Commit Graph

7820 Commits

Author SHA1 Message Date
Kevin Hilman
48e21ded04 ARM64: dts: meson-gx: fix ATF reserved memory region
Vendor firmware/uboot has different reserved regions depending on
firmware version, but current codebase reserves the same regions on
GXL and GXBB, so move the additional reserved memory region to common
.dtsi.

Found when putting a recent vendor u-boot on meson-gxbb-p200.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-27 16:48:25 -07:00
Neil Armstrong
d511b3e408 ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the
devices on the P212 Reference Design based boards.

Fixes: b9f07cb4f4 ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-27 16:48:25 -07:00
Kevin Hilman
e490520c90 ARM64: dts: meson: fix register ranges for SD/eMMC
Based on updated information from Amlogic, correct the register range
for the SD/eMMC blocks to the right size.

Reported-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-27 16:48:25 -07:00
Jerome Brunet
d5b4885b1d ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
There is a problem with the sd-uhs mode when doing a soft reboot.
Switching back from 1.8v to 3.3v messes with the card, which no longer
respond (timeout errors). According to the specification, we should
perform a card reset (power cycling the card) but this is something we
cannot control on this design.

Then the only solution to restore the communication with the card is an
"unplug-plug" which is not acceptable

Until we find a solution, if any, disable the sd-uhs modes on this design.
For the people using uhs at the moment, there will a performance drop as
a result.

Fixes: 3cde63ebc8 ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-27 16:48:25 -07:00
Mauro Carvalho Chehab
5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Linus Torvalds
b5d903c2d6 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - MM remainders

 - various misc things

 - kcov updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits)
  lib/test_printf.c: call wait_for_random_bytes() before plain %p tests
  hexagon: drop the unused variable zero_page_mask
  hexagon: fix printk format warning in setup.c
  mm: fix oom_kill event handling
  treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAX
  mm: use octal not symbolic permissions
  ipc: use new return type vm_fault_t
  sysvipc/sem: mitigate semnum index against spectre v1
  fault-injection: reorder config entries
  arm: port KCOV to arm
  sched/core / kcov: avoid kcov_area during task switch
  kcov: prefault the kcov_area
  kcov: ensure irq code sees a valid area
  kernel/relay.c: change return type to vm_fault_t
  exofs: avoid VLA in structures
  coredump: fix spam with zero VMA process
  fat: use fat_fs_error() instead of BUG_ON() in __fat_get_block()
  proc: skip branch in /proc/*/* lookup
  mremap: remove LATENCY_LIMIT from mremap to reduce the number of TLB shootdowns
  mm/memblock: add missing include <linux/bootmem.h>
  ...
2018-06-15 08:51:42 +09:00
Stefan Agner
d7dc899abe treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAX
With PHYS_ADDR_MAX there is now a type safe variant for all bits set.
Make use of it.

Patch created using a semantic patch as follows:

// <smpl>
@@
typedef phys_addr_t;
@@
-(phys_addr_t)ULLONG_MAX
+PHYS_ADDR_MAX
// </smpl>

Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15 07:55:25 +09:00
Masahiro Yamada
d148eac0e7 Kbuild: rename HAVE_CC_STACKPROTECTOR config variable
HAVE_CC_STACKPROTECTOR should be selected by architectures with stack
canary implementation.  It is not about the compiler support.

For the consistency with commit 050e9baa9d ("Kbuild: rename
CC_STACKPROTECTOR[_STRONG] config variables"), remove 'CC_' from the
config symbol.

I moved the 'select' lines to keep the alphabetical sorting.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15 07:15:28 +09:00
Linus Torvalds
050e9baa9d Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.

Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-14 12:21:18 +09:00
Linus Torvalds
be779f03d5 Kbuild updates for v4.18 (2nd)
- fix some bugs introduced by the recent Kconfig syntax extension
 
  - add some symbols about compiler information in Kconfig, such as
    CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
 
  - test compiler capability for the stack protector in Kconfig, and
    clean-up Makefile
 
  - test compiler capability for GCC-plugins in Kconfig, and clean-up
    Makefile
 
  - allow to enable GCC-plugins for COMPILE_TEST
 
  - test compiler capability for KCOV in Kconfig and correct dependency
 
  - remove auto-detect mode of the GCOV format, which is now more nicely
    handled in Kconfig
 
  - test compiler capability for mprofile-kernel on PowerPC, and
    clean-up Makefile
 
  - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbISvEAAoJED2LAQed4NsGEsoQAKBHMqUM9yQo0LdVMnDMCLQI
 Xsjyqzr0ySp6YiuF+cobwDs49sggt7/8EX+OnrP/sLlAhY0QrNGI1ulhwpFx1Ewa
 xFxz5kF/1jDwC+AjngXcK5Dr9nGSSMfT3wQhLGKjMkKSypbz2QyTrfMOfHGYSzU1
 gD8RMWYXxKoJFmIaqmpLz7PDfWKPzhSOZo7BflPjAGXdlpfSV9cQvu+TkJ12qvSp
 KZ2uHUgLz95NnltSuGtN71X8so7w4eTYAvkJ5bOeOpYsZSVYRq4Exvwe0Y0dbwie
 WDpcRC5KrQOlIFxRUUSGn5cDsaW9yYJJAwMG6Dr8qJ66QlgY5GqOKXxXX+ARa7WU
 7GkeAZ11n5dArjjdSjfClh8CwDiZNpJmAUbahm+feQfUfq9nbs+0JX6bOG5ZE+nt
 3iE0ZoSGDjxD5Pjy4u+NtQM0JCpieuz3JNxqVbAVm0Ua5q8niwSEneixyrNmjkBF
 1tV+qsMYus7AFwdGuDRXzBhVY7hd931H34czA3FUZZqwcClFVoJiygI++s62mVXx
 w9kYi8Ades/W6dt7c7XGjmqYTDgnTolLaYY5vggpEeLOzc1QPW6iKt9tpREi6Zzm
 n+y586YsIo0vjTMfRcfmGZUPG3CJeqL2UDslYmG8PgMQ6/eaAHBDXECLrAkGGPlG
 aIPZcMam5BQxhmSJc19c
 =VABv
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix some bugs introduced by the recent Kconfig syntax extension

 - add some symbols about compiler information in Kconfig, such as
   CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.

 - test compiler capability for the stack protector in Kconfig, and
   clean-up Makefile

 - test compiler capability for GCC-plugins in Kconfig, and clean-up
   Makefile

 - allow to enable GCC-plugins for COMPILE_TEST

 - test compiler capability for KCOV in Kconfig and correct dependency

 - remove auto-detect mode of the GCOV format, which is now more nicely
   handled in Kconfig

 - test compiler capability for mprofile-kernel on PowerPC, and clean-up
   Makefile

 - misc cleanups

* tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
  kconfig: fix localmodconfig
  sh: remove no-op macro VMLINUX_SYMBOL()
  powerpc/kbuild: move -mprofile-kernel check to Kconfig
  Documentation: kconfig: add recommended way to describe compiler support
  gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
  gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
  gcc-plugins: test plugin support in Kconfig and clean up Makefile
  gcc-plugins: move GCC version check for PowerPC to Kconfig
  kcov: test compiler capability in Kconfig and correct dependency
  gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
  arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  kconfig: add CC_IS_CLANG and CLANG_VERSION
  kconfig: add CC_IS_GCC and GCC_VERSION
  stack-protector: test compiler capability in Kconfig and drop AUTO mode
  kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
2018-06-13 08:40:34 -07:00
Linus Torvalds
b08fc5277a - Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
 - Explicitly reported overflow fixes (Silvio, Kees)
 - Add missing kvcalloc() function (Kees)
 - Treewide conversions of allocators to use either 2-factor argument
   variant when available, or array_size() and array3_size() as needed (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsgVtMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJhsJEACLYe2EbwLFJz7emOT1KUGK5R1b
 oVxJog0893WyMqgk9XBlA2lvTBRBYzR3tzsadfYo87L3VOBzazUv0YZaweJb65sF
 bAvxW3nY06brhKKwTRed1PrMa1iG9R63WISnNAuZAq7+79mN6YgW4G6YSAEF9lW7
 oPJoPw93YxcI8JcG+dA8BC9w7pJFKooZH4gvLUSUNl5XKr8Ru5YnWcV8F+8M4vZI
 EJtXFmdlmxAledUPxTSCIojO8m/tNOjYTreBJt9K1DXKY6UcgAdhk75TRLEsp38P
 fPvMigYQpBDnYz2pi9ourTgvZLkffK1OBZ46PPt8BgUZVf70D6CBg10vK47KO6N2
 zreloxkMTrz5XohyjfNjYFRkyyuwV2sSVrRJqF4dpyJ4NJQRjvyywxIP4Myifwlb
 ONipCM1EjvQjaEUbdcqKgvlooMdhcyxfshqJWjHzXB6BL22uPzq5jHXXugz8/ol8
 tOSM2FuJ2sBLQso+szhisxtMd11PihzIZK9BfxEG3du+/hlI+2XgN7hnmlXuA2k3
 BUW6BSDhab41HNd6pp50bDJnL0uKPWyFC6hqSNZw+GOIb46jfFcQqnCB3VZGCwj3
 LH53Be1XlUrttc/NrtkvVhm4bdxtfsp4F7nsPFNDuHvYNkalAVoC3An0BzOibtkh
 AtfvEeaPHaOyD8/h2Q==
 =zUUp
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull more overflow updates from Kees Cook:
 "The rest of the overflow changes for v4.18-rc1.

  This includes the explicit overflow fixes from Silvio, further
  struct_size() conversions from Matthew, and a bug fix from Dan.

  But the bulk of it is the treewide conversions to use either the
  2-factor argument allocators (e.g. kmalloc(a * b, ...) into
  kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
  b) into vmalloc(array_size(a, b)).

  Coccinelle was fighting me on several fronts, so I've done a bunch of
  manual whitespace updates in the patches as well.

