Paving the way to move more stuff out of TUI and into the generic
annotation library.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8vqax6wgfqohelot8j8zsfvs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the TUI code, as it has nothing specific to that UI and should be
used in the other output modes as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0jahghvqdodb8vu2591pkv3d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is needed to reduce the differences between the TUI mode and the
other annotation UIs, next csets will move that code to the UI-neutral
annotation library. Leaving it in place for now to ease review.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-gz09ahsd5xm1eip7ura5ow6x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to pave the way to have more functions shared between TUI, stdio
and the upcoming stdio2 formatting, that will use the __scnprintf
functions used by --tui in a --stdio fashion.
This partially addresses the comments added in cset 30e863bb6f ("perf
annotate: Compute IPC and basic block cycles"):
/*
* This should probably be in util/annotate.c to share with the tty
* annotate, but right now we need the per byte offsets arrays,
* which are only here.
*/
The following patches will address the rest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yftvybgx1s8sevs6kp1an0ft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of an open coded equivalent, will reduce a bit noise in
the following patches.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-pnwn1dg9345zawhgiorpsadf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These will be used in --stdio2 so lets move it first to reduce noise in
the following patches.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fisud7pcak3prk7uwsvs3g2e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will be useful when making parts of the TUI browser generic enough
to be used for a new stdio mode, available even when the TUI is not
built in, for explicit user decision or when the necessary library devel
files, for the slang library currently, are not available in the build
system.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-45twzienhz7ypbad0sbvojku@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In verbose level 2, errors returned by libdw are reported in most cases,
but not when calling dwfl_attach_state.
Since elfutils v 0.160 (2014), dwfl_attach_state sets the error code to
report failure cause. On failure, log the reported error.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180318175053.4222-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users of the custom firmware fallback interface is are not supposed to
use the firmware cache interface, this can happen if for instance the
one of the APIs which use the firmware cache is used first with one
firmware file and then the request_firmware_nowait(uevent=false) API
is used with the same file.
We'll soon become strict about this on the firmware interface to reject
such calls later, so correct the test scripts to avoid such uses as well.
We address this on the tests scripts by simply using unique names when
testing the custom fallback interface.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we now have knobs to twiddle what used to be set on kernel
configurations we can build one base kernel configuration and modify
behaviour to mimic such kernel configurations to test them.
Provided you build a kernel with:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
We should now be able test all possible kernel configurations
when FW_LOADER=y. Note that when FW_LOADER=m we just don't provide
the built-in functionality of the built-in firmware.
If you're on an old kernel and either don't have /proc/config.gz
(CONFIG_IKCONFIG_PROC) or haven't enabled CONFIG_FW_LOADER_USER_HELPER
we cannot run these dynamic tests, so just run both scripts just
as we used to before making blunt assumptions about your setup
and requirements exactly as we did before.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This expands our library with as many things we could find which
both scripts we use share.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds an option to test the msg_pull_data helper. This
uses two options txmsg_start and txmsg_end to let the user
specify start and end bytes to pull.
The options can be used with txmsg_apply, txmsg_cork options
as well as with any of the basic tests, txmsg, txmsg_redir and
txmsg_drop (plus noisy variants) to run pull_data inline with
those tests. By giving user direct control over the variables
we can easily do negative testing as well as positive tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sample application support for the bpf_msg_cork_bytes helper. This
lets the user specify how many bytes each verdict should apply to.
Similar to apply_bytes() tests these can be run as a stand-alone test
when used without other options or inline with other tests by using
the txmsg_cork option along with any of the basic tests txmsg,
txmsg_redir, txmsg_drop.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds an option to test the apply_bytes helper. This option lets
the user specify an int on the command line specifying how much data
each verdict should apply to.
When this is set a map entry is set with the bytes input by the user
and then the specified program --txmsg or --txmsg_redir will use the
value and set the applied data. If no other option is set then a
default --txmsg_apply program is run. This program will drop pkts
if an error is detected on the bytes map lookup. Useful to verify
the map lookup and apply helper are working and causing a hard
error if it is not.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add sockmap option to use SK_MSG program types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Test read and writes for BPF_PROG_TYPE_SK_MSG.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add map tests to attach BPF_PROG_TYPE_SK_MSG types to a sockmap.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Fixes for problems experienced with new gcc 8 warnings, that treated
as errors, broke the build, related to snprintf and casting issues.
(Arnaldo Carvalho de Melo, Jiri Olsa, Josh Poinboeuf)
- Fix build of new breakpoint 'perf test' entry with clang < 6, noticed
on fedora 25, 26 and 27 (Arnaldo Carvalho de Melo)
- Workaround problem with symbol resolution in 'perf annotate', using
the symbol name already present in the objdump output (Arnaldo Carvalho de Melo)
- Document 'perf top --ignore-vmlinux' (Arnaldo Carvalho de Melo)
- Fix out of bounds access on array fd when cnt is 100 in one of the
'perf test' entries, detected using 'cpptest' (Colin Ian King)
- Add support for the forced leader feature, i.e. 'perf report --group'
for a group of events not really grouped when scheduled (without using
{} to enclose the list of events in the command line) in pipe mode,
e.g.:
$ perf record -e cycles,instructions -o - kill | perf report --group -i -
- Use right type to access array elements in 'perf probe' (Masami Hiramatsu)
- Update POWER9 vendor events (those described in JSON format) (Sukadev Bhattiprolu)
- Discard head in overwrite_rb_find_range() (Yisheng Xie)
- Avoid setting 'quiet' to 'true' unnecessarily (Yisheng Xie)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlqwAhcACgkQ1lAW81NS
qkAEbQ/7BYDGdMPTPRlx593wgxEztdxeUY4xxnnMACBhnCe9IaCT/fdJ4p1AUDqI
62T+GR1APY8h1S2cAVX9tG5X+BLpXJXMFUpQor6WuzEIZiBuM7cRoVB9x2aezYrG
21skVZOELEGG8n45DT/S0eFNT6eWCcVLyo3nyAMN/+ia2JdOyGKUgcUKrR0HKyy3
20ux5hSF5lfIfoSSI3vQuDU1xIFW6s6q6sFS0hJ2BuwhZYR/F0PgvFG+G9+nDH/6
wyOh6bJJTBpUxfmacfw1eev0UXnkifU+CRheQtFRksR/hXl7dNaaiIH/7dw1dckS
O+hRBEnPS86q02Uc/M+3dcHnsbvcUwwOF8Y7yyFgJUyMrf+av8dOtBc1aguKqg5I
hlF+hMeNA8K9IGd5xQ+UfposvAEADNpwYSIr+NtLPVi2c6hR0GefmVPlus7ZuitA
n9LDfwaKMt+edCyIbe+kgWNjCzAXT5PQI672QA+9uWGkeYat9ihXvZXSoF7jzrxn
dTPvGaeqQP4qF0zF3Gwn+HJ8FxAASV9HeGIVQEU38nyf6fTh0lzNvjEhb8NTNBd7
aDvfgp/x2j0WVFU5ku4iAoTXYGoXNCneRbSCCQ6rG9NJOdj+FZFXV/MA2vy0UiS2
7Rc485exwbd9yJyt+G1jgK2/rRUWHn7kL3yoMoZSxCfj2ASX504=
=5m0f
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180319' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Fixes for problems experienced with new GCC 8 warnings, that treated
as errors, broke the build, related to snprintf and casting issues.
(Arnaldo Carvalho de Melo, Jiri Olsa, Josh Poinboeuf)
- Fix build of new breakpoint 'perf test' entry with clang < 6, noticed
on fedora 25, 26 and 27 (Arnaldo Carvalho de Melo)
- Workaround problem with symbol resolution in 'perf annotate', using
the symbol name already present in the objdump output (Arnaldo Carvalho de Melo)
- Document 'perf top --ignore-vmlinux' (Arnaldo Carvalho de Melo)
- Fix out of bounds access on array fd when cnt is 100 in one of the
'perf test' entries, detected using 'cpptest' (Colin Ian King)
- Add support for the forced leader feature, i.e. 'perf report --group'
for a group of events not really grouped when scheduled (without using
{} to enclose the list of events in the command line) in pipe mode,
e.g.:
$ perf record -e cycles,instructions -o - kill | perf report --group -i -
- Use right type to access array elements in 'perf probe' (Masami Hiramatsu)
- Update POWER9 vendor events (those described in JSON format) (Sukadev Bhattiprolu)
- Discard head in overwrite_rb_find_range() (Yisheng Xie)
- Avoid setting 'quiet' to 'true' unnecessarily (Yisheng Xie)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Starting with recent GCC 8 builds, objtool and perf fail to build with
the following error:
../str_error_r.c: In function ‘str_error_r’:
../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict]
snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err);
The code seems harmless, but there's probably no benefit in printing the
'buf' pointer in this situation anyway, so just remove it to make GCC
happy.
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current 'perf probe' converts the type of array-elements incorrectly. It
always converts the types as a pointer of array. This passes the "array"
type DIE to the type converter so that it can get correct "element of
array" type DIE from it.
E.g.
====
$ cat hello.c
#include <stdio.h>
void foo(int a[])
{
printf("%d\n", a[1]);
}
void main()
{
int a[3] = {4, 5, 6};
printf("%d\n", a[0]);
foo(a);
}
$ gcc -g hello.c -o hello
$ perf probe -x ./hello -D "foo a[1]"
====
Without this fix, above outputs
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):u64
====
The "u64" means "int *", but a[1] is "int".
With this,
====
p:probe_hello/foo /tmp/hello:0x4d3 a=+4(-8(%bp)):s32
====
So, "int" correctly converted to "s32"
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-trace-users@vger.kernel.org
Fixes: b2a3c12b74 ("perf probe: Support tracing an entry of array")
Link: http://lkml.kernel.org/r/152129114502.31874.2474068470011496356.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a bug where when using 'perf annotate timerqueue_add' the
target for its only routine called with the 'callq' instruction,
'rb_insert_color', doesn't get resolved from its address when parsing
that 'callq' instruction.
