Commit Graph

1076 Commits

Author SHA1 Message Date
Brad Love
fd044de30b media: mceusb: Include three Hauppauge USB dvb device with IR rx
The three following Hauppauge USB DVB devices have IR receivers, but
lacked the support in mceusb to enable it:
- WinTV-HVR-935C
- WinTV-HVR-955Q
- WinTV-HVR-975

Tested HVR-955Q and HVR-975 plus RC5 remote and irw, works as intended.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-22 13:19:55 -05:00
Sean Young
158bc148a3 media: rc: mce_kbd: input events via rc-core's input device
There is no need to create another input device.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05 06:56:24 -04:00
Sean Young
0ac5a603a7 media: rc: imon: report mouse events using rc-core's input device
There is no need to create another input device.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05 06:55:08 -04:00
Sean Young
fec225a043 media: rc: some events are dropped by userspace
libevdev (which is used by libinput) gets a list of keycodes from the
input device on creation. Any events with keycodes which are not in this
list are silently dropped. So, set all keycodes on device creation since
we do not know which will be used if the keymap changes.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-05 06:54:26 -04:00
Matthias Reichl
85e4af0a7a media: rc: ir-rc6-decoder: enable toggle bit for Kathrein RCU-676 remote
The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles
bit 15 (0x8000) on repeated button presses, like MCE remotes.

Add it's customer code 0x80460000 to the 32-bit rc6 toggle
handling code to get proper scancodes and toggle reports.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 14:23:41 -04:00
Sean Young
183e19f5b9 media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macros
This can be done with c99 initializers, which makes the code cleaner
and more transparent. It does require gcc 4.6, because of this bug
in earlier versions:

	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676

Since commit cafa0010cd ("Raise the minimum required gcc version to
4.6"), this is the case.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 14:22:27 -04:00
Sean Young
c5f14af0d8 media: rc: nec keymaps should specify the nec variant they use
The rc_proto field should list the exact variant used by the remote. This
does not change the decoder used, but helps with using keymaps for
transmit purposes.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 14:15:56 -04:00
Mauro Carvalho Chehab
c0decac19d media: use strscpy() instead of strlcpy()
The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 13:32:17 -04:00
David S. Miller
1ba982806c Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-07

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add cgroup local storage for BPF programs, which provides a fast
   accessible memory for storing various per-cgroup data like number
   of transmitted packets, etc, from Roman.

2) Support bpf_get_socket_cookie() BPF helper in several more program
   types that have a full socket available, from Andrey.

3) Significantly improve the performance of perf events which are
   reported from BPF offload. Also convert a couple of BPF AF_XDP
   samples overto use libbpf, both from Jakub.

4) seg6local LWT provides the End.DT6 action, which allows to
   decapsulate an outer IPv6 header containing a Segment Routing Header.
   Adds this action now to the seg6local BPF interface, from Mathieu.

5) Do not mark dst register as unbounded in MOV64 instruction when
   both src and dst register are the same, from Arthur.

6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
   instructions on arm64 for the AF_XDP sample code, from Brian.

7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
   over from Python 2 to Python 3, from Jeremy.

8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.

9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.

10) Several improvements to the README.rst from the BPF documentation
    to make it more consistent with RST format, from Tobin.

11) Replace all occurrences of strerror() by calls to strerror_r()
    in libbpf and fix a FORTIFY_SOURCE build error along with it,
    from Thomas.

12) Fix a bug in bpftool's get_btf() function to correctly propagate
    an error via PTR_ERR(), from Yue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07 11:02:05 -07:00
Linus Torvalds
0585df468e media fixes for v4.18-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbY5PfAAoJEAhfPr2O5OEVCTsP/2d8kSVYtdMbdqwvgNX/Tvnb
 xaEnQiZWirS5E8v1t+M6qB5L/EvOGbGf0O+6Fvzg1lUoHu/Ni4v3b/7CauRCD4ct
 XSR6tQXJ9ySglr5TfY+p2JZvls6R1sDRpOTnWtrllJ4KPALrB4ogavPD8gHV11Ut
 Eza4eARzPrPl0HTFLbUwijiAN+HBFndx8GQIZ8pc/4lVWS4bMQKae+Ev7Crj2rNZ
 hx84QGzTcYmzfqrXJJWOgBtuEg1sN7zuoVtytarGLTxQL97I7761pS1cP57P2wL1
 TQKsK95k1yENBOA2bGg3OGWxMtlhDsCUs2vIpqh1fh/5WXkwJfu6k93E9SosV5YG
 yfTvRbhfqFuLfOvQEz2CdYjKWjXhF+6If1bV35jNFvmGZrA1dtm2hEtVEUe4SOjk
 Xm8a/zwV1u1w8axH89KNQUMpiW6Ad6w/VkZKgsBYzf1vbR5TDHSPnnriZ9EKLVvC
 XOPYLbxlxSxaJF3xwtexH9pI4Ah9RlrmzwXIxHCRH2kzz0sPRVAPPq8EmQhIdZZ5
 COKmNoYE3hKjEMdp6obOTyJOEuhoH8Y/rQF6uSOt2VM6ug1UkAJ7kGeAaNWBzA94
 9IPlAL+W0xpviRc3G5q3FP/06Ok0HHrPlHPFV06/n/fRrcX15tPseCqOzCsiOtcv
 vvIDjdyJQcrzB0Tq8eBk
 =TwSI
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - a deadlock regression at vsp1 driver

 - some Remote Controller fixes related to the new BPF filter logic
   added on it for Kernel 4.18.

* tag 'media/v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: v4l: vsp1: Fix deadlock in VSPDL DRM pipelines
  media: rc: read out of bounds if bpf reports high protocol number
  media: bpf: ensure bpf program is freed on detach
  media: rc: be less noisy when driver misbehaves
2018-08-02 16:55:42 -07:00
Roman Gushchin
394e40a297 bpf: extend bpf_prog_array to store pointers to the cgroup storage
This patch converts bpf_prog_array from an array of prog pointers
to the array of struct bpf_prog_array_item elements.

This allows to save a cgroup storage pointer for each bpf program
efficiently attached to a cgroup.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00
Sean Young
f5dbee6e38 media: rc: read out of bounds if bpf reports high protocol number
The repeat period is read from a static array. If a keydown event is
reported from bpf with a high protocol number, we read out of bounds. This
is unlikely to end up with a reasonable repeat period at the best of times,
in which case no timely key up event is generated.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-30 08:19:53 -04:00
Sean Young
92cab799bb media: bpf: ensure bpf program is freed on detach
Currently we are leaking bpf programs when they are detached from the
lirc device; the refcount never reaches zero.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-26 08:39:18 -04:00
Sean Young
0ca54b2905 media: rc: be less noisy when driver misbehaves
Since commit 48231f289e ("media: rc: drivers should produce alternate
pulse and space timing events"), on meson-ir we are regularly producing
errors. Reduce to warning level and only warn once to avoid flooding
the log.

