Commit Graph

44 Commits

Author SHA1 Message Date
David Härdeman
4c7b355df6 [media] rc-core: Code cleanup after merging rc-sysfs and rc-map into rc-main
[mchehab@redhat.com: this patch were originally bundled with some renaming
stuff and with the file merges, as seen at:
https://patchwork.kernel.org/patch/291092/.

Instead of using the original approach, I wrote the rename patches and the
code merge as separate changes, then applied the difference on this patch.
This way, it is easier to see the real changes at the code, and will be easier
to merge upstream, especially if some conflict rises on the renaming patches]

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:37 -02:00
David Härdeman
3ffea4988b [media] ir-core: more cleanups of ir-functions.c
cx88 only depends on VIDEO_IR because it needs ir_extract_bits().
Move that function to ir-core.h and make it inline.

Lots of drivers had dependencies on VIDEO_IR when they really
wanted IR_CORE.

The only remaining drivers to depend on VIDEO_IR are bt8xx and
saa7134 (ir_rc5_timer_end is the only function exported by
ir-functions).

Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or
converting drivers to IR_CORE that they do not want a dependency
on IR_LEGACY.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:36 -02:00
David Härdeman
62c6503125 [media] ir-core: remove remaining users of the ir-functions keyhandlers
This patch removes the remaining usages of the ir_input_nokey() and
ir_input_keydown() functions provided by drivers/media/IR/ir-functions.c
by using the corresponding functionality in ir-core instead.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29 08:16:35 -02:00
Maxim Levitsky
4651918a4a [media] IR: extend ir_raw_event and do refactoring
Add new event types for timeout & carrier report
Move timeout handling from ir_raw_event_store_with_filter to
ir-lirc-codec, where it is really needed.
Now lirc bridge ensures proper gap handling.
Extend lirc bridge for carrier & timeout reports

Note: all new ir_raw_event variables now should be initialized
like that: DEFINE_IR_RAW_EVENT(ev);

To clean an existing event, use init_ir_raw_event(&ev);

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 10:59:47 -02:00
Jarod Wilson
ee08940531 V4L/DVB: IR: export ir_keyup so imon driver can use it directly
The imon driver currently reimplements its own version of ir_keyup
(along with key release timer functionality also already present in the
core IR code). A follow-up imon patch will make use of ir_keyup and the
IR stack's key release code.

Trivial extraction from David Härdeman's pending rc-core merge and
device interface abstraction patchset to facilitate merging a patch
based on his imon input dev split patch ahead of the larger churn, which
is slated for post-2.6.37-rc1 (after Dmitry's large keycode patches are
merged in mainline).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 01:06:07 -02:00
Maxim Levitsky
e589333f34 V4L/DVB: IR: extend interfaces to support more device settings
LIRC: add new IOCTL that enables learning mode (wide band receiver)
Still missing features: carrier report & timeout reports.
Will need to pack these into ir_raw_event

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08 23:43:00 -03:00
Maxim Levitsky
4a702ebf61 V4L/DVB: IR: add helper function for hardware with small o/b buffer
Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)

Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).

Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08 23:43:00 -03:00
Maxim Levitsky
b378f43fe9 V4L/DVB: IR: Allow not to compile keymaps in
Currently, ir device registration fails if keymap requested by driver is not found.
Fix that by always compiling in the empty keymap, and using it as a failback.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08 23:43:00 -03:00
Jarod Wilson
30eb1be718 V4L/DVB: IR TX: incoming IR buffer now an int pointer
incoming IR buffer now an int pointer, and not fed from userspace

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 15:17:28 -03:00
Jarod Wilson
9b7c54d926 V4L/DVB: IR: add tx callbacks to ir-core
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:56:07 -03:00
David Härdeman
e40b1127f9 V4L/DVB: ir-core: change duration to be coded as a u32 integer
This patch implements the agreed upon 1:31 integer encoded pulse/duration
struct for ir-core raw decoders. All decoders have been tested after the
change. Comments are welcome.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:57:42 -03:00
Jarod Wilson
1c0e0ee580 V4L/DVB: ir-core: make ir_g_keycode_from_table a public function
The imon driver I've previously submitted and have been porting to
use ir-core needs to use ir_g_keycode_from_table, as ir_keydown is
not sufficient, due to these things having really oddball hardware
decoders in them. This just moves the function declaration from
ir-core-priv.h over to ir-core.h.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:57:40 -03:00
Mauro Carvalho Chehab
3f113e3610 V4L/DVB: ir-core: move subsystem internal calls to ir-core-priv.h
ir-core.h has the kABI to be used by the bridge drivers, when needing to register
IR protocols and pass IR events. However, the same file also contains IR subsystem
internal calls, meant to be used inside ir-core and between ir-core and the raw
decoders.

