Commit Graph

195366 Commits

Author SHA1 Message Date
Thomas Petazzoni
15f594563d net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
This commit implements the ->ndo_do_ioctl() operation so that the
PHY-related ioctl() calls can work from userspace, which allows
applications like mii-tool or mii-diag to do their job.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:31:01 -04:00
Thomas Petazzoni
7140860291 net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
This commit fixes a long-standing bug that has been reported by many
users: on some Armada 370 platforms, only the network interface that
has been used in U-Boot to tftp the kernel works properly in
Linux. The other network interfaces can see a 'link up', but are
unable to transmit data. The reports were generally made on the Armada
370-based Mirabox, but have also been given on the Armada 370-RD
board.

The network MAC in the Armada 370/XP (supported by the mvneta driver
in Linux) has a functionality that allows it to continuously poll the
PHY and directly update the MAC configuration accordingly (speed,
duplex, etc.). The very first versions of the driver submitted for
review were using this hardware mechanism, but due to this, the driver
was not integrated with the kernel phylib. Following reviews, the
driver was changed to use the phylib, and therefore a software based
polling. In software based polling, Linux regularly talks to the PHY
over the MDIO bus, and sees if the link status has changed. If it's
the case then the adjust_link() callback of the driver is called to
update the MAC configuration accordingly.

However, it turns out that the adjust_link() callback was not
configuring the hardware in a completely correct way: while it was
setting the speed and duplex bits correctly, it wasn't telling the
hardware to actually take into account those bits rather than what the
hardware-based PHY polling mechanism has concluded. So, in fact the
adjust_link() callback was basically a no-op.

However, the network happened to be working because on the network
interfaces used by U-Boot for tftp on Armada 370 platforms because the
hardware PHY polling was enabled by the bootloader, and left enabled
by Linux. However, the second network interface not used for tftp (or
both network interfaces if the kernel is loaded from USB, NAND or SD
card) didn't had the hardware PHY polling enabled.

This patch fixes this situation by:

 (1) Making sure that the hardware PHY polling is disabled by clearing
     the MVNETA_PHY_POLLING_ENABLE bit in the MVNETA_UNIT_CONTROL
     register in the driver ->probe() function.

 (2) Making sure that the duplex and speed selections made by the
     adjust_link() callback are taken into account by clearing the
     MVNETA_GMAC_AN_SPEED_EN and MVNETA_GMAC_AN_DUPLEX_EN bits in the
     MVNETA_GMAC_AUTONEG_CONFIG register.

This patch has been tested on Armada 370 Mirabox, and now both network
interfaces are usable after boot.

[ Problem introduced by commit c5aff18 ("net: mvneta: driver for
  Marvell Armada 370/XP network unit") ]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Jochen De Smet <jochen.armkernel@leahnim.org>
Cc: Peter Sanford <psanford@nearbuy.io>
Cc: Ethan Tuttle <ethan@ethantuttle.com>
Cc: Chény Yves-Gael <yves@cheny.fr>
Cc: Ryan Press <ryan@presslab.us>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: vdonnefort@lacie.com
Cc: stable@vger.kernel.org
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Tested-by: Yves-Gael Cheny <yves@cheny.fr>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:31:01 -04:00
Jon Mason
dfafb73f35 icplus: Use netif_running to determine device state
Remove the __LINK_STATE_START check to verify the device is running, in
favor of netif_running().  netif_running() performs the same check of
__LINK_STATE_START, so the code should behave the same.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:27:32 -04:00
Vineet Gupta
27082ee1b9 ethernet/arc/arc_emac: Fix huge delays in large file copies
copying large files to a NFS mounted host was taking absurdly large
time.

Turns out that TX BD reclaim had a sublte bug.

Loop starts off from @txbd_dirty cursor and stops when it hits a BD
still in use by controller. However when it stops it needs to keep the
cursor at that very BD to resume scanning in next iteration. However it
was erroneously incrementing the cursor, causing the next scan(s) to
fail too, unless the BD chain was completely drained out.

[ARCLinux]$ ls -l -sh /disk/log.txt
 17976 -rw-r--r--    1 root     root       17.5M Sep  /disk/log.txt

========== Before =====================
[ARCLinux]$ time cp /disk/log.txt /mnt/.
real    31m 7.95s
user    0m 0.00s
sys     0m 0.10s

========== After =====================
[ARCLinux]$ time cp /disk/log.txt /mnt/.
real    0m 24.33s
user    0m 0.00s
sys     0m 0.19s

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com> (commit_signer:3/4=75%)
Cc: "David S. Miller" <davem@davemloft.net> (commit_signer:3/4=75%)
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: arc-linux-dev@synopsys.com
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:25:10 -04:00
Linus Torvalds
a09e9a7a4b Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm tree changes from Dave Airlie:
 "This is the main drm pull request, I have some overlap with sound and
  arm-soc, the sound patch is acked and may conflict based on -next
  reports but should be a trivial fixup, which I'll leave to you!

  Highlights:

   - new drivers:

     MSM driver from Rob Clark

   - non-drm:

     switcheroo and hdmi audio driver support for secondary GPU
     poweroff, so drivers can use runtime PM to poweroff the GPUs.  This
     can save 5 or 6W on some optimus laptops.

   - drm core:

     combined GEM and TTM VMA manager
     per-filp mmap permission tracking
     initial rendernode support (via a runtime enable for now, until we get api stable),
     remove old proc support,
     lots of cleanups of legacy code
     hdmi vendor infoframes and 4k modes
     lots of gem/prime locking and races fixes
     async pageflip scaffolding
     drm bridge objects

   - i915:

     Haswell PC8+ support and eLLC support, HDMI 4K support, initial
     per-process VMA pieces, watermark reworks, convert to generic hdmi
     infoframes, encoder reworking, fastboot support,

   - radeon:

     CIK PM support, remove 3d blit code in favour of DMA engines,
     Berlin GPU support, HDMI audio fixes

   - nouveau:

     secondary GPU power down support for optimus laptops, lots of
     fixes, use MSI, VP3 engine support

   - exynos:

     runtime pm support for g2d, DT support, remove non-DT,

   - tda998x i2c driver:

     lots of fixes for sync issues

   - gma500:

     lots of cleanups

   - rcar:

     add LVDS support, fbdev emulation,

   - tegra:

     just minor fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits)
  drm/exynos: Fix build error with exynos_drm_connector.c
  drm/exynos: Remove non-DT support in exynos_drm_fimd
  drm/exynos: Remove non-DT support in exynos_hdmi
  drm/exynos: Remove non-DT support in exynos_drm_g2d
  drm/exynos: Remove non-DT support in exynos_hdmiphy
  drm/exynos: Remove non-DT support in exynos_ddc
  drm/exynos: Make Exynos DRM drivers depend on OF
  drm/exynos: Consider fallback option to allocation fail
  drm/exynos: fimd: move platform data parsing to separate function
  drm/exynos: fimd: get signal polarities from device tree
  drm/exynos: fimd: replace struct fb_videomode with videomode
  drm/exynos: check a pixel format to a particular window layer
  drm/exynos: fix fimd pixel format setting
  drm/exynos: Add NULL pointer check
  drm/exynos: Remove redundant error messages
  drm/exynos: Add missing of.h header include
  drm/exynos: Remove redundant NULL check in exynos_drm_buf
  drm/exynos: add device tree support for rotator
  drm/exynos: Add missing includes
  drm/exynos: add runtime pm interfaces to g2d driver
  ...
2013-09-05 10:17:26 -07:00
Linus Torvalds
9ab073bc45 fbdev changes for 3.12:
* Improvements to da8xx-fb to make it support v2 of the LCDC IP, used e.g. in
   BeagleBone
 * Himax HX8369 controller support
 * Various small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKB9vAAoJEPo9qoy8lh71dqkP/AgEljWrEKumJ6KQYLjxGEQM
 RseTYKaNE78TkPX5p4DcA2rJ0Ud/yK/swelZvHfnq+6yTxUiuwsHDAPcgrMf27NM
 yWWTW0gJRrs7jbHF7sIQkPbww56Irjz7uzUfOoNRqajgf51+mB3olAhTUn9tE3Pf
 PW9u5M5b904VnT0VKASEUB9SUtx5izWKP9Yyy7QG8WF++zp4BHfmO7+8kx46cE0l
 WFAQL7JrvtzI2yVcnnkfDRpmHOunbupIGOAT79s3KlK226SHNRi3wd6w6zDTudjj
 sEMJLDpipKYliT+yzwgHmuHfDTi+gx6a36bTMf9lXp+KZKYEjNlWnYKKHdkdtk7Z
 nYlUagu+8tOUsZGy5dOyMkbeYMMfpcBlN1VjMDBIs1kPc0psg15wPznLdnPa5rau
 Ag0Z7GPHvy8ucFBsfqp1Sgsi1QMSqWgkcCh55BAMID58A7ELPhHz9NpaFt9KGMEy
 EKoNPQmTjIosgEQDdbayqjBwBqK1O0Q8MPPFGiDCwX37XppgZ4mflSz3NfDpwN+J
 +J+C3y2Bn2qzYPUzy3vOoohoWvtxsGnteNyX3D/Yrk7I4/4IWdI0maTVMv9yq//D
 /uBt+OxEY0ODkfC+yhhKT6P5zNBqsoWa16fqDdx3WDV7xoCsVq6dKkhaQd/zEr0Z
 Yjtcw3ZRyGLQgX75Zo+B
 =Kr2i
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used
   eg in BeagleBone
 - Himax HX8369 controller support
 - Various small fixes and cleanups

* tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: da8xx-fb: fix the polarities of the hsync/vsync pulse
  video: da8xx-fb: support lcdc v2 timing register expansion
  video: da8xx-fb: fixing timing off by one errors
  video: da8xx-fb fixing incorrect porch mappings
  video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource
  fbmem: move EXPORT_SYMBOL annotation next to symbol declarations
  drivers: video: fbcmap: remove the redundency and incorrect checkings
  video: mxsfb: simplify use of devm_ioremap_resource
  Release efifb's colormap in efifb_destroy()
  at91/avr32/atmel_lcdfb: prepare clk before calling enable
  video: exynos: Ensure definitions match prototypes
  OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file
  OMAPDSS: HDMI: Fix possible NULL reference
  video: da8xx-fb: adding am33xx as dependency
  video: da8xx-fb: let compiler decide what to inline
  video: da8xx-fb: make clock naming consistent
  video: da8xx-fb: set upstream clock rate (if reqd)
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: use devres
  ...
2013-09-05 09:49:32 -07:00
Jason Wang
7bf6630523 tuntap: orphan frags before trying to set tx timestamp
sock_tx_timestamp() will clear all zerocopy flags of skb which may lead the
frags never to be orphaned. This will break guest to guest traffic when zerocopy
is enabled. Fix this by orphaning the frags before trying to set tx time stamp.

The issue were introduced by commit eda2977291
(tun: Support software transmit time stamping).

Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:31 -04:00
Jason Wang
4bfb0513ff tuntap: purge socket error queue on detach
Commit eda2977291
(tun: Support software transmit time stamping) will queue skbs into error queue
when tx stamping is enabled. But it forgets to purge the error queue during
detach. This patch fixes this.

Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:31 -04:00
Michal Schmidt
df95fc44c0 qlcnic: use standard NAPI weights
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT")
netif_napi_add() produces an error message if a NAPI poll weight
greater than 64 is requested.

qlcnic requests the weight as large as 256 for some of its rings, and
smaller values for other rings. For instance in qlcnic_82xx_napi_add()
I think the intention was to give the tx+rx ring a bigger weight than
to rx-only rings, but it's actually doing the opposite. So I'm assuming
the weights do not really matter much.

Just use the standard NAPI weights for all rings.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:31 -04:00
Ariel Elior
60cad4e67b bnx2x: VF RSS support - VF side
In this patch capabilities are added to the Vf driver to request
multiple queues over the VF PF channel, and the logic for requesting
rss configuration for said queues.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilong Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:31 -04:00
Ariel Elior
b9871bcfd2 bnx2x: VF RSS support - PF side
This patch adds support for Receive Side Scaling for queues of
Virtual Functions on the PF side. This includes support for the
requests for multiple queues from VF drivers, configuration of the
HW for multiple queues per VF, and support for rss configuration
of said queues.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:31 -04:00
Joseph Gasparakis
53cf527513 vxlan: Notify drivers for listening UDP port changes
This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and
ndo_del_rx_vxlan_port().

Drivers can get notifications through the above functions about changes
of the UDP listening port of VXLAN. Also, when physical ports come up,
now they can call vxlan_get_rx_port() in order to obtain the port number(s)
of the existing VXLAN interface in case they already up before them.

This information about the listening UDP port would be used for VXLAN
related offloads.

A big thank you to John Fastabend (john.r.fastabend@intel.com) for his
input and his suggestions on this patch set.

CC: John Fastabend <john.r.fastabend@intel.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:44:30 -04:00
Linus Torvalds
eced5a0a5a OMAP specific fbdev changes for 3.12:
* Change the OMAP board files to use the new OMAP display drivers
 * Remove all the old drivers, and the related auxiliary code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKCBzAAoJEPo9qoy8lh71yy4QAIONKG1wqN93oGqhWlcSHWIe
 Lg9YIqYk7FDfroTVunGtm0nImJmJ9yEVkxAXBRJbVb5gwvlWhpUIrhc6OahksXP8
 rVxuwb+U9LdwWkskamv0UsstvIMMSPgtsuvAKeBaBz9jm0Yu+TbrZvnCv0AyKlKE
 IscOlDycG9ENbUrhIzu9utPNlvE03hqqgn8RVYvjoj4hQ8BmOBSOGGfuofbITJAS
 8wY4nAoRwU+rV3dWQgNAvFyQ/dvsnZ4nYNLJhnf6eaB9HzpfdtFUrOF/rAlJU8nG
 RrMt5oykQT9a6VKxNryoFqih2q+FPrXBARVDvGWxn6w+q2RHrw5eteGcemegzTga
 OSGyhLpGbT/5cvbQtfaHX/Rcrdy9CNj1FMy6Y/xMvkHeqiy+0Eo6l+Nh70cvHzrx
 b+vonkSornngymt6QSXyQwXkP1PbO9ZEsZbeK+wjrqrRKL5KRvQ/HGz3uYv7CiMX
 A6Q51RHDCDoelVAn9JORIEDQukh3R78XNwPbrjdRB1pNE3Z51rmSpolKsQbmPF9m
 073p4wQ91qOji4eIdxPhuN7NuAexs42iAIZNQnZ2gMFWWSwHLlNinaY2Uu+Fs2it
 wLyKabqvi1AeFHcARzYDuHzVPrRb+6exHokud6998M9zEvFAGCoKFcsxoEvvL5/u
 gwRjFHmMzz4caPVct0UU
 =Hj7U
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP specific fbdev changes from Tomi Valkeinen:
 "I've got this pull request separate from the main fbdev pull request,
  as this contains a bunch of OMAP board file changes and thus could
  possibly be rejected in case of bad conflicts.

  The removal of the old display drivers depend on the board file
  changes, so Tony Lindgren suggested taking them together via fbdev
  tree.  These are in linux-next, and also Tony didn't see any conflicts
  with any of the branches he had, so they should go in clean.