A proper fix for meson-ir is going to be too large for v4.18.

Signed-off-by: Sean Young <sean@mess.org>
Cc: stable@vger.kernel.org # 4.17+
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-27 10:03:45 -04:00
Sean Young
fdb5c4531c bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF
If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not
possible to attach, detach or query IR BPF programs to /dev/lircN devices,
making them impossible to use. For embedded devices, it should be possible
to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled.

This change requires some refactoring, since bpf_prog_{attach,detach,query}
functions are now always compiled, but their code paths for cgroups need
moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c,
moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not
require #ifdefs since that is already conditionally compiled.

Fixes: f4364dcfc8 ("media: rc: introduce BPF_PROG_LIRC_MODE2")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-26 11:28:38 +02:00
Linus Torvalds
7c00e8ae04 ARM: SoC platform updates
Here are the main updates for SoC support (besides DT additions) for ARM
 32- and 64-bit platforms. The branch also contains defconfig updates to
 turn on drivers and options as needed on the various platforms.
 
 The largest parts of the delta are from cleanups moving platform data
 and board file setup of TI platforms to ti-sysc bus drivers. There are
 also some sweeping changes of eeprom and nand setup on Davinci, i.MX
 and other platforms.
 
 Samsung is removing support for Exynos5440, which was an oddball SoC
 that hasn't been seen much use in designs.
 
 Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
 
 Linus Walleij is also removing support for ux500 (Sony Ericsson)
 U8540/9540 SoCs that never made it to significant mass production and
 products.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCGIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Ks8P/3j87Za+6OTCzo+lW2byUy1CI4muGwxNSIxX
 65A1Wt2qvRDxjCX4MI5Cx8P1YdYJv+5ZF2p4vdlgQXoz3/XDbG+lxJ+/lyWl/+MK
 9kGsQWwEVicbGkaJCYR4ZKvfAwZ9jf7+cndY0Vgii44xQLsQZHEIfIO+mdlK43GZ
 xqaSckLQQzsDqjMUIckiyVy97RsDk1eLK+H2I+l7qs9v0z5UnhoD2CTxX5LzT8eH
 NlFmfUPN7Znshmt0aMznZyBRr2oM5Dsg49SfG0WhbOzyiZjSpw8MQ0N+RzyROhhB
 h5PjyuZN9fx2dO8Jjkqt3B8KmGFNDarGOmrasIJeCJDFRa9NStqFn0y4qJXS2wU7
 4La3GoBYRV8x0gq339pQ+70qKuD06e62GL7kV656yi+93CitWxy6IjrIACjSX6zH
 PD1hQpewfXAcHAHdBqNevRcz/sjG+36GJSCgI4umSP48NMlCuZafFAT4U/PVlt4E
 6VRQDeoi5ZFYIuPL1+bZvHax4fFxJGnaf02uQ/OPYP1o48AueSSvdo6bUPFbhwOD
 u0/uo3r+HxtQsw9I3tP3kj3/775BJclkO6zbG/dGZ8obuzuDwhuFtr3rzCrP/IzN
 n3rcBuFNZE6SQeKU+Tvmnh8ZLhJc5L8EYvqmihZj+BSfprBc8POFR2la4MRnHSn+
 tPEC/n9E
 =S5wc
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...
2018-06-11 17:49:09 -07:00
Linus Torvalds
3036bc4536 media updates for v4.18-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbGDjcAAoJEAhfPr2O5OEV1KwP/Am2n5Ehc2W0/DLD3K7LlwgN
 8JnMPWNQTCreLRgJD0/KX+HH1M+yBJ05KF/Glm7fcOKpOhWqrUbPgtiQT0GyHHBB
 uvmQfGJrRvCrP+1S1SeWtNhItsyWvCfDaorzsTWJYEF/F9Wtj/Sj92DC1y/BKQaR
 Rcs4yeCqlFEp3rjbXExanFhA3/XeMzK2sby8c51cILTZPkWI64qrHcZRWOW7+zZ6
 fKEVDNOKxa7sfg8I9yaI73lBGXBpCJxLROloJ3jEtuH5gY3nR6PZdXunBC5K0+pX
 UH1vUeBcS/3ExQWL0zmCqHz1aYb6kzTSbIPs+NktxyzTTb8FDjT9JhV/9AxhEQfK
 iIxv81LRBdbEoPxbvx88sj5VVvlRla/NRv03WsXhhVDqx2SZJuNgSXw3XJtGDx3j
 AuUur0AQH4KMNNmwxmyn6wbhm7N63AaGbmYE2sRmaL7lk6b48BSbsUpOM5AMWzZe
 ZsESSsoqjRR86zFtVVzI7ZImCk16D6mNRP94Z0DQReWAJ6zS57/EYfKZ+pEQ6mww
 IyoJalD+pBe160fqsSo59F4k2fqzsqP4p8m29OQWFvyl7+UboMBz7FscWfyT98+R
 MbJolZ8QJNlOVaOusxPYLfdfjVmkHCt4E0cBZVFYIvliTGd5QiKqHAW+kTYQH0No
 Y0nHm4bShsUY8I9YCgsk
 =r/WP
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - remove of atomisp driver from staging, as nobody would have time to
   dedicate huge efforts to fix all the problems there. Also, we have a
   feeling that the driver may not even run the way it is.

 - move Zoran driver to staging, in order to be either fixed to use VB2
   and the proper media kAPIs or to be removed

 - remove videobuf-dvb driver, with is unused for a while

 - some V4L2 documentation fixes/improvements

 - new sensor drivers: imx258 and ov7251

 - a new driver was added to allow using I2C transparent drivers

 - several improvements at the ddbridge driver

 - several improvements at the ISDB pt1 driver, making it more coherent
   with the DVB framework

 - added a new platform driver for MIPI CSI-2 RX: cadence

 - now, all media drivers can be compiled on x86 with COMPILE_TEST

 - almost all media drivers now build on non-x86 architectures with
   COMPILE_TEST

 - lots of other random stuff: cleanups, support for new board models,
   bug fixes, etc

* tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
  media: omap2: fix compile-testing with FB_OMAP2=m
  media: media/radio/Kconfig: add back RADIO_ISA
  media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl()
  media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
  media: arch: sh: migor: Fix TW9910 PDN gpio
  media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure
  media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG
  media: marvel-ccic: allow ccic and mmp drivers to coexist
  media: uvcvideo: Prevent setting unavailable flags
  media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges
  media: dvb-frontends/stv0910: make TS speed configurable
  media: ddbridge/mci: add identifiers to function definition arguments
  media: ddbridge/mci: protect against out-of-bounds array access in stop()
  media: rc: ensure input/lirc device can be opened after register
  media: rc: nuvoton: Keep device enabled during reg init
  media: rc: nuvoton: Keep track of users on CIR enable/disable
  media: rc: nuvoton: Tweak the interrupt enabling dance
  media: uvcvideo: Support realtek's UVC 1.5 device
  media: uvcvideo: Fix driver reference counting
  media: gspca_zc3xx: Enable short exposure times for OV7648
  ...
2018-06-07 12:34:37 -07:00
Sean Young
f4364dcfc8 media: rc: introduce BPF_PROG_LIRC_MODE2
Add support for BPF_PROG_LIRC_MODE2. This type of BPF program can call
rc_keydown() to reported decoded IR scancodes, or rc_repeat() to report
that the last key should be repeated.

