Now that we already have kvm and the VCPU id set for the VCPU, we can
convert sda_add_vcpu to look much more like sda_del_vcpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's always set and clear the sda when enabling/disabling a VCPU.
Dealing with sda being set to something else makes no sense anymore
as we enable a VCPU in the SCA now after it has been registered at
the VM.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If something goes wrong in kvm_arch_vcpu_create, the VCPU has already
been added to the sca but will never be removed. Trying to create VCPUs
with duplicate ids (e.g. after a failed attempt) is problematic.
Also, when creating multiple VCPUs in parallel, we could theoretically
forget to set the correct SCA when the switch to ESCA happens just
before the VCPU is registered.
Let's add the VCPU to the SCA in kvm_arch_vcpu_postcreate, where we can
be sure that no duplicate VCPU with the same id is around and the VCPU
has already been registered at the VM. We also have to make sure to update
ECB at that point.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Having no sca can never happen, even when something goes wrong when
switching to ESCA. Otherwise we would have a serious bug.
Let's remove this superfluous check.
Acked-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending,
so we can directly avoid taking the lock.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch allows s390 to have more than 64 VCPUs for a guest (up to
248 for memory usage considerations), if supported by the underlaying
hardware (sclp.has_esca).
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds code that performs transparent switch to Extended
SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too.
The entier ESCA functionality, however, is still not enabled.
The enablement will be provided in a separate patch.
This patch also uses read/write lock protection of SCA and its subfields for
possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such
a protection (for the swap), any SCA access is now guarded.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch updates the routines (sca_*) to provide transparent access
to and manipulation on the data for both Basic and Extended SCA in use.
The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases.
Also the kvm.arch.use_esca flag is provided.
The actual functionality is kept the same.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds new structures and updates some existing ones to
provide the base for Extended SCA functionality.
The old sca_* structures were renamed to bsca_* to keep things uniform.
The access to fields of SIGP controls were turned into bitfields instead
of hardcoded bitmasks.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch provides SCA-aware helpers to create/delete a VCPU.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch generalizes access to the SIGP controls, which is a part of SCA.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch generalizes access to the IPTE controls, which is a part of SCA.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's rewrite this function to better reflect how we actually handle
exit_code. By dropping out early we can save a few cycles. This
especially speeds up sie exits caused by host irqs.
Also, let's move the special -EOPNOTSUPP for intercepts to
the place where it belongs and convert it to -EREMOTE.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's reuse the new common function for VPCU lookup by id.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out the new function into a separate patch]
Replace the offsets based on the struct area_area with the offset
constants from asm-offsets.c based on the struct _lowcore.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For now, VCPUs were always created sequentially with incrementing
VCPU ids. Therefore, the index in the VCPUs array matched the id.
As sequential creation might change with cpu hotplug, let's use
the correct lookup function to find a VCPU by id, not array index.
Let's also use kvm_lookup_vcpu() for validation of the sending VCPU
on external call injection.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # db27a7a KVM: Provide function for VCPU lookup by id
Commit 383d0b0501 ("KVM: s390: handle pending local interrupts via
bitmap") introduced a possible memory overwrite from user space.
User space could pass an invalid emergency signal code (sending VCPU)
and therefore exceed the bitmap. Let's take care of this case and
check that the id is in the valid range.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v3.19+ db27a7a KVM: Provide function for VCPU lookup by id
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pfmf intercept handler should check if the EDAT 1 facility
is installed in the guest, not if it is installed in the host.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should never allow to enable/disable any facilities for the guest
when other VCPUs were already created.
kvm_arch_vcpu_(load|put) relies on SIMD not changing during runtime.
If somebody would create and run VCPUs and then decides to enable
SIMD, undefined behaviour could be possible (e.g. vector save area
not being set up).
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.1+
handling.
PPC: Mostly bug fixes.
ARM: No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite for
IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86: quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new component (in
virt/lib/) that connects VFIO and KVM together. The same infrastructure
will be used for ARM interrupt forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic interrupt
controller will have to wait for 4.5. These will let KVM expose Hyper-V
devices.
- nested virtualization now supports VPID (same as PCID but for vCPUs)
which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for clflushopt,
clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel + IOAPIC/PIC/PIT in
userspace, which reduces the attack surface of the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten to not
require help from the hypervisor.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWO2IQAAoJEL/70l94x66D/K0H/3AovAgYmJQToZlimsktMk6a
f2xhdIqfU5lIQQh5uNBCfL3o9o8H9Py1ym7aEw3fmztPHHJYc91oTatt2UEKhmEw
VtZHp/dFHt3hwaIdXmjRPEXiYctraKCyrhaUYdWmUYkoKi7lW5OL5h+S7frG2U6u
p/hFKnHRZfXHr6NSgIqvYkKqtnc+C0FWY696IZMzgCksOO8jB1xrxoSN3tANW3oJ
PDV+4og0fN/Fr1capJUFEc/fejREHneANvlKrLaa8ht0qJQutoczNADUiSFLcMPG
iHljXeDsv5eyjMtUuIL8+MPzcrIt/y4rY41ZPiKggxULrXc6H+JJL/e/zThZpXc=
=iv2z
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.4.
s390:
A bunch of fixes and optimizations for interrupt and time handling.
PPC:
Mostly bug fixes.
ARM:
No big features, but many small fixes and prerequisites including:
- a number of fixes for the arch-timer
- introducing proper level-triggered semantics for the arch-timers
- a series of patches to synchronously halt a guest (prerequisite
for IRQ forwarding)
- some tracepoint improvements
- a tweak for the EL2 panic handlers
- some more VGIC cleanups getting rid of redundant state
x86:
Quite a few changes:
- support for VT-d posted interrupts (i.e. PCI devices can inject
interrupts directly into vCPUs). This introduces a new
component (in virt/lib/) that connects VFIO and KVM together.
The same infrastructure will be used for ARM interrupt
forwarding as well.
- more Hyper-V features, though the main one Hyper-V synthetic
interrupt controller will have to wait for 4.5. These will let
KVM expose Hyper-V devices.