   - Change the OMAP board files to use the new OMAP display drivers

   - Remove all the old drivers, and the related auxiliary code"

* tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: rename omap_dss_device's 'device' field to 'dst'
  OMAPDSS: rename omap_dss_device's 'output' to 'src'
  OMAPDSS: DSS: remove legacy dss bus support
  OMAPDSS: RFBI: remove code related to old panel model
  OMAPDSS: VENC: remove code related to old panel model
  OMAPDSS: SDI: remove code related to old panel model
  OMAPDSS: DSI: remove code related to old panel model
  OMAPDSS: HDMI: remove code related to old panel model
  OMAPDSS: DPI: remove code related to old panel model
  OMAPDSS: remove all old panel drivers
  OMAPDSS: DPI: change regulator handling
  OMAPDSS: SDI: change regulator handling
  OMAPDSS: fix DPI and SDI device ids
  OMAPDSS: remove omap_dss_device->channel field
  OMAPDSS: RFBI: Mark RFBI as broken
  ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
  ARM: OMAP: AM3517EVM: use new display drivers
  ARM: OMAP: Zoom: use new display drivers
  ARM: OMAP: Pandora: use new display drivers
  ARM: OMAP: OMAP3EVM: use new display drivers
  ...
2013-09-05 09:44:03 -07:00
Bjørn Mork
eef23b5398 net: usbnet: update addr_assign_type if appropriate
This module generates a common default address on init,
using eth_random_addr. Set addr_assign_type to let
userspace know the address is random unless it was
overridden by the minidriver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:43:38 -04:00
govindarajulu.v
001e1c1d5e driver/net: enic: update enic maintainers and driver
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:39:33 -04:00
govindarajulu.v
4a50ddfda7 driver/net: enic: Exposing symbols for Cisco's low latency driver
This patch exposes symbols for usnic low latency driver that can be used to
register and unregister vNics as well to traverse the resources on vNics.

Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:39:33 -04:00
govindarajulu.v
624dbf55a3 driver/net: enic: Try DMA 64 first, then failover to DMA
In servers with more than 1.1 TB of RAM, the existing 40/32 bit DMA
could cause failure as the DMA-able address could go outside the range
addressable using 40/32 bits.

The following patch first tried 64 bit DMA if possible, failover to 32
bit.

Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:39:33 -04:00
govindarajulu.v
bf751ba802 driver/net: enic: record q_number and rss_hash for skb
The following patch sets the skb->rxhash and skb->q_number.
This is used by RPS and RFS. Kernel can make use of hw provided hash
instead of calculating the hash.

Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:39:32 -04:00
govindarajulu.v
822473b6c4 driver/net: enic: Add multi tx support for enic
The following patch adds multi tx support for enic.

Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 12:39:32 -04:00
Linus Torvalds
7c049d0869 Main batch of InfiniBand/RDMA changes for 3.12 merge window:
- Large ocrdma HW driver update: add "fast register" work requests,
    fixes, cleanups
  - Add receive flow steering support for raw QPs
  - Fix IPoIB neighbour race that leads to crash
  - iSER updates including support for using "fast register" memory
    registration
  - IPv6 support for iWARP
  - XRC transport fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABCAAGBQJSJ2drAAoJEENa44ZhAt0hpaUQAJ6EdNFh2bon9c/uHz1lw58A
 DIvVniUwWGCRgpbsv/IxZDBVX3G5IKSW6U0Y3/JxMXeIF/cGOUaJZgCeKPiYNoNA
 yxiEGI0ffvpWGAJUHSE2ARJKvgdjrpqGo5UzsiinEhJx3uczeZBcooosQTWDXxya
 /qSWH3rARkic9abuaizkuVzdWEjWLNjyh2bWnqJ4HNZplE8RfSK4bk8QtvEmpn9Z
 dNBKFFujysfHHGflLuSkFAkP1NdqlZeQ4/2uzD23p3YofbJwrJoJNFxkCfx3UUml
 fjPptlhU6kZMCwSXsD24tAV8Exr/CCgmxriFIN/Xqhu4gvBELScRPPqPqFquhtXI
 pP5hbG9/9P5C8BLgABe6IAvlU1lUyraR67bA78nYeKm2JpATE6T23Nx7nUgMgzRS
 Ee3ZvZGZvk8BZ7zyQh8D7Aig1XOtzqA9D5nLUyEJ2aRPSnXJxyi0S3Fbn0vmOMb7
 8CF+99KECG8fb4sjNAjX5Zm48+7WJd+WCd3t89oUzCbJKKpa1Chctph8VH7dEfke
 JkEjOJhuAGqau4bIMZ2nZkISoTfSD7vbjPAxMPASS7fOdR7fe6AqDn9/LMAhWjpw
 4Fb25ZW7rYf9+6jqA4MgMRFCTkXhR25FsqUUL9h8NaWai4F1dfVoZHbRvGIZah5n
 5HQupXGquwES4y6pvHjc
 =rabl
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull main batch of InfiniBand/RDMA changes from Roland Dreier:
 - Large ocrdma HW driver update: add "fast register" work requests,
   fixes, cleanups
 - Add receive flow steering support for raw QPs
 - Fix IPoIB neighbour race that leads to crash
 - iSER updates including support for using "fast register" memory
   registration
 - IPv6 support for iWARP
 - XRC transport fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (54 commits)
  RDMA/ocrdma: Fix compiler warning about int/pointer size mismatch
  IB/iser: Fix redundant pointer check in dealloc flow
  IB/iser: Fix possible memory leak in iser_create_frwr_pool()
  IB/qib: Move COUNTER_MASK definition within qib_mad.h header guards
  RDMA/ocrdma: Fix passing wrong opcode to modify_srq
  RDMA/ocrdma: Fill PVID in UMC case
  RDMA/ocrdma: Add ABI versioning support
  RDMA/ocrdma: Consider multiple SGES in case of DPP
  RDMA/ocrdma: Fix for displaying proper link speed
  RDMA/ocrdma: Increase STAG array size
  RDMA/ocrdma: Dont use PD 0 for userpace CQ DB
  RDMA/ocrdma: FRMA code cleanup
  RDMA/ocrdma: For ERX2 irrespective of Qid, num_posted offset is 24
  RDMA/ocrdma: Fix to work with even a single MSI-X vector
  RDMA/ocrdma: Remove the MTU check based on Ethernet MTU
  RDMA/ocrdma: Add support for fast register work requests (FRWR)
  RDMA/ocrdma: Create IRD queue fix
  IB/core: Better checking of userspace values for receive flow steering
  IB/mlx4: Add receive flow steering support
  IB/core: Export ib_create/destroy_flow through uverbs
  ...
2013-09-05 09:39:27 -07:00
Linus Torvalds
00341b5301 Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Highlights:

   - OF and ACPI helpers are now included in the core, and not in
     external files anymore.  This removes dependency problems for
     modules and is cleaner, in general.
   - mv64xxx-driver gains fifo usage to support mv78230
   - imx-driver overhaul to support VF610
   - various cleanups, most notably related to devm_* and CONFIG_PM
     usage
   - driver bugfixes and smaller feature additions"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: rcar: add rcar-H2 support
  i2c: sirf: retry 3 times as sometimes we get random noack and timeout
  i2c: sirf: support reverse direction of address
  i2c: sirf: fix the typo for setting bitrate to less than 100k
  i2c: sirf: we need to wait I2C_RESET status in resume
  i2c: sirf: reset i2c controller early after we get a noack
  i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPI
  i2c: designware: make HCNT/LCNT values configurable
  i2c: mpc: cleanup clock API use
  i2c: pnx: fix error return code in i2c_pnx_probe()
  i2c: ismt: add error return code in probe()
  i2c: mv64xxx: fix typo in binding documentation
  i2c: imx: use exact SoC revision to document binding
  i2c: move ACPI helpers into the core
  i2c: move OF helpers into the core
  i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889)
  i2c: mv64xxx: Add I2C Transaction Generator support
  i2c: powermac: fix return path on error
  Documentation: i2c: Fix example in instantiating-devices
  i2c: tiny-usb: do not use stack as URB transfer_buffer
  ...
2013-09-05 09:31:03 -07:00
Linus Torvalds
45d9a2220f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "Unfortunately, this merge window it'll have a be a lot of small piles -
  my fault, actually, for not keeping #for-next in anything that would
  resemble a sane shape ;-/

  This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
  cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
  components) + several long-standing patches from various folks.

