Commit Graph

31902 Commits

Author SHA1 Message Date
Andrew Jeffery
e654f19165 dt-bindings: watchdog: aspeed: External reset signal properties
For the AST2500 and compatible watchdog controllers the external reset
signal can be configured for push-pull or open-drain drive types, and in
the case of push-pull driving, active low or high.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 21:05:04 +02:00
Christopher Bostic
ffbb29d62d drivers/watchdog: Add optional ASPEED device tree properties
Describe device tree optional properties:

  * aspeed,reset-type = "cpu|soc|system|none"
     One of three different, mutually exclusive, values

	"cpu" : ARM CPU reset on signal
	"soc" : 'System on chip' reset
	"system" : Full system reset

     The value can also be set to "none" which indicates that no
     reset of any kind is to be done via this watchdog.  This assumes
     another watchdog on the chip is to take care of resets.

  * aspeed,external-signal - Generate external signal (WDT1 and WDT2 only)
  * aspeed,alt-boot - Boot from alternate block on signal

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 21:05:02 +02:00
Sean Wang
e8a7fc711c dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC
This updates dt-binding documentation for MediaTek MT7622 and
MT7623 SoC. For the both SoCs supported all rely on the fallback
binding of the case with "mediatek,mt6589-wdt".

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 20:42:53 +02:00
Martin Blumenstingl
43a64e81b2 watchdog: meson-wdt: add support for the watchdog on Meson8 and Meson8m2
The watchdog IP block on Meson8 and Meson8m2 is already supported by the
existing meson-wdt driver. Meson8 uses the same register bits as Meson6,
while the newer Meson8m2 SoC uses the same register bits as Meson8b.

Currently watchdog support on Meson8 SoC already works because
meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a
separate compatible for Meson8 makes this more explicit though.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 20:14:01 +02:00
Linus Torvalds
fbd01410e8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "The iwlwifi firmware compat fix is in here as well as some other
  stuff:

  1) Fix request socket leak introduced by BPF deadlock fix, from Eric
     Dumazet.

  2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg.

  3) Missing __qdisc_drop conversions in prio and qfq schedulers, from
     Gao Feng.

  4) Use after free in netlink nlk groups handling, from Xin Long.

  5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long.

  6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca
     with follow-on fix from Eric Dumazet.

  7) Need RCU and preemption disabled during generic XDP data patch,
     from John Fastabend"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  bpf: make error reporting in bpf_warn_invalid_xdp_action more clear
  Revert "mdio_bus: Remove unneeded gpiod NULL check"
  bpf: devmap, use cond_resched instead of cpu_relax
  bpf: add support for sockmap detach programs
  net: rcu lock and preempt disable missing around generic xdp
  bpf: don't select potentially stale ri->map from buggy xdp progs
  net: tulip: Constify tulip_tbl
  net: ethernet: ti: netcp_core: no need in netif_napi_del
  davicom: Display proper debug level up to 6
  net: phy: sfp: rename dt properties to match the binding
  dt-binding: net: sfp binding documentation
  dt-bindings: add SFF vendor prefix
  dt-bindings: net: don't confuse with generic PHY property
  ip6_tunnel: fix setting hop_limit value for ipv6 tunnel
  ip_tunnel: fix setting ttl and tos value in collect_md mode
  ipv6: fix typo in fib6_net_exit()
  tcp: fix a request socket leak
  sctp: fix missing wake ups in some situations
  netfilter: xt_hashlimit: fix build error caused by 64bit division
  netfilter: xt_hashlimit: alloc hashtable with right size
  ...
2017-09-09 11:05:20 -07:00
Linus Torvalds
fbf4432ff7 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - most of the rest of MM

 - a small number of misc things

 - lib/ updates

 - checkpatch

 - autofs updates

 - ipc/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
  ipc: optimize semget/shmget/msgget for lots of keys
  ipc/sem: play nicer with large nsops allocations
  ipc/sem: drop sem_checkid helper
  ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t
  ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t
  ipc: convert ipc_namespace.count from atomic_t to refcount_t
  kcov: support compat processes
  sh: defconfig: cleanup from old Kconfig options
  mn10300: defconfig: cleanup from old Kconfig options
  m32r: defconfig: cleanup from old Kconfig options
  drivers/pps: use surrounding "if PPS" to remove numerous dependency checks
  drivers/pps: aesthetic tweaks to PPS-related content
  cpumask: make cpumask_next() out-of-line
  kmod: move #ifdef CONFIG_MODULES wrapper to Makefile
  kmod: split off umh headers into its own file
  MAINTAINERS: clarify kmod is just a kernel module loader
  kmod: split out umh code into its own file
  test_kmod: flip INT checks to be consistent
  test_kmod: remove paranoid UINT_MAX check on uint range processing
  vfat: deduplicate hex2bin()
  ...
2017-09-09 10:30:07 -07:00
Wim Van Sebroeck
fc61e83a29 watchdog: Revert "iTCO_wdt: all versions count down twice"
This reverts commit 1fccb73011.
Reported as Bug 196509 - iTCO_wdt regression reboot before timeout expire

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09 17:41:24 +02:00
Baruch Siach
3ef3714000 dt-binding: net: sfp binding documentation
Add device-tree binding documentation SFP transceivers. Support for SFP
transceivers has been recently introduced (drivers/net/phy/sfp.c).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 20:51:17 -07:00
Baruch Siach
165da35857 dt-bindings: add SFF vendor prefix
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 20:51:17 -07:00
Baruch Siach
c43593d81a dt-bindings: net: don't confuse with generic PHY property
This complements commit 9a94b3a4bd (dt-binding: phy: don't confuse with
Ethernet phy properties).

The generic PHY 'phys' property sometime appears in the same node with
the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in
ethernet.txt to reduce confusion.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-08 20:49:42 -07:00
Robert P. J. Day
a2d8180301 drivers/pps: aesthetic tweaks to PPS-related content
Collection of aesthetic adjustments to various PPS-related files,
directories and Documentation, some quite minor just for the sake of
consistency, including:

 * Updated example of pps device tree node (courtesy Rodolfo G.)
 * "PPS-API" -> "PPS API"
 * "pps_source_info_s" -> "pps_source_info"
 * "ktimer driver" -> "pps-ktimer driver"
 * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example
 * Add missing PPS-related entries to MAINTAINERS file
 * Other trivialities

Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomain
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:51 -07:00
Davidlohr Bueso
cd9e61ed1e rbtree: cache leftmost node internally
Patch series "rbtree: Cache leftmost node internally", v4.

A series to extending rbtrees to internally cache the leftmost node such
that we can have fast overlap check optimization for all interval tree
users[1].  The benefits of this series are that:

(i)   Unify users that do internal leftmost node caching.
(ii)  Optimize all interval tree users.
(iii) Convert at least two new users (epoll and procfs) to the new interface.

This patch (of 16):

Red-black tree semantics imply that nodes with smaller or greater (or
equal for duplicates) keys always be to the left and right,
respectively.  For the kernel this is extremely evident when considering
our rb_first() semantics.  Enabling lookups for the smallest node in the
tree in O(1) can save a good chunk of cycles in not having to walk down
the tree each time.  To this end there are a few core users that
explicitly do this, such as the scheduler and rtmutexes.  There is also
the desire for interval trees to have this optimization allowing faster
overlap checking.

This patch introduces a new 'struct rb_root_cached' which is just the
root with a cached pointer to the leftmost node.  The reason why the
regular rb_root was not extended instead of adding a new structure was
that this allows the user to have the choice between memory footprint
and actual tree performance.  The new wrappers on top of the regular
rb_root calls are:

 - rb_first_cached(cached_root) -- which is a fast replacement
     for rb_first.

 - rb_insert_color_cached(node, cached_root, new)

 - rb_erase_cached(node, cached_root)

In addition, augmented cached interfaces are also added for basic
insertion and deletion operations; which becomes important for the
interval tree changes.

With the exception of the inserts, which adds a bool for updating the
new leftmost, the interfaces are kept the same.  To this end, porting rb
users to the cached version becomes really trivial, and keeping current
rbtree semantics for users that don't care about the optimization
requires zero overhead.

Link: http://lkml.kernel.org/r/20170719014603.19029-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:48 -07:00
Jérôme Glisse
bffc33ec53 hmm: heterogeneous memory management documentation
Patch series "HMM (Heterogeneous Memory Management)", v25.

Heterogeneous Memory Management (HMM) (description and justification)

Today device driver expose dedicated memory allocation API through their
device file, often relying on a combination of IOCTL and mmap calls.
The device can only access and use memory allocated through this API.
This effectively split the program address space into object allocated
for the device and useable by the device and other regular memory
(malloc, mmap of a file, share memory, â) only accessible by
CPU (or in a very limited way by a device by pinning memory).

Allowing different isolated component of a program to use a device thus
require duplication of the input data structure using device memory
allocator.  This is reasonable for simple data structure (array, grid,
image, â) but this get extremely complex with advance data
structure (list, tree, graph, â) that rely on a web of memory
pointers.  This is becoming a serious limitation on the kind of work
load that can be offloaded to device like GPU.

New industry standard like C++, OpenCL or CUDA are pushing to remove
this barrier.  This require a shared address space between GPU device
and CPU so that GPU can access any memory of a process (while still
obeying memory protection like read only).  This kind of feature is also
appearing in various other operating systems.

HMM is a set of helpers to facilitate several aspects of address space
sharing and device memory management.  Unlike existing sharing mechanism
that rely on pining pages use by a device, HMM relies on mmu_notifier to
propagate CPU page table update to device page table.

Duplicating CPU page table is only one aspect necessary for efficiently
using device like GPU.  GPU local memory have bandwidth in the TeraBytes/
second range but they are connected to main memory through a system bus
like PCIE that is limited to 32GigaBytes/second (PCIE 4.0 16x).  Thus it
is necessary to allow migration of process memory from main system memory
to device memory.  Issue is that on platform that only have PCIE the
device memory is not accessible by the CPU with the same properties as
main memory (cache coherency, atomic operations, ...).

To allow migration from main memory to device memory HMM provides a set of
helper to hotplug device memory as a new type of ZONE_DEVICE memory which
is un-addressable by CPU but still has struct page representing it.  This
allow most of the core kernel logic that deals with a process memory to
stay oblivious of the peculiarity of device memory.

When page backing an address of a process is migrated to device memory the
CPU page table entry is set to a new specific swap entry.  CPU access to
such address triggers a migration back to system memory, just like if the
page was swap on disk.  HMM also blocks any one from pinning a ZONE_DEVICE
page so that it can always be migrated back to system memory if CPU access
it.  Conversely HMM does not migrate to device memory any page that is pin
in system memory.

To allow efficient migration between device memory and main memory a new
migrate_vma() helpers is added with this patchset.  It allows to leverage
device DMA engine to perform the copy operation.

This feature will be use by upstream driver like nouveau mlx5 and probably
other in the future (amdgpu is next suspect in line).  We are actively
working on nouveau and mlx5 support.  To test this patchset we also worked
with NVidia close source driver team, they have more resources than us to
test this kind of infrastructure and also a bigger and better userspace
eco-system with various real industry workload they can be use to test and
profile HMM.

The expected workload is a program builds a data set on the CPU (from
disk, from network, from sensors, â).  Program uses GPU API (OpenCL,
CUDA, ...) to give hint on memory placement for the input data and also
for the output buffer.  Program call GPU API to schedule a GPU job, this
happens using device driver specific ioctl.  All this is hidden from
programmer point of view in case of C++ compiler that transparently
offload some part of a program to GPU.  Program can keep doing other stuff
on the CPU while the GPU is crunching numbers.

It is expected that CPU will not access the same data set as the GPU while
GPU is working on it, but this is not mandatory.  In fact we expect some
small memory object to be actively access by both GPU and CPU concurrently
as synchronization channel and/or for monitoring purposes.  Such object
will stay in system memory and should not be bottlenecked by system bus
bandwidth (rare write and read access from both CPU and GPU).

As we are relying on device driver API, HMM does not introduce any new
syscall nor does it modify any existing ones.  It does not change any
POSIX semantics or behaviors.  For instance the child after a fork of a
process that is using HMM will not be impacted in anyway, nor is there any
data hazard between child COW or parent COW of memory that was migrated to
device prior to fork.

HMM assume a numbers of hardware features.  Device must allow device page
table to be updated at any time (ie device job must be preemptable).
Device page table must provides memory protection such as read only.
Device must track write access (dirty bit).  Device must have a minimum
granularity that match PAGE_SIZE (ie 4k).

Reviewer (just hint):
Patch 1  HMM documentation
Patch 2  introduce core infrastructure and definition of HMM, pretty
         small patch and easy to review
Patch 3  introduce the mirror functionality of HMM, it relies on
         mmu_notifier and thus someone familiar with that part would be
         in better position to review
Patch 4  is an helper to snapshot CPU page table while synchronizing with
         concurrent page table update. Understanding mmu_notifier makes
         review easier.
Patch 5  is mostly a wrapper around handle_mm_fault()
Patch 6  add new add_pages() helper to avoid modifying each arch memory
         hot plug function
Patch 7  add a new memory type for ZONE_DEVICE and also add all the logic
         in various core mm to support this new type. Dan Williams and
         any core mm contributor are best people to review each half of
         this patchset
Patch 8  special case HMM ZONE_DEVICE pages inside put_page() Kirill and
         Dan Williams are best person to review this
Patch 9  allow to uncharge a page from memory group without using the lru
         list field of struct page (best reviewer: Johannes Weiner or
         Vladimir Davydov or Michal Hocko)
Patch 10 Add support to uncharge ZONE_DEVICE page from a memory cgroup (best
         reviewer: Johannes Weiner or Vladimir Davydov or Michal Hocko)
Patch 11 add helper to hotplug un-addressable device memory as new type
         of ZONE_DEVICE memory (new type introducted in patch 3 of this
         serie). This is boiler plate code around memory hotplug and it
         also pick a free range of physical address for the device memory.
         Note that the physical address do not point to anything (at least
         as far as the kernel knows).
Patch 12 introduce a new hmm_device class as an helper for device driver
         that want to expose multiple device memory under a common fake
         device driver. This is usefull for multi-gpu configuration.
         Anyone familiar with device driver infrastructure can review
         this. Boiler plate code really.
Patch 13 add a new migrate mode. Any one familiar with page migration is
         welcome to review.
Patch 14 introduce a new migration helper (migrate_vma()) that allow to
         migrate a range of virtual address of a process using device DMA
         engine to perform the copy. It is not limited to do copy from and
         to device but can also do copy between any kind of source and
         destination memory. Again anyone familiar with migration code
         should be able to verify the logic.
Patch 15 optimize the new migrate_vma() by unmapping pages while we are
         collecting them. This can be review by any mm folks.
Patch 16 add unaddressable memory migration to helper introduced in patch
         7, this can be review by anyone familiar with migration code
Patch 17 add a feature that allow device to allocate non-present page on
         the GPU when migrating a range of address to device memory. This
         is an helper for device driver to avoid having to first allocate
         system memory before migration to device memory
Patch 18 add a new kind of ZONE_DEVICE memory for cache coherent device
         memory (CDM)
Patch 19 add an helper to hotplug CDM memory

Previous patchset posting :
v1 http://lwn.net/Articles/597289/
v2 https://lkml.org/lkml/2014/6/12/559
v3 https://lkml.org/lkml/2014/6/13/633
v4 https://lkml.org/lkml/2014/8/29/423
v5 https://lkml.org/lkml/2014/11/3/759
v6 http://lwn.net/Articles/619737/
v7 http://lwn.net/Articles/627316/
v8 https://lwn.net/Articles/645515/
v9 https://lwn.net/Articles/651553/
v10 https://lwn.net/Articles/654430/
v11 http://www.gossamer-threads.com/lists/linux/kernel/2286424
v12 http://www.kernelhub.org/?msg=972982&p=2
v13 https://lwn.net/Articles/706856/
v14 https://lkml.org/lkml/2016/12/8/344
v15 http://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1304107.html
v16 http://www.spinics.net/lists/linux-mm/msg119814.html
v17 https://lkml.org/lkml/2017/1/27/847
v18 https://lkml.org/lkml/2017/3/16/596
v19 https://lkml.org/lkml/2017/4/5/831
v20 https://lwn.net/Articles/720715/
v21 https://lkml.org/lkml/2017/4/24/747
v22 http://lkml.iu.edu/hypermail/linux/kernel/1705.2/05176.html
v23 https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1404788.html
v24 https://lwn.net/Articles/726691/

This patch (of 19):

This adds documentation for HMM (Heterogeneous Memory Management).  It
presents the motivation behind it, the features necessary for it to be
useful and and gives an overview of how this is implemented.