The bpf program can be attached to using the bpf(BPF_PROG_ATTACH) syscall;
the target_fd must be the /dev/lircN device.

Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-30 12:38:40 +02:00
Sean Young
d7832cd2a3 media: rc: ensure input/lirc device can be opened after register
Since commit cb84343fce ("media: lirc: do not call close() or open() on
unregistered devices") rc_open() will return -ENODEV if rcdev->registered
is false. Ensure this is set before we register the input device and the
lirc device, else we have a short window where the neither the lirc or
input device can be opened.

Fixes: cb84343fce ("media: lirc: do not call close() or open() on unregistered devices")

Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28 17:40:33 -04:00
Michał Winiarski
d24e56f6fb media: rc: nuvoton: Keep device enabled during reg init
Doing writes when the device is disabled seems to be a NOOP.
For CIR device, we should enable it, initialize it, and then disable it
until it's opened. CIR_WAKE should always be enabled.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28 17:39:49 -04:00
Michał Winiarski
adbe6cfe59 media: rc: nuvoton: Keep track of users on CIR enable/disable
Core rc keeps track of the users - let's use it to tweak the code and
use the common code path on suspend/resume.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28 17:37:42 -04:00
Michał Winiarski
70c30b1ea7 media: rc: nuvoton: Tweak the interrupt enabling dance
It appears that we need to enable CIR device before attempting to touch
some of the registers. Previously, this was not a big issue, since we
were rarely seeing nvt_close() getting called.

Unfortunately, since commit cb84343fce ("media: lirc: do not call close()
or open() on unregistered devices") the initial open() during probe from
rc_setup_rx_device() is no longer successful, which means that userspace
clients will actually end up calling nvt_open()/nvt_close(). Since
nvt_open() is broken, the device doesn't seem to work as expected.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199597

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28 17:36:31 -04:00
Matthias Reichl
0630efeee8 media: rc: ite-cir: lower timeout and extend allowed timeout range
The minimum possible timeout of ite-cir is 8 samples, which is
typically about 70us. The driver however changes the FIFO trigger
level from the hardware's default of 1 byte to 17 bytes, so the minimum
usable timeout value is 17 * 8 samples, which is typically about 1.2ms.

Tests showed that using timeouts down to 1.2ms actually work fine.

The current default timeout of 200ms is much longer than necessary and
the maximum timeout of 1s seems to have been chosen a bit arbitrarily.

So change the minimum timeout to the driver's limit of 17 * 8 samples
and bring timeout and maximum timeout in line with the settings
of many other receivers.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:17:28 -04:00
Sean Young
5dae9cea2a media: rc: winbond: do not send reset and timeout raw events on startup
ir_raw_event_set_idle() sends a timeout event which is not needed, and
on startup no reset event is needed either.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:17:06 -04:00
Sean Young
09161a0552 media: rc: decoders do not need to check for transitions
Drivers should never produce consecutive pulse or space raw events. Should
that occur, we would have bigger problems than this code is trying to
guard against.

Note that we already log an error should a driver misbehave.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:16:24 -04:00
Sean Young
48231f289e media: rc: drivers should produce alternate pulse and space timing events
Report an error if this is not the case or any problem with the generated
raw events.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:15:51 -04:00
Sean Young
e0d51e6cef media: rc: default to idle on at startup or after reset
Any spaces events received after a reset or startup should be discarded,
so ensure the rc device is in idle mode.

This also makes it much easier to detect incorrect raw events, as we will
do in a following commit.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:14:51 -04:00
Sean Young
e708e5a44d media: mceusb: add missing break
Fallthrough is not intended here.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:12:33 -04:00
Sean Young
d4589935eb media: mceusb: filter out bogus timing irdata of duration 0
A mceusb device has been observed producing invalid irdata. Proactively
guard against this.

Suggested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:12:11 -04:00
Sean Young
aec3eadfb6 media: mceusb: MCE_CMD_SETIRTIMEOUT cause strange behaviour on device
If the IR timeout is set on vid 1784 pid 0011, the device starts
behaving strangely.

Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14 07:11:37 -04:00
Olof Johansson
e5d9875ecd ti-sysc driver related changes for omap variants
This series improves the ti-sysc interconnect target module driver to
 the point where a most of SoC can be booted with interconnect target
 module data configured in device tree instead of legacy platform data.
 The related device tree changes need some more work though, and can
 wait for v4.19. Also some drivers using nested interconnects like DSS
 need more work.
 
 We can now remove the unused pm-noop code that is not doing anything
 any longer. And we can now initialize things for PM and display pdata
 later to prepare things for using ti-sysc driver.
 
 We also need to add  some more quirk handling so we can boot both with
 platform data and dts data.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlrsg9QRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNmwxAAzPt1GpHQSw/XhhtK8+DLlqo9fdPQ9C65
 Iw+PyvQYy2bTj0y64VkZ4Msmi3SOhfr5zKhIrwBHEG59/LW81oXqnb9JZHPP+YC+
 /A6ZufXIt8X+Nd1L6id2OD9ItJoLXk7llBvDckwb/zUgcVib9cA79GvWgexfRWBE
 w/bjZfUibddYdhKoCGmvWcZBapDKHMfv8MdN8h0QUyofTIefZZeykRvb1Pmn7Ntl
 vz3QfPUq3oyRfG9PMRI7mjHrW7jxEKgjvWANbUg64UQJN7s1tfa8ICpzycc4/X/a
 pdetH7G+BPaRdeqDCmGrcGHfO4b5HyD7nkTD3R6yzV+Dw8nWl+aWGJHAsPYRUJkd
 o/BroflhqK2ICfEkeK6AWebbicOSlF5P+EEFwp6pHSd/9JiEqR1IkhcCvTdV8CB1
 qyUQxD+iKof+rY5f1EicaGq8HXhkV+9aIOoqBH6C0qObEJDUWvVoGIzDdN2vwVAu
 C2w9WqdQII3R4g2ZX1SmdEqFO/f6PkAoKiyNt+WGBGBUfYo1sfwpkFAEeGU50moJ
 5m9TtLcAbbvgMwy2ttfWcHPn5z3p4Ocf7aN93TZ6RPk6A6R57PzCcYqJ2bXsumeV
 5yaP9w4pbFj+FQuu8jA8s/cSwhIP8SwqwFWKCi2JcU3ugEdJfwF555y5bm0R9MDz
 7W82aAicw+M=
 =jYZ6
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

ti-sysc driver related changes for omap variants

This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.