That symbol resolution works when using 'perf report --tui' and then
doing annotation for 'timerqueue_add' from there, the vmlinux
dso->symbols rb_tree somehow gets in a state that we can't find that
address, that is a bug that has to be further investigated.
But since the objdump output has the function name, i.e. the raw objdump
disassembled line looks like:
So, before:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq *ffffffff8184dc80
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
# perf report
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
And after both look the same:
# perf annotate timerqueue_add
│ mov %rbx,%rdi
│ mov %rbx,(%rdx)
│ → callq rb_insert_color
│ mov 0x8(%rbp),%rdx
│ test %rdx,%rdx
│ ↓ je 67
From 'perf report' one can annotate and navigate to that 'rb_insert_color'
function, but not directly from 'perf annotate timerqueue_add', that
remains to be investigated and fixed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nkktz6355rhqtq7o8atr8f8r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've had this since 2013, document it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Willy Tarreau <w@1wt.eu>
Fixes: fc2be6968e ("perf symbols: Add new option --ignore-vmlinux for perf top")
Link: https://lkml.kernel.org/n/tip-0jwfueooddwfsw9r603belxi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The gcc 8 compiler won't compile the python extension code with the
following errors (one example):
python.c:830:15: error: cast between incompatible function types from \
‘PyObject * (*)(struct pyrf_evsel *, PyObject *, PyObject *)’ \
uct _object * (*)(struct pyrf_evsel *, struct _object *, struct _object *)’} to \
‘PyObject * (*)(PyObject *, PyObject *)’ {aka ‘struct _object * (*)(struct _objeuct \
_object *)’} [-Werror=cast-function-type]
.ml_meth = (PyCFunction)pyrf_evsel__open,
The problem with the PyMethodDef::ml_meth callback is that its type is
determined based on the PyMethodDef::ml_flags value, which we set as
METH_VARARGS | METH_KEYWORDS.
That indicates that the callback is expecting an extra PyObject* arg, and is
actually PyCFunctionWithKeywords type, but the base PyMethodDef::ml_meth type
stays PyCFunction.
Previous gccs did not find this, gcc8 now does. Fixing this by silencing this
warning for python.c build.
Commiter notes:
Do not do that for CC=clang, as it breaks the build in some clang
versions, like the ones in fedora up to fedora27:
fedora:25:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:26:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
fedora:27:error: unknown warning option '-Wno-cast-function-type'; did you mean '-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
#
those have:
clang version 3.9.1 (tags/RELEASE_391/final)
The one in rawhide accepts that:
clang version 6.0.0 (tags/RELEASE_600/final)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall. Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test. Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: 1fad59ea1c ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86/pti updates from Thomas Gleixner:
"Another set of melted spectrum updates:
- Iron out the last late microcode loading issues by actually
checking whether new microcode is present and preventing the CPU
synchronization to run into a timeout induced hang.
- Remove Skylake C2 from the microcode blacklist according to the
latest Intel documentation
- Fix the VM86 POPF emulation which traps if VIP is set, but VIF is
not. Enhance the selftests to catch that kind of issue
- Annotate indirect calls/jumps for objtool on 32bit. This is not a
functional issue, but for consistency sake its the right thing to
do.
- Fix a jump label build warning observed on SPARC64 which uses 32bit
storage for the code location which is casted to 64 bit pointer w/o
extending it to 64bit first.
- Add two new cpufeature bits. Not really an urgent issue, but
provides them for both x86 and x86/kvm work. No impact on the
current kernel"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Fix CPU synchronization routine
x86/microcode: Attempt late loading only when new microcode is present
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
jump_label: Fix sparc64 warning
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/vm86/32: Fix POPF emulation
selftests/x86/entry_from_vm86: Add test cases for POPF
selftests/x86/entry_from_vm86: Exit with 1 if we fail
x86/cpufeatures: Add Intel PCONFIG cpufeature
x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqlyPEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNa0H/RIa/StQuYu/SBwa
JRqQFmkIsx+gG+FyamJrqGzRfyjounES8PbfyaN3cCrzYgeRwMp1U/bZW6/l5tkb
OjTtrCJ6CJaa21fC/7aqn3rhejHciKyk83EinMu5WjDpsQcaF2xKr3SaPa62Ja24
fhawKq3CnUa+OUuAbicVX8yn4viUB6x8FjSN/IWfp3Cs4IBR7SGxxD7A4MET9FbQ
5OOu0al8ly9QeCggTtJyk+cApeLfexEBTbUur9gm7GcH9jhUtJSyZCZsDJx6M2yb
CwdgF4fyk58c1fuHvTFb0AdUns55ba3nicybRHHMVbDpZIG9v4/M1yJETHHf5cD7
t3rFjrY=
=+Ldf
-----END PGP SIGNATURE-----
Merge tag 'v4.16-rc5' into devel
Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This test checks that MTU configured from userspace is used on
link creation and changes, and that when it's not passed from
userspace, it's calculated properly from the MTU of the lower
layer.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_link_add_mtu test, but for IPv6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that MTU given on vti link creation is actually
configured, and that tunnel is not created with an invalid MTU
value.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that PMTU exceptions are created only when
needed on IPv4 routes with vti and xfrm, and their PMTU value is
checked as well.
We can't adopt the same approach as test_pmtu_vti6_exception()
here, because on IPv4 administrative MTU changes won't be
reflected directly on PMTU.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce list of tests and their descriptions, and loop on it
in main body.
Tests will now just take care of calling setup with a list of
"units" they need, and return 0 on success, 1 on failure, 2 if
the test had to be skipped.
Main script body will take care of displaying results and
cleaning up after every test. Introduce guard variable so that
we don't clean up twice in case of interrupts or unexpected
failures.
The pmtu_vti6_exception test can now run its third step even if
the previous one failed, as we can return values from it.
Also introduce support to display test descriptions, and display
aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that
in case of failure we can display them right under the outcome
for each test.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
...so that it can be used for any iproute command output.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I
accidentally assumed route_get_* helpers would run from a single
namespace. Make them a bit more generic, by passing the
namespace command prefix as a parameter instead.
Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David suggests it's more intuitive to return non-zero on
failures, and zero on success.
No need to introduce tail 'return 0' in functions, they will
return the exit code of the last command anyway.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allowing a guest to execute MWAIT without interception enables a guest
to put a (physical) CPU into a power saving state, where it takes
longer to return from than what may be desired by the host.
Don't give a guest that power over a host by default. (Especially,
since nothing prevents a guest from using MWAIT even when it is not
advertised via CPUID.)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using --quiet to disable messages, we will set the 'quiet' variable
to 'true' first, then check that variable to decide whether we need to
call perf_quiet_option(), so no need to set 'quiet' to 'true' once more
in perf_quiet_option().
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520944274-37001-2-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In overwrite mode, start will be set to head in perf_mmap__read_init().
Therefore, there is no need to set the start one more time in
overwrite_rb_find_range() and *start can be used as head instead of
passing head to overwrite_rb_find_range().
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520944274-37001-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a way to configure if poll() should wait forever for an event, the
number of packets that should be sent for each and if there should be
any delay between packets.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephane reported a problem with forced leader in pipe mode, where
report does not force the group output. The reason is that we don't
force the leader in pipe mode.
This patch adds HEADER_LAST_FEATURE mark to have a point where we have
all events and features received, and force the group if requested.
$ perf record --group -e '{cycles, instructions}' -o - kill | perf report -i - --group
SNIP
# Overhead Command Shared Object Symbol
# ................ ....... ................ .......................
#
28.36% 0.00% kill libc-2.25.so [.] __unregister_atfork
26.32% 0.00% kill libc-2.25.so [.] _dl_addr
26.10% 0.00% kill ld-2.25.so [.] _dl_relocate_object
17.32% 0.00% kill ld-2.25.so [.] __tunables_init
1.70% 0.01% kill [unknown] [k] 0xffffffffafa01a40
0.20% 0.00% kill ld-2.25.so [.] _start
0.00% 48.77% kill ld-2.25.so [.] do_lookup_x
0.00% 42.97% kill libc-2.25.so [.] _IO_getline
0.00% 6.35% kill ld-2.25.so [.] strcmp
0.00% 1.71% kill ld-2.25.so [.] _dl_sysdep_start
0.00% 0.19% kill ld-2.25.so [.] _dl_start
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180314092205.23291-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to synthesize events first, because some features works on top
of them (on report side).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180314092205.23291-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently when cnt is 100 an array bounds overflow occurs on the
assignment of fd[cnt]. Fix this by performing the bounds check on cnt
before writing to fd.
Detected by cppcheck:
tools/perf/tests/bp_account.c:115: (warning) Either the condition
'cnt==100' is redundant or the array 'fd[100]' is accessed at index 100,
which is out of bounds.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: 032db28e5f ("perf tests: Add breakpoint accounting/modify test")
Link: http://lkml.kernel.org/r/20180314173354.11250-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:
util/annotate.c: In function 'symbol__disassemble':
util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
"%s %s%s --start-address=0x%016" PRIx64
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/annotate.c:1498:20:
symfs_filename, symfs_filename);
~~~~~~~~~~~~~~
util/annotate.c:1490:50: note: format string is defined here
" -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
^~
In file included from /usr/include/stdio.h:861,
from util/color.h:5,
from util/sort.h:8,
from util/annotate.c:14:
/usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So switch to asprintf, that will make sure enough space is available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This fixes record+probe_libc_inet_pton.sh from always exiting with code
0 and making the test pass even if the perf script output does not match
the expected pattern.
The issue can be observed if this test is run with the verbose flags as
shown below:
60: probe libc's inet_pton & backtrace it with ping :
...
ping 19602 [006] 16988.413767: probe_libc:inet_pton: (7fff9a2c42e8)
1842e8 __GI___inet_pton (/usr/lib64/libc-2.26.so)
130db4 getaddrinfo (/usr/lib64/libc-2.26.so)
FAIL: expected backtrace entry 3 ".*\(.*/bin/ping.*\)$" got ""
test child finished with 0
...