- nested virtualization now supports VPID (same as PCID but for
vCPUs) which makes it quite a bit faster
- for future hardware that supports NVDIMM, there is support for
clflushopt, clwb, pcommit
- support for "split irqchip", i.e. LAPIC in kernel +
IOAPIC/PIC/PIT in userspace, which reduces the attack surface of
the hypervisor
- obligatory smattering of SMM fixes
- on the guest side, stable scheduler clock support was rewritten
to not require help from the hypervisor"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (123 commits)
KVM: VMX: Fix commit which broke PML
KVM: x86: obey KVM_X86_QUIRK_CD_NW_CLEARED in kvm_set_cr0()
KVM: x86: allow RSM from 64-bit mode
KVM: VMX: fix SMEP and SMAP without EPT
KVM: x86: move kvm_set_irq_inatomic to legacy device assignment
KVM: device assignment: remove pointless #ifdefs
KVM: x86: merge kvm_arch_set_irq with kvm_set_msi_inatomic
KVM: x86: zero apic_arb_prio on reset
drivers/hv: share Hyper-V SynIC constants with userspace
KVM: x86: handle SMBASE as physical address in RSM
KVM: x86: add read_phys to x86_emulate_ops
KVM: x86: removing unused variable
KVM: don't pointlessly leave KVM_COMPAT=y in non-KVM configs
KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr()
KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings
KVM: arm/arm64: Optimize away redundant LR tracking
KVM: s390: use simple switch statement as multiplexer
KVM: s390: drop useless newline in debugging data
KVM: s390: SCA must not cross page boundaries
KVM: arm: Do not indent the arguments of DECLARE_BITMAP
...
We currently do some magic shifting (by exploiting that exit codes
are always a multiple of 4) and a table lookup to jump into the
exit handlers. This causes some calculations and checks, just to
do an potentially expensive function call.
Changing that to a switch statement gives the compiler the chance
to inline and dynamically decide between jump tables or inline
compare and branches. In addition it makes the code more readable.
bloat-o-meter gives me a small reduction in code size:
add/remove: 0/7 grow/shrink: 1/1 up/down: 986/-1334 (-348)
function old new delta
kvm_handle_sie_intercept 72 1058 +986
handle_prog 704 696 -8
handle_noop 54 - -54
handle_partial_execution 60 - -60
intercept_funcs 120 - -120
handle_instruction 198 - -198
handle_validity 210 - -210
handle_stop 316 - -316
handle_external_interrupt 368 - -368
Right now my gcc does conditional branches instead of jump tables.
The inlining seems to give us enough cycles as some micro-benchmarking
shows minimal improvements, but still in noise.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
the s390 debug feature does not need newlines. In fact it will
result in empty lines. Get rid of 4 leftovers.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We seemed to have missed a few corner cases in commit f6c137ff00
("KVM: s390: randomize sca address").
The SCA has a maximum size of 2112 bytes. By setting the sca_offset to
some unlucky numbers, we exceed the page.
0x7c0 (1984) -> Fits exactly
0x7d0 (2000) -> 16 bytes out
0x7e0 (2016) -> 32 bytes out
0x7f0 (2032) -> 48 bytes out
One VCPU entry is 32 bytes long.
For the last two cases, we actually write data to the other page.
1. The address of the VCPU.
2. Injection/delivery/clearing of SIGP externall calls via SIGP IF.
Especially the 2. happens regularly. So this could produce two problems:
1. The guest losing/getting external calls.
2. Random memory overwrites in the host.
So this problem happens on every 127 + 128 created VM with 64 VCPUs.
Cc: stable@vger.kernel.org # v3.15+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the kernel detects that the s390 hardware supports the vector
facility, it is enabled by default at an early stage. To force
it off, use the novx kernel parameter. Note that there is a small
time window, where the vector facility is enabled before it is
forced to be off.
With enabling the vector facility by default, the FPU save and
restore functions can be improved. They do not longer require
to manage expensive control register updates to enable or disable
the vector enablement control for particular processes.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's factor this out and always use get_tod_clock_fast() when
reading the guest TOD.
STORE CLOCK FAST does not do serialization and, therefore, might
result in some fuzziness between different processors in a way
that subsequent calls on different CPUs might have time stamps that
are earlier. This semantics is fine though for all KVM use cases.
To make it obvious that the new function has STORE CLOCK FAST
semantics we name it kvm_s390_get_tod_clock_fast.
With this patch, we only have a handful of places were we
have to care about STP sync (using preempt_disable() logic).
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's move that whole logic into one function. We now always use unsigned
values when calculating the epoch (to avoid over/underflow defined).
Also, we always have to get all VCPUs out of SIE before doing the update
to avoid running differing VCPUs with different TODs.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Nobody except early.c makes use of store_tod_clock() to handle the
cc. So if we would get a cc != 0, we would be in more trouble.
Let's replace all users with get_tod_clock(). Returning a cc
on an ioctl sounded strange either way.
We can now also easily move the get_tod_clock() call into the
preempt_disable() section. This is in fact necessary to make the
STP sync work as expected. Otherwise the host TOD could change
and we would end up with a wrong epoch calculation.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
PER events can always co-exist with other program interrupts.
For now, we always overwrite all program interrupt parameters when
injecting any type of program interrupt.
Let's handle that correctly by only overwriting the relevant portion of
the program interrupt parameters. Therefore we can now inject PER events
and ordinary program interrupts concurrently, resulting in no loss of
program interrupts. This will especially by helpful when manually detecting
PER events later - as both types might be triggered during one SIE exit.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The main reason to keep program injection in kernel separated until now
was that we were able to do some checking, if really only the owning
thread injects program interrupts (via waitqueue_active(li->wq)).
This BUG_ON was never triggered and the chances of really hitting it, if
another thread injected a program irq to another vcpu, were very small.
Let's drop this check and turn kvm_s390_inject_program_int() and
kvm_s390_inject_prog_irq() into simple inline functions that makes use of
kvm_s390_inject_vcpu().
__must_check can be dropped as they are implicitely given by
kvm_s390_inject_vcpu(), to avoid ugly long function prototypes.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's get rid of the local variable and exit directly if we found
any pending interrupt. This is not only faster, but also better
readable.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We can remove that double check.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
No need to separate pending and floating irqs when setting interception
requests. Let's do it for all equally.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We don't care about program event recording irqs (synchronous
program irqs) but asynchronous irqs when checking for disabled
wait. Machine checks were missing.