We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.

We also need to add  some more quirk handling so we can boot both with
platform data and dts data.

* tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Show module information for suspend if DEBUG is enabled
  bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
  bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
  bus: ti-sysc: Detect omap4 type timers for quirk
  bus: ti-sysc: Add initial support for external resets
  bus: ti-sysc: Improve suspend and resume handling
  bus: ti-sysc: Tag some modules resource providers for noirq suspend
  bus: ti-sysc: Add handling for clkctrl opt clocks
  bus: ti-sysc: Make child clock alias handling more generic
  bus: ti-sysc: Handle simple-bus for nested children
  ARM: OMAP2+: Make display related init into device_initcall
  ARM: OMAP2+: Initialize SoC PM later
  ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
  ARM: OMAP2+: Use signed value for sysc register offsets
  ARM: OMAP2+: Allow using ti-sysc for system timers
  ARM: OMAP2+: Drop unused pm-noop

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-14 01:18:44 -07:00
Mauro Carvalho Chehab
71db1cd7ff Linux 4.17-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlrvwLAeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGEX4H/iRAefubpMXptH55
 ru/Mr7hsbKtKQOCmH3LuYP2SwSEHclX+kxHfiaIMsBN9iOGWpRJkZVLuOG0Vl0sZ
 d68I5UTEJHPY0FZqOvfXY1sLTfG9jlhQ/SyppVyuL+QbH+cecnWqvkMkwo2p99MJ
 7OZ3wZjSObaJGXEoLUbZrEbTf8PsT8eT7MWMkmOJHO/J8rnnoDKaOiB5fBxhck0M
 xd/FdOYNZhqOfzIMUuLPWPE3THjfJuIQOYsTvEq0lcuAD2ZOesbV5hsGLC1AG6jd
 GaJJKy80mRvPXSLv7GTigBG9zZbs0mszDJeeh0FCjSlc3sjMDZn7A12N1c8AcQ52
 rLmzSQ8=
 =Nmna
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rc4' into patchwork

Linux 4.17-rc4

* tag 'v4.17-rc4': (920 commits)
  Linux 4.17-rc4
  KVM: x86: remove APIC Timer periodic/oneshot spikes
  genksyms: fix typo in parse.tab.{c,h} generation rules
  kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)
  gcc-plugins: fix build condition of SANCOV plugin
  MAINTAINERS: Update Kbuild entry with a few paths
  Revert "usb: host: ehci: Use dma_pool_zalloc()"
  platform/x86: Kconfig: Fix dell-laptop dependency chain.
  platform/x86: asus-wireless: Fix NULL pointer dereference
  arm64: vgic-v2: Fix proxying of cpuif access
  KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
  KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
  MAINTAINERS & files: Canonize the e-mails I use at files
  media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR
  tools: power/acpi, revert to LD = gcc
  bdi: Fix oops in wb_workfn()
  RDMA/cma: Do not query GID during QP state transition to RTR
  IB/mlx4: Fix integer overflow when calculating optimal MTT size
  IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
  IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
  ...
2018-05-10 07:19:23 -04:00
Mauro Carvalho Chehab
6ba0b22d20 media: rc: allow build pnp-dependent drivers with COMPILE_TEST
The pnp header already provide enough stub to build those
drivers with COMPILE_TEST on non-x86 archs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 09:47:45 -04:00
Sean Young
f9d94a10da media: rc: imon decoder: support the stick
The iMON PAD controller has a analog stick, which can be switched to
keyboard mode (cursor keys) or work as a crappy mouse.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:22:09 -04:00
Sean Young
c00cb587a2 media: rc: only register protocol for rc device if enabled
The raw_register function exists to create input devices associated with
that IR protocol.

If the mce_kbd module is loaded, then every rc device will have mce_kbd
input devices, even if the protocol is not enabled. Change this to call
the register function to when the protocol is enabled.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 08:21:04 -04:00
Mauro Carvalho Chehab
3259081991 MAINTAINERS & files: Canonize the e-mails I use at files
From now on, I'll start using my @kernel.org as my development e-mail.

As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.

For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.

For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.

For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04 06:21:06 -04:00
Ryder Lee
5d0af51fac media: rc: mtk-cir: use of_device_get_match_data()
The usage of of_device_get_match_data() reduce the code size a bit.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:24:04 -04:00
Andi Shyti
c42c3e61bf media: rc: ir-spi: update Andi's e-mail
Because I will be leaving Samsung soon, update my e-mail to the
etezian.org mail.

Cc: Andi Shyti <andi@etezian.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:23:28 -04:00
Sean Young
877f1a7cee media: rc: mceusb: allow the timeout to be configurable
mceusb devices have a default timeout of 100ms, but this can be changed.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:22:14 -04:00
Sean Young
91352b5727 media: rc: mceusb: IR of length 0 means IR timeout, not reset
The last usb packet with IR data will end with 0x80 (MCE_IRDATA_TRAILER).
If we reset the decoder state at this point, IR decoding can fail.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:21:47 -04:00
Sean Young
53a62800ef media: rc: mce_kbd decoder: fix race condition
The MCE keyboard sends both key down and key up events. We have a timeout
handler mce_kbd_rx_timeout() in case the keyup event is never received;
however, this may race with new key down events from occurring.

The race is that key down scancode arrives and key down events are
generated. The timeout handler races this and generates key up events
straight afterwards. Since the keyboard generates scancodes every 100ms,
most likely the keys will be repeated 100ms later, and now we have new
key down events and the user sees duplicate key presses.

Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:20:45 -04:00
Sean Young
cb5bd0575c media: rc: mce_kbd decoder: remove superfluous call to input_sync
There is nothing to sync in this code path.

Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:19:35 -04:00
Sean Young
63039c29f7 media: rc: mce_kbd decoder: fix stuck keys
The MCE Remote sends a 0 scancode when keys are released. If this is not
received or decoded, then keys can get "stuck"; the keyup event is not
sent since the input_sync() is missing from the timeout handler.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:19:14 -04:00
Sean Young
539327608d media: rc: mce_kbd protocol encodes two scancodes
If two keys are pressed, then both keys are encoded in the scancode. This
makes the mce keyboard more responsive.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:18:33 -04:00
Sean Young
c421c62a4a media: rc: mce_kbd decoder: low timeout values cause double keydowns
The mce keyboard repeats pressed keys every 100ms. If the IR timeout
is set to less than that, we send key up events before the repeat
arrives, so we have key up/key down for each IR repeat.