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Fixes: e07d585e2454 ("perf tests: Switch trace+probe_libc_inet_pton to use record")
Link: http://lkml.kernel.org/r/20180312124450.30371-1-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo reported broken -k option behavior. The reason is that we used
symbol_conf.vmlinux_name as a source for mmap event name, but in fact
it's a vmlinux path.
Moving the symbol_conf.vmlinux_name check for both host and guest to the
proper place and out of the machine__set_mmap_name function.
Reported-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: commit ("8c7f1bb37b29 perf machine: Move kernel mmap name into struct machine")
Link: http://lkml.kernel.org/r/20180312152406.10141-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function perf_stat_evsel_id_init() has global linkage but is only used
in util/stat.c. Make it static.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180312103807.45069-2-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to template, display also the real compile command line with
all the variables substituted.
llvm compiling command template: $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS ...
llvm compiling command : /usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=24 -DLINUX_VERSION_CODE=0x41000 ...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180312094313.18738-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When trying to add the "call-graph" variable for top into the
.perfconfig file, like:
[top]
call-graph = fp
I that perf_top_config() do not parse this variable.
Fix it by calling perf_default_config() when the top.call-graph variable
is set.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b8cbb34906 ("perf config: Bring perf_default_config to the very beginning at main()")
Link: http://lkml.kernel.org/r/1520853957-36106-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have brought perf_default_config to the very beginning at main(), so
it no need to call perf_default_config() once more for most of config in
perf-record but only for record.call-graph.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520853957-36106-2-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Path passed to libdw for unwinding doesn't include symfs path
if specified, so unwinding fails because ELF file is not found.
Similar to unwinding with libunwind, pass symsrc_filename instead
of long_name. If there is no symsrc_filename, fallback to long_name.
Signed-off-by: Martin Vuille <jpmv27@aim.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is MIDR change on ThunderX2 B0, adding an entry to mapfile to
enable JSON events for B0.
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gklkml16.com>
Cc: Jayachandran C <jnair@caviumnetworks.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@cavium.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20180307110803.32418-1-ganapatrao.kulkarni@cavium.com
[ Fixup wrt recent patchset by John Garry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When recently using 'perf report --stat' it was not clear to me from the
output whether a particular statistics field (LOST_SAMPLES) was not
present, or just zero:
fomalhaut:~> perf report --stat
Aggregated stats:
TOTAL events: 495984
MMAP events: 85
COMM events: 3389
EXIT events: 1605
THROTTLE events: 2
UNTHROTTLE events: 2
FORK events: 3377
SAMPLE events: 472629
MMAP2 events: 14753
FINISHED_ROUND events: 139
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
I had to check the output several times to ascertain that I'm not
misreading the output, that the field didn't change and that I didn't
misremember the name. In fact I had to look into the perf source to make
sure that zero fields are indeed not shown.
With the patch applied:
fomalhaut:~> perf report --stat
Aggregated stats:
TOTAL events: 495984
MMAP events: 85
LOST events: 0
COMM events: 3389
EXIT events: 1605
THROTTLE events: 2
UNTHROTTLE events: 2
FORK events: 3377
READ events: 0
SAMPLE events: 472629
MMAP2 events: 14753
AUX events: 0
ITRACE_START events: 0
LOST_SAMPLES events: 0
SWITCH events: 0
SWITCH_CPU_WIDE events: 0
NAMESPACES events: 0
ATTR events: 0
EVENT_TYPE events: 0
TRACING_DATA events: 0
BUILD_ID events: 0
FINISHED_ROUND events: 139
ID_INDEX events: 0
AUXTRACE_INFO events: 0
AUXTRACE events: 0
AUXTRACE_ERROR events: 0
THREAD_MAP events: 1
CPU_MAP events: 1
STAT_CONFIG events: 0
STAT events: 0
STAT_ROUND events: 0
EVENT_UPDATE events: 0
TIME_CONV events: 1
FEATURE events: 0
It's pretty clear at a glance that LOST_SAMPLES is present but zero.
The original output can still be gotten via:
fomalhaut:~> perf report --stat | grep -vw 0
Aggregated stats:
TOTAL events: 495984
MMAP events: 85
COMM events: 3389
EXIT events: 1605
THROTTLE events: 2
UNTHROTTLE events: 2
FORK events: 3377
SAMPLE events: 472629
MMAP2 events: 14753
FINISHED_ROUND events: 139
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
So I don't think there's any real loss in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180307152430.7e5h7e657b7bgd7q@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Executing command 'perf stat -T -- ls' dumps core on x86 and s390.
Here is the call back chain (done on x86):
# gdb ./perf
....
(gdb) r stat -T -- ls
...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
(gdb) where
#0 0x00007ffff56d1963 in vasprintf () from /lib64/libc.so.6
#1 0x00007ffff56ae484 in asprintf () from /lib64/libc.so.6
#2 0x00000000004f1982 in __parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930, auto_merge_stats=false) at util/parse-events.c:1233
#3 0x00000000004f1c8e in parse_events_add_pmu (parse_state=0x7fffffffd580,
list=0xbfb970, name=0xbf3ef0 "cpu",
head_config=0xbfb930) at util/parse-events.c:1288
#4 0x0000000000537ce3 in parse_events_parse (_parse_state=0x7fffffffd580,
scanner=0xbf4210) at util/parse-events.y:234
#5 0x00000000004f2c7a in parse_events__scanner (str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}",
parse_state=0x7fffffffd580, start_token=258) at util/parse-events.c:1673
#6 0x00000000004f2e23 in parse_events (evlist=0xbe9990, str=0x6b66c0
"task-clock,{instructions,cycles,cpu/cycles-t/,cpu/tx-start/}", err=0x0)
at util/parse-events.c:1713
#7 0x000000000044e137 in add_default_attributes () at builtin-stat.c:2281
#8 0x000000000044f7b5 in cmd_stat (argc=1, argv=0x7fffffffe3b0) at
builtin-stat.c:2828
#9 0x00000000004c8b0f in run_builtin (p=0xab01a0 <commands+288>, argc=4,
argv=0x7fffffffe3b0) at perf.c:297
#10 0x00000000004c8d7c in handle_internal_command (argc=4,
argv=0x7fffffffe3b0) at perf.c:349
#11 0x00000000004c8ece in run_argv (argcp=0x7fffffffe20c,
argv=0x7fffffffe200) at perf.c:393
#12 0x00000000004c929c in main (argc=4, argv=0x7fffffffe3b0) at perf.c:537
(gdb)
It turns out that a NULL pointer is referenced. Here are the
function calls:
...
cmd_stat()
+---> add_default_attributes()
+---> parse_events(evsel_list, transaction_attrs, NULL);
3rd parameter set to NULL
Function parse_events(xx, xx, struct parse_events_error *err) dives
into a bison generated scanner and creates
parser state information for it first:
struct parse_events_state parse_state = {
.list = LIST_HEAD_INIT(parse_state.list),
.idx = evlist->nr_entries,
.error = err, <--- NULL POINTER !!!
.evlist = evlist,
};
Now various functions inside the bison scanner are called to end up in
__parse_events_add_pmu(struct parse_events_state *parse_state, ..) with
first parameter being a pointer to above structure definition.
Now the PMU event name is not found (because being executed in a VM) and
this function tries to create an error message with
asprintf(&parse_state->error.str, ....)
which references a NULL pointer and dumps core.
Fix this by providing a pointer to the necessary error information
instead of NULL. Technically only the else part is needed to avoid the
core dump, just lets be safe...
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308145735.64717-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the ARM Cortex-A53 json to use event definition from
the ARMv8 recommended events.
In addition to this change, other changes were made:
- remove stray ','
- remove mirrored events in memory.json and bus.json
- fixed indentation to be consistent with other ARM
JSONs
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-11-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes the Cavium ThunderX2 JSON to use event definitions from
the ARMv8 recommended events.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-10-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some architectures (like arm), there are architecture- defined
events. Sometimes these events may be "recommended" according to the
architecture standard, in that the implementer is free ignore the
"recommendation" and create its custom event.
This patch adds support for parsing standard events from arch-defined
JSONs, and fixing up vendor events when they have implemented these
events as standard.
Support is also ensured that the vendor may implement their own custom
events.
A new step is added to the pmu events parsing to fix up the vendor
events with the arch-standard events.
The arch-defined JSONs must be placed in the arch root folder for
preprocessing prior to tree JSON processing.
In the vendor JSON, to specify that the arch event is supported, the
keyword "ArchStdEvent" should be used, like this:
[
{
"ArchStdEvent": "L1D_CACHE_WR",
},
]
Matching is based on the "EventName" field in the architecture JSON.
No other JSON objects are strictly required. However, for other objects
added, these take precedence over architecture defined standard events,
thus supporting separate events which have the same event code.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-8-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since jevents now supports vendor subdirectory, relocate the Cortex-A53
JSONs to arm subdirectory.
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some architectures (like arm), it is required to support a vendor
subdirectory and not locate all the JSONs for a specific vendor in the
same folder.
This is because all the events for the same vendor will be placed in the
same pmu events table, which may cause conflict. This conflict would be
in the instance that a vendor's custom implemented events do have the
same meaning on different platforms, so events in the pmu table would
conflict. In addition, per list command may show events which are not
even supported for a given platform.
This patch adds support for a arch/vendor/platform directory hierarchy,
while maintaining backwards-compatibility for existing arch/platform
structure. In this, each platform would always have its own pmu events
table.
In generated file pmu_events.c, each platform table name is in the
format pme{_vendor}_platform, like this:
struct pmu_events_map pmu_events_map[] = {
{
.cpuid = "0x00000000420f5160",
.version = "v1",
.type = "core",
.table = pme_cavium_thunderx2
},
{
.cpuid = 0,
.version = 0,
.type = 0,
.table = 0,
},
};
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-5-git-send-email-john.garry@huawei.com
Link: http://lkml.kernel.org/r/1521047452-28565-1-git-send-email-john.garry@huawei.com
[ Add missing limits.h include, fixing the build on at least all Alpine Linux versions tested (3.4 to 3.7 + edge), ]
[ Applied a patch to fix reading ./.. directories in XFS, see second Link tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently a topic subdirectory is supported in the pmu-events dir, in
the following sample structure: /arch/platform/subtopic/mysubtopic.json
Upto 256 levels of topic subdirectories are supported. So this means
that JSONs may be located in a topic dir as well as the platform dir.
