Commit Graph

14 Commits

Author SHA1 Message Date
Baolin Wang
f9adf61e98
spi: sprd: adi: Change hwlock to be optional
Now Spreadtrum ADI controller supplies multiple master accessing channel
to support multiple subsystems accessing, instead of using a hardware
spinlock to synchronize between the multiple subsystems.

To keep backward compatibility, we should change the hardware spinlock
to be optional. Moreover change to use of_hwspin_lock_get_id() function
which return -ENOENT error number to indicate no hwlock support.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/2abe7dcf210e4197f8c5ece7fc6d6cc1eda8c655.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 12:24:47 +01:00
Sherry Zong
e6d722ca09
spi: sprd: adi: Add a reset reason for watchdog mode
When the system was rebooted by watchdog, now we did not save the watchdog
reset mode which will make system enter a incorrect mode after rebooting.

Thus we should set the watchdog reset mode as default when opening the
watchdog configuration, that means if the system was rebooted by other
reason through the restart_handler(), then we will clear the default
watchdog reset mode to save the correct reset mode.

Signed-off-by: Sherry Zong <sherry.zong@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/1563f3de43c6c2262d597a25d6138b5de61ea23d.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 12:24:28 +01:00
Sherry Zong
9d9aa1cc91
spi: sprd: adi: Add a reset reason for factory test mode
Add a new reset flag to indicate that the system need enter factory test
mode after restarting system.

Signed-off-by: Sherry Zong <sherry.zong@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/8ae5651e876b527920ff878721a8a8ef47b099ac.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 12:24:09 +01:00
Chenxu Wei
cc6b3431b3
spi: sprd: adi: Add a reset reason for TOS panic
Add a new reset flag to indicate the reset reason is caused by TOS.

Signed-off-by: Chenxu Wei <weicx@spreadst.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/97583aad1f2b849d69b4e76e8d29113da72a9fff.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 12:23:50 +01:00
Baolin Wang
c627c58acd
spi: sprd: adi: Remove redundant address bits setting
The ADI default transfer address bits is 12bit on Spreadtrum SC9860
platform, thus there is no need to set again, remove it.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/3cb57b8aadb7747a9f833e9b4fe8596ba738d9f6.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-26 12:23:31 +01:00
Baolin Wang
c8d0498967 spi: sprd: Change to use devm_hwspin_lock_request_specific()
Change to use devm_hwspin_lock_request_specific() instead of
freeing the hwlock explicitly when unbound the device.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26 13:52:27 -07:00
Baolin Wang
d4942c119c spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
Now the hwlock core has supplied new function to get a specific hwlock id
by one hwlock name, which is more clear for users. So change to use
of_hwspin_lock_get_id_byname().

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-26 13:52:08 -07:00
Baolin Wang
ac17750120
spi: sprd: Add the support of restarting the system
On Spreadtrum platform, we use one PMIC watchdog to reset the whole system
with loading one suitable timeout value (usually 50ms) for the watchdog.

In theory, we should implement the restart function in drivers/power/reset
subsystem to access the PMIC watchdog with regmap. When restart the system,
other cores will be stopped by IPI, but if other cores were accessing PMIC
with holding the regmap mutex lock, that will cause dead-lock issue if we
try to access the PMIC watchdog with regmap to restart the whole system.
Thus we can implement the restart function in ADI driver to avoid this
issue.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-21 09:55:19 +08:00
Baolin Wang
a61aa68365
spi: sprd: Simplify the transfer function
We can move the hardware spinlock protection into the ADI read/write
functions to simplify the sprd_adi_transfer_one() function. Moreover
this optimization can also help to access PMIC without considering
the hardware spinlock using sprd_adi_read/write() functions.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-21 09:49:26 +08:00
Baolin Wang
54e2fc28d9 spi: sprd: Fix the possible negative value of BIT()
When enabling the ADI hardware channels, if the channel id is 31,
then we will get one negative value -1 for BIT() macro, which will
write incorrect value to register.

Fixes: 7e2903cb91 ("spi: Add ADI driver for Spreadtrum platform")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-25 14:00:03 +02:00
Wu Fengguang
8955b26d22 spi: sprd-adi: fix platform_no_drv_owner.cocci warnings
drivers/spi/spi-sprd-adi.c:409:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: 7e2903cb91 ("spi: Add ADI driver for Spreadtrum platform")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 22:15:50 +01:00
Dan Carpenter
b0d6e097b9 spi: sprd-adi: silence an uninitialized variable warning
If of_get_property() fails then "size" is uninitialized and it leads to
a static checker warning:

    drivers/spi/spi-sprd-adi.c:288 sprd_adi_hw_init()
    error: uninitialized symbol 'size'.

We can silence the warning by re-arranging the order of these checks.
It obviously doesn't affect runtime at all.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-25 17:09:44 +01:00
Dan Carpenter
04063a011f spi: sprd-adi: checking for NULL instead of IS_ERR()
devm_ioremap_resource() returns error pointers, it never returns NULL.

Fixes: 7e2903cb91 ("spi: Add ADI driver for Spreadtrum platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-25 17:08:20 +01:00
Baolin Wang
7e2903cb91 spi: Add ADI driver for Spreadtrum platform
This patch adds ADI driver based on SPI framework for
Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19 12:53:29 +01:00