Commit Graph

285 Commits

Author SHA1 Message Date
Linus Torvalds
f6167514c8 Merge branch 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "My patch fixes the btrfs list_head abuse that we tracked down during
  Dave Jones' memory corruption investigation. With both Jens and my
  patches in place, I'm no longer able to trigger problems.

  Filipe is fixing a difficult old bug between snapshots, balance and
  send. Dave is cooking a few more for the next rc, but these are tested
  and ready"

* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix races on root_log_ctx lists
  btrfs: fix incremental send failure caused by balance
2016-10-28 10:07:35 -07:00
Chris Mason
570dd45042 btrfs: fix races on root_log_ctx lists
btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the
list because it knows all of the waiters are patiently waiting for the
commit to finish.

But, there's a small race where btrfs_sync_log can remove itself from
the list if it finds a log commit is already done.  Also, it uses
list_del_init() to remove itself from the list, but there's no way to
know if btrfs_remove_all_log_ctxs has already run, so we don't know for
sure if it is safe to call list_del_init().

This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and
just calls it with the proper locking.

This is part two of the corruption fixed by cbd60aa7cd.  I should have
done this in the first place, but convinced myself the optimizations were
safe.  A 12 hour run of dbench 2048 will eventually trigger a list debug
WARN_ON for the list_del_init() in btrfs_sync_log().

Fixes: d1433debe7
Reported-by: Dave Jones <davej@codemonkey.org.uk>
cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Chris Mason <clm@fb.com>
2016-10-27 10:42:20 -07:00
Linus Torvalds
f29135b54b Merge branch 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This is a big variety of fixes and cleanups.

  Liu Bo continues to fixup fuzzer related problems, and some of Josef's
  cleanups are prep for his bigger extent buffer changes (slated for
  v4.10)"

* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (39 commits)
  Revert "btrfs: let btrfs_delete_unused_bgs() to clean relocated bgs"
  Btrfs: remove unnecessary btrfs_mark_buffer_dirty in split_leaf
  Btrfs: don't BUG() during drop snapshot
  btrfs: fix btrfs_no_printk stub helper
  Btrfs: memset to avoid stale content in btree leaf
  btrfs: parent_start initialization cleanup
  btrfs: Remove already completed TODO comment
  btrfs: Do not reassign count in btrfs_run_delayed_refs
  btrfs: fix a possible umount deadlock
  Btrfs: fix memory leak in do_walk_down
  btrfs: btrfs_debug should consume fs_info when DEBUG is not defined
  btrfs: convert send's verbose_printk to btrfs_debug
  btrfs: convert pr_* to btrfs_* where possible
  btrfs: convert printk(KERN_* to use pr_* calls
  btrfs: unsplit printed strings
  btrfs: clean the old superblocks before freeing the device
  Btrfs: kill BUG_ON in run_delayed_tree_ref
  Btrfs: don't leak reloc root nodes on error
  btrfs: squash lines for simple wrapper functions
  Btrfs: improve check_node to avoid reading corrupted nodes
  ...
2016-10-11 11:23:06 -07:00
Jeff Mahoney
5d163e0e68 btrfs: unsplit printed strings
CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."

This patch unsplits user-visible strings.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26 18:08:44 +02:00
Josef Bacik
afcdd129e0 Btrfs: add a flags field to btrfs_fs_info
We have a lot of random ints in btrfs_fs_info that can be put into flags.  This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26 17:59:49 +02:00
Miklos Szeredi
f031221001 btrfs: use filemap_check_errors()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Cc: Chris Mason <clm@fb.com>
2016-09-16 12:44:21 +02:00
Chris Mason
cbd60aa7cd Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns
We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out.  It gets added to a per
log-transaction list which we walk when things go bad.

Commit d1433debe added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list.  This
patch makes sure we remove things before exiting.

Signed-off-by: Chris Mason <clm@fb.com>
Fixes: d1433debe7
cc: stable@vger.kernel.org # 3.15+
2016-09-06 05:57:25 -07:00
Filipe Manana
28a235931b Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Commit 44f714dae5 ("Btrfs: improve performance on fsync against new
inode after rename/unlink"), which landed in 4.8-rc2, introduced a
possibility for a deadlock due to double locking of an inode's log mutex
by the same task, which lockdep reports with:

[23045.433975] =============================================
[23045.434748] [ INFO: possible recursive locking detected ]
[23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted
[23045.436044] ---------------------------------------------
[23045.436044] xfs_io/3688 is trying to acquire lock:
[23045.436044]  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               but task is already holding lock:
[23045.436044]  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               other info that might help us debug this:
[23045.436044]  Possible unsafe locking scenario:

[23045.436044]        CPU0
[23045.436044]        ----
[23045.436044]   lock(&ei->log_mutex);
[23045.436044]   lock(&ei->log_mutex);
[23045.436044]
                *** DEADLOCK ***

[23045.436044]  May be due to missing lock nesting notation

[23045.436044] 3 locks held by xfs_io/3688:
[23045.436044]  #0:  (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs]
[23045.436044]  #1:  (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0
[23045.436044]  #2:  (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
               stack backtrace:
[23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1
[23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[23045.436044]  0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70
[23045.436044]  ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68
[23045.436044]  0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68
[23045.436044] Call Trace:
[23045.436044]  [<ffffffff8127074d>] dump_stack+0x67/0x90
[23045.436044]  [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e
[23045.436044]  [<ffffffff8109155f>] ? mark_lock+0x24/0x201
[23045.436044]  [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74
[23045.436044]  [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3
[23045.436044]  [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs]
[23045.436044]  [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]  [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465
[23045.436044]  [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs]
[23045.436044]  [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs]
[23045.436044]  [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs]
[23045.436044]  [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs]
[23045.436044]  [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs]
[23045.436044]  [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e
[23045.436044]  [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e
[23045.436044]  [<ffffffff811acc79>] do_fsync+0x31/0x4a
[23045.436044]  [<ffffffff811ace99>] SyS_fsync+0x10/0x14
[23045.436044]  [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8
[23045.436044]  [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa

An example reproducer for this is:

   $ mkfs.btrfs -f /dev/sdb
   $ mount /dev/sdb /mnt
   $ mkdir /mnt/dir
   $ touch /mnt/dir/foo
   $ sync
   $ mv /mnt/dir/foo /mnt/dir/bar
   $ touch /mnt/dir/foo
   $ xfs_io -c "fsync" /mnt/dir/bar

This is because while logging the inode of file bar we end up logging its
parent directory (since its inode has an unlink_trans field matching the
current transaction id due to the rename operation), which in turn logs
the inodes for all its new dentries, so that the new inode for the new
file named foo gets logged which in turn triggered another logging attempt
for the inode we are fsync'ing, since that inode had an old name that
corresponds to the name of the new inode.

So fix this by ensuring that when logging the inode for a new dentry that
has a name matching an old name of some other inode, we don't log again
the original inode that we are fsync'ing.

Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25 03:58:32 -07:00
Qu Wenruo
df2c95f33e btrfs: qgroup: Fix qgroup incorrectness caused by log replay
When doing log replay at mount time(after power loss), qgroup will leak
numbers of replayed data extents.

The cause is almost the same of balance.
So fix it by manually informing qgroup for owner changed extents.

The bug can be detected by btrfs/119 test case.

Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-08-25 03:58:23 -07:00
Chris Mason
1083881654 Merge branch 'integration-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.8 2016-08-05 12:25:05 -07:00
Filipe Manana
44f714dae5 Btrfs: improve performance on fsync against new inode after rename/unlink
With commit 56f23fdbb6 ("Btrfs: fix file/data loss caused by fsync after
rename and new inode") we got simple fix for a functional issue when the
following sequence of actions is done:

  at transaction N
  create file A at directory D
  at transaction N + M (where M >= 1)
  move/rename existing file A from directory D to directory E
  create a new file named A at directory D
  fsync the new file
  power fail

The solution was to simply detect such scenario and fallback to a full
transaction commit when we detect it. However this turned out to had a
significant impact on throughput (and a bit on latency too) for benchmarks
using the dbench tool, which simulates real workloads from smbd (Samba)
servers. For example on a test vm (with a debug kernel):

Unpatched:
Throughput 19.1572 MB/sec  32 clients  32 procs  max_latency=1005.229 ms

Patched:
Throughput 23.7015 MB/sec  32 clients  32 procs  max_latency=809.206 ms

The patched results (this patch is applied) are similar to the results of
a kernel with the commit 56f23fdbb6 ("Btrfs: fix file/data loss caused
by fsync after rename and new inode") reverted.