Let's directly switch to the functions we have for that purpose
instead of testing once again for magic bits.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
the float int structure is no longer used in __inject_vm.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The offending commit accidentally replaces an atomic_clear with an
atomic_or instead of an atomic_andnot in kvm_s390_vcpu_request_handled.
The symptom is that kvm guests on s390 hang on startup.
This patch simply replaces the incorrect atomic_or with atomic_andnot
Fixes: 805de8f43c (atomic: Replace atomic_{set,clear}_mask() usage)
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new statistic can help diagnosing VCPUs that, for any reason,
trigger bad behavior of halt_poll_ns autotuning.
For example, say halt_poll_ns = 480000, and wakeups are spaced exactly
like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes
10+20+40+80+160+320+480 = 1110 microseconds out of every
479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then
is consuming about 30% more CPU than it would use without
polling. This would show as an abnormally high number of
attempted polling compared to the successful polls.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com<
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull s390 updates from Martin Schwidefsky:
"The big one is support for fake NUMA, splitting a really large machine
in more manageable piece improves performance in some cases, e.g. for
a KVM host.
The FICON Link Incident handling has been improved, this helps the
operator to identify degraded or non-operational FICON connections.
The save and restore of floating point and vector registers has been
overhauled to allow the future use of vector registers in the kernel.
A few small enhancement, magic sys-requests for the vt220 console via
SCLP, some more assembler code has been converted to C, the PCI error
handling is improved.
And the usual cleanup and bug fixing"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
s390/jump_label: Use %*ph to print small buffers
s390/sclp_vt220: support magic sysrequests
s390/ctrlchar: improve handling of magic sysrequests
s390/numa: remove superfluous ARCH_WANT defines
s390/3270: redraw screen on unsolicited device end
s390/dcssblk: correct out of bounds array indexes
s390/mm: simplify page table alloc/free code
s390/pci: move debug messages to debugfs
s390/nmi: initialize control register 0 earlier
s390/zcrypt: use msleep() instead of mdelay()
s390/hmcdrv: fix interrupt registration
s390/setup: fix novx parameter
s390/uaccess: remove uaccess_primary kernel parameter
s390: remove unneeded sizeof(void *) comparisons
s390/facilities: remove transactional-execution bits
s390/numa: re-add DIE sched_domain_topology_level
s390/dasd: enhance CUIR scope detection
s390/dasd: fix failing path verification
s390/vdso: emit a GNU hash
s390/numa: make core to node mapping data dynamic
...
s390: timekeeping changes, cleanups and fixes
x86: support for Hyper-V MSRs to report crashes, and a bunch of cleanups.
One interesting feature that was planned for 4.3 (emulating the local
APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to
be delayed because Intel complained about my reading of the manual.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVznW4AAoJEL/70l94x66Dt+gH/3vydhh6kv+mKhnR+kADaGfM
gaunw0CUpJLU6gkOkYOm5M32WGhsT9Hd3WtRTJO6PhSo7cQ88hMx24u4XAffoewo
Os5tDwAaHeV2enVSTri6xX8e2F2mgPDghGcYJPUBwnmMjRzZ8tj2VHUcbxqVT6Pb
pX3V8ZxOZ81+ACZU2tdNRzLUd2H1v4d74gtVS7ove1Vb0CvPOBdHf1KQuUCUa2Pi
73fvnaEuSaFYtSWZIP1PYxLnsQHpApH3Kco/5kHeqUPpYaGa/g2bnfncHRw20Svr
gb3opwbfyiq91xfGbRVR3+E63Cw4G6aTl5MDNv9UFJ+xFKuj8WJ72xXXTSwzUi4=
=HgT+
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"A very small release for x86 and s390 KVM.
- s390: timekeeping changes, cleanups and fixes
- x86: support for Hyper-V MSRs to report crashes, and a bunch of
cleanups.
One interesting feature that was planned for 4.3 (emulating the local
APIC in kernel while keeping the IOAPIC and 8254 in userspace) had to
be delayed because Intel complained about my reading of the manual"
* tag 'kvm-4.3-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
x86/kvm: Rename VMX's segment access rights defines
KVM: x86/vPMU: Fix unnecessary signed extension for AMD PERFCTRn
kvm: x86: Fix error handling in the function kvm_lapic_sync_from_vapic
KVM: s390: Fix assumption that kvm_set_irq_routing is always run successfully
KVM: VMX: drop ept misconfig check
KVM: MMU: fully check zero bits for sptes
KVM: MMU: introduce is_shadow_zero_bits_set()
KVM: MMU: introduce the framework to check zero bits on sptes
KVM: MMU: split reset_rsvds_bits_mask_ept
KVM: MMU: split reset_rsvds_bits_mask
KVM: MMU: introduce rsvd_bits_validate
KVM: MMU: move FNAME(is_rsvd_bits_set) to mmu.c
KVM: MMU: fix validation of mmio page fault
KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
KVM: s390: host STP toleration for VMs
KVM: x86: clean/fix memory barriers in irqchip_in_kernel
KVM: document memory barriers for kvm->vcpus/kvm->online_vcpus
KVM: x86: remove unnecessary memory barriers for shared MSRs
KVM: move code related to KVM_SET_BOOT_CPU_ID to x86
KVM: s390: log capability enablement and vm attribute changes
...
This fixes the assumption that kvm_set_irq_routing is always run
successfully by instead making it equal to the variable r which
we use for returning in the function kvm_arch_vm_ioctl instead
of making r equal to zero when calling this particular function
and incorrectly making the caller of kvm_arch_vm_ioctl think
the function has run successfully.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Message-Id: <1438880754-27149-1-git-send-email-xerofoify@gmail.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the host has STP enabled, the TOD of the host will be changed during
synchronization phases. These are performed during a stop_machine() call.
As the guest TOD is based on the host TOD, we have to make sure that:
- no VCPU is in the SIE (implicitly guaranteed via stop_machine())
- manual guest TOD calculations are not affected
"Epoch" is the guest TOD clock delta to the host TOD clock. We have to
adjust that value during the STP synchronization and make sure that code
that accesses the epoch won't get interrupted in between (via disabling
preemption).
