Commit Graph

273 Commits

Author SHA1 Message Date
Christoph Hellwig
47feb41888 PCI/MSI: Remove unused pci_msi_create_default_irq_domain()
pci_msi_create_default_irq_domain() is never called in the whole tree, so
remove it as well as all the supporting code for a default PCI MSI domain.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10 14:29:45 -06:00
Christophe JAILLET
3adfb572f2 PCI/MSI: Return failure when msix_setup_entries() fails
If alloc_msi_entry() fails, we free resources and set ret = -ENOMEM.

However, msix_setup_entries() returns 0 unconditionally.  Return the error
code instead.

Fixes: e75eafb9b0 ("genirq/msi: Switch to new irq spreading infrastructure")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10 14:10:24 -06:00
Christoph Hellwig
4fe0395550 PCI/MSI: Remove pci_enable_msi_{exact,range}()
All multi-MSI allocations are now done through pci_irq_alloc_vectors(), so
remove the old pci_enable_msi_range() and pci_enable_msi_exact()
interfaces.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-13 11:08:21 -06:00
Randy Dunlap
dadf17334f PCI/MSI: Fix msi_capability_init() kernel-doc warnings
Fix kernel-doc warnings in pci/msi.c:

  ..//drivers/pci/msi.c:623: warning: No description found for parameter 'affd'
  ..//drivers/pci/msi.c:623: warning: Excess function parameter 'affinity' description in 'msi_capability_init'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-11 15:11:28 -06:00
Linus Torvalds
0ab7b12c49 pci-v4.10-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUt1vAAoJEFmIoMA60/r8abgP/3R+5Lsk5/kfAHk5/2Mtqbvg
 mZ0eDUpY9GbUeMjSq84Nr2H8u7d+1AJCCu8KtDJYZCmjZpnSp2SuE2PS5JoGC7zC
 fintD24jlIF4/J5+HeVXXmbfr3xATxvpTuiSLEi8sLBRJ3KRIswhMSwoPwOyeTQw
 v/EclWKPGYcI5Zp0oigY9/Jd3q3lQ17KXppi/0dDoLh7PNOFvEHItXWzmf++u/NP
 iYT9R1xmzEsy0/HRd6hiwPT2xA8YsAXxgobhHooUgh1FWmZ02Tg1WjgDemOW4lVh
 kNIUcsLczh7wZCceogrrJ+pwb9+NyyIyKuHPv6OG3ieyz1IZdznaj1fAE5HJYiPo
 eVS7cP1S6DyV3Y5qFj5F2dSRS7T4GXdXG5mNhmeCpUHs0vfzSCG36jLmhTy8UIxs
 1rCf5oFa+uU9q0okfH8VtcGOXqWjGgyxTSGGfF71HUMLnPbsci2fxC2cO6svzIX7
 wDY0uxOzpyMIYMuQR6iz7VqvAwEaZ+7pfMIrWWdDcQ9/5tCNJ49cLuKaThPL4bVu
 juiGBQtnTLg8tjrhjDL9tQiJpuVIweVXyyQ1fvZoVXkMLlhVCF2ttirvwFUit2PB
 84OlevQZ+9QdE/qalrWbv4qzhesuiwu0avkzjGoqg6tWTF0epu2AHI2vqy6UBYEG
 tcfJPEcz1019PKZNSvWy
 =ut0k
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes:

   - add support for PCI on ARM64 boxes with ACPI. We already had this
     for theoretical spec-compliant hardware; now we're adding quirks
     for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene)

   - add runtime PM support for hotplug ports

   - enable runtime suspend for Intel UHCI that uses platform-specific
     wakeup signaling

   - add yet another host bridge registration interface. We hope this is
     extensible enough to subsume the others

   - expose device revision in sysfs for DRM

   - to avoid device conflicts, make sure any VF BAR updates are done
     before enabling the VF

   - avoid unnecessary link retrains for ASPM

   - allow INTx masking on Mellanox devices that support it

   - allow access to non-standard VPD for Chelsio devices

   - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA,
     etc

   - update Rockchip support for max-link-speed

   - add NVIDIA Tegra210 support

   - add Layerscape LS1046a support

   - update R-Car compatibility strings

   - add Qualcomm MSM8996 support

   - remove some uninformative bootup messages"

* tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits)
  PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)
  PCI: Expand "VPD access disabled" quirk message
  PCI: pciehp: Remove loading message
  PCI: hotplug: Remove hotplug core message
  PCI: Remove service driver load/unload messages
  PCI/AER: Log AER IRQ when claiming Root Port
  PCI/AER: Log errors with PCI device, not PCIe service device
  PCI/AER: Remove unused version macros
  PCI/PME: Log PME IRQ when claiming Root Port
  PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors
  PCI: Move config space size macros to pci_regs.h
  x86/platform/intel-mid: Constify mid_pci_platform_pm
  PCI/ASPM: Don't retrain link if ASPM not possible
  PCI: iproc: Skip check for legacy IRQ on PAXC buses
  PCI: pciehp: Leave power indicator on when enabling already-enabled slot
  PCI: pciehp: Prioritize data-link event over presence detect
  PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar
  PCI: rcar: Use gen2 fallback compatibility last
  PCI: rcar-gen2: Use gen2 fallback compatibility last
  PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init()
  ..
2016-12-15 12:46:48 -08:00
Christoph Hellwig
402723ad5c PCI/MSI: Provide pci_alloc_irq_vectors_affinity()
This is a variant of pci_alloc_irq_vectors() that allows passing a struct
irq_affinity to provide fine-grained IRQ affinity control.

For now this means being able to exclude vectors at the beginning or end of
the MSI vector space, but it could also be used for any other quirks needed
in the future (e.g. more vectors than CPUs, or excluding CPUs from the
spreading).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-6-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09 08:25:10 +01:00
Christoph Hellwig
61e1c59052 PCI/MSI: Propagate IRQ affinity description through the MSI code
No API change yet, just pass it down all the way from
pci_alloc_irq_vectors() to the core MSI code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-5-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09 08:25:09 +01:00
Christoph Hellwig
67c93c218d genirq/affinity: Handle pre/post vectors in irq_create_affinity_masks()
Only calculate the affinity for the main I/O vectors, and skip the
pre or post vectors specified by struct irq_affinity.