This change avoids the fallback to a transaction commit and instead makes
sure all the names of the conflicting inode (the one that had a name in a
past transaction that matches the name of the new file in the same parent
directory) are logged so that at log replay time we don't lose neither the
new file nor the old file, and the old file gets the name it was renamed
to.

This also ends up avoiding a full transaction commit for a similar case
that involves an unlink instead of a rename of the old file:

  at transaction N
  create file A at directory D
  at transaction N + M (where M >= 1)
  remove file A
  create a new file named A at directory D
  fsync the new file
  power fail

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-08-01 07:32:14 +01:00
Jeff Mahoney
66642832f0 btrfs: btrfs_abort_transaction, drop root parameter
__btrfs_abort_transaction doesn't use its root parameter except to
obtain an fs_info pointer.  We can obtain that from trans->root->fs_info
for now and from trans->fs_info in a later patch.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26 13:54:26 +02:00
Jeff Mahoney
3cdde2240d btrfs: btrfs_test_opt and friends should take a btrfs_fs_info
btrfs_test_opt and friends only use the root pointer to access
the fs_info.  Let's pass the fs_info directly in preparation to
eliminate similar patterns all over btrfs.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26 13:53:16 +02:00
Liu Bo
fb770ae414 Btrfs: fix read_node_slot to return errors
We use read_node_slot() to read btree node and it has two cases,
a) slot is out of range, which means 'no such entry'
b) we fail to read the block, due to checksum fails or corrupted
   content or not with uptodate flag.
But we're returning NULL in both cases, this makes it return -ENOENT
in case a) and return -EIO in case b), and this fixes its callers
as well as btrfs_search_forward() 's caller to catch the new errors.

The problem is reported by Peter Becker, and I can manage to
hit the same BUG_ON by mounting my fuzz image.

Reported-by: Peter Becker <floyd.net@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26 13:52:25 +02:00
Linus Torvalds
4c6459f945 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "The most user visible change here is a fix for our recent superblock
  validation checks that were causing problems on non-4k pagesized
  systems"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: btrfs_check_super_valid: Allow 4096 as stripesize
  btrfs: remove build fixup for qgroup_account_snapshot
  btrfs: use new error message helper in qgroup_account_snapshot
  btrfs: avoid blocking open_ctree from cleaner_kthread
  Btrfs: don't BUG_ON() in btrfs_orphan_add
  btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
  Btrfs: check if extent buffer is aligned to sectorsize
  btrfs: Use correct format specifier
2016-06-18 05:57:59 -10:00
Liu Bo
c871b0f2fd Btrfs: check if extent buffer is aligned to sectorsize
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer
via alloc_extent_buffer().  An unaligned eb can have more pages than it
should have, which ends up extent buffer's leak or some corrupted content
in extent buffer.

This adds a warning to let us quickly know what was happening.

Now that alloc_extent_buffer() no more returns NULL, this changes its
caller and callers of its caller to match with the new error
handling.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17 18:32:40 +02:00
Linus Torvalds
559b6d90a0 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs cleanups and fixes from Chris Mason:
 "We have another round of fixes and a few cleanups.

  I have a fix for short returns from btrfs_copy_from_user, which
  finally nails down a very hard to find regression we added in v4.6.

  Dave is pushing around gfp parameters, mostly to cleanup internal apis
  and make it a little more consistent.

  The rest are smaller fixes, and one speelling fixup patch"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (22 commits)
  Btrfs: fix handling of faults from btrfs_copy_from_user
  btrfs: fix string and comment grammatical issues and typos
  btrfs: scrub: Set bbio to NULL before calling btrfs_map_block
  Btrfs: fix unexpected return value of fiemap
  Btrfs: free sys_array eb as soon as possible
  btrfs: sink gfp parameter to convert_extent_bit
  btrfs: make state preallocation more speculative in __set_extent_bit
  btrfs: untangle gotos a bit in convert_extent_bit
  btrfs: untangle gotos a bit in __clear_extent_bit
  btrfs: untangle gotos a bit in __set_extent_bit
  btrfs: sink gfp parameter to set_record_extent_bits
  btrfs: sink gfp parameter to set_extent_new
  btrfs: sink gfp parameter to set_extent_defrag
  btrfs: sink gfp parameter to set_extent_delalloc
  btrfs: sink gfp parameter to clear_extent_dirty
  btrfs: sink gfp parameter to clear_record_extent_bits
  btrfs: sink gfp parameter to clear_extent_bits
  btrfs: sink gfp parameter to set_extent_bits
  btrfs: make find_workspace warn if there are no workspaces
  btrfs: make find_workspace always succeed
  ...
2016-05-27 16:37:36 -07:00
David Sterba
42f31734eb Merge branch 'cleanups-4.7' into for-chris-4.7-20160525 2016-05-25 22:51:03 +02:00
Nicholas D Steeves
0132761017 btrfs: fix string and comment grammatical issues and typos
Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25 22:35:14 +02:00
Linus Torvalds
07be1337b9 Merge branch 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This has our merge window series of cleanups and fixes.  These target
  a wide range of issues, but do include some important fixes for
  qgroups, O_DIRECT, and fsync handling.  Jeff Mahoney moved around a
  few definitions to make them easier for userland to consume.

  Also whiteout support is included now that issues with overlayfs have
  been cleared up.

  I have one more fix pending for page faults during btrfs_copy_from_user,
  but I wanted to get this bulk out the door first"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (90 commits)
  btrfs: fix memory leak during RAID 5/6 device replacement
  Btrfs: add semaphore to synchronize direct IO writes with fsync
  Btrfs: fix race between block group relocation and nocow writes
  Btrfs: fix race between fsync and direct IO writes for prealloc extents
  Btrfs: fix number of transaction units for renames with whiteout
  Btrfs: pin logs earlier when doing a rename exchange operation
  Btrfs: unpin logs if rename exchange operation fails
  Btrfs: fix inode leak on failure to setup whiteout inode in rename
  btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT
  Btrfs: pin log earlier when renaming
  Btrfs: unpin log if rename operation fails
  Btrfs: don't do unnecessary delalloc flushes when relocating
  Btrfs: don't wait for unrelated IO to finish before relocation
  Btrfs: fix empty symlink after creating symlink and fsync parent dir
  Btrfs: fix for incorrect directory entries after fsync log replay
  btrfs: build fixup for qgroup_account_snapshot
  btrfs: qgroup: Fix qgroup accounting when creating snapshot
  Btrfs: fix fspath error deallocation
  btrfs: make find_workspace warn if there are no workspaces
  btrfs: make find_workspace always succeed
  ...
2016-05-21 10:49:22 -07:00
Chris Mason
c315ef8d9d Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.7
Signed-off-by: Chris Mason <clm@fb.com>
2016-05-17 14:43:19 -07:00
Filipe Manana
5f9a8a51d8 Btrfs: add semaphore to synchronize direct IO writes with fsync
Due to the optimization of lockless direct IO writes (the inode's i_mutex
is not held) introduced in commit 38851cc19a ("Btrfs: implement unlocked
dio write"), we started having races between such writes with concurrent
fsync operations that use the fast fsync path. These races were addressed
in the patches titled "Btrfs: fix race between fsync and lockless direct
IO writes" and "Btrfs: fix race between fsync and direct IO writes for
prealloc extents". The races happened because the direct IO path, like
every other write path, does create extent maps followed by the
corresponding ordered extents while the fast fsync path collected first
ordered extents and then it collected extent maps. This made it possible
to log file extent items (based on the collected extent maps) without
waiting for the corresponding ordered extents to complete (get their IO
done). The two fixes mentioned before added a solution that consists of
making the direct IO path create first the ordered extents and then the
extent maps, while the fsync path attempts to collect any new ordered
extents once it collects the extent maps. This was simple and did not
require adding any synchonization primitive to any data structure (struct
btrfs_inode for example) but it makes things more fragile for future
development endeavours and adds an exceptional approach compared to the
other write paths.