Link: http://lkml.kernel.org/r/20170817000548.32038-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08 18:26:45 -07:00
Linus Torvalds
0e271fd59f platform-drivers-x86 for v4.14-1
Several fixes from static analysis and message noise reduction. Correct
 WMI core and related drivers to evaluate instance number 0x0 in
 accordance with the documentation. Add intel-telemetry support for
 Gemini Lake. Various individual driver fixes noted below.
 
 Two commits appear here which were previously merged during the 4.13 RC
 cycle:
 - baa5480b05 platform/x86: dell-wmi: Fix driver interface version query
 - c801603e6d platform/x86: intel-vbtn: match power button on press rather than release
 
 dell-wmi:
  - Update dell_wmi_check_descriptor_buffer() to new model
 
 intel-vbtn:
  - reduce unnecessary messages for normal users
  - match power button on press rather than release
 
 intel-hid:
  - reduce unnecessary messages for normal users
 
 thinkpad_acpi:
  - Fix warning about deprecated hwmon_device_register
 
 wmi:
  - Fix check for method instance number
 
 ideapad-laptop:
  - Expose conservation mode switch
 
 intel_pmc_core:
  - Make the driver PCH family agnostic
 
 peaq-wmi:
  - Evaluate wmi method with instance number 0x0
  - silence a static checker warning
 
 mxm-wmi:
  - Evaluate wmi method with instance number 0x0
 
 asus-wmi:
  - Evaluate wmi method with instance number 0x0
 
 intel_scu_ipc:
  - make intel_scu_ipc_pdata_t const
 
 intel_mid_powerbtn:
  - make mid_pb_ddata const
  - fix error return code in mid_pb_probe()
 
 hp-wmi:
  - Remove unused macro helper
  - Correctly determine method id in WMI calls
 
 dell-wmi:
  - Fix driver interface version query
 
 intel_telemetry:
  - remove redundant macro definition
  - Add GLK PSS Event Table
 
 alienware-wmi:
  - fix format string overflow warning
 
 ibm_rtl:
  - remove unnecessary static in ibm_rtl_write()
 
 msi-wmi:
  - remove unnecessary static in msi_wmi_notify()
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZsvdiAAoJEKbMaAwKp364V+UIAI27WP1MKQ6zKiXAt6TTLQww
 RGbeTrgxsHwxIp1ioo3MZtRa4uTMrJ/A/Es7nzZBSAAp8qPLOCaZYGtsH0tYkzcc
 zGLw+q5EBEjiMiq8WvkgD+NLq6icdsB0MUuuh06y34/LWiOwpp9wNemszHO9Vo2/
 vc5PkgNmMx5K4zJvl6A3JAY98XlXxG65vYMrsIL17EFwZjuixrcCjDY86HKxEnNV
 tmfJ1Mhiu5HnDniCgRubdRBo4LwAeRdrXXkrsTZip+4RuXvm0gvxHujwgllIY4Ns
 m6xFXQApaGtXxd9vcSBHXE7whTgWrb7yPhUQzgt/Dd3E6ywF2THfn5jvwJUEflc=
 =LuAp
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Several fixes from static analysis and message noise reduction.
  Correct WMI core and related drivers to evaluate instance number 0x0
  in accordance with the documentation. Add intel-telemetry support for
  Gemini Lake. Various individual driver fixes noted below.

  dell-wmi:
   - Update dell_wmi_check_descriptor_buffer() to new model

  intel-vbtn:
   - reduce unnecessary messages for normal users
   - match power button on press rather than release

  intel-hid:
   - reduce unnecessary messages for normal users

  thinkpad_acpi:
   - Fix warning about deprecated hwmon_device_register

  wmi:
   - Fix check for method instance number

  ideapad-laptop:
   - Expose conservation mode switch

  intel_pmc_core:
   - Make the driver PCH family agnostic

  peaq-wmi:
   - Evaluate wmi method with instance number 0x0
   - silence a static checker warning

  mxm-wmi:
   - Evaluate wmi method with instance number 0x0

  asus-wmi:
   - Evaluate wmi method with instance number 0x0

  intel_scu_ipc:
   - make intel_scu_ipc_pdata_t const

  intel_mid_powerbtn:
   - make mid_pb_ddata const
   - fix error return code in mid_pb_probe()

  hp-wmi:
   - Remove unused macro helper
   - Correctly determine method id in WMI calls

  dell-wmi:
   - Fix driver interface version query

  intel_telemetry:
   - remove redundant macro definition
   - Add GLK PSS Event Table

  alienware-wmi:
   - fix format string overflow warning

  ibm_rtl:
   - remove unnecessary static in ibm_rtl_write()

  msi-wmi:
   - remove unnecessary static in msi_wmi_notify()"

* tag 'platform-drivers-x86-v4.14-1' of git://git.infradead.org/linux-platform-drivers-x86: (23 commits)
  platform/x86: dell-wmi: Update dell_wmi_check_descriptor_buffer() to new model
  platform/x86: intel-vbtn: reduce unnecessary messages for normal users
  platform/x86: intel-hid: reduce unnecessary messages for normal users
  platform/x86: thinkpad_acpi: Fix warning about deprecated hwmon_device_register
  platform/x86: wmi: Fix check for method instance number
  platform/x86: ideapad-laptop: Expose conservation mode switch
  platform/x86: intel_pmc_core: Make the driver PCH family agnostic
  platform/x86: peaq-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: mxm-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: asus-wmi: Evaluate wmi method with instance number 0x0
  platform/x86: intel_scu_ipc: make intel_scu_ipc_pdata_t const
  platform/x86: intel_mid_powerbtn: make mid_pb_ddata const
  platform/x86: intel_mid_powerbtn: fix error return code in mid_pb_probe()
  platform/x86: hp-wmi: Remove unused macro helper
  platform/x86: hp-wmi: Correctly determine method id in WMI calls
  platform/x86: intel-vbtn: match power button on press rather than release
  platform/x86: dell-wmi: Fix driver interface version query
  platform/x86: intel_telemetry: remove redundant macro definition
  platform/x86: intel_telemetry: Add GLK PSS Event Table
  platform/x86: alienware-wmi: fix format string overflow warning
  ...
2017-09-08 16:04:50 -07:00
Linus Torvalds
ee89252b9e ARC changes for 4.14-rc1
- support for HSDK board hosting a Quad core HS38x4 based SoC running @ 1 GHz
    (and some prerrquisite changes such as ability to scoot the kernel code/data
     from start of memory map etc)
 
  - Quite a few updates for EZChip (Mellanox) platform
 
  - Fixes to fault/exception printing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZstaxAAoJEGnX8d3iisJe5I0QAIExIdU5/V/bgJ7EJJaa6qW4
 VxB5HXzbwOuIx/3i/uv4AwBIoeZIzuRQnjwf2dzTJms5vjT2zR08DGYIBmtSAA23
 ZUmpZVd865IItLCRM7WOerP6B6gaHaObzNlZoo2d8rVnz0fruc5Td4PDC1Esfs7D
 vA4aITbiG6FsJMYFeYR6IKJbM8D1CmB2Gm1gEPIifniJ9dy/V9Xi5ttvISpVJSNx
 QMb6PDHVEpkOBypUEJKeoClFZlkeqscejjXmZ3QrhoeHM//3hX8MdvyvFBmoCY4t
 YpmmrfmoCupwFFn7+XDwYqDyYvJk/H84n64tUcpM7PLqCuw4BaMhd3KTjkTwvsnN
 H5NAhqbHIW3r4a9esn53yvgY8zk9i6U7qmhKpEwkUQTtUZ7XrdfL1H1t08cqtxPX
 /eFBkeKNshJy8EU02MewtxvWXON3RoJC3qgHoLkrj+iq5HTQjaDEahbQNm+rnXFI
 EdRMBwPX2sXOvB/m/jQYjz6QM1QTl6zHy+tXbBpATIqgRxsp6SIInqGmq7fC032a
 K7zPWo2Vf2LLl4ifhFJaYwbrQotqDGe/F72K1C5RcWKLnhMPdLgZ4Lwf0NcJTeDt
 DjmqUFXwNdQ2Ydw0B9JxeTddVCzdLHPQqxOOvvBI0vvgsF8AFmAmx2QhMdQTsZJr
 73mD3udrQN48yYzAIZQf
 =w8CJ
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - Support for HSDK board hosting a Quad core HS38x4 based SoC running
   @1GHz (and some prerrquisite changes such as ability to scoot the
   kernel code/data from start of memory map etc)

 - Quite a few updates for EZChip (Mellanox) platform

 - Fixes to fault/exception printing

* tag 'arc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (26 commits)
  ARC: Re-enable MMU upon Machine Check exception
  ARC: Show fault information passed to show_kernel_fault_diag()
  ARC: [plat-hsdk] initial port for HSDK board
  ARC: mm: Decouple RAM base address from kernel link address
  ARCv2: IOC: Tighten up the contraints (specifically base / size alignment)
  ARC: [plat-axs103] refactor the DT fudging code
  ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clk
  ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk setting
  ARCv2: SLC: provide a line based flush routine for debugging
  ARC: Hardcode ARCH_DMA_MINALIGN to max line length we may have
  ARC: [plat-eznps] handle extra aux regs #2: kernel/entry exit
  ARC: [plat-eznps] handle extra aux regs #1: save/restore on context switch
  ARC: [plat-eznps] avoid toggling of DPC register
  ARC: [plat-eznps] Update the init sequence of aux regs per cpu.
  ARC: [plat-eznps] new command line argument for HW scheduler at MTM
  ARC: set boot print log level to PR_INFO
  ARC: [plat-eznps] Handle user memory error same in simulation and silicon
  ARC: [plat-eznps] use schd.wft instruction instead of sleep at idle task
  ARC: create cpu specific version of arch_cpu_idle()
  ARC: [plat-eznps] spinlock aware for MTM
  ...
2017-09-08 16:02:18 -07:00
Linus Torvalds
0d519f2d1e pci-v4.14-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZsr8cAAoJEFmIoMA60/r8lXYQAKViYIRMJDD4n3NhjMeLOsnJ
 vwaBmWlLRjSFIEpag5kMjS1RJE17qAvmkBZnDvSNZ6cT28INkkZnVM2IW96WECVq
 64MIvDijVPcvqGuWePCfWdDiSXApiDWwJuw55BOhmvV996wGy0gYgzpPY+1g0Knh
 XzH9IOzDL79hZleLfsxX0MLV6FGBVtOsr0jvQ04k4IgEMIxEDTlbw85rnrvzQUtc
 0Vj2koaxWIESZsq7G/wiZb2n6ekaFdXO/VlVvvhmTSDLCBaJ63Hb/gfOhwMuVkS6
 B3cVprNrCT0dSzWmU4ZXf+wpOyDpBexlemW/OR/6CQUkC6AUS6kQ5si1X44dbGmJ
 nBPh414tdlm/6V4h/A3UFPOajSGa/ZWZ/uQZPfvKs1R6WfjUerWVBfUpAzPbgjam
 c/mhJ19HYT1J7vFBfhekBMeY2Px3JgSJ9rNsrFl48ynAALaX5GEwdpo4aqBfscKz
 4/f9fU4ysumopvCEuKD2SsJvsPKd5gMQGGtvAhXM1TxvAoQ5V4cc99qEetAPXXPf
 h2EqWm4ph7YP4a+n/OZBjzluHCmZJn1CntH5+//6wpUk6HnmzsftGELuO9n12cLE
 GGkreI3T9ctV1eOkzVVa0l0QTE1X/VLyEyKCtb9obXsDaG4Ud7uKQoZgB19DwyTJ
 EG76ridTolUFVV+wzJD9
 =9cLP
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...
2017-09-08 15:47:43 -07:00
Linus Torvalds
0756b7fbb6 First batch of KVM changes for 4.14
Common:
  - improve heuristic for boosting preempted spinlocks by ignoring VCPUs
    in user mode
 
 ARM:
  - fix for decoding external abort types from guests
 
  - added support for migrating the active priority of interrupts when
    running a GICv2 guest on a GICv3 host
 
  - minor cleanup
 
 PPC:
  - expose storage keys to userspace
 
  - merge powerpc/topic/ppc-kvm branch that contains
    find_linux_pte_or_hugepte and POWER9 thread management cleanup
 
  - merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations
 
  - fixes
 
 s390:
  - merge of topic branch tlb-flushing from the s390 tree to get the
    no-dat base features
 
  - merge of kvm/master to avoid conflicts with additional sthyi fixes
 
  - wire up the no-dat enhancements in KVM
 
  - multiple epoch facility (z14 feature)
 
  - Configuration z/Architecture Mode
 
  - more sthyi fixes
 
  - gdb server range checking fix
 
  - small code cleanups
 
 x86:
  - emulate Hyper-V TSC frequency MSRs
 
  - add nested INVPCID
 
  - emulate EPTP switching VMFUNC
 
  - support Virtual GIF
 
  - support 5 level page tables
 
  - speedup nested VM exits by packing byte operations
 
  - speedup MMIO by using hardware provided physical address
 
  - a lot of fixes and cleanups, especially nested
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJZspE1AAoJEED/6hsPKofoDcMIALT11n+LKV50QGwQdg2W1GOt
 aChbgnj/Kegit3hQlDhVNb8kmdZEOZzSL81Lh0VPEr7zXU8QiWn2snbizDPv8sde
 MpHhcZYZZ0YrpoiZKjl8yiwcu88OWGn2qtJ7OpuTS5hvEGAfxMncp0AMZho6fnz/
 ySTwJ9GK2MTgBw39OAzCeDOeoYn4NKYMwjJGqBXRhNX8PG/1wmfqv0vPrd6wfg31
 KJ58BumavwJjr8YbQ1xELm9rpQrAmaayIsG0R1dEUqCbt5a1+t2gt4h2uY7tWcIv
 ACt2bIze7eF3xA+OpRs+eT+yemiH3t9btIVmhCfzUpnQ+V5Z55VMSwASLtTuJRQ=
 =R8Ry
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.14

  Common:
   - improve heuristic for boosting preempted spinlocks by ignoring
     VCPUs in user mode

  ARM:
   - fix for decoding external abort types from guests

   - added support for migrating the active priority of interrupts when
     running a GICv2 guest on a GICv3 host

   - minor cleanup

  PPC:
   - expose storage keys to userspace

   - merge kvm-ppc-fixes with a fix that missed 4.13 because of
     vacations

   - fixes

  s390:
   - merge of kvm/master to avoid conflicts with additional sthyi fixes

   - wire up the no-dat enhancements in KVM

   - multiple epoch facility (z14 feature)

   - Configuration z/Architecture Mode

   - more sthyi fixes

   - gdb server range checking fix

   - small code cleanups

  x86:
   - emulate Hyper-V TSC frequency MSRs

   - add nested INVPCID

   - emulate EPTP switching VMFUNC

   - support Virtual GIF

   - support 5 level page tables

   - speedup nested VM exits by packing byte operations

   - speedup MMIO by using hardware provided physical address

   - a lot of fixes and cleanups, especially nested"

* tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  KVM: arm/arm64: Support uaccess of GICC_APRn
  KVM: arm/arm64: Extract GICv3 max APRn index calculation
  KVM: arm/arm64: vITS: Drop its_ite->lpi field
  KVM: arm/arm64: vgic: constify seq_operations and file_operations
  KVM: arm/arm64: Fix guest external abort matching
  KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd
  KVM: s390: vsie: cleanup mcck reinjection
  KVM: s390: use WARN_ON_ONCE only for checking
  KVM: s390: guestdbg: fix range check
  KVM: PPC: Book3S HV: Report storage key support to userspace
  KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9
  KVM: PPC: Book3S HV: Fix invalid use of register expression
  KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation
  KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
  KVM: PPC: e500mc: Fix a NULL dereference
  KVM: PPC: e500: Fix some NULL dereferences on error
  KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list
  KVM: s390: we are always in czam mode
  KVM: s390: expose no-DAT to guest and migration support
  KVM: s390: sthyi: remove invalid guest write access
  ...
2017-09-08 15:18:36 -07:00
SeongJae Park
6fad4e69e8 kokr/memory-barriers.txt: Apply atomic_t.txt change
This commit applies memory-barriers.txt part of upstream change, commit
706eeb3e9c ("Documentation/locking/atomic: Add documents for new
atomic_t APIs") to Korean translation.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-08 10:10:53 -06:00
SeongJae Park
53e3153816 kokr/doc: Update memory-barriers.txt for read-to-write dependencies
This commit applies upstream change, commit 66ce3a4dcb ("doc: Update
memory-barriers.txt for read-to-write dependencies") to Korean
translation.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-08 10:10:46 -06:00
Mauro Carvalho Chehab
54d6d73f50 docs-rst: don't require adjustbox anymore
Only the media PDF book was requiring adjustbox, in order to
scale big tables. That worked pretty good with Sphinx versions
1.4 and 1.5, but Spinx 1.6 changed the way tables are produced,
by introducing some weird macros before tabulary.
That causes adjustbox to fail. So, it can't be used anymore,
and its usage was removed from the media book.