Also remove the irq_affinity cpumask argument that has never been used.
If we ever need it in the future we can pass it through struct
irq_affinity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09 08:25:09 +01:00
Christoph Hellwig
212bd84622 genirq/affinity: Handle pre/post vectors in irq_calc_affinity_vectors()
Only calculate the affinity for the main I/O vectors, and skip the pre or
post vectors specified by struct irq_affinity.

Also remove the irq_affinity cpumask argument that has never been used.  If
we ever need it in the future we can pass it through struct irq_affinity.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-09 08:25:08 +01:00
Jan Beulich
d1d111e073 PCI/MSI: Check for NULL affinity mask in pci_irq_get_affinity()
If msi_setup_entry() fails to allocate an affinity mask, it logs a message
but continues on and allocates an MSI entry with entry->affinity == NULL.

Check for this case in pci_irq_get_affinity() so we don't try to
dereference a NULL pointer.

[bhelgaas: changelog]
Fixes: ee8d41e53e "pci/msi: Retrieve affinity for a vector"
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Thomas Gleixner <tglx@linutronix.de>
2016-11-08 15:35:17 -06:00
Stephen Hemminger
62c6151419 doc: Add missing parameter for msi_setup
commit 92ca8d20dee2 ("genirq/msi: Switch to new irq spreading")
introduced new parameter to msi_init_setup and but did not update
docbook comments. Fixes 'make htmldocs' warning.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Cc: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26 12:05:34 +02:00
Thomas Gleixner
0a30d69195 Merge branch 'irq/for-block' into irq/core
Add the new irq spreading infrastructure.
2016-09-15 20:54:40 +02:00
Thomas Gleixner
ee8d41e53e pci/msi: Retrieve affinity for a vector
Add a helper to get the affinity mask for a given PCI irq vector.  For MSI or
MSI-X vectors these are stored by the IRQ core, while for legacy interrupts
we will always return cpu_possible_map.

[hch: updated to follow the style of pci_irq_vector()]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: axboe@fb.com
Cc: keith.busch@intel.com
Cc: agordeev@redhat.com
Cc: linux-block@vger.kernel.org
Link: http://lkml.kernel.org/r/1473862739-15032-6-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 22:11:10 +02:00
Thomas Gleixner
e75eafb9b0 genirq/msi: Switch to new irq spreading infrastructure
Switch MSI over to the new spreading code. If a pci device contains a valid
pointer to a cpumask, then this mask is used for spreading otherwise the
online cpu mask is used. This allows a driver to restrict the spread to a
subset of CPUs, e.g. cpus on a particular node.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: axboe@fb.com
Cc: keith.busch@intel.com
Cc: agordeev@redhat.com
Cc: linux-block@vger.kernel.org
Link: http://lkml.kernel.org/r/1473862739-15032-4-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 22:11:09 +02:00
Thomas Gleixner
28f4b04143 genirq/msi: Add cpumask allocation to alloc_msi_entry
For irq spreading want to store affinity masks in the msi_entry. Add the
infrastructure for it.

We allocate an array of cpumasks with an array size of the number of used
vectors in the entry, so we can hand in the information per linux interrupt
later.

As we hand in the number of used vectors, we assign them right
away. Convert all the call sites.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@fb.com
Cc: keith.busch@intel.com
Cc: agordeev@redhat.com
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de
2016-09-14 22:11:08 +02:00
Tomasz Nowicki
be2021baee PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
It is possible to provide information about which MSI controller to
use on a per-device basis for DT. This patch supply this with ACPI support.

Currently, IORT is the only one ACPI table which can provide such mapping.
In order to plug IORT into MSI infrastructure we are adding ACPI
equivalents for finding PCI device domain and its RID translation
(pci_msi_domain_get_msi_rid and pci_msi_domain_get_msi_rid calls).

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12 20:32:41 +01:00
Linus Torvalds
219c04cea3 PCI updates for v4.8:
Resource management
     Update "pci=resource_alignment" documentation (Mathias Koehrer)
 
   MSI
     Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
     Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)
 
   Intel VMD host bridge driver
     Fix infinite loop executing irq's (Keith Busch)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXvvHgAAoJEFmIoMA60/r8y+MP/3cXG5FG3fdRB9Pn8q5BvdD4
 hmIgOpuEH859iYFOUJNxVB6haxG73Z+z3aFvNUDKTOh7GXQ7UHzNw1qj1OEmjXS0
 ex45ynjxP2DTBIO3eoyLpTKaRuOCAz03sDIucK9NzSBkrazBGoaxRRYY5gi+V8K9
 CNsbT8pPSGOrfRX6nk2QjiGMHVw+ExurvskbwuQmRYmHGU1Y1nnkmlnT5AMUJsn+
 BgSLOLFkv9UOIfLVY2+/KCnPFfi0nIxspCJHinosLl5BsgULgFPdRFKr6SiY+yhx
 W3d8MKnhDX5wsajtE7V/HurYmETiyimLL1ZBPJOCzGXwNGrwvUrt1rji+83S+1Zx
 LbrPGDRNBLW51prcrxOx1Pr/RDaHT0+/2UrSvaeUnTqniV5xW1daBPvB6h8jbKih
 C+GGqfiHURvJi1sd9QUMP95yVaxVgSBM9BrKfNYAmVYarnCpx3xbdeMv8gA0+QHx
 Ts0QKJ7ph80mcztdk2H0Ov7OK+OGjDhZPDijXiCTSPfKgK0HPsaytDCULt9LcqAv
 M8daeD42nwe36xOlNgcosj++gL+VxVYk/4BAiOWCgwF+k2EDh1ol8/eK6a+hXAqC
 qslLMNNucZP5BSsSIYc5KVGbkEXuHTw8viUNvBhLE2CWD3SY378IlzrF7QxjgKNl
 AawNqjfXY7obX3m5xr9g
 =qJG4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "Resource management:
   - Update "pci=resource_alignment" documentation (Mathias Koehrer)

  MSI:
   - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
   - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)

  Intel VMD host bridge driver:
   - Fix infinite loop executing irq's (Keith Busch)"

* tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: VMD: Fix infinite loop executing irq's
  PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
  PCI: Use positive flags in pci_alloc_irq_vectors()
  PCI: Update "pci=resource_alignment" documentation
2016-08-26 18:26:07 -07:00
Christoph Hellwig
5d0bdf2867 PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
ahci currently insists on an explicit call to pci_intx() before falling
back from MSI or MSI-X to legacy IRQs.  As pci_intx() is a no-op if the
command register already contains the right value it seems safe and useful
to add this call to pci_alloc_irq_vectors() so that ahci can just use
pci_alloc_irq_vectors().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-18 08:02:40 -05:00
Christoph Hellwig
4fe0d15488 PCI: Use positive flags in pci_alloc_irq_vectors()
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of
certain interrupt types, pass positive flags like PCI_IRQ_LEGACY,
PCI_IRQ_MSI, etc., to specify the acceptable interrupt types.