This change adds a read-write semaphore to the btrfs inode structure and
makes the direct IO path create the extent maps and the ordered extents
while holding read access on that semaphore, while the fast fsync path
collects extent maps and ordered extents while holding write access on
that semaphore. The logic for direct IO write path is encapsulated in a
new helper function that is used both for cow and nocow direct IO writes.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-13 01:59:36 +01:00
Filipe Manana
3f9749f6e9 Btrfs: fix empty symlink after creating symlink and fsync parent dir
If we create a symlink, fsync its parent directory, crash/power fail and
mount the filesystem, we end up with an empty symlink, which not only is
useless it's also not allowed in linux (the man page symlink(2) is well
explicit about that).  So we just need to make sure to fully log an inode
if it's a symlink, to ensure its inline extent gets logged, ensuring the
same behaviour as ext3, ext4, xfs, reiserfs, f2fs, nilfs2, etc.

Example reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/testdir
  $ sync
  $ ln -s /mnt/foo /mnt/testdir/bar
  $ xfs_io -c fsync /mnt/testdir
  <power fail>
  $ mount /dev/sdb /mnt
  $ readlink /mnt/testdir/bar
  <empty string>

A test case for fstests follows soon.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-05-13 01:59:12 +01:00
Filipe Manana
657ed1aa48 Btrfs: fix for incorrect directory entries after fsync log replay
If we move a directory to a new parent and later log that parent and don't
explicitly log the old parent, when we replay the log we can end up with
entries for the moved directory in both the old and new parent directories.
Besides being ilegal to have directories with multiple hard links in linux,
it also resulted in the leaving the inode item with a link count of 1.
A similar issue also happens if we move a regular file - after the log tree
is replayed the file has a link in both the old and new parent directories,
when it should be only at the new directory.

Sample reproducer:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ mkdir /mnt/x
  $ mkdir /mnt/y
  $ touch /mnt/x/foo
  $ mkdir /mnt/y/z
  $ sync
  $ ln /mnt/x/foo /mnt/x/bar
  $ mv /mnt/y/z /mnt/x/z
  < power fail >
  $ mount /dev/sdc /mnt
  $ ls -1Ri /mnt
  /mnt:
  257 x
  258 y

  /mnt/x:
  259 bar
  259 foo
  260 z

  /mnt/x/z:

  /mnt/y:
  260 z

  /mnt/y/z:

  $ umount /dev/sdc
  $ btrfs check /dev/sdc
  Checking filesystem on /dev/sdc
  UUID: a67e2c4a-a4b4-4fdc-b015-9d9af1e344be
  checking extents
  checking free space cache
  checking fs roots
  root 5 inode 260 errors 2000, link count wrong
        unresolved ref dir 257 index 4 namelen 1 name z filetype 2 errors 0
        unresolved ref dir 258 index 2 namelen 1 name z filetype 2 errors 0
  (...)

Attempting to remove the directory becomes impossible:

  $ mount /dev/sdc /mnt
  $ rmdir /mnt/y/z
  $ ls -lh /mnt/y
  ls: cannot access /mnt/y/z: No such file or directory
  total 0
  d????????? ? ? ? ?            ? z
  $ rmdir /mnt/x/z
  rmdir: failed to remove ‘/mnt/x/z’: Stale file handle
  $ ls -lh /mnt/x
  ls: cannot access /mnt/x/z: Stale file handle
  total 0
  -rw-r--r-- 2 root root 0 Apr  6 18:06 bar
  -rw-r--r-- 2 root root 0 Apr  6 18:06 foo
  d????????? ? ?    ?    ?            ? z

So make sure that on rename we set the last_unlink_trans value for our
inode, even if it's a directory, to the value of the current transaction's
ID and that if the new parent directory is logged that we fallback to a
transaction commit.

A test case for fstests is being submitted as well.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-05-13 01:59:11 +01:00
Al Viro
84695ffee7 Merge getxattr prototype change into work.lookups
The rest of work.xattr stuff isn't needed for this branch
2016-05-02 19:45:47 -04:00
David Sterba
91166212e0 btrfs: sink gfp parameter to clear_extent_bits
Callers pass GFP_NOFS and GFP_KERNEL. No need to pass the flags around.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29 11:01:47 +02:00
Anand Jain
34d9700702 btrfs: rename btrfs_std_error to btrfs_handle_fs_error
btrfs_std_error() handles errors, puts FS into readonly mode
(as of now). So its good idea to rename it to btrfs_handle_fs_error().

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ edit changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-28 10:36:54 +02:00
Al Viro
fc64005c93 don't bother with ->d_inode->i_sb - it's always equal to ->d_sb
... and neither can ever be NULL

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10 17:11:51 -04:00
Filipe Manana
56f23fdbb6 Btrfs: fix file/data loss caused by fsync after rename and new inode
If we rename an inode A (be it a file or a directory), create a new
inode B with the old name of inode A and under the same parent directory,
fsync inode B and then power fail, at log tree replay time we end up
removing inode A completely. If inode A is a directory then all its files
are gone too.

Example scenarios where this happens:
This is reproducible with the following steps, taken from a couple of
test cases written for fstests which are going to be submitted upstream
soon:

   # Scenario 1

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir -p /mnt/a/x
   echo "hello" > /mnt/a/x/foo
   echo "world" > /mnt/a/x/bar
   sync
   mv /mnt/a/x /mnt/a/y
   mkdir /mnt/a/x
   xfs_io -c fsync /mnt/a/x
   <power failure happens>

   The next time the fs is mounted, log tree replay happens and
   the directory "y" does not exist nor do the files "foo" and
   "bar" exist anywhere (neither in "y" nor in "x", nor the root
   nor anywhere).

   # Scenario 2

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir /mnt/a
   echo "hello" > /mnt/a/foo
   sync
   mv /mnt/a/foo /mnt/a/bar
   echo "world" > /mnt/a/foo
   xfs_io -c fsync /mnt/a/foo
   <power failure happens>

   The next time the fs is mounted, log tree replay happens and the
   file "bar" does not exists anymore. A file with the name "foo"
   exists and it matches the second file we created.

Another related problem that does not involve file/data loss is when a
new inode is created with the name of a deleted snapshot and we fsync it:

   mkfs.btrfs -f /dev/sdc
   mount /dev/sdc /mnt
   mkdir /mnt/testdir
   btrfs subvolume snapshot /mnt /mnt/testdir/snap
   btrfs subvolume delete /mnt/testdir/snap
   rmdir /mnt/testdir
   mkdir /mnt/testdir
   xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir
   <power failure>

   The next time the fs is mounted the log replay procedure fails because
   it attempts to delete the snapshot entry (which has dir item key type
   of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry,
   resulting in the following error that causes mount to fail:

   [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
   [52174.512570] ------------[ cut here ]------------
   [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]()
   [52174.514681] BTRFS: Transaction aborted (error -2)
   [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc
   [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G        W       4.5.0-rc6-btrfs-next-27+ #1
   [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
   [52174.524053]  0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758
   [52174.524053]  0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd
   [52174.524053]  00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88
   [52174.524053] Call Trace:
   [52174.524053]  [<ffffffff81264e93>] dump_stack+0x67/0x90
   [52174.524053]  [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2
   [52174.524053]  [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs]
   [52174.524053]  [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50
   [52174.524053]  [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs]
   [52174.524053]  [<ffffffff8118f5e9>] ? iput+0xb0/0x284
   [52174.524053]  [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
   [52174.524053]  [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs]
   [52174.524053]  [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs]
   [52174.524053]  [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs]
   [52174.524053]  [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs]
   [52174.524053]  [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs]
   [52174.524053]  [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs]
   [52174.524053]  [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs]
   [52174.524053]  [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs]
   [52174.524053]  [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
   [52174.524053]  [<ffffffff8117bafa>] mount_fs+0x67/0x131
   [52174.524053]  [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
   [52174.524053]  [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs]
   [52174.524053]  [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf
   [52174.524053]  [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3
   [52174.524053]  [<ffffffff8117bafa>] mount_fs+0x67/0x131
   [52174.524053]  [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde
   [52174.524053]  [<ffffffff8119590f>] do_mount+0x8a6/0x9e8
   [52174.524053]  [<ffffffff811358dd>] ? strndup_user+0x3f/0x59
   [52174.524053]  [<ffffffff81195c65>] SyS_mount+0x77/0x9f
   [52174.524053]  [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b
   [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]---

Fix this by forcing a transaction commit when such cases happen.
This means we check in the commit root of the subvolume tree if there
was any other inode with the same reference when the inode we are
fsync'ing is a new inode (created in the current transaction).