  Summary:

   - Error path bug fix for overflow tests (Dan)

   - Additional struct_size() conversions (Matthew, Kees)

   - Explicitly reported overflow fixes (Silvio, Kees)

   - Add missing kvcalloc() function (Kees)

   - Treewide conversions of allocators to use either 2-factor argument
     variant when available, or array_size() and array3_size() as needed
     (Kees)"

* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
  treewide: Use array_size in f2fs_kvzalloc()
  treewide: Use array_size() in f2fs_kzalloc()
  treewide: Use array_size() in f2fs_kmalloc()
  treewide: Use array_size() in sock_kmalloc()
  treewide: Use array_size() in kvzalloc_node()
  treewide: Use array_size() in vzalloc_node()
  treewide: Use array_size() in vzalloc()
  treewide: Use array_size() in vmalloc()
  treewide: devm_kzalloc() -> devm_kcalloc()
  treewide: devm_kmalloc() -> devm_kmalloc_array()
  treewide: kvzalloc() -> kvcalloc()
  treewide: kvmalloc() -> kvmalloc_array()
  treewide: kzalloc_node() -> kcalloc_node()
  treewide: kzalloc() -> kcalloc()
  treewide: kmalloc() -> kmalloc_array()
  mm: Introduce kvcalloc()
  video: uvesafb: Fix integer overflow in allocation
  UBIFS: Fix potential integer overflow in allocation
  leds: Use struct_size() in allocation
  Convert intel uncore to struct_size
  ...
2018-06-12 18:28:00 -07:00
Kees Cook
6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds
b357bf6023 Small update for KVM.
* ARM: lazy context-switching of FPSIMD registers on arm64, "split"
 regions for vGIC redistributor
 
 * s390: cleanups for nested, clock handling, crypto, storage keys and
 control register bits
 
 * x86: many bugfixes, implement more Hyper-V super powers,
 implement lapic_timer_advance_ns even when the LAPIC timer
 is emulated using the processor's VMX preemption timer.  Two
 security-related bugfixes at the top of the branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbH8Z/AAoJEL/70l94x66DF+UIAJeOuTp6LGasT/9uAb2OovaN
 +5kGmOPGFwkTcmg8BQHI2fXT4vhxMXWPFcQnyig9eXJVxhuwluXDOH4P9IMay0yw
 VDCBsWRdMvZDQad2hn6Z5zR4Jx01XrSaG/KqvXbbDKDCy96mWG7SYAY2m3ZwmeQi
 3Pa3O3BTijr7hBYnMhdXGkSn4ZyU8uPaAgIJ8795YKeOJ2JmioGYk6fj6y2WCxA3
 ztJymBjTmIoZ/F8bjuVouIyP64xH4q9roAyw4rpu7vnbWGqx1fjPYJoB8yddluWF
 JqCPsPzhKDO7mjZJy+lfaxIlzz2BN7tKBNCm88s5GefGXgZwk3ByAq/0GQ2M3rk=
 =H5zI
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small update for KVM:

  ARM:
   - lazy context-switching of FPSIMD registers on arm64
   - "split" regions for vGIC redistributor

  s390:
   - cleanups for nested
   - clock handling
   - crypto
   - storage keys
   - control register bits

  x86:
   - many bugfixes
   - implement more Hyper-V super powers
   - implement lapic_timer_advance_ns even when the LAPIC timer is
     emulated using the processor's VMX preemption timer.
   - two security-related bugfixes at the top of the branch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits)
  kvm: fix typo in flag name
  kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
  KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
  KVM: x86: introduce linear_{read,write}_system
  kvm: nVMX: Enforce cpl=0 for VMX instructions
  kvm: nVMX: Add support for "VMWRITE to any supported field"
  kvm: nVMX: Restrict VMX capability MSR changes
  KVM: VMX: Optimize tscdeadline timer latency
  KVM: docs: nVMX: Remove known limitations as they do not exist now
  KVM: docs: mmu: KVM support exposing SLAT to guests
  kvm: no need to check return value of debugfs_create functions
  kvm: Make VM ioctl do valloc for some archs
  kvm: Change return type to vm_fault_t
  KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008
  kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation
  KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability
  KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation
  KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation
  KVM: introduce kvm_make_vcpus_request_mask() API
  KVM: x86: hyperv: do rep check for each hypercall separately
  ...
2018-06-12 11:34:04 -07:00
Linus Torvalds
8efcf34a26 ARM: SoC: late updates
This is a branch with a few merge requests that either came in late, or
 took a while longer for us to review and merge than usual and thus cut
 it a bit close to the merge window. We stage them in a separate branch
 and if things look good, we still send them up -- and that's the case
 here.
 
 This is mostly DT additions for Renesas platforms, adding IP block
 descriptions for existing and new SoCs.
 
 There are also some driver updates for Qualcomm platforms for SMEM/QMI
 and GENI, which is their generalized serial protocol interface.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCVIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3KOcP/3O2+igstXt5rhemITdyi8rHkrIHPgetf25e
 ISBQzYrQOHV21SqT4le/Gk2CCQ6iX5Nv2DYoIrCzFWi/4DoDxXvryczQLla02Nru
 i8fcuxae7aFGW7/97G1+cATGPwuBLPiKXs6Wj01sKHeLBja5Det7eoXuHag7Y/Lo
 4ls9wNZybMdlCcGm6+ULdj+XUdRyYUhOQQYvnPm2Q8hEkM+AiwLOBJTFwef9P5ad
 mX37kPDfwCxYwQXgZB1RkK/oJu0G2mTZXmGH5o+s+9yAyAupCQhmHGOrt3mlOf7j
 tLRlSgarJlO/QGIpJmDuCcxt3msD3OMd2dPbdgwojdpvycOU8EVWYLmCRpyIWQXv
 DCv9A9Gp4KlJnwxheVegBtilRA1aKsGuarWq6yeyOFt8N23Bgg/IjYKI9JF5+hPD
 M4q1oVAbUlfWb79rEc+TB0d7euREBkNn4TzzKMSOyP3eGUrXR0WUlq2A2VLxgIJo
 cx/ufY7CwvRgV+VxfhRbca+FmwDnu7uqzwLe73Ys2hnsuv8hXEtc+vSybqKqxVeU
 nHpWAqwaWhijlJiGq722vPo8avrLwjsxRwimogvijtesz9ZlTqrGtjkg61+eN2h8
 eeuyRAsMUfVRiKuL3W+q4s0rzIauormnKsvRScKVyNFuiJfrfYb1odLoDGaOV/9G
 dQ7hA7TW
 =RUL0
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late updates from Olof Johansson:
 "This is a branch with a few merge requests that either came in late,
  or took a while longer for us to review and merge than usual and thus
  cut it a bit close to the merge window. We stage them in a separate
  branch and if things look good, we still send them up -- and that's
  the case here.

  This is mostly DT additions for Renesas platforms, adding IP block
  descriptions for existing and new SoCs.

  There are also some driver updates for Qualcomm platforms for SMEM/QMI
  and GENI, which is their generalized serial protocol interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
  soc: qcom: smem: introduce qcom_smem_virt_to_phys()
  soc: qcom: qmi: fix a buffer sizing bug
  MAINTAINERS: Update pattern for qcom_scm
  soc: Unconditionally include qcom Makefile
  soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
  soc: qcom: smem: fix qcom_smem_set_global_partition()
  soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
  soc: qcom: smem: byte swap values properly
  soc: qcom: smem: return proper type for cached entry functions
  soc: qcom: smem: fix first cache entry calculation
  soc: qcom: cmd-db: Make endian-agnostic
  drivers: qcom: add command DB driver
  arm64: dts: renesas: salvator-common: Add ADV7482 support
  ARM: dts: r8a7740: Add CEU1
  ARM: dts: r8a7740: Add CEU0
  arm64: dts: renesas: salvator-common: enable VIN
  arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7795-es1: add CSI-2 node
  ...
2018-06-11 18:19:45 -07:00
Linus Torvalds
721afaa2ae ARM: Device-tree updates
As always, a large number of DT updates. Too many to enumerate them all,
 but at a glance:
 
 New SoCs introduced in this release:
 
  - Amlogic:
    + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set
      top boxes and other products.
 
  - Mediatek:
    + MT7623A, which is a flavor of the MT7623 family with other on-chip
      ethernet options.
 
  - Qualcomm:
    + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
      (Cortex-A75/A55 derivative) SoC that's one of the current high-end
      mobile SoCs.
 
      It's great to see mainline support for it. So far, you
      can't do much with it, since a lot of peripherals are not yet in the
      DTs but driver support for USB, GPU and other pieces are starting to
      trickle in. This might end up being a well-supported SoC upstream if
      the momentum keeps up.
 
  - Renesas:
    + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted
      SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly
      awaiting more. So far, basic drivers such as serial, gpios, PMU and
      ethernet are enabled.
    + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
      GPU. Same here, basic set of drivers such as serial, gpios and ethernet
      enabled, and SMP support is also forthcoming.
 
