This patch adds support for the PCI-8604PW card equipped with four 878A.
It is unknown who the manufacturer of this card is and no drivers were
available during development of the patch. According to images found
online, the card is originally sold with Linux DVR software.
A CPLD on the card prevents the 878A from requesting access to the
bus until an initialization sequence has been issued via GPIOs. The
implemented sequence uses the minimum number of GPIOs needed to
successfully unlock bus access. As there are many more GPIOs connected
to the CPLD, it is very likely that some of the others have an influence
on the bus arbitration scheduling. This should be investigated further
in case of performance issues.
The tested card contains an EEPROM on one of the 878A, but it is
completely empty (i.e. contains only 0xff), so it is not possible
to detect the card.
Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net>
Tested-by: Robert Longbottom <rongblor@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
In core_init make sure access to EDID DDC lines are disabled
before chip is powered up. Also DISABLE_AUTO_EDID before power up.
The correct setting is applied later when setting the EDID.
Some sources (MAC) kept on reading EDID even when Hotplug was low
and in the short period in core_init before the DDC lines was enabled
read a corrupt EDID.
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This was the reason for enabling the HDMI/DVI-D mode irq in the first place.
Signed-off-by: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Fix the use of __user in the check_array_args() prototype: instead of
using 'void * __user *' you should use 'void __user **' for sparse to
understand this correctly.
This also required the use of __force in the '*kernel_ptr = user_ptr'
assignment.
Also replace a wrong cast (void *) with the correct one (void **)
in check_array_args().
This fixes these sparse warnings:
drivers/media/v4l2-core/v4l2-ioctl.c:2284:35: warning: incorrect type in assignment (different address spaces)
drivers/media/v4l2-core/v4l2-ioctl.c:2301:35: warning: incorrect type in assignment (different address spaces)
drivers/media/v4l2-core/v4l2-ioctl.c:2319:35: warning: incorrect type in assignment (different address spaces)
drivers/media/v4l2-core/v4l2-ioctl.c:2386:57: warning: incorrect type in argument 4 (different address spaces)
drivers/media/v4l2-core/v4l2-ioctl.c:2420:29: warning: incorrect type in assignment (different address spaces)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sparse generated a bunch of errors like this:
drivers/media/v4l2-core/videobuf2-core.c:2045:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:136:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:151:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:168:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:183:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:185:9: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:385:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1115:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1268:33: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1270:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1315:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1324:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1396:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1457:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1482:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1484:9: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1523:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1525:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1815:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1828:17: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1914:25: error: incompatible types in conditional expression (different base types)
drivers/media/v4l2-core/videobuf2-core.c:1944:9: error: incompatible types in conditional expression (different base types)
These are caused by the call*op defines which do something like this:
(ops->op) ? ops->op(args) : 0
which is OK as long as op is not a void function, because in that case one part
of the conditional expression returns void, the other an integer. Hence the sparse
errors.
I've replaced this by introducing three variants of the call_ macros:
call_*op for int returns, call_void_*op for void returns and call_ptr_*op for
pointer returns.
That's the bad news. The good news is that the fail_*op macros could be removed
since the call_*op macros now have enough information to determine if the op
succeeded or not and can increment the op counter only on success. This at least
makes it more robust w.r.t. future changes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch does not modify existing drivers. It adds subdriver
to gspca for DTCS033 (Scopium) webcam for astrophotography.
The patch adds dtcs033.c and modifies Kconfig and Makefile.
Signed-off-by: Robert Butora <robert.butora.fi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The sn9c102 driver is deprecated. It was moved to staging in
anticipation of its removal in a future kernel version. However, USB
devices 0C45:6024 and 0C45:6025 are still handled by sn9c102 when
both sn9c102 and gspca_sonixb are enabled.
We must migrate all the users of these devices to the gspca_sonixb
driver now, so that it gets sufficient testing before the sn9c102
driver is finally phased out.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
from commit-id: b3379c6201
"vb2: only call start_streaming if sufficient buffers are queued"
the vb2 framework warns on (WARN_ON()) if all the active buffers
are not released when streaming is stopped, initially the vb2 silently
released the buffer internally if the buffer was not released by
the driver.