Test cases for fstests, covering all the scenarios given above, were
submitted upstream for fstests:

  * fstests: generic test for fsync after renaming directory
    https://patchwork.kernel.org/patch/8694281/

  * fstests: generic test for fsync after renaming file
    https://patchwork.kernel.org/patch/8694301/

  * fstests: add btrfs test for fsync after snapshot deletion
    https://patchwork.kernel.org/patch/8670671/

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-04-06 17:01:44 -07:00
Adam Buchbinder
bb7ab3b92e btrfs: Fix misspellings in comments.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-14 15:05:02 +01:00
Anand Jain
ebb8765b2d btrfs: move btrfs_compression_type to compression.h
So that its better organized.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:12:46 +01:00
Filipe Manana
5e33a2bd7c Btrfs: do not collect ordered extents when logging that inode exists
When logging that an inode exists, for example as part of a directory
fsync operation, we were collecting any ordered extents for the inode but
we ended up doing nothing with them except tagging them as processed, by
setting the flag BTRFS_ORDERED_LOGGED on them, which prevented a
subsequent fsync of that inode (using the LOG_INODE_ALL mode) from
collecting and processing them. This created a time window where a second
fsync against the inode, using the fast path, ended up not logging the
checksums for the new extents but it logged the extents since they were
part of the list of modified extents. This happened because the ordered
extents were not collected and checksums were not yet added to the csum
tree - the ordered extents have not gone through btrfs_finish_ordered_io()
yet (which is where we add them to the csum tree by calling
inode.c:add_pending_csums()).

So fix this by not collecting an inode's ordered extents if we are logging
it with the LOG_INODE_EXISTS mode.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-03-01 08:23:47 -08:00
Filipe Manana
2be63d5ce9 Btrfs: fix file loss on log replay after renaming a file and fsync
We have two cases where we end up deleting a file at log replay time
when we should not. For this to happen the file must have been renamed
and a directory inode must have been fsynced/logged.

Two examples that exercise these two cases are listed below.

  Case 1)

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir -p /mnt/a/b
  $ mkdir /mnt/c
  $ touch /mnt/a/b/foo
  $ sync
  $ mv /mnt/a/b/foo /mnt/c/
  # Create file bar just to make sure the fsync on directory a/ does
  # something and it's not a no-op.
  $ touch /mnt/a/bar
  $ xfs_io -c "fsync" /mnt/a
  < power fail / crash >

  The next time the filesystem is mounted, the log replay procedure
  deletes file foo.

  Case 2)

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/a
  $ mkdir /mnt/b
  $ mkdir /mnt/c
  $ touch /mnt/a/foo
  $ ln /mnt/a/foo /mnt/b/foo_link
  $ touch /mnt/b/bar
  $ sync
  $ unlink /mnt/b/foo_link
  $ mv /mnt/b/bar /mnt/c/
  $ xfs_io -c "fsync" /mnt/a/foo
  < power fail / crash >

  The next time the filesystem is mounted, the log replay procedure
  deletes file bar.

The reason why the files are deleted is because when we log inodes
other then the fsync target inode, we ignore their last_unlink_trans
value and leave the log without enough information to later replay the
rename operations. So we need to look at the last_unlink_trans values
and fallback to a transaction commit if they are greater than the
id of the last committed transaction.

So fix this by looking at the last_unlink_trans values and fallback to
transaction commits when needed. Also, when logging other inodes (for
case 1 we logged descendants of the fsync target inode while for case 2
we logged ascendants) we need to care about concurrent tasks updating
the last_unlink_trans of inodes we are logging (which was already an
existing problem in check_parent_dirs_for_sync()). Since we can not
acquire their inode mutex (vfs' struct inode ->i_mutex), as that causes
deadlocks with other concurrent operations that acquire the i_mutex of
2 inodes (other fsyncs or renames for example), we need to serialize on
the log_mutex of the inode we are logging. A task setting a new value for
an inode's last_unlink_trans must acquire the inode's log_mutex and it
must do this update before doing the actual unlink operation (which is
already the case except when deleting a snapshot). Conversely the task
logging the inode must first log the inode and then check the inode's
last_unlink_trans value while holding its log_mutex, as if its value is
not greater then the id of the last committed transaction it means it
logged a safe state of the inode's items, while if its value is not
smaller then the id of the last committed transaction it means the inode
state it has logged might not be safe (the concurrent task might have
just updated last_unlink_trans but hasn't done yet the unlink operation)
and therefore a transaction commit must be done.

Test cases for xfstests follow in separate patches.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-03-01 08:23:29 -08:00
Filipe Manana
1ec9a1ae1e Btrfs: fix unreplayable log after snapshot delete + parent dir fsync
If we delete a snapshot, fsync its parent directory and crash/power fail
before the next transaction commit, on the next mount when we attempt to
replay the log tree of the root containing the parent directory we will
fail and prevent the filesystem from mounting, which is solvable by wiping
out the log trees with the btrfs-zero-log tool but very inconvenient as
we will lose any data and metadata fsynced before the parent directory
was fsynced.

For example:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ mkdir /mnt/testdir
  $ btrfs subvolume snapshot /mnt /mnt/testdir/snap
  $ btrfs subvolume delete /mnt/testdir/snap
  $ xfs_io -c "fsync" /mnt/testdir
  < crash / power failure and reboot >
  $ mount /dev/sdc /mnt
  mount: mount(2) failed: No such file or directory

And in dmesg/syslog we get the following message and trace:

[192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
[192066.363010] ------------[ cut here ]------------
[192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]()
[192066.367250] BTRFS: Transaction aborted (error -2)
[192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G        W       4.4.0-rc6-btrfs-next-20+ #1
[192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[192066.380889]  0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8
[192066.382561]  ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe
[192066.384191]  ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710
[192066.385827] Call Trace:
[192066.386373]  [<ffffffff81257570>] dump_stack+0x4e/0x79
[192066.387387]  [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2
[192066.388429]  [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.389236]  [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50
[192066.389884]  [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs]
[192066.390621]  [<ffffffff81184b55>] ? iput+0xb0/0x266
[192066.391200]  [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
[192066.391930]  [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs]
[192066.392715]  [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs]
[192066.393510]  [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs]
[192066.394241]  [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs]
[192066.394958]  [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs]
[192066.395628]  [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs]
[192066.396790]  [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs]
[192066.397891]  [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs]
[192066.398897]  [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs]
[192066.399823]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.400739]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.401700]  [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.402482]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.403930]  [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs]
[192066.404831]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
[192066.405726]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
[192066.406621]  [<ffffffff811714b9>] mount_fs+0x67/0x131
[192066.407401]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
[192066.408247]  [<ffffffff8118ae36>] do_mount+0x893/0x9d2
[192066.409047]  [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c
[192066.409842]  [<ffffffff8118b187>] SyS_mount+0x75/0xa1
[192066.410621]  [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b
[192066.411572] ---[ end trace 2de42126c1e0a0f0 ]---
[192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry
[192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree)
[192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30
[192066.444613] BTRFS: open_ctree failed

This happens because when we are replaying the log and processing the
directory entry pointing to the snapshot in the subvolume tree, we treat
its btrfs_dir_item item as having a location with a key type matching
BTRFS_INODE_ITEM_KEY, which is wrong because the type matches
BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the
object id refers to a root number and not to an inode in the root
containing the parent directory.

So fix this by triggering a transaction commit if an fsync against the
parent directory is requested after deleting a snapshot. This is the
simplest approach for a rare use case. Some alternative that avoids the
transaction commit would require more code to explicitly delete the
snapshot at log replay time (factoring out common code from ioctl.c:
btrfs_ioctl_snap_destroy()), special care at fsync time to remove the
log tree of the snapshot's root from the log root of the root of tree
roots, amongst other steps.

A test case for xfstests that triggers the issue follows.