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All calls to save_fpu_regs() specify the fpu structure of the current task
pointer as parameter. The task pointer of the current task can also be
retrieved from the CPU lowcore directly. Remove the parameter definition,
load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU
structure onto the task structure. Apply the same approach for the
load_fpu_regs() function.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
commit 785dbef407 ("KVM: s390: optimize round trip time in request
handling") introduced a regression. This regression was seen with
CPU hotplug in the guest and switching between 1 or 2 CPUs. This will
set/reset the IBS control via synced request.
Whenever we make a synced request, we first set the vcpu->requests
bit and then block the vcpu. The handler, on the other hand, unblocks
itself, processes vcpu->requests (by clearing them) and unblocks itself
once again.
Now, if the requester sleeps between setting of vcpu->requests and
blocking, the handler will clear the vcpu->requests bit and try to
unblock itself (although no bit is set). When the requester wakes up,
it blocks the VCPU and we have a blocked VCPU without requests.
Solution is to always unset the block bit.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Fixes: 785dbef407 ("KVM: s390: optimize round trip time in request handling")
Depending on user space, some capabilities and vm attributes are
enabled at runtime. Let's log those events and while we're at it,
log querying the vm attributes as well.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In addition to the per VM debug logs, let's provide a global
one for KVM-wide events, like new guests or fatal errors.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Use the default log level 3 for state changing and/or seldom events,
use 4 for others. Also change some numbers from %x to %d and vice versa
to match documentation. If hex, let's prepend the numbers with 0x.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We do not use the exception logger, so the 2nd area is unused.
Just have one area that is bigger (32 pages).
At the same time we can limit the debug feature size to 7
longs, as the largest user has 3 parameters + string + boiler
plate (vCPU, PSW mask, PSW addr)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds names for missing irq types to the trace events.
In order to identify adapter irqs, the define is moved from
interrupt.c to the other basic irq defines in uapi/linux/kvm.h.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This reworks the debug logging for interrupt related logs.
Several changes:
- unify program int/irq
- improve decoding (e.g. use mcic instead of parm64 for machine
check injection)
- remove useless interrupt type number (the name is enough)
- rename "interrupt:" to "deliver:" as the other side is called "inject"
- use log level 3 for state changing and/or seldom events (like machine
checks, restart..)
- use log level 4 for frequent events
- use 0x prefix for hex numbers
- add pfault done logging
- move some tracing outside spinlock
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
We're not only interested in the address of the control block, but
also in the requested subcommand and for the token subcommand, in the
specified token address and masks.
Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
The "from user"/"from kernel" part of the log/trace messages is not
always correct anymore and therefore not really helpful.
Let's remove that part from the log + trace messages. For program
interrupts, we can now move the logging/tracing part into the real
injection function, as already done for the other injection functions.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
SPX (SET PREFIX) and SIGP (Set prefix) can change the prefix
register of a CPU. As sigp set prefix may be handled in user
space (KVM_CAP_S390_USER_SIGP), we would not log the changes
triggered via SIGP in that case. Let's have just one VCPU_EVENT
at the central location that tracks prefix changes.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Let's add a vcpu event for the page reference handling and change
the default debugging level for the ipl diagnose. Both are not
frequent AND change the global state, so lets log them always.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Sometimes kvm stat counters are the only performance metric to check
after something went wrong. Let's add additional counters for some
diagnoses.
In addition do the count for diag 10 all the time, even if we inject
a program interrupt.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
There is no point in resetting the CMMA state if it was never enabled.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As we already only enable CMMA when userspace requests it, we can
safely move the additional checks to the request handler and avoid
doing them multiple times. This also tells userspace if CMMA is
available.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When guest debugging is active, space-switch events might be enforced
by PER. While the PER events are correctly filtered out,
space-switch-events could be forwarded to the guest, although from a
guest point of view, they should not have been reported.
Therefore we have to filter out space-switch events being concurrently
reported with a PER event, if the PER event got filtered out. To do so,
we theoretically have to know which instruction was responsible for the
event. As the applicable instructions modify the PSW address, the
address space set in the PSW and even the address space in cr1, we
can't figure out the instruction that way.
For this reason, we have to rely on the information about the old and
new address space, in order to guess the responsible instruction type
and do appropriate checks for space-switch events.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As enabling storage keys might fail, we should forward the error.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Replace the deprecated atomic_{set,clear}_mask() usage with the now
ubiquous atomic_{or,andnot}() functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Improve the save and restore behavior of FPU register contents to use the
vector extension within the kernel.
The kernel does not use floating-point or vector registers and, therefore,
saving and restoring the FPU register contents are performed for handling
signals or switching processes only. To prepare for using vector
instructions and vector registers within the kernel, enhance the save
behavior and implement a lazy restore at return to user space from a
system call or interrupt.
To implement the lazy restore, the save_fpu_regs() sets a CPU information
flag, CIF_FPU, to indicate that the FPU registers must be restored.
Saving and setting CIF_FPU is performed in an atomic fashion to be
interrupt-safe. When the kernel wants to use the vector extension or
wants to change the FPU register state for a task during signal handling,
the save_fpu_regs() must be called first. The CIF_FPU flag is also set at
process switch. At return to user space, the FPU state is restored. In
particular, the FPU state includes the floating-point or vector register
contents, as well as, vector-enablement and floating-point control. The
FPU state restore and clearing CIF_FPU is also performed in an atomic
fashion.
For KVM, the restore of the FPU register state is performed when restoring
the general-purpose guest registers before the SIE instructions is started.
Because the path towards the SIE instruction is interruptible, the CIF_FPU
flag must be checked again right before going into SIE. If set, the guest
registers must be reloaded again by re-entering the outer SIE loop. This
is the same behavior as if the SIE critical section is interrupted.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The kvm_arch_vcpu_load() does not validate whether the floating-point
control (FPC) is valid. Further, the return code of the restore is not
checked too. If the FPC is invalid, the restore fails and the host FPC
value might remain. The correct behavior would be to clear the FPC if it
is not valid. Hence, validate the FPC value and, optionally, reset the
value before restoring it.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
for silicon that no one owns: these are really new features for
everyone.
* ARM: several features are in progress but missed the 4.2 deadline.
So here is just a smattering of bug fixes, plus enabling the VFIO
integration.
* s390: Some fixes/refactorings/optimizations, plus support for
2GB pages.