  - STMicroelectronics:
    + STM32F469, very similar tih STM32F429 but with display support
 
 Enhancements to SoCs/platforms (DTS contents, some driver portions might
 not be in yet):
 
  - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
  - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
  - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
  - Marvell Berlin2CD: SMP support, thermal sensors
  - Mediatek MT7623: Highspeed DMA, audio support
  - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
  - Renesas: Watchdog and PMU support across many platforms
  - Rockchip RK3399: USB3 OTG support
  - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
  - STMicro STM32: Lots of peripherals added to STM32MP175C
  - Uniphier: Ethernet support
 
 New boards:
 
  - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
  - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
  - Allwinner A33: Nintendo NES/SuperNES Classic Edition
  - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
  - Berlin2CD: Valve Steam Link
  - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
  - Broadcom: Raspberry Pi 3 B+
  - Mediatek MT7623N and MT7623A: reference boards
  - Meson 8M2: Tronsmart MXIII Plus
  - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
  - Qualcomm MSM8974: Sony Xperia Z1 Compact support
  - Qualcomm SDM845: MTP development board
  - Renesas: Ebisu R8A77990 board
  - Renesas RZ/G1C: iwg23s: iWave G235-SDB
  - TI am335x: Pocketbeagle support
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfBtUPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3wfYQAI1hlPhRx7H1zbc59zdlW6daY7y1+dXuqoCs
 K5Hxsurlsbnx9fjeGcBp/razL5YtdZmBYII8IBhKzhLKp/A0gqmX7W9pTNQj9/Sp
 SOIl8dci/yr0HUpgwc4IdVhJBdpplv48GK3q8opSocI/J9dnD873NHLlvTpCB+Jy
 GCD9tB56JnOfTO+n0Yg+tyuig1jIQCc52Iwnmxv2vYPbsHUaEmqz1Z+wBe0BaDk+
 eVsohNQI/2xxRzv8PE13H/ojcZ532rF45aw6ypRwCvg1MzCYXSdKLJlIWx8Ci581
 YmRPlCOWai+AxSATgJhIR9n9dxn6hqxEgVyu7AOxPVa0O4DKB3oy8PPo5wlOCKcU
 J1n5zJwnULWw4eVa1ag/cEMbz95QMC1F9MmyiLUfz3esHwyD/Gl3ks9v1gwn9XYp
 xsI+oGnMy/Uz4oZ1/XM5CO5UUDXyixVD3pYEF8wLaYX2JY8zETI5qfvNL0bwZX3P
 lLFCI7Xdwsk3+HCp7aHs4KkWHLVGq65SxrXKTIpU+vEq+0RYiV/cWP9Swa/RNrMH
 gB00oZ2TBRuIr/KxsCKyCkKApocW4J4WtZ2sMY7QDXzW68lq8oIbefY+6Abgk4/7
 6J7D5n0gmTB38wrzZCY5UF0eQrLjPwnxuLywEll5oLFbNTr/7Aruk2kFYEMGjM9E
 QmXGoHXU
 =jLvk
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Olof Johansson:
 "As always, a large number of DT updates. Too many to enumerate them
  all, but at a glance:

  New SoCs introduced in this release:

   - Amlogic:
      + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
        set top boxes and other products.

   - Mediatek:
      + MT7623A, which is a flavor of the MT7623 family with other
        on-chip ethernet options.

   - Qualcomm:
      + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
        (Cortex-A75/A55 derivative) SoC that's one of the current
        high-end mobile SoCs.

        It's great to see mainline support for it. So far, you can't do
        much with it, since a lot of peripherals are not yet in the DTs
        but driver support for USB, GPU and other pieces are starting to
        trickle in. This might end up being a well-supported SoC
        upstream if the momentum keeps up.

   - Renesas:
      + R8A77990, a.k.a R-Car E3, a new automotive
        entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
        enabled, we are eagerly awaiting more. So far, basic drivers
        such as serial, gpios, PMU and ethernet are enabled.
      + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
        GPU. Same here, basic set of drivers such as serial, gpios and
        ethernet enabled, and SMP support is also forthcoming.

   - STMicroelectronics:
      + STM32F469, very similar tih STM32F429 but with display support

  Enhancements to SoCs/platforms (DTS contents, some driver portions
  might not be in yet):
   - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
   - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
   - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
   - Marvell Berlin2CD: SMP support, thermal sensors
   - Mediatek MT7623: Highspeed DMA, audio support
   - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
   - Renesas: Watchdog and PMU support across many platforms
   - Rockchip RK3399: USB3 OTG support
   - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
   - STMicro STM32: Lots of peripherals added to STM32MP175C
   - Uniphier: Ethernet support

  New boards:
   - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
   - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
   - Allwinner A33: Nintendo NES/SuperNES Classic Edition
   - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
   - Berlin2CD: Valve Steam Link
   - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
   - Broadcom: Raspberry Pi 3 B+
   - Mediatek MT7623N and MT7623A: reference boards
   - Meson 8M2: Tronsmart MXIII Plus
   - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
   - Qualcomm MSM8974: Sony Xperia Z1 Compact support
   - Qualcomm SDM845: MTP development board
   - Renesas: Ebisu R8A77990 board
   - Renesas RZ/G1C: iwg23s: iWave G235-SDB
   - TI am335x: Pocketbeagle support"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
  ARM: dts: aspeed: Fix hwrng register address
  arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
  arm64: dts: sprd: Add GPIO and GPIO keys device nodes
  arm64: dts: sprd: fix typo in 'remote-endpoint'
  arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
  arm64: dts: fix regulator property name for wlan pcie endpoint
  arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
  ARM: dts: pxa3xx: fix MMC clocks
  ARM: pxa: dts: add pin definitions for extended GPIOs
  ARM: pxa: dts: add gpio-ranges to gpio controller
  ARM: dts: ipq8074: Enable few peripherals for hk01 board
  ARM: dts: ipq8074: Add pcie nodes
  ARM: dts: ipq8074: Add peripheral nodes
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
  ARM: dts: ipq4019: Change the max opp frequency
  ...
2018-06-11 17:57:38 -07:00
Linus Torvalds
7c00e8ae04 ARM: SoC platform updates
Here are the main updates for SoC support (besides DT additions) for ARM
 32- and 64-bit platforms. The branch also contains defconfig updates to
 turn on drivers and options as needed on the various platforms.
 
 The largest parts of the delta are from cleanups moving platform data
 and board file setup of TI platforms to ti-sysc bus drivers. There are
 also some sweeping changes of eeprom and nand setup on Davinci, i.MX
 and other platforms.
 
 Samsung is removing support for Exynos5440, which was an oddball SoC
 that hasn't been seen much use in designs.
 
 Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
 
 Linus Walleij is also removing support for ux500 (Sony Ericsson)
 U8540/9540 SoCs that never made it to significant mass production and
 products.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCGIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Ks8P/3j87Za+6OTCzo+lW2byUy1CI4muGwxNSIxX
 65A1Wt2qvRDxjCX4MI5Cx8P1YdYJv+5ZF2p4vdlgQXoz3/XDbG+lxJ+/lyWl/+MK
 9kGsQWwEVicbGkaJCYR4ZKvfAwZ9jf7+cndY0Vgii44xQLsQZHEIfIO+mdlK43GZ
 xqaSckLQQzsDqjMUIckiyVy97RsDk1eLK+H2I+l7qs9v0z5UnhoD2CTxX5LzT8eH
 NlFmfUPN7Znshmt0aMznZyBRr2oM5Dsg49SfG0WhbOzyiZjSpw8MQ0N+RzyROhhB
 h5PjyuZN9fx2dO8Jjkqt3B8KmGFNDarGOmrasIJeCJDFRa9NStqFn0y4qJXS2wU7
 4La3GoBYRV8x0gq339pQ+70qKuD06e62GL7kV656yi+93CitWxy6IjrIACjSX6zH
 PD1hQpewfXAcHAHdBqNevRcz/sjG+36GJSCgI4umSP48NMlCuZafFAT4U/PVlt4E
 6VRQDeoi5ZFYIuPL1+bZvHax4fFxJGnaf02uQ/OPYP1o48AueSSvdo6bUPFbhwOD
 u0/uo3r+HxtQsw9I3tP3kj3/775BJclkO6zbG/dGZ8obuzuDwhuFtr3rzCrP/IzN
 n3rcBuFNZE6SQeKU+Tvmnh8ZLhJc5L8EYvqmihZj+BSfprBc8POFR2la4MRnHSn+
 tPEC/n9E
 =S5wc
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...
2018-06-11 17:49:09 -07:00
Linus Torvalds
410feb75de arm64 updates for 4.18:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support for
   arm64 using SMC firmware call to set a hardware chicken bit
 
 - ACPI PPTT (Processor Properties Topology Table) parsing support and
   enable the feature for arm64
 
 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
   primary motivation is Scalable Vector Extensions which requires more
   space on the signal frame than the currently defined MINSIGSTKSZ
 
 - ARM perf patches: allow building arm-cci as module, demote dev_warn()
   to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups
 
 - cmpwait() WFE optimisation to avoid some spurious wakeups
 
 - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have
   to do with some network allocations) while keeping ARCH_DMA_MINALIGN
   to 128. cache_line_size() returns the actual hardware Cache Writeback
   Granule
 
 - Turn LSE atomics on by default in Kconfig
 
 - Kernel fault reporting tidying
 
 - Some #include and miscellaneous cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlsaoqsACgkQa9axLQDI
 XvH+8RAAqRCrEtkNPS7zxHyMK/D2cxSy9EVtlJ1sxhmsONEe5t5MDTWX9byobQ5A
 PAKMSQBQgUvecqHLOtD7SJWef1il30zgWmc/yPcgNv3OsA1Au7j2g3ht/Drw+N5I
 Vy0aOUEtw+Jzs7y/CJyl6lufSkkOzszOujt2Nybiz6omztOrwkW9isKnURzQBNj5
 gquZI35h604YJ9F0TqS6ZqU7tNcuB9q02FxvVBpLmb83jP4jSEjYACUJwVVxvEAB
 UXjdD4N130rRXDS5OMRWo5+4SAj+kPYhdVYEvaDx7xTOIRHhXK05GlJbsUAc5E6l
 xy810fH5Dm0diYpVvYWTA5J+BU1jNOvCys5zKWl7gs2P8YB59PdqY4M2YBPNGb5H
 PaVgq73TZAsww6ZInbZlK+wZOIxZZIOf//Z+QKn6EPtu3RmzIFWwyttTj01w1E3i
 LhjcUoGnvxJFcMoCr59ihDwfP9nkCVrNc4REOGaWDk6L/t/bOfaZfDz+OCGbwQdL
 akCFKZI6q5O/no+YfhtdtNFpCQb/Bo1J88KuotICRXq8z4vO41zIG53bi97W8QeG
 rCBiX0NxUxYJ3ybus7kZHTmMGieMyEHP28n12QffwvJj4vJBsUXQBrV8hclx0djZ
 HMt7iPi/0BW6nVV7ngIgN3cdCpaDCEGRsfO4Ch0rFZrC9UbYQnE=
 =uums
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Apart from the core arm64 and perf changes, the Spectre v4 mitigation
  touches the arm KVM code and the ACPI PPTT support touches drivers/
  (acpi and cacheinfo). I should have the maintainers' acks in place.