This topic subdirectory causes problems if we want to add support for a
vendor dir in the pmu-events structure (in the form
arch/platform/vendor), in that we cannot differentiate between a vendor
dir and a topic dir.
Since the topic dir feature is not used, drop it so it does not block
adding vendor subdirectory support.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When EXPECT macro fails an assertion, the error code is not properly set
after the first loop of tokens in function json_events().
This is because err is set to the return value from func function
pointer call, which must be 0 to continue to loop, yet it is not reset
for for each loop. I assume that this was not the intention, so change
the code so err is set appropriately in EXPECT macro itself.
In addition to this, the indention in EXPECT macro is tidied. The
current indention alludes that the 2 statements following the if
statement are in the body, which is not true.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently jevents supports multiple mapfiles, but this is only in the
form where mapfile basename starts with 'mapfile.csv'
At the moment, no architectures actually use multiple mapfiles, so drop
the support for now.
This patch also solves a nuisance where, when the mapfile is edited and
the text editor may create a backup, jevents may use the backup, as
shown:
jevents: Many mapfiles? Using pmu-events/arch/arm64/mapfile.csv~, ignoring pmu-events/arch/arm64/mapfile.csv
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lkml.kernel.org/r/1520506716-197429-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on prior work:
https://lkml.org/lkml/2014/5/6/395
and on how other arches add libdw unwind support. Includes support for
running the unwind test, e.g., on a system with only elfutils' libdw
0.170, the test now runs, and successfully:
$ ./perf test unwind
56: Test dwarf unwind : Ok
Originally-by: Jean Pihet <jean.pihet@linaro.org>
Reported-by: Christian Hansen <chansen3@cisco.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180308211030.4ee4a0d6ff6dc5cda1b567d4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the 'PA cnt' column grouped under data cacheline address.
It shows how many times the physical addresses changed for the hist
entry. It does not show the number of different physical addresses for
entry, because we don't store those. We only track the number of times
we got different address than we currently hold, which is not expensive
and gives similar info.
$ perf c2c report --stdio
# ----------- Cacheline ---------- Total Tot ----- LLC Load Hitm -----
# Index Address Node PA cnt records Hitm Total Lcl Rmt
# ..... .................. .... ...... ....... ....... ....... ....... .......
#
0 0xffff9ad56dca0a80 0 9 10 7.69% 2 2 0
1 0xffff9ad56dce0a80 0 9 9 7.69% 2 2 0
2 0xffff9ad37659ad80 0 1 2 3.85% 1 1 0
...
# ----- HITM ----- -- Store Refs -- --------- Data address ---------
# Num Rmt Lcl L1 Hit L1 Miss Offset Node PA cnt Pid
# ..... ....... ....... ....... ....... .................. .... ...... .......
#
-------------------------------------------------------------
0 0 2 3 0 0xffff9ad56dca0a80
-------------------------------------------------------------
0.00% 0.00% 33.33% 0.00% 0x0 0 1 2510
0.00% 0.00% 33.33% 0.00% 0x4 0 1 2476
0.00% 0.00% 33.33% 0.00% 0x20 0 1 0
0.00% 100.00% 0.00% 0.00% 0x38 0 1 0
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding the NUMA node info for the data cacheline. Adding the new column
to both "Shared Data Cache Line Table" and "Shared Cache Line
Distribution Pareto".
Note the new 'Node' column next to the 'Cacheline'.
$ perf c2c report --stdio
=================================================
Shared Data Cache Line Table
=================================================
#
# Total Tot ----- LLC Load Hitm -----
# Index Cacheline Node records Hitm Total Lcl Rmt
# ..... .................. .... ....... ....... ....... ....... .......
#
0 0x7f0830100000 0 84 10.53% 8 8 0
1 0xffff922a93154200 0 3 2.63% 2 2 0
2 0xffff922a93154500 0 4 2.63% 2 2 0
...
Note the new 'Node' column next to the 'Offset'.
=================================================
Shared Cache Line Distribution Pareto
=================================================
#
# ----- HITM ----- -- Store Refs -- Data address
# Num Rmt Lcl L1 Hit L1 Miss Offset Node Pid
# ..... ....... ....... ....... ....... .................. .... .......
#
-------------------------------------------------------------
0 0 8 32 2 0x7f0830100000
-------------------------------------------------------------
0.00% 75.00% 21.88% 0.00% 0x18 0 1791
0.00% 12.50% 37.50% 0.00% 0x18 0 1791
0.00% 0.00% 34.38% 0.00% 0x18 0 1791
Using the mem2node object to get the NUMA node data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to calculate column widths for entries that are not
going to be displayed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to calculate tje column width based on the struct
c2c_hist_entry data, so making calc_width to work with struct
c2c_hist_entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to display NUMA node information in following patches. For
this we need to have physical address data in the sample.
Adding --phys-data as a default option for perf c2c record.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding mem2node object automated test.
The test prepares few artificial nodes - memory maps and verifies the
mem2node object returns proper node values to given addresses.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding mem2node object to allow the easy lookup of the node for the
physical address.
It has following interface:
int mem2node__init(struct mem2node *map, struct perf_env *env);
void mem2node__exit(struct mem2node *map);
int mem2node__node(struct mem2node *map, u64 addr);
The mem2node__toolsinit initialize object from the perf data file
MEM_TOPOLOGY feature data. Following calls to mem2node__node will return
node number for given physical address. The mem2node__exit function
frees the object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Forgot to free env's memory nodes, adding needed code to perf_env__exit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180309101442.9224-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add series of tests for valid and invalid nexthop specs for IPv6.
$ TEST=fib_nexthop_test ./fib_tests.sh
...
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a user to run just a specific fib test by setting the TEST
environment variable.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 'ip -netns testns' with the alias IP. Shortens the line lengths
and makes running the commands manually a bit easier.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.
There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.
Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.
Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
bpf tools use feature detection for libbfd dependency, clean up
the output files on make clean.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There is no FORCE target in the Makefile and some of the PHONY
targets are missing, update the list.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC 7 complains:
xlated_dumper.c: In function ‘print_call’:
xlated_dumper.c:179:10: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 249 and 253 [-Wformat-truncation=]
"%+d#%s", insn->off, sym->name);
Add a bit more space to the buffer so it can handle the entire
string and integer without truncation.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Auto-generated dependency files are in the OUTPUT directory,
we need to include them from there. This fixes object files
not being rebuilt after header changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_stacktrace_build_id() is added. It accesses tracepoint urandom_read
with "dd" and "urandom_read" and gathers stack traces. Then it reads the
stack traces from the stackmap.
urandom_read is a statically link binary that reads from /dev/urandom.
test_stacktrace_build_id() calls readelf to read build ID of urandom_read
and compares it with build ID from the stackmap.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we have a kconfig checker just use that instead of relying
on testing a sysfs directory being present, since our requirements
are spelled out.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a kernel is not built with:
CONFIG_HAS_FW_LOADER_USER_HELPER_FALLBACK=y
We don't currently enable testing fw_fallback.sh. For kernels that
still enable the fallback mechanism, its possible to use the async
request firmware API call request_firmware_nowait() using the custom
interface to use the fallback mechanism, so we should be able to test
this but we currently cannot.
We can enable testing without CONFIG_HAS_FW_LOADER_USER_HELPER_FALLBACK=y
by relying on /proc/config.gz (CONFIG_IKCONFIG_PROC), if present. If you
don't have this we'll have no option but to rely on old heuristics for now.
We stuff the new kconfig_has() helper into our shared library as we'll
later expando on its use elsewhere.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We'll expland on this later, for now just add basic module checker.
While at it, move this all to use /bin/bash as we'll have much more
flexibility with it.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds tests to check:
- bind-mounts from /dev/pts/ptmx to /dev/ptmx work
- non-standard mounts of devpts work
- bind-mounts of /dev/pts/ptmx to locations that do not resolve to a valid
slave pty path under the originating devpts mount fail
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
POPF is currently broken -- add tests to catch the error. This
results in:
[RUN] POPF with VIP set and IF clear from vm86 mode
[INFO] Exited vm86 mode due to STI
[FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf)
because POPF currently fails to check IF before reporting a pending
interrupt.
This patch also makes the FAIL message a bit more informative.
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a logic error that caused the test to exit with 0 even if test
cases failed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bartoldeman@gmail.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Problem and motivation: Once a breakpoint perf event (PERF_TYPE_BREAKPOINT)
is created, there is no flexibility to change the breakpoint type
(bp_type), breakpoint address (bp_addr), or breakpoint length (bp_len). The
only option is to close the perf event and configure a new breakpoint
event. This inflexibility has a significant performance overhead. For
example, sampling-based, lightweight performance profilers (and also
concurrency bug detection tools), monitor different addresses for a short
duration using PERF_TYPE_BREAKPOINT and change the address (bp_addr) to
another address or change the kind of breakpoint (bp_type) from "write" to
a "read" or vice-versa or change the length (bp_len) of the address being
monitored. The cost of these modifications is prohibitive since it involves
unmapping the circular buffer associated with the perf event, closing the
perf event, opening another perf event and mmaping another circular buffer.
Solution: The new ioctl flag for perf events,
PERF_EVENT_IOC_MODIFY_ATTRIBUTES, introduced in this patch takes a pointer
to a struct perf_event_attr as an argument to update an old breakpoint
event with new address, type, and size. This facility allows retaining a
previous mmaped perf events ring buffer and avoids having to close and
reopen another perf event.
This patch supports only changing PERF_TYPE_BREAKPOINT event type; future
implementations can extend this feature. The patch replicates some of its
functionality of modify_user_hw_breakpoint() in
kernel/events/hw_breakpoint.c. modify_user_hw_breakpoint cannot be called
directly since perf_event_ctx_lock() is already held in _perf_ioctl().