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      cd /
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_dm_target flakey
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create a snapshot at the root of our filesystem (mount point path), delete it,
  # fsync the mount point path, crash and mount to replay the log. This should
  # succeed and after the filesystem is mounted the snapshot should not be visible
  # anymore.
  _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1
  _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT
  _flakey_drop_and_remount
  [ -e $SCRATCH_MNT/snap1 ] && \
      echo "Snapshot snap1 still exists after log replay"

  # Similar scenario as above, but this time the snapshot is created inside a
  # directory and not directly under the root (mount point path).
  mkdir $SCRATCH_MNT/testdir
  _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2
  _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir
  _flakey_drop_and_remount
  [ -e $SCRATCH_MNT/testdir/snap2 ] && \
      echo "Snapshot snap2 still exists after log replay"

  _unmount_flakey

  echo "Silence is golden"
  status=0
  exit

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-03-01 08:23:25 -08:00
Filipe Manana
de0ee0edb2 Btrfs: fix race between fsync and lockless direct IO writes
An fsync, using the fast path, can race with a concurrent lockless direct
IO write and end up logging a file extent item that points to an extent
that wasn't written to yet. This is because the fast fsync path collects
ordered extents into a local list and then collects all the new extent
maps to log file extent items based on them, while the direct IO write
path creates the new extent map before it creates the corresponding
ordered extent (and submitting the respective bio(s)).

So fix this by making the direct IO write path create ordered extents
before the extent maps and make the fast fsync path collect any new
ordered extents after it collects the extent maps.
Note that making the fsync handler call inode_dio_wait() (after acquiring
the inode's i_mutex) would not work and lead to a deadlock when doing
AIO, as through AIO we end up in a path where the fsync handler is called
(through dio_aio_complete_work() -> dio_complete() -> vfs_fsync_range())
before the inode's dio counter is decremented (inode_dio_wait() waits
for this counter to have a value of zero).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-01-25 16:50:26 -08:00
Filipe Manana
b06c4bf5c8 Btrfs: fix regression running delayed references when using qgroups
In the kernel 4.2 merge window we had a big changes to the implementation
of delayed references and qgroups which made the no_quota field of delayed
references not used anymore. More specifically the no_quota field is not
used anymore as of:

  commit 0ed4792af0 ("btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.")

Leaving the no_quota field actually prevents delayed references from
getting merged, which in turn cause the following BUG_ON(), at
fs/btrfs/extent-tree.c, to be hit when qgroups are enabled:

  static int run_delayed_tree_ref(...)
  {
     (...)
     BUG_ON(node->ref_mod != 1);
     (...)
  }

This happens on a scenario like the following:

  1) Ref1 bytenr X, action = BTRFS_ADD_DELAYED_REF, no_quota = 1, added.

  2) Ref2 bytenr X, action = BTRFS_DROP_DELAYED_REF, no_quota = 0, added.
     It's not merged with Ref1 because Ref1->no_quota != Ref2->no_quota.

  3) Ref3 bytenr X, action = BTRFS_ADD_DELAYED_REF, no_quota = 1, added.
     It's not merged with the reference at the tail of the list of refs
     for bytenr X because the reference at the tail, Ref2 is incompatible
     due to Ref2->no_quota != Ref3->no_quota.

  4) Ref4 bytenr X, action = BTRFS_DROP_DELAYED_REF, no_quota = 0, added.
     It's not merged with the reference at the tail of the list of refs
     for bytenr X because the reference at the tail, Ref3 is incompatible
     due to Ref3->no_quota != Ref4->no_quota.

  5) We run delayed references, trigger merging of delayed references,
     through __btrfs_run_delayed_refs() -> btrfs_merge_delayed_refs().

  6) Ref1 and Ref3 are merged as Ref1->no_quota = Ref3->no_quota and
     all other conditions are satisfied too. So Ref1 gets a ref_mod
     value of 2.

  7) Ref2 and Ref4 are merged as Ref2->no_quota = Ref4->no_quota and
     all other conditions are satisfied too. So Ref2 gets a ref_mod
     value of 2.

  8) Ref1 and Ref2 aren't merged, because they have different values
     for their no_quota field.

  9) Delayed reference Ref1 is picked for running (select_delayed_ref()
     always prefers references with an action == BTRFS_ADD_DELAYED_REF).
     So run_delayed_tree_ref() is called for Ref1 which triggers the
     BUG_ON because Ref1->red_mod != 1 (equals 2).

So fix this by removing the no_quota field, as it's not used anymore as
of commit 0ed4792af0 ("btrfs: qgroup: Switch to new extent-oriented
qgroup mechanism.").

The use of no_quota was also buggy in at least two places:

1) At delayed-refs.c:btrfs_add_delayed_tree_ref() - we were setting
   no_quota to 0 instead of 1 when the following condition was true:
   is_fstree(ref_root) || !fs_info->quota_enabled

2) At extent-tree.c:__btrfs_inc_extent_ref() - we were attempting to
   reset a node's no_quota when the condition "!is_fstree(root_objectid)
   || !root->fs_info->quota_enabled" was true but we did it only in
   an unused local stack variable, that is, we never reset the no_quota
   value in the node itself.

This fixes the remainder of problems several people have been having when
running delayed references, mostly while a balance is running in parallel,
on a 4.2+ kernel.

Very special thanks to Stéphane Lesimple for helping debugging this issue
and testing this fix on his multi terabyte filesystem (which took more
than one day to balance alone, plus fsck, etc).

Also, this fixes deadlock issue when using the clone ioctl with qgroups
enabled, as reported by Elias Probst in the mailing list. The deadlock
happens because after calling btrfs_insert_empty_item we have our path
holding a write lock on a leaf of the fs/subvol tree and then before
releasing the path we called check_ref() which did backref walking, when
qgroups are enabled, and tried to read lock the same leaf. The trace for
this case is the following:

  INFO: task systemd-nspawn:6095 blocked for more than 120 seconds.
  (...)
  Call Trace:
    [<ffffffff86999201>] schedule+0x74/0x83
    [<ffffffff863ef64c>] btrfs_tree_read_lock+0xc0/0xea
    [<ffffffff86137ed7>] ? wait_woken+0x74/0x74
    [<ffffffff8639f0a7>] btrfs_search_old_slot+0x51a/0x810
    [<ffffffff863a129b>] btrfs_next_old_leaf+0xdf/0x3ce
    [<ffffffff86413a00>] ? ulist_add_merge+0x1b/0x127
    [<ffffffff86411688>] __resolve_indirect_refs+0x62a/0x667
    [<ffffffff863ef546>] ? btrfs_clear_lock_blocking_rw+0x78/0xbe
    [<ffffffff864122d3>] find_parent_nodes+0xaf3/0xfc6
    [<ffffffff86412838>] __btrfs_find_all_roots+0x92/0xf0
    [<ffffffff864128f2>] btrfs_find_all_roots+0x45/0x65
    [<ffffffff8639a75b>] ? btrfs_get_tree_mod_seq+0x2b/0x88
    [<ffffffff863e852e>] check_ref+0x64/0xc4
    [<ffffffff863e9e01>] btrfs_clone+0x66e/0xb5d
    [<ffffffff863ea77f>] btrfs_ioctl_clone+0x48f/0x5bb
    [<ffffffff86048a68>] ? native_sched_clock+0x28/0x77
    [<ffffffff863ed9b0>] btrfs_ioctl+0xabc/0x25cb
  (...)

The problem goes away by eleminating check_ref(), which no longer is
needed as its purpose was to get a value for the no_quota field of
a delayed reference (this patch removes the no_quota field as mentioned
earlier).

Reported-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Tested-by: Stéphane Lesimple <stephane_btrfs@lesimple.fr>
Reported-by: Elias Probst <mail@eliasprobst.eu>
Reported-by: Peter Becker <floyd.net@gmail.com>
Reported-by: Malte Schröder <malte@tnxip.de>
Reported-by: Derek Dongray <derek@valedon.co.uk>
Reported-by: Erkki Seppala <flux-btrfs@inside.org>
Cc: stable@vger.kernel.org  # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
2015-10-25 19:53:26 +00:00
Chris Mason
6db4a7335d Merge branch 'fix/waitqueue-barriers' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.4 2015-10-12 16:24:40 -07:00
David Sterba
779adf0f64 btrfs: remove extra barrier before waitqueue_active
Removing barriers is scary, but a call to atomic_dec_and_test implies
a barrier, so we don't need to issue another one.

Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-10 18:40:33 +02:00
David Sterba
33a9eca7e4 btrfs: comment waitqueue_active implied by locks
Suggested-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-10 18:35:10 +02:00
Anand Jain
a4553fefb5 Btrfs: consolidate btrfs_error() to btrfs_std_error()
btrfs_error() and btrfs_std_error() does the same thing
and calls _btrfs_std_error(), so consolidate them together.
And the main motivation is that btrfs_error() is closely
named with btrfs_err(), one handles error action the other
is to log the error, so don't closely name them.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: David Sterba <dsterba@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29 16:30:00 +02:00
Filipe Manana
b84b8390d6 Btrfs: fix file read corruption after extent cloning and fsync
If we partially clone one extent of a file into a lower offset of the
file, fsync the file, power fail and then mount the fs to trigger log
replay, we can get multiple checksum items in the csum tree that overlap
each other and result in checksum lookup failures later. Those failures
can make file data read requests assume a checksum value of 0, but they
will not return an error (-EIO for example) to userspace exactly because
the expected checksum value 0 is a special value that makes the read bio
endio callback return success and set all the bytes of the corresponding
page with the value 0x01 (at fs/btrfs/inode.c:__readpage_endio_check()).
From a userspace perspective this is equivalent to file corruption
because we are not returning what was written to the file.

Details about how this can happen, and why, are included inline in the
following reproducer test case for fstests and the comment added to
tree-log.c.

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_dm_flakey
  _require_cloner
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test file with a single 100K extent starting at file
  # offset 800K. We fsync the file here to make the fsync log tree gets
  # a single csum item that covers the whole 100K extent, which causes
  # the second fsync, done after the cloning operation below, to not
  # leave in the log tree two csum items covering two sub-ranges
  # ([0, 20K[ and [20K, 100K[)) of our extent.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 800K 100K"  \
                  -c "fsync"                     \
                   $SCRATCH_MNT/foo | _filter_xfs_io

  # Now clone part of our extent into file offset 400K. This adds a file
  # extent item to our inode's metadata that points to the 100K extent
  # we created before, using a data offset of 20K and a data length of
  # 20K, so that it refers to the sub-range [20K, 40K[ of our original
  # extent.
  $CLONER_PROG -s $((800 * 1024 + 20 * 1024)) -d $((400 * 1024)) \
      -l $((20 * 1024)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo

  # Now fsync our file to make sure the extent cloning is durably
  # persisted. This fsync will not add a second csum item to the log
  # tree containing the checksums for the blocks in the sub-range
  # [20K, 40K[ of our extent, because there was already a csum item in
  # the log tree covering the whole extent, added by the first fsync
  # we did before.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  echo "File digest before power failure:"
  md5sum $SCRATCH_MNT/foo | _filter_scratch

  # Silently drop all writes and ummount to simulate a crash/power
  # failure.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again, mount to trigger log replay and validate file
  # contents.
  # The fsync log replay first processes the file extent item
  # corresponding to the file offset 400K (the one which refers to the
  # [20K, 40K[ sub-range of our 100K extent) and then processes the file
  # extent item for file offset 800K. It used to happen that when
  # processing the later, it erroneously left in the csum tree 2 csum
  # items that overlapped each other, 1 for the sub-range [20K, 40K[ and
  # 1 for the whole range of our extent. This introduced a problem where
  # subsequent lookups for the checksums of blocks within the range
  # [40K, 100K[ of our extent would not find anything because lookups in
  # the csum tree ended up looking only at the smaller csum item, the
  # one covering the subrange [20K, 40K[. This made read requests assume
  # an expected checksum with a value of 0 for those blocks, which caused
  # checksum verification failure when the read operations finished.
  # However those checksum failure did not result in read requests
  # returning an error to user space (like -EIO for e.g.) because the
  # expected checksum value had the special value 0, and in that case
  # btrfs set all bytes of the corresponding pages with the value 0x01
  # and produce the following warning in dmesg/syslog:
  #
  #  "BTRFS warning (device dm-0): csum failed ino 257 off 917504 csum\
  #   1322675045 expected csum 0"
  #
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  echo "File digest after log replay:"
  # Must match the same digest he had after cloning the extent and
  # before the power failure happened.
  md5sum $SCRATCH_MNT/foo | _filter_scratch

  _unmount_flakey

  status=0
  exit

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-19 14:27:46 -07:00
Zhaolei
60d53eb310 btrfs: Remove unused arguments in tree-log.c
Following arguments are not used in tree-log.c:
 insert_one_name(): path, type
 wait_log_commit(): trans
 wait_for_writer(): trans

This patch remove them.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-19 14:25:15 -07:00
Zhaolei
34eb2a5249 btrfs: Remove useless condition in start_log_trans()
Dan Carpenter <dan.carpenter@oracle.com> reported a smatch warning
for start_log_trans():
 fs/btrfs/tree-log.c:178 start_log_trans()
 warn: we tested 'root->log_root' before and it was 'false'

 fs/btrfs/tree-log.c
 147          if (root->log_root) {
 We test "root->log_root" here.
 ...

Reason:
 Condition of:
 fs/btrfs/tree-log.c:178: if (!root->log_root) {
 is not necessary after commit: 7237f1833

 It caused a smatch warning, and no functionally error.

Fix:
 Deleting above condition will make smatch shut up,
 but a better way is to do cleanup for start_log_trans()
 to remove duplicated code and make code more readable.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-19 14:24:49 -07:00
Filipe Manana
18aa092297 Btrfs: fix stale dir entries after removing a link and fsync
We have one more case where after a log tree is replayed we get
inconsistent metadata leading to stale directory entries, due to
some directories having entries pointing to some inode while the
inode does not have a matching BTRFS_INODE_[REF|EXTREF]_KEY item.

To trigger the problem we need to have a file with multiple hard links
belonging to different parent directories. Then if one of those hard
links is removed and we fsync the file using one of its other links
that belongs to a different parent directory, we end up not logging
the fact that the removed hard link doesn't exists anymore in the
parent directory.

Simple reproducer:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs generic
  _supported_os Linux
  _require_scratch
  _require_dm_flakey
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test directory and file.
  mkdir $SCRATCH_MNT/testdir
  touch $SCRATCH_MNT/foo
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo2
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/testdir/foo3

  # Make sure everything done so far is durably persisted.
  sync

  # Now we remove one of our file's hardlinks in the directory testdir.
  unlink $SCRATCH_MNT/testdir/foo3

  # We now fsync our file using the "foo" link, which has a parent that
  # is not the directory "testdir".
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Silently drop all writes and unmount to simulate a crash/power
  # failure.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again, mount to trigger journal/log replay.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After the journal/log is replayed we expect to not see the "foo3"
  # link anymore and we should be able to remove all names in the
  # directory "testdir" and then remove it (no stale directory entries
  # left after the journal/log replay).
  echo "Entries in testdir:"
  ls -1 $SCRATCH_MNT/testdir

  rm -f $SCRATCH_MNT/testdir/*
  rmdir $SCRATCH_MNT/testdir

  _unmount_flakey

  status=0
  exit

The test fails with:

  $ ./check generic/107
  FSTYP         -- btrfs
  PLATFORM      -- Linux/x86_64 debian3 4.1.0-rc6-btrfs-next-11+
  MKFS_OPTIONS  -- /dev/sdc
  MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1

  generic/107 3s ... - output mismatch (see .../results/generic/107.out.bad)
    --- tests/generic/107.out	2015-08-01 01:39:45.807462161 +0100
    +++ /home/fdmanana/git/hub/xfstests/results//generic/107.out.bad
    @@ -1,3 +1,5 @@
     QA output created by 107
     Entries in testdir:
     foo2
    +foo3
    +rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
    ...
    _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent \
      (see /home/fdmanana/git/hub/xfstests/results//generic/107.full)
    _check_dmesg: something found in dmesg (see .../results/generic/107.dmesg)
  Ran: generic/107
  Failures: generic/107
  Failed 1 of 1 tests

  $ cat /home/fdmanana/git/hub/xfstests/results//generic/107.full
  (...)
  checking fs roots
  root 5 inode 257 errors 200, dir isize wrong
	unresolved ref dir 257 index 3 namelen 4 name foo3 filetype 1 errors 5, no dir item, no inode ref
  (...)