* x86: 1) host and guest support for marking kvmclock as a stable
scheduler clock. 2) support for write combining. 3) support for
system management mode, needed for secure boot in guests. 4) a bunch
of cleanups required for 2+3. 5) support for virtualized performance
counters on AMD; 6) legacy PCI device assignment is deprecated and
defaults to "n" in Kconfig; VFIO replaces it. On top of this there are
also bug fixes and eager FPU context loading for FPU-heavy guests.
* Common code: Support for multiple address spaces; for now it is
used only for x86 SMM but the s390 folks also have plans.
There are some x86 conflicts, one with the rc8 pull request and
the rest with Ingo's FPU rework.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJViYzhAAoJEL/70l94x66Dda0H/1IepMbfEy+o849d5G71fNTs
F8Y8qUP2GZuL7T53FyFUGSBw+AX7kimu9ia4gR/PmDK+QYsdosYeEjwlsolZfTBf
sHuzNtPoJhi5o1o/ur4NGameo0WjGK8f1xyzr+U8z74QDQyQv/QYCdK/4isp4BJL
ugHNHkuROX6Zng4i7jc9rfaSRg29I3GBxQUYpMkEnD3eMYMUBWGm6Rs8pHgGAMvL
vqzntgW00WNxehTqcAkmD/Wv+txxhkvIadZnjgaxH49e9JeXeBKTIR5vtb7Hns3s
SuapZUyw+c95DIipXq4EznxxaOrjbebOeFgLCJo8+XMXZum8RZf/ob24KroYad0=
=YsAR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull first batch of KVM updates from Paolo Bonzini:
"The bulk of the changes here is for x86. And for once it's not for
silicon that no one owns: these are really new features for everyone.
Details:
- ARM:
several features are in progress but missed the 4.2 deadline.
So here is just a smattering of bug fixes, plus enabling the
VFIO integration.
- s390:
Some fixes/refactorings/optimizations, plus support for 2GB
pages.
- x86:
* host and guest support for marking kvmclock as a stable
scheduler clock.
* support for write combining.
* support for system management mode, needed for secure boot in
guests.
* a bunch of cleanups required for the above
* support for virtualized performance counters on AMD
* legacy PCI device assignment is deprecated and defaults to "n"
in Kconfig; VFIO replaces it
On top of this there are also bug fixes and eager FPU context
loading for FPU-heavy guests.
- Common code:
Support for multiple address spaces; for now it is used only for
x86 SMM but the s390 folks also have plans"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
KVM: s390: clear floating interrupt bitmap and parameters
KVM: x86/vPMU: Enable PMU handling for AMD PERFCTRn and EVNTSELn MSRs
KVM: x86/vPMU: Implement AMD vPMU code for KVM
KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch
KVM: x86/vPMU: introduce kvm_pmu_msr_idx_to_pmc
KVM: x86/vPMU: reorder PMU functions
KVM: x86/vPMU: whitespace and stylistic adjustments in PMU code
KVM: x86/vPMU: use the new macros to go between PMC, PMU and VCPU
KVM: x86/vPMU: introduce pmu.h header
KVM: x86/vPMU: rename a few PMU functions
KVM: MTRR: do not map huge page for non-consistent range
KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type
KVM: MTRR: introduce mtrr_for_each_mem_type
KVM: MTRR: introduce fixed_mtrr_addr_* functions
KVM: MTRR: sort variable MTRRs
KVM: MTRR: introduce var_mtrr_range
KVM: MTRR: introduce fixed_mtrr_segment table
KVM: MTRR: improve kvm_mtrr_get_guest_memory_type
KVM: MTRR: do not split 64 bits MSR content
KVM: MTRR: clean up mtrr default type
...
commit 6d3da24141 ("KVM: s390: deliver floating interrupts in order
of priority") introduced a regression for the reset handling.
We don't clear the bitmap of pending floating interrupts
and interrupt parameters. This could result in stale interrupts
even after a reset. Let's fix this by clearing the pending bitmap
and the parameters for service and machine check interrupts.
Cc: stable@vger.kernel.org # 4.1
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One small fix for a commit targetted for 4.2 and one cleanup
regarding our printks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=t6ws
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-20150602' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
KVM: s390: Fix and cleanup for 4.2 (kvm/next)
One small fix for a commit targetted for 4.2 and one cleanup
regarding our printks.
Let's remove "kvm-s390" from our printk messages and make use
of pr_fmt instead.
Also replace one printk() occurrence by a equivalent pr_warn
on the way.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Thinking about it, I can't find a real use case where we want
to block a VCPU and not kick it out of SIE. (except if we want
to do the same in batch for multiple VCPUs - but that's a micro
optimization)
So let's simply perform the exit_sie() calls directly when setting
the other magic block bits in the SIE.
Otherwise e.g. kvm_s390_set_tod_low() still has other VCPUs running
after that call, working with a wrong epoch.
Fixes: 27406cd50c ("KVM: s390: provide functions for blocking all CPUs")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This lets the function access the new memory slot without going through
kvm_memslots and id_to_memslot. It will simplify the code when more
than one address space will be supported.
Unfortunately, the "const"ness of the new argument must be casted
away in two places. Fixing KVM to accept const struct kvm_memory_slot
pointers would require modifications in pretty much all architectures,
and is left for later.
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Architecture-specific helpers are not supposed to muck with
struct kvm_userspace_memory_region contents. Add const to
enforce this.
In order to eliminate the only write in __kvm_set_memory_region,
the cleaning of deleted slots is pulled up from update_memslots
to __kvm_set_memory_region.
Reviewed-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_memslots provides lockdep checking. Use it consistently instead of
explicit dereferencing of kvm->memslots.
Reviewed-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's unify basic access to sclp fields by storing the data in an external
struct in asm/sclp.h.
The values can now directly be accessed by other components, so there is
no need for most accessor functions and external variables anymore.
The mtid, mtid_max and facility part will be cleaned up separately.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Mostly a bunch of fixes, reworks and optimizations for s390.
There is one new feature (EDAT-2 inside the guest), which boils
down to 2GB pages.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=ovvI
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-20150508' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes and features for 4.2 (kvm/next)
Mostly a bunch of fixes, reworks and optimizations for s390.
There is one new feature (EDAT-2 inside the guest), which boils
down to 2GB pages.