The keyboard ends any sequence with a 0 scancode, in which case all keys
are cleared so there is no need to run the timeout timer: it only exists
for the case that the final 0 was not received.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:17:43 -04:00
Sean Young
284922562b media: rc: per-protocol repeat period and minimum keyup timer
Each IR protocol has its own repeat period. We can minimise the keyup
timer to be the protocol period + IR timeout. This makes keys less
"sticky" and makes IR more reactive and nicer to use.

This feature was previously attempted in commit d57ea877af ("media: rc:
per-protocol repeat period"), but that did not take the IR timeout into
account, and had to be reverted.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:16:55 -04:00
Sean Young
95d1544eb6 media: rc: add ioctl to get the current timeout
Since the kernel now modifies the timeout, make it possible to retrieve
the current value.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:15:18 -04:00
Sean Young
a86d6df84a media: rc: set timeout to smallest value required by enabled protocols
The longer the IR timeout, the longer the rc device waits until delivering
the trailing space. So, by reducing this timeout, we reduce the delay for
the last scancode to be delivered.

Note that the lirc daemon disables all protocols, in which case we revert
back to the default value.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:14:31 -04:00
Sean Young
ed8c34d7ec media: rc: report receiver and transmitter type on device register
On the raspberry pi, we might have two lirc devices; one for sending and
one for receiving. This change makes it much more apparent which one
is which.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20 09:12:43 -04:00
Mauro Carvalho Chehab
ee2d243d6b media: st_rc: Don't stay on an IRQ handler forever
As warned by smatch:
	drivers/media/rc/st_rc.c:110 st_rc_rx_interrupt() warn: this loop depends on readl() succeeding

If something goes wrong at readl(), the logic will stay there
inside an IRQ code forever. This is not the nicest thing to
do :-)

So, add a timeout there, preventing staying inside the IRQ
for more than 10ms.

Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-17 05:50:05 -04:00
Tony Lindgren
44773ba170 ARM: OMAP2+: Drop unused pm-noop
Looks like these functions don't do anything in the mainline kernel so
we can just drop it.

Note that we must now also remove ir-rx51 pdata as it relies on the dummy
platform data that does not do anything. And ir-rx51 is calling a pdata
callback that doesn't do anything without checking if it exists first.

For configuring device specific minimal latencies, the interface to use
is pm_qos_add_request(). For an example, see what was done in commit
9834ffd1ec ("ASoC: omap-mcbsp: Add PM QoS support for McBSP to prevent
glitches"). I've added some comments to ir-rx51 so people using it can
add pm_qos support and test it.

Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-04-16 10:22:40 -07:00
Linus Torvalds
ef1c4a6fa9 media updates for v4.17-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaw1yeAAoJEAhfPr2O5OEVDDgQAIYpin6obedJOm7zIm741Q0S
 fS2FL2pygyvHlVtU20ERHgvM6aD5tujekpDM4+GNgnq0aAabxvqBvdohmHQjyVSw
 FgszgY6kQSnI8S4Oy9RB8H/MFRq7Wz9Qf+KmJh0SfuUoMzBe2A40yLjYQ+sAMJr9
 mm0ijxxRpFYikVtIBgKDbjnx6wdkOs12M7YlJuI8N/tMBHMt+p2EfvqcX6GF725i
 sgLGcMsTJr1sUSyY8vnM2pAlKfZL2tZqigx5f9sB4UM7uHSw/oL/a/8I+t6Mju1X
 J1BD3L7UtTpwqO9sAR5BsJQ+0pAkXNOF+eLGs2p9rx4sO0DOLKoUptMI+YryvE86
 /SOlTskSSAeX/rBFyZJw1zv0/9mdGrHoyCy0q/lfDkD/mQkrUJDDZ7GPLqZ9rLUe
 2cXn1xMWB/soeR70oTyew0D2SZkp6y4DQr0Rwje7V8/SOWMmJvhaVIWhVIP9ZrS6
 AvCS7WUYTTVIX+td2glnLkJ5SaXXJyRYv8Utp/TUrYvCFOX7wsk7F0pRY4PE4PeZ
 BL7Bl8H9l3HGWWhdqPvw+ETdJgcbq/IwVUcpuuEPjkhDZEqHz//vzwoPt1nT4v6M
 gfqfaW5LaYuj0MYYqyxZMDwP3FWk4SsQ0NZzmaFs+yfE17bcWUMuf3ZVJtjmLxzk
 RUo0E/7RZsrw7LkCy0KF
 =bzhS
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new CEC pin injection code for testing purposes

 - DVB frontend cxd2099 promoted from staging

 - new platform driver for Sony cxd2880 DVB devices

 - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
   tw9910.c

 - removal of unused cx18 and ivtv alsa mixers

 - the reneseas-ceu driver doesn't depend on soc_camera anymore and
   moved from staging

 - removed the mantis_vp3028 driver, unused since 2009

 - s5p-mfc: add support for version 10 of the MSP

 - added a decoder for imon protocol

 - atomisp: lots of cleanups

 - imx074 and mt9t031: don't depend on soc_camera anymore, being
   promoted from staging

 - added helper functions to better support DVB I2C binding

 - lots of driver improvements and cleanups

* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
  media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
  media: fimc-capture: get rid of two warnings
  media: dvb-usb-v2: fix a missing dependency of I2C_MUX
  media: uvc: to the right check at uvc_ioctl_enum_framesizes()
  media: cec-core: fix a bug at cec_error_inj_write()
  media: tda9840: cleanup a warning
  media: tm6000:  avoid casting just to print pointer address
  media: em28xx-input: improve error handling code
  media: zr364xx: avoid casting just to print pointer address
  media: vivid-radio-rx: add a cast to avoid a warning
  media: saa7134-alsa: don't use casts to print a buffer address
  media: solo6x10: get rid of an address space warning
  media: zoran: don't cast pointers to print them
  media: ir-kbd-i2c: change the if logic to avoid a warning
  media: ir-kbd-i2c: improve error handling code
  media: saa7134-input: improve error handling
  media: s2255drv: fix a casting warning
  media: ivtvfb: Cleanup some warnings
  media: videobuf-dma-sg: Fix a weird cast
  soc_camera: fix a weird cast on printk
  ...
2018-04-03 17:16:59 -07:00
Sean Young
35ecf2b4d2 media: rc: mceusb: pid 0x0609 vid 0x031d does not under report carrier cycles
This mceusb does not need the carrier count quirk, with it set it reports
the carrier higher than it is.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:03:03 -04:00
A Sun
279c60fd89 media: mceusb: add IR learning support features (IR carrier frequency measurement and wide-band/short-range receiver)
Windows Media Center IR transceivers include two IR receivers;
wide-band/short-range and narrow-band/long-range. The short-range
(5cm distance) receiver is for IR learning and has IR carrier
frequency measuring ability.