This patch fixes following issue:
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218)
[<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230)
[<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a1 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224)
[<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218)
[<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230)
[<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a2 ]---
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
from commit-id: b3379c6201
"vb2: only call start_streaming if sufficient buffers are queued"
the vb2 framework warns on (WARN_ON()) if all the active buffers
are not released when streaming is stopped, initially the vb2 silently
released the buffer internally if the buffer was not released by
the driver.
Also this patch moves the disabling of interrupts from relase() callback
to stop_streaming() callback as which needs to be done ideally.
This patch fixes following issue:
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218)
[<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230)
[<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a1 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224)
[<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218)
[<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230)
[<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a2 ]---
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
from commit-id: b3379c6201
"vb2: only call start_streaming if sufficient buffers are queued"
the vb2 framework warns on (WARN_ON()) if all the active buffers
are not released when streaming is stopped, initially the vb2 silently
released the buffer internally if the buffer was not released by
the driver.
Also this patch moves the disabling of interrupts from relase() callback
to stop_streaming() callback as which needs to be done ideally.
This patch fixes following issue:
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218)
[<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230)
[<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a1 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224()
Modules linked in:
CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89
[<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14)
[<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88)
[<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24)
[<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224)
[<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218)
[<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24)
[<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230)
[<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74)
[<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224)
[<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0)
[<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918)
[<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc)
[<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc)
[<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0)
[<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4)
[<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20)
---[ end trace 5faa75e8c2f8a6a2 ]---
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
All YUV 422 has 16bit per pixels.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This fixes following build error:
CC drivers/media/i2c/s5c73m3/s5c73m3-core.o
CC drivers/md/dm-ioctl.o
CC net/ipv4/inet_lro.o
drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘s5c73m3_get_platform_data’:
drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:2: error: implicit declaration of function ‘v4l2_of_get_next_endpoint’ [-Werror=implicit-function-declaration]
drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:10: warning: assignment makes pointer from integer without a cast [enabled by default]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It printed a little bit too heavy looking error log "DVB: Unable to
find symbol rtl2832_sdr_attach()" when staging module was disabled.
Silence that error by introducing own version of dvb_attach() macro
without the error logging.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
RTL2832 SDR extension module is currently on staging. SDR module
headers were included from staging causing direct dependency staging
directory. As a solution, add needed headers to main driver.
Motivation of that change comes from Luis / driver backports project.
Reported-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Cc: backports@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
As reported by Coverity, there's a potential risk of a division
by zero on some calls to jpeg_set_qual(), if quality is zero.
As quality can't be 0 or lower than that, adds an extra clause
to cover this special case.
Coverity reports: CID#11922280, CID#11922293, CID#11922295
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The dequed CAPTURE_MPLANE type buffers don't contain the flags that the
originally queued OUTPUT_MPLANE type buffers have. This breaks compliance.
Copy the source v4l2_buffer flags to the destination v4l2_buffer flags before
they are dequed.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The vpe driver wasn't setting the correct field parameter for dequed CAPTURE
type buffers for the case where the captured output is progressive.
Set the field to V4L2_FIELD_NONE for the completed destination buffers when
the captured output is progressive.
For OUTPUT type buffers, a queued buffer's field is forced to V4L2_FIELD_NONE
if the pixel format(configured through s_fmt for the buffer type
V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE specifies) the field type isn't interlaced.
If the pixel format specified was V4L2_FIELD_ALTERNATE, and the queued buffer's
field isn't V4L2_FIELD_TOP or V4L2_FIELD_BOTTOM, the vb2 buf_prepare op returns
an error.
This ensures compliance, and that the dequeued output and captured buffers
contain the field type that the driver used internally.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Zero out the reserved formats in v4l2_pix_format_mplane and
v4l2_plane_pix_format members of the returned v4l2_format pointer when passed
through TRY_FMT ioctl.
This ensures that the user doesn't interpret the non-zero fields as some data
passed by the driver, and ensures compliance.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The vpe output and capture queues are initially configured to default values in
vpe_open(). A G_FMT before any S_FMTs will result in these values being
populated.
The colorspace and bytesperline parameter of this initial configuration are
incorrect. This breaks compliance when as we get 'TRY_FMT(G_FMT) != G_FMT'.