  Summary:

   - Spectre v4 mitigation (Speculative Store Bypass Disable) support
     for arm64 using SMC firmware call to set a hardware chicken bit

   - ACPI PPTT (Processor Properties Topology Table) parsing support and
     enable the feature for arm64

   - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
     primary motivation is Scalable Vector Extensions which requires
     more space on the signal frame than the currently defined
     MINSIGSTKSZ

   - ARM perf patches: allow building arm-cci as module, demote
     dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
     cleanups

   - cmpwait() WFE optimisation to avoid some spurious wakeups

   - L1_CACHE_BYTES reverted back to 64 (for performance reasons that
     have to do with some network allocations) while keeping
     ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
     hardware Cache Writeback Granule

   - Turn LSE atomics on by default in Kconfig

   - Kernel fault reporting tidying

   - Some #include and miscellaneous cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
  arm64: Fix syscall restarting around signal suppressed by tracer
  arm64: topology: Avoid checking numa mask for scheduler MC selection
  ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
  arm64: cpu_errata: include required headers
  arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
  arm64: signal: Report signal frame size to userspace via auxv
  arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
  arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
  arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
  arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
  arm64: KVM: Add HYP per-cpu accessors
  arm64: ssbd: Add prctl interface for per-thread mitigation
  arm64: ssbd: Introduce thread flag to control userspace mitigation
  arm64: ssbd: Restore mitigation status on CPU resume
  arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
  arm64: ssbd: Add global mitigation state accessor
  arm64: Add 'ssbd' command-line option
  arm64: Add ARCH_WORKAROUND_2 probing
  arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
  arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
  ...
2018-06-08 11:10:58 -07:00
Dave Martin
0fe42512b2 arm64: Fix syscall restarting around signal suppressed by tracer
Commit 17c2895 ("arm64: Abstract syscallno manipulation") abstracts
out the pt_regs.syscallno value for a syscall cancelled by a tracer
as NO_SYSCALL, and provides helpers to set and check for this
condition.  However, the way this was implemented has the
unintended side-effect of disabling part of the syscall restart
logic.

This comes about because the second in_syscall() check in
do_signal() re-evaluates the "in a syscall" condition based on the
updated pt_regs instead of the original pt_regs.  forget_syscall()
is explicitly called prior to the second check in order to prevent
restart logic in the ret_to_user path being spuriously triggered,
which means that the second in_syscall() check always yields false.

This triggers a failure in
tools/testing/selftests/seccomp/seccomp_bpf.c, when using ptrace to
suppress a signal that interrups a nanosleep() syscall.

Misbehaviour of this type is only expected in the case where a
tracer suppresses a signal and the target process is either being
single-stepped or the interrupted syscall attempts to restart via
-ERESTARTBLOCK.

This patch restores the old behaviour by performing the
in_syscall() check only once at the start of the function.

Fixes: 17c2895860 ("arm64: Abstract syscallno manipulation")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.14.x-
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-08 13:21:39 +01:00
Masahiro Yamada
f3a53f7b57 arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
This becomes much neater in Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-08 18:56:02 +09:00
Linus Torvalds
68abbe7295 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc things

 - ocfs2 updates

 - v9fs updates

 - MM

 - procfs updates

 - lib/ updates

 - autofs updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  autofs: small cleanup in autofs_getpath()
  autofs: clean up includes
  autofs: comment on selinux changes needed for module autoload
  autofs: update MAINTAINERS entry for autofs
  autofs: use autofs instead of autofs4 in documentation
  autofs: rename autofs documentation files
  autofs: create autofs Kconfig and Makefile
  autofs: delete fs/autofs4 source files
  autofs: update fs/autofs4/Makefile
  autofs: update fs/autofs4/Kconfig
  autofs: copy autofs4 to autofs
  autofs4: use autofs instead of autofs4 everywhere
  autofs4: merge auto_fs.h and auto_fs4.h
  fs/binfmt_misc.c: do not allow offset overflow
  checkpatch: improve patch recognition
  lib/ucs2_string.c: add MODULE_LICENSE()
  lib/mpi: headers cleanup
  lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock
  lib/idr.c: remove simple_ida_lock
  lib/bitmap.c: micro-optimization for __bitmap_complement()
  ...
2018-06-07 18:39:37 -07:00
Laurent Dufour
3010a5ea66 mm: introduce ARCH_HAS_PTE_SPECIAL
Currently the PTE special supports is turned on in per architecture
header files.  Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.

This patch introduce a new configuration variable to manage this
directly in the Kconfig files.  It would later replace
__HAVE_ARCH_PTE_SPECIAL.

Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:

arm
 __HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.

powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
 - arch/powerpc/include/asm/book3s/64/pgtable.h
 - arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.

sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64

There is no functional change introduced by this patch.

Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:34:35 -07:00
Linus Torvalds
3a3869f1c4 pci-v4.18-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R
 gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI
 p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH
 QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr
 grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+
 v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa
 46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl
 O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh
 OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE
 furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL
 KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R
 kpJ1VPTKK1XN64I=
 =aFAi
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - unify AER decoding for native and ACPI CPER sources (Alexandru
    Gagniuc)

  - add TLP header info to AER tracepoint (Thomas Tai)

  - add generic pcie_wait_for_link() interface (Oza Pawandeep)

  - handle AER ERR_FATAL by removing and re-enumerating devices, as
    Downstream Port Containment does (Oza Pawandeep)

  - factor out common code between AER and DPC recovery (Oza Pawandeep)

  - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)

  - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)

  - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

  - respect platform ownership of LTR (Bjorn Helgaas)

  - clear interrupt status in top half to avoid interrupt storm (Oza
    Pawandeep)

  - neaten pci=earlydump output (Andy Shevchenko)

  - avoid errors when extended config space inaccessible (Gilles Buloz)

  - prevent sysfs disable of device while driver attached (Christoph
    Hellwig)

  - use core interface to report PCIe link properties in bnx2x, bnxt_en,
    cxgb4, ixgbe (Bjorn Helgaas)

  - remove unused pcie_get_minimum_link() (Bjorn Helgaas)

  - fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn
    Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use
    ACPI hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

  - fix an SHPC quirk that mistakenly included *all* AMD bridges as well
    as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)

  - assign a bus number even to non-native hotplug bridges to leave
    space for acpiphp additions, to fix a common Thunderbolt xHCI
    hot-add failure (Mika Westerberg)

  - keep acpiphp from scanning native hotplug bridges, to fix common
    Thunderbolt hot-add failures (Mika Westerberg)

  - improve "partially hidden behind bridge" messages from core (Mika
    Westerberg)

  - add macros for PCIe Link Control 2 register (Frederick Lawler)

  - replace IB/hfi1 custom macros with PCI core versions (Frederick
    Lawler)

  - remove dead microblaze and xtensa code (Bjorn Helgaas)

  - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)

  - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
    Helgaas)

  - add managed interface to get PCI host bridge resources from OF (Jan
    Kiszka)

  - add support for unbinding generic PCI host controller (Jan Kiszka)

  - fix memory leaks when unbinding generic PCI host controller (Jan
    Kiszka)

  - request legacy VGA framebuffer only for VGA devices to avoid false
    device conflicts (Bjorn Helgaas)

  - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
    like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

  - add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

  - enable register clock for Armada 7K/8K (Gregory CLEMENT)

  - reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo
    Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

  - fix DesignWare enumeration below bridges (Koen Vandeputte)

  - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

  - update Layerscape maintainer email addresses (Minghuan Lian)

  - add COMPILE_TEST to improve build test coverage (Rob Herring)

  - fix Hyper-V bus registration failure caused by domain/serial number
    confusion (Sridhar Pitchai)

  - improve Hyper-V refcounting and coding style (Stephen Hemminger)

  - avoid potential Hyper-V hang waiting for a response that will never
    come (Dexuan Cui)

  - implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

  - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

  - add Mobiveil MSI support (Subrahmanya Lingappa)

  - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
    (Marek Vasut)

  - poll more frequently (5us vs 5ms) while waiting for R-Car data link
    active (Marek Vasut)

  - use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

  - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

  - add R-Car gen3 PHY support (Sergei Shtylyov)

  - improve R-Car PHYRDY polling (Sergei Shtylyov)

  - clean up R-Car macros (Marek Vasut)

  - use runtime PM for R-Car controller clock (Dien Pham)

  - update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint
    mode (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

  - support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

  - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
    selections (Bjorn Helgaas)

  - clean up quirks.c organization and whitespace (Bjorn Helgaas)

* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
  PCI/AER: Replace struct pcie_device with pci_dev
  PCI/AER: Remove unused parameters
  PCI: qcom: Include gpio/consumer.h
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: mobiveil: Add MSI support
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
  PCI/AER: Decode Error Source Requester ID
  PCI/AER: Remove aer_recover_work_func() forward declaration
  PCI/DPC: Use the generic pcie_do_fatal_recovery() path
  PCI/AER: Pass service type to pcie_do_fatal_recovery()
  PCI/DPC: Disable ERR_NONFATAL handling by DPC
  ...
2018-06-07 12:45:58 -07:00
Jeremy Linton
e156ab71a9 arm64: topology: Avoid checking numa mask for scheduler MC selection
The numa mask subset check can often lead to system hang or crash during
CPU hotplug and system suspend operation if NUMA is disabled. This is
mostly observed on HMP systems where the CPU compute capacities are
different and ends up in different scheduler domains. Since
cpumask_of_node is returned instead core_sibling, the scheduler is
confused with incorrect cpumasks(e.g. one CPU in two different sched
domains at the same time) on CPU hotplug.

Lets disable the NUMA siblings checks for the time being, as NUMA in
socket machines have LLC's that will assure that the scheduler topology
isn't "borken".

The NUMA check exists to assure that if a LLC within a socket crosses
NUMA nodes/chiplets the scheduler domains remain consistent. This code will
likely have to be re-enabled in the near future once the NUMA mask story
is sorted.  At the moment its not necessary because the NUMA in socket
machines LLC's are contained within the NUMA domains.