This is based on a number of pending driver conversions that just happend
to be a whole more obvious to read this way, and given that we have no
users in the tree yet it can still easily be done.

I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting
all interrupt types very simple.

[bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of
PCI_IRQ_NOLEGACY]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-08-16 14:07:30 -05:00
Marc Zyngier
f3b0946d62 genirq/msi: Make sure PCI MSIs are activated early
Bharat Kumar Gogada reported issues with the generic MSI code, where the
end-point ended up with garbage in its MSI configuration (both for the vector
and the message).

It turns out that the two MSI paths in the kernel are doing slightly different
things:

generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP
PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI

And it turns out that end-points are allowed to latch the content of the MSI
configuration registers as soon as MSIs are enabled.  In Bharat's case, the
end-point ends up using whatever was there already, which is not what you
want.

In order to make things converge, we introduce a new MSI domain flag
(MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set,
this flag forces the programming of the end-point as soon as the MSIs are
allocated.

A consequence of this is that we have an extra activate in irq_startup, but
that should be without much consequence.

tglx: 

 - Several people reported a VMWare regression with PCI/MSI-X passthrough. It
   turns out that the patch also cures that issue.

 - We need to have a look at the MSI disable interrupt path, where we write
   the msg to all zeros without disabling MSI in the PCI device. Is that
   correct?

Fixes: 52f518a3a7 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts"
Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru>
Reported-by: Matthias Prager <linux@matthiasprager.de>
Reported-by: Jason Taylor <jason.taylor@simplivity.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-09 09:19:32 +02:00
Christoph Hellwig
4ef33685aa PCI: Spread interrupt vectors in pci_alloc_irq_vectors()
Set the affinity_mask in the PCI device before allocating vectors so that
the affinity can be propagated through the MSI descriptor structures to the
core IRQ code.  To facilitate this, new __pci_enable_msi_range() and
__pci_enable_msix_range() helpers are factored out of their not prefixed
variants which assigning the new IRQ affinity mask in the PCI device so
that the low-level interrupt code can perform the interrupt affinity
assignment and do node-local allocations.

A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors() so that
this function can also be used by drivers that don't wish to use the
automatic affinity assignment.

[bhelgaas: omit "else" after "return" consistently]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:57:03 -05:00
Christoph Hellwig
aff171641d PCI: Provide sensible IRQ vector alloc/free routines
Add a function to allocate and free a range of interrupt vectors, using
MSI-X, MSI or legacy vectors (in that order) based on the capabilities of
the underlying device and PCIe complex.

Additionally a new helper is provided to get the Linux IRQ number for given
device-relative vector so that the drivers don't need to allocate their own
arrays to keep track of the vectors for the multi vector MSI-X case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:50:07 -05:00
Christoph Hellwig
3ac020e0ca PCI: Make the "entries" argument to pci_enable_msix() optional
The "entries" argument isn't needed if the list of entries does not contain
any holes.  Make it optional so that we can avoid the need to allocate a
msix_entry structure for this (common) case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:49:43 -05:00
Christoph Hellwig
12eb21de1f PCI: Switch msix_program_entries() to use pci_msix_desc_addr()
Instead of relying on the msix_entry structure for the vector number, read
it from the msi_desc.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:49:33 -05:00
Christoph Hellwig
5eb6d66019 PCI: Add pci_msix_desc_addr() helper
Add a pci_msix_desc_addr() helper to factor out the calculation of the base
address for a given MSI-X vector.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
2016-07-21 15:04:24 -05:00
Linus Torvalds
d43421565b PCI changes for the v4.5 merge window:
Enumeration
     Simplify config space size computation (Bjorn Helgaas)
     Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
     Support PCIe devices with short cfg_size (Jason S. McMullan)
     Add Netronome vendor and device IDs (Jason S. McMullan)
     Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
     Add Netronome NFP4000 PF device ID (Simon Horman)
     Limit config space size for Netronome NFP4000 (Simon Horman)
     Print warnings for all invalid expansion ROM headers (Vladis Dronov)
 
   Resource management
     Fix minimum allocation address overwrite (Christoph Biedl)
 
   PCI device hotplug
     acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
     pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
     shpchp: Constify hpc_ops structure (Julia Lawall)
     ibmphp: Remove unneeded NULL test (Julia Lawall)
 
   Power management
     Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)
 
   Virtualization
     Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)
 
   MSI
     Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
     Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
     Initialize MSI capability for all architectures (Guilherme G. Piccoli)
     Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)
 
   ARM Versatile host bridge driver
     Remove unused pci_sys_data structures (Lorenzo Pieralisi)
 
   Broadcom iProc host bridge driver
     Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
     Do not use 0x in front of %pap (Dmitry V. Krivenok)
     Update iProc PCIe device tree binding (Ray Jui)
     Add PAXC interface support (Ray Jui)
     Add iProc PCIe MSI device tree binding (Ray Jui)
     Add iProc PCIe MSI support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Use gpio_set_value_cansleep() (Fabio Estevam)
     Add support for active-low reset GPIO (Petr Štetiar)
 
   HiSilicon host bridge driver
     Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)
 
   Intel VMD host bridge driver
     Export irq_domain_set_info() for module use (Keith Busch)
     x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
     Use 32 bit PCI domain numbers (Keith Busch)
     Add driver for Intel Volume Management Device (VMD) (Keith Busch)
 
   Qualcomm host bridge driver
     Document PCIe devicetree bindings (Stanimir Varbanov)
     Add Qualcomm PCIe controller driver (Stanimir Varbanov)
     dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
     dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)
 
   Renesas R-Car host bridge driver
     Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
     Allow DT to override default window settings (Phil Edworthy)
     Convert to DT resource parsing API (Phil Edworthy)
     Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
     Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
     Add runtime PM support to pcie-rcar (Phil Edworthy)
     Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
     Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
     Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)
 