Fix the initial queue configuration such that it wouldn't need to be fixed by
try_fmt.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The bus_info parameter in v4l2_capabilities expects a 'platform_' prefix. This
wasn't done in the driver and hence was breaking compliance. Update the bus_info
parameter accordingly.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
querycap currently returns V4L2_CAP_VIDEO_M2M as a capability, this should be
V4L2_CAP_VIDEO_M2M_MPLANE instead, as the driver supports multiplanar formats.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The minimum width and height for VPE input/output was kept as 128 pixels. VPE
doesn't have a constraint on the image height, it requires the image width to
be at least 16 bytes.
Change the minimum supported dimensions to 32x32. This allows us to de-interlace
qcif content. A smaller image size than 32x32 didn't make much sense, so stopped
at this.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The video_device struct is currently embedded in the driver data struct vpe_dev.
A vpe_dev instance is allocated by the driver, and the memory for the vfd is a
part of this struct.
The v4l2 core, however, manages the removal of the vfd region, through the
video_device's .release() op, which currently is the helper
video_device_release. This causes memory corruption, and leads to issues when
we try to re-insert the vpe module.
Use the video_device_release_empty helper function instead.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
VPE has a ctrl parameter which decides how many mem to mem transactions the
active job from the job queue can perform.
The driver's job_ready() made sure that the number of ready source buffers are
sufficient for the job to execute successfully. But it didn't make sure if
there are sufficient ready destination buffers in the capture queue for the
VPE output.
If the time taken by VPE to process a single frame is really slow, then it's
possible that we don't need to imply such a restriction on the dst queue, but
really fast transactions(small resolution, no de-interlacing) may cause us to
hit the condition where we don't have any free buffers for the VPE to write on.
Add the extra check in job_ready() to make sure we have the sufficient amount
of destination buffers.
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add sleep ops to lgdt3304_ops to invoke lgdt3305_sleep() to be called
from dvb_frontend_suspend(). lgdt3305_soft_reset() is called for both
3304 and 3305 devices. soft_reset and sleep touch LGDT3305_GEN_CTRL_3
on 3304 and 3305 devices. Hence, adding sleep to lgdt3304_ops will help
suspend 3304 properly from dvb_frontend_suspend().
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The Kconfig entry for "Micronas DRX-J demodulator" defaults to modular
if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with
MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate
the logic, because MEDIA_SUBDRV_AUTOSELECT's logic is the opposite of
the former logic.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
fix the following warnings:
m88rs2000.c:300:16: warning: symbol 'm88rs2000_setup' was not declared. Should it be static?
m88rs2000.c:318:16: warning: symbol 'm88rs2000_shutdown' was not declared. Should it be static?
m88rs2000.c:328:16: warning: symbol 'fe_reset' was not declared. Should it be static?
m88rs2000.c:366:16: warning: symbol 'fe_trigger' was not declared. Should it be static?
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Correct the initialization values at the start of the function
and use proper variable sizes to prevent overflow.
Signed-off-by: Benjamin Larsson <benjamin@southpole.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The generic scancode filtering has questionable value and makes it
impossible to determine from userspace if there is an actual
scancode hw filter present or not.
So revert the generic parts.
Based on a patch from James Hogan <james.hogan@imgtec.com>, but this
version also makes sure that only the valid sysfs files are created
in the first place.
Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Overloading dev->s_filter to do two different functions (set wakeup filters
and generic hardware filters) makes it impossible to tell what the
hardware actually supports, so create a separate dev->s_wakeup_filter and
make the distinction explicit.
Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This reverts 18bc174481 and changes
the code at img-ir-nec.c to use the order used by the other NEC decoders.
The original patch ignored the fact that NEC32 scancodes are generated not
only in the NEC raw decoder but also directly in some drivers. Whichever
approach is chosen it should be consistent across drivers and this patch
needs more discussion.
Furthermore, I'm convinced that we have to stop playing games trying to
decipher the "meaning" of NEC scancodes (what's the customer/vendor/address,
which byte is the MSB, etc).
Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Coverity CID 1196501: Missing break in switch (MISSING_BREAK)
I introduced that bug recently by commit
96a5b3a869.
As a result, it will flood unintentionally error message to log.