And produces the following warning in dmesg:

  [127298.759064] BTRFS info (device dm-0): failed to delete reference to foo3, inode 258 parent 257
  [127298.762081] ------------[ cut here ]------------
  [127298.763311] WARNING: CPU: 10 PID: 7891 at fs/btrfs/inode.c:3956 __btrfs_unlink_inode+0x182/0x35a [btrfs]()
  [127298.767327] BTRFS: Transaction aborted (error -2)
  (...)
  [127298.788611] Call Trace:
  [127298.789137]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [127298.790090]  [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
  [127298.791157]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [127298.792323]  [<ffffffffa065ad09>] ? __btrfs_unlink_inode+0x182/0x35a [btrfs]
  [127298.793633]  [<ffffffff8104b410>] warn_slowpath_fmt+0x46/0x48
  [127298.794699]  [<ffffffffa065ad09>] __btrfs_unlink_inode+0x182/0x35a [btrfs]
  [127298.797640]  [<ffffffffa065be8f>] btrfs_unlink_inode+0x1e/0x40 [btrfs]
  [127298.798876]  [<ffffffffa065bf11>] btrfs_unlink+0x60/0x9b [btrfs]
  [127298.800154]  [<ffffffff8116fb48>] vfs_unlink+0x9c/0xed
  [127298.801303]  [<ffffffff81173481>] do_unlinkat+0x12b/0x1fb
  [127298.802450]  [<ffffffff81253855>] ? lockdep_sys_exit_thunk+0x12/0x14
  [127298.803797]  [<ffffffff81174056>] SyS_unlinkat+0x29/0x2b
  [127298.805017]  [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
  [127298.806310] ---[ end trace bbfddacb7aaada7b ]---
  [127298.807325] BTRFS warning (device dm-0): __btrfs_unlink_inode:3956: Aborting unused transaction(No such entry).

So fix this by logging all parent inodes, current and old ones, to make
sure we do not get stale entries after log replay. This is not a simple
solution such as triggering a full transaction commit because it would
imply full transaction commit when an inode is fsynced in the same
transaction that modified it and reloaded it after eviction (because its
last_unlink_trans is set to the same value as its last_trans as of the
commit with the title "Btrfs: fix stale dir entries after unlink, inode
eviction and fsync"), and it would also make fstest generic/066 fail
since one of the fsyncs triggers a full commit and the next fsync will
not find the inode in the log anymore (therefore not removing the xattr).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 06:17:04 -07:00
Filipe Manana
bb53eda902 Btrfs: fix stale directory entries after fsync log replay
We have another case where after an fsync log replay we get an inode with
a wrong link count (smaller than it should be) and a number of directory
entries greater than its link count. This happens when we add a new link
hard link to our inode A and then we fsync some other inode B that has
the side effect of logging the parent directory inode too. In this case
at log replay time we add the new hard link to our inode (the item with
key BTRFS_INODE_REF_KEY) when processing the parent directory but we
never adjust the link count of our inode A. As a result we get stale dir
entries for our inode A that can never be deleted and therefore it makes
it impossible to remove the parent directory (as its i_size can never
decrease back to 0).

A simple reproducer for fstests that triggers this issue:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _need_to_be_root
  _supported_fs generic
  _supported_os Linux
  _require_scratch
  _require_dm_flakey
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test directory and files.
  mkdir $SCRATCH_MNT/testdir
  touch $SCRATCH_MNT/testdir/foo
  touch $SCRATCH_MNT/testdir/bar

  # Make sure everything done so far is durably persisted.
  sync

  # Create one hard link for file foo and another one for file bar. After
  # that fsync only the file bar.
  ln $SCRATCH_MNT/testdir/bar $SCRATCH_MNT/testdir/bar_link
  ln $SCRATCH_MNT/testdir/foo $SCRATCH_MNT/testdir/foo_link
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir/bar

  # Silently drop all writes on scratch device to simulate power failure.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again and mount the fs to trigger log/journal replay.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # Now verify both our files have a link count of 2.
  echo "Link count for file foo: $(stat --format=%h $SCRATCH_MNT/testdir/foo)"
  echo "Link count for file bar: $(stat --format=%h $SCRATCH_MNT/testdir/bar)"

  # We should be able to remove all the links of our files in testdir, and
  # after that the parent directory should become empty and therefore
  # possible to remove it.
  rm -f $SCRATCH_MNT/testdir/*
  rmdir $SCRATCH_MNT/testdir

  _unmount_flakey

  # The fstests framework will call fsck against our filesystem which will verify
  # that all metadata is in a consistent state.

  status=0
  exit

The test fails with:

 -Link count for file foo: 2
 +Link count for file foo: 1
  Link count for file bar: 2
 +rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/testdir/foo_link': Stale file handle
 +rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/testdir': Directory not empty
 (...)
 _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent

And fsck's output:

  (...)
  checking fs roots
  root 5 inode 258 errors 2001, no inode item, link count wrong
      unresolved ref dir 257 index 5 namelen 8 name foo_link filetype 1 errors 4, no inode ref
  Checking filesystem on /dev/sdc
  (...)

So fix this by marking inodes for link count fixup at log replay time
whenever a directory entry is replayed if the entry was created in the
transaction where the fsync was made and if it points to a non-directory
inode.

This isn't a new problem/regression, the issue exists for a long time,
possibly since the log tree feature was added (2008).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 06:16:56 -07:00
Filipe Manana
a89ca6f24f Btrfs: fix fsync after truncate when no_holes feature is enabled
When we have the no_holes feature enabled, if a we truncate a file to a
smaller size, truncate it again but to a size greater than or equals to
its original size and fsync it, the log tree will not have any information
about the hole covering the range [truncate_1_offset, new_file_size[.
Which means if the fsync log is replayed, the file will remain with the
state it had before both truncate operations.

Without the no_holes feature this does not happen, since when the inode
is logged (full sync flag is set) it will find in the fs/subvol tree a
leaf with a generation matching the current transaction id that has an
explicit extent item representing the hole.

Fix this by adding an explicit extent item representing a hole between
the last extent and the inode's i_size if we are doing a full sync.

The issue is easy to reproduce with the following test case for fstests:

  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  _need_to_be_root
  _supported_fs generic
  _supported_os Linux
  _require_scratch
  _require_dm_flakey

  # This test was motivated by an issue found in btrfs when the btrfs
  # no-holes feature is enabled (introduced in kernel 3.14). So enable
  # the feature if the fs being tested is btrfs.
  if [ $FSTYP == "btrfs" ]; then
      _require_btrfs_fs_feature "no_holes"
      _require_btrfs_mkfs_feature "no-holes"
      MKFS_OPTIONS="$MKFS_OPTIONS -O no-holes"
  fi

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test files and make sure everything is durably persisted.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 64K"         \
                  -c "pwrite -S 0xbb 64K 61K"       \
                  $SCRATCH_MNT/foo | _filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0xee 0 64K"         \
                  -c "pwrite -S 0xff 64K 61K"       \
                  $SCRATCH_MNT/bar | _filter_xfs_io
  sync

  # Now truncate our file foo to a smaller size (64Kb) and then truncate
  # it to the size it had before the shrinking truncate (125Kb). Then
  # fsync our file. If a power failure happens after the fsync, we expect
  # our file to have a size of 125Kb, with the first 64Kb of data having
  # the value 0xaa and the second 61Kb of data having the value 0x00.
  $XFS_IO_PROG -c "truncate 64K" \
               -c "truncate 125K" \
               -c "fsync" \
               $SCRATCH_MNT/foo

  # Do something similar to our file bar, but the first truncation sets
  # the file size to 0 and the second truncation expands the size to the
  # double of what it was initially.
  $XFS_IO_PROG -c "truncate 0" \
               -c "truncate 253K" \
               -c "fsync" \
               $SCRATCH_MNT/bar

  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again, mount to trigger log replay and validate file
  # contents.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # We expect foo to have a size of 125Kb, the first 64Kb of data all
  # having the value 0xaa and the remaining 61Kb to be a hole (all bytes
  # with value 0x00).
  echo "File foo content after log replay:"
  od -t x1 $SCRATCH_MNT/foo

  # We expect bar to have a size of 253Kb and no extents (any byte read
  # from bar has the value 0x00).
  echo "File bar content after log replay:"
  od -t x1 $SCRATCH_MNT/bar

  status=0
  exit

The expected file contents in the golden output are:

  File foo content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0200000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0372000
  File bar content after log replay:
  0000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0772000

Without this fix, their contents are:

  File foo content after log replay:
  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0372000
  File bar content after log replay:
  0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
  *
  0200000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  *
  0372000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0772000

A test case submission for fstests follows soon.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-07-01 17:17:12 -07:00
Filipe Manana
36283bf777 Btrfs: fix fsync xattr loss in the fast fsync path
After commit 4f764e5153 ("Btrfs: remove deleted xattrs on fsync log
replay"), we can end up in a situation where during log replay we end up
deleting xattrs that were never deleted when their file was last fsynced.