Better to move those functions to an internal header, for some reasons:

1) Header will be a little more cleaner;

2) It avoids the need of recompile everything (bridge/hardware drivers, etc),
   just because a new decoder were added, or some other internal change were needed;

3) Better organize the ir-core API, splitting the functions that are internal to
   IR core and the ancillary drivers (decoders, lirc_dev) from the features that
   should be exported to IR subsystem clients.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:57:04 -03:00
David Härdeman
724e249550 V4L/DVB: Teach drivers/media/IR/ir-raw-event.c to use durations
drivers/media/IR/ir-raw-event.c is currently written with the assumption
that all "raw" hardware will generate events only on state change (i.e.
when a pulse or space starts).

However, some hardware (like mceusb, probably the most popular IR receiver
out there) only generates duration data (and that data is buffered so using
any kind of timing on the data is futile).

Furthermore, using signed int's to represent pulse/space durations is a
well-known approach when writing ir decoders.

With this patch:

- s64 int's are used to represent pulse/space durations in ns

- a workqueue is used to decode the ir protocols outside of interrupt context

- #defines are added to make decoders clearer

- decoder reset is implemented by passing a zero duration to the kfifo queue
  and decoders are updated accordingly

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:57:03 -03:00
Mauro Carvalho Chehab
626cf6979e V4L/DVB: ir-core: Distinguish sysfs attributes for in-hardware and raw decoders
Some devices have in-hardware Remote Controller decoder, while others
need a software decoder to get the IR code. As each software decoder
can be enabled/disabled individually, allowing multiple protocol
decoding capability.

On the other hand, hardware decoders have a limited protocol
support, often being able of decoding just one protocol each time.
So, each type needs a different set of capabilities to control the
supported protocol(s).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:57:02 -03:00
Mauro Carvalho Chehab
9dfe4e8339 V4L/DVB: ir-core: Add support for badly-implemented hardware decoders
A few hardware Remote Controller decoders, even using a standard protocol,
aren't able to provide the entire scancode. Due to that, the capability
of using other IR's are limited on those hardware.

Adds a way to indicate to ir-core what are the bits that the hardware
provides, from a scancode, allowing the addition of a complete IR table
to the kernel and allowing a limited support for changing the Remote
Controller on those devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:58 -03:00
Mauro Carvalho Chehab
4f9256b496 V4L/DVB: ir-core: move rc map code to rc-map.h
The keymaps don't need to be recompiled every time a change at ir-core.h
happens, since it only depends on rc-map defines. By moving those
definitions to the proper header, the code became cleaner, and avoids
needing to recompile all the RC maps every time a non-related change
is introduced.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:58 -03:00
Mauro Carvalho Chehab
587835a4b0 V4L-DVB: ir-core: remove the ancillary buffer
Now that the decoders are state machine, there's no need to create
an ancillary buffer while decoding the protocol. Just call the decoders
code directly, event by event.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:57 -03:00
Mauro Carvalho Chehab
db1423a6c7 V4L-DVB: ir-rc5-decoder: Add a decoder for RC-5 IR protocol
This decoder is also based on a state machine, just like the NEC protocol
decoder. It is pedantic in the sense that accepts only 14 bits. As there
are some variants that outputs less bits, it needs to be improved to also
handle those.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:56 -03:00
David Härdeman
a374fef443 V4L/DVB: ir-core: improve keyup/keydown logic
Rewrites the keyup/keydown logic in drivers/media/IR/ir-keytable.c.

All knowledge of keystates etc is now internal to ir-keytable.c
and not scattered around ir-raw-event.c and ir-nec-decoder.c (where
it doesn't belong).