Evidence: Experiments show that the baseline (not able to modify an already
created breakpoint) costs an order of magnitude (~10x) more than the
suggested optimization (having the ability to dynamically modifying a
configured breakpoint via ioctl). When the breakpoints typically do not
trap, the speedup due to the suggested optimization is ~10x; even when the
breakpoints always trap, the speedup is ~4x due to the suggested
optimization.
Testing: tests posted at
https://github.com/linux-contrib/perf_event_modify_bp demonstrate the
performance significance of this patch. Tests also check the functional
correctness of the patch.
Signed-off-by: Milind Chabbi <chabbi.milind@gmail.com>
[ Using modify_user_hw_breakpoint_check function. ]
[ Reformated PERF_EVENT_IOC_*, so the values are all in one column. ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-8-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Adding test that:
- detects the number of watch/break-points,
skip test if any is missing
- detects PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl,
skip test if it's missing
- detects if watchpoints and breakpoints share
same slots
- create all possible watchpoints on cpu 0
- change one of it to breakpoint
- in case wp and bp do not share slots,
we create another watchpoint to ensure
the slot accounting is correct
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180312134548.31532-9-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some processor revisions do not support transactional memory, and
additionally kernel support can be disabled. In either case the
tm-unavailable test should be skipped, otherwise it will fail with
a SIGILL.
That commit also sets this selftest to be called through the test
harness as it's done for other TM selftests.
Finally, it avoids using "ping" as a thread name since it's
ambiguous and can be confusing when shown, for instance,
in a kernel backtrace log.
Fixes: 77fad8bfb1 ("selftests/powerpc: Check FP/VEC on exception in TM")
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ensure that kernel is throwing away the suspended transaction when
sigreturn() is called otherwise it if fails to restore the signal
frame's TM SPRS.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Add have_htm() check, minor formatting, add SPDX tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some users want to be able to run the tests without a configuration file
which is useful when one needs to test both virtual and physical
interfaces on the same machine.
Move the defines that set the type of interface to create and whether to
create it away from the optional configuration file to the library like
the rest of the defines.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning 0 gives a false sense of success when the required modules did
not even manage to be initialized and register the required net devices.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already return an error when some dependencies (e.g., 'jq') are
missing so lets be consistent and do that for all.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the VLAN-aware bridge test, test the VLAN-unaware bridge and
make sure that ping, FDB learning and flooding work as expected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86/pti updates from Thomas Gleixner:
"Yet another pile of melted spectrum related updates:
- Drop native vsyscall support finally as it causes more trouble than
benefit.
- Make microcode loading more robust. There were a few issues
especially related to late loading which are now surfacing because
late loading of the IB* microcodes addressing spectre issues has
become more widely used.
- Simplify and robustify the syscall handling in the entry code
- Prevent kprobes on the entry trampoline code which lead to kernel
crashes when the probe hits before CR3 is updated
- Don't check microcode versions when running on hypervisors as they
are considered as lying anyway.
- Fix the 32bit objtool build and a coment typo"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
x86/pti: Fix a comment typo
x86/microcode: Synchronize late microcode loading
x86/microcode: Request microcode on the BSP
x86/microcode/intel: Look into the patch cache first
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode: Get rid of struct apply_microcode_ctx
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/vsyscall/64: Drop "native" vsyscalls
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
x86/entry: Do not special-case clone(2) in compat entry
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
x86/syscalls: Use proper syscall definition for sys_ioperm()
x86/entry: Remove stale syscall prototype
x86/syscalls/32: Simplify $entry == $compat entries
objtool: Fix 32-bit build
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes, perhaps most notably removing obsolete
code whose only purpose in life was to gather information for
the now-removed RCU debugfs facility. Other notable changes
include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel
boot parameter, minor optimizations for expedited grace periods,
some added tracing, creating an RCU-specific workqueue using Tejun's
new WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
bf28ae5627 ("tools/memory-model: Remove rb-dep, smp_read_barrier_depends, and lockless_dereference")
was merged too early, while it was still in RFC form. This patch adds in
the missing pieces.
Akira pointed out some typos in the original patch, and he noted that
cheatsheet.txt should indicate that READ_ONCE() now implies an address
dependency. Andrea suggested documenting the relationship betwwen
unsuccessful RMW operations and address dependencies.
Andrea pointed out that the macro for rcu_dereference() in linux.def
should now use the "once" annotation instead of "deref". He also
suggested that the comments should mention commit:
5a8897cc76 ("locking/atomics/alpha: Add smp_read_barrier_depends() to _release()/_relaxed() atomics")
... as an important precursor, and he contributed commit:
cb13b424e9 ("locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()")
which is another prerequisite.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Suggested-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
[ Fixed read_read_lock() typo reported by Akira. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: will.deacon@arm.com
Fixes: bf28ae5627 ("tools/memory-model: Remove rb-dep, smp_read_barrier_depends, and lockless_dereference")
Link: http://lkml.kernel.org/r/1520443660-16858-4-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.
---------------------------
running userfaultfd_hugetlb
---------------------------
invalid MiB
Usage: <MiB> <bounces>
[FAIL]
Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.
[zhijianx.li@intel.com: update changelog/comments and variable name]
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Sunplus S+core architecture was added in 2009 by Chen Liqin,
who has been co-maintaining it with Lennox Wu <lennox.wu@gmail.com>
since then, but after they both left the company, nobody else has shown
any interest in the port and it has seen almost no activity other than
tree-wide changes.
The gcc port was removed a few years ago due to the inactivity.
While the sunplus website still advertises products with unspecified
RISC cores that might be S+core based, it's very clear that the Linux
port is completely abandoned at this point.
This removes all files related to the architecture.
Acked-by: Lennox Wu <lennox.wu@gmail.com>
Link: http://www.sunplus.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Mitsubishi/Renesas m32r architecture has been around for many years,
but the Linux port has been obsolete for a very long time as well, with
the last significant updates done for linux-2.6.14.
While some m32r microcontrollers are still being marketed by Renesas,
those are apparently no longer possible to support, mainly due to the
lack of an external memory interface.
Hirokazu Takata was the maintainer until the architecture got marked
Orphaned in 2014.
Link: http://www.linux-m32r.org/
Link: https://www.renesas.com/en-eu/products/microcontrollers-microprocessors/m32r.html
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Fujitsu FRV kernel port has been around for a long time, but has not
seen regular updates in several years and instead was marked 'Orphaned'
in 2016 by long-time maintainer David Howells.
The SoC product line apparently is apparently still around in the form
of the Socionext Milbeaut image processor, but this one no longer uses
the FRV CPU cores.
This removes all FRV specific files from the kernel.
Link: http://www.socionext.com/en/products/assp/milbeaut/
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One notable fix to properly advertise our support for a new firmware feature,
caused by two series conflicting semantically but not textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but needed to
complete the userspace API and good to have before the driver is in a released
kernel.
Finally three minor selftest fixes, and a fix for intermittent build failures
for some obscure platforms, caused by a missing make dependency.
Thanks to:
Alastair D'Silva, Bharata B Rao, Guenter Roeck.
-----BEGIN PGP SIGNATURE-----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=ajRr
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix to properly advertise our support for a new firmware
feature, caused by two series conflicting semantically but not
textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but
needed to complete the userspace API and good to have before the
driver is in a released kernel.
Finally three minor selftest fixes, and a fix for intermittent build
failures for some obscure platforms, caused by a missing make
dependency.
Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"
* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix vector5 in ibm architecture vector table
ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
ocxl: Add get_metadata IOCTL to share OCXL information to userspace
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
selftests/powerpc: Fix missing clean of pmu/lib.o
powerpc/boot: Fix random libfdt related build errors
selftests/powerpc: Skip tm-trap if transactional memory is not enabled
Changed usbip_network, usbip_attach, usbip_list, and usbipd to use
and propagate the new error codes in server reply messages.
usbip_net_recv_op_common() is changed to take a pointer to status
return the status returned in the op_common.status to callers.
usbip_attach and usbip_list use the common interface to print error
messages to indicate why the request failed.
With this change the messages say why a request failed:
- when a client requests a device that is already exported:
usbip attach -r server_name -b 3-10.2
usbip: error: Attach Request for 3-10.2 failed - Device busy (exported)
- when a client requests a device that isn't exportable,
usbip attach -r server_name -b 3-10.4
usbip: error: Attach Request for 3-10.4 failed - Device not found
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently ST_OK and ST_NA are the only values used to communicate
status of a request from a client. Use new error codes to clearly
indicate what failed. For example, when client sends request to
import a device that isn't export-able, send ST_DEV_BUSY to the client.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently ST_OK and ST_NA are the only values defined to communicate
status of a request from a client. Add more error codes to clearly
indicate what failed. For example, when client sends request to import
a device that isn't export-able, server can send a specific error code
to the client.
Existing defines are moved to a common header in libsrc to be included
in the libusbip_la-usbip_common.o to be used by all the usbip tools.
Supporting interface to print error strings is added to the common lib.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel and tool version mismatch message is cryptic. Fix it to be
informative.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Attach device error message is cryptic and useless. Fix it to be
informative.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With option -P, the test script will pause just before
the post_suite functions are called. This allows the tester to
inspect the system before it is torn down.
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing the commands in the test cases, substitute
the test id for $TESTID. This helps to make more flexible
tests. For example, the testid can be given as a command
line argument.
As an example, if we wish to save the test output to a file
named for the test case, we can write in the test case:
"cmdUnderTest": "some test command | tee -a $TESTID.out"
Signed-off-by: Brenda J. Butler <bjb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even in quiet mode, make finishes with
rm tools/bpf/bpf_exp.lex.c
That's because it considers the file to be intermediate. Silence that by
mentioning the lex.c file instead of the lex.o file; the dependency still
stays.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Default to quiet build, with V=1 enabling verbose build as is usual.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use the descend macro to properly propagate $(subdir) to bpftool.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make the 'install' target depend on the 'all' target to build the binaries
first.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, make bpf_install in tools/ does not respect DESTDIR. Moreover, it
installs to /usr/bin/ unconditionally.