Reported-by: <scan-admin@coverity.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pull exynos media updates from Mauro Carvalho Chehab:
"These are the remaining patches I have for the merge windows. It
basically adds a new sensor and adds the needed DT bits for it to
work"
* 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] s5p-fimc: Remove reference to outdated macro
[media] s5p-jpeg: Fix broken indentation in jpeg-regs.h
[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver
[media] exynos4-is: Add support for asynchronous subdevices registration
[media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs
[media] exynos4-is: Use external s5k6a3 sensor driver
[media] V4L: s5c73m3: Add device tree support
[media] V4L: Add driver for s5k6a3 image sensor
[media] Documentation: devicetree: Update Samsung FIMC DT binding
[media] Documentation: dt: Add binding documentation for S5C73M3 camera
[media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
Pull media updates from Mauro Carvalho Chehab:
"The main set of series of patches for media subsystem, including:
- document RC sysfs class
- added an API to setup scancode to allow waking up systems using the
Remote Controller
- add API for SDR devices. Drivers are still on staging
- some API improvements for getting EDID data from media
inputs/outputs
- new DVB frontend driver for drx-j (ATSC)
- one driver (it913x/it9137) got removed, in favor of an improvement
on another driver (af9035)
- added a skeleton V4L2 PCI driver at documentation
- added a dual flash driver (lm3646)
- added a new IR driver (img-ir)
- added an IR scancode decoder for the Sharp protocol
- some improvements at the usbtv driver, to allow its core to be
reused.
- added a new SDR driver (rtl2832u_sdr)
- added a new tuner driver (msi001)
- several improvements at em28xx driver to fix PM support, device
removal and to split the V4L2 specific bits into a separate
sub-driver
- one driver got converted to videobuf2 (s2255drv)
- the e4000 tuner driver now follows an improved binding model
- some fixes at V4L2 compat32 code
- several fixes and enhancements at videobuf2 code
- some cleanups at V4L2 API documentation
- usual driver enhancements, new board additions and misc fixups"
[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
indentation in of_graph_get_next_endpoint").
The of_graph_get_next_endpoint() function was moved and renamed by
commit fd9fdb78a9 ("[media] of: move graph helpers from
drivers/media/v4l2-core to drivers/of"). It was originally called
v4l2_of_get_next_endpoint() and lived in the file
drivers/media/v4l2-core/v4l2-of.c.
In that original location, it was then fixed to support empty port
nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
nodes"), and that commit clashes badly with the dropped "Reduce
intendation" commit. I had to choose one or the other, and decided
that the "Support empty port nodes" commit was more important ]
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
[media] em28xx: fix PCTV 290e LNA oops
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
[media] m88ds3103: fix bug on .set_tone()
[media] saa7134: fix WARN_ON during resume
[media] v4l2-dv-timings: add module name, description, license
[media] videodev2.h: add parenthesis around macro arguments
[media] saa6752hs: depends on CRC32
[media] si4713: fix Kconfig dependencies
[media] Sensoray 2255 uses videobuf2
[media] adv7180: free an interrupt on failure paths in init_device()
[media] e4000: make VIDEO_V4L2 dependency optional
[media] af9033: Don't export functions for the hardware filter
[media] af9035: use af9033 PID filters
[media] af9033: implement PID filter
[media] rtl2832_sdr: do not use dynamic stack allocation
[media] e4000: fix 32-bit build error
[media] em28xx-audio: make sure audio is unmuted on open()
[media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
...
Pull compat time conversion changes from Peter Anvin:
"Despite the branch name this is really neither an x86 nor an
x32-specific patchset, although it the implementation of the
discussions that followed the x32 security hole a few months ago.
This removes get/put_compat_timespec/val() and replaces them with
compat_get/put_timespec/val() which are savvy as to the current status
of COMPAT_USE_64BIT_TIME.
It removes several unused and/or incorrect/misleading functions (like
compat_put_timeval_convert which doesn't in fact do any conversion)
and also replaces several open-coded implementations what is now
called compat_convert_timespec() with that function"
* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Fix sparse address space warnings
compat: Get rid of (get|put)_compat_time(val|spec)
Here's the huge drivers/staging/ update for 3.15-rc1.
Loads of cleanup fixes, a few drivers removed, and some new ones added.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7BqAACgkQMUfUDdst+ykHUwCguJDlvM7/FGb3QQslAuKN5Np4
n2YAoJ3C355mo8Wxr/bJah3Jms4f+a7Q
=4XGY
-----END PGP SIGNATURE-----
Merge tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the huge drivers/staging/ update for 3.15-rc1.