  There definitely will be a lot more (starting with Miklos'
  check_submount_and_drop() series)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  direct-io: Handle O_(D)SYNC AIO
  direct-io: Implement generic deferred AIO completions
  add formats for dentry/file pathnames
  kvm eventfd: switch to fdget
  powerpc kvm: use fdget
  switch fchmod() to fdget
  switch epoll_ctl() to fdget
  switch copy_module_from_fd() to fdget
  git simplify nilfs check for busy subtree
  ibmasmfs: don't bother passing superblock when not needed
  don't pass superblock to hypfs_{mkdir,create*}
  don't pass superblock to hypfs_diag_create_files
  don't pass superblock to hypfs_vm_create_files()
  oprofile: get rid of pointless forward declarations of struct super_block
  oprofilefs_create_...() do not need superblock argument
  oprofilefs_mkdir() doesn't need superblock argument
  don't bother with passing superblock to oprofile_create_stats_files()
  oprofile: don't bother with passing superblock to ->create_files()
  don't bother passing sb to oprofile_create_files()
  coh901318: don't open-code simple_read_from_buffer()
  ...
2013-09-05 08:50:26 -07:00
Linus Torvalds
2386a3b0fb Merge branch 'ipmi'
Merge IPMI fixes from:
 "A few things for 3.12 from various people"

* emailed patches from Corey Minyard <minyard@acm.org>:
  BMC support for PARISC machines
  Add MODULE_ALIAS for autoloading ipmi driver on ACPI systems
  ipmi: Initialize locals to avoid warning
  ipmi: info leak in compat_ipmi_ioctl()
2013-09-05 08:34:38 -07:00
Thomas Bogendoerfer
fdbeb7de70 BMC support for PARISC machines
The last line of PARISC machines (C8000, RP34x0, etc.) have a BMC for
controlling temperature, fan speed and other stuff.  The BMC is
connected via a special bus and listed in the firmware device tree.
This change adds support for these BMCs to the IPMI driver.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05 08:34:32 -07:00
Jordan_Hargrave@Dell.com
a798e2d2d7 Add MODULE_ALIAS for autoloading ipmi driver on ACPI systems
I'd submitted this about a year ago but it never made it upstream.

The latest versions of the kernel drivers for ipmi can use ACPI to
determine the type of BMC device used in the system.  The following
patch adds a module alias so that udev will autoload the ipmi_si driver.

Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05 08:34:32 -07:00
Corey Minyard
f0ba93907b ipmi: Initialize locals to avoid warning
A couple of variables were getting warnings about being uninitialized.
It was a false warning, but initialize them, anyway.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05 08:34:31 -07:00
Dan Carpenter
fa7df37b58 ipmi: info leak in compat_ipmi_ioctl()
On x86_64 there is a 4 byte hole between ->recv_type and ->addr.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05 08:34:31 -07:00
Benjamin Herrenschmidt
91c2beb56b Merge remote-tracking branch 'agust/next' into next
From Anatolij:
<<
There are cleanups for some mpc5121 specific drivers and DTS files
in preparation to switch mpc5121 clock support to a clock driver
based on common clock framework. Additionally Sebastian fixed the
mpc52xx PIC driver so that it builds when using older gcc versions.
>>
2013-09-05 16:43:30 +10:00
Sachin Kamat
6914262aa5 drm/exynos: Fix build error with exynos_drm_connector.c
exynos_drm_connector.c now uses videomode helper API. Hence select
VIDEOMODE_HELPERS at DRM_EXYNOS level itself instead of at
DRM_EXYNOS_FIMD to avoid the following compilation error when FIMD
is not selected (introduced by commit cf796235a6 "drm/exynos: fimd:
replace struct fb_videomode with videomode"):
drivers/built-in.o: In function `exynos_drm_connector_get_modes':
drivers/gpu/drm/exynos/exynos_drm_connector.c:86:
undefined reference to `drm_display_mode_from_videomode'

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:46 +09:00
Sachin Kamat
2d3f173cf7 drm/exynos: Remove non-DT support in exynos_drm_fimd
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:46 +09:00
Sachin Kamat
88c4981542 drm/exynos: Remove non-DT support in exynos_hdmi
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:46 +09:00
Sachin Kamat
61c48fbf5f drm/exynos: Remove non-DT support in exynos_drm_g2d
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:46 +09:00
Sachin Kamat
459e97ee34 drm/exynos: Remove non-DT support in exynos_hdmiphy
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:45 +09:00
Sachin Kamat
f61d5f2984 drm/exynos: Remove non-DT support in exynos_ddc
Since commit 383ffda2fa ("ARM: EXYNOS: no more support non-DT
for EXYNOS SoCs"), Exynos platform is DT only. Hence remove
all the conditional macros and make the driver DT only.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:45 +09:00
Sachin Kamat
eccbf0d897 drm/exynos: Make Exynos DRM drivers depend on OF
Exynos is a DT-only platform. Add this info to Kconfig.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:45 +09:00
Vikas Sajjan
3fec4532d1 drm/exynos: Consider fallback option to allocation fail
To address the case where physically contiguous memory
MAY NOT be a mandatory requirement for framebuffer for
the application calling exynos_drm_gem_dumb_create,
the patch adds a feature to get non physically contiguous
memory for framebuffer, if physically contiguous memory
allocation fails and if IOMMU is supported.

Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Arun Kumar <arun.kk@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:45 +09:00
Andrzej Hajda
562ad9f4a3 drm/exynos: fimd: move platform data parsing to separate function
The patch moves platfrom_data and device tree parsing
to separate function.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:44 +09:00
Andrzej Hajda
b063f4af84 drm/exynos: fimd: get signal polarities from device tree
The patch adds code to get signal polarization setting
from device tree display-timings node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:44 +09:00
Andrzej Hajda
111e6055d4 drm/exynos: fimd: replace struct fb_videomode with videomode
The patch replaces all occurrences of struct fb_videomode by
more accurate struct videomode. The change allows to remove
mode conversion function and simplifies clock divider calculation.
Clock configuration is moved to separate function.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:44 +09:00
Inki Dae
5cc4621a17 drm/exynos: check a pixel format to a particular window layer
This patch checks if a requested window supports alpha channel or not.

In case of s3c64xx, window 0 doesn't support alpha channel so if
the request pixel format is ARGB8888 then change it to XRGB8888.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-09-05 13:43:44 +09:00
Inki Dae
a4f38a80f6 drm/exynos: fix fimd pixel format setting
This patch fixes wrong pixel format setting.

A pixel format is decided according to bpp and depth, or user-requested
format but fimd driver considered only bpp value to decide a proper pixel
format. So this patch makes a proper pixel format to be set according
to drm_framebuffer's pixel_format which is set by addfb with bpp and
depth, or addfb2 with user-requested format.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-09-05 13:43:43 +09:00
Sachin Kamat
4db7fcdf59 drm/exynos: Add NULL pointer check
devm_kzalloc can fail. Hence check the pointer to avoid NULL pointer
dereferencing.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:43 +09:00
Sachin Kamat
38bb5253a9 drm/exynos: Remove redundant error messages
kzalloc already has built-in error messages. Hence remove
additional ones.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:43 +09:00
Sachin Kamat
3f1c781d93 drm/exynos: Add missing of.h header include
Add of.h explicitly for of_* APIs.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:43 +09:00
Sachin Kamat
ca7c6220bd drm/exynos: Remove redundant NULL check in exynos_drm_buf
kfree handles null pointers. Hence this check is not necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:42 +09:00
Chanho Park
319477f35e drm/exynos: add device tree support for rotator
The exynos4 platform is only dt-based since 3.10, we should convert driver data
and ids to dt-based parsing methods. The rotator driver has a limit table to get
size limit of input picture. Each SoCs has slightly different limit value
compared with any others.
For example, exynos4210's max_size of RGB888 is 16k x 16k. But, others have
8k x 8k. Another example the exynos5250 should have multiple of 2 pixel size
for its X/Y axis. Thus, we should keep different tables for each of them.
This patch also includes desciptions of each nodes for the rotator and specifies
a example how to bind it.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:42 +09:00
Mark Brown
e30655d061 drm/exynos: Add missing includes
Ensure that all externally accessed functions are correctly prototyped
when defined in each file by making sure the headers with the protoypes
are included in the file with the definition.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:42 +09:00
Inki Dae
b10d6350a5 drm/exynos: add runtime pm interfaces to g2d driver
This patch makes g2d power domain and clock to be controlled
through pm runtime interfaces instead of controlling them
respectively.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-09-05 13:43:42 +09:00
Vikas Sajjan
a1bfacf400 drm/exynos: Add fallback option to get non physically contiguous memory for fb
While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0

To address the cases where physically contiguous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
contiguous memory for fb if physically contiguous memory allocation fails
and if IOMMU is supported.

Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Arun Kumar <arun.kk@samsung.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05 13:43:42 +09:00
Linus Torvalds
ae7a835cc5 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Gleb Natapov:
 "The highlights of the release are nested EPT and pv-ticketlocks
  support (hypervisor part, guest part, which is most of the code, goes
  through tip tree).  Apart of that there are many fixes for all arches"

Fix up semantic conflicts as discussed in the pull request thread..

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits)
  ARM: KVM: Add newlines to panic strings
  ARM: KVM: Work around older compiler bug
  ARM: KVM: Simplify tracepoint text
  ARM: KVM: Fix kvm_set_pte assignment
  ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256
  ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs
  ARM: KVM: vgic: fix GICD_ICFGRn access
  ARM: KVM: vgic: simplify vgic_get_target_reg
  KVM: MMU: remove unused parameter
  KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate()
  KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls
  KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX
  KVM: x86: update masterclock when kvmclock_offset is calculated (v2)
  KVM: PPC: Book3S: Fix compile error in XICS emulation
  KVM: PPC: Book3S PR: return appropriate error when allocation fails
  arch: powerpc: kvm: add signed type cast for comparation
  KVM: x86: add comments where MMIO does not return to the emulator
  KVM: vmx: count exits to userspace during invalid guest emulation
  KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp
  kvm: optimize away THP checks in kvm_is_mmio_pfn()
  ...
2013-09-04 18:15:06 -07:00
Linus Torvalds
cf39c8e535 Features:
- Xen Trusted Platform Module (TPM) frontend driver - with the backend in MiniOS.
  - Scalability improvements in event channel.
  - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy)
 Bug-fixes:
  - Make the 1:1 mapping work during early bootup on selective regions.
  - Add scratch page to balloon driver to deal with unexpected code still holding
    on stale pages.
  - Allow NMIs on PV guests (64-bit only)
  - Remove unnecessary TLB flush in M2P code.
  - Fixes duplicate callbacks in Xen granttable code.
  - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries
  - Fix for events being lost due to rescheduling on different VCPUs.
  - More documentation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSJgGgAAoJEFjIrFwIi8fJ4asH+gKp0aauPEdHtmn7rLfZUUJ5
 uuvWBiXiVVYMFz81NXlZ1WoAMuDuVA45Eu785uPRb9oUHDi0W8LO4Dqr+9lJTrXJ
 KiMvTXmOLSfSdjRlDI4jCoxBdg8tpbT3oJkXsFcHnrd5d4oTFGb0uuo5nFYPDicZ
 BGogDclzcqtlYl/2LUb+6vUXUQd77n0oW7RQ4yAaw3Qdj381om3Dmoeat8QU9Kdo
 Q4dhsHS6YAGR5R+G0zPfVOoKvSGoGV0NUdXr19QpYArGxKXcmiPjrgAJ/NGLsxvm
 8AbPjmQzOFJmUclHiiej6kvBsh2ZTYAesJMSAFLWD7EndXii7zljyJv0PIJ//uQ=
 =hNDW
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen updates from Konrad Rzeszutek Wilk:
 "A couple of features and a ton of bug-fixes.  There is also some
  maintership changes.  Jeremy is enjoying the full-time work at the
  startup and as much as he would love to help - he can't find the time.
  I have a bunch of other things that I promised to work on - paravirt
  diet, get SWIOTLB working everywhere, etc, but haven't been able to
  find the time.

  As such both David Vrabel and Boris Ostrovsky have graciously
  volunteered to help with the maintership role.  They will keep the lid
  on regressions, bug-fixes, etc.  I will be in the background to help -
  but eventually there will be less of me doing the Xen GIT pulls and
  more of them.  Stefano is still doing the ARM/ARM64 and will continue
  on doing so.

  Features:
   - Xen Trusted Platform Module (TPM) frontend driver - with the
     backend in MiniOS.
   - Scalability improvements in event channel.
   - Two extra Xen co-maintainers (David, Boris) and one going away (Jeremy)

  Bug-fixes:
   - Make the 1:1 mapping work during early bootup on selective regions.
   - Add scratch page to balloon driver to deal with unexpected code
     still holding on stale pages.
   - Allow NMIs on PV guests (64-bit only)
   - Remove unnecessary TLB flush in M2P code.
   - Fixes duplicate callbacks in Xen granttable code.
   - Fixes in PRIVCMD_MMAPBATCH ioctls to allow retries
   - Fix for events being lost due to rescheduling on different VCPUs.
   - More documentation"

* tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (23 commits)
  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
  drivers/xen-tpmfront: Fix compile issue with missing option.
  xen/balloon: don't set P2M entry for auto translated guest
  xen/evtchn: double free on error
  Xen: Fix retry calls into PRIVCMD_MMAPBATCH*.
  xen/pvhvm: Initialize xen panic handler for PVHVM guests
  xen/m2p: use GNTTABOP_unmap_and_replace to reinstate the original mapping
  xen: fix ARM build after 6efa20e4
  MAINTAINERS: Remove Jeremy from the Xen subsystem.
  xen/events: document behaviour when scanning the start word for events
  x86/xen: during early setup, only 1:1 map the ISA region
  x86/xen: disable premption when enabling local irqs
  swiotlb-xen: replace dma_length with sg_dma_len() macro
  swiotlb: replace dma_length with sg_dma_len() macro
  xen/balloon: set a mapping for ballooned out pages
  xen/evtchn: improve scalability by using per-user locks
  xen/p2m: avoid unneccesary TLB flush in m2p_remove_override()
  MAINTAINERS: Add in two extra co-maintainers of the Xen tree.
  MAINTAINERS: Update the Xen subsystem's with proper mailing list.
  xen: replace strict_strtoul() with kstrtoul()
  ...
2013-09-04 17:45:39 -07:00
Linus Torvalds
27703bb4a6 PTR_RET() is a weird name, and led to some confusing usage. We ended
up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.
 
 This has been sitting in linux-next for a whole cycle.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJo+1AAoJENkgDmzRrbjxIC4QALJK95o8AUXuwUkl+2fmFkUt
 hh2/PJ1vDYgk4Xt0J6hyoK7XMa0H1RkbBrROuDdsBnorMFpEsGcgdkUZte9ufoAS
 97Bg+7N0KPbTB/S8vOwtW1vbERTJIVPN2uf6h1Wqm9Xc2puCh3HbMMr1AWMGu0WQ
 NqY5+Zz8zecy1UOrMhEP6H1CjeQcL1w1DO6YM5ydeqlKNzAz+JMfDXriLPDwiE7+
 XFPDF/O3Vtd2ckA7L70Lio7hfHwxV5U4WwFVfiwls98XB4jcZqDKIoh1r8z4SRgR
 +0Rae2DN3BaOabGMr//5XdrzQVpwJTh5m2w8BAOHJvCJ9HR7Sq29UIN4u+TowZBy
 L2xYo4dvFxkympwu5zEd3c7vHYWKIaqmSq5PIjr4gF/uIo2OeOTrpPIK782ZEYb7
 e+qUgOEM05V9AmQZCrSZeP9u474Sj8ow3sCtWxfdRtwNfoEIcUXsNNJd/zDHlVtW
 cEtXqc2xXIpcuUJQWlSaGp8fmRQjVZPzrLKYLM2m39ZcOOJbf5rzQAYS7hHPosIa
 SK+YVux/+Zzi+Xo/vXq1OlM/SruCr5S7JOgCxLowoQ88vupgXME6uPyC8EO+QQ50
 GsrHes5ZNLbk0uVsfcexIyojkUnyvDmmnDpv+1zdC6RgZLJQn8OXp5yNhHhnhrFT
 BiHX6YFWtDDqRlVv8Q0F
 =LeaW
 -----END PGP SIGNATURE-----

Merge tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull PTR_RET() removal patches from Rusty Russell:
 "PTR_RET() is a weird name, and led to some confusing usage.  We ended
  up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages.