Let it respect DESTDIR and allow prefix to be specified. Also, to be more
consistent with bpftool and with the usual customs, default the prefix to
/usr/local instead of /usr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, the programs under tools/bpf (with the notable exception of
bpftool) do not respect the output directory (make O=dir). Fix that.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When building bpf tool, gcc emits piles of warnings:
prog.c: In function ‘prog_fd_by_tag’:
prog.c:101:9: warning: missing initializer for field ‘type’ of ‘struct bpf_prog_info’ [-Wmissing-field-initializers]
struct bpf_prog_info info = {};
^
In file included from /home/storage/jbenc/git/net-next/tools/lib/bpf/bpf.h:26:0,
from prog.c:47:
/home/storage/jbenc/git/net-next/tools/include/uapi/linux/bpf.h:925:8: note: ‘type’ declared here
__u32 type;
^
As these warnings are not useful, switch them off.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do:
ip li add lisa type vrf table 1101
ip li add veth1 type veth peer name veth2
And the follow message occurs if it isn't enabled:
Configuring interfaces
RTNETLINK answers: Operation not supported
This enables for NET_NRF (and friends) and VETH so we can create a vrf
table and veth.
Fixes: 153e1b84f4 ("selftests: Add FIB onlink tests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the links to the Quipper library. It is now
available from GitHub and has been updated.
Reported-by: Lakshman Annadorai <lakshmana@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520495985-2147-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 has several load and store instructions with target operand
addressing relative to the program counter, for example lrl, lgrl, strl,
stgrl.
These instructions are handled similar to x86. Objdump output displays
those instructions as:
9595c: c4 2d 00 09 9c 54 lgrl %r7,1c8540 <mp_+0x60>
This output is parsed (like on x86) and perf annotate shows those lines
as:
lgrl %r7,mp_+0x60
This patch handles the s390 specific instruction parsing for PC relative
load and store instructions.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180308120913.14802-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that beautifiers wanting to resolve kernel function addresses to
names can do its work, and when we use "perf report" for output of "perf
kmem record", we will get kernel symbol output.
This patch affect the output of "perf report" for the record data
generated by "perf kmem record" looks like below:
Before patch:
0.01% call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
0.01% call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
After patch:
0.01% (aa_alloc_task_context+0x27) call_site=ffffffff81370b87 ptr=0x428a3060 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL|GFP_ZERO
0.01% (__tty_buffer_request_room+0x88) call_site=ffffffff814e5828 ptr=0x99bb000 bytes_req=3616 bytes_alloc=4096 gfp_flags=GFP_ATOMIC
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180308032850.GA12383@udknight-ThinkPad-E550
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can see the output of feature compile in following files:
tools/build/feature/test-llvm.make.output
tools/build/feature/test-llvm-version.make.output
tools/build/feature/test-clang.make.output
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So they can follow the OUTPUT variable setup as the rest of the
features.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can see the status when we build perf, like:
$ make LIBCLANGLLVM=1 VF=1
... cxx: [ on ]
... llvm: [ on ]
... llvm-version: [ on ]
... clang: [ on ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have some .cpp files, make ctags/cscope aware of them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding MEM_TOPOLOGY feature to perf data file,
that will carry physical memory map and its
node assignments.
The format of data in MEM_TOPOLOGY is as follows:
0 - version | for future changes
8 - block_size_bytes | /sys/devices/system/memory/block_size_bytes
16 - count | number of nodes
For each node we store map of physical indexes for
each node:
32 - node id | node index
40 - size | size of bitmap
48 - bitmap | bitmap of memory indexes that belongs to node
| /sys/devices/system/node/node<NODE>/memory<INDEX>
The MEM_TOPOLOGY could be displayed with following
report command:
$ perf report --header-only -I
...
# memory nodes (nr 1, block size 0x8000000):
# 0 [7G]: 0-23,32-69
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-8-jolsa@kernel.org
[ Rename 'index' to 'idx', as this breaks the build in rhel5, 6 and other systems where this is used by glibc headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to refcnt logic instead of duplicating mem_info objects. No
functional change, just saving some memory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's passed along several hists entries in --hierarchy mode, so it's
better we keep track of it.
The current fail I see is that it gets removed in hierarchy --mem-mode
mode, where it's shared in the different hierarchies, but removed from
the template hist entry, so the report crashes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-6-jolsa@kernel.org
[ Rename mem_info__aloc() to mem_info__new(), to fix the typo and use the convention for constructors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's no longer used.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's used far more down to be declared on the top of the __cmd_record.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display more header info from perf.data file, following values:
$ perf report -i perf.data --header-only
...
# header version : 1
# data offset : 424
# data size : 3364280
# feat offset : 3364704
It's handy for debuging.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307155020.32613-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the output header for reporting forced groups via --groups
option on non grouped events, like:
$ perf record -e 'cycles,instructions'
$ perf report --stdio --group
Before:
# Samples: 24 of event 'anon group { cycles:u, instructions:u }'
After:
# Samples: 24 of events 'cycles:u, instructions:u'
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: ad52b8cb48 ("perf report: Add support to display group output for non group events")
Link: http://lkml.kernel.org/r/20180307155020.32613-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf annotate' displays function call assembler instructions with a
right arrow. Hitting enter on this line/instruction causes the browser
to disassemble this target function and show it on the screen. On s390
this results in an error message 'The called function was not found.'
The function call assembly line parsing does not handle the s390 bras
and brasl instructions. Function call__parse expects the target as first
operand:
callq e9140 <__fxstat>
S390 has a register number as first operand:
brasl %r14,41d60 <abort>
Therefore the target addresses on s390 are always zero which is an
invalid address.
Introduce a s390 specific call parsing function which skips the first
operand on s390.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180307134325.96106-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT code already has some preparation for AUX area sampling mode.
However the implementation has changed from the first proposal and one
of the side-effects is that it will not be impossible to support snapshot
mode and sampling mode at the same time.
Although there are no plans to support it, let validation (not yet
implemented) control whether it is allowed rather than low-level
functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
intel_pt_get_trace() fixes overlaps between the current buffer and the
previous buffer ('old_buffer').
However the previous buffer might not have had usable data (no PSB) so
the comparison must be made against the previous buffer that had usable
data.
Tidy that by keeping a pointer for that purpose in struct intel_pt_queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the new way sampling support will be implemented,
intel_pt_use_buffer_pid_tid() will not be needed. Get rid of it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520431349-30689-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.
If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.
However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.
Suppress the estimate by setting timestamp_insn_cnt to zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.
The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.
That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments
to perf_mmap__read_init(). The data is stored in the struct perf_mmap.
Discard the parameters.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite', 'start' and 'end' argument
to perf_mmap__read_event(). Discard them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It isn't necessary to pass the 'overwrite' argument to
perf_mmap__consume(). Discard it.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'overwrite' is set at allocation. It will not be changed. Using it
to replace the parameter of perf_mmap__consume(). The parameters will
be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the 'start', 'end' and 'overwrite' which are stored in
struct perf_mmap to replace the parameters of perf_mmap__read_event().
The parameters will be discarded later.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the 'start' and 'end' which are stored in struct perf_mmap to
replace the temporary 'start' and 'end'.
The temporary variables will be discarded later.
It doesn't need to pass 'overwrite' to perf_mmap__push(). It's stored in
struct perf_mmap.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is too much boilerplate in the perf_mmap__read*() interfaces.
The 'start' and 'end' variables should be stored in struct perf_mmap at
initialization. They will be used later.
The old 'startp' and 'endp' pointers are used by perf_mmap__read_event()
now. They cannot be removed. So the old 'startp/endp' and new
'md->start/md->end' will exist simultaneously now. The old one will be
removed later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has been determined that the map is for overwrite mode
(evlist->overwrite_mmap) or non-overwrite mode (evlist->mmap) when
calling perf_evlist__alloc_mmap().
Store the information in struct perf_mmap, which will be used later to
simplify the perf_mmap__read*() interfaces.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1520350567-80082-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce844 (perf stat: Only auto-merge events
that are PMU aliases).
Non-merging of legacy events is preserved:
$ perf stat -ag -e cache-misses,cache-misses sleep 1
Performance counter stats for 'system wide':
86,323 cache-misses
86,323 cache-misses
1.002623307 seconds time elapsed
But prefix or glob matching auto-merges the events created:
$ perf stat -a -e l3cache/read-miss/ sleep 1
Performance counter stats for 'system wide':
328 l3cache/read-miss/
1.002627008 seconds time elapsed
$ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1
Performance counter stats for 'system wide':
172 l3cache/read-miss/
1.002627008 seconds time elapsed
As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:
$ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
1.002622192 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To simplify creation of events accross multiple instances of the same
type of PMU stat supports two methods for creating multiple events from
a single event specification:
1. A prefix or glob can be used in the PMU name.
2. Aliases, which are listed immediately after the Kernel PMU events
by perf list, are used.
When the --no-merge option is passed and these events are displayed
individually the PMU name is lost and it's not possible to see which
count corresponds to which pmu:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
0.001675706 seconds time elapsed
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
12 l3cache_read_miss
17 l3cache_read_miss
10 l3cache_read_miss
8 l3cache_read_miss
0.001661305 seconds time elapsed
This change adds the original pmu name to the event. For dynamic pmu
events the pmu name is restored in the event name:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
63 l3cache_0_3/read-miss/
74 l3cache_0_1/read-miss/
64 l3cache_0_2/read-miss/
74 l3cache_0_0/read-miss/
0.001675706 seconds time elapsed
For alias events the name is added after the event name:
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
10 l3cache_read_miss [l3cache_0_3]
12 l3cache_read_miss [l3cache_0_1]
10 l3cache_read_miss [l3cache_0_2]
17 l3cache_read_miss [l3cache_0_0]
0.001661305 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I8056b9eda74bda33e95065056167ad96e97cb1fb
Link: http://lkml.kernel.org/r/1520345084-42646-3-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting on v4.12 event parsing code for dynamic pmu events already
supports prefix-based matching of multiple pmus when creating dynamic
events. E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
passing mypmu/<config>/ as an event spec will result in the creation of
the event in all of the pmus. This change expands this matching through
the use of fnmatch so glob-like expressions can be used to create events
in multiple pmus. E.g., in the system described above if a user only
wants to create the event in mypmu_0 and mypmu_1, mypmu_[01]/<config>/
can be passed.