   Synopsys DesignWare host bridge driver
     Simplify control flow (Bjorn Helgaas)
     Make config accessor override checking symmetric (Bjorn Helgaas)
     Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)
 
   Miscellaneous
     Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
     Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
     Fix all whitespace issues (Bogicevic Sasa)
     x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
     Use to_pci_dev() instead of open-coding it (Geliang Tang)
     Use kobj_to_dev() instead of open-coding it (Geliang Tang)
     Use list_for_each_entry() to simplify code (Geliang Tang)
     Fix typos in <linux/msi.h> (Thomas Petazzoni)
     x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoQIuAAoJEFmIoMA60/r8ckYP/0ZrkANeN1SB5cQVi2k7aceq
 kQb1Hk6ifxohJvgpJ/iwmVCHoApyeBfUBfrC+fUpIC2f7ncPsE5HNyjqpAWzFzj2
 sYWwY029yjBQ9g4mPhkvjBXfha+lNtLthWc+Xxcat5pdcyG63Dg4SfJKWm2ZYnbN
 0GJzyRZXIwAMnNf0KIr61Aqru0nXeHvi5wblyJ08UZ7AcNzCtB0wKLmE3S6SeZVF
 f2fry35zcGu+TFvQ1hAYemfl3XyDBJ87nPiKzJAwYSaKcWPFWt+72PBDPO6X9squ
 6prm4nmAgeG2Oo4Zu0fbkDlB2bEsWUc14/xT0i5Wfs35vcwzF+S1zirJAtVqoNir
 NgC7fSbEHbsS7FZOz0rBOBIvIkbb6NdfLFuZqUFv0X1M5bRFywjo8lZRfAYoGJzK
 Mmus0uKbklx5m6RT5adf9+Plev1YJT6XZW9XrDpGnxrwRyPjHmyvuTWsYkumxY7Q
 CE5Wr3p7q2I2+MtrQVv2D9Nzsb+4zQ6BgHrd2vwR/IxTsfdXLU7+B691wkUDX8No
 UKFxBd0FiVCn+srG96u7lWQvdoUqoNCogTZSVzGR5gFBv3zAN9gi8HS7NbV558Mg
 Io3Xw+6dcbG33uvWdU6jHEDLMQsohZcp05Q5esCgRQNV4cGJbPxBDtOZEO/ezvW4
 FAI7lfgYTFiQK3NzE3Ng
 =z9mQ
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...
2016-01-21 11:52:16 -08:00
Jake Oshins
a4289dc2ec genirq/msi: Export functions to allow MSI domains in modules
The Linux kernel already has the concept of IRQ domain, wherein a
component can expose a set of IRQs which are managed by a particular
interrupt controller chip or other subsystem. The PCI driver exposes
the notion of an IRQ domain for Message-Signaled Interrupts (MSI) from
PCI Express devices. This patch exposes the functions which are
necessary for creating a MSI IRQ domain within a module.

[ tglx: Split it into x86 and core irq parts ]

Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: kys@microsoft.com
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: vkuznets@redhat.com
Cc: haiyangz@microsoft.com
Cc: marc.zyngier@arm.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1449769983-12948-4-git-send-email-jakeo@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-20 12:26:52 +01:00
Marc Zyngier
3845d2953a PCI/MSI: Only use the generic MSI layer when domain is hierarchical
Since d8a1cb7575 ("PCI/MSI: Let pci_msi_get_domain use struct
device::msi_domain"), we use the MSI domain associated with the PCI device.

But finding an MSI domain doesn't mean that the domain is implemented using
the generic MSI domain API, and a number of MSI controllers are still using
arch_setup_msi_irq() and arch_teardown_msi_irqs().

Check that the domain we just obtained is hierarchical.  If it is, we can
use the new generic MSI stuff.  Otherwise we have to fall back to the old
arch_setup_msi_irq() and arch_teardown_msi_irqs() interfaces.

This avoids an oops in msi_domain_alloc_irqs() on systems with R-Car,
Tegra, Armada 370, and probably other DesignWare-based host controllers.

Fixes: d8a1cb7575 ("PCI/MSI: Let pci_msi_get_domain use struct device::msi_domain")
Reported-by: Phil Edworthy <phil.edworthy@renesas.com>
Tested-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@vger.kernel.org	# v4.3+
2015-12-04 10:28:14 -06:00
Bjorn Helgaas
128fc68ca1 PCI/MSI: Remove empty pci_msi_init_pci_dev()
4a7cc83167 ("genirq/MSI: Move msi_list from struct pci_dev to struct
device") removed the contents of pci_msi_init_pci_dev().  All
implementation of it are now empty, so remove it completely.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-30 19:35:53 -06:00
Linus Torvalds
3c87b79188 PCI changes for the v4.4 merge window:
Resource management
     Add support for Enhanced Allocation devices (Sean O. Stalley)
     Add Enhanced Allocation register entries (Sean O. Stalley)
     Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
     Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
     Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
     Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
     Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
     Expand Enhanced Allocation BAR output (Bjorn Helgaas)
     Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Add sparc mem64 resource parsing for root bus (Yinghai Lu)
 
   PCI device hotplug
     pciehp: Queue power work requests in dedicated function (Guenter Roeck)
 
   Driver binding
     Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)
 
   Virtualization
     Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
     Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
     Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
     Reorder pcibios_sriov_disable() (Alexander Duyck)
     Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
     Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
     Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
     Don't try to restore VF BARs (Wei Yang)
 
   MSI
     Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
     Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
     Export all remapped MSIs to sysfs attributes (Romain Bezut)
     Disable MSI on SiS 761 (Ondrej Zary)
 
   AER
     Clear error status registers during enumeration and restore (Taku Izumi)
 
   Generic host bridge driver
     Fix lookup of linux,pci-probe-only property (Marc Zyngier)
     Allow multiple hosts with different map_bus() methods (David Daney)
     Pass starting bus number to pci_scan_root_bus() (David Daney)
     Fix address window calculation for non-zero starting bus (David Daney)
 
   Altera host bridge driver
     Add msi.h to ARM Kbuild (Ley Foon Tan)
     Add Altera PCIe host controller driver (Ley Foon Tan)
     Add Altera PCIe MSI driver (Ley Foon Tan)
 
   APM X-Gene host bridge driver
     Remove msi_controller assignment (Duc Dang)
 