So, let's remove it from conf.py and sphinx-pre-install.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-08 10:02:55 -06:00
Mauro Carvalho Chehab
9fdcd6afd8 docs-rst: conf.py: only setup notice box colors if Sphinx < 1.6
Sphinx 1.5 added a new way to change backward colors for note
boxes, but kept backward compatibility with 1.4. On Sphinx 1.6,
the old way stopped working, in favor of a new less hackish
way.

Unfortunately, this is currently too buggy to be used, and
the old way doesn't work anymore. So, we have no option but
to stick with boring notice boxes.

One example of such bug is the notice that it is inside
struct v4l2_plane, at the "bytesused" field.

At least, add a notice about how to use, as maybe some day
the bug will vanish.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-08 10:02:44 -06:00
Mauro Carvalho Chehab
c4b326e1a6 docs-rst: conf.py: remove lscape from LaTeX preamble
Only the media book used this extension in the past, but
it is not required anymore.

Cleanup patch only.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-09-08 10:02:39 -06:00
Radim Krčmář
5f54c8b2d4 Merge branch 'kvm-ppc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
This fix was intended for 4.13, but didn't get in because both
maintainers were on vacation.

Paul Mackerras:
 "It adds mutual exclusion between list_add_rcu and list_del_rcu calls
  on the kvm->arch.spapr_tce_tables list.  Without this, userspace could
  potentially trigger corruption of the list and cause a host crash or
  worse."
2017-09-08 14:40:43 +02:00
Linus Torvalds
5969d1bb30 Merge branch 'gperf-removal'
Remove our use of 'gperf' for generating perfect hashes from some of our
build tools.

This removal was prompted by Masahiro Yamada sending out a patch that
removes all our pre-generated files, and when I tested it, I noticed
that the gperf version I have (3.1) apparently generates code that no
longer works with out code-base because the function interfaces
generated by gperf have changed.

We really don't care that much, and the gperf people changed their
interfaces in ways that makes it annoying to work with them.  Tools that
make it hard to use them should not be used, and the kernel is not at
all interested in some autoconf mess.  So remove the gperf dependency
entirely.

It turns out that if you ignore the pre-generated files, the use of
gperf apparently saved us a whopping fifteen lines of code.  It
obviously wasn't worth it, considering that the pre-generated files are
about 500 lines.

I sent this out as a patch about three weeks ago, and got absolutely
zero responses.  So let's see if anybody notices now that I merge it.
Because there might be serious bugs here, but it WorksForMe(tm).

* gperf-removal:
  Remove gperf usage from toolchain
2017-09-07 21:39:15 -07:00
Linus Torvalds
572c01ba19 SCSI misc on 20170907
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates.
 
 The major driver change here is the elimination of the block based
 cciss driver in favour of the SCSI based hpsa driver (which now drives
 all the legacy cases cciss used to be required for).  Plus a reset
 handler clean up and the redo of the SAS SMP handler to use bsg lib.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZscDNAAoJEAVr7HOZEZN4DWIQAK/UkkrvKpV/jLATM/yi7CoL
 QidY86Hmwwl7A9HQ+2fjLfAsye0xcCzRwkucKK90IP5b4pefHhiJJfiMKAAe3TUW
 xstnY5z5jaOhDG4nyJFoSm5fH5qXkMnJ8NZRK8f6Qg5yBN5dStEKqoBboNsz4KBI
 md7idw0mbp5i2GXlJwSpc5eDS97GiPL6WkwgGaGKfXF1NDau0GbEdjijfz55haCD
 pMhY7WJh/71RfOq/1ThXT1Z3khOlVcKXrkdO+602n7zh/klRBRtBC8m2a6xCfZPj
 n7Pb/s0jhCQPd+e/Xtv7WEbY8uNOCrGoVgZ6U5EGrT5IeTfep24ackYqerjMhE63
 esi4BJY8lUP9SGleLMgjYWyCHdmxBJRa7UI614DWN/H0QoGP6j/2EzGoi5Fw04vC
 H8/+aqPPWZc9KUBioRYo8xWO8YgMqL2eyXY+Tc9cwxqAe2T6k/NC1zJVgDFKXfzb
 QoWW4v9NNmYwf5vL/7tNgkeTMFQV66yUR7dR3SGTSk8UIrJ40ok0JyUAsDg86ZAH
 BfMkWwhWQ6Byoel0Y7Ti88T49Cox/64r/I0ux06Qgg99+KpRLT7z20+GLIEHgXxg
 116C39rgvYKqzc7W8RCyj8qSROuMVzg6QFbB6n+1PEsYIX2O8A2Re3jdS34q2LbX
 aBDm/Lfdl4kkJrV9xY6P
 =nQUG
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, zfcp and a host of minor updates.

  The major driver change here is the elimination of the block based
  cciss driver in favour of the SCSI based hpsa driver (which now drives
  all the legacy cases cciss used to be required for). Plus a reset
  handler clean up and the redo of the SAS SMP handler to use bsg lib"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: scsi-mq: Always unprepare before requeuing a request
  scsi: Show .retries and .jiffies_at_alloc in debugfs
  scsi: Improve requeuing behavior
  scsi: Call scsi_initialize_rq() for filesystem requests
  scsi: qla2xxx: Reset the logo flag, after target re-login.
  scsi: qla2xxx: Fix slow mem alloc behind lock
  scsi: qla2xxx: Clear fc4f_nvme flag
  scsi: qla2xxx: add missing includes for qla_isr
  scsi: qla2xxx: Fix an integer overflow in sysfs code
  scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2()
  scsi: aacraid: get rid of one level of indentation
  scsi: aacraid: fix indentation errors
  scsi: storvsc: fix memory leak on ring buffer busy
  scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough
  scsi: smartpqi: remove the smp_handler stub
  scsi: hpsa: remove the smp_handler stub
  scsi: bsg-lib: pass the release callback through bsg_setup_queue
  scsi: Rework handling of scsi_device.vpd_pg8[03]
  scsi: Rework the code for caching Vital Product Data (VPD)
  scsi: rcu: Introduce rcu_swap_protected()
  ...
2017-09-07 21:11:05 -07:00
Zhang Rui
7a348799d5 Merge branches 'mediatek-mt2712', 'rockchip-rk3328' and 'uniphier-thermal' into thermal-soc 2017-09-08 11:17:53 +08:00
Linus Torvalds
74fee4e88f DeviceTree updates for 4.14:
- Convert more DT code to use of_property_read_* API.
 
 - Improve DT overlay support when adding multiple overlays.
 
 - Convert printk's to %pOF format specifiers. Most went via subsystem
   trees, but picked up the remaining orphans.
 
 - Correct unittests to use preferred "okay" for "status" property value.
 
 - Add a KASLR seed property.
 
 - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa.
 
 - Fix modalias buffer handling.
 
 - Clean-up of include paths for building dtbs.
 
 - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices.
 
 - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC.
 
 - Add compatible string for Allwinner H5 Mali-450 GPU.
 
 - Fix links to old OpenFirmware docs with new mirror on devicetree.org.
 
 - Remove status property from binding doc examples.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZsVkbEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcPWPhAA
 gi3Ekc3680YE1iLnXHkDkZHmzE0KvzhIyHrzqIkoxtISfmboVdydMQFnAfyhPJA4
 UA5vBKiL4uhWSpHglQpyY2ld+S9tym3IQrGEhEsHxf6njfQpkiNqVKsTYxGAmwxW
 E5B6sFl5O4q9e84pnselFsmx6TI+SlmPrqbN7BiluqczeUu358QlF2x8GZuJDN35
 cLJKZSeE/w2xLIRIpHUoh7My8/d3jJ/OxuqXFyt/f42BtGp++WganCQS5XR0dxSA
 SMdzHhWDTqCKsih5/80vqVXpDBn8iX6NEx7zKprSRc3mTCNIWHG70m/tNAk6/FQR
 gvMR3BJOiA0MOIO3M3qaJeVuFkJDixaXmwL0V/Qpuon+6EMdRIfgcVTScAXNnamP
 IHmN7fzFYE9tNCzkQjEHkQtVxyQi+1CAM61dZQD1rwi4M2YZHmNxdfLj4ilRb+q8
 2SDugUjz3tEdEzi6huKc5oGwqmJwLQmSlgP+VGcJnt6kotLy+PEdPK1cYWtwSKmp
 p/xhbXZSCFcwCHXGbyGE6yOXX4DKaLD11KmAMlJ2zwphfvwE4v/azuLmOtviiYTS
 23KGIEZJYwRP1QG/BwsjKhl7x37NeKKKHomryMVF3R7M0mf1VtcdSSYROirNi2+t
 AZZSyXoK8E/Fx4hR1YHxJ3TX4aBkJ2rBi3+RgABXa10=
 =IBAh
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "There's a few orphans in the conversion to %pOF printf specifiers
  included here that no one else picked up.

  Summary:

   - Convert more DT code to use of_property_read_* API.

   - Improve DT overlay support when adding multiple overlays

   - Convert printk's to %pOF format specifiers. Most went via subsystem
     trees, but picked up the remaining orphans

   - Correct unittests to use preferred "okay" for "status" property
     value

   - Add a KASLR seed property

   - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa

   - Fix modalias buffer handling

   - Clean-up of include paths for building dtbs

   - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10
     devices

   - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC

   - Add compatible string for Allwinner H5 Mali-450 GPU

   - Fix links to old OpenFirmware docs with new mirror on
     devicetree.org

   - Remove status property from binding doc examples"

* tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  devicetree: Adjust status "ok" -> "okay" under drivers/of/
  dt-bindings: Remove "status" from examples
  dt-bindings: pinctrl: sh-pfc: Use generic node name
  dt-bindings: Add vendor Mellanox
  dt-binding: net/phy: fix interrupts description
  virt: Convert to using %pOF instead of full_name
  macintosh: Convert to using %pOF instead of full_name
  ide: pmac: Convert to using %pOF instead of full_name
  microblaze: Convert to using %pOF instead of full_name
  dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/
  of: Use PLATFORM_DEVID_NONE definition
  of/device: Fix of_device_get_modalias() buffer handling
  of/device: Prevent buffer overflow in of_device_modalias()
  dt-bindings: add amc6821, isl1208 trivial bindings
  dt-bindings: add vendor prefix for Theobroma Systems
  of: search scripts/dtc/include-prefixes path for both CPP and DTC
  of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP
  of: remove drivers/of/testcase-data from include search path for CPP
  of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered
  iio: srf08: add device tree binding for srf02 and srf10
  ...
2017-09-07 14:43:33 -07:00
Linus Torvalds
5f9cc57036 LED updates for 4.14
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZsZswAAoJEL1qUBy3i3wm2cwQANp9Hufui0BYxD7X9bB3sBvX
 LJ2lbwQlZ93gmQo176fvE22wYw90wmf4CG12pdx8CB4TIBOuaEl1EUptaIxHjBkP
 +MOmiGxT0YZgUDmSo+sCL+LHEDWU8gcs8MI5ZkAxgALUb0kYiQySH5UlCJJOJIJv
 ww1A4K1bo6VONli+y8ZDa3eKgkArg1/pXYl2VejNMSkr88fyzf35fOKD44lMUGos
 5KFVWdPMnz1OuVbh199x9vAPZygb4PNzJL1Tf2ntklBfU3mX+582e6uvIPqh4Tuy
 D5ZianpBNtA0IBV4G0UE+n/9rOy9oAr34+Tq9Gv0BRLlQXsC8FMEM5xcCDd1kFCI
 L6FeiGc1YnEtJpUVEhcWzmpww2EBBRKIB9lJK5c8VUlWf/yZME72Al5R8c7uffcE
 hc78eUVwM2fHNmBhmCmK49flC67/LMzHMiaEQ/lSGtGnd8ratclshFuooiPzsJN/
 MSTX2B3yxWvBjwmZMNixY6WasduKKJs4K5xHnHJzyLt0mvClLiwgOvi1Dks0t+Ko
 imE6cdU3LCUeJJb4I9SgHTTjp33CTqq5ZBhbFsgqjNsfj4o/6GmnWxvSZ4ywqJMW
 HwU4iyBKlx2AVfhzIPozuoE67+HJyRYIexsUZi4vt0Pw2qHxwp1RvH+BMQbXGLLg
 rJ/H9ef5BAPRkPWxe1HM
 =E1ff
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "LED class drivers improvements:

  leds-pca955x:
   - add Device Tree support and bindings
   - use devm_led_classdev_register()
   - add GPIO support
   - prevent crippled LED class device name
   - check for I2C errors

  leds-gpio:
   - add optional retain-state-shutdown DT property
   - allow LED to retain state at shutdown

  leds-tlc591xx:
   - merge conditional tests
   - add missing of_node_put

  leds-powernv:
   - delete an error message for a failed memory allocation in
     powernv_led_create()

  leds-is31fl32xx.c
   - convert to using custom %pOF printf format specifier

  Constify attribute_group structures in:
   - leds-blinkm
   - leds-lm3533

  Make several arrays static const in:
   - leds-aat1290
   - leds-lp5521
   - leds-lp5562
   - leds-lp8501"

* tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: check for I2C errors
  leds: gpio: Allow LED to retain state at shutdown
  dt-bindings: leds: gpio: Add optional retain-state-shutdown property
  leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create()
  leds: lp8501: make several arrays static const
  leds: lp5562: make several arrays static const
  leds: lp5521: make several arrays static const
  leds: aat1290: make array max_mm_current_percent static const
  leds: pca955x: Prevent crippled LED device name
  leds: lm3533: constify attribute_group structure
  dt-bindings: leds: add pca955x
  leds: pca955x: add GPIO support
  leds: pca955x: use devm_led_classdev_register
  leds: pca955x: add device tree support
  leds: Convert to using %pOF instead of full_name
  leds: blinkm: constify attribute_group structures.
  leds: tlc591xx: add missing of_node_put
  leds: tlc591xx: merge conditional tests
2017-09-07 14:33:13 -07:00
Linus Torvalds
cd7b34fe1c dmaengine updates for 4.14-rc1
- Removal of DMA_SG support as we have no users for this feature
  - New driver for Altera / Intel mSGDMA IP core
  - Support for memset in dmatest and qcom_hidma driver
  - Update for non cyclic mode in k3dma, bunch of update in bam_dma, bcm sba-raid
  - Constify device ids across drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZsXteAAoJEHwUBw8lI4NHPwcP/iihF1n7jOQVtUm3zxPvUV+n
 GzU7+rqAEDLKBaIttK28LIjgvg0AC/4aiEsosfCzTjpkzMHteRw00YyplwF7/wdM
 O0owKOIub4PriDiL6d/SWFnhcWwv0/KLbyKscQcOwwvkksG/mwMn1VfW7alCrz1w
 81TOQaW9SxLxL7guJU0aQHljkudT53l8Dgsp55iC9Ccz515Iuu7dQm3DnSG3sYjJ
 Ct4u4MWWzDmmKKpbDoYe/Z+fiQT0WKuGfI7QHURVnw5qLo2sDKREWGbThhRG/lZj
 YlnLQnkjWwLU5dyX1MyIWipPxe83sjf/7OwJ7XUlLjD6o+lNEuQxjmNkVAh0hNRc
 dgrXRuqPRJMW40uOvAMDHTkexxikWc5ggt5LN9dIYDOdaS4Ch5ewf19SRi9pSDap
 FZeIWY1FWwQCAU7HQMwSYyRLBjlmEmeSkElkXCd+2wu5aH2oKOMUMbUIYcqL4fjD
 qMAR7kfn6e92fDT1gR1ZKL79Cfe9zsCQA3XmecpC/HwqiE3XtfZuDY/73cXD0MeO
 SbJUCv4ldPGjrTKBHvs0wiWbxi5Mj5sXglmSaD0lEhtMsOfhPHY2BGatTzSmKKwO
 WwmKAvM8qElQZy2Eh25dvlE04yAOofoJb6Pf/AraQOLTUkMyF8wRWEpltjUuttM9
 VzQLvh8s25naKM5mOAM2
 =88SI
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This one features the usual updates to the drivers and one good part
  of removing DA_SG from core as it has no users.