Loads of cleanup fixes, a few drivers removed, and some new ones
added.
All have been in linux-next for a while"
* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits)
staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI
staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig
staging: comedi: poc: remove obsolete driver
staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE
staging: octeon-usb: prevent memory corruption
staging: usbip: fix line over 80 characters
staging: usbip: fix quoted string split across lines
Staging: unisys: Remove RETINT macro
Staging: unisys: Remove FAIL macro
Staging: unisys: Remove RETVOID macro
Staging: unisys: Remove RETPTR macro
Staging: unisys: Remove RETBOOL macro
Staging: unisys: Remove FAIL_WPOSTCODE_1 macro
Staging: unisys: Cleanup macros to get rid of goto statements
Staging: unisys: include: Remove unused macros from timskmod.h
staging: dgap: fix the rest of the checkpatch warnings in dgap.c
Staging: bcm: Remove unnecessary parentheses
staging: wlags49_h2: Delete unnecessary braces
staging: wlags49_h2: Do not use assignment in if condition
staging: wlags49_h2: Enclose macro in a do-while loop
...
Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a few
other tiny driver core patches.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7A0wACgkQMUfUDdst+ynJNACfZlY+KNKIhNFt1OOW8rQfSZzy
1PYAnjYuOoly01JlPrpJD5b4TdxaAq71
=GVUg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs updates from Greg KH:
"Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a
few other tiny driver core patches.
All have been in linux-next for a while"
* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
kernfs: cache atomic_write_len in kernfs_open_file
numa: fix NULL pointer access and memory leak in unregister_one_node()
Revert "driver core: synchronize device shutdown"
kernfs: fix off by one error.
kernfs: remove duplicate dir.c at the top dir
x86: align x86 arch with generic CPU modalias handling
cpu: add generic support for CPU feature based module autoloading
sysfs: create bin_attributes under the requested group
driver core: unexport static function create_syslog_header
firmware: use power efficient workqueue for unloading and aborting fw load
firmware: give a protection when map page failed
firmware: google memconsole driver fixes
firmware: fix google/gsmi duplicate efivars_sysfs_init()
drivers/base: delete non-required instances of include <linux/init.h>
kernfs: fix kernfs_node_from_dentry()
ACPI / platform: drop redundant ACPI_HANDLE check
kernfs: fix hash calculation in kernfs_rename_ns()
kernfs: add CONFIG_KERNFS
sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
...
Add missing m88ts2022 module reference counts as removing that module
is not allowed when it is used by em28xx-dvb module. That same module
was not unregistered correctly, fix it too.
Error cases validated by returning errors from m88ds3103, m88ts2022
and a8293 probe().
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The first hunk of this patch got merged wrong, likely due to some
changes at the em28xx resume code. Revert it to reapply it right.
This reverts commit 37571b163c.
Reported-by: Chris Lee <updatelee@gmail.com>
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: stable@vger.kernel.org # Don't apply this patch or 37571b163c
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pointer to device state has been moved to different location during
some change. PCTV 290e LNA function still uses old pointer, carried
over FE priv, and it crash.
Reported-by: Janne Kujanpää <jikuja@iki.fi>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add missing m88ts2022 module reference counts as removing that module
is not allowed when it is used by em28xx-dvb module. That same module
was not unregistered correctly, fix it too.
Error cases validated by returning errors from m88ds3103, m88ts2022
and a8293 probe().
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Band switching didn't worked always reliably as there was one
register bit set wrong.
Thanks to Robert Schlabbach for pointing this bug and solution.
Reported-by: Robert Schlabbach <Robert.Schlabbach@gmx.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Do not attempt to reload the tuner modules when resuming after a suspend.
This triggers a WARN_ON in kernel/kmod.c:148 __request_module.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581.
This has always been wrong, but it was never noticed until the WARN_ON
was added in 3.9.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v3.9 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
I completely forgot to add them when I made this module. Loading this module
without it will taint the kernel, which is not intended.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v3.12 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The SI4713 select should be I2C_SI4713 and the USB driver needs to depend on
I2C as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
commit 340a30c514 "s2255drv: upgrade to videobuf2" changed the API
used by the s2255 driver, but did not modify the Kconfig statement,
which can lead to build errors when no other driver already uses
VIDEOBUF2_VMALLOC. This patch does the necessary Kconfig change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
There is request_irq() in init_device(), but the interrupt is not removed
on failure paths. The patch adds proper error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
That tuner driver is mainly for DVB API, but there is some V4L2 API
controls for SDR usage. Make driver compile conditional so that V4L2
is not mandatory. Without the V4L2 support driver is build as a DVB
only, without SDR controls.