   Broadcom iProc host bridge driver
     Fix header comment "Corporation" misspelling (Florian Fainelli)
     Fix code comment to match code (Ray Jui)
     Remove unused struct iproc_pcie.irqs[] (Ray Jui)
     Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
     Fix PCIe reset logic (Ray Jui)
     Improve link detection logic (Ray Jui)
     Update PCIe device tree bindings (Ray Jui)
     Add outbound mapping support (Ray Jui)
 
   Freescale i.MX6 host bridge driver
     Return real error code from imx6_add_pcie_port() (Fabio Estevam)
     Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)
 
   Freescale Layerscape host bridge driver
     Remove ls_pcie_establish_link() (Minghuan Lian)
     Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
     Factor out SCFG related function (Minghuan Lian)
     Update ls_add_pcie_port() (Minghuan Lian)
     Remove unused fields from struct ls_pcie (Minghuan Lian)
     Add support for LS1043a and LS2080a (Minghuan Lian)
     Add ls_pcie_msi_host_init() (Minghuan Lian)
 
   HiSilicon host bridge driver
     Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)
 
   Marvell MVEBU host bridge driver
     Return zero for reserved or unimplemented config space (Russell King)
     Use exact config access size; don't read/modify/write (Russell King)
     Use of_get_available_child_count() (Russell King)
     Use for_each_available_child_of_node() to walk child nodes (Russell King)
     Report full node name when reporting a DT error (Russell King)
     Use port->name rather than "PCIe%d.%d" (Russell King)
     Move port parsing and resource claiming to  separate function (Russell King)
     Fix memory leaks and refcount leaks (Russell King)
     Split port parsing and resource claiming from  port setup (Russell King)
     Use gpio_set_value_cansleep() (Russell King)
     Use devm_kcalloc() to allocate an array (Russell King)
     Use gpio_desc to carry around gpio (Russell King)
     Improve clock/reset handling (Russell King)
     Add PCI Express root complex capability block (Russell King)
     Remove code restricting accesses to slot 0 (Russell King)
 
   NVIDIA Tegra host bridge driver
     Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)
 
   Renesas R-Car host bridge driver
     Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
     Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
     Make PCI aware of the I/O resources (Phil Edworthy)
     Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
     Set root bus nr to that provided in DT (Phil Edworthy)
     Fix I/O offset for multiple host bridges (Phil Edworthy)
 
   ST Microelectronics SPEAr13xx host bridge driver
     Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)
 
   Synopsys DesignWare host bridge driver
     Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
     Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
     Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
     Require config accesses to be naturally aligned (Gabriele Paoloni)
     Make "num-lanes" an optional DT property (Gabriele Paoloni)
     Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
     Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
     Factor out MSI msg setup (Lucas Stach)
     Implement multivector MSI IRQ setup (Lucas Stach)
     Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
     Set up high part of MSI target address (Lucas Stach)
     Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
     Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
     Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
     Make driver arch-agnostic (Zhou Wang)
 
   Miscellaneous
     Make x86 pci_subsys_init() static (Alexander Kuleshov)
     Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPM9aAAoJEFmIoMA60/r89f8QALFMHegqKk5M08ZcCaG7unLF
 5U5t88y6KF/kNYF6HOqLQiHh79U3ToU5HdrNaAtutr0UnvgbFC2WulLqKYgLiq6Y
 YJnwR3EfgGmdG7DKAVAXq19+nc2hgTPAEe8sciU7HKlTbqQmGj6//y3sQULGNLx3
 zur0C33DCtrDgKDP7to273lkHO8Vl0YuLzyqwt0ePCMNcXR0h1dK8QxSTjuXBxaR
 c+T1V1Hw64MTxLz3xJd1/1ipy32u+9LnqqcdRz0zRq6qi48G9ch/i4Z6DHa8kTbj
 DUZrrTYKILQ2TcjcZSBmTueX11Z1Xa4/I/45sehIi6gVWL9qQbmGpt2E5YtFED+4
 GdcmBSbWG/qsNsabXk38uiM3ww7+ltXEOhTXbcK+EgjvIhE6gSK/plYG0fU9pybs
 AKViEXVdHoT1X0N1dLK12mq7kvDCQvShHn08lz97Q9YrZ32wv1Fnij6WVSbJvfWt
 DubtPtisVM+rVy+VTpOImNR9wO54lTmG5jK53yNqH7I20K89y1kqARlN9nMXMB1a
 2nQnwe9yWlsGj9gVNCn1KmyQSPOWjg+3Z+ekfwbxpca14s1AaN3Jm0N9Z61dXFoF
 y2ygoQtZ/z9BHr3quBpxXGt+aVUg2kcNw5GYeDYiALxXdJSObyzRrZ6HDb/zicU2
 ZH9hBj0ctXvucmy6I2mt
 =uZrt
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Resource management:
   - Add support for Enhanced Allocation devices (Sean O. Stalley)
   - Add Enhanced Allocation register entries (Sean O. Stalley)
   - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney)
   - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney)
   - Handle Enhanced Allocation capability for SR-IOV devices (David Daney)
   - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas)
   - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas)
   - Expand Enhanced Allocation BAR output (Bjorn Helgaas)
   - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier)
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Add sparc mem64 resource parsing for root bus (Yinghai Lu)

  PCI device hotplug:
   - pciehp: Queue power work requests in dedicated function (Guenter Roeck)

  Driver binding:
   - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker)

  Virtualization:
   - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck)
   - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck)
   - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck)
   - Reorder pcibios_sriov_disable() (Alexander Duyck)
   - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck)
   - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck)
   - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton)
   - Don't try to restore VF BARs (Wei Yang)

  MSI:
   - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel)
   - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach)
   - Export all remapped MSIs to sysfs attributes (Romain Bezut)
   - Disable MSI on SiS 761 (Ondrej Zary)

  AER:
   - Clear error status registers during enumeration and restore (Taku Izumi)

  Generic host bridge driver:
   - Fix lookup of linux,pci-probe-only property (Marc Zyngier)
   - Allow multiple hosts with different map_bus() methods (David Daney)
   - Pass starting bus number to pci_scan_root_bus() (David Daney)
   - Fix address window calculation for non-zero starting bus (David Daney)

  Altera host bridge driver:
   - Add msi.h to ARM Kbuild (Ley Foon Tan)
   - Add Altera PCIe host controller driver (Ley Foon Tan)
   - Add Altera PCIe MSI driver (Ley Foon Tan)