  This has been sitting in linux-next for a whole cycle"

[ There are still some PTR_RET users scattered about, with some of them
  possibly being new, but most of them existing in Rusty's tree too.  We
  have that

      #define PTR_RET(p) PTR_ERR_OR_ZERO(p)

  thing in <linux/err.h>, so they continue to work for now  - Linus ]

* tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO
  Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO
  drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO
  sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO
  dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO
  drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO
  mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR().
  staging/zcache: don't use PTR_RET().
  remoteproc: don't use PTR_RET().
  pinctrl: don't use PTR_RET().
  acpi: Replace weird use of PTR_RET.
  s390: Replace weird use of PTR_RET.
  PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
  PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04 17:31:11 -07:00
Linus Torvalds
aa7054f5a5 Bulk pin control changes for the v3.12 series:
- Refactorings for generic pin config handling in the core.
 
 - Factor out a set of device tree utilities for use in all
   drivers, to parse and allocate maps from the device tree.
 
 - Some fixes to the core such as more nitpicky locking.
 
 - Pushed down config array iteration into the drivers.
   This patch is necessary for drivers that want to iterate
   over configs and pile up a stack of alterations to the
   same register(s), or if the driver wants to take a local
   spinlock when committing the configuration.
 
 - A new driver for the Texas Instruments Palmas PMIC by
   Laxman Dewangan. This is used on the Tegra systems.
 
 - A major cleanup and modernization of the PFC (Super Hitachi
   and ARM SHmobile) pin controller and subdrivers.
 
 - Support for the A20 and A31 sunxi (AllWinner) SoCs.
 
 - A huge pile of fixes and cleanups: Axel Lin, Jingoo Han
   Dan Carpenter, Julia Lawall and Sachin Kamat did an
   excellent job here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJuhOAAoJEEEQszewGV1zTdYP/324hivdaSiGcdGRQiCyzgH8
 hhz+xIJ0x82VxbJs5HJ30fBK5UvQWF77NLaC4f8zSMfvdVyONB3uS/NxUWRN1Gdh
 9/gWP+kfJHhR8NOPS9FcEhtSVSKEuPSioVdOMutyaira5Kurv3DVJE3HgIQJtzNO
 kbMsCvU3wtqNzXw09rH57OcY+4L4iVWzn+VRCgWp+y/evjUaxXjgh82ZqKVc5MZz
 maF7oBAOryZtnDQarQYo4b0oNBIK4fWDyvh7mdHk5TC3OTtn7TCAylNDAtOYi0pf
 I7TTPIBfAFuBPgoq/0wih9aaBRP0KM0LqbQz+sBUX+1+g8XUxLUNspgjlTDFPXue
 o6uQN8Cv/77Pn4wVWMrKxfnZ4mjCMBgK7spPb0A30lCkVe13htVZtNJTo5CKLu66
 lR+L2nVjVGWdCh/qyHjHJzX1fdIf3eTURgbpZGgTvep1mfvMo1Zu0l7afXwxRe2F
 4WkRGZlF56gM3kPvqOGBmT9/UR19Q+EkDLlVK9vxodu0w/Rb9kVKwLNb6e+3rhJf
 nLuvRbMsAMSi+XSek7VD+e6Qfw/NHw7VXE0kJk74qjthZkt9gXBRzwGCiH+9cKKw
 MjaqKjtfqqnrCLHUJHQL4qZV+gFUKKQa0JtxJWvMZvvogKd7atErWZt6tJV49Ano
 77BOtvOeFt3d5gRAkvYi
 =OiJ8
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "Here is the bulk of pin control changes for the v3.12 series.  Most of
  the relevant information is in the tag.

  I merged in v3.11-rc7 last week to get rid of a largeish conflict
  within the sunxi (AllWinner) driver in linux-next and fix up the
  non-trivial merge the right way.  That driver had a rather large fix
  adding locking late in the release cycle.

  Overall the bulk changes this time is cleanups and refactorings and
  not much new features, which is nice.

   - Refactorings for generic pin config handling in the core.

   - Factor out a set of device tree utilities for use in all drivers,
     to parse and allocate maps from the device tree.

   - Some fixes to the core such as more nitpicky locking.

   - Pushed down config array iteration into the drivers.

     This patch is necessary for drivers that want to iterate over
     configs and pile up a stack of alterations to the same register(s),
     or if the driver wants to take a local spinlock when committing the
     configuration.

   - A new driver for the Texas Instruments Palmas PMIC by Laxman
     Dewangan.  This is used on the Tegra systems.

   - A major cleanup and modernization of the PFC (Super Hitachi and ARM
     SHmobile) pin controller and subdrivers.

   - Support for the A20 and A31 sunxi (AllWinner) SoCs.

   - A huge pile of fixes and cleanups: Axel Lin, Jingoo Han Dan
     Carpenter, Julia Lawall and Sachin Kamat did an excellent job here"

* tag 'pinctrl-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (124 commits)
  pinctrl: sunxi: Fix off-by-one for valid offset range checking
  pinctrl: sunxi: drop lock on error path
  pinctrl: pinconf-generic: Remove ti prefix in dev_err messages
  pinctrl: rockchip: Implement .request() and .free() callbacks
  pinctrl: at91: fix get_pullup/down function return
  pinctrl: sh-pfc: remove unnecessary platform_set_drvdata()
  pinctrl: Add s5pv210 support to pinctrl-exynos
  pinctrl: utils: include export.h to avoid warnings
  pinctrl: s3c24xx: off by one in s3c24xx_eint_init()
  pinctrl: mvebu: testing the wrong variable
  pinctrl: abx500: fix bitwise AND test
  pinctrl: mvebu: Convert to use devm_ioremap_resource
  pinctrl: Pass all configs to driver on pin_config_set()
  pinctrl: tz1090-pdc: Convert to devm_ioremap_resource
  pinctrl: tz1090: Convert to devm_ioremap_resource
  pinctrl: tegra: Convert to devm_ioremap_resource
  pinctrl: rockchip: Simplify pin_to_bank equation
  pinctrl: spear: Convert to devm_ioremap_resource
  pinctrl: rockchip: Remove of_match_ptr macro for DT only driver
  pinctrl: palmas: PINCTRL_PALMAS needs to select PINMUX
  ...
2013-09-04 16:24:33 -07:00
David Herrmann
3b28802e37 drm/tda998x: BUG() on invalid audio format
Suppress warning of unused-variables by adding a BUG()+return for invalid
audio-formats.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-09-05 08:52:19 +10:00
Stephen Rothwell
ab62e76861 drm/radeon: protect ACPI calls with CONFIG_ACPI
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-09-05 08:19:31 +10:00
Sergei Shtylyov
d2779e9946 sh_eth: fix napi_{en|dis}able() calls racing against interrupts
While implementing NAPI for the driver, I overlooked the race conditions where
interrupt  handler might have called napi_schedule_prep() before napi_enable()
was called or after napi_disable() was called. If RX interrupt happens, this
would cause the endless interrupts and messages like:

sh-eth eth0: ignoring interrupt, status 0x00040000, mask 0x01ff009f.

The interrupt wouldn't even be masked by the kernel eventually since the handler
would return IRQ_HANDLED all the time.

