'Pipe CSC enable' bit is more than just deprecated in ICL+, it was
disabled in commit 077ef1f09c ("drm/i915/icl: Don't set pipe
CSC/Gamma in PLANE_COLOR_CTL") for primary and sprite planes as it was
causing those planes to be rendered as always black but it was not
disabled in cursor plane, also causing it to be rendered as black.
As mentioned in the commit referenced above, this is a workaround
too and the CSC and gamma per plane values needs to be setup before
enable CSC and gamma again.
BSpec: 4278 and 7635
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518201547.15793-1-jose.souza@intel.com
The power sequencer has bits to allow DP C to be used for eDP.
Currently we assume this will never happen, but I guess it could
theoretically be a thing. Make the code do the right thing in that
case, and toss in a MISSING_CASE() for any other port.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Clean up the DP pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state(),
the port state asserts, and the VLV power sequencer code.
v2: Return PIPE_A for cpt/ppt when the port isn't selected by
any transcoder. Returning INVALID_PIPE explodes *somewhere*
on some machines (can't immediately see where though). This
now matches the old behaviour.
v3: Order the defines shift,mask,value (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
for_each_encoder_on_crtc() is legacy and shouldn't be used by atomic
drivers. Let's throw out intel_trans_dp_port_sel() and replace it
with intel_get_crtc_new_encoder() which looks the atomic state instead.
Since we now have to call intel_get_crtc_new_encoder() during the commit
phase we'll need to plumb in the top level atomic state. The
crtc_state->state pointers are no longer valid at that point.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
nospec quite reasonably asserts that it will never be used with an index
larger than unsigned long (that being the largest possibly index into an
C array). However, our ubi uses the convention of u64 for any large
integer, running afoul of the assertion on 32b. Reduce our index to an
unsigned long, checking for type overflow first.
drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl':
include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
Reported-by: kbuild-all@01.org
Fixes: 84b510e22d ("drm/i915/query: Protect tainted function pointer lookup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
Replace dev_priv->vbt.edp.support with
dev_priv->vbt.int_lvds_support. We'll want to extend its
use beyond the LVDS vs. eDP case in the future.
v2: Nuke the edp.support from parse_edp() (Jani)
Only clear int_lvds_support for gen5+ to preserve
the current behaviour (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508140814.20105-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
As we handle the allocation failure of the page directory and tables by
propagating the failure back to userspace, allow it to fail if direct
reclaim is unable to satisfy the request (i.e. disable the oomkiller).
The premise being that if we are unable to allocate a single page for
the pagetable, we will not be able to handle the multitude of pages
required for the gfx operation and we should back off to allow the
system to recover.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106609
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522083643.29601-1-chris@chris-wilson.co.uk
Smatch identifies i915_query_ioctl() as being a potential victim of
Spectre due to its use of a tainted user index into a function pointer
array. Use array_index_nospec() to defang the user index before using it
to lookup the function pointer.
Fixes: a446ae2c6e ("drm/i915: add query uAPI")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521210530.26008-1-chris@chris-wilson.co.uk
This reverts commit dc911f5bd8.
Per the report, no matter what display mode you select with xrandr, the
i915 driver will always select the alternate fixed mode. For the
reporter this means that the display will always run at 40Hz which is
quite annoying. This may be due to the mode comparison.
But there are some other potential issues. The choice of alt_fixed_mode
seems dubious. It's the first non-preferred mode, but there are no
guarantees that the only difference would be refresh rate. Similarly,
there may be more than one preferred mode in the probed modes list, and
the commit changes the preferred mode selection to choose the last one
on the list instead of the first.
(Note that the probed modes list is the raw, unfiltered, unsorted list
of modes from drm_add_edid_modes(), not the pretty result after a
drm_helper_probe_single_connector_modes() call.)
Finally, we already have eerily similar code in place to find the
downclock mode for DRRS that seems like could be reused here.
Back to the drawing board.