  Summary:

   - Remove DMA_SG support as we have no users for this feature
   - New driver for Altera / Intel mSGDMA IP core
   - Support for memset in dmatest and qcom_hidma driver
   - Update for non cyclic mode in k3dma, bunch of update in bam_dma,
     bcm sba-raid
   - Constify device ids across drivers"

* tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits)
  dmaengine: sun6i: support V3s SoC variant
  dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
  dmaengine: rcar-dmac: document R8A77970 bindings
  dmaengine: xilinx_dma: Fix error code format specifier
  dmaengine: altera: Use macros instead of structs to describe the registers
  dmaengine: ti-dma-crossbar: Fix dra7 reserve function
  dmaengine: pl330: constify amba_id
  dmaengine: pl08x: constify amba_id
  dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED
  dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending
  dmaengine: bcm-sba-raid: Add debugfs support
  dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED
  dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests()
  dmaengine: bcm-sba-raid: Pre-ack async tx descriptor
  dmaengine: bcm-sba-raid: Peek mbox when we have no free requests
  dmaengine: bcm-sba-raid: Alloc resources before registering DMA device
  dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration
  dmaengine: bcm-sba-raid: Increase number of free sba_request
  dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request
  dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device
  ...
2017-09-07 14:03:05 -07:00
Linus Torvalds
968c61f7da - New Drivers
- RK805 Power Management IC (PMIC)
    - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
    - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
 
  - New Device Support
    - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
    - Add support for X-Powers AXP806 to axp20x
    - Add support for X-Powers AXP813 to axp20x
    - Add support for Intel Sunrise Point LPSS to intel-lpss-pci
 
  - New Functionality
    - Amend API to provide register layout; atmel-smc
 
 - Fix-ups
    - DT re-work; omap, nokia
    - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
    - Fix chip ID formatting issue(s); rk808
    - Optionally register touchscreen devices; da9052-core
    - Documentation improvements; twl-core
    - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
    - Drop unnecessary static declaration; max8925-i2c
    - Kconfig changes (missing deps and remove module support)
    - Slim down oversized licence statement; hi6421-pmic-core
    - Use managed resources (devm_*); lp87565
    - Supply proper error checking/handling; t7l66xb
 
  - Bug Fixes
    - Fix counter duplication issue; da9052-core
    - Fix potential NULL deference issue; max8998
    - Leave SPI-NOR write-protection bit alone; lpc_ich
    - Ensure device is put into reset during suspend; intel-lpss
    - Correct register offset variable size; omap-usb-tll
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZsP0YAAoJEFGvii+H/HdhrJUP/RB6BTCDMf3WCi5e6PN8IFST
 JspCcf4bwKVc5lDvORQglVRfBhKY/uSr7F9xlfXtHx8V60ZNo1VOQcyJBTKIz+IJ
 +FQQgM3lEMKIn3QCcu9lKSRomJx55YDnF5SrZ8FzkC8pGLrCYEru5HfqFqOTfPqq
 OH2wZSqiX4H/jYdfVzp3bgqXkDff/nSEGTeFankFkv4wRvLGRxlpVuqkRJcvEJA3
 d8N9MoBBxkZAtAn2j1H5cHyPx5NrBEM2gkXpDfdd+kJNnFzjL72xsXd6rp+N6rcm
 d20eL+1fyJVyvGhGiDOhFwqRAZEqvjPSI4k5kQdRk8IdioGgbmaI74eUbv+rGAKp
 P9QdR7n1ctYyVgwnawIwKTPMzdZo5+9kdagCtu8IBVT02zQqVSDKZM7dAYo2rJuF
 yw24jONcwHFrKA25n1pLJmMbJGHq83kqqw3q5kl17nyArvOOcyspCTODIL9iskhZ
 L0IoIMwQYEj/pnI+iuXl9bJ30v2FIJxyCzUR2u7OJnrH7G27rsoOL0WDqxbp3Dp9
 7tD+6OzMiyIEDxtcd74kjg7g9p5HCmcY3FiDWirmQuZIR3abSET4ap+cTYPdFqVZ
 widS5Pi4PP40ZFN6+4lbBHLlh6MgpHpig9M03kFAr1SyZnH8nf4TnCsFV+wYPyTb
 LR3cKpFeTY8IyFWaLoSg
 =TKIm
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...
2017-09-07 13:51:13 -07:00
Linus Torvalds
9d71941d39 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - a new GPIO bit-banging driver implementing PS/2 protocol

 - a new power key driver for Rockchip RK805 PMIC

 - bunch of patches constifying various device ID structures

 - Elan I2C touchpad driver now supports devices with 2 buttons

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits)
  Input: byd - make array seq static, reduces object code size
  Input: xilinx_ps2 - fix multiline comment style
  Input: pxa27x_keypad - handle return value of clk_prepare_enable
  Input: tegra-kbc - handle return value of clk_prepare_enable
  Input: PS/2 gpio bit banging driver for serio bus
  Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
  Input: ambakmi - constify amba_id
  Input: atmel_mxt_ts - add support for reset line
  Input: atmel_mxt_ts - use more managed resources
  Input: wacom_w8001 - constify serio_device_id
  Input: tsc40 - constify serio_device_id
  Input: touchwin - constify serio_device_id
  Input: touchright - constify serio_device_id
  Input: touchit213 - constify serio_device_id
  Input: penmount - constify serio_device_id
  Input: mtouch - constify serio_device_id
  Input: inexio - constify serio_device_id
  Input: hampshire - constify serio_device_id
  Input: gunze - constify serio_device_id
  Input: fujitsu_ts - constify serio_device_id
  ...
2017-09-07 13:39:21 -07:00
Linus Torvalds
c0da4fa0d1 media updates for v4.14-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZsSBoAAoJEAhfPr2O5OEVDc4QAJZSuVYmyLgvtmPxhyqgCvkz
 I0DmWM4ZtK2VT/xJ/AA23z8IiLKi2+pDC0Xx6/aIiA665cyl3oPUdkKIaHW9Z6+A
 fV8gSFkmGkluQb9mP/KdHYI2oSeEv2ivCa1kfaApYcoBa904z8uU++z15Iu5p/+m
 fjpc2vnc9rax0Vuwmgv7p1CL4j4e/ja0siCSCGbu2ad50KqP4ytnBooNPQOQt89D
 L+Av5MeGml/CTUUnAFjWfSmQ72Ht8GhoBBKc6wGoq9x3GTckDDTqy8BAqGt4UQnu
 fR0mb71zuSVmTjxRe7tc/74m3ReaeSHzQeHJhjdQslvNmV3RVQgk/6CCsmqNEegr
 rbC3glQCM+gp5YywCjRL6DCPsoqvjexLtPQjMZIGYxgSYQUyXGOxilgmj9+73761
 6aOl0nqdgN+vlWzaSeDF9EQxRsc+cCq/Po8/xuPE/Pzs6zTQwU+6b+ADLf9jCyDP
 LTC49wOj24SoWiTlG1FTct2ogZ3h5wNPWlurBtmyiFJn+43RpsH5IW9wLilCjeiE
 6JeCWEIBglCCq/TVCzETKNSaixDL6/lMQ9uRdCpIO4VLyoS6S9pZASNPBmQ1h7h/
 oTjYDeWirIthNOccstbBoJQYSX62CqAIW3wq5ME6PAgM+ioiLXLYk0fV3yBKoBNW
 Z0SBeTcuPxWmfzuxMtik
 =fNM2
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "Brazil's Independence Day pull request :-)

  This is one of the biggest media pull requests, with 625 patches
  affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).

  This contains:

   - A lot of new drivers:
     * DVB frontends: mxl5xx, stv0910, stv6111;
     * camera flash: as3645a led driver;
     * HDMI receiver: adv748X;
     * camera sensor: Omnivision 6650 5M driver (ov6650);
     * HDMI CEC: ao-cec meson driver;
     * V4L2: Qualcom camss driver;
     * Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.

   - The DDbridge DVB driver got a massive update, with makes it in sync
     with modern hardware from that vendor;

   - There's an important milestone on this series: the DVB
     documentation was written in 2003, but only started to be updated
     in 2007. It also used to contain several gaps from the time it was
     kept out of tree, mentioning error codes and device nodes that
     never existed upstream. On this series, it received a massive
     update: all non-deprecated digital TV APIs are now in sync with the
     current implementation;

   - Some DVB APIs that aren't used by any upstream driver got removed;

   - Other parts of the media documentation algo got updated, fixing
     some bugs on its PDF output and making it compatible with Sphinx
     version 1.6.

     As the number of hacks required to build PDF output reduced, I hope
     we'll have less troubles as newer versions of our documentation
     toolchain are released (famous last words);

   - As usual, lots of driver cleanups and improvements"

* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
  media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
  media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
  media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
  media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
  media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
  media: add qcom_camss.rst to v4l-drivers rst file
  media: dvb headers: make checkpatch happier
  media: dvb uapi: move frontend legacy API to another part of the book
  media: pixfmt-srggb12p.rst: better format the table for PDF output
  media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
  media: index.rst: don't write "Contents:" on PDF output
  media: pixfmt*.rst: replace a two dots by a comma
  media: vidioc-g-fmt.rst: adjust table format
  media: vivid.rst: add a blank line to correct ReST format
  media: v4l2 uapi book: get rid of driver programming's chapter
  media: format.rst: use the right markup for important notes
  media: docs-rst: cardlists: change their format to flat-tables
  media: em28xx-cardlist.rst: update to reflect last changes
  media: v4l2-event.rst: adjust table to fit on PDF output
  media: docs: don't show ToC for each part on PDF output
  ...
2017-09-07 12:53:14 -07:00
Linus Torvalds
d969443064 sound updates for 4.14-rc1
We have touched quite a lot of files but with fewer changes at this
 cycle; as you can see, most of changes are trivial fixes, especially
 constification patches.  Among the massive attacks by constification
 gangs, we had a few core changes (mostly for ASoC core), as well the
 fixes and the updates by major vendors.  Some highlights are below:
 
 ALSA core:
 - Fix possible races in control API user-TLV codes
 - Small cleanup of PCM core
 
 ASoC:
 - Continued work for componentization; still half-baked, but we're
   certainly progressing
 - Use of devres for jack detection GPIOs, rather as a cleanup
 - Jack detection support for Qualcomm MSM8916
 - Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
   systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
   WM8523
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlmuvBsOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaQl2Q/+I7gcTwlNqjqKL0NZx2cX37nHmfsEcEkWXzx5
 +GFx7LJQf1sLlpxA8YWFThY24/59lH711guC1q8OGwRFdwl9X01+b/vScpvrxnzH
 a0wBTFuvQhr70brc33Y3q3mPhspC5QIUOJtzULG6MiLgzlTBZqLLu2uKV4fSz36I
 pGhi9OB7gMyUL4PFXk7xkcCNxzdOiptWWwFJgh39Yd+9yNP3/U0y3hHz6uzDuQf1
 tUIxDhwl22w8gCiYYNbBn8pcSGH+KT4BMqa5+/+qlV5exNa+Es8DozCQ+lis579+
 dnVc/rpzDJPotmWYdWJsuAmkURvtgzizWSill31bRSoydhfClw6yfl6EoGfZdP50
 3SES87YhTCAPCWfMFSUBtG3PZHgKQcp+QqWCrPaxmVIjqFDS+OxYxtkfVqGRd1u3
 Vv9VCbXhocsdMxA4FlTdyoQPCM9DxcHIdqCmYyjDs55eSy/dO4ND005eunnZawNh
 8kbQcP4873PbDdCssXEeWsbvDSkaeVEa5/taLpalfG7bIO9zHX7ese/0zIgljaF3
 0zK3beWIaIxIeZ473+/gwmzFSpUeIEFJW6YJDkT7CDrRuT1C6fzhaAkz7J+BdzZd
 et0Cqr9tQg0Xk9SsXV1rq1h90e9yQcG0wdalkGrxEVDVtnTRmL5v4AiyX8wzpTAp
 MbuniQo=
 =/Rv6
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "We have touched quite a lot of files but with fewer changes at this
  cycle; as you can see, most of changes are trivial fixes, especially
  constification patches.

  Among the massive attacks by constification gangs, we had a few core
  changes (mostly for ASoC core), as well the fixes and the updates by
  major vendors.