Further, as a defensive mechanism during hot-plug, lets assure that the
LLC siblings are also masked.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-07 17:42:11 +01:00
Linus Torvalds
1c8c5a9d38 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...
2018-06-06 18:39:49 -07:00
Linus Torvalds
8450493076 * Stratix10 SDRAM support to altera_edac (Thor Thayer)
* the usual misc fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlsVQ/cACgkQEsHwGGHe
 VUrrVA/+NHpCe0dT97Q4NHZejusOZvujNdOeAZVMNVcg5fwFmwwXkStazY+J/lmK
 Zjh2P/JGVoL9CPCn/ya+F6KSDJPLaq0AQCpogEhDqEZrRcutWu/CtH2XEbjyknME
 LCGfaKRBbi1zxCEm8qCk3ghWO3rXtM14jLkuqPVxtCsBT9HXcBAXU/ivok23Yb4r
 d/NcoeV5veqFzdPMxkYRJFN9Me4uVN+MzoN9hhxTYll5n0eWhb7Aw8Aon8VR6OH5
 LSJFmxFOlE7OPHQ0AjBRiF0Q9MyUSFTWvn+i4rhSq1z8SCPZyPkG2YRNVDWS6Py9
 cLXSNMnv6ybPBst9LUMXjN06DBsnzeWNcsFFPw5uunD9JRFuaoxUgk633BLWMy2z
 Tx4fiwOligx65Fc4udQ1n2Ho5HKZaTHlafYDatYt3jecx71BQywnMi1zuwMnF+Id
 iHW0J413h1P0UZfeTZHGfv+THQNb+IoVDjWdY2nNil45OR1QCBva+CQVKCcB8xox
 RCW6yL1S7V2dzd4255F/xpMrbkvxeAaOBWWJqEQeUdsFGP//6Ub9Gy0IKsSDrHQ6
 3BtoOxGmBKCBCpysN7OtUUvC28Dd9PQCkH+Bn3SAjySWnEiTEdv6QeLdScJrsz75
 lcF4d17EKt2VtdX6z15QAGT9LMbRR177pizea03XDeFwb+eR0cA=
 =yBvi
 -----END PGP SIGNATURE-----

Merge tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - Stratix10 SDRAM support to altera_edac (Thor Thayer)

 - the usual misc fixes all over the place

[ Also, shared branch for socfpga_stratix10.dtsi file changes with the
  socfpga tree ]

* tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Make platform-based whitelisting x86-only
  EDAC, altera: Fix ARM64 build warning
  EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m
  EDAC, ghes: Use BIT() macro
  EDAC, ghes: Add DDR4 and NVDIMM memory types
  EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10
  Documentation: dt: edac: Move Altera SOCFPGA EDAC file
  EDAC, altera: Add support for Stratix10 SDRAM EDAC
  Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
  EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()
  arm64: dts: stratix10: add sdram ecc
  EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
  EDAC, ghes: Add a null pointer check in ghes_edac_unregister()
  ghes, EDAC: Fix ghes_edac registration
  arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
  ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
  arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts
  arm64: dts: stratix10: enable i2c, add i2c periperals
  arm64: dts: stratix10: use clock bindings for the Stratix10 platform
2018-06-06 15:36:13 -07:00
Linus Torvalds
8715ee75fe Kbuild updates for v4.18
- improve fixdep to coalesce consecutive slashes in dep-files
 
 - fix some issues of the maintainer string generation in deb-pkg script
 
 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts
 
 - clean-up modpost
 
 - allow to enable the dead code/data elimination for PowerPC in EXPERT mode
 
 - improve two coccinelle scripts for better performance
 
 - pass endianness and machine size flags to sparse for all architecture
 
 - misc fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbF/yvAAoJED2LAQed4NsGEPgP/2qBg7w4raGvQtblqGY1qo6j
 3xGKYUKdg3GhIRf1zB9lPwkAmQcyLKzKlet/gYoTUTLKbfRUX8wDzJf/3TV0kpLW
 QQ2HM1/jsqrD1HSO21OPJ1rzMSNn1NcOSLWSeOLWUBorHkkvAHlenJcJSOo6szJr
 tTgEN78T/9id/artkFqdG+1Q3JhnI5FfH3u0lE20Eqxk5AAxrUKArHYsgRjgOg9o
 8DlHDTRsnTiUd4TtmC+VYSZK1BHz1ORlANaRiL69T+BGFZGNCvRSV09QkaD+ObxT
 dB4TTJne32Qg6g5qYX0bzLqfRdfJ8tpmJGQkycf3OT1rLgmDbWFaaOEDQTAe3mSw
 nT6ZbpQB1OoTgMD2An9ApWfUQRfsMnujm/pRP+BkRdKKkMJvXJCH7PvFw8rjqTt3
 PjK6DGbpG6H0G+DePtthMHrz/TU6wi5MFf7kQxl0AtFmpa3R0q67VhdM04BEYNCq
 Dbs1YaXWKKi101k14oSQ0kmRasZ9Jz5tvyfZ7wvy1LpGONXxtEbc6JQyBJ6tmf4f
 fCAxvHLSb/TQSmJhk9Rch7uPYT9B9hC16dseMrF9Pab8yR346fz70L1UdFE10j3q
 iKFbYkueq8uJCJDxNktsgHzbOF6Le5vaWauOafRN26K7p7+CRpVOy0O2bknX3yDa
 hKOGzCfQjT8sfdMmtyIH
 =2LYT
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - improve fixdep to coalesce consecutive slashes in dep-files

 - fix some issues of the maintainer string generation in deb-pkg script

 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts

 - clean-up modpost

 - allow to enable the dead code/data elimination for PowerPC in EXPERT
   mode

 - improve two coccinelle scripts for better performance

 - pass endianness and machine size flags to sparse for all architecture

 - misc fixes

* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: add machine size to CHECKFLAGS
  kbuild: add endianness flag to CHEKCFLAGS
  kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
  scripts: Fixed printf format mismatch
  scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
  coccinelle: deref_null: improve performance
  coccinelle: mini_lock: improve performance
  powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
  kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
  kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
  kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
  modpost: constify *modname function argument where possible
  modpost: remove redundant is_vmlinux() test
  modpost: use strstarts() helper more widely
  modpost: pass struct elf_info pointer to get_modinfo()
  checkpatch: remove VMLINUX_SYMBOL() check
  vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
  kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
  export.h: remove code for prefixing symbols with underscore
  depmod.sh: remove symbol prefix support
  ...
2018-06-06 11:00:15 -07:00
Linus Torvalds
3e1a29b3bf Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:

   - Decryption test vectors are now automatically generated from
     encryption test vectors.

  Algorithms:

   - Fix unaligned access issues in crc32/crc32c.

   - Add zstd compression algorithm.

   - Add AEGIS.

   - Add MORUS.

  Drivers:

   - Add accelerated AEGIS/MORUS on x86.

   - Add accelerated SM4 on arm64.

   - Removed x86 assembly salsa implementation as it is slower than C.

   - Add authenc(hmac(sha*), cbc(aes)) support in inside-secure.

   - Add ctr(aes) support in crypto4xx.

   - Add hardware key support in ccree.

   - Add support for new Centaur CPU in via-rng"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
  crypto: chtls - free beyond end rspq_skb_cache
  crypto: chtls - kbuild warnings
  crypto: chtls - dereference null variable
  crypto: chtls - wait for memory sendmsg, sendpage
  crypto: chtls - key len correction
  crypto: salsa20 - Revert "crypto: salsa20 - export generic helpers"
  crypto: x86/salsa20 - remove x86 salsa20 implementations
  crypto: ccp - Add GET_ID SEV command
  crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command
  crypto: qat - Add MODULE_FIRMWARE for all qat drivers
  crypto: ccree - silence debug prints
  crypto: ccree - better clock handling
  crypto: ccree - correct host regs offset
  crypto: chelsio - Remove separate buffer used for DMA map B0 block in CCM
  crypt: chelsio - Send IV as Immediate for cipher algo
  crypto: chelsio - Return -ENOSPC for transient busy indication.
  crypto: caam/qi - fix warning in init_cgr()
  crypto: caam - fix rfc4543 descriptors
  crypto: caam - fix MC firmware detection
  crypto: clarify licensing of OpenSSL asm code
  ...
2018-06-05 15:51:21 -07:00
Arnd Bergmann
94a5d8790e arm64: cpu_errata: include required headers
Without including psci.h and arm-smccc.h, we now get a build failure in
some configurations:

arch/arm64/kernel/cpu_errata.c: In function 'arm64_update_smccc_conduit':
arch/arm64/kernel/cpu_errata.c:278:10: error: 'psci_ops' undeclared (first use in this function); did you mean 'sysfs_ops'?

arch/arm64/kernel/cpu_errata.c: In function 'arm64_set_ssbd_mitigation':
arch/arm64/kernel/cpu_errata.c:311:3: error: implicit declaration of function 'arm_smccc_1_1_hvc' [-Werror=implicit-function-declaration]
   arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-05 16:51:31 +01:00
Linus Torvalds
ba252f16e4 Merge branch 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time/Y2038 updates from Thomas Gleixner:

 - Consolidate SySV IPC UAPI headers

 - Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism

 - Cleanup the core interfaces and standardize on the ktime_get_* naming
   convention.

 - Convert the X86 platform ops to timespec64

 - Remove the ugly temporary timespec64 hack

* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86: Convert x86_platform_ops to timespec64
  timekeeping: Add more coarse clocktai/boottime interfaces
  timekeeping: Add ktime_get_coarse_with_offset
  timekeeping: Standardize on ktime_get_*() naming
  timekeeping: Clean up ktime_get_real_ts64
  timekeeping: Remove timespec64 hack
  y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop
  y2038: ipc: Enable COMPAT_32BIT_TIME
  y2038: ipc: Use __kernel_timespec
  y2038: ipc: Report long times to user space
  y2038: ipc: Use ktime_get_real_seconds consistently
  y2038: xtensa: Extend sysvipc data structures
  y2038: powerpc: Extend sysvipc data structures
  y2038: sparc: Extend sysvipc data structures
  y2038: parisc: Extend sysvipc data structures
  y2038: mips: Extend sysvipc data structures
  y2038: arm64: Extend sysvipc compat data structures
  y2038: s390: Remove unneeded ipc uapi header files
  y2038: ia64: Remove unneeded ipc uapi header files
  y2038: alpha: Remove unneeded ipc uapi header files
  ...
2018-06-04 21:02:18 -07:00
Linus Torvalds
0bbcce5d1e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:

 - Core infrastucture work for Y2038 to address the COMPAT interfaces:

     + Add a new Y2038 safe __kernel_timespec and use it in the core
       code

     + Introduce config switches which allow to control the various
       compat mechanisms

     + Use the new config switch in the posix timer code to control the
       32bit compat syscall implementation.