This happens in the fast fsync path (flag BTRFS_INODE_NEEDS_FULL_SYNC is
not set in the inode) if the inode has the flag BTRFS_INODE_COPY_EVERYTHING
set, the xattr was added in a past transaction and the leaf where the
xattr is located was not updated (COWed or created) in the current
transaction. In this scenario the xattr item never ends up in the log
tree and therefore at log replay time, which makes the replay code delete
the xattr from the fs/subvol tree as it thinks that xattr was deleted
prior to the last fsync.

Fix this by always logging all xattrs, which is the simplest and most
reliable way to detect deleted xattrs and replay the deletes at log replay
time.

This issue is reproducible with the following test case for fstests:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"

  here=`pwd`
  tmp=/tmp/$$
  status=1	# failure is the default!

  _cleanup()
  {
      _cleanup_flakey
      rm -f $tmp.*
  }
  trap "_cleanup; exit \$status" 0 1 2 3 15

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey
  . ./common/attr

  # real QA test starts here

  # We create a lot of xattrs for a single file. Only btrfs and xfs are currently
  # able to store such a large mount of xattrs per file, other filesystems such
  # as ext3/4 and f2fs for example, fail with ENOSPC even if we attempt to add
  # less than 1000 xattrs with very small values.
  _supported_fs btrfs xfs
  _supported_os Linux
  _need_to_be_root
  _require_scratch
  _require_dm_flakey
  _require_attrs
  _require_metadata_journaling $SCRATCH_DEV

  rm -f $seqres.full

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create the test file with some initial data and make sure everything is
  # durably persisted.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" $SCRATCH_MNT/foo | _filter_xfs_io
  sync

  # Add many small xattrs to our file.
  # We create such a large amount because it's needed to trigger the issue found
  # in btrfs - we need to have an amount that causes the fs to have at least 3
  # btree leafs with xattrs stored in them, and it must work on any leaf size
  # (maximum leaf/node size is 64Kb).
  num_xattrs=2000
  for ((i = 1; i <= $num_xattrs; i++)); do
      name="user.attr_$(printf "%04d" $i)"
      $SETFATTR_PROG -n $name -v "val_$(printf "%04d" $i)" $SCRATCH_MNT/foo
  done

  # Sync the filesystem to force a commit of the current btrfs transaction, this
  # is a necessary condition to trigger the bug on btrfs.
  sync

  # Now update our file's data and fsync the file.
  # After a successful fsync, if the fsync log/journal is replayed we expect to
  # see all the xattrs we added before with the same values (and the updated file
  # data of course). Btrfs used to delete some of these xattrs when it replayed
  # its fsync log/journal.
  $XFS_IO_PROG -c "pwrite -S 0xbb 8K 16K" \
               -c "fsync" \
               $SCRATCH_MNT/foo | _filter_xfs_io

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  # Allow writes again and mount. This makes the fs replay its fsync log.
  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  echo "File content after crash and log replay:"
  od -t x1 $SCRATCH_MNT/foo

  echo "File xattrs after crash and log replay:"
  for ((i = 1; i <= $num_xattrs; i++)); do
      name="user.attr_$(printf "%04d" $i)"
      echo -n "$name="
      $GETFATTR_PROG --absolute-names -n $name --only-values $SCRATCH_MNT/foo
      echo
  done

  status=0
  exit

The golden output expects all xattrs to be available, and with the correct
values, after the fsync log is replayed.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-06-30 14:36:47 -07:00
Filipe Manana
e4545de5b0 Btrfs: fix fsync data loss after append write
If we do an append write to a file (which increases its inode's i_size)
that does not have the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode,
and the previous transaction added a new hard link to the file, which sets
the flag BTRFS_INODE_COPY_EVERYTHING in the file's inode, and then fsync
the file, the inode's new i_size isn't logged. This has the consequence
that after the fsync log is replayed, the file size remains what it was
before the append write operation, which means users/applications will
not be able to read the data that was successsfully fsync'ed before.

This happens because neither the inode item nor the delayed inode get
their i_size updated when the append write is made - doing so would
require starting a transaction in the buffered write path, something that
we do not do intentionally for performance reasons.

Fix this by making sure that when the flag BTRFS_INODE_COPY_EVERYTHING is
set the inode is logged with its current i_size (log the in-memory inode
into the log tree).

This issue is not a recent regression and is easy to reproduce with the
following test case for fstests:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"

  here=`pwd`
  tmp=/tmp/$$
  status=1	# failure is the default!

  _cleanup()
  {
          _cleanup_flakey
          rm -f $tmp.*
  }
  trap "_cleanup; exit \$status" 0 1 2 3 15

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter
  . ./common/dmflakey

  # real QA test starts here
  _supported_fs generic
  _supported_os Linux
  _need_to_be_root
  _require_scratch
  _require_dm_flakey
  _require_metadata_journaling $SCRATCH_DEV

  _crash_and_mount()
  {
          # Simulate a crash/power loss.
          _load_flakey_table $FLAKEY_DROP_WRITES
          _unmount_flakey
          # Allow writes again and mount. This makes the fs replay its fsync log.
          _load_flakey_table $FLAKEY_ALLOW_WRITES
          _mount_flakey
  }

  rm -f $seqres.full

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create the test file with some initial data and then fsync it.
  # The fsync here is only needed to trigger the issue in btrfs, as it causes the
  # the flag BTRFS_INODE_NEEDS_FULL_SYNC to be removed from the btrfs inode.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 32k" \
                  -c "fsync" \
                  $SCRATCH_MNT/foo | _filter_xfs_io
  sync

  # Add a hard link to our file.
  # On btrfs this sets the flag BTRFS_INODE_COPY_EVERYTHING on the btrfs inode,
  # which is a necessary condition to trigger the issue.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/bar

  # Sync the filesystem to force a commit of the current btrfs transaction, this
  # is a necessary condition to trigger the bug on btrfs.
  sync

  # Now append more data to our file, increasing its size, and fsync the file.
  # In btrfs because the inode flag BTRFS_INODE_COPY_EVERYTHING was set and the
  # write path did not update the inode item in the btree nor the delayed inode
  # item (in memory struture) in the current transaction (created by the fsync
  # handler), the fsync did not record the inode's new i_size in the fsync
  # log/journal. This made the data unavailable after the fsync log/journal is
  # replayed.
  $XFS_IO_PROG -c "pwrite -S 0xbb 32K 32K" \
               -c "fsync" \
               $SCRATCH_MNT/foo | _filter_xfs_io

  echo "File content after fsync and before crash:"
  od -t x1 $SCRATCH_MNT/foo

  _crash_and_mount

  echo "File content after crash and log replay:"
  od -t x1 $SCRATCH_MNT/foo

  status=0
  exit

The expected file output before and after the crash/power failure expects the
appended data to be available, which is:

  0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
  *
  0100000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
  *
  0200000

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-06-30 14:36:47 -07:00
Liu Bo
0c304304fe Btrfs: remove csum_bytes_left
After commit 8407f55326
("Btrfs: fix data corruption after fast fsync and writeback error"),
during wait_ordered_extents(), we wait for ordered extent setting
BTRFS_ORDERED_IO_DONE or BTRFS_ORDERED_IOERR, at which point we've
already got checksum information, so we don't need to check
(csum_bytes_left == 0) in the whole logging path.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-06-03 04:03:06 -07:00
Linus Torvalds
9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00