  Some highlights:

  ALSA core:

   - Fix possible races in control API user-TLV codes

   - Small cleanup of PCM core

  ASoC:

   - Continued work for componentization; still half-baked, but we're
     certainly progressing

   - Use of devres for jack detection GPIOs, rather as a cleanup

   - Jack detection support for Qualcomm MSM8916

   - Support for Allwinner H3, Cirrus Logic CS43130, Intel Kabylake
     systems with RT5663, Realtek RT274, TI TLV320AIC32x6 and Wolfson
     WM8523"

* tag 'sound-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (512 commits)
  ALSA: hda/ca0132 - Fix memory leak at error path
  ALSA: hda: Fix forget to free resource in error handling code path in hda_codec_driver_probe
  ASoC: cs43130: Fix unused compiler warnings for PM runtime
  ASoC: cs43130: Fix possible Oops with invalid dev_id
  ASoC: cs43130: fix spelling mistake: "irq_occurrance" -> "irq_occurrence"
  ALSA: atmel: Remove leftovers of AVR32 removal
  ALSA: atmel: convert AC97c driver to GPIO descriptor API
  ALSA: hda/realtek - Enable jack detection function for Intel ALC700
  ALSA: hda: Fix regression of hdmi eld control created based on invalid pcm
  ASoC: Intel: Skylake: Add IPC to configure the copier secondary pins
  ASoC: add missing compile rule for max98371
  ASoC: add missing compile rule for sirf-audio-codec
  ASoC: add missing compile rule for max98371
  ASoC: cs43130: Add devicetree bindings for CS43130
  ASoC: cs43130: Add support for CS43130 codec
  ASoC: make clock direction configurable in asoc-simple
  ALSA: ctxfi: Remove null check before kfree
  ASoC: max98927: Changed device property read function
  ASoC: max98927: Modified DAPM widget and map to enable/disable VI sense path
  ASoC: max98927: Added PM suspend and resume function
  ...
2017-09-07 12:44:53 -07:00
Linus Torvalds
15d8ffc964 MMC core:
- Continue to refactor the mmc block code to prepare for blkmq
  - Move mmc block debugfs into block module
  - Next step for eMMC CMDQ by adding a new mmc host interface for it
  - Move Kconfig option MMC_DEBUG from core to host
  - Some additional minor improvements
 
 MMC host:
  - Declare structs as const when applicable
  - Explicitly request exclusive reset control when applicable
  - Improve some error paths and other various cleanups
  - sdhci: Preparations to support SDHCI OMAP
  - sdhci: Improve some PM related code
  - sdhci: Re-factoring and modernizations
  - sdhci-xenon: Add runtime PM and system sleep support
  - sdhci-xenon: Add support for eMMC HS400 Enhanced Strobe
  - sdhci-cadence: Add system sleep support
  - sdhci-of-at91: Improve system sleep support
  - dw_mmc: Add support for Hisilicon hi3660
  - sunxi: Add support for A83T eMMC
  - sunxi: Add support for DDR52 mode
  - meson-gx: Add support for UHS-I SD-cards
  - meson-gx: Cleanups and improvements
  - tmio: Fix CMD12 (STOP) handling
  - tmio: Cleanups and improvements
  - renesas_sdhi: Add r8a7743/5 support
  - renesas-sdhi: Add support for R-Car Gen3 SDHI DMAC
  - renesas_sdhi: Cleanups and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZr7CEAAoJEP4mhCVzWIwp5WQQAK9l2Hg1k4tFzxQ5EmKB/9Sm
 r3eS2GrosqrsCffR3vSSKnmva/lOrQuBzhqzx1MvWAByMUc5w8Yc8OowrKGhCWm9
 pAzi/3Tnjf7A9nAq+0NeGhkwybckam9ZpGhMyC1E4bp63g6PCoHjTcqOMVnjYxHz
 cUNNQUz7oCjW6tjtpvdJQWZuIGiScNuyxrTYKi8SUpQZ0LQo8nU9DujKcwsKsZed
 gYEIimqOqZnGz1rWs/EP2Y5TSoPVxvnb6nc90gt8kh0nfXYumxKjEmHZ0PB7K97b
 pioCN/THtkDgdYn8j3gnDXZYYa6JA4fKKOw+S6VZraLoVLeDtLo5zK353Rr3BscI
 SddxLePp5WclRal+WulLLJs1FeY5PN3ji+mxC3FAG6cvCqIyosyU8HKG79Lhwwl6
 7qlaDf27BhK71Sf17jzxtc5OwVTkSsY+9iKzVZAw5tIHSLR+nwhjM2vlAVU+oG2r
 KAsuVO1CVAqYbeIBJ85R6bPzgRGxQ0Kmkqwxe1QDVhgXl3eC5Ot5N/bOifv7HzV+
 m+6W1Wdw6/tUKD5g5c6s2WMijXgTdEnfj7dYXmHHN4q1abAKj0cOVjXtmVb90DHM
 5tvfxNurQZCCLo2A88/BYXRd299vBzOy9HAWvMvt5effQfxgFfpC1gc9NkfUTfkA
 FTOQ96vOpOmAH5uA0Xvm
 =850Z
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Continue to refactor the mmc block code to prepare for blkmq
   - Move mmc block debugfs into block module
   - Next step for eMMC CMDQ by adding a new mmc host interface for it
   - Move Kconfig option MMC_DEBUG from core to host
   - Some additional minor improvements

  MMC host:
   - Declare structs as const when applicable
   - Explicitly request exclusive reset control when applicable
   - Improve some error paths and other various cleanups
   - sdhci: Preparations to support SDHCI OMAP
   - sdhci: Improve some PM related code
   - sdhci: Re-factoring and modernizations
   - sdhci-xenon: Add runtime PM and system sleep support
   - sdhci-xenon: Add support for eMMC HS400 Enhanced Strobe
   - sdhci-cadence: Add system sleep support
   - sdhci-of-at91: Improve system sleep support
   - dw_mmc: Add support for Hisilicon hi3660
   - sunxi: Add support for A83T eMMC
   - sunxi: Add support for DDR52 mode
   - meson-gx: Add support for UHS-I SD-cards
   - meson-gx: Cleanups and improvements
   - tmio: Fix CMD12 (STOP) handling
   - tmio: Cleanups and improvements
   - renesas_sdhi: Add r8a7743/5 support
   - renesas-sdhi: Add support for R-Car Gen3 SDHI DMAC
   - renesas_sdhi: Cleanups and improvements"

* tag 'mmc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits)
  mmc: renesas_sdhi: Add r8a7743/5 support
  mmc: meson-gx: fix __ffsdi2 undefined on arm32
  mmc: sdhci-xenon: add runtime pm support and reimplement standby
  mmc: core: Move mmc_start_areq() declaration
  mmc: mmci: stop building qcom dml as module
  mmc: sunxi: Reset the device at probe time
  clk: sunxi-ng: Provide a default reset hook
  mmc: meson-gx: rework tuning function
  mmc: meson-gx: change default tx phase
  mmc: meson-gx: implement voltage switch callback
  mmc: meson-gx: use CCF to handle the clock phases
  mmc: meson-gx: implement card_busy callback
  mmc: meson-gx: simplify interrupt handler
  mmc: meson-gx: work around clk-stop issue
  mmc: meson-gx: fix dual data rate mode frequencies
  mmc: meson-gx: rework clock init function
  mmc: meson-gx: rework clk_set function
  mmc: meson-gx: rework set_ios function
  mmc: meson-gx: cfg init overwrite values
  mmc: meson-gx: initialize sane clk default before clock register
  ...
2017-09-07 12:24:50 -07:00
Bjorn Helgaas
27e87395ae Merge branch 'pci/trivial' into next
* pci/trivial:
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
2017-09-07 13:24:20 -05:00
Bjorn Helgaas
68e8fa46d1 Merge branch 'pci/host-rockchip' into next
* pci/host-rockchip:
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: rockchip: Umap IO space if probe fails
  PCI: rockchip: Remove IRQ domain if probe fails
  PCI: rockchip: Disable vpcie0v9 if resume_noirq fails
  PCI: rockchip: Clean up PHY if driver probe or resume fails
  PCI: rockchip: Factor out rockchip_pcie_deinit_phys()
  PCI: rockchip: Factor out rockchip_pcie_disable_clocks()
  PCI: rockchip: Factor out rockchip_pcie_enable_clocks()
  PCI: rockchip: Factor out rockchip_pcie_setup_irq()
  PCI: rockchip: Use gpiod_set_value_cansleep() to allow reset via expanders
  PCI: rockchip: Use PCI_NUM_INTX
  PCI: rockchip: Explicitly request exclusive reset control
  dt-bindings: phy-rockchip-pcie: Convert to per-lane PHY model
  dt-bindings: PCI: rockchip: Convert to per-lane PHY model
  arm64: dts: rockchip: convert PCIe to use per-lane PHYs for rk3339
  PCI: rockchip: Idle inactive PHY(s)
  phy: rockchip-pcie: Reconstruct driver to support per-lane PHYs
  PCI: rockchip: Add per-lane PHY support
  PCI: rockchip: Factor out rockchip_pcie_get_phys()
  PCI: rockchip: Control optional 12v power supply
  dt-bindings: PCI: rockchip: Add vpcie12v-supply for Rockchip PCIe controller
2017-09-07 13:24:07 -05:00
Bjorn Helgaas
3d499a955a Merge branch 'pci/host-rcar' into next
* pci/host-rcar:
  PCI: rcar: Add device tree support for r8a7743/5
  PCI: rcar: Fix memory leak when no PCIe card is inserted
  PCI: rcar: Fix error exit path
2017-09-07 13:24:05 -05:00
Bjorn Helgaas
cb9d4f0031 Merge branch 'pci/host-qcom' into next
* pci/host-qcom:
  PCI: qcom: Add support for IPQ8074 PCIe controller
  dt-bindings: PCI: qcom: Add support for IPQ8074
  PCI: qcom: Use block IP version for operations
  PCI: qcom: Explicitly request exclusive reset control
  PCI: qcom: Use gpiod_set_value_cansleep() to allow reset via expanders
2017-09-07 13:24:05 -05:00
Bjorn Helgaas
a2efd68120 Merge branch 'pci/host-mediatek' into next
* pci/host-mediatek:
  PCI: mediatek: Use PCI_NUM_INTX
  PCI: mediatek: Add MSI support for MT2712 and MT7622
  PCI: mediatek: Use bus->sysdata to get host private data
  dt-bindings: PCI: Add support for MT2712 and MT7622
  PCI: mediatek: Add controller support for MT2712 and MT7622
  dt-bindings: PCI: Cleanup MediaTek binding text
  dt-bindings: PCI: Rename MediaTek binding
  PCI: mediatek: Switch to use platform_get_resource_byname()
  PCI: mediatek: Add a structure to abstract the controller generations
  PCI: mediatek: Rename port->index and mtk_pcie_parse_ports()
  PCI: mediatek: Use readl_poll_timeout() to wait for Gen2 training
  PCI: mediatek: Explicitly request exclusive reset control
2017-09-07 13:24:03 -05:00
Linus Torvalds
bac65d9d87 powerpc updates for 4.14
Nothing really major this release, despite quite a lot of activity. Just lots of
 things all over the place.
 
 Some things of note include:
 
  - Access via perf to a new type of PMU (IMC) on Power9, which can count both
    core events as well as nest unit events (Memory controller etc).
 
  - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
    Walk Cache (PWC) flushes when the structure of the tree is not changing.
 
  - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
    other architectures where possible.
 
  - Rework of our page table walking so that THP updates only need to send IPIs
    to CPUs where the affected mm has run, rather than all CPUs.
 
  - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
    This avoids problems with the percpu allocator on systems with very sparse
    NUMA layouts.
 
  - STRICT_KERNEL_RWX support on PPC32.
 
  - A new sched domain topology for Power9, to capture the fact that pairs of
    cores may share an L2 cache.
 
  - Power9 support for VAS, which is a new mechanism for accessing coprocessors,
    and initial support for using it with the NX compression accelerator.
 
  - Major work on the instruction emulation support, adding support for many new
    instructions, and reworking it so it can be used to implement the emulation
    needed to fixup alignment faults.
 
  - Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
 
 And probably that many things again that are almost as interesting, but I had to
 keep the list short. Plus the usual fixes and cleanups as always.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
   Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
   Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
   Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
   Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
   Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
   Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
   Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
   Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
   Victor Aoqui.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZr83SAAoJEFHr6jzI4aWA6pUP/3CEaj2bSxNzWIwidqyYjuoS
 O1moEsP0oYH7eBEWVHalYxvo0QPIIAhbFPaFyrOrgtfDH01Szwu9LcCALGb8orC5
 Hg3IY8mpNG3Q1T8wEtTa56Ik4b5ZFty35S5+X9qLNSFoDUqSvGlSsLzhPNN7f2tl
 XFm2hWqd8wXCwDsuVSFBCF61M3SAm+g6NMVNJ+VL2KIDCwBrOZLhKDPRoxLTAuMa
 jjSdjVIozWyXjUrBFi8HVcoOWLxcT1HsNF0tRs51LwY/+Mlj2jAtFtsx+a06HZa6
 f2p/Kcp/MEispSTk064Ap9cC1seXWI18zwZKpCUFqu0Ec2yTAiGdjOWDyYQldIp+
 ttVPSHQ01YrVKwDFTtM9CiA0EET6fVPhWgAPkPfvH5TvtKwGkNdy0b+nQLuWrYip
 BUmOXmjdIG3nujCzA9sv6/uNNhjhj2y+HWwuV7Qo002VFkhgZFL67u2SSUQLpYPj
 PxdkY8pPVq+O+in94oDV3c36dYFF6+g6A6505Vn6eKUm/TLpszRFGkS3bKKA5vtn
 74FR+guV/5RwYJcdZbfm04DgAocl7AfUDxpwRxibt6KtAK2VZKQuw4ugUTgYEd7W
 mL2+AMmPKuajWXAMTHjCZPbUp9gFNyYyBQTFfGVX/XLiM8erKBnGfoa1/KzUJkhr
 fVZLYIO/gzl34PiTIfgD
 =UJtt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...
2017-09-07 10:15:40 -07:00
Radim Krčmář
082d3900a4 KVM/ARM Changes for v4.14
Two minor cleanups and improvements, a fix for decoding external abort
 types from guests, and added support for migrating the active priority
 of interrupts when running a GICv2 guest on a GICv3 host.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZrsRdAAoJEEtpOizt6ddyoDIH/i94Wc5Iw9mpzi99NXyDGxYb
 2kEGg8uRZFuAwK49+aNVEqL7pPymlV3qdl1fdsmWM9ch9D8WOiezx5JgSd3+uriF
 x2Cc6kxZQJ4/UT3laAZArVcGnQqDHdOrJIsOZ9f+UFRiFazlMVMgAJX7yQwHYiBQ
 QM/z5BbLSbh+NHAv15utz85JjR8lFL7AIzPemHR6Zh7cr3XmeW3nadaYMuyqjFsZ
 aYD4S+y/eRw6HkImV/DaaLv/tDrOEU2cQOqi19TvfYpx/XW4uLQA9oxS9Qd9ADZw
 T8Ha5jGEthy+3mzwEmGFwTVGpbvt3TYavZ743lp230PODYOkfO+ETbIlstuYNb4=
 =dIG3
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

KVM/ARM Changes for v4.14

Two minor cleanups and improvements, a fix for decoding external abort
types from guests, and added support for migrating the active priority
of interrupts when running a GICv2 guest on a GICv3 host.
2017-09-07 18:22:04 +02:00
Radim Krčmář
6e0ff1b4db KVM: s390: Fixes and features for 4.14
- merge of topic branch tlb-flushing from the s390 tree to get the
   no-dat base features
 - merge of kvm/master to avoid conflicts with additional sthyi fixes
 - wire up the no-dat enhancements in KVM
 - multiple epoch facility (z14 feature)
 - Configuration z/Architecture Mode
 - more sthyi fixes
 - gdb server range checking fix
 - small code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJZqQt+AAoJEBF7vIC1phx82jcP/0PgDUFpyaq50R1LhoLoXfsv
 55x8hZFJzkBTapv6ckb9MP1J90htbmYXUDbgk/JS7ElenLvLw6r9QenHJnLYRoJ4
 s4ApooG5/wpbQWdxfqZaNHZEV1/Fgvv+R348k8cFfhrzJdOd0p7I+qkd5FOX2VTl
 NGk+cR03yhtPOYeUb90k40k0kGmY7acdnYe2txUoh7qC38vPVwMJA6S01mWbB3sm
 ApQN9hzGvXhT833dVTNMS33uCds/9nCHtMn0viqTfs9AWKIs62nK4L54c5dgZWpH
 u7+ji5OUEbV+8QQH5G1OmWUIo3sKO5MVS0P9jbh0bIIdUZvUKdchFP8bQcmde02E
 IgYgjbgmKc8Zec+Z0PHs5Gy+VbGXpqg0nvwyzK96fh/KM7aepxHUfDOdWWj8qbgI
 4sc2fe5JFkP5IldYgJlMPSm4GqLNDkbGFnLralkaqhRvjS1sNjgXxcCclLQQaI5H
 kMklzkNpMQ9yC7pYLjq7AKOzmMdHqq90rAIq0zQSYQjMoiC2RLYFyjFwsK3KlmeJ
 GRgYrIZOVkYONZhT4F81piGcuRsbCGSXZ5I5i/QxJ/EgNGO8EcGrrONAk1NW9Dsp
 q9qu/aKXOzGe57jjP+MonH4bcrHLCmcpkxS9sgiECu0PtutzbGdZPUXA9Pj9YMON
 7kQXrwPgEHhn62+l/JdO
 =N/6G
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux

KVM: s390: Fixes and features for 4.14

- merge of topic branch tlb-flushing from the s390 tree to get the
  no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
2017-09-07 16:46:46 +02:00
Linus Torvalds
3b9f8ed25d Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "Except for the ahci fix that fixes a boot issue, nothing major in this
  pull request. Some new platform controller support and device specific
  changes"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: zpodd: make arrays cdb static, reduces object code size
  ahci: don't use MSI for devices with the silly Intel NVMe remapping scheme
  dt-bindings: ata: add DT bindings for MediaTek SATA controller
  ata: mediatek: add support for MediaTek SATA controller
  pata_octeon_cf: use of_property_read_{bool|u32}()
  cs5536: add support for IDE controller variant
  ata: sata_gemini: Introduce explicit IDE pin control
  ata: sata_gemini: Retire custom pin control
  ata: ahci_platform: Add shutdown handler
  ata: sata_gemini: explicitly request exclusive reset control
  ata: Drop unnecessary static
  ata: Convert to using %pOF instead of full_name
2017-09-06 22:41:21 -07:00
Linus Torvalds
608c1d3c17 Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "Several notable changes this cycle:

   - Thread mode was merged. This will be used for cgroup2 support for
     CPU and possibly other controllers. Unfortunately, CPU controller
     cgroup2 support didn't make this pull request but most contentions
     have been resolved and the support is likely to be merged before
     the next merge window.