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Change-Id: Icb25653fc5d5239c20f3bffdfdf4ab4c9c9bb20b
Link: http://lkml.kernel.org/r/1520454947-16977-1-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".
"emulate" is the default. All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow. In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls. (This is in contrast to vDSO functions,
which can be much faster than syscalls.) In "none" mode, there are
no vsyscalls.
For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation. It's been over six
years, and nothing has gone wrong. Delete it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-03-08
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix various BPF helpers which adjust the skb and its GSO information
with regards to SCTP GSO. The latter is a special case where gso_size
is of value GSO_BY_FRAGS, so mangling that will end up corrupting
the skb, thus bail out when seeing SCTP GSO packets, from Daniel(s).
2) Fix a compilation error in bpftool where BPF_FS_MAGIC is not defined
due to too old kernel headers in the system, from Jiri.
3) Increase the number of x64 JIT passes in order to allow larger images
to converge instead of punting them to interpreter or having them
rejected when the interpreter is not built into the kernel, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These patches remove the metag architecture and tightly dependent
drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
based metag toolchain we have been using is hitting compiler bugs, so
now seems a good time to drop it altogether.
-----BEGIN PGP SIGNATURE-----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=zDIl
-----END PGP SIGNATURE-----
Merge tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-generic
Remove metag architecture
These patches remove the metag architecture and tightly dependent
drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4
based metag toolchain we have been using is hitting compiler bugs, so
now seems a good time to drop it altogether.
* tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
i2c: img-scb: Drop METAG dependency
media: img-ir: Drop METAG dependency
watchdog: imgpdc: Drop METAG dependency
MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE
tty: Remove metag DA TTY and console driver
clocksource: Remove metag generic timer driver
irqchip: Remove metag irqchip drivers
Drop a bunch of metag references
docs: Remove remaining references to metag
docs: Remove metag docs
metag: Remove arch/metag/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix copy&paste error and pass proper flags.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the "ok" action test so it checks that packet that is okayed does not
continue to be processed by other rules. Fix error message as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One single test implemented so far: test_pmtu_vti6_exception
checks that the PMTU of a route exception, caused by a tunnel
exceeding the link layer MTU, is affected by administrative
changes of the tunnel MTU. Creation of the route exception is
checked too.
Requested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
execute the subprocess in netns using 'ip netns exec'
Fixes: cc30c93fa0 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add top level TAP header echo, testname and separator line to make
the output consistent with the common run_tests target.
This change prevents nested TAP13 headers output from individual tests.
Nested TAP13 headers could cause problems for some parsers.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
I've tested to process the perf man pages with asciidoctor that is
picker than asciidoc, and it revealed minor syntax errors in some
documents. Namely, the title markers aren't aligned with the previous
line, hence asciidoctor didn't recognize as titles.
This patch corrects these markers to be processed properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180307105441.28512-1-tiwai@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end, make
it return buffer_ptr instead of the caller.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename some buffer-queuing functions in preparation for supporting AUX area
sampling buffers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One can set a cgroup as a default cgroup to be used by all events or
set cgroups with the 'perf stat' and 'perf record' behaviour, i.e.
'-G A' will be the cgroup for events defined so far in the command line.
Here in my main machine, with a kvm instance running a rhel6 guinea pig
I have:
# ls -la /sys/fs/cgroup/perf_event/ | grep drw
drwxr-xr-x. 14 root root 360 Mar 6 12:04 ..
drwxr-xr-x. 3 root root 0 Mar 6 15:05 machine.slice
#
So I can go ahead and use that cgroup hierarchy, say lets see what
syscalls are being emitted by threads in that 'machine.slice' hierarchy
that are taking more than 100ms:
# perf trace --duration 100 -G machine.slice
0.188 (249.850 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
250.274 (249.743 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
500.224 (249.755 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
750.097 (249.934 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1000.244 (249.780 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1250.197 (249.796 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1500.124 (249.859 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
1750.076 (172.900 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
902.570 (1021.116 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
1923.825 (305.133 ms): qemu-system-x8/23667 ppoll(ufds: 0x558151e03180, nfds: 74, tsp: 0x7ffc00cd0900, sigsetsize: 8) = 1
2000.172 (229.002 ms): CPU 0/KVM/23744 ioctl(fd: 16<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
^C #
If we look inside that cgroup hierarchy we get:
# ls -la /sys/fs/cgroup/perf_event/machine.slice/ | grep drw
drwxr-xr-x. 3 root root 0 Mar 6 15:05 .
drwxr-xr-x. 2 root root 0 Mar 6 16:16 machine-qemu\x2d2\x2drhel6.sandy.scope
#
There is just one, but lets say there were more and we would want to see
5 seconds worth of syscall summary for the threads in that cgroup:
# perf trace --summary -G machine.slice/machine-qemu\\x2d2\\x2drhel6.sandy.scope/ -a sleep 5
Summary of events:
qemu-system-x86 (23667), 143858 events, 24.2%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ppoll 28492 4348.631 0.000 0.153 11.616 1.05%
futex 19661 140.801 0.001 0.007 2.993 3.20%
read 18440 68.084 0.001 0.004 1.653 4.33%
ioctl 5387 24.768 0.002 0.005 0.134 1.62%
CPU 0/KVM (23744), 449455 events, 75.8%
syscall calls total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- --------- --------- --------- --------- ------
ioctl 148364 3401.812 0.000 0.023 11.801 1.15%
futex 36131 404.127 0.001 0.011 7.377 2.63%
writev 29452 339.688 0.003 0.012 1.740 1.36%
write 11315 45.992 0.001 0.004 0.105 1.10%
#
See the documentation about how to set more than one cgroup for
different events in the same command line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t126jh4occqvu0xdqlcjygex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The usual thing is for a constructor to allocate space for its members,
not to require that the caller pass a pre-allocated 'name' and then, at
its destructor, to free something not allocated by it.
Fix it by making cgroup__new() to receive a const char pointer, then
allocate cgroup->name that then can continue to be freed at
cgroup__delete(), balancing the alloc/free operations inside the cgroup
struct methods.
This eases calling evlist__findnew_cgroup() from the custom 'perf trace'
cgroup parser, that will only call parse_cgroups() when the '-G cgroup'
is passed on the command line after '-e event' entries, when it'll
behave just like 'perf stat' and 'perf record', i.e. the previous
parse_cgroup() users that mandate that -G only can come after a -e.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4leugnuyqi10t98990o3xi1t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that tools like 'perf trace' can allow the user to set a cgroup
to be used for all the evsels still without a crgroup setup by
parse_cgroups(), such as the one to use for the syscalls, vfs_getname
and other events involved in strace like syscall tracing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zf9jjsbj661r3lk6qb7g8j70@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to machine__findnew_thread(), etc, i.e. try to find, get a
refcount if found and return it, otherwise return a new cgroup object.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-im1omevlihhyneiic4nl3g24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for adding AUX area sampling support, combine some
auxtrace initialization into a single function.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thread::shortname only used by sched command, so move it to sched
private structure.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1520307457-23668-2-git-send-email-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow the namespacing convention in tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jaalyl6bkvvji4r5u8wqw4n4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To break down complexity in add_cgroup().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5yqshcf5hm837n7c86u7lhjf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount operation counterpart to cgroup__put(), use it when reusing
a cgroup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-14ynvrl7y2cz8gyuy5q5v41g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not really closing the cgroup, but instead dropping a reference
count and if it hits zero, then calling delete, which will, among other
cleanup shores, close the cgroup fd.
So it is really dropping a reference to that cgroup, and the method name
for that is "put", so rename close_cgroup() to cgroup__put() to follow
this naming convention.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-sccxpnd7bgwc1llgokt6fcey@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just to make this code look more like other places in tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j3j72vvn2d5j7tenlghdy195@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That name isn't used, is shorter, lets switch to it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-e51yphwgvepd1y4f5fjptmjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'opt' parameter in parse_cgroups() _is_ used. The original patch
used '__used' that was even more confusing :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 023695d96e ("perf tool: Add cgroup support")
Link: https://lkml.kernel.org/n/tip-4jo2puz0empkoou6bbq460tl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit
host. This also simplifies read_retpoline_hints() a bit and makes its
implementation similar to most of the other annotation reading
functions.
Reported-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b5bc2231b8 ("objtool: Add retpoline validation")
Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Compilation of bpftool on a distro that lacks eBPF support in the installed
kernel headers fails with:
common.c: In function ‘is_bpffs’:
common.c:96:40: error: ‘BPF_FS_MAGIC’ undeclared (first use in this function)
return (unsigned long)st_fs.f_type == BPF_FS_MAGIC;
^
Fix this the same way it is already in tools/lib/bpf/libbpf.c and
tools/lib/api/fs/fs.c.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When you load nfit_test you currently see the following error in dmesg:
nfit_test nfit_test.0: found a zero length table '0' parsing nfit
This happens because when we parse the nfit_test.0 table via
acpi_nfit_init(), we specify a size of nfit_test->nfit_size. For the first
pass through nfit_test.0 where (t->setup_hotplug == 0) this is the size of
the entire buffer we allocated, including space for the hot plug
structures, not the size that we've actually filled in.
Fix this by only trying to parse the size of the structures that we've
filled in.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
It turns out that we were overrunning the 'nfit_buf' buffer in
nfit_test0_setup() in the (t->setup_hotplug == 1) case because we failed to
correctly account for all of the acpi_nfit_memory_map structures.