In addition, I've changed the API slightly so that ir_input_dev is
passed as the first argument rather than input_dev. If we're ever
going to support multiple keytables we need to move towards making
ir_input_dev the main interface from a driver POV and obscure away
the input_dev as an implementational detail in ir-core.

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:54 -03:00
David Härdeman
b3074c0a3f V4L/DVB: drivers/media/IR - improve keytable code
The attached patch rewrites much of the keytable code in
drivers/media/IR/ir-keytable.c.

The scancodes are now inserted into the array in sorted
order which allows for a binary search on lookup.

The code has also been shrunk by about 150 lines.

In addition it fixes the following bugs:

Any use of ir_seek_table() was racy.

ir_dev->driver_name is leaked between ir_input_register() and
ir_input_unregister().

ir_setkeycode() unconditionally does clear_bit() on dev->keybit
when removing a mapping, but there might be another mapping with
a different scancode and the same keycode.

This version has been updated to incorporate patch feedback from
Mauro Carvalho Chehab.

[mchehab@redhat.com: Fix a conflict with RC keytable breakup patches and input changes]

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:53 -03:00
Mauro Carvalho Chehab
bd7261d3d7 V4L/DVB: ir-common: remove keymap tables from the module
Now that the remote keymaps were broken into separate modules,
get rid of the keycode tables that were hardcoded into ir-common.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:51 -03:00
Mauro Carvalho Chehab
02858eedcb V4L/DVB: ir-core: Make use of the new IR keymap modules
Instead of using the ugly keymap sequences, use the new rc-*.ko keymap
files. For now, it is still needed to have one keymap loaded, for the
RC code to work. Later patches will remove this depenency.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:50 -03:00
Mauro Carvalho Chehab
b2245ba164 V4L/DVB: ir: prepare IR code for a parameter change at register function
A latter patch will reuse the ir_input_register with a different meaning.
Before it, change all occurrences to a temporary name.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:50 -03:00
Mauro Carvalho Chehab
9ce50c1a5f V4L/DVB: ir-core: Add support for RC map code register
Instead of having all RC tables hardcoded on one file with
all tables there, add infrastructure for registering and dynamically
load the table(s) when needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:49 -03:00
Mauro Carvalho Chehab
77b7422d48 V4L/DVB: ir-common: move IR tables from ir-keymaps.c to a separate file
Instead of having one big file with lots of keytables, create one include
file for each IR keymap.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19 12:56:48 -03:00
Mauro Carvalho Chehab
716aab44df V4L/DVB: ir-core: Add callbacks for input/evdev open/close on IR core
Especially when IR needs to do polling, it generates lots of wakeups per
second. This makes no sense, if the input event device is closed.

Adds a callback handler to the IR hardware driver, to allow registering
an open/close ops.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:53:03 -03:00
Mauro Carvalho Chehab
93c312ff21 V4L/DVB: ir-core: prepare to add more operations for ir decoders
Some decoders and a lirc_dev interface may need some other operations to work.
For example: IR device register/unregister and ir_keydown events may need to
be tracked.

As some operations can occur in interrupt time, and a lock is needed to prevent
un-registering a decode while decoding a key, the lock needed to be convert
into a spin lock.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:53:00 -03:00
Mauro Carvalho Chehab
995187bed3 V4L/DVB: ir-core: dynamically load the compiled IR protocols
Instead of hardcoding the protocols into ir-core, add a register interface
for the IR protocol decoders, and convert ir-nec-decoder into a client of
ir-core.

With this approach, it is possible to dynamically load the needed IR protocols,
and to add a RAW IR interface module, registered as one IR raw protocol decoder.

This patch opens a way to register a lirc_dev interface to work as an userspace
IR protocol decoder.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:52:59 -03:00
Mauro Carvalho Chehab
9f1547829a V4L/DVB: saa7134: don't wait too much to generate an IR event on raw_decode
At raw_decode mode, the key is processed after the end of a timer. The
previous code resets the timer every time something is received at the IR
port. While this works fine with IR's that don't implement repeat, like
Avermedia RM-JX IR, it keeps waiting until keydown, on IR's that implement
NEC repeat command, like the Terratec yellow.

The solution is to change the behaviour to do the timeout after the first
received data.