As a fix, move napi_enable() call before request_irq() call and napi_disable()
call after free_irq() call.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:55:34 -04:00
Pravin B Shelar
430eda6d6d vxlan: Optimize vxlan rcv
vxlan-udp-recv function lookup vxlan_sock struct on every packet
recv by using udp-port number. we can use sk->sk_user_data to
store vxlan_sock and avoid lookup.
I have open coded rcu-api to store and read vxlan_sock from
sk_user_data to avoid sparse warning as sk_user_data is not
__rcu pointer.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:41:55 -04:00
Andy Shevchenko
f8de31040d atm: he: print MAC via %pM
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:41:55 -04:00
Andy Shevchenko
8390f81482 atm: nicstar: re-use native mac_pton() helper
There is a nice helper to parse MAC. Let's use it and remove custom
implementation.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:41:55 -04:00
Sonic Zhang
0cf915809c driver:stmmac: Adjust time stamp increase for 0.465 ns accurate only when Time stamp binary rollover is set.
The synopsys spec says When TSCRLSSR is cleard, the rollover value of
sub-second register is 0x7FFFFFFF(0.465 ns per clock).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:37:02 -04:00
Duan Fugang-B38611
36e24e2ee2 net: fec: fix the error to get the previous BD entry
Bug: error to get the previous BD entry. When the current BD
is the first BD, the previous BD entry must be the last BD,
not "bdp - 1" in current logic.

V4:
  * Optimize fec_enet_get_nextdesc() for code clean.
    Replace "ex_new_bd - ring_size" with "ex_base".
    Replace "new_bd - ring_size" with "base".

V3:
  * Restore the API name because David suggest to use fec_enet_
    prefix for all function in fec driver.
    So, change next_bd() -> fec_enet_get_nextdesc()
        change pre_bd()  -> fec_enet_get_prevdesc()
  * Reduce the two APIs parameters for easy to call.

V2:
  * Add tx_ring_size and rx_ring_size to struct fec_enet_private.
  * Replace api fec_enet_get_nextdesc() with next_bd().
    Replace api fec_enet_get_prevdesc() with pre_bd().

  * Move all ring size check logic to next_bd() and pre_bd(), which
    simplifies the code redundancy.

V1:
  * Add BD ring size check to get the previous BD entry in correctly.

Reviewed-by: Li Frank <B20596@freescale.com>
Signed-off-by: Fugang Duan  <B38611@freescale.com>
Acked-by: Frank Li <frank.li@freescale.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:14:54 -04:00
Sergei Shtylyov
a8e9fd0f74 sh_eth: NAPI requires netif_receive_skb()
Driver supporting NAPI should use NAPI-specific function for receiving packets,
so netif_rx() should be changed to netif_receive_skb().

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 14:14:53 -04:00
Linus Torvalds
b20c99eb66 Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS changes from Ingo Molnar:
 "[ The reason for drivers/ updates is that Boris asked for the
    drivers/edac/ changes to go via x86/ras in this cycle ]

  Main changes:

   - AMD CPUs:
      . Add ECC event decoding support for new F15h models
      . Various erratum fixes
      . Fix single-channel on dual-channel-controllers bug.

   - Intel CPUs:
      . UC uncorrectable memory error parsing fix
      . Add support for CMC (Corrected Machine Check) 'FF' (Firmware
        First) flag in the APEI HEST

   - Various cleanups and fixes"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  amd64_edac: Fix incorrect wraparounds
  amd64_edac: Correct erratum 505 range
  cpc925_edac: Use proper array termination
  x86/mce, acpi/apei: Only disable banks listed in HEST if mce is configured
  amd64_edac: Get rid of boot_cpu_data accesses
  amd64_edac: Add ECC decoding support for newer F15h models
  x86, amd_nb: Clarify F15h, model 30h GART and L3 support
  pci_ids: Add PCI device ID functions 3 and 4 for newer F15h models.
  x38_edac: Make a local function static
  i3200_edac: Make a local function static
  x86/mce: Pay no attention to 'F' bit in MCACOD when parsing 'UC' errors
  APEI/ERST: Fix error message formatting
  amd64_edac: Fix single-channel setups
  EDAC: Replace strict_strtol() with kstrtol()
  mce: acpi/apei: Soft-offline a page on firmware GHES notification
  mce: acpi/apei: Add a boot option to disable ff mode for corrected errors
  mce: acpi/apei: Honour Firmware First for MCA banks listed in APEI HEST CMC
2013-09-04 11:07:04 -07:00
Julia Lawall
0a171933a4 drivers:net: delete premature free_irq
Free_irq is not needed if there has been no request_irq.  Free_irq is
removed from both the probe and remove functions.  The correct request_irq
and free_irq are found in the open and close functions.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

*e = platform_get_irq(...);
... when != request_irq(e,...)
*free_irq(e,...)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 13:18:19 -04:00
Dan Carpenter
42a5a5c128 sfc: check for allocation failure
It upsets static analyzers when we don't check for allocation failure.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 13:07:47 -04:00
Linus Torvalds
228abe73ad Merge branch 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fb changes from Ingo Molnar:
 "This tree includes preparatory patches for SimpleDRM driver support,
  by David Herrmann.  They clean up x86 framebuffer support by creating
  simplefb devices wherever possible.  More background can be found at

     http://lwn.net/Articles/558104/"

* 'x86-fb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev: fbcon: select VT_HW_CONSOLE_BINDING
  fbdev: efifb: bind to efi-framebuffer
  fbdev: vesafb: bind to platform-framebuffer device
  fbdev: simplefb: add common x86 RGB formats
  x86: sysfb: move EFI quirks from efifb to sysfb
  x86: provide platform-devices for boot-framebuffers
  fbdev: simplefb: mark as fw and allocate apertures
  fbdev: simplefb: add init through platform_data
2013-09-04 09:12:17 -07:00
Linus Torvalds
ac3c1c4f1c Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Ingo Molnar:
 "Various clocksource driver updates: extend the core with memory mapped
  hardware (mmio) support and add new (ARM) Moxart SoC and sun4i
  hardware support"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: arch_timer: Add support for memory mapped timers
  clocksource: arch_timer: Push the read/write wrappers deeper
  Documentation: Add memory mapped ARM architected timer binding
  clocksource: arch_timer: Pass clock event to set_mode callback
  clocksource: arch_timer: Make register accessors less error-prone
  ARM: clocksource: moxart: documentation: Update device tree bindings document
  ARM: clocksource: moxart: Add bitops.h include
  ARM: clocksource: moxart: documentation: Fix device tree bindings document
  ARM: clocksource: Add support for MOXA ART SoCs
  clocksource: cadence_ttc: Reuse clocksource as sched_clock
  clocksource: cadence_ttc: Remove unused header
  clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
  clocksource: sun4i: Cleanup parent clock setup
  clocksource: sun4i: Remove TIMER_SCAL variable
  clocksource: sun4i: Factor out some timer code
  clocksource: sun4i: Fix the next event code
  clocksource: sun4i: Don't forget to enable the clock we use
  clocksource: sun4i: Add clocksource and sched clock drivers
  clocksource: sun4i: rename AUTORELOAD define to RELOAD
  clocksource: sun4i: Wrap macros arguments in parenthesis
  ...
2013-09-04 08:38:26 -07:00
Akeem G Abodunrin
66f40b8a29 igb: Update version number
This patch updates igb driver version to 5.0.5

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:49:27 -07:00
Akeem G Abodunrin
41fcfbea0c igb: Implementation to report advertised/supported link on i354 devices
This patch changes the way we report supported/advertised link for i354
devices, especially for 2.5 GB. Instead of reporting 2.5 GB for all i354
devices erroneously, check first, if it is 2.5 GB capable.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:41:05 -07:00
Akeem G Abodunrin
f6878e39c7 igb: Get speed and duplex for 1G non_copper devices
This patch changes how we get speed/duplex for non_copper devices; it
now uses pcs register to get current speed and duplex instead of using
generic status register that we use to detect speed/duplex for copper
devices.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:28:31 -07:00
Linus Walleij
65d876564e gpio: return -ENOTSUPP if debounce cannot be set
It appears some drivers are using gpio_set_debounce()
opportunistically, i.e. without knowing whether it works or
not. (Example: input/keyboard/gpio_keys.c) to account for
this use case, return -ENOTSUPP and do not print any
warnings in this case.