Fix the structure count which will increase the allocation size of
'nfit_buf' in nfit_test0_alloc(). Also add some WARN_ON()s to
nfit_test0_setup() and nfit_test1_setup() to catch future issues where the
size of the buffer doesn't match the amount of data we're writing.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In nfit_test0_setup() and nfit_test1_setup() we keep an 'offset' value
which we use to calculate where in our 'nfit_buf' we will place our next
structure. The handling of 'offset' and the calculation of the placement
of the next structure is a bit inconsistent, though. We don't update
'offset' after we insert each structure, sometimes causing us to update it
for multiple structures' sizes at once. When calculating the position of
the next structure we aren't always able to just use 'offset', but
sometimes have to add in other structure sizes as well.
Fix this by updating 'offset' after each structure insertion in a
consistent way, allowing us to always calculate the position of the next
structure to be inserted by just using 'nfit_buf + offset'.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The usage of strchr requires inclusion of string.h.
Fixes: 0c38cda64a ("tools: hv: remove unnecessary header files and netlink related code")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the below warnings with new glibc and gcc:
hv_vss_daemon.c💯13: warning: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is currently
defined by <sys/types.h> as well, but we plan to remove this soon.
To use "major", include <sys/sysmacros.h> directly.
hv_fcopy_daemon.c:42:2: note: 'snprintf' output between 2 and 1040
bytes into a destination of size 260
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Hyper-V the VF NIC has the same MAC as the related synthetic NIC.
VF NIC can work under the synthetic NIC transparently, without its
own IP address. The existing KVP daemon only gets IP from the first
NIC matching a MAC address, and may not be able to find the IP in
this case.
This patch fixes the problem by searching the NIC matching the MAC,
and having an IP address. So, the IP address will be found and
reported to the host successfully.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)
$ perf record -e intel_pt//u -S sleep 1
perf: Segmentation fault
Obtained 16 stack frames.
/home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
/home/ahunter/bin/perf() [0x43a45b]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
/home/ahunter/bin/perf() [0x4ec6c9]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4eca15]
/home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
/home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
/home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
/home/ahunter/bin/perf() [0x4a11ae]
/home/ahunter/bin/perf(main+0x5d4) [0x427fb4]
Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=TNRi
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180305' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All of the conflicts were cases of overlapping changes.
In net/core/devlink.c, we have to make care that the
resouce size_params have become a struct member rather
than a pointer to such an object.
Signed-off-by: David S. Miller <davem@davemloft.net>
Export KSFT_TAP_LEVEL and add TAP Header echo to the run_kselftest.sh
script from emit_tests target handling.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Introduce environment variable KSFT_TAP_LEVEL to avoid printing
nested TAP headers for each test. lib.mk run_tests target prints
TAP header before invoking the test program or test script. Tests
need a way to suppress TAP headers if it is already printed out.
This new environment variable adds a way for ksft_print_header()
print TAP header only when KSFT_TAP_LEVEL isn't set.
lib.mk run_tests and test program should print TAP header and set
KSFT_TAP_LEVEL to avoid a second TAP header to be printed.
selftests Makefile should export KSFT_TAP_LEVEL and add TAP Header
echo to the run_kselftest.sh script from emit_tests target handling.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Ion is designed to be a framework used by other clients who perform
operations on the buffer. Use the DRM vgem client as a simple consumer.
In conjunction with the dma-buf sync ioctls, this tests the full attach/map
path for the system heap.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
There's no need to print messages each time we alloc and free. Remove them.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This kselftest fixes update has a fix for regression in memory-hotplug
install script that prevents the test from running on the target.
-----BEGIN PGP SIGNATURE-----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=QfKZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix for regression in memory-hotplug install script that prevents
the test from running on the target"
* tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: fix emit_tests regression
Pull networking fixes from David Miller:
1) Use an appropriate TSQ pacing shift in mac80211, from Toke
Høiland-Jørgensen.
2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
in ip6_route_me_harder, from Eric Dumazet.
3) Fix several shutdown races and similar other problems in l2tp, from
James Chapman.
4) Handle missing XDP flush properly in tuntap, for real this time.
From Jason Wang.
5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
Borkmann.
6) Fix phy_resume() locking, from Andrew Lunn.
7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
from Xin Long.
8) Revert F-RTO middle box workarounds, they only handle one dimension
of the problem. From Yuchung Cheng.
9) Fix socket refcounting in RDS, from Ka-Cheong Poon.
10) Don't allow ppp unit registration to an unregistered channel, from
Guillaume Nault.
11) Various hv_netvsc fixes from Stephen Hemminger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
hv_netvsc: propagate rx filters to VF
hv_netvsc: filter multicast/broadcast
hv_netvsc: defer queue selection to VF
hv_netvsc: use napi_schedule_irqoff
hv_netvsc: fix race in napi poll when rescheduling
hv_netvsc: cancel subchannel setup before halting device
hv_netvsc: fix error unwind handling if vmbus_open fails
hv_netvsc: only wake transmit queue if link is up
hv_netvsc: avoid retry on send during shutdown
virtio-net: re enable XDP_REDIRECT for mergeable buffer
ppp: prevent unregistered channels from connecting to PPP units
tc-testing: skbmod: fix match value of ethertype
mlxsw: spectrum_switchdev: Check success of FDB add operation
net: make skb_gso_*_seglen functions private
net: xfrm: use skb_gso_validate_network_len() to check gso sizes
net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
rds: Incorrect reference counting in TCP socket creation
net: ethtool: don't ignore return from driver get_fecparam method
vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
...
For tests using veth interfaces, the test infrastructure can create
the netdevs if they do not exist. Arguably this is a preferred approach
since the tests require p$N and p$(N+1) to be pairs.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the tc action test is used only to test mirred redirect
action. This patch extends it for mirred mirror.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes in dd84441a79 ("x86/speculation: Use IBRS if available
before calling into firmware") don't need any kind of special treatment
in the current tools/perf/ codebase, so just update the copy to get rid
of the perf build warning:
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mzmuxocrf96v922xkerey3ns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':
┌─Warning:──────────────────────┐
│fall back to non-overwrite mode│
│ │
│ │
│Press any key... │
└───────────────────────────────┘
The 'perf top' utility has been changed to overwrite mode since commit
ebebbf0823 ("perf top: Switch default mode to overwrite mode").
For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.
The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Discards legacy interfaces perf_evlist__mmap_read_forward(),
perf_evlist__mmap_read() and perf_evlist__mmap_consume().
No tools use them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-14-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'task-exit' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test exit
21: Number of exit events of a simple workload : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-13-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'switch-tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test switch
32: Track with sched_switch : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-12-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'sw-clock' still use the legacy interface.
No functional change.
Committer testing:
# perf test clock
22: Software clock events period values : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-11-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'time-to-tsc' still use the legacy interface.
No functional change.
Commiter notes:
Testing it:
# perf test tsc
57: Convert perf time to TSC : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-10-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'perf-record' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test PERF_RECORD
8: PERF_RECORD_* events & perf_sample fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-9-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'syscalls:sys_enter_openat event fields' still use the
legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test sys_enter_openat
15: syscalls:sys_enter_openat event fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-8-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'mmap-basic' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test "mmap interface"
4: Read samples using the mmap interface : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-7-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'keep tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test tracking
25: Use a dummy software event to keep tracking : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-6-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'object code reading' still use the legacy interface.
No functional change.
Committer notes:
Testing:
# perf test reading
23: Object code reading: Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-5-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'bpf' still use the legacy interface.
No functional change.
Committer notes:
Tested with:
# perf test bpf
39: BPF filter :
39.1: Basic BPF filtering : Ok
39.2: BPF pinning : Ok
39.3: BPF prologue generation : Ok
39.4: BPF relocation checker : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-4-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf trace' utility still use the legacy interface.
Switch to the new perf_mmap__read_event() interface.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-2-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf kvm still use the legacy interface.
Switch to the new perf_mmap__read_event() interface for perf kvm.
No functional change.
Committer notes:
Tested before and after running:
# perf kvm stat record
On a machine with a kvm guest, then used:
# perf kvm stat report
Before/after results match and look like:
# perf kvm stat record -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.132 MB perf.data.guest (1828 samples) ]
# perf kvm stat report
Analyze events for all VMs, all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
IO_INSTRUCTION 258 40.06% 0.08% 3.51us 122.54us 14.87us (+- 6.76%)
MSR_WRITE 178 27.64% 0.01% 0.47us 6.34us 2.18us (+- 4.80%)
EPT_MISCONFIG 148 22.98% 0.03% 3.76us 65.60us 11.22us (+- 8.14%)
HLT 47 7.30% 99.88% 181.69us 249988.06us 102061.36us (+-13.49%)
PAUSE_INSTRUCTION 5 0.78% 0.00% 0.38us 0.79us 0.47us (+-17.05%)
MSR_READ 4 0.62% 0.00% 1.14us 3.33us 2.67us (+-19.35%)
EXTERNAL_INTERRUPT 2 0.31% 0.00% 2.15us 2.17us 2.16us (+- 0.30%)
PENDING_INTERRUPT 1 0.16% 0.00% 2.56us 2.56us 2.56us (+- 0.00%)
PREEMPTION_TIMER 1 0.16% 0.00% 3.21us 3.21us 3.21us (+- 0.00%)
Total Samples:644, Total events handled time:4802790.72us.
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-1-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we do it just once, not everytime we press enter or -> on a
'call' instruction line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-uysyojl1e6nm94amzzzs08tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf record -F 200000 sleep 1
warning: Maximum frequency rate (15,000 Hz) exceeded, throttling from 200,000 Hz to 15,000 Hz.
The limit can be raised via /proc/sys/kernel/perf_event_max_sample_rate.
The kernel will lower it when perf's interrupts take too long.
Use --strict-freq to disable this throttling, refusing to record.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (15 samples) ]
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
For those wanting that it fails if the desired frequency can't be used:
# perf record --strict-freq -F 200000 sleep 1
error: Maximum frequency rate (15,000 Hz) exceeded.
Please use -F freq option with a lower value or consider
tweaking /proc/sys/kernel/perf_event_max_sample_rate.
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oyebruc44nlja499nqkr1nzn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