 - Prevent bogus selection of CPU local clocksources which causes an
   endless reselection loop

 - Remove the extra kthread in the clocksource code which has no value
   and just adds another level of indirection

 - The usual bunch of trivial updates, cleanups and fixlets all over the
   place

 - More SPDX conversions

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  clocksource/drivers/mxs_timer: Switch to SPDX identifier
  clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
  clocksource/drivers/timer-imx-gpt: Remove outdated file path
  clocksource/drivers/arc_timer: Add comments about locking while read GFRC
  clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
  clocksource/drivers/sprd: Fix Kconfig dependency
  clocksource: Move inline keyword to the beginning of function declarations
  timer_list: Remove unused function pointer typedef
  timers: Adjust a kernel-doc comment
  tick: Prefer a lower rating device only if it's CPU local device
  clocksource: Remove kthread
  time: Change nanosleep to safe __kernel_* types
  time: Change types to new y2038 safe __kernel_* types
  time: Fix get_timespec64() for y2038 safe compat interfaces
  time: Add new y2038 safe __kernel_timespec
  posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_COMPAT_32BIT_TIME
  time: Introduce CONFIG_64BIT_TIME in architectures
  compat: Enable compat_get/put_timespec64 always
  ...
2018-06-04 20:27:54 -07:00
Linus Torvalds
92400b8c8b Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:

 - Lots of tidying up changes all across the map for Linux's formal
   memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
   Parri, Paul E. McKenney and SeongJae Park.

   Notable changes beyond an overall update in the tooling itself is the
   tidying up of spin_is_locked() semantics, which spills over into the
   kernel proper as well.

 - qspinlock improvements: the locking algorithm now guarantees forward
   progress whereas the previous implementation in mainline could starve
   threads indefinitely in cmpxchg() loops. Also other related cleanups
   to the qspinlock code (Will Deacon)

 - misc smaller improvements, cleanups and fixes all across the locking
   subsystem

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  locking/rwsem: Simplify the is-owner-spinnable checks
  tools/memory-model: Add reference for 'Simplifying ARM concurrency'
  tools/memory-model: Update ASPLOS information
  MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
  tools/memory-model: Fix coding style in 'lock.cat'
  tools/memory-model: Remove out-of-date comments and code from lock.cat
  tools/memory-model: Improve mixed-access checking in lock.cat
  tools/memory-model: Improve comments in lock.cat
  tools/memory-model: Remove duplicated code from lock.cat
  tools/memory-model: Flag "cumulativity" and "propagation" tests
  tools/memory-model: Add model support for spin_is_locked()
  tools/memory-model: Add scripts to test memory model
  tools/memory-model: Fix coding style in 'linux-kernel.def'
  tools/memory-model: Model 'smp_store_mb()'
  tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
  tools/memory-order: Improve key for SELF and SV
  tools/memory-model: Fix cheat sheet typo
  tools/memory-model: Update required version of herdtools7
  tools/memory-model: Redefine rb in terms of rcu-fence
  tools/memory-model: Rename link and rcu-path to rcu-link and rb
  ...
2018-06-04 16:40:11 -07:00
Linus Torvalds
93e95fa574 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...
2018-06-04 15:23:48 -07:00
Linus Torvalds
e5a594643a dma-mapping updates for 4.18:
- replaceme the force_dma flag with a dma_configure bus method.
    (Nipun Gupta, although one patch is іncorrectly attributed to me
     due to a git rebase bug)
  - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
  - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
    right thing for bounce buffering.
  - move dma-debug initialization to common code, and apply a few cleanups
    to the dma-debug code.
  - cleanup the Kconfig mess around swiotlb selection
  - swiotlb comment fixup (Yisheng Xie)
  - a trivial swiotlb fix. (Dan Carpenter)
  - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
  - add a new generic dma-noncoherent dma_map_ops implementation and use
    it for arc, c6x and nds32.
  - improve scatterlist validity checking in dma-debug. (Robin Murphy)
  - add a struct device quirk to limit the dma-mask to 32-bit due to
    bridge/system issues, and switch x86 to use it instead of a local
    hack for VIA bridges.
  - handle devices without a dma_mask more gracefully in the dma-direct
    code.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlsU1hwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPraxAAocC7JiFKW133/VugCtGA1x9uE8DPHealtsWTAeEq
 KOOB3GxWMU2hKqQ4km5tcfdWoGJvvab6hmDXcitzZGi2JajO7Ae0FwIy3yvxSIKm
 iH/ON7c4sJt8gKrXYsLVylmwDaimNs4a6xfODoCRgnWuovI2QrrZzupnlzPNsiOC
 lv8ezzcW+Ay/gvDD/r72psO+w3QELETif/OzR/qTOtvLrVabM06eHmPQ8Wb98smu
 /UPMMv6/3XwQnxpxpdyqN+p/gUdneXithzT261wTeZ+8gDXmcWBwHGcMBCimcoBi
 FklW52moazIPIsTysqoNlVFsLGJTeS4p2D3BLAp5NwWYsLv+zHUVZsI1JY/8u5Ox
 mM11LIfvu9JtUzaqD9SvxlxIeLhhYZZGnUoV3bQAkpHSQhN/xp2YXd5NWSo5ac2O
 dch83+laZkZgd6ryw6USpt/YTPM/UHBYy7IeGGHX/PbmAke0ZlvA6Rae7kA5DG59
 7GaLdwQyrHp8uGFgwze8P+R4POSk1ly73HHLBT/pFKnDD7niWCPAnBzuuEQGJs00
 0zuyWLQyzOj1l6HCAcMNyGnYSsMp8Fx0fvEmKR/EYs8O83eJKXi6L9aizMZx4v1J
 0wTolUWH6SIIdz474YmewhG5YOLY7mfe9E8aNr8zJFdwRZqwaALKoteRGUxa3f6e
 zUE=
 =6Acj
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - replace the force_dma flag with a dma_configure bus method. (Nipun
   Gupta, although one patch is іncorrectly attributed to me due to a
   git rebase bug)

 - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)

 - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
   right thing for bounce buffering.

 - move dma-debug initialization to common code, and apply a few
   cleanups to the dma-debug code.

 - cleanup the Kconfig mess around swiotlb selection

 - swiotlb comment fixup (Yisheng Xie)

 - a trivial swiotlb fix. (Dan Carpenter)

 - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)

 - add a new generic dma-noncoherent dma_map_ops implementation and use
   it for arc, c6x and nds32.

 - improve scatterlist validity checking in dma-debug. (Robin Murphy)

 - add a struct device quirk to limit the dma-mask to 32-bit due to
   bridge/system issues, and switch x86 to use it instead of a local
   hack for VIA bridges.

 - handle devices without a dma_mask more gracefully in the dma-direct
   code.

* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
  dma-direct: don't crash on device without dma_mask
  nds32: use generic dma_noncoherent_ops
  nds32: implement the unmap_sg DMA operation
  nds32: consolidate DMA cache maintainance routines
  x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
  x86/pci-dma: remove the explicit nodac and allowdac option
  x86/pci-dma: remove the experimental forcesac boot option
  Documentation/x86: remove a stray reference to pci-nommu.c
  core, dma-direct: add a flag 32-bit dma limits
  dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
  dma-debug: check scatterlist segments
  c6x: use generic dma_noncoherent_ops
  arc: use generic dma_noncoherent_ops
  arc: fix arc_dma_{map,unmap}_page
  arc: fix arc_dma_sync_sg_for_{cpu,device}
  arc: simplify arc_dma_sync_single_for_{cpu,device}
  dma-mapping: provide a generic dma-noncoherent implementation
  dma-mapping: simplify Kconfig dependencies
  riscv: add swiotlb support
  riscv: only enable ZONE_DMA32 for 64-bit
  ...
2018-06-04 10:58:12 -07:00
David S. Miller
9c54aeb03a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03 09:31:58 -04:00
Catalin Marinas
38500be10e arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
This is to avoid potential merging conflicts between commit 55e3748e89
("arm64: KVM: Add ARCH_WORKAROUND_2 support for guests") and the KVM
tree.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-02 10:42:54 +01:00
Olof Johansson
171d429a1d Renesas ARM64 Based SoC DT Updates for v4.18
* Cleanups:
   - Corresct whitespace
   - sort subnodes of the root and soc nodes
 
 * R-Car M3-N (r8a77965) SoC
   - Describe MSIOF SPI, PWM, SDHI and I2C devices in DT
 
   - Add thermal support
 
 * R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs
   - Decrease temperature hysteresis
 
     Niklas Söderlund says "... decrease the hysteresis from 2C to 1C for
     the two boards we have described upstream. They have no dependencies
     and are ready to be accepted if the review is in favor of them."
 
 * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
   - Add address properties to rcar_sound port nodes
 
     The rcar_sound port nodes have unit names and thus should have register
     properties.
 
 * R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs
   - Enable IPMMU devices
 
     Magnus Damm says "Following the policy of using DT to describe the
     hardware and not software support state, this series makes sure all
     IPMMU devices are enabled in DT for SoCs such as r8a7795, r8a7796,
     r8a77970 and r8a77995."
 
 * R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs
   - Use sysc binding macros
 
     These can be used now that they are present in Linus's tree.
     This is a simple replacement of numeric values with symbolic ones.
 