  APM X-Gene host bridge driver:
   - Remove msi_controller assignment (Duc Dang)

  Broadcom iProc host bridge driver:
   - Fix header comment "Corporation" misspelling (Florian Fainelli)
   - Fix code comment to match code (Ray Jui)
   - Remove unused struct iproc_pcie.irqs[] (Ray Jui)
   - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui)
   - Fix PCIe reset logic (Ray Jui)
   - Improve link detection logic (Ray Jui)
   - Update PCIe device tree bindings (Ray Jui)
   - Add outbound mapping support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Return real error code from imx6_add_pcie_port() (Fabio Estevam)
   - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam)

  Freescale Layerscape host bridge driver:
   - Remove ls_pcie_establish_link() (Minghuan Lian)
   - Ignore PCIe controllers in Endpoint mode (Minghuan Lian)
   - Factor out SCFG related function (Minghuan Lian)
   - Update ls_add_pcie_port() (Minghuan Lian)
   - Remove unused fields from struct ls_pcie (Minghuan Lian)
   - Add support for LS1043a and LS2080a (Minghuan Lian)
   - Add ls_pcie_msi_host_init() (Minghuan Lian)

  HiSilicon host bridge driver:
   - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang)

  Marvell MVEBU host bridge driver:
   - Return zero for reserved or unimplemented config space (Russell King)
   - Use exact config access size; don't read/modify/write (Russell King)
   - Use of_get_available_child_count() (Russell King)
   - Use for_each_available_child_of_node() to walk child nodes (Russell King)
   - Report full node name when reporting a DT error (Russell King)
   - Use port->name rather than "PCIe%d.%d" (Russell King)
   - Move port parsing and resource claiming to  separate function (Russell King)
   - Fix memory leaks and refcount leaks (Russell King)
   - Split port parsing and resource claiming from  port setup (Russell King)
   - Use gpio_set_value_cansleep() (Russell King)
   - Use devm_kcalloc() to allocate an array (Russell King)
   - Use gpio_desc to carry around gpio (Russell King)
   - Improve clock/reset handling (Russell King)
   - Add PCI Express root complex capability block (Russell King)
   - Remove code restricting accesses to slot 0 (Russell King)

  NVIDIA Tegra host bridge driver:
   - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel)

  Renesas R-Car host bridge driver:
   - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven)
   - Build pcie-rcar.c only on ARM (Geert Uytterhoeven)
   - Make PCI aware of the I/O resources (Phil Edworthy)
   - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy)
   - Set root bus nr to that provided in DT (Phil Edworthy)
   - Fix I/O offset for multiple host bridges (Phil Edworthy)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni)

  Synopsys DesignWare host bridge driver:
   - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma)
   - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni)
   - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni)
   - Require config accesses to be naturally aligned (Gabriele Paoloni)
   - Make "num-lanes" an optional DT property (Gabriele Paoloni)
   - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni)
   - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni)
   - Factor out MSI msg setup (Lucas Stach)
   - Implement multivector MSI IRQ setup (Lucas Stach)
   - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach)
   - Set up high part of MSI target address (Lucas Stach)
   - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang)
   - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang)
   - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang)
   - Make driver arch-agnostic (Zhou Wang)

  Miscellaneous:
   - Make x86 pci_subsys_init() static (Alexander Kuleshov)
   - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)"

* tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: altera: Add Altera PCIe MSI driver
  PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver
  PCI: layerscape: Add ls_pcie_msi_host_init()
  PCI: layerscape: Add support for LS1043a and LS2080a
  PCI: layerscape: Remove unused fields from struct ls_pcie
  PCI: layerscape: Update ls_add_pcie_port()
  PCI: layerscape: Factor out SCFG related function
  PCI: layerscape: Ignore PCIe controllers in Endpoint mode
  PCI: layerscape: Remove ls_pcie_establish_link()
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  ...
2015-11-06 11:29:53 -08:00
Linus Torvalds
6aa2fdb87c Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The irq departement delivers:

   - Rework the irqdomain core infrastructure to accomodate ACPI based
     systems.  This is required to support ARM64 without creating
     artificial device tree nodes.

   - Sanitize the ACPI based ARM GIC initialization by making use of the
     new firmware independent irqdomain core

   - Further improvements to the generic MSI management

   - Generalize the irq migration on CPU hotplug

   - Improvements to the threaded interrupt infrastructure

   - Allow the migration of "chained" low level interrupt handlers

   - Allow optional force masking of interrupts in disable_irq[_nosysnc]

   - Support for two new interrupt chips - Sigh!

   - A larger set of errata fixes for ARM gicv3

   - The usual pile of fixes, updates, improvements and cleanups all
     over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  Document that IRQ_NONE should be returned when IRQ not actually handled
  PCI/MSI: Allow the MSI domain to be device-specific
  PCI: Add per-device MSI domain hook
  of/irq: Use the msi-map property to provide device-specific MSI domain
  of/irq: Split of_msi_map_rid to reuse msi-map lookup
  irqchip/gic-v3-its: Parse new version of msi-parent property
  PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
  of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing
  of/irq: Add support code for multi-parent version of "msi-parent"
  irqchip/gic-v3-its: Add handling of PCI requester id.
  PCI/MSI: Add helper function pci_msi_domain_get_msi_rid().
  of/irq: Add new function of_msi_map_rid()
  Docs: dt: Add PCI MSI map bindings
  irqchip/gic-v2m: Add support for multiple MSI frames
  irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec
  irqchip/mxs: Add Alphascale ASM9260 support
  irqchip/mxs: Prepare driver for hardware with different offsets
  irqchip/mxs: Panic if ioremap or domain creation fails
  irqdomain: Documentation updates
  irqdomain/msi: Use fwnode instead of of_node
  ...
2015-11-03 14:40:01 -08:00
Bjorn Helgaas
c2df02bdaa Merge branches 'pci/host-altera', 'pci/host-designware', 'pci/host-generic', 'pci/host-imx6', 'pci/host-iproc', 'pci/host-mvebu', 'pci/host-rcar', 'pci/host-tegra' and 'pci/host-xgene' into next
* pci/host-altera:
  PCI: altera: Add Altera PCIe MSI driver
  PCI: altera: Add Altera PCIe host controller driver
  ARM: Add msi.h to Kbuild

