The QVGA resolution currently hasn't been verified to work. Disable it for now.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove some redundant init from the s5k4aa. All these registers are programmed again later in the init phase
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
mt9m111: Hflip and vflip shall always be 0 at start and the image shall be correctly aligned.
The mt9m111 is hflipped and vflipped by default. Correct the semantics to make this happen.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Based on how the ov9650 is configured, make an educated guess on the hsync/vsync setup for the ov7660
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to
reliably tell when we have written to this register successfully unless we
change some bits we know we can read back. The AI mux bits always read back
what we wrote to them, so force them to toggle whenever we have to write to
the register, so we can tell we wrote to the register successfully.
This change was prompted by users experiencing broadcast audio decoding
problems after the cx18 module loads for the first time.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add code to verify the cx18-av-core digitizer firmware loads correctly. The
verification function reads back and compares the firmware bytes loaded
into the A/V core. The result of the verification is only used to log a
message in the system log.
This change was prompted by users with multiple card setups that have problems
with broadcast audio decoding the first time the cx18 module is loaded.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should
use an MPEG-2 PS container. This makes it safe to stuff IVTV Private Stream 1
VBI packets in these stream types using the existing cx18 driver routines.
Reported-by: Helen Buus <mythtv@hbuus.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Simplify the way outgoing work handler gets scheduled to send empty buffers
back to the firmware for use. Also reduced the memory required for scheduling
this outgoing work, by using a single, per stream work object.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
To avoid sleeps in providing buffers to user space and in handling incoming
buffers from the capture unit, converted the per stream mutex for locking
queues to 3 spin locks. There is now a spin lock per queue
to increase concurrency when moving buffers around.
Also simplified queue manipulations and buffer handling of incoming buffers
of data from the capture unit.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When sending an outgoing firmware command, prepare to wait before we raise the
interrupt, so we don't miss the wake_up() on the acknowledgment. When waiting
for the acknowledgement, there is no need to loop around schedule(), as there
will only be one interrupt, and hence one wake_up(), issued.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This change defers sending all CX18_CPU_DE_SET_MDL commands, for a stream with
an ongoing capture, by adding a work queue to handle sending such commands when
needed. This prevents any sleeps, caused by notifying the firmware of new
usable buffers, when a V4L2 application read() is being satisfied or when
an incoming buffer is processed by the cx18-NN-in work queue thread.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rename the work queue to "in_work_queue" to indicate it is handling
incoming mailbox commands. This is preparation for adding a work queue
for handling deferrable outgoing mailbox commands.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
With the transition of soc-camera to become a platform driver and to the
v4l2-subdev framework the initialisation order becomes important. In case
of a static build clients (i2c) drivers have to be available when host
drivers are probed. Moving host drivers down in the Makefile achieves the
desired order.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Register access routines only need the I2C client, not the soc-camera device
context.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Make camera devices direct children of host platform devices, move the
inheritance management into the soc_camera.c core driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Embed struct soc_camera_host in platform-specific per host instance objects
instead of allocating them statically in drivers, use platform_[gs]et_drvdata
consistently, use resource_size().
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Currently pcm990 camera bus-width management functions request a GPIO and never
free it again. With this approach the GPIO extender driver cannot be unloaded
once camera drivers have been loaded, also unloading theb i2c-pxa bus driver
produces errors, because the GPIO extender driver cannot unregister properly.
Another problem is, that if camera drivers are once loaded before the GPIO
extender driver, the platform code marks the GPIO unavailable and only a reboot
helps to recover. Adding an explicit free_bus method and using it in mt9m001
and mt9v022 drivers fixes these problems.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including
remote control. TV, Composite and FM radio tested, I don't have S-Video to
test. I've figured out that the radio works only with xtal frequency 13MHz.
[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch fixes:
* Cut revision was read too late
* Missing increment
* wrong return value
* mismatched entries
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