Add mceusb driver support to select the short range IR receiver
and enable pass through of its IR carrier frequency measurements.

RC and LIRC already support these mceusb driver additions.

Test platform:

Linux raspberrypi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l GNU/Linux
mceusb 1-1.2:1.0: Registered Pinnacle Systems PCTV Remote USB with mce emulator interface version 1
mceusb 1-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)

Sony TV remote control

ir-ctl from v4l-utils

pi@raspberrypi:~ $ ir-ctl -V
IR raw version 1.12.3
pi@raspberrypi:~ $ ir-ctl -m -r
...
pulse 650
space 550
pulse 650
space 600
pulse 600
space 600
pulse 1200
space 600
pulse 650
space 550
pulse 650
space 600
pulse 600
space 600
pulse 550
carrier 40004
space 16777215
^C
pi@raspberrypi:~ $ exit

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 14:02:21 -04:00
Sean Young
b358e747ae media: rc: meson-ir: lower timeout and make configurable
A timeout of 200ms is much longer than necessary, and delays the decoding
decoding of a single scancode and the last scancode when a button is being
held. This makes the remote seem sluggish.

If the min_timeout and max_timeout values are set, the timeout is
configurable via the LIRC_SET_REC_TIMEOUT ioctl.

Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 13:59:38 -04:00
Sean Young
8d7a77ce56 media: rc: meson-ir: add timeout on idle
Meson doesn't seem to be able to generate timeout events in hardware. So
install a software timer to generate the timeout events required by the
decoders to prevent "ghost keypresses".

Reported-by: Matthias Reichl <hias@horus.com>
Tested-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 13:54:51 -04:00
Sean Young
2525fdcb6e media: imon: rename protocol from other to imon
This renames the protocol for the imon rc driver from other to imon,
since it is now an known protocol. Although different name will show up
in the sysfs protocol file, loading a keymap using existing ir-keytable
versions still works.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:13:15 -04:00
Sean Young
447dcc0cf1 media: rc: add new imon protocol decoder and encoder
This makes it possible to use the various iMON remotes with any raw IR
RC device.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:12:29 -04:00
Sean Young
8d4068810d media: rc: oops in ir_timer_keyup after device unplug
If there is IR in the raw kfifo when ir_raw_event_unregister() is called,
then kthread_stop() causes ir_raw_event_thread to be scheduled, decode
some scancodes and re-arm timer_keyup. The timer_keyup then fires when
the rc device is long gone.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:11:26 -04:00
Sean Young
8a4e8f8dfc media: rc: new driver for early iMon device
These devices were supported by the lirc_imon.c driver which was removed
from staging in commit f41003a23a ("[media] staging: lirc_imon: port
remaining usb ids to imon and remove").

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:11:04 -04:00
Sean Young
572eca036d media: rc: add keymap for iMON RSC remote
Note that the stick on the remote is not supported yet.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:10:14 -04:00
Sean Young
1b450f211e media: Revert "[media] staging: lirc_imon: port remaining usb ids to imon and remove"
This code was ported without the necessary hardware to test. There
are multiple problems which are more easily solved by writing a
separate driver.

This reverts commit f41003a23a.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:09:44 -04:00
Philipp Rossak
10e712064b media: rc: update sunxi-ir driver to get base clock frequency from devicetree
This patch updates the sunxi-ir driver to set the base clock frequency from
devicetree.

This is necessary since there are different ir receivers on the
market, that operate with different frequencies. So this value could be
set if the attached ir receiver needs a different base clock frequency,
than the default 8 MHz.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:08:33 -04:00
James Hogan
43e951e744
media: img-ir: Drop METAG dependency
Now that arch/metag/ has been removed, remove the METAG dependency from
the IMG IR device driver. The hardware is also present on MIPS SoCs so
the driver still has value.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: linux-metag@vger.kernel.org
2018-03-05 16:34:25 +00:00
Sean Young
e3e389f931 media: rc: fix race condition in ir_raw_event_store_edge() handling
There is a possible race condition between the IR timeout being generated
from the timer, and new IR arriving. This could result in the timeout
being added to the kfifo after new IR arrives. On top of that, there is
concurrent write access to the kfifo from ir_raw_event_store_edge() and
the timer.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-27 08:16:09 -05:00
Sean Young
5817b3d15e media: rc: no need to announce major number
Since commit a60d64b15c ("media: lirc: lirc interface should not be
a raw decoder"), the message in the documentation is incorrect as the
module name is rc_core, not lirc_dev. Since the message is not useful,
just make the message debug and remove it from the documentation.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-27 08:15:32 -05:00
Sean Young
2942273701 media: rc: get start time just before calling driver tx
The current code gets the start time before copying the IR from
userspace (could cause page faults) and encoding IR. This means
that the gap calculation could be off.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 14:17:21 -05:00
Sean Young
c2837ad090 media: rc: remove useless if statement
ret is always 0, so remove if statement.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 14:16:39 -05:00
Sean Young
ba02086dee media: rc: remove obsolete comment
This comment is no longer relevant.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 14:16:14 -05:00
Sean Young
1f17f684d9 media: rc: remove IR_dprintk() from rc-core
Use dev_dbg() rather than custom debug function.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 14:15:46 -05:00
Sean Young
50078a9038 media: rc: replace IR_dprintk() with dev_dbg in IR decoders
Use dev_dbg() rather than custom debug function.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 14:14:32 -05:00
Sean Young
069edf8a6a media: rc: ir-spi: fix duty cycle
Calculate the pulse rather than having a few preset values.

Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:36:00 -05:00
Alexey Khoroshilov
de5b22d987 media: rc: ir-hix5hd2: fix error handling of clk_prepare_enable()
Return code of clk_prepare_enable() is ignored in many places.
The patch adds error handling for all of them.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:35:05 -05:00
Andi Kleen
22756ae731 media: rc: don't mark IR decoders default y
I usually update my config with make oldconfig and pressing return,
trusting that whoever updates Kconfig sets sensible defaults.

But my recent kernels ended up with all kinds of IR decoders
built in that are not used by anything because they are all
marked with default y.

default y should only be set for something that prevents
booting on common systems, never for some random weirdo
driver feature like this.