* pci/host-designware:
  PCI: designware: Make "clocks" and "clock-names" optional DT properties
  PCI: designware: Make driver arch-agnostic
  ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
  PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
  Revert "PCI: designware: Program ATU with untranslated address"
  PCI: designware: Move calculation of bus addresses to DRA7xx
  PCI: designware: Make "num-lanes" an optional DT property
  PCI: designware: Require config accesses to be naturally aligned
  PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
  PCI: designware: Use exact access size in dw_pcie_cfg_read()
  PCI: spear: Fix dw_pcie_cfg_read/write() usage
  PCI: designware: Set up high part of MSI target address
  PCI: designware: Make get_msi_addr() return phys_addr_t, not u32
  PCI: designware: Implement multivector MSI IRQ setup
  PCI: designware: Factor out MSI msg setup
  PCI: Add msi_controller setup_irqs() method for special multivector setup
  PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK

* pci/host-generic:
  PCI: generic: Fix address window calculation for non-zero starting bus
  PCI: generic: Pass starting bus number to pci_scan_root_bus()
  PCI: generic: Allow multiple hosts with different map_bus() methods
  arm64: dts: Drop linux,pci-probe-only from the Seattle DTS
  powerpc/PCI: Fix lookup of linux,pci-probe-only property
  PCI: generic: Fix lookup of linux,pci-probe-only property
  of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only"

* pci/host-imx6:
  PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition
  PCI: imx6: Return real error code from imx6_add_pcie_port()

* pci/host-iproc:
  PCI: iproc: Fix header comment "Corporation" misspelling
  PCI: iproc: Add outbound mapping support
  PCI: iproc: Update PCIe device tree bindings
  PCI: iproc: Improve link detection logic
  PCI: iproc: Fix PCIe reset logic
  PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM
  PCI: iproc: Remove unused struct iproc_pcie.irqs[]
  PCI: iproc: Fix code comment to match code

* pci/host-mvebu:
  PCI: mvebu: Remove code restricting accesses to slot 0
  PCI: mvebu: Add PCI Express root complex capability block
  PCI: mvebu: Improve clock/reset handling
  PCI: mvebu: Use gpio_desc to carry around gpio
  PCI: mvebu: Use devm_kcalloc() to allocate an array
  PCI: mvebu: Use gpio_set_value_cansleep()
  PCI: mvebu: Split port parsing and resource claiming from  port setup
  PCI: mvebu: Fix memory leaks and refcount leaks
  PCI: mvebu: Move port parsing and resource claiming to  separate function
  PCI: mvebu: Use port->name rather than "PCIe%d.%d"
  PCI: mvebu: Report full node name when reporting a DT error
  PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes
  PCI: mvebu: Use of_get_available_child_count()
  PCI: mvebu: Use exact config access size; don't read/modify/write
  PCI: mvebu: Return zero for reserved or unimplemented config space

* pci/host-rcar:
  PCI: rcar: Fix I/O offset for multiple host bridges
  PCI: rcar: Set root bus nr to that provided in DT
  PCI: rcar: Remove dependency on ARM-specific struct hw_pci
  PCI: rcar: Make PCI aware of the I/O resources
  PCI: rcar: Build pcie-rcar.c only on ARM
  PCI: rcar: Build pci-rcar-gen2.c only on ARM

* pci/host-tegra:
  PCI: tegra: Wrap static pgprot_t initializer with __pgprot()

* pci/host-xgene:
  PCI/MSI: xgene: Remove msi_controller assignment
2015-11-03 08:38:27 -06:00
Marc Zyngier
54fa97eeb9 PCI/MSI: Allow the MSI domain to be device-specific
So far, we've always considered that for a given PCI device, its
MSI controller was either set by the architecture-specific
pcibios hook, or simply inherited from the host bridge.

This doesn't cover things like firmware-defined topologies like
msi-map (DT) or IORT (ACPI), which can provide information about
which MSI controller to use on a per-device basis.

This patch adds the necessary hook into the MSI code to allow this
feature, and provides the msi-map functionnality as a first
implementation.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-16 13:07:16 +01:00
David Daney
b6eec9b717 PCI/MSI: Add helper function pci_msi_domain_get_msi_rid().
Add pci_msi_domain_get_msi_rid() to return the MSI requester id (RID).
Initially needed by gic-v3 based systems. It will be used by follow on
patch to drivers/irqchip/irq-gic-v3-its-pci-msi.c

Initially supports mapping the RID via OF device tree.  In the future,
this could be extended to use ACPI _IORT tables as well.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-16 13:07:12 +01:00
Marc Zyngier
0701c53e46 genirq/msi: Do not use pci_msi_[un]mask_irq as default methods
When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS
is set, and that any of .mask or .unmask are NULL in the irq_chip
structure, we set them to pci_msi_[un]mask_irq.

This is a bad idea for at least two reasons:
- PCI_MSI might not be selected, kernel fails to build (yes, this is
  legitimate, at least on arm64!)
- This may not be a PCI/MSI domain at all (platform MSI, for example)

Either way, this looks wrong. Move the overriding of mask/unmask to
the PCI counterpart, and panic is any of these two methods is not
set in the core code (they really should be present).

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-16 12:40:43 +02:00
Romain Bezut
a86760664f PCI/MSI: Export all remapped MSIs to sysfs attributes
irqbalance uses sysfs attributes to populate its internal database, which
is then used to bind the IRQ to the appropriate NUMA node.

On a device accepting multiple MSIs and with interrupt remapping enabled,
only the first IRQ entry is exported in the "msi_irqs" directory.  This
results in irqbalance having no clue of the NUMA affinity for the extra
IRQs, so it can't bind them to the correct node.

Export all MSI interrupts as sysfs attributes when relevant.

[bhelgaas: changelog]
Signed-off-by: Romain Bezut <rbezut@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15 12:17:19 -05:00
Marc Zyngier
be5436c83a irqdomain/msi: Use fwnode instead of of_node
As we continue to push of_node towards the outskirts of irq domains,
let's start tackling the case of msi_create_irq_domain and its little
friends.

This has limited impact in both PCI/MSI, platform MSI, and a few
drivers.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Graeme Gregory <graeme@xora.org.uk>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13 19:01:25 +02:00
Lucas Stach
339e5b44ed PCI: Add msi_controller setup_irqs() method for special multivector setup
Add a msi_controller setup_irqs() method so MSI chip providers can
implement their own multivector MSI setup.