Our implementation will never trigger interception code 12 as the
responsible setting is never enabled - and never will be.
The handler is dead code. Let's get rid of it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch factors out the search for a floating irq destination
VCPU as well as the kicking of the found VCPU. The search is optimized
in the following ways:
1. stopped VCPUs can't take any floating interrupts, so try to find an
operating one. We have to take care of the special case where all
VCPUs are stopped and we don't have any valid destination.
2. use online_vcpus, not KVM_MAX_VCPU. This speeds up the search
especially if KVM_MAX_VCPU is increased one day. As these VCPU
objects are initialized prior to increasing online_vcpus, we can be
sure that they exist.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We can avoid checking guest control registers and guest PSW as well
as all the masking and calculations on the interrupt masks when
no interrupts are pending.
Also, the check for IRQ_PEND_COUNT can be removed, because we won't
enter the while loop if no interrupts are pending and invalid interrupt
types can't be injected.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some updates to the control blocks need to be done in a way that
ensures that no CPU is within SIE. Provide wrappers around the
s390_vcpu_block functions and adopt the TOD migration code to
update in a guaranteed fashion. Also rename these functions to
have the kvm_s390_ prefix as everything else.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
exit_sie_sync is used to kick CPUs out of SIE and prevent reentering at
any point in time. This is used to reload the prefix pages and to
set the IBS stuff in a way that guarantees that after this function
returns we are no longer in SIE. All current users trigger KVM requests.
The request must be set before we block the CPUs to avoid races. Let's
make this implicit by adding the request into a new function
kvm_s390_sync_requests that replaces exit_sie_sync and split out
s390_vcpu_block and s390_vcpu_unblock, that can be used to keep
CPUs out of SIE independent of requests.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
1. Enable EDAT2 in the list of KVM facilities
2. Handle 2G frames in pfmf instruction
If we support EDAT2, we may enable handling of 2G frames if not in 24
bit mode.
3. Enable EDAT2 in sie_block
If the EDAT2 facility is available we enable GED2 mode control in the
sie_block.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We should only enable EDAT1 for the guest if the host actually supports
it and the cpu model for the guest has EDAT-1 enabled.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The fast path for a sie exit is that no kvm reqest is pending.
Make an early check to skip all single bit checks.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Commit ea5f496925 ("KVM: s390: only one external call may be pending
at a time") introduced a bug on machines that don't have SIGP
interpretation facility installed.
The injection of an external call will now always fail with -EBUSY
(if none is already pending).
This leads to the following symptoms:
- An external call will be injected but with the wrong "src cpu id",
as this id will not be remembered.
- The target vcpu will not be woken up, therefore the guest will hang if
it cannot deal with unexpected failures of the SIGP EXTERNAL CALL
instruction.
- If an external call is already pending, -EBUSY will not be reported.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.0
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Several kvm architectures disable interrupts before kvm_guest_enter.
kvm_guest_enter then uses local_irq_save/restore to disable interrupts
again or for the first time. Lets provide underscore versions of
kvm_guest_{enter|exit} that assume being called locked.
kvm_guest_enter now disables interrupts for the full function and
thus we can remove the check for preemptible.
This patch then adopts s390/kvm to use local_irq_disable/enable calls
which are slighty cheaper that local_irq_save/restore and call these
new functions.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Book3S HV only (debugging aids, minor performance improvements and some
cleanups). But there are also bug fixes and small cleanups for ARM,
x86 and s390.
The task_migration_notifier revert and real fix is still pending review,
but I'll send it as soon as possible after -rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVOONLAAoJEL/70l94x66DbsMIAIpZPsaqgXOC1sDEiZuYay+6
rD4n4id7j8hIAzcf3AlZdyf5XgLlr6I1Zyt62s1WcoRq/CCnL7k9EljzSmw31WFX
P2y7/J0iBdkn0et+PpoNThfL2GsgTqNRCLOOQlKgEQwMP9Dlw5fnUbtC1UchOzTg
eAMeBIpYwufkWkXhdMw4PAD4lJ9WxUZ1eXHEBRzJb0o0ZxAATJ1tPZGrFJzoUOSM
WsVNTuBsNd7upT02kQdvA1TUo/OPjseTOEoksHHwfcORt6bc5qvpctL3jYfcr7sk
/L6sIhYGVNkjkuredjlKGLfT2DDJjSEdJb1k2pWrDRsY76dmottQubAE9J9cDTk=
=OAi2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull second batch of KVM changes from Paolo Bonzini:
"This mostly includes the PPC changes for 4.1, which this time cover
Book3S HV only (debugging aids, minor performance improvements and
some cleanups). But there are also bug fixes and small cleanups for
ARM, x86 and s390.
The task_migration_notifier revert and real fix is still pending
review, but I'll send it as soon as possible after -rc1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
KVM: arm/arm64: check IRQ number on userland injection
KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi
KVM: VMX: Preserve host CR4.MCE value while in guest mode.
KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8
KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C
KVM: PPC: Book3S HV: Streamline guest entry and exit
KVM: PPC: Book3S HV: Use bitmap of active threads rather than count
KVM: PPC: Book3S HV: Use decrementer to wake napping threads
KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI
KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken
KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu
KVM: PPC: Book3S HV: Minor cleanups
KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update
KVM: PPC: Book3S HV: Accumulate timing information for real-mode code
KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT
KVM: PPC: Book3S HV: Add ICP real mode counters
KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode
KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock
KVM: PPC: Book3S HV: Add guest->host real mode completion counters
KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte
...
commit b273921356df ("KVM: s390: enable more features that need
no hypervisor changes") also enabled RRBM. Turns out that this
instruction does need some KVM code, so lets disable that bit
again.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Fixes: b273921356df ("KVM: s390: enable more features that need no hypervisor changes")
Message-Id: <1429093624-49611-2-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
Tracepoints have helper functions for the TP_printk() called
__print_symbolic() and __print_flags() that lets a numeric number be
displayed as a a human comprehensible text. What is placed in the
TP_printk() is also shown in the tracepoint format file such that
user space tools like perf and trace-cmd can parse the binary data
and express the values too. Unfortunately, the way the TRACE_EVENT()
macro works, anything placed in the TP_printk() will be shown pretty
much exactly as is. The problem arises when enums are used. That's
because unlike macros, enums will not be changed into their values
by the C pre-processor. Thus, the enum string is exported to the
format file, and this makes it useless for user space tools.