Remove all the "default y" in drivers/media/rc/Kconfig

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:34:15 -05:00
Linus Torvalds
a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Linus Torvalds
68c5735eaa media updates for v4.16-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJacX62AAoJEAhfPr2O5OEVjKYP/R3v+c8ztiHzaeibcZZ8IFNl
 58E0Y0yGa8OpoGJx9uqtEOamQmZoHhACfId7joIp/Jv38bgWAdbxOmk3Y4FDCFqG
 1bRrpnnmvlfabiMMfLpURLqKhf7rJMtErZkrnmmqg9P/lEMohaZUJAsgBZNfJM8l
 fZeacSnCSpzlxVcUb9Bf4vWhLk39R+xFzvFrwzbVUIHf3bDVpf4S4kNorMkhSZSF
 HaISYXqVMhpKca7CngVKytbfacUStUY01cXcjdMuB/sD7ySwdtKogbPMvrOSaexz
 G/8MB+sGT1JKUgIlh6Qv8hX805KuxBgfP19XSOH46nNU8KbYegdGhN5QXlokwI1m
 dAOiozkU93r5yBZl6QzkN3uwXe492PoLgczifg97pzAJP0BfWeFStkYqlugLTwwC
 Slmr7g3FZVJajbPl6WyioAGW7xfqBF7ftScZOHYxmhy41CWCGKJctmsJOjncyz5O
 GInEIP3KR4CgjR+iM1LoKvE+OvVo4kRc7hrcUsjQNsbfBn6xiixjwH+5M+UVvezA
 6UQpmtWGg4pX1djb8j8f6mKF8KZM12Pp3jb4Rl1cLsytN5BOBKaMEKdV3rgL+19P
 Yo0x/1wK/unkI20Om71vYyQ0nXVF9j7Tpeij5u0M57TeTVYCwloQgHmrcvQJdo8+
 Pqw5XEUiDpAIjvKp0XGh
 =H9AS
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - videobuf2 was moved to a media/common dir, as it is now used by the
   DVB subsystem too

 - Digital TV core memory mapped support interface

 - new sensor driver: ov7740

 - several improvements at ddbridge driver

 - new V4L2 driver: IPU3 CIO2 CSI-2 receiver unit, found on some Intel
   SoCs

 - new tuner driver: tda18250

 - finally got rid of all LIRC staging drivers

 - as we don't have old lirc drivers anymore, restruct the lirc device
   code

 - add support for UVC metadata

 - add a new staging driver for NVIDIA Tegra Video Decoder Engine

 - DVB kAPI headers moved to include/media

 - synchronize the kAPI and uAPI for the DVB subsystem, removing the gap
   for non-legacy APIs

 - reduce the kAPI gap for V4L2

 - lots of other driver enhancements, cleanups, etc.

* tag 'media/v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (407 commits)
  media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
  media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
  media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
  media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
  media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
  media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
  media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
  media: v4l2-compat-ioctl32.c: avoid sizeof(type)
  media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
  media: v4l2-compat-ioctl32.c: fix the indentation
  media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
  media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
  media: v4l2-ioctl.c: use check_fmt for enum/g/s/try_fmt
  media: vivid: fix module load error when enabling fb and no_error_inj=1
  media: dvb_demux: improve debug messages
  media: dvb_demux: Better handle discontinuity errors
  media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
  media: ts2020: avoid integer overflows on 32 bit machines
  media: i2c: ov7740: use gpio/consumer.h instead of gpio.h
  media: entity: Add a nop variant of media_entity_cleanup
  ...
2018-02-06 11:27:48 -08:00
Linus Torvalds
168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Sean Young
80008ddbed media: rc: do not remove first bit if leader pulse is present
The rc5 protocol does not have a leading pulse or space, but we encode
the first bit using a single leading pulse. For other protocols, the
leading pulse or space does not represent any bit. So, don't remove the
first bit if a leading pulse is present.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:32:38 -05:00
Sean Young
ddf9c1bb3d media: rc: clean up leader pulse/space for manchester encoding
The IR rc6 encoder sends the header using manchester encoding using 0
bits, which causes the following:

UBSAN: Undefined behaviour in drivers/media/rc/rc-ir-raw.c:247:6
shift exponent 4294967295 is too large for 64-bit type 'long long unsigned int'

So, allow the leader code to send a pulse and space and remove the unused
pulse_space_start field.

Cc: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:26:50 -05:00
Sean Young
02d742f4b2 media: lirc: lirc daemon fails to detect raw IR device
Since commit 9b6192589b ("media: lirc: implement scancode sending"),
and commit de142c3241 ("media: lirc: implement reading scancode")
the lirc features ioctl for raw IR devices advertises two modes for
sending and receiving.

The lirc daemon now fails to detect a raw IR device, both for transmit
and receive.

To fix this, do not advertise the scancode mode in the lirc features
for raw IR devices (however do keep it for scancode devices). The mode
can still be used via the LIRC_SET_{REC,SEND}_MODE ioctl.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:24:01 -05:00
Sean Young
04d0e8de8a media: lirc: add module alias for lirc_dev
Since commit a60d64b15c ("media: lirc: lirc interface should not be
a raw decoder"), there is no lirc_dev module any more. On Ubuntu 16.10,
the /etc/init.d/lirc startup script attempts to load the lirc_dev module.

Since this module does not exist any more, this script fails. Add an alias
so the correct module is loaded.

Fixes: a60d64b15c ("media: lirc: lirc interface should not be a raw decoder")

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:21:55 -05:00
Colin Ian King
8d25e15d94 media: lirc: don't kfree the uninitialized pointer txbuf
The current error exit path if ir_raw_encode_scancode fails is via the
label out_kfree which kfree's an uninitialized pointer txbuf. Fix this
by exiting via a new exit path that does not kfree txbuf.  Also exit
via this new exit path for a failed allocation of txbuf to avoid a
redundant kfree on a NULL pointer (to save a bunch of CPU cycles).

Detected by: CoverityScan, CID#1463070 ("Uninitialized pointer read")

Fixes: f81a8158d4 ("media: lirc: release lock before sleep")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-23 07:20:29 -05:00
Mauro Carvalho Chehab
6e6a8b5a38 media: replace all <spaces><tab> occurrences
There are a lot of places where sequences of space/tabs are
found. Get rid of all spaces before tabs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:15:05 -05:00
Mauro Carvalho Chehab
4a3fad709b media: fix usage of whitespaces and on indentation
On several places, whitespaces are being used for indentation,
or even at the end of the line.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04 13:12:01 -05:00
Andi Shyti
8ea636dcec media: ir-spi: add SPDX identifier
Replace the original license statement with the SPDX identifier.

Update also the copyright owner adding myself as co-owner of the
copyright.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:22:50 -05:00
Sean Young
f81a8158d4 media: lirc: release lock before sleep
There is no reason to hold the lock while we wait for the IR to transmit.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:22:24 -05:00
Sean Young
7b3aa7146e media: lirc: no need to recalculate duration
This is code existed for when drivers would send less than the whole
buffer; no driver does this any more, so this is redundant. Drivers
should return -EINVAL if they cannot send the entire buffer.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:21:49 -05:00
Sean Young
a74b2bff59 media: lirc: do not pass ERR_PTR to kfree
If memdup_user() fails, txbuf will be an error pointer and passed
to kfree.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:21:28 -05:00
Sean Young
b996157dd2 media: rc: iguanair: simplify tx loop
The TX loop is more complex than it should. Simplify it.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:20:53 -05:00
Sean Young
dde7edff35 media: lirc: when transmitting scancodes, block until transmit is done
The semantics for lirc IR transmit with raw IR is that the write call
should block until the IR is transmitted. Some drivers have no idea
when this actually is (e.g. mceusb), so there is a wait.