   - cgroup.stat now shows the number of descendant cgroups.

   - cpuset now can enable the easier-to-configure v2 behavior on v1
     hierarchy"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  cpuset: Allow v2 behavior in v1 cgroup
  cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup
  cgroup: remove unneeded checks
  cgroup: misc changes
  cgroup: short-circuit cset_cgroup_from_root() on the default hierarchy
  cgroup: re-use the parent pointer in cgroup_destroy_locked()
  cgroup: add cgroup.stat interface with basic hierarchy stats
  cgroup: implement hierarchy limits
  cgroup: keep track of number of descent cgroups
  cgroup: add comment to cgroup_enable_threaded()
  cgroup: remove unnecessary empty check when enabling threaded mode
  cgroup: update debug controller to print out thread mode information
  cgroup: implement cgroup v2 thread support
  cgroup: implement CSS_TASK_ITER_THREADED
  cgroup: introduce cgroup->dom_cgrp and threaded css_set handling
  cgroup: add @flags to css_task_iter_start() and implement CSS_TASK_ITER_PROCS
  cgroup: reorganize cgroup.procs / task write path
  cgroup: replace css_set walking populated test with testing cgrp->nr_populated_csets
  cgroup: distinguish local and children populated states
  cgroup: remove now unused list_head @pending in cgroup_apply_cftypes()
  ...
2017-09-06 22:25:25 -07:00
Linus Torvalds
9954d4892a Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
 "Nothing major. I introduced a flag collsion bug during v4.13 cycle
  which is fixed in this pull request. Fortunately, the flag is for
  debugging / verification and the bug isn't critical"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Fix flag collision
  workqueue: Use TASK_IDLE
  workqueue: fix path to documentation
  workqueue: doc change for ST behavior on NUMA systems
2017-09-06 21:59:31 -07:00
Baruch Siach
9a94b3a4bd dt-binding: phy: don't confuse with Ethernet phy properties
The generic PHY 'phys' property sometime appears in the same node with
the Ethernet PHY 'phy' or 'phy-handle' properties. Add a warning in
phy-bindings.txt to reduce confusion.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06 21:13:54 -07:00
Linus Torvalds
d34fc1adf0 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - various misc bits

 - DAX updates

 - OCFS2

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (119 commits)
  mm,fork: introduce MADV_WIPEONFORK
  x86,mpx: make mpx depend on x86-64 to free up VMA flag
  mm: add /proc/pid/smaps_rollup
  mm: hugetlb: clear target sub-page last when clearing huge page
  mm: oom: let oom_reap_task and exit_mmap run concurrently
  swap: choose swap device according to numa node
  mm: replace TIF_MEMDIE checks by tsk_is_oom_victim
  mm, oom: do not rely on TIF_MEMDIE for memory reserves access
  z3fold: use per-cpu unbuddied lists
  mm, swap: don't use VMA based swap readahead if HDD is used as swap
  mm, swap: add sysfs interface for VMA based swap readahead
  mm, swap: VMA based swap readahead
  mm, swap: fix swap readahead marking
  mm, swap: add swap readahead hit statistics
  mm/vmalloc.c: don't reinvent the wheel but use existing llist API
  mm/vmstat.c: fix wrong comment
  selftests/memfd: add memfd_create hugetlbfs selftest
  mm/shmem: add hugetlbfs support to memfd_create()
  mm, devm_memremap_pages: use multi-order radix for ZONE_DEVICE lookups
  mm/vmalloc.c: halve the number of comparisons performed in pcpu_get_vm_areas()
  ...
2017-09-06 20:49:49 -07:00
Daniel Colascione
493b0e9d94 mm: add /proc/pid/smaps_rollup
/proc/pid/smaps_rollup is a new proc file that improves the performance
of user programs that determine aggregate memory statistics (e.g., total
PSS) of a process.

Android regularly "samples" the memory usage of various processes in
order to balance its memory pool sizes.  This sampling process involves
opening /proc/pid/smaps and summing certain fields.  For very large
processes, sampling memory use this way can take several hundred
milliseconds, due mostly to the overhead of the seq_printf calls in
task_mmu.c.

smaps_rollup improves the situation.  It contains most of the fields of
/proc/pid/smaps, but instead of a set of fields for each VMA,
smaps_rollup instead contains one synthetic smaps-format entry
representing the whole process.  In the single smaps_rollup synthetic
entry, each field is the summation of the corresponding field in all of
the real-smaps VMAs.  Using a common format for smaps_rollup and smaps
allows userspace parsers to repurpose parsers meant for use with
non-rollup smaps for smaps_rollup, and it allows userspace to switch
between smaps_rollup and smaps at runtime (say, based on the
availability of smaps_rollup in a given kernel) with minimal fuss.

By using smaps_rollup instead of smaps, a caller can avoid the
significant overhead of formatting, reading, and parsing each of a large
process's potentially very numerous memory mappings.  For sampling
system_server's PSS in Android, we measured a 12x speedup, representing
a savings of several hundred milliseconds.

One alternative to a new per-process proc file would have been including
PSS information in /proc/pid/status.  We considered this option but
thought that PSS would be too expensive (by a few orders of magnitude)
to collect relative to what's already emitted as part of
/proc/pid/status, and slowing every user of /proc/pid/status for the
sake of readers that happen to want PSS feels wrong.

The code itself works by reusing the existing VMA-walking framework we
use for regular smaps generation and keeping the mem_size_stats
structure around between VMA walks instead of using a fresh one for each
VMA.  In this way, summation happens automatically.  We let seq_file
walk over the VMAs just as it does for regular smaps and just emit
nothing to the seq_file until we hit the last VMA.

Benchmarks:

    using smaps:
    iterations:1000 pid:1163 pss:220023808
    0m29.46s real 0m08.28s user 0m20.98s system

    using smaps_rollup:
    iterations:1000 pid:1163 pss:220702720
    0m04.39s real 0m00.03s user 0m04.31s system

We're using the PSS samples we collect asynchronously for
system-management tasks like fine-tuning oom_adj_score, memory use
tracking for debugging, application-level memory-use attribution, and
deciding whether we want to kill large processes during system idle
maintenance windows.  Android has been using PSS for these purposes for
a long time; as the average process VMA count has increased and and
devices become more efficiency-conscious, PSS-collection inefficiency
has started to matter more.  IMHO, it'd be a lot safer to optimize the
existing PSS-collection model, which has been fine-tuned over the years,
instead of changing the memory tracking approach entirely to work around
smaps-generation inefficiency.

Tim said:

: There are two main reasons why Android gathers PSS information:
:
: 1. Android devices can show the user the amount of memory used per
:    application via the settings app.  This is a less important use case.
:
: 2. We log PSS to help identify leaks in applications.  We have found
:    an enormous number of bugs (in the Android platform, in Google's own
:    apps, and in third-party applications) using this data.
:
: To do this, system_server (the main process in Android userspace) will
: sample the PSS of a process three seconds after it changes state (for
: example, app is launched and becomes the foreground application) and about
: every ten minutes after that.  The net result is that PSS collection is
: regularly running on at least one process in the system (usually a few
: times a minute while the screen is on, less when screen is off due to
: suspend).  PSS of a process is an incredibly useful stat to track, and we
: aren't going to get rid of it.  We've looked at some very hacky approaches
: using RSS ("take the RSS of the target process, subtract the RSS of the
: zygote process that is the parent of all Android apps") to reduce the
: accounting time, but it regularly overestimated the memory used by 20+
: percent.  Accordingly, I don't think that there's a good alternative to
: using PSS.
:
: We started looking into PSS collection performance after we noticed random
: frequency spikes while a phone's screen was off; occasionally, one of the
: CPU clusters would ramp to a high frequency because there was 200-300ms of
: constant CPU work from a single thread in the main Android userspace
: process.  The work causing the spike (which is reasonable governor
: behavior given the amount of CPU time needed) was always PSS collection.
: As a result, Android is burning more power than we should be on PSS
: collection.
:
: The other issue (and why I'm less sure about improving smaps as a
: long-term solution) is that the number of VMAs per process has increased
: significantly from release to release.  After trying to figure out why we
: were seeing these 200-300ms PSS collection times on Android O but had not
: noticed it in previous versions, we found that the number of VMAs in the
: main system process increased by 50% from Android N to Android O (from
: ~1800 to ~2700) and varying increases in every userspace process.  Android
: M to N also had an increase in the number of VMAs, although not as much.
: I'm not sure why this is increasing so much over time, but thinking about
: ASLR and ways to make ASLR better, I expect that this will continue to
: increase going forward.  I would not be surprised if we hit 5000 VMAs on
: the main Android process (system_server) by 2020.
:
: If we assume that the number of VMAs is going to increase over time, then
: doing anything we can do to reduce the overhead of each VMA during PSS
: collection seems like the right way to go, and that means outputting an
: aggregate statistic (to avoid whatever overhead there is per line in
: writing smaps and in reading each line from userspace).

Link: http://lkml.kernel.org/r/20170812022148.178293-1-dancol@google.com
Signed-off-by: Daniel Colascione <dancol@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:30 -07:00
Aaron Lu
a2468cc9bf swap: choose swap device according to numa node
If the system has more than one swap device and swap device has the node
information, we can make use of this information to decide which swap
device to use in get_swap_pages() to get better performance.

The current code uses a priority based list, swap_avail_list, to decide
which swap device to use and if multiple swap devices share the same
priority, they are used round robin.  This patch changes the previous
single global swap_avail_list into a per-numa-node list, i.e.  for each
numa node, it sees its own priority based list of available swap
devices.  Swap device's priority can be promoted on its matching node's
swap_avail_list.

The current swap device's priority is set as: user can set a >=0 value,
or the system will pick one starting from -1 then downwards.  The
priority value in the swap_avail_list is the negated value of the swap
device's due to plist being sorted from low to high.  The new policy
doesn't change the semantics for priority >=0 cases, the previous
starting from -1 then downwards now becomes starting from -2 then
downwards and -1 is reserved as the promoted value.

Take 4-node EX machine as an example, suppose 4 swap devices are
available, each sit on a different node:
swapA on node 0
swapB on node 1
swapC on node 2
swapD on node 3

After they are all swapped on in the sequence of ABCD.

Current behaviour:
their priorities will be:
swapA: -1
swapB: -2
swapC: -3
swapD: -4
And their position in the global swap_avail_list will be:
swapA   -> swapB   -> swapC   -> swapD
prio:1     prio:2     prio:3     prio:4

New behaviour:
their priorities will be(note that -1 is skipped):
swapA: -2
swapB: -3
swapC: -4
swapD: -5
And their positions in the 4 swap_avail_lists[nid] will be:
swap_avail_lists[0]: /* node 0's available swap device list */
swapA   -> swapB   -> swapC   -> swapD
prio:1     prio:3     prio:4     prio:5
swap_avali_lists[1]: /* node 1's available swap device list */
swapB   -> swapA   -> swapC   -> swapD
prio:1     prio:2     prio:4     prio:5
swap_avail_lists[2]: /* node 2's available swap device list */
swapC   -> swapA   -> swapB   -> swapD
prio:1     prio:2     prio:3     prio:5
swap_avail_lists[3]: /* node 3's available swap device list */
swapD   -> swapA   -> swapB   -> swapC
prio:1     prio:2     prio:3     prio:4

To see the effect of the patch, a test that starts N process, each mmap
a region of anonymous memory and then continually write to it at random
position to trigger both swap in and out is used.

On a 2 node Skylake EP machine with 64GiB memory, two 170GB SSD drives
are used as swap devices with each attached to a different node, the
result is:

runtime=30m/processes=32/total test size=128G/each process mmap region=4G
kernel         throughput
vanilla        13306
auto-binding   15169 +14%

runtime=30m/processes=64/total test size=128G/each process mmap region=2G
kernel         throughput
vanilla        11885
auto-binding   14879 +25%

[aaron.lu@intel.com: v2]
  Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com
  Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com
[akpm@linux-foundation.org: use kmalloc_array()]
Link: http://lkml.kernel.org/r/20170814053130.GD2369@aaronlu.sh.intel.com
Link: http://lkml.kernel.org/r/20170816024439.GA10925@aaronlu.sh.intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:30 -07:00
Huang Ying
d9bfcfdc41 mm, swap: add sysfs interface for VMA based swap readahead
The sysfs interface to control the VMA based swap readahead is added as
follow,

/sys/kernel/mm/swap/vma_ra_enabled

Enable the VMA based swap readahead algorithm, or use the original
global swap readahead algorithm.

/sys/kernel/mm/swap/vma_ra_max_order

Set the max order of the readahead window size for the VMA based swap
readahead algorithm.

The corresponding ABI documentation is added too.

Link: http://lkml.kernel.org/r/20170807054038.1843-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:29 -07:00
Jan Kara
26b433d0da fscache: remove unused ->now_uncached callback
Patch series "Ranged pagevec lookup", v2.

In this series I make pagevec_lookup() update the index (to be
consistent with pagevec_lookup_tag() and also as a preparation for
ranged lookups), provide ranged variant of pagevec_lookup() and use it
in places where it makes sense.  This not only removes some common code
but is also a measurable performance win for some use cases (see patch
4/10) where radix tree is sparse and searching & grabing of a page after
the end of the range has measurable overhead.

This patch (of 10):

The callback doesn't ever get called.  Remove it.

Link: http://lkml.kernel.org/r/20170726114704.7626-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:26 -07:00
Michal Hocko
c9bff3eebc mm, page_alloc: rip out ZONELIST_ORDER_ZONE
Patch series "cleanup zonelists initialization", v1.

This is aimed at cleaning up the zonelists initialization code we have
but the primary motivation was bug report [2] which got resolved but the
usage of stop_machine is just too ugly to live.  Most patches are
straightforward but 3 of them need a special consideration.

Patch 1 removes zone ordered zonelists completely.  I am CCing linux-api
because this is a user visible change.  As I argue in the patch
description I do not think we have a strong usecase for it these days.
I have kept sysctl in place and warn into the log if somebody tries to
configure zone lists ordering.  If somebody has a real usecase for it we
can revert this patch but I do not expect anybody will actually notice
runtime differences.  This patch is not strictly needed for the rest but
it made patch 6 easier to implement.

Patch 7 removes stop_machine from build_all_zonelists without adding any
special synchronization between iterators and updater which I _believe_
is acceptable as explained in the changelog.  I hope I am not missing
anything.

Patch 8 then removes zonelists_mutex which is kind of ugly as well and
not really needed AFAICS but a care should be taken when double checking
my thinking.

This patch (of 9):

Supporting zone ordered zonelists costs us just a lot of code while the
usefulness is arguable if existent at all.  Mel has already made node
ordering default on 64b systems.  32b systems are still using
ZONELIST_ORDER_ZONE because it is considered better to fallback to a
different NUMA node rather than consume precious lowmem zones.