Took a round over the other gpio_set_debounce() consumers
to make sure that none of them are relying on the returned
error code to be something specific.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-04 14:22:47 +02:00
Akeem G Abodunrin
f1b4d6214b igb: Support to get 2_5G link status for appropriate media type
Since i354 2.5Gb devices are not Copper media type but SerDes, so this
patch changes the way we detect speed/duplex link info for this device.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:19:30 -07:00
Akeem G Abodunrin
db476e8511 igb: No PHPM support in i354 devices
PHY Power Management does not exist for i354 device. So, there is no
need to read and write this register or clear go link Disconnect bit,
which could cause a lot of issues.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:10:55 -07:00
Akeem G Abodunrin
dfc707558b igb: M88E1543 PHY downshift implementation
This patch implements downshift mechanism for M88E1543 PHY, so that
downshift is disabled first during link setup process, and later enabled
if we are master and downshift link is negotiated. Also cleaned up
return code implementation.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 05:04:31 -07:00
Akeem G Abodunrin
99af4729c4 igb: New PHY_ID for i354 device
This patch changes PHY_ID for i354 device, now using M88E1543
instead of M88E1545.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 04:57:13 -07:00
Akeem G Abodunrin
aa9b8cc444 igb: Implementation of 1-sec delay for i210 devices
This patch adds 1 sec delay mechanism to i210 device family, in order
to avoid erroneous link issue with the link partner.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 03:53:53 -07:00
Nguyen Viet Dung
b720423a26 i2c: rcar: add rcar-H2 support
This patch modify I2C driver of rcar-H1 to usable on both rcar-H1 and rcar-H2.

Signed-off-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-04 11:49:16 +01:00
Todd Fujinaka
53ea6c7e2d igb: Don't look for a PBA in the iNVM when flashless
When a part is flashless, do not look for a PBA in the iNVM.

Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04 03:40:05 -07:00
Joe Perches
9e03aa2f83 treewide: Convert retrun typos to return
Tyops should be fixed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:26:36 +02:00
Andy Shevchenko
7b0692f1c6 HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup
The patch substitutes kmemdup for kmalloc followed by memcpy.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:19:13 +02:00
Andy Shevchenko
905cc1991a HID: hid-sensor-hub: move to devm_kzalloc
devm_kzalloc() will manage resources freeing and allows to make error path
smaller and nicer.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:19:13 +02:00
Andy Shevchenko
5902fde19a HID: hid-sensor-hub: fix indentation accross the code
Patch just rearranges lines to be more compact and/or readable. Additionally it
converts double space to one in several places.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:19:12 +02:00
Jiri Kosina
47ab1a2de4 Merge branch 'for-3.11/CVE-2013-2888' into for-3.12/upstream
This one didn't make it for 3.11 due to being applied too close
to release, queue it for 3.12 merge window.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:06:58 +02:00
Kees Cook
be67b68d52 HID: check for NULL field when setting values
Defensively check that the field to be worked on is not NULL.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:05:31 +02:00
Kees Cook
1e87a2456b HID: picolcd_core: validate output report details
A HID device could send a malicious output report that would cause the
picolcd HID driver to trigger a NULL dereference during attr file writing.

[jkosina@suse.cz: changed

	report->maxfield < 1

to

	report->maxfield != 1

as suggested by Bruno].

CVE-2013-2899

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:03:27 +02:00
Kees Cook
9e89102573 HID: sensor-hub: validate feature report details
A HID device could send a malicious feature report that would cause the
sensor-hub HID driver to read past the end of heap allocation, leaking
kernel memory contents to the caller.

CVE-2013-2898

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:01:58 +02:00
Kees Cook
875b4e3763 HID: ntrig: validate feature report details
A HID device could send a malicious feature report that would cause the
ntrig HID driver to trigger a NULL dereference during initialization:

[57383.031190] usb 3-1: New USB device found, idVendor=1b96, idProduct=0001
...
[57383.315193] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
[57383.315308] IP: [<ffffffffa08102de>] ntrig_probe+0x25e/0x420 [hid_ntrig]

CVE-2013-2896

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 12:00:23 +02:00
Kees Cook
412f30105e HID: pantherlord: validate output report details
A HID device could send a malicious output report that would cause the
pantherlord HID driver to write beyond the output report allocation
during initialization, causing a heap overflow:

[  310.939483] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0003
...
[  315.980774] BUG kmalloc-192 (Tainted: G        W   ): Redzone overwritten

CVE-2013-2892

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 11:58:32 +02:00
Andy Shevchenko
95f712662d HID: hid-wiimote: print small buffers via %*phC
Instead of passing each byte through stack let's use %*phC specifier to dump
buffer as a hex string.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 11:42:10 +02:00
Henrik Rydberg
8c89cc17b9 HID: Correct the USB IDs for the new Macbook Air 6
A recent patch (9d9a04ee) added support for the new machine, but got
the sequence of USB ids wrong. Reports from both Ian and Linus T show
that the 0x0291 id is for ISO, not ANSI, which should have the missing
number 0x0290. This patchs moves the three numbers accordingly, fixing
the problem.

Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com>
Tested-by: Linus G Thiel <linus@hanssonlarsson.se>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 10:50:41 +02:00
Jiri Kosina
efd15f5f4f Merge branch 'master' into for-3.12/upstream
Sync with Linus' tree to be able to apply fixup patch on top
of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air")

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 10:49:57 +02:00
Nicolas Adenis-Lamarre
8e22ecb603 HID: wiimote: add support for Guitar-Hero guitars
Apart from drums, Guitar-Hero also ships with guitars. Use the recently
introduced input ABS/BTN-bits to report this to user-space.

Devices are reported as "Nintendo Wii Remote Guitar". If I ever get my
hands on "RockBand" guitars, I will try to report them via the same
interface so user-space does not have to bother which device it deals
with.

Signed-off-by: Nicolas.Adenis-Lamarre <nicolas.adenis.lamarre@gmail.com>
(add commit-msg and adjust to new BTN_* IDs)
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 10:44:17 +02:00
David Herrmann
73f8645db1 HID: wiimote: add support for Guitar-Hero drums
Guitar-Hero comes with a drums extension. Use the newly introduced input
drums-bits to report this back to user-space. This is a usual extension
like any other device. Nothing special to take care of.

We report this to user-space as "Nintendo Wii Remote Drums". There are
other drums (like "RockBand" drums) which we currently do not support and
maybe will at some point. However, it is quite likely that we can report
these via the same interface. This allows user-space to work with them
without knowing the exact branding.
I couldn't find anyone who owns a "RockBand" device, though.

Initial-work-by: Nicolas Adenis-Lamarre <nicolas.adenis.lamarre@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04 10:44:17 +02:00
Dan Carpenter
3cc4a6784d qlcnic: remove a stray semicolon
Just remove a small semicolon.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Sucheta Chakraborty
0996b7dfc3 qlcnic: Fix sparse warning.
This patch fixes warning "warning: symbol 'qlcnic_set_dcb_ops' was
not declared. Should it be static?"

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Dan Carpenter
cab6ce9ebe caif: add a sanity check to the tty name
"tty->name" and "name" are a 64 character buffers.  My static checker
complains because we add the "cf" on the front so it look like we are
copying a 66 character string into a 64 character buffer.

Also if the name is larger than IFNAMSIZ (16) it triggers a BUG_ON()
inside the call to alloc_netdev().

This is all under CAP_SYS_ADMIN so it's not a security fix, it just adds
a little robustness.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Anton Blanchard
0b536be7b9 ibmveth: Fix little endian issues
The hypervisor is big endian, so little endian kernel builds need
to byteswap.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Jingoo Han
c67c71b4e8 net: netx-eth: remove unnecessary casting
Casting from 'void *' is unnecessary, because casting from 'void *'
to any pointer type is automatic.

Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Michael Chan
069281d184 cnic: Update version to 2.5.18.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Michael Chan
a5b3c4ae27 cnic: Eliminate local copy of pfid.
Use bp->pfid from bnx2x instead to avoid duplication.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:26 -04:00