   - Describe USB2 and USB3 devices in DT
 
 * R-Car V3M (r8a77970) SoC
   - Add SMP Support
 
     Geert Uytterhoeven says "This patch series enables SMP support on the
     R-Car V3M SoC, by adding the second Cortex-A53 CPU core.  It also adds
     the performance monitor unit, and links it to both CPU cores."
 
   - Correct IPMMU DS1 bit number
 
     Magnus Damm says "Judging by "R-Car-Gen3-rev0.80" IPMMU IMSSTR register
     documentation for [R-Car V3M] the DS1 bit field should be bit 0."
 
 * R-Car V3H (r8a77980) SoC
   - Use CPG clock binding macros
 
     These can be used now that they are present in Linus's tree.
     This is a simple replacement of numeric values with symbolic ones.
 
 * R-Car V3H (r8a77980) and V3M (r8a77970) SoCs
   - Disable EtherAVB
 
     Sergei Shtylov says "I'm fixing the issue in the EtherAVB device nodes
     in the R8A779{7|8}0 device trees that missed the "status" prop, usually
     disabling the SoC devices in anticipation that the board device trees
     enable the devices according to their needs. There should be no issues
     with the current R8A779{7|8}0 board device trees, as all of them use
     EtherAVB anyway, so I'm sending the patches generated against the
     'devel' branch..."
 
 * R-Car D3 (r8a77995) SoC
   - Describe VIN4 in DT
 
 * Ebisu board with R-Car E3 (r8a77990) SoC
   - Initial support:
     + PSCI
     + CPU (single)
     + Cache controller
     + Main clocks and controller
     + Interrupt controller
     + Timer
     + PMU
     + Reset controller
     + Product register
     + System controller
     + UART for console
 
 * Salvator-XS boards with R-Car H3 (r8a7795) SoC
   - Enable USB2.0 channel 3
 
 * Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC
   - Enable DU
 
     Kieran Bingham "This series enables the DU for the M3-N R8A77965 SoC,
     and provides output on the VGA and HDMI connectors.
 
     LVDS is not yet supported or tested."
 
 * Salvator-X and Salvator-XS boards with
   R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
   - Enable nable VIN, CSI-2 and ADV7482
 
     Niklas Söderlund says "This series enable capture for H3, M3-W, M3-N
     Salvator-X and Salvator-XS boards. It also adds the VIN and CSI-2 nodes
     for V3M, but as the ADV7482 is on the V3M expansion boards I have
     chosen not include that enablement in this series."
 
   - Add PMIC DDR Backup Power config
 
     Geert Uytterhoeven says " The ROHM BD9571MWV PMIC on the Renesas
     Salvator-X(S) and ULCB development boards supports DDR Backup Power,
     which means that the DDR power rails can be kept powered while the main
     SoC is powered down.
 
     For this to function correctly, the DDR Backup Power configuration
     must be described in DT, which is the topic of this series:
       - The first patch adds the missing device node for the BD9571 PMIC on
         the ULCB boards,
       - The last two patches add DDR Backup Mode configuration for
         Salvator-X(S) and ULCB."
 
   - Add EEPROM
 
     Wolfram Sang says "Add the EEPROM found on Salvator-X and -XS boards
     for H3, M3-W, and M3-N on the IIC_DVFS bus."
 
   - Enable HDMI Sound
 
 * Salvator-X and Salvator-XS boards with
   R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and
   Draak board with R-Car D3 (r8a77995) SoC
   - Consistently name EtherAVB mdio pin group
 
     Geert Uytterhoeven says "When initial support was added for R-Car H3,
     the MDIO pin was forgotten, and the MDC pin got its own group named
     "mdc".  During the addition of support for R-Car M3-W, this mistake was
     noticed.  But as R-Car H3 and M3-W are pin compatible, and can be
     mounted on the same boards, the decision was made to just add the MDIO
     pin to the existing "mdc" group.  Later this was extended to R-Car H3
     ES2.0, and M3-N, because of pin compatibility, and to R-Car D3, in the
     name of consistency among R-Car Gen3 SoCs.
 
     However, this decision keeps on being questioned when adding new SoC
     support.  Hence bite the bullet and admit our mistake, and rename the
     pin group from "mdc" to "mdio", like on R-Car Gen2 SoCs."
 
 * Ebisu board with R-Car E3 (r8a77990) SoC
   - Initial support: Memory, Main crystal, Serial console
 
   - Enable Ethernet
 
   - Revise PSCI node
 
     Yoshihiro Shimoda says "The basic support patch 2d2dbadba421 ("arm64:
     dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible
     "arm,psci-1.0" in the psci node."
 
   - Revise cache controller node
 
     Yoshihiro Shimoda says "The cache controller node should not have
     unit-addresses and reg properties."
 
 * V3HSK board with R-Car V3H (r8a77980) SoC
   - Initial board device tree
 
     Sergei Shtylov says "Add the initial device  tree for  the V3H Starter
     Kit board.  The board has 1 debug serial port (SCIF0); include support
     for it, so that the serial console can work."
 
   - Enable PFC support and use for EtherAVB
 
 * V3MSK board with R-Car V3M (r8a77970) SoC
   - Add DU/LVDS/HDMI support
 
     Sergei Shtylyov says "Define the V3M Starter Kit board dependent part
     of the DU and LVDS device nodes. Also add the device nodes for Thine
     THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI
     transmitter..."
 
   - Enable PFC for EtherAVB
 
 * Condor board with R-Car V3H (r8a77980) SoC
   - Enable eMMC
 
     Sergei Shtylyov says "We're adding the R8A77980 MMC (SDHI)
     device nodes and then enable eMMC support on the Condor board."
 
   - Enable PFC support and use for EtherAVB and SCIF0
 
 * Eagle board with R-Car V3M (r8a77970) SoC
   - Enable HDMI output
 
 * Eagle board with R-Car V3M (r8a77970) SoC and
   Condor board with R-Car V3H (r8a77980) SoC
   - Enable CAN-FD
 
     Adds the CAN-FD device nodes so the DT SoC files and enables
     single channel CAN-FD support in DT board files.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlr+pZkACgkQ189kaWo3
 T77FOhAAs+F25gyyQZ13/JE38Q+ku2gSrpJLwJJYjztez1EA9Jh15k7xlgU2uEaa
 +YtOodVHqL85LeHp8FMyahOmG6bh+pvqXjAc47ZVDootNm+518gdPvhZ0nWbWuYu
 SKskMN+W5pxkbDNUfIij3TCApAWEAQH4ExJxAMjTJc9ddTPmYKvOyWZTyQvm3qQA
 XsH0uOeDCmasRiJ9rUf6nPBCS4vn7U5w8cbRYQkDymrUmpEO8f+K6nMj+2yTvJJ/
 G0sA8R7Q/9ULRGs4XGadIcQ71xmwpBr13FKMC9xtlhI1NI6HIGo2RkHBRwD4mGay
 PgBhAQR4oekdyEoVwKu3KlTa3Fpohu/NbiwJMTu1QCgAtdd4MCv1RXq3QZIZtTQn
 V3FNVwaH2u4DaX814C2Dmj11zkcehc02uURzRU/pk5UmnIJ4utghu2RmpwO7YQX7
 LqBrzRFHd+Qt03Thp/fwbsdWPYvgrRDSL5v9VV/87RD0zJ9yQR/mjr4OyI5DT6g5
 bEcj535n9X3FY2SFjFWKl4BjuwOcTtiY15oFKdnFcBF2wobaiKO68YgvaYgFpHMD
 T5e+bOgq2IPKW8Z6qMboyj2z9a3oHa6xkEJMEJGKxotViQQC7JUHu3/7cknUelSs
 LP1cJy7IP/62Qb9lvUqJ70Py+L430cuHw6+/Ssf98sRaTx0VD2I=
 =4IoI
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

Renesas ARM64 Based SoC DT Updates for v4.18

* Cleanups:
  - Correct whitespace
  - sort subnodes of the root and soc nodes
* R-Car M3-N (r8a77965) SoC
  - Describe MSIOF SPI, PWM, SDHI and I2C devices in DT
  - Add thermal support
* R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs
  - Decrease temperature hysteresis
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
  - Add address properties to rcar_sound port nodes
* R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs
  - Enable IPMMU devices
* R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs
  - Use sysc binding macros
  - Describe USB2 and USB3 devices in DT
* R-Car V3M (r8a77970) SoC
  - Add SMP Support
  - Correct IPMMU DS1 bit number
* R-Car V3H (r8a77980) SoC
  - Use CPG clock binding macros
* R-Car V3H (r8a77980) and V3M (r8a77970) SoCs
  - Disable EtherAVB
* R-Car D3 (r8a77995) SoC
  - Describe VIN4 in DT

* Ebisu board with R-Car E3 (r8a77990) SoC
  - Initial support
* Salvator-XS boards with R-Car H3 (r8a7795) SoC
  - Enable USB2.0 channel 3
* Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC
  - Enable DU
* Salvator-X and Salvator-XS boards with
  R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
  - Enable nable VIN, CSI-2 and ADV7482
  - Add PMIC DDR Backup Power config
  - Add EEPROM
  - Enable HDMI Sound
* Salvator-X and Salvator-XS boards with
  R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and
  Draak board with R-Car D3 (r8a77995) SoC
  - Consistently name EtherAVB mdio pin group
* Ebisu board with R-Car E3 (r8a77990) SoC
  - Initial support: Memory, Main crystal, Serial console
  - Enable Ethernet
  - Revise PSCI node
  - Revise cache controller node
* V3HSK board with R-Car V3H (r8a77980) SoC
  - Initial board device tree
  - Enable PFC support and use for EtherAVB
* V3MSK board with R-Car V3M (r8a77970) SoC
  - Add DU/LVDS/HDMI support
  - Enable PFC for EtherAVB
* Condor board with R-Car V3H (r8a77980) SoC
  - Enable eMMC
  - Enable PFC support and use for EtherAVB and SCIF0
* Eagle board with R-Car V3M (r8a77970) SoC
  - Enable HDMI output
* Eagle board with R-Car V3M (r8a77970) SoC and
  Condor board with R-Car V3H (r8a77980) SoC
  - Enable CAN-FD

* tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits)
  arm64: dts: renesas: salvator-common: Add ADV7482 support
  arm64: dts: renesas: salvator-common: enable VIN
  arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a7795-es1: add CSI-2 node
  arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
  arm64: dts: renesas: r8a77965: add I2C support
  arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
  arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
  arm64: dts: renesas: r8a77990: Add GPIO device nodes
  arm64: dts: renesas: r8a77990: Add PFC device node
  arm64: dts: renesas: initial V3HSK board device tree
  arm64: dts: renesas: r8a77980: disable EtherAVB
  arm64: dts: renesas: r8a77970: disable EtherAVB
  arm64: dts: renesas: r8a77995: Add VIN4
  arm64: dts: renesas: r8a77980: add resets property to CAN-FD node
  arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
  arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
  arm64: dts: renesas: r8a77965: Add SDHI device nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-02 01:30:07 -07:00
Marc Orr
d1e5b0e98e kvm: Make VM ioctl do valloc for some archs
The kvm struct has been bloating. For example, it's tens of kilo-bytes
for x86, which turns out to be a large amount of memory to allocate
contiguously via kzalloc. Thus, this patch does the following:
1. Uses architecture-specific routines to allocate the kvm struct via
   vzalloc for x86.
2. Switches arm to __KVM_HAVE_ARCH_VM_ALLOC so that it can use vzalloc
   when has_vhe() is true.