The TRACE_DEFINE_ENUM() solves this by converting the enum strings
in the TP_printk() format into their number, and that is what is
shown to user space. For example, the tracepoint tlb_flush currently
has this in its format file:
__print_symbolic(REC->reason,
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" },
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
After adding:
TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
Its format file will contain this:
__print_symbolic(REC->reason,
{ 0, "flush on task switch" },
{ 1, "remote shootdown" },
{ 2, "local shootdown" },
{ 3, "local mm shootdown" })
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
=Ixwt
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
Tracepoints have helper functions for the TP_printk() called
__print_symbolic() and __print_flags() that lets a numeric number be
displayed as a a human comprehensible text. What is placed in the
TP_printk() is also shown in the tracepoint format file such that user
space tools like perf and trace-cmd can parse the binary data and
express the values too. Unfortunately, the way the TRACE_EVENT()
macro works, anything placed in the TP_printk() will be shown pretty
much exactly as is. The problem arises when enums are used. That's
because unlike macros, enums will not be changed into their values by
the C pre-processor. Thus, the enum string is exported to the format
file, and this makes it useless for user space tools.
The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
the TP_printk() format into their number, and that is what is shown to
user space. For example, the tracepoint tlb_flush currently has this
in its format file:
__print_symbolic(REC->reason,
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" },
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
After adding:
TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
Its format file will contain this:
__print_symbolic(REC->reason,
{ 0, "flush on task switch" },
{ 1, "remote shootdown" },
{ 2, "local shootdown" },
{ 3, "local mm shootdown" })"
* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Add enum_map file to show enums that have been mapped
writeback: Export enums used by tracepoint to user space
v4l: Export enums used by tracepoints to user space
SUNRPC: Export enums in tracepoints to user space
mm: tracing: Export enums in tracepoints to user space
irq/tracing: Export enums in tracepoints to user space
f2fs: Export the enums in the tracepoints to userspace
net/9p/tracing: Export enums in tracepoints to userspace
x86/tlb/trace: Export enums in used by tlb_flush tracepoint
tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
tracing: Allow for modules to convert their enums to values
tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
tracing: Give system name a pointer
brcmsmac: Move each system tracepoints to their own header
iwlwifi: Move each system tracepoints to their own header
mac80211: Move message tracepoints to their own header
tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
tracing: Add TRACE_SYSTEM_VAR to kvm-s390
tracing: Add TRACE_SYSTEM_VAR to intel-sst
...
ARM/ARM64: fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390: interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS: FPU and MIPS SIMD Architecture (MSA) support. Includes some patches
from Ralf Baechle's MIPS tree.
x86: bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJVJ9vmAAoJEL/70l94x66DoMEH/R3rh8IMf4jTiWRkcqohOMPX
k1+NaSY/lCKayaSgggJ2hcQenMbQoXEOdslvaA/H0oC+VfJGK+lmU6E63eMyyhjQ
Y+Px6L85NENIzDzaVu/TIWWuhil5PvIRr3VO8cvntExRoCjuekTUmNdOgCvN2ObW
wswN2qRdPIeEj2kkulbnye+9IV4G0Ne9bvsmUdOdfSSdi6ZcV43JcvrpOZT++mKj
RrKB+3gTMZYGJXMMLBwMkdl8mK1ozriD+q0mbomT04LUyGlPwYLl4pVRDBqyksD7
KsSSybaK2E4i5R80WEljgDMkNqrCgNfg6VZe4n9Y+CfAAOToNnkMJaFEi+yuqbs=
=yu2b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First batch of KVM changes for 4.1
The most interesting bit here is irqfd/ioeventfd support for ARM and
ARM64.
Summary:
ARM/ARM64:
fixes for live migration, irqfd and ioeventfd support (enabling
vhost, too), page aging
s390:
interrupt handling rework, allowing to inject all local interrupts
via new ioctl and to get/set the full local irq state for migration
and introspection. New ioctls to access memory by virtual address,
and to get/set the guest storage keys. SIMD support.
MIPS:
FPU and MIPS SIMD Architecture (MSA) support. Includes some
patches from Ralf Baechle's MIPS tree.
x86:
bugfixes (notably for pvclock, the others are small) and cleanups.
Another small latency improvement for the TSC deadline timer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
KVM: use slowpath for cross page cached accesses
kvm: mmu: lazy collapse small sptes into large sptes
KVM: x86: Clear CR2 on VCPU reset
KVM: x86: DR0-DR3 are not clear on reset
KVM: x86: BSP in MSR_IA32_APICBASE is writable
KVM: x86: simplify kvm_apic_map
KVM: x86: avoid logical_map when it is invalid
KVM: x86: fix mixed APIC mode broadcast
KVM: x86: use MDA for interrupt matching
kvm/ppc/mpic: drop unused IRQ_testbit
KVM: nVMX: remove unnecessary double caching of MAXPHYADDR
KVM: nVMX: checks for address bits beyond MAXPHYADDR on VM-entry
KVM: x86: cache maxphyaddr CPUID leaf in struct kvm_vcpu
KVM: vmx: pass error code with internal error #2
x86: vdso: fix pvclock races with task migration
KVM: remove kvm_read_hva and kvm_read_hva_atomic
KVM: x86: optimize delivery of TSC deadline timer interrupt
KVM: x86: extract blocking logic from __vcpu_run
kvm: x86: fix x86 eflags fixed bit
KVM: s390: migrate vcpu interrupt state
...
New code will require TRACE_SYSTEM to be a valid C variable name,
but some tracepoints have TRACE_SYSTEM with '-' and not '_', so
it can not be used. Instead, add a TRACE_SYSTEM_VAR that can
give the tracing infrastructure a unique name for the trace system.