[bhelgaas: changelog]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@gmail.com>
2015-09-18 13:58:34 -05:00
Linus Torvalds
17e6b00ac4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "This updated pull request does not contain the last few GIC related
  patches which were reported to cause a regression.  There is a fix
  available, but I let it breed for a couple of days first.

  The irq departement provides:

   - new infrastructure to support non PCI based MSI interrupts
   - a couple of new irq chip drivers
   - the usual pile of fixlets and updates to irq chip drivers
   - preparatory changes for removal of the irq argument from interrupt
     flow handlers
   - preparatory changes to remove IRQF_VALID"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
  irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
  irqchip: Add documentation for the bcm2836 interrupt controller
  irqchip/bcm2835: Add support for being used as a second level controller
  irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
  PCI: xilinx: Fix typo in function name
  irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
  irqchip/gic: Only allow the primary GIC to set the CPU map
  PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
  unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
  tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
  m68k/irq: Prepare irq handlers for irq argument removal
  C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
  blackfin: Prepare irq handlers for irq argument removal
  arc/irq: Prepare idu_cascade_isr for irq argument removal
  sparc/irq: Use access helper irq_data_get_affinity_mask()
  sparc/irq: Use helper irq_data_get_irq_handler_data()
  parisc/irq: Use access helper irq_data_get_affinity_mask()
  mn10300/irq: Use access helper irq_data_get_affinity_mask()
  irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
  ...
2015-09-01 14:33:35 -07:00
Bjorn Helgaas
9ca678d1df Merge branches 'pci/enumeration' and 'pci/misc' into next
* pci/enumeration:
  PCI: Set MPS to match upstream bridge
  PCI: Move MPS configuration check to pci_configure_device()
  PCI: Drop references acquired by of_parse_phandle()
  PCI/MSI: Remove unused pcibios_msi_controller() hook
  ARM/PCI: Remove msi_controller from struct pci_sys_data
  ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()
  PCI: Add pci_scan_root_bus_msi()
  ARM/PCI: Replace panic with WARN messages on failures
  PCI: generic: Add arm64 support
  PCI: Build setup-irq.o for arm64
  PCI: generic: Remove dependency on ARM-specific struct hw_pci
  ARM/PCI: Set MPS before pci_bus_add_devices()

* pci/misc:
  PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-28 15:53:08 -05:00
Lorenzo Pieralisi
2291ec0902 PCI/MSI: Remove unused pcibios_msi_controller() hook
The pcibios_msi_controller() hook was only implemented by ARM, and it sets
pci_bus->msi now, so it doesn't need this hook anymore.

Remove the unused pcibios_msi_controller() hook.

[bhelgaas: changelog, split into separate patch]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-08-20 12:02:50 -05:00
Jiang Liu
5f2269916b PCI/MSI: Free legacy IRQ when enabling MSI/MSI-X
Once MSI/MSI-X is enabled by the device driver, a PCI device won't use
legacy IRQs again until MSI/MSI-X is disabled.

Call pcibios_free_irq() when enabling MSI/MSI-X and pcibios_alloc_irq()
when disabling MSI/MSI-X.  This allows arch code to manage resources
associated with the legacy IRQ.

[bhelgaas: changelog]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 14:17:28 -05:00
Marc Zyngier
f075915ac0 PCI/MSI: Drop domain field from msi_controller
The only three users of that field are not using the msi_controller
structure anymore, so drop it altogether.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Ma Jun <majun258@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Duc Dang <dhdang@apm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438091186-10244-20-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 00:14:39 +02:00
Marc Zyngier
d8a1cb7575 PCI/MSI: Let pci_msi_get_domain use struct device::msi_domain
Now that we can easily find which MSI domain a PCI device is
using, use dev_get_msi_domain as a way to retrieve the information.

The original code is still used as a fallback.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Ma Jun <majun258@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Duc Dang <dhdang@apm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438091186-10244-8-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 00:14:37 +02:00
Marc Zyngier
0380839dc9 PCI/MSI: Register irq domain with specific token
When creating a PCI/MSI domain, tag it with DOMAIN_BUS_PCI_MSI so
that it can be looked-up using irq_find_matching_host().

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Yijing Wang <wangyijing@huawei.com>
Cc: Ma Jun <majun258@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Duc Dang <dhdang@apm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438091186-10244-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30 00:14:37 +02:00
Jiang Liu
aa48b6f708 genirq/MSI: Move alloc_msi_entry() from PCI into generic MSI code
Move alloc_msi_entry() from PCI MSI code into generic MSI code, so it
can be reused by other generic MSI drivers.  Also introduce
free_msi_entry() for completeness.

Suggested-by: Stuart Yoder <stuart.yoder@freescale.com>.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:44 +02:00
Jiang Liu
25a98bd4ff genirq/MSI: Store 'struct device' instead of 'struct pci_dev' in struct msi_desc
Store 'struct device *' instead of 'struct pci_dev *' in struct msi_desc,
so struct msi_desc can be reused by non PCI based MSI drivers.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-11-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:43 +02:00
Jiang Liu
4a7cc83167 genirq/MSI: Move msi_list from struct pci_dev to struct device
Move msi_list from struct pci_dev into struct device, so we can
support non-PCI-device based generic MSI interrupts.

msi_list is now conditional under CONFIG_GENERIC_MSI_IRQ, which is
selected from CONFIG_PCI_MSI, so no functional change for PCI MSI
users.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/1436428847-8886-10-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:43 +02:00
Jiang Liu
e39758e0ea PCI: Use helper functions to access fields in struct msi_desc
Use helper functions to access fields in struct msi_desc, so we could
easily refine msi_desc later.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com>
Cc: Srikanth Thokala <sthokal@xilinx.com>
Cc: Rob Herring <robh@kernel.org>
Link: http://lkml.kernel.org/r/1436428847-8886-9-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:43 +02:00
Jiang Liu
5004e98a91 PCI: Use for_each_pci_msi_entry() to access MSI device list
Use accessor for_each_pci_msi_entry() to access MSI device list, so we
could easily move msi_list from struct pci_dev into struct device
later.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Link: http://lkml.kernel.org/r/1436428847-8886-7-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22 18:37:43 +02:00