Fixes following errors reported by kbuild test robot:
ERROR: "v4l2_ctrl_auto_cluster" [drivers/media/tuners/e4000.ko] undefined!
ERROR: "v4l2_ctrl_new_std" [drivers/media/tuners/e4000.ko] undefined!
ERROR: "v4l2_ctrl_handler_init_class" [drivers/media/tuners/e4000.ko] undefined!
ERROR: "v4l2_ctrl_handler_free" [drivers/media/tuners/e4000.ko] undefined!
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Exporting functions for hardware filter is a bad idea, as it
breaks compilation if:
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_AF9033=m
Because the PID filter function calls would be hardcoded at
af9035.
The same doesn't happen with af9033_attach() because the
dvb_attach() doesn't hardcode it. Instead, it dynamically
links it at runtime.
However, calling dvb_attach() multiple times is problematic,
as it increments module kref.
So, the better is to pass one parameter for the af9033 module
to fill the hardware filters, and then use it inside af9035.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
PID filters are property of af9033 demod. Use PID filters from af9033
driver as it provides those now.
Allow possible dual mode on USB 1.1 mode too as bandwidth could be
just enough when filters are used on both frontends.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Implement PID filter and export it via symbol.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
All error/warnings:
drivers/built-in.o: In function `e4000_set_params':
>> e4000.c:(.text+0x1219a1b): undefined reference to `__umoddi3'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add a video capture node for the FIMC-IS ISP IP block. The Exynos4x12
FIMC-IS ISP IP block has 2 DMA interfaces that allow to capture raw
Bayer and YUV data to memory. Currently only the DMA2 output is and
raw Bayer data capture is supported.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add support for registering external sensor subdevs using
v4l2-async API. The async API is used only for sensor subdevs
and only for booting from DT.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch adds clock provider so the the SCLK_CAM0/1 output clocks
can be accessed by image sensor devices through the clk API.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch removes the common fimc-is-sensor driver for image sensors
that are normally controlled by the FIMC-IS firmware. The FIMC-IS
driver now contains only a table of properties specific to each sensor.
The sensor properties required for the ISP's firmware are parsed from
device tree and retrieved from the internal table, which is selected
based on the compatible property of an image sensor.
To use the Exynos4x12 internal ISP the S5K6A3 sensor driver (drivers/
media/i2c/s5k6a3.c) is now required.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch adds the V4L2 asynchronous subdev registration and
device tree support. Common clock API is used to control the
sensor master clock from within the subdev.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch adds subdev driver for Samsung S5K6A3 raw image sensor.
As it is intended at the moment to be used only with the Exynos
FIMC-IS (camera ISP) subsystem it is pretty minimal subdev driver.
It doesn't do any I2C communication since the sensor is controlled
by the ISP and its own firmware.
This driver, if needed, can be updated in future into a regular
subdev driver where the main CPU communicates with the sensor
directly.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
In all cases, when the first capture is called, we need to
call the code that unmutes the volume.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The calculated values for the minlen and maxlen fields, which were
rounded to multiples of 2 and clamped to a valid range, were left
unused. Use them in the calculation of the register value rather than
using the raw input minlen and maxlen.
This fixes the following warning with a W=1 build:
drivers/media/rc/img-ir/img-ir-hw.c In function ‘img_ir_free_timing’:
drivers/media/rc/img-ir/img-ir-hw.c +228 :23: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable]
drivers/media/rc/img-ir/img-ir-hw.c +228 :15: warning: variable ‘minlen’ set but not used [-Wunused-but-set-variable]
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The JVC timings included timings intended for the secondary decoder
(which matches messages with no leader), however they were in the wrong
part of the timings structure, repeating s00 and s01 rather than being
in s10 and s11.
Distinct repeat timings can't be properly supported yet for JVC anyway
since the scancode callback cannot determine which decoder matched the
message, so for now remove these timings and don't bother to enable the
secondary decoder.