Link: http://lkml.kernel.org/r/20150402111500.5e52c1ed.cornelia.huck@de.ibm.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
1. Assorted changes
1.1 allow more feature bits for the guest
1.2 Store breaking event address on program interrupts
2. Interrupt handling rework
2.1 Fix copy_to_user while holding a spinlock (cc stable)
2.2 Rework floating interrupts to follow the priorities
2.3 Allow to inject all local interrupts via new ioctl
2.4 allow to get/set the full local irq state, e.g. for migration
and introspection
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Rrx5
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-20150331' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Features and fixes for 4.1 (kvm/next)
1. Assorted changes
1.1 allow more feature bits for the guest
1.2 Store breaking event address on program interrupts
2. Interrupt handling rework
2.1 Fix copy_to_user while holding a spinlock (cc stable)
2.2 Rework floating interrupts to follow the priorities
2.3 Allow to inject all local interrupts via new ioctl
2.4 allow to get/set the full local irq state, e.g. for migration
and introspection
This patch adds support to migrate vcpu interrupts. Two new vcpu ioctls
are added which get/set the complete status of pending interrupts in one
go. The ioctls are marked as available with the new capability
KVM_CAP_S390_IRQ_STATE.
We can not use a ONEREG, as the number of pending local interrupts is not
constant and depends on the number of CPUs.
To retrieve the interrupt state we add an ioctl KVM_S390_GET_IRQ_STATE.
Its input parameter is a pointer to a struct kvm_s390_irq_state which
has a buffer and length. For all currently pending interrupts, we copy
a struct kvm_s390_irq into the buffer and pass it to userspace.
To store interrupt state into a buffer provided by userspace, we add an
ioctl KVM_S390_SET_IRQ_STATE. It passes a struct kvm_s390_irq_state into
the kernel and injects all interrupts contained in the buffer.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's provide a version of kvm_s390_inject_vcpu() that
does not acquire the local-interrupt lock and skips
waking up the vcpu.
To be used in a later patch for vcpu-local interrupt migration,
where we are already holding the lock.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have introduced struct kvm_s390_irq a while ago which allows to
inject all kinds of interrupts as defined in the Principles of
Operation.
Add ioctl to inject interrupts with the extended struct kvm_s390_irq
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We now have a mechanism for delivering interrupts according to their priority.
Let's inject them using our new infrastructure (instead of letting only hardware
handle them), so we can be sure that the irq priorities are satisfied.
For s390, the cpu timer and the clock comparator are to be checked for common
code kvm_cpu_has_pending_timer(), although the cpu timer is only stepped when
the guest is being executed.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch makes interrupt handling compliant to the z/Architecture
Principles of Operation with regard to interrupt priorities.
Add a bitmap for pending floating interrupts. Each bit relates to a
interrupt type and its list. A turned on bit indicates that a list
contains items (interrupts) which need to be delivered. When delivering
interrupts on a cpu we can merge the existing bitmap for cpu-local
interrupts and floating interrupts and have a single mechanism for
delivery.
Currently we have one list for all kinds of floating interrupts and a
corresponding spin lock. This patch adds a separate list per
interrupt type. An exception to this are service signal and machine check
interrupts, as there can be only one pending interrupt at a time.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This fixes a bug introduced with commit c05c4186bb ("KVM: s390:
add floating irq controller").
get_all_floating_irqs() does copy_to_user() while holding
a spin lock. Let's fix this by filling a temporary buffer
first and copy it to userspace after giving up the lock.
Cc: <stable@vger.kernel.org> # 3.18+: 69a8d45626 KVM: s390: no need to hold...
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
After some review about what these facilities do, the following
facilities will work under KVM and can, therefore, be reported
to the guest if the cpu model and the host cpu provide this bit.
There are plans underway to make the whole bit thing more readable,
but its not yet finished. So here are some last bit changes and
we enhance the KVM mask with:
9 The sense-running-status facility is installed in the
z/Architecture architectural mode.
---> handled by SIE or KVM
10 The conditional-SSKE facility is installed in the
z/Architecture architectural mode.
---> handled by SIE. KVM will retry SIE
13 The IPTE-range facility is installed in the
z/Architecture architectural mode.
---> handled by SIE. KVM will retry SIE
36 The enhanced-monitor facility is installed in the
z/Architecture architectural mode.
---> handled by SIE
47 The CMPSC-enhancement facility is installed in the
z/Architecture architectural mode.
---> handled by SIE
48 The decimal-floating-point zoned-conversion facility
is installed in the z/Architecture architectural mode.
---> handled by SIE
49 The execution-hint, load-and-trap, miscellaneous-
instruction-extensions and processor-assist
---> handled by SIE
51 The local-TLB-clearing facility is installed in the
z/Architecture architectural mode.
---> handled by SIE
52 The interlocked-access facility 2 is installed.
---> handled by SIE
53 The load/store-on-condition facility 2 and load-and-
zero-rightmost-byte facility are installed in the
z/Architecture architectural mode.
---> handled by SIE
57 The message-security-assist-extension-5 facility is
installed in the z/Architecture architectural mode.
---> handled by SIE
66 The reset-reference-bits-multiple facility is installed
in the z/Architecture architectural mode.
---> handled by SIE. KVM will retry SIE
80 The decimal-floating-point packed-conversion
facility is installed in the z/Architecture architectural
mode.
---> handled by SIE
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the PER-3 facility is installed, the breaking-event address is to be
stored in the low core.
There is no facility bit for PER-3 in stfl(e) and Linux always uses the
value at address 272 no matter if PER-3 is available or not.
We can't hide its existence from the guest. All program interrupts
injected via the SIE automatically store this information if the PER-3
facility is available in the hypervisor. Also the itdb contains the
address automatically.
As there is no switch to turn this mechanism off, let's simply make it
consistent and also store the breaking event address in case of manual
program interrupt injection.
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This is needed in e.g. ARM vGIC emulation, where the MMIO handling
depends on the VCPU that does the access.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The patch represents capability KVM_CAP_S390_VECTOR_REGISTERS by means
of the SIMD facility bit. This allows to a) disable the use of SIMD when
used in conjunction with a not-SIMD-aware QEMU, b) to enable SIMD when
used with a SIMD-aware version of QEMU and c) finally by means of a QEMU
version using the future cpu model ioctls.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Tested-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Setting the SIMD bit in the KVM mask is an issue because it makes the
facility visible but not usable to the guest, thus it needs to be
removed again.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Provide the KVM_S390_GET_SKEYS and KVM_S390_SET_SKEYS ioctl which can be used
to get/set guest storage keys. This functionality is needed for live migration
of s390 guests that use storage keys.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