This argument is, however, weaken by the fact that the memory reclaim
has been reworked to be node rather than zone oriented.  This means that
lowmem requests have to skip over all highmem pages on LRUs already and
so zone ordering doesn't save the reclaim time much.  So the only
advantage of the zone ordering is under a light memory pressure when
highmem requests do not ever hit into lowmem zones and the lowmem
pressure doesn't need to reclaim.

Considering that 32b NUMA systems are rather suboptimal already and it
is generally advisable to use 64b kernel on such a HW I believe we
should rather care about the code maintainability and just get rid of
ZONELIST_ORDER_ZONE altogether.  Keep systcl in place and warn if
somebody tries to set zone ordering either from kernel command line or
the sysctl.

[mhocko@suse.com: reading vm.numa_zonelist_order will never terminate]
Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:25 -07:00
Minchan Kim
5a47074f02 zram: add config and doc file for writeback feature
This patch adds document and kconfig for using of writeback feature.

Link: http://lkml.kernel.org/r/1498459987-24562-10-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Juneho Choi <juno.choi@lge.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:25 -07:00
Ross Zwisler
91d25ba8a6 dax: use common 4k zero page for dax mmap reads
When servicing mmap() reads from file holes the current DAX code
allocates a page cache page of all zeroes and places the struct page
pointer in the mapping->page_tree radix tree.

This has three major drawbacks:

1) It consumes memory unnecessarily. For every 4k page that is read via
   a DAX mmap() over a hole, we allocate a new page cache page. This
   means that if you read 1GiB worth of pages, you end up using 1GiB of
   zeroed memory. This is easily visible by looking at the overall
   memory consumption of the system or by looking at /proc/[pid]/smaps:

	7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:             1048576 kB
	Pss:             1048576 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:   1048576 kB
	Private_Dirty:         0 kB
	Referenced:      1048576 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

2) It is slower than using a common zero page because each page fault
   has more work to do. Instead of just inserting a common zero page we
   have to allocate a page cache page, zero it, and then insert it. Here
   are the average latencies of dax_load_hole() as measured by ftrace on
   a random test box:

    Old method, using zeroed page cache pages:	3.4 us
    New method, using the common 4k zero page:	0.8 us

   This was the average latency over 1 GiB of sequential reads done by
   this simple fio script:

     [global]
     size=1G
     filename=/root/dax/data
     fallocate=none
     [io]
     rw=read
     ioengine=mmap

3) The fact that we had to check for both DAX exceptional entries and
   for page cache pages in the radix tree made the DAX code more
   complex.

Solve these issues by following the lead of the DAX PMD code and using a
common 4k zero page instead.  As with the PMD code we will now insert a
DAX exceptional entry into the radix tree instead of a struct page
pointer which allows us to remove all the special casing in the DAX
code.

Note that we do still pretty aggressively check for regular pages in the
DAX radix tree, especially where we take action based on the bits set in
the page.  If we ever find a regular page in our radix tree now that
most likely means that someone besides DAX is inserting pages (which has
happened lots of times in the past), and we want to find that out early
and fail loudly.

This solution also removes the extra memory consumption.  Here is that
same /proc/[pid]/smaps after 1GiB of reading from a hole with the new
code:

	7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:                   0 kB
	Pss:                   0 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:         0 kB
	Private_Dirty:         0 kB
	Referenced:            0 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

Overall system memory consumption is similarly improved.

Another major change is that we remove dax_pfn_mkwrite() from our fault
flow, and instead rely on the page fault itself to make the PTE dirty
and writeable.  The following description from the patch adding the
vm_insert_mixed_mkwrite() call explains this a little more:

   "To be able to use the common 4k zero page in DAX we need to have our
    PTE fault path look more like our PMD fault path where a PTE entry
    can be marked as dirty and writeable as it is first inserted rather
    than waiting for a follow-up dax_pfn_mkwrite() =>
    finish_mkwrite_fault() call.

    Right now we can rely on having a dax_pfn_mkwrite() call because we
    can distinguish between these two cases in do_wp_page():

            case 1: 4k zero page => writable DAX storage
            case 2: read-only DAX storage => writeable DAX storage

    This distinction is made by via vm_normal_page(). vm_normal_page()
    returns false for the common 4k zero page, though, just as it does
    for DAX ptes. Instead of special casing the DAX + 4k zero page case
    we will simplify our DAX PTE page fault sequence so that it matches
    our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper.
    We will instead use dax_iomap_fault() to handle write-protection
    faults.

    This means that insert_pfn() needs to follow the lead of
    insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If
    'mkwrite' is set insert_pfn() will do the work that was previously
    done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path"

Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-06 17:27:24 -07:00
Linus Torvalds
80cee03bf1 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.14:

  API:
   - Defer scompress scratch buffer allocation to first use.
   - Add __crypto_xor that takes separte src and dst operands.
   - Add ahash multiple registration interface.
   - Revamped aead/skcipher algif code to fix async IO properly.

  Drivers:
   - Add non-SIMD fallback code path on ARM for SVE.
   - Add AMD Security Processor framework for ccp.
   - Add support for RSA in ccp.
   - Add XTS-AES-256 support for CCP version 5.
   - Add support for PRNG in sun4i-ss.
   - Add support for DPAA2 in caam.
   - Add ARTPEC crypto support.
   - Add Freescale RNGC hwrng support.
   - Add Microchip / Atmel ECC driver.
   - Add support for STM32 HASH module"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
  crypto: af_alg - get_page upon reassignment to TX SGL
  crypto: cavium/nitrox - Fix an error handling path in 'nitrox_probe()'
  crypto: inside-secure - fix an error handling path in safexcel_probe()
  crypto: rockchip - Don't dequeue the request when device is busy
  crypto: cavium - add release_firmware to all return case
  crypto: sahara - constify platform_device_id
  MAINTAINERS: Add ARTPEC crypto maintainer
  crypto: axis - add ARTPEC-6/7 crypto accelerator driver
  crypto: hash - add crypto_(un)register_ahashes()
  dt-bindings: crypto: add ARTPEC crypto
  crypto: algif_aead - fix comment regarding memory layout
  crypto: ccp - use dma_mapping_error to check map error
  lib/mpi: fix build with clang
  crypto: sahara - Remove leftover from previous used spinlock
  crypto: sahara - Fix dma unmap direction
  crypto: af_alg - consolidation of duplicate code
  crypto: caam - Remove unused dentry members
  crypto: ccp - select CONFIG_CRYPTO_RSA
  crypto: ccp - avoid uninitialized variable warning
  crypto: serpent - improve __serpent_setkey with UBSAN
  ...
2017-09-06 15:17:17 -07:00
Linus Torvalds
aae3dbb477 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...
2017-09-06 14:45:08 -07:00
Linus Torvalds
ec3604c7a5 Writeback error handling fixes for v4.14
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZrTy3AAoJEAAOaEEZVoIVaucP/ApBAj2S5wzvlV1u6l8E6ae7
 ZeEEZfcWwzRYlKjZAkTWqj9XvGpDGO5gLq4wsZK2edFAq++/MJF8ZVtN4tdZ1kUZ
 DUvRodtVOrT08Kp9wZXGT7JOFrf6U/6gMcR6p0MuWnHndeKYvlpcFi9NPT4EC9/z
 Zm9V7gtlPdSOha7eaSjUS0+vLERkxqXLBW3Av9QUOBP/lbI3lqIroGKeHDYnVdya
 2P/k5EcRRJMyJP6TqyYxmmJl+UWjJFMLvnlUDBslHnD/u3mIUhw3JLHYBjn5dZRE
 Xjq56IDPoXDUvzlBhtn/Uqyx+/wtwsNsylpmKv6K5G1JfdeuSsPVsCey+A1cqV64
 LpE5896wf9TmnmI9LNyh6vDn925xPSGBiF45UEp5f9aO7jXeY0MaEZ8g+ENqFIDK
 v4gtZdS9FhYHV+/l4qEwYMKrqSbwKEs1r1FT+f4wnABby1ojfdA57ZPlp5PV2Vjp
 szTp88Zkb7cMvZwEnWwxWofcJNmgS7uNahvnQF3IJ4ITsioEkuyYR3K4ZQMaaaV9
 wCp6G0FhXZaK3OI7o9WiDwaO2elp9Hxc8bnqKpiBbHZkY0NLh7/++5VxpeNbTHFy
 AGijQiiKGNNyYqNj93wq9jpVdMNjB0pXrHRxfav8v7MtQ+WfbEoAENF4T7hN7iXn
 UuF6eSWEC5O1UCRUk1A+
 =LLY3
 -----END PGP SIGNATURE-----

Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull writeback error handling updates from Jeff Layton:
 "This pile continues the work from last cycle on better tracking
  writeback errors. In v4.13 we added some basic errseq_t infrastructure
  and converted a few filesystems to use it.

  This set continues refining that infrastructure, adds documentation,
  and converts most of the other filesystems to use it. The main
  exception at this point is the NFS client"

* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  ecryptfs: convert to file_write_and_wait in ->fsync
  mm: remove optimizations based on i_size in mapping writeback waits
  fs: convert a pile of fsync routines to errseq_t based reporting
  gfs2: convert to errseq_t based writeback error reporting for fsync
  fs: convert sync_file_range to use errseq_t based error-tracking
  mm: add file_fdatawait_range and file_write_and_wait
  fuse: convert to errseq_t based error tracking for fsync
  mm: consolidate dax / non-dax checks for writeback
  Documentation: add some docs for errseq_t
  errseq: rename __errseq_set to errseq_set
2017-09-06 14:11:03 -07:00
Vinod Koul
41bd0314fa Merge branch 'topic/dmatest' into for-linus 2017-09-06 21:55:10 +05:30
Vinod Koul
346ea25e81 Merge branch 'topic/qcom' into for-linus 2017-09-06 21:54:48 +05:30
Vinod Koul
f6cc35eefe Merge branch 'topic/ioat' into for-linus 2017-09-06 21:54:16 +05:30
Olof Johansson
b884026a2b Merge branch 'next/dt64' into next/dt
* next/dt64: (233 commits)
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  arm64: dts: rockchip: add rk3328-rock64 board
  arm64: dts: rockchip: add rk3328 pdm node
  ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
  ARM64: dts: meson-gx: Add AO CEC nodes
  ARM64: dts: meson-gx: update AO clkc to new bindings
  arm64: dts: rockchip: add more rk3399 iommu nodes
  arm64: dts: rockchip: add rk3368 iommu nodes
  arm64: dts: rockchip: add rk3328 iommu nodes
  arm64: zynqmp: Add generic compatible string for I2C EEPROM
  ...
2017-09-05 20:41:43 -07:00
Linus Torvalds
439644096c Power management updates for v4.14-rc1
- Drop the P-state selection algorithm based on a PID controller
    from intel_pstate and make it use the same P-state selection
    method (based on the CPU load) for all types of systems in the
    active mode (Rafael Wysocki, Srinivas Pandruvada).
 
  - Rework the cpufreq core and governors to make it possible to
    take cross-CPU utilization updates into account and modify the
    schedutil governor to actually do so (Viresh Kumar).
 
  - Clean up the handling of transition latency information in the
    cpufreq core and untangle it from the information on which drivers
    cannot do dynamic frequency switching (Viresh Kumar).
 
  - Add support for new SoCs (MT2701/MT7623 and MT7622) to the
    mediatek cpufreq driver and update its DT bindings (Sean Wang).
 
  - Modify the cpufreq dt-platdev driver to autimatically create
    cpufreq devices for the new (v2) Operating Performance Points
    (OPP) DT bindings and update its whitelist of supported systems
    (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen,
    Finley Xiao).
 
  - Add support for Ux500 to the cpufreq-dt driver and drop the
    obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).
 
  - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
    Nguyen).
 
  - Fix and clean up assorted issues in the cpufreq drivers and core
    (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
    Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).
 
  - Update the IO-wait boost handling in the schedutil governor to
    make it less aggressive (Joel Fernandes).
 
  - Rework system suspend diagnostics to make it print fewer messages
    to the kernel log by default, add a sysfs knob to allow more
    suspend-related messages to be printed and add Low Power S0 Idle
    constraints checks to the ACPI suspend-to-idle code (Rafael
    Wysocki, Srinivas Pandruvada).
 
  - Prefer suspend-to-idle over S3 on ACPI-based systems with the
    ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
    interface present in the ACPI tables (Rafael Wysocki).
 
  - Update documentation related to system sleep and rename a number
    of items in the code to make it cleare that they are related to
    suspend-to-idle (Rafael Wysocki).
 
  - Export a variable allowing device drivers to check the target
    system sleep state from the core system suspend code (Florian
    Fainelli).
 
  - Clean up the cpuidle subsystem to handle the polling state on
    x86 in a more straightforward way and to use %pOF instead of
    full_name (Rafael Wysocki, Rob Herring).
 
  - Update the devfreq framework to fix and clean up a few minor
    issues (Chanwoo Choi, Rob Herring).
 
  - Extend diagnostics in the generic power domains (genpd) framework
    and clean it up slightly (Thara Gopinath, Rob Herring).
 
  - Fix and clean up a couple of issues in the operating performance
    points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).
 
  - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
    (AVS) driver (David Wu).
 
  - Fix the usage of notifiers in CPU power management on some
    platforms (Alex Shi).
 
  - Update the pm-graph system suspend/hibernation and boot profiling
    utility (Todd Brandt).
 
  - Make it possible to run the cpupower utility without CPU0 (Prarit
    Bhargava).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZrcDJAAoJEILEb/54YlRx9FUQAIUKvWBAARc61ZIZXjbqZF1v
 aEMOBuksFns0CMekdptSic6n4wc81E/XYMS8yDhOOMpyDzfAZsTWjmu+gKwN7w3l
 E/yf/NVlhob9JZ7MqGgqD4EUFfFIaKBXPlWFdDi2rdCUXE2L8xJ7rla8i7zyZlc5
 pYHfAppBbF4qUcEY4OoOVOOGRZCfMdiLXj0iZOhMX8Y6yLBRk/AjnVADYsF33hoj
 gBEfomU+H0K5V8nQEp0ZFKDArPwL+oElHQj6i+nxBpGfPM5evvLXhHOyR6AsldJ5
 J4YI1kMuQNSCmvHMqOTxTYyJf8Jcf3Fj4wcjwaVMVGceY1lz6McAKknnFnCqCvz+
 mskn84gFCBCM8EoJDqRf0b9MQHcuRyQKM+yw4tjnR9r8yd32erb85ZWFHcPWYhCT
 fZatNOwFFv2MU+2vo5J3yeUNSWIKT+uBjy+tKPbrDkUwpKZVRj3Oj+hP3Mq9NE8U
 YBqltsj7tmrdA634zI8C7jfS6wF221S0fId/iPszwmPJaVn/lq8Ror7pWL5YI8U7
 SCJFjiqDiGmAcQEkuWwFAQnscZkyHpO+Y3A+jfXl/izoaZETaI5+ceIHBaocm3+5
 XrOOpHS3ik8EHf9ji0KFCKZ/pYDwllday3cBQPWo3sMIzpQ2lrjbqdnE1cVnBrld
 OtHZAeD/jLUXuY6XW2jN
 =mAiV
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "This time (again) cpufreq gets the majority of changes which mostly
  are driver updates (including a major consolidation of intel_pstate),
  some schedutil governor modifications and core cleanups.

  There also are some changes in the system suspend area, mostly related
  to diagnostics and debug messages plus some renames of things related
  to suspend-to-idle. One major change here is that suspend-to-idle is
  now going to be preferred over S3 on systems where the ACPI tables
  indicate to do so and provide requsite support (the Low Power Idle S0
  _DSM in particular). The system sleep documentation and the tools
  related to it are updated too.

  The rest is a few cpuidle changes (nothing major), devfreq updates,
  generic power domains (genpd) framework updates and a few assorted
  modifications elsewhere.

  Specifics:

   - Drop the P-state selection algorithm based on a PID controller from
     intel_pstate and make it use the same P-state selection method
     (based on the CPU load) for all types of systems in the active mode
     (Rafael Wysocki, Srinivas Pandruvada).

   - Rework the cpufreq core and governors to make it possible to take
     cross-CPU utilization updates into account and modify the schedutil
     governor to actually do so (Viresh Kumar).