Note: This is a hand-crafted revert due to conflicts. If it fails to
backport, please just try reverting the original commit directly.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469
Reported-by: Rune Petersen <rune@megahurts.dk>
Reported-by: Mark Spencer <n7u4722r35@ynzlx.anonbox.net>
Fixes: dc911f5bd8 ("drm/i915/edp: Allow alternate fixed mode for eDP if available.")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516080110.22770-1-jani.nikula@intel.com
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass.
v2: Only hold a single reference per framebuffer, not per plane. (Ville)
v3: Drop NULL check in intel_fb_obj. (Ville)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180518143008.4120-2-daniels@collabora.com
We already have a macro to pull the GEM object from a FB, so use it
everywhere. We'll make use of this later to move the object storage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180518143008.4120-1-daniels@collabora.com
When we do shadowing, workload's request might not be allocated yet,
so we still require shadow context's object. And when complete workload,
delay to zero workload's request pointer after used for update guest context.
v2: Move request alloc earlier as already try to track shadow status
depending on request state, which also facilitate to use request->hw_context
for target engine context reference.
Fixes: 1fc44d9b1a ("drm/i915: Store a pointer to intel_context in i915_request")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521081752.31056-1-zhenyuw@linux.intel.com
When testing reset, we wait for 1s on the main thread for the hang to
start. Meanwhile, we continue submitting requests on all the background
threads, and we may have more threads than cores and so potentially
starve the waiter from being woken within the timeout. As the hang
timeout and the active timeouts are the same, it is hard to distinguish
which caused the timeout. Bump the active thread timeouts to 5s,
compared to the 1s timeout for the hang, so that we preferentially
report the hang timing out, while hopefully ensuring that we do at least
wake up the hang thread first before declaring the background active
timeout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517142442.16979-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In order to support engine reset from irq (timer) context, we need to be
able to re-initialise the breadcrumbs. So we need to promote the plain
spin_lock_irq to a safe spin_lock_irqsave.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-3-chris@chris-wilson.co.uk
We want to be able to reset the GPU from inside a timer callback
(hardirq context). One step requires us to copy the default context
state over to the guilty context, which means we need to plan in advance
to have that object accessible from within an atomic context. The atomic
context prevents us from pinning the object or from peeking into the
shmemfs backing store (all may sleep), so we choose to pin the
default_state into memory when the engine becomes active. This
compromise allows us to swap out the default state when idle, when
required.
References: 5692251c25 ("drm/i915/lrc: Scrub the GPU state of the guilty hanging request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-2-chris@chris-wilson.co.uk
To be useful later, enable intel_engine_dump() to be called from irq
context (i.e. using saving and restoring irq start rather than assuming
we enter with irqs enabled).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-1-chris@chris-wilson.co.uk
We rely on ksoftirqd to run in a timely fashion in order to drain the
execlists queue. Quite frequently, it does not. In some cases we may see
latencies of over 200ms triggering our idle timeouts and forcing us to
declare the driver wedged!
Thus we can speed up idle detection by bypassing ksoftirqd in these
cases and flush our tasklet to confirm if we are indeed still waiting
for the ELSP to drain.
v2: Put the execlists.first check back; it is required for handling
reset!
References: https://bugs.freedesktop.org/show_bug.cgi?id=106373
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180506171328.30034-1-chris@chris-wilson.co.uk
Almost all of the GEN7 checks in the DP code are actually looking for
IVB. HSW doesn't even take these codepaths, and VLV is excluded on
account of not having port A. So let's change the checks to IS_IVB to
make the code less confusing.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-3-ville.syrjala@linux.intel.com
All DDI platforms support the full set of preemph settings for each
supported vswing, so let's use the same code for them. We'll also move
the code into intel_ddi.c so that it sits closer to the actual buf trans
tables.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use intel_ddi_dp_voltage_max() for HSW/BDW too instead of letting these
fall through the if ladder in a weird way. This function will look at
the actual buf trans tables we have for HSW/BDW to determine the max
vswing level.
It looks to me like the current code leads HSW port A down the IVB port
A path, HSW port B+ and BDW fall through to the very end. Both cases do
result in the correct max vswing level 2, but it's very hard to see that
from the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
As all backends implement the same pin_count mechanism and do a
dec-and-test as their first step, pull that into the common
intel_context_unpin(). This also pulls into the caller, eliminating the
indirect call in the usual steady state case. The intel_context_pin()
side is a little more complicated as it combines the lookup/alloc as
well as pinning the state, and so is left for a later date.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-4-chris@chris-wilson.co.uk
To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.
v2: Set mock_context->ops so we don't crash and burn in selftests.