This fixes the following warnings with W=1:
drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: initialized field overwritten [-Woverride-init]
drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: (near initialization for ‘img_ir_jvc.timings.s00’) [-Woverride-init]
drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: initialized field overwritten [-Woverride-init]
drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: (near initialization for ‘img_ir_jvc.timings.s01’) [-Woverride-init]
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Rename some variables.
Change error status checks from (ret < 0) to (ret).
No actual functionality changes.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
That comes possible after driver was converted to kernel I2C model
(I2C binding & proper I2C client with no gate control hack). All
nasty low level I2C routines are now covered by regmap.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Gate control is now implemented by rtl2832 I2C adapter so we do not
need proprietary DVB i2c_gate_ctrl() anymore.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate
control. Pass those adapters to rtl2832_sdr and e4000 modules in order
to get rid of proprietary DVB .i2c_gate_ctrl() callback use.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
We need depend on I2C_MUX as rtl2832 demod used requires it.
All error/warnings:
warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX)
ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!
ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Implement PLL lock control to get PLL lock flag status from tuner
synthesizer.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
There was 32-bit overflow on VCO frequency calculation which blocks
tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO
frequency overflow.
After that fix device in question tunes to following range:
60 - 1104 MHz
1250 - 2207 MHz
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Implement gain and bandwidth controls using v4l2 control framework.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Driver conversion from proprietary DVB tuner model to more
general I2C driver model.
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
rc_map_get() takes a single string literal for the module to load,
so make sure it cannot be used as a format string in the call to
request_module().
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Rename v4l2_format_sdr to v4l2_sdr_format in order to keep it in
line with other formats.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add volatile boolean control to indicate if tuner frequency synthesizer
is locked to requested frequency. That means tuner is able to receive
given frequency. Control is named as "PLL lock", since frequency
synthesizers are based of phase-locked-loop. Maybe more general name
could be wise still?
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Modern silicon RF tuners has one or more adjustable filters on
signal path, in order to filter noise from desired radio channel.
Add channel bandwidth control to tell the driver which is radio
channel width we want receive. Filters could be then adjusted by
the driver or hardware, using RF frequency and channel bandwidth
as a base of filter calculations.
On automatic mode (normal mode), bandwidth is calculated from sampling
rate or tuning info got from userspace. That new control gives
possibility to set manual mode and let user have more control for
filters.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The "Renesas Corporation" listed in the copyright notice doesn't exist.
Replace it with "Renesas Electronics Corporation" and update the
copyright years.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Check if index is within bounds _before_ accessing the value.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It was possible that tuner_frequency variable, used for carrier offset
compensation, was uninitialized. That happens when tuner
.get_frequency() callback is not defined.
Currently that case is not possible as only used tuner has this callback.
Coverity CID 1166057: Uninitialized scalar variable (UNINIT)
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Coverity CID 1166051: Logically dead code (DEADCODE)
TS clock calculation could be more accurate, but as it is not,
remove those unused clock speeds.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
While playing with make coccicheck I noticed this message:
drivers/media/rc/rc-main.c:1245:3-9: preceding lock on line 1238
It was introduced by commit 587d1b06e0 ([media] rc-core: reuse device
numbers) which returns -ENOMEM after a mutex_lock without first
unlocking it when there are no more device numbers left. The added code
doesn't depend on the device lock, so move it before the lock is taken.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Static checkers complain about the inconsistent NULL check here.
There is an unchecked dereference of "input->fe" in the call to
tuner_attach_tda18271() and there is a second unchecked dereference a
couple lines later when we do:
input->fe2->tuner_priv = input->fe->tuner_priv;
But actually "intput->fe" can't be NULL because if demod_attach_drxk()
fails to allocate it, then we would have return an error code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
ARRAY_SIZE(buf) (8 elements) was intended instead of sizeof(buf) (16
bytes). But this is just a sanity check and the callers always pass
valid values so this doesn't cause a problem.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an img-ir module for decoding the Sanyo infrared protocol.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an img-ir module for decoding the Sharp infrared protocol.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an img-ir module for decoding the Sony infrared protocol.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an img-ir module for decoding the JVC infrared protocol.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add an img-ir module for decoding the NEC and extended NEC infrared
protocols.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add ImgTec IR decoder driver to the build system.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