Other architectures continue to default to kalloc, as they have a
dependency on kalloc or have a small-enough struct kvm.

Signed-off-by: Marc Orr <marcorr@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 19:18:26 +02:00
Paolo Bonzini
5eec43a1fa KVM/ARM updates for 4.18
- Lazy context-switching of FPSIMD registers on arm64
 - Allow virtual redistributors to be part of two or more MMIO ranges
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAlsRY14VHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDMGwP/A3FDrzGSjgC65m037/dsQj/Eniv
 NkpueEVO3Z8UN44j0TNdeUzj6vQD376GVDwnW3mFlQ416A4ZwwHkk8cQhbpP2UvQ
 EqKKUgujvLueZeuAwYG/DtrR9VZ6fh7QLD7Mv8DW/0AaNdBN2LyHEkW0qx7cSXqu
 PijTsImj9B8TSykYc0SlJz7Q7Y5QUOYbWrJqqa1cskOdmpN2ATInnA2haXeO7j8v
 lkb+WZ9R6xiJSzMCeLEzFV6tUvTiaSw5lVL64jpJhbkBNWPIVAza0erm9TSlQaTw
 d3uJlAy0W9UkXSSqvbmtXvBFqCyEOzZ0hwi2MF6RoVuFt1yXwLgHGps6OUkho4Kq
 pXWImaRHwxyQGrOY0qm0cxr+6TjYnjn8rIOzmzBOrKKq+aCIQ+Sl+CtNYzczQYeE
 rOFBQFsMlzSRJWyabUjhBGFNfDmZZaVFKnUekEqXXETtLxzLZtx+W9i4tzoA1stv
 y0+4yAjEyOQoRsAAE3GmzpDsu7Eu2sae6+lTo7DX1y+A7Wi94HKmy47sVjrS+evV
 2SLyVZ4mhwMzaQ7ngrjHLD1GXDlBxxk2X+NSmBVe5z4AsuWeoqy81f0rgjyCQNxo
 swEqs0k7mMDo8GQNjawwzhdDuHYm4gTX5iGs/Nxx6K4OoJ0bgv83yb/goArp+LEU
 /QWT4T37A/pEEECe
 =DUmC
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM updates for 4.18

- Lazy context-switching of FPSIMD registers on arm64
- Allow virtual redistributors to be part of two or more MMIO ranges
2018-06-01 19:17:22 +02:00
Dave Martin
94b07c1f8c arm64: signal: Report signal frame size to userspace via auxv
Stateful CPU architecture extensions may require the signal frame
to grow to a size that exceeds the arch's MINSIGSTKSZ #define.
However, changing this #define is an ABI break.

To allow userspace the option of determining the signal frame size
in a more forwards-compatible way, this patch adds a new auxv entry
tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame
size that the process can observe during its lifetime.

If AT_MINSIGSTKSZ is absent from the aux vector, the caller can
assume that the MINSIGSTKSZ #define is sufficient.  This allows for
a consistent interface with older kernels that do not provide
AT_MINSIGSTKSZ.

The idea is that libc could expose this via sysconf() or some
similar mechanism.

There is deliberately no AT_SIGSTKSZ.  The kernel knows nothing
about userspace's own stack overheads and should not pretend to
know.

For arm64:

The primary motivation for this interface is the Scalable Vector
Extension, which can require at least 4KB or so of extra space
in the signal frame for the largest hardware implementations.

To determine the correct value, a "Christmas tree" mode (via the
add_all argument) is added to setup_sigframe_layout(), to simulate
addition of all possible records to the signal frame at maximum
possible size.

If this procedure goes wrong somehow, resulting in a stupidly large
frame layout and hence failure of sigframe_alloc() to allocate a
record to the frame, then this is indicative of a kernel bug.  In
this case, we WARN() and no attempt is made to populate
AT_MINSIGSTKSZ for userspace.

For arm64 SVE:

The SVE context block in the signal frame needs to be considered
too when computing the maximum possible signal frame size.

Because the size of this block depends on the vector length, this
patch computes the size based not on the thread's current vector
length but instead on the maximum possible vector length: this
determines the maximum size of SVE context block that can be
observed in any signal frame for the lifetime of the process.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-01 15:53:10 +01:00
Dave Martin
87c021a814 arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
Now that the kernel SVE support is reasonably mature, it is
excessive to default sve_max_vl to the invalid value -1 and then
sprinkle WARN_ON()s around the place to make sure it has been
initialised before use.  The cpufeatures code already runs pretty
early, and will ensure sve_max_vl gets initialised.

This patch initialises sve_max_vl to something sane that will be
supported by every SVE implementation, and removes most of the
sanity checks.

The checks in find_supported_vector_length() are retained for now.
If anything goes horribly wrong, we are likely to trip a check here
sooner or later.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-01 15:53:07 +01:00
Luc Van Oostenryck
1f2f01b122 kbuild: add machine size to CHECKFLAGS
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.

This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.

Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-01 11:36:58 +09:00
Catalin Marinas
cb877710e5 Merge branch 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux
- perf/arm-cci: allow building as module

- perf/arm-ccn: demote dev_warn() to dev_dbg() in event_init()

- miscellaneous perf/arm cleanups

* 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
  ARM: mcpm, perf/arm-cci: export mcpm_is_available
  drivers/bus: arm-cci: fix build warnings
  drivers/perf: Remove ARM_SPE_PMU explicit PERF_EVENTS dependency
  drivers/perf: arm-ccn: don't log to dmesg in event_init
  perf/arm-cci: Allow building as a module
  perf/arm-cci: Remove pointless PMU disabling
  perf/arm-cc*: Fix MODULE_LICENSE() tags
  arm_pmu: simplify arm_pmu::handle_irq
  perf/arm-cci: Remove unnecessary period adjustment
  perf: simplify getting .drvdata
2018-05-31 18:09:38 +01:00
Marc Zyngier
5d81f7dc9b arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
Now that all our infrastructure is in place, let's expose the
availability of ARCH_WORKAROUND_2 to guests. We take this opportunity
to tidy up a couple of SMCCC constants.

Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 18:00:59 +01:00
Marc Zyngier
b4f18c063a arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
In order to forward the guest's ARCH_WORKAROUND_2 calls to EL3,
add a small(-ish) sequence to handle it at EL2. Special care must
be taken to track the state of the guest itself by updating the
workaround flags. We also rely on patching to enable calls into
the firmware.

Note that since we need to execute branches, this always executes
after the Spectre-v2 mitigation has been applied.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 18:00:57 +01:00
Marc Zyngier
55e3748e89 arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
In order to offer ARCH_WORKAROUND_2 support to guests, we need
a bit of infrastructure.

Let's add a flag indicating whether or not the guest uses
SSBD mitigation. Depending on the state of this flag, allow
KVM to disable ARCH_WORKAROUND_2 before entering the guest,
and enable it when exiting it.

Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 18:00:55 +01:00
Marc Zyngier
85478bab40 arm64: KVM: Add HYP per-cpu accessors
As we're going to require to access per-cpu variables at EL2,
let's craft the minimum set of accessors required to implement
reading a per-cpu variable, relying on tpidr_el2 to contain the
per-cpu offset.

Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 18:00:53 +01:00
Marc Zyngier
9cdc0108ba arm64: ssbd: Add prctl interface for per-thread mitigation
If running on a system that performs dynamic SSBD mitigation, allow
userspace to request the mitigation for itself. This is implemented
as a prctl call, allowing the mitigation to be enabled or disabled at
will for this particular thread.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 18:00:52 +01:00
Marc Zyngier
9dd9614f54 arm64: ssbd: Introduce thread flag to control userspace mitigation
In order to allow userspace to be mitigated on demand, let's
introduce a new thread flag that prevents the mitigation from
being turned off when exiting to userspace, and doesn't turn
it on on entry into the kernel (with the assumption that the
mitigation is always enabled in the kernel itself).

This will be used by a prctl interface introduced in a later
patch.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 17:35:32 +01:00
Marc Zyngier
647d0519b5 arm64: ssbd: Restore mitigation status on CPU resume
On a system where firmware can dynamically change the state of the
mitigation, the CPU will always come up with the mitigation enabled,
including when coming back from suspend.

If the user has requested "no mitigation" via a command line option,
let's enforce it by calling into the firmware again to disable it.

Similarily, for a resume from hibernate, the mitigation could have
been disabled by the boot kernel. Let's ensure that it is set
back on in that case.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 17:35:19 +01:00
Marc Zyngier
986372c436 arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
In order to avoid checking arm64_ssbd_callback_required on each
kernel entry/exit even if no mitigation is required, let's
add yet another alternative that by default jumps over the mitigation,
and that gets nop'ed out if we're doing dynamic mitigation.

Think of it as a poor man's static key...

Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-31 17:35:06 +01:00