Cleanups from Tvrtko.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk
In the next patch, we want to store the intel_context pointer inside
i915_request, as it is frequently access via a convoluted dance when
submitting the request to hw. Having two context pointers inside
i915_request leads to confusion so first rename the existing
i915_gem_context pointer to i915_request.gem_context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-1-chris@chris-wilson.co.uk
For all platforms that run haswell_crtc_enable, our spec tells us to
configure the transcoder clocks and do link training before it tells
us to set pipeconf and the other pipe/transcoder/plane registers.
Starting from Icelake, we get machine hangs if we try to touch the
pipe/transcoder registers without having the clocks configured and not
having some chicken bits set. So this patch changes
haswell_crtc_enable() to issue the calls at the appropriate order
mandated by the spec.
While setting the appropriate chicken bits would also work here, it's
better if we actually program the hardware the way it is intended to
be programmed. And the chicken bit also has some theoretical downsides
that may or may not affect us. Also, correctly programming the
hardware does not prevent us from setting the chicken bits in a later
patch in case we decide to.
v2: Don't forget link training (Ville).
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502215851.30736-1-paulo.r.zanoni@intel.com
Stop reading some now deprecated interrupt registers in both
debugfs and error state. Instead, read the new equivalents in the
Gen11 interrupt repartitioning scheme.
Note that the equivalent to the PM ISR & IIR cannot be read without
affecting the current state of the system, so I've opted for leaving
them out. See gen11_reset_one_iir() for more info.
v2: else if !!! (Paulo)
v3: another else if (Vinay)
v4:
- Rebased
- Renamed patch
- Improved the ordering of GENs
- Improved the printing of per-GEN info
v5: Avoid maybe-unitialized & add comment explaining the lack
of PM ISR & IIR
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
[Paulo: fix commit message and coding style.]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525989595-18220-1-git-send-email-oscar.mateo@intel.com
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e33 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!
References: 41736a8e33 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk
Make sure that when we don't have any scheduler attributes for the
request, the string is terminated.
Fixes: 247870ac8e ("drm/i915: Build request info on stack before printk")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517152824.11619-1-chris@chris-wilson.co.uk
The HWACK bit more generically solves the problem of resubmitting ESLP
while the hardware is still processing the current ELSP write. We no
longer need to check port[0].count itself.
References: ba74cb10c7 ("drm/i915/execlists: Delay writing to ELSP until HW has processed the previous write")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517115647.17205-1-chris@chris-wilson.co.uk
Parametrize the DVO pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-5-ville.syrjala@linux.intel.com
Parametrize the TV pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
v2: Order the defines shift,mask,value (Jani)
Clear the stale pipe select bit in load detection (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-4-ville.syrjala@linux.intel.com
Clean up the SDVO pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-3-ville.syrjala@linux.intel.com
Clean up the LVDS pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Drop ruperfluous braces and whitesapce changes (Jani)
Combine masks in compute_is_dual_link_lvds() (Jani)
v3: Fix LVDS_PIPE_SEL_MASK_CPT
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514182827.28629-1-ville.syrjala@linux.intel.com
Clean up the ADPA pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-1-ville.syrjala@linux.intel.com
We cannot call kthread_park() from softirq context, so let's avoid it
entirely during the reset. We wanted to suspend the signaler so that it
would not mark a request as complete at the same time as we marked it as
being in error. Instead of parking the signaling, stop the engine from
advancing so that the GPU doesn't emit the breadcrumb for our chosen
"guilty" request.
v2: Refactor setting STOP_RING so that we don't have the same code thrice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michałt Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-8-chris@chris-wilson.co.uk
Catch up with the inflight CSB events, after disabling the tasklet
before deciding which request was truly guilty of hanging the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-7-chris@chris-wilson.co.uk
Pull the CSB event processing into its own routine so that we can reuse
it during reset to flush any missed interrupts/events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-6-chris@chris-wilson.co.uk
In the next patch, we will make the execlists reset prepare callback
take into account preemption by flushing the context-switch handler.
This is not applicable to the GuC submission backend, so split the two
into their own backend callbacks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-5-chris@chris-wilson.co.uk
In preparation to more carefully handling incomplete preemption during
reset by execlists, we move the existing code wholesale to the backends
under a couple of new reset vfuncs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-4-chris@chris-wilson.co.uk
As a complement to inject_preempt_context(), follow up with the function
to handle its completion. This will be useful should we wish to extend
the duties of the preempt-context for execlists.
v2: And do the same for the guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-3-chris@chris-wilson.co.uk