This is useful for userspace, as it might want to send a IR button press,
a gap of a predefined number of milliseconds, and then send a repeat
message.

It turns out that for transmitting scancodes this feature is even more
useful, as user space has no idea how long the IR is. So, maintain
the existing semantics for IR scancode transmit.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:19:57 -05:00
Sean Young
fb7ccc6180 media: rc: bang in ir_do_keyup
rc_keydown() can be called from interrupt context, by e.g. an rc scancode
driver. Since commit b2c96ba352b5 ("media: cec: move cec autorepeat
handling to rc-core"), the del_timer_sync() call is not happy about
being called in interrupt connect. del_timer() will suffice.

WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1285 del_timer_sync+0x1d/0x40
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W        4.15.0-rc1+ #1
Hardware name:                  /DG45ID, BIOS IDG4510H.86A.0135.2011.0225.1100 02/25/2011
task: ffffffffa3e10480 task.stack: ffffffffa3e00000
RIP: 0010:del_timer_sync+0x1d/0x40
RSP: 0018:ffff8b396bc03db0 EFLAGS: 00010046
RAX: 0000000080010000 RBX: ffff8b394d70e410 RCX: 0000000000000073
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8b394d70e410
RBP: 0000000000000001 R08: ffffffffc0616000 R09: ffff8b396bfa3000
R10: 0000000000000000 R11: 0000000000000390 R12: ffff8b394f003800
R13: 0000000000000000 R14: ffff8b3771c19630 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8b396bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1944469000 CR3: 00000001ebe09000 CR4: 00000000000006f0
Call Trace:
 <IRQ>
 ir_do_keyup.part.5+0x22/0x90 [rc_core]
 rc_keyup+0x37/0x50 [rc_core]
 usb_rx_callback_intf0+0x79/0x90 [imon]
 __usb_hcd_giveback_urb+0x90/0x130
 uhci_giveback_urb+0xab/0x250
 uhci_scan_schedule.part.34+0x806/0xb00
 uhci_irq+0xab/0x150
 usb_hcd_irq+0x22/0x30
 __handle_irq_event_percpu+0x3a/0x180
 handle_irq_event_percpu+0x30/0x70
 handle_irq_event+0x27/0x50
 handle_fasteoi_irq+0x6b/0x110
 handle_irq+0xa5/0x100
 do_IRQ+0x41/0xc0
 common_interrupt+0x96/0x96
 </IRQ>
RIP: 0010:cpuidle_enter_state+0x9a/0x2d0
RSP: 0018:ffffffffa3e03e88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
RAX: ffff8b396bc1a000 RBX: 00000010da7bcd63 RCX: 00000010da7bccf6
RDX: 00000010da7bcd63 RSI: 00000010da7bcd63 RDI: 0000000000000000
RBP: ffff8b394f587400 R08: 0000000000000000 R09: 0000000000000002
R10: ffffffffa3e03e48 R11: 0000000000000390 R12: 0000000000000003
R13: ffffffffa3ebf018 R14: 0000000000000000 R15: 00000010da7ba772
 ? cpuidle_enter_state+0x8d/0x2d0
 do_idle+0x17b/0x1d0
 cpu_startup_entry+0x6f/0x80
 start_kernel+0x4a7/0x4c7
 secondary_startup_64+0xa5/0xb0
Code: e7 5b 5d 41 5c e9 84 88 05 00 0f 1f 40 00 66 66 66 66 90 65 8b 05 e4 6f ef 5c a9 00 00 0f 00 53 48 89 fb 74 16 f6 47 22 20 75 10 <0f> ff 48 89 df e8 89 f1 ff ff 85 c0 79 0e f3 90 48 89 df e8 7b

Fixes: b2c96ba352b5 ("media: cec: move cec autorepeat handling to rc-core")

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:19:14 -05:00
Sean Young
e607486c4c media: imon: remove unused function tv2int
Since commit 9c7fd60e951d ("media: rc: Replace timeval with ktime_t in
imon.c"), the function tv2int() is no longer used. Remove it.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:18:39 -05:00
Sean Young
6a489f760e media: imon: auto-config ffdc 26 device
Another device with the 0xffdc device id, this one with 0x26 in the
config byte. Its an iMON Inside + iMON IR. It does respond to rc-6,
but seems to produce random garbage rather than a scancode.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:18:11 -05:00
Mauro Carvalho Chehab
c3a3d1d6b8 media: fix SPDX comment on some header files
The agreed format is to use /* */ comments inside header
files. Unfortunately, I ended by using // on a few ones.

Reported-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18 15:15:53 -05:00
Sean Young
57c642cb45 media: cec: move cec autorepeat handling to rc-core
CEC autorepeat is different than other protocols. Autorepeat is triggered
by the first repeated user control pressed CEC message, rather than a
fixed REP_DELAY.

This change also does away with the KEY_UP event directly after the first
KEY_DOWN event, which was used to stop autorepeat from starting.

See commit a9a249a2c9 ("media: cec: fix remote control passthrough")
for the original change.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:30 -05:00
Sean Young
6d4a36d183 media: imon: auto-config ffdc 30 device
Another device with the 0xffdc device id, this one with 0x30 in the
config byte. Its an iMON VFD + iMON IR (it does not understand rc6).

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:29 -05:00
Arvind Yadav
621fa19a24 media: winbond-cir: Fix pnp_irq's error checking for wbcir_probe
The pnp_irq() function returns -1 if an error occurs.
pnp_irq() error checking for zero is not correct.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:28 -05:00
Chunyan Zhang
1edba6484b media: rc: Replace timeval with ktime_t in imon.c
This patch changes the 32-bit time type (timeval) to the 64-bit one
(ktime_t), since 32-bit time types will break in the year 2038.

I use ktime_t instead of all uses of timeval in imon.c

This patch also changes do_gettimeofday() to ktime_get() accordingly,
since ktime_get returns a ktime_t, but do_gettimeofday returns a
struct timeval, and the other reason is that ktime_get() uses
the monotonic clock.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:27 -05:00
Sean Young
4957133fe3 media: lirc: improve locking
Once rc_unregister_device() has been called, no driver function
should be called.

This prevents some nasty race conditions with an ioctl calls
driver functions when the driver specific data has been freed.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:26 -05:00
Sean Young
7e45d660e4 media: lirc: allow lirc device to be opened more than once
This makes it possible for lircd to read from a lirc chardev, and not
keep it busy.

Note that this changes the default for timeout reports to on. lircd
already enables timeout reports when it opens a lirc device, leaving
them on until the next reboot.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-14 10:35:25 -05:00