The timeout is currently set to 15 ms, as it works fine with NEC protcocol.
It may need some adjustments to support other protocols and to better handle
spurious detections that may happen with some IR sensors.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:52:58 -03:00
Mauro Carvalho Chehab
ada39630c7 V4L/DVB: ir-core/saa7134: Move ir keyup/keydown code to the ir-core
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:52:57 -03:00
Mauro Carvalho Chehab
6660de568d V4L/DVB: ir-core: add two functions to report keyup/keydown events
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:52:56 -03:00
Mauro Carvalho Chehab
a3572c34da V4L/DVB: ir-core: Add logic to decode IR protocols at the IR core
Adds a method to pass IR raw pulse/code events into ir-core. This is
needed in order to support LIRC. It also helps to move common code
from the drivers into the core.

In order to allow testing, it implements a simple NEC protocol decoder
at ir-nec-decoder.c file. The logic is about the same used at saa7134
driver that handles Avermedia M135A and Encore FM53 boards.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:52:56 -03:00
Mauro Carvalho Chehab
727e625cc2 V4L/DVB: ir-core: export driver name used by IR via uevent
Now, both driver and keytable names are exported to userspace. This
will help userspace to decide when a table need to be replaced
by another one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:47:05 -03:00
Mauro Carvalho Chehab
2915e5ef35 V4L/DVB: ir-core: Add a macro to properly create IR tables
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:47:04 -03:00
Mauro Carvalho Chehab
945cdfa2c9 V4L/DVB: ir: use a real device instead of a virtual class
Change the ir-sysfs approach to create irrcv0 as a device, instead of
using class_dev. Also, change the way input is registered, in order
to make its parent to be the irrcv device.

Due to this change, now the event device is created under
/sys/class/ir/irrcv class:

/sys/class/irrcv/irrcv0/
|-- current_protocol
|-- device -> ../../../1-3
|-- input9
|   |-- capabilities
|   |   |-- abs
...

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18 00:47:03 -03:00
Mauro Carvalho Chehab
8719cfdb4a V4L/DVB (13833): ir-core: some functions can be static
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:25 -03:00
Mauro Carvalho Chehab
971e8298de V4L/DVB (13680): ir: use unsigned long instead of enum
When preparing the linux-next patches, I got those errors:

include/media/ir-core.h:29: warning: left shift count >= width of type
In file included from include/media/ir-common.h:29,
                 from drivers/media/video/ir-kbd-i2c.c:50:
drivers/media/video/ir-kbd-i2c.c: In function ‘ir_probe’:
drivers/media/video/ir-kbd-i2c.c:324: warning: left shift count >= width of type

Unfortunately, enum is 32 bits on i386. As we define IR_TYPE_OTHER as 1<<63,
it won't work on non 64 bits arch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:24 -03:00
Mauro Carvalho Chehab
53f870228d V4L/DVB (13635): ir-core: Implement protocol table type reading
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:23 -03:00
Mauro Carvalho Chehab
e93854da88 V4L/DVB (13634): ir-core: allow passing IR device parameters to ir-core
Adds an structure to ir_input_register to contain IR device characteristics,
like supported protocols and a callback to handle protocol event changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:23 -03:00
Mauro Carvalho Chehab
4714eda877 V4L/DVB (13633): ir-core: create a new class for remote controllers
Add sysfs skeleton to export remote controller information via
/sys/class/irrcv.

For now, the code doesn't do much. It just exports an attribute that
is meant to  report and control the IR protocol used by the keytable.
However, the callbacks for this new attribute weren't set yet.

Also, it lacks symlinks to the used event interface.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:23 -03:00
Mauro Carvalho Chehab
38ef6aa884 V4L/DVB (13616): IR: rename ir_input_free as ir_input_unregister
Now, ir_input_free does more than just freeing the keytab. Better to
rename it as ir_input_unregister.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:44 -02:00
Mauro Carvalho Chehab
75543cce0c V4L/DVB (13615): ir-core: create ir_input_register
Move non-V4L specific stuff from ir-functions ir_input_init() into
a new function to register ir devices: ir_input_register().

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:44 -02:00
Mauro Carvalho Chehab
446e4a64d2 V4L/DVB (13613): IR: create ir-core module
Split the ir-common into two separate modules:
	- ir-core: it is the IR-independent functions;
	- ir-common: has the common part used by V4L drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 00:18:42 -02:00