb48 ("perf report: Add support to display group output for non group events")
Link: http://lkml.kernel.org/r/20180307155020.32613-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' displays function call assembler instructions with a
right arrow. Hitting enter on this line/instruction causes the browser
to disassemble this target function and show it on the screen. On s390
this results in an error message 'The called function was not found.'
The function call assembly line parsing does not handle the s390 bras
and brasl instructions. Function call__parse expects the target as first
operand:
callq e9140 <__fxstat>
S390 has a register number as first operand:
brasl %r14,41d60 <abort>
Therefore the target addresses on s390 are always zero which is an
invalid address.
Introduce a s390 specific call parsing function which skips the first
operand on s390.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT code already has some preparation for AUX area sampling mode.
However the implementation has changed from the first proposal and one
of the side-effects is that it will not be impossible to support snapshot
mode and sampling mode at the same time.
Although there are no plans to support it, let validation (not yet
implemented) control whether it is allowed rather than low-level
functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_get_trace() fixes overlaps between the current buffer and the
previous buffer ('old_buffer').
However the previous buffer might not have had usable data (no PSB) so
the comparison must be made against the previous buffer that had usable
data.
Tidy that by keeping a pointer for that purpose in struct intel_pt_queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the new way sampling support will be implemented,
intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.
If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.
However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.
Suppress the estimate by setting timestamp_insn_cnt to zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.
The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.
That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments
to perf_mmap__read_init(). The data is stored in the struct perf_mmap.
Discard the parameters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument
to perf_mmap__read_event(). Discard them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite' argument to
perf_mmap__consume(). Discard it.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'overwrite' is set at allocation. It will not be changed. Using it
to replace the parameter of perf_mmap__consume(). The parameters will
be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the 'start', 'end' and 'overwrite' which are stored in
struct perf_mmap to replace the parameters of perf_mmap__read_event().
The parameters will be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the 'start' and 'end' which are stored in struct perf_mmap to
replace the temporary 'start' and 'end'.
The temporary variables will be discarded later.
It doesn't need to pass 'overwrite' to perf_mmap__push(). It's stored in
struct perf_mmap.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is too much boilerplate in the perf_mmap__read*() interfaces.
The 'start' and 'end' variables should be stored in struct perf_mmap at
initialization. They will be used later.
The old 'startp' and 'endp' pointers are used by perf_mmap__read_event()
now. They cannot be removed. So the old 'startp/endp' and new
'md->start/md->end' will exist simultaneously now. The old one will be
removed later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has been determined that the map is for overwrite mode
(evlist->overwrite_mmap) or non-overwrite mode (evlist->mmap) when
calling perf_evlist__alloc_mmap().
Store the information in struct perf_mmap, which will be used later to
simplify the perf_mmap__read*() interfaces.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce844 (perf stat: Only auto-merge events
that are PMU aliases).
Non-merging of legacy events is preserved:
$ perf stat -ag -e cache-misses,cache-misses sleep 1
Performance counter stats for 'system wide':
86,323 cache-misses
86,323 cache-misses
1.002623307 seconds time elapsed
But prefix or glob matching auto-merges the events created:
$ perf stat -a -e l3cache/read-miss/ sleep 1
Performance counter stats for 'system wide':
328 l3cache/read-miss/
1.002627008 seconds time elapsed
$ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1
Performance counter stats for 'system wide':
172 l3cache/read-miss/
1.002627008 seconds time elapsed
As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:
$ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
1.002622192 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To simplify creation of events accross multiple instances of the same
type of PMU stat supports two methods for creating multiple events from
a single event specification:
1. A prefix or glob can be used in the PMU name.
2. Aliases, which are listed immediately after the Kernel PMU events
by perf list, are used.
When the --no-merge option is passed and these events are displayed
individually the PMU name is lost and it's not possible to see which
count corresponds to which pmu:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
0.001675706 seconds time elapsed
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
12 l3cache_read_miss
17 l3cache_read_miss
10 l3cache_read_miss
8 l3cache_read_miss
0.001661305 seconds time elapsed
This change adds the original pmu name to the event. For dynamic pmu
events the pmu name is restored in the event name:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
63 l3cache_0_3/read-miss/
74 l3cache_0_1/read-miss/
64 l3cache_0_2/read-miss/
74 l3cache_0_0/read-miss/
0.001675706 seconds time elapsed
For alias events the name is added after the event name:
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
10 l3cache_read_miss [l3cache_0_3]
12 l3cache_read_miss [l3cache_0_1]
10 l3cache_read_miss [l3cache_0_2]
17 l3cache_read_miss [l3cache_0_0]
0.001661305 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I8056b9eda74bda33e95065056167ad96e97cb1fb
Link: http://lkml.kernel.org/r/1520345084-42646-3-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting on v4.12 event parsing code for dynamic pmu events already
supports prefix-based matching of multiple pmus when creating dynamic
events. E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
passing mypmu/<config>/ as an event spec will result in the creation of
the event in all of the pmus. This change expands this matching through
the use of fnmatch so glob-like expressions can be used to create events
in multiple pmus. E.g., in the system described above if a user only
wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/
can be passed.
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Change-Id: Icb25653fc5d5239c20f3bffdfdf4ab4c9c9bb20b
Link: http://lkml.kernel.org/r/1520454947-16977-1-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end, make
it return buffer_ptr instead of the caller.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename some buffer-queuing functions in preparation for supporting AUX area
sampling buffers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The usual thing is for a constructor to allocate space for its members,
not to require that the caller pass a pre-allocated 'name' and then, at
its destructor, to free something not allocated by it.
Fix it by making cgroup__new() to receive a const char pointer, then
allocate cgroup->name that then can continue to be freed at
cgroup__delete(), balancing the alloc/free operations inside the cgroup
struct methods.
This eases calling evlist__findnew_cgroup() from the custom 'perf trace'
cgroup parser, that will only call parse_cgroups() when the '-G cgroup'
is passed on the command line after '-e event' entries, when it'll
behave just like 'perf stat' and 'perf record', i.e. the previous
parse_cgroup() users that mandate that -G only can come after a -e.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4leugnuyqi10t98990o3xi1t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that tools like 'perf trace' can allow the user to set a cgroup
to be used for all the evsels still without a crgroup setup by
parse_cgroups(), such as the one to use for the syscalls, vfs_getname
and other events involved in strace like syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zf9jjsbj661r3lk6qb7g8j70@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to machine__findnew_thread(), etc, i.e. try to find, get a
refcount if found and return it, otherwise return a new cgroup object.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-im1omevlihhyneiic4nl3g24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread::shortname only used by sched command, so move it to sched
private structure.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520307457-23668-2-git-send-email-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