   - Clean up the handling of transition latency information in the
     cpufreq core and untangle it from the information on which drivers
     cannot do dynamic frequency switching (Viresh Kumar).

   - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek
     cpufreq driver and update its DT bindings (Sean Wang).

   - Modify the cpufreq dt-platdev driver to autimatically create
     cpufreq devices for the new (v2) Operating Performance Points (OPP)
     DT bindings and update its whitelist of supported systems (Viresh
     Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley
     Xiao).

   - Add support for Ux500 to the cpufreq-dt driver and drop the
     obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann).

   - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem
     Nguyen).

   - Fix and clean up assorted issues in the cpufreq drivers and core
     (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva,
     Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla).

   - Update the IO-wait boost handling in the schedutil governor to make
     it less aggressive (Joel Fernandes).

   - Rework system suspend diagnostics to make it print fewer messages
     to the kernel log by default, add a sysfs knob to allow more
     suspend-related messages to be printed and add Low Power S0 Idle
     constraints checks to the ACPI suspend-to-idle code (Rafael
     Wysocki, Srinivas Pandruvada).

   - Prefer suspend-to-idle over S3 on ACPI-based systems with the
     ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM
     interface present in the ACPI tables (Rafael Wysocki).

   - Update documentation related to system sleep and rename a number of
     items in the code to make it cleare that they are related to
     suspend-to-idle (Rafael Wysocki).

   - Export a variable allowing device drivers to check the target
     system sleep state from the core system suspend code (Florian
     Fainelli).

   - Clean up the cpuidle subsystem to handle the polling state on x86
     in a more straightforward way and to use %pOF instead of full_name
     (Rafael Wysocki, Rob Herring).

   - Update the devfreq framework to fix and clean up a few minor issues
     (Chanwoo Choi, Rob Herring).

   - Extend diagnostics in the generic power domains (genpd) framework
     and clean it up slightly (Thara Gopinath, Rob Herring).

   - Fix and clean up a couple of issues in the operating performance
     points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz).

   - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling
     (AVS) driver (David Wu).

   - Fix the usage of notifiers in CPU power management on some
     platforms (Alex Shi).

   - Update the pm-graph system suspend/hibernation and boot profiling
     utility (Todd Brandt).

   - Make it possible to run the cpupower utility without CPU0 (Prarit
     Bhargava)"

* tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits)
  cpuidle: Make drivers initialize polling state
  cpuidle: Move polling state initialization code to separate file
  cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  PM: docs: Delete the obsolete states.txt document
  PM: docs: Describe high-level PM strategies and sleep states
  PM / devfreq: Fix memory leak when fail to register device
  PM / devfreq: Add dependency on PM_OPP
  PM / devfreq: Move private devfreq_update_stats() into devfreq
  PM / devfreq: Convert to using %pOF instead of full_name
  PM / AVS: rockchip-io: add io selectors and supplies for RV1108
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpuidle: Convert to using %pOF instead of full_name
  cpufreq: Convert to using %pOF instead of full_name
  PM / Domains: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  ...
2017-09-05 12:19:08 -07:00
Linus Torvalds
70b8e9eb3b This is the bulk of the GPIO changes for the v4.14 cycle:
Core changes
 - Allow the GPIO irqchip to allocate IRQs dynamically. This is
   an important change on systems where only a restricted number
   of IRQs, lesser than the number of GPIO lines, can be utilized.
   Now we can allocate these on a first-come-first-served basis
   instead of hogging up valuable IRQ lines.
 - Serious fix-up of the kerneldoc documentation and inclusion
   into the kerneldoc builds.
 - Pulled in the IRQ simulator from the IRQ core tree and use
   this in the GPIO mockup driver for exhaustive testing of
   interrupt abilities.
 
 New drivers
 - New driver for ThunderX and OCTEON-TX. This is especially
   interesting as it picks up improvements from the IRQ core that
   allow us to handle fasteoi ACKs upwards in a hierarchy when
   there are IRQ flag latches on several levels in a hierarchy.
   Very interesting work here.
 - New subdriver for Renesas R-Car r8a7745 (RZ/G1E).
 
 Misc
 - Several fixes and improvements for Xilinx Zynq GPIO.
 - Support an enablement GPIO for the 74x164 GPIO.
 - Switch a bunch of chips to use devres to allocate irq
   descriptors.
 - A bunch of constification fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZrmRvAAoJEEEQszewGV1zFd8P/0wwsPFfCY5tjqMwYcu2VIzA
 ZEPlN/Z14Xr/JC7X5N18qWaZSdqAP94do8fn1Utqr6mEOY71BAAmt1dRH3M651nz
 dyAnb5s8IlnFNrv2C3ksG4ArQP72y3uag7b/9fcDPSFBjQKHXP9zI5qhvxJI8XFY
 iesWkwkQayDzbKvm/bFWugclYjSNZCwtzGn2OD0zhh8vKchQBEdLYuiV06iEuvh4
 dkfpH5UhingJ0gMgMj3VLXvnaSPOQy321mnnF8cmHIwelZR8ij3JPQzirKB/cvTe
 fj/INc9/gXFOepFcEaQcWwspeXOXCjOajqfCyeLKLigj44E7pbv4HeTLJmQtCWv/
 fBlHnzjEJG7zZi8JOuKeMwMSc/6GPHBhlmZ4GjpMtIeNXQ8V2oosLbvSd5/whtPg
 u9QuDDeTJwjm1HY3kBNa50BKYrAAKIATHxnYAlGrDTf/9ea5Ld7AT/IfeGHS2AQR
 nV6I0byRYCxEVZUTPeYOMoHDNGgVgA9VPAhUUjLj6r6Kx2bS4Pn7KNvSNx24SQTU
 wP+rWDXRNJzIMr9+sWj3yAksYZPQSpV2+y/VizeHZA7ssv3ZzqKzfWPARhQy/ypF
 GN72LObdxaW01GjN9bJ8x4KxBj+tIo2lLXYIK5TdKZy+LRxnsbCK6JGa5gFxopQh
 325SOqkLlhaS2P6A2nHC
 =TYNw
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of the GPIO changes for the v4.14 cycle.

  Not so much changes this time, phew. David Daney and Bartosz
  Golaszewski did all the really interesting work in infrastructure
  improvement across GPIO and IRQ core, hats off for them and to tglx
  and Marc Z for general help with these patch sets.

  Core changes:

   - Allow the GPIO irqchip to allocate IRQs dynamically. This is an
     important change on systems where only a restricted number of IRQs,
     lesser than the number of GPIO lines, can be utilized. Now we can
     allocate these on a first-come-first-served basis instead of
     hogging up valuable IRQ lines.

   - Serious fix-up of the kerneldoc documentation and inclusion into
     the kerneldoc builds.

   - Pulled in the IRQ simulator from the IRQ core tree and use this in
     the GPIO mockup driver for exhaustive testing of interrupt
     abilities.

  New drivers:

   - New driver for ThunderX and OCTEON-TX. This is especially
     interesting as it picks up improvements from the IRQ core that
     allow us to handle fasteoi ACKs upwards in a hierarchy when there
     are IRQ flag latches on several levels in a hierarchy. Very
     interesting work here.

   - New subdriver for Renesas R-Car r8a7745 (RZ/G1E).

  Misc:

   - Several fixes and improvements for Xilinx Zynq GPIO.

   - Support an enablement GPIO for the 74x164 GPIO.

   - Switch a bunch of chips to use devres to allocate irq descriptors.

   - A bunch of constification fixes"

* tag 'gpio-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (63 commits)
  gpio: mockup: remove unused variable gc
  gpio: pl061: constify amba_id
  Revert "gpiolib: request the gpio before querying its direction"
  gpio: twl6040: remove unneeded forward declaration
  gpio: zevio: make gpio_chip const
  gpio: add gpio_add_lookup_tables() to add several tables at once
  gpio: rcar: Add r8a7745 (RZ/G1E) support
  gpio: brcmstb: check return value of gpiochip_irqchip_add()
  MAINTAINERS: Add entry for THUNDERX GPIO Driver.
  gpio: Add gpio driver support for ThunderX and OCTEON-TX
  gpio: mockup: use irq_sim
  gpio: mxs: use devres for irq generic chip
  gpio: mxc: use devres for irq generic chip
  gpio: pch: use devres for irq generic chip
  gpio: ml-ioh: use devres for irq generic chip
  gpio: sta2x11: use devres for irq generic chip
  gpio: sta2x11: disallow unbinding the driver
  gpio: mxs: disallow unbinding the driver
  gpio: mxc: disallow unbinding the driver
  gpio: aspeed: Remove reference to clock name in debounce warning message
  ...
2017-09-05 11:49:48 -07:00
Linus Torvalds
d16605c912 This is the big bulk of pin control changes for the v4.14 kernel:
Core changes:
 - Decision to wrap the sleep mode of the Spreadtrum and in the future
   others into a specially tagged state. The generic DT bindings and the
   new Spreadtrum driver conforms to this. Others should be moved over
   if possible.
 
 New drivers:
 - New driver for Spreadtrum SoCs especially the SC9860 SoC.
 - New driver for Storlink/Cortina Gemini 3512 and 3516 SoCs.
 
 New subdrivers:
 - Intel Denverton subdriver.
 - Intel Cannon Lake subdriver.
 - Intel Lewisburg subdriver.
 - Allwinner sunxi: R40 subdriver for A10.
 - Socionext uniphier PXs3 subdriver.
 - Rockchip RK3128 subdriver.
 - Renesas SH-PFC R8A77995 subdriver.
 
 Miscellaneous:
 - Qualcomm APQ8064 can handle general purpose clock muxing.
 - Mediatek MT7623 PCIe mux data fixed up.
 - Intel GPIO IRQs are disabled during suspend.
 - Several fixes and addtions to Renesas r8a7796.
 - Qualcomm SPMI GPIO supports dtest route and LV/MV subtype.
 - Input schmitt trigger support in Rockchip RV1108.
 - Aspeed G4 and G5 USB host/device pin control control added.
 - Qualcomm IPQ4019 has matured with a few missing pin groups and
   control bits put in place.
 - Lots of constification, this is the latest in cocinelle fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZra4bAAoJEEEQszewGV1zB0QP/jdNE76rAfPA3FTf3xnWeOhe
 yVPGDC57M5vBkbHp2htgjpnzeaqYRPrLlmJK30pmyYWS/OivFtYcPuxthHX/m8dT
 0WzV9iJ6OntxAFSpzLmWtDc7Svrf30tyPTyMNmCd+0d/Dj8kIRYIsrvCAv0iGwlY
 UWeVxeBwKWKhxV4DbIuEXGEa9zcdsew++qkZjr+GvObtNLIqpQVyLZrKl18C0EAR
 CLSiRNzvlPrr/k2nETkJtYnlaMLl2aL0IAt7JzDtYDonFogQg7oSESehToSZmw99
 Cxo1FHCF4nyMpFBCdnirN2g07dNVLoTcXvKLSygaDorzwrE3uAaVqbWigBC2Rum6
 psvP3SHPudj+ysSzRjkoImuSTdyaQLFHVtGOcb+esM753y90fJ1Mycdf2UNbo2+Z
 NE8wt31iJIZ+/WTxIX692VOUdRivb8/MFsBBwyvGL/Fx3ylsvr34zaOeVlk3e0tO
 7JV3hRaWs+KgwYvesNSxwWPUF+tFHHakqs7OQnROlOIQBakZX3QYVYfc4jfJofUl
 2s0roBOjjKamnta9VphS6OO5EG7lmG41cI5q4uW3bIXdfP88kDATFqXvTkS4HZAw
 UO/LfP31m/1hr5oMYWDUEntzdQP+SE6N2/np6QOGykXNDGut2TxaV4WYkidCYawl
 /8/O1tCUr9xreTsRxWIv
 =GkNo
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.14 kernel.
  There are just a few bigger changes (new drivers mostly) and then a
  lot of small patches all over the place.

  Core changes:
   - Decision to wrap the sleep mode of the Spreadtrum and in the future
     others into a specially tagged state. The generic DT bindings and
     the new Spreadtrum driver conforms to this. Others should be moved
     over if possible.

  New drivers:
   - Spreadtrum SoCs especially the SC9860 SoC.
   - Storlink/Cortina Gemini 3512 and 3516 SoCs.

  New subdrivers:
   - Intel Denverton subdriver.
   - Intel Cannon Lake subdriver.
   - Intel Lewisburg subdriver.
   - Allwinner sunxi: R40 subdriver for A10.
   - Socionext uniphier PXs3 subdriver.
   - Rockchip RK3128 subdriver.
   - Renesas SH-PFC R8A77995 subdriver.

  Miscellaneous:
   - Qualcomm APQ8064 can handle general purpose clock muxing.
   - Mediatek MT7623 PCIe mux data fixed up.
   - Intel GPIO IRQs are disabled during suspend.
   - Several fixes and addtions to Renesas r8a7796.
   - Qualcomm SPMI GPIO supports dtest route and LV/MV subtype.
   - Input schmitt trigger support in Rockchip RV1108.
   - Aspeed G4 and G5 USB host/device pin control control added.
   - Qualcomm IPQ4019 has matured with a few missing pin groups and
     control bits put in place.
   - Lots of constification, this is the latest in cocinelle fixes"

* tag 'pinctrl-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (147 commits)
  Revert "pinctrl: sunxi: Don't enforce bias disable (for now)"
  pinctrl: uniphier: fix members of rmii group for Pro4
  pinctrl: Delete an error message
  pinctrl: core: Delete an error message
  pinctrl: intel: Read back TX buffer state
  pinctrl: rockchip: Add rv1108 recalculated iomux support
  pinctrl: intel: Decrease indentation in intel_gpio_set()
  pinctrl: rza1: Remove suffix from gpiochip label
  pinctrl: qcom: spmi-gpio: Correct power_source range check
  pinctrl: freescale: make mxs_regs const
  pinctrl: aspeed: Rework strap register write logic for the AST2500
  pinctrl: rza1: off by one in rza1_parse_gpiochip()
  pinctrl: qcom: General Purpose clocks for apq8064
  pinctrl: sprd: Add Spreadtrum pin control driver
  dt-bindings: pinctrl: Add DT bindings for Spreadtrum SC9860
  pinctrl: Add sleep related state to indicate sleep related configs
  pinctrl: mediatek: update PCIe mux data for MT7623
  pinctrl: intel: Add Intel Lewisburg GPIO support
  pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller support
  pinctrl: aspeed: Fix ast2500 strap register write logic
  ...
2017-09-05 11:45:33 -07:00
Linus Torvalds
fe9e31383e regulator: Updates for v4.14
This is an extremely quiet release for the regulator subsystem, it's all
 fairly minor fixes and cleanups plus a few new drivers and ddevice ID
 additions:
 
  - Support for MediaTek MT6380, Ricoh RC5T619 and ST Voltage Reference
    Buffers.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmthW0THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0BhAB/4/twIBnHSwqyNgt/HX8N0gdalejYIY
 lrCushBDAEp3CAV/ODfjCQlL2V2DOA5scx9iQxiiri6owbGcpdB7mNDMfyR9tT2f
 hkUPEMK6gyCHQdKubmnpFXKBrmPXo6wYrPGYx8HWHYCSiL3lTQPwd+n1iKt4NsLT
 mQRzjXqFahKS/UKqPcur+wP1gpVGY5DUifDjSiNTQzenM4EY/Yu0DzTohAta5qb7
 8bR+teC90I2u7VBQUnslNdVm1y8CtSyUVAOP2aOkTVu/8h/r9DDL1EL6w3efScna
 60FZGcsnqVuEjUsF/5PtKes/9QD+/MS1qTKBK5eo+UzcbqQfhpZgBo4d
 =EUUb
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This is an extremely quiet release for the regulator subsystem, it's
  all fairly minor fixes and cleanups plus a few new drivers and ddevice
  ID additions:

   - Support for MediaTek MT6380, Ricoh RC5T619 and ST Voltage Reference
     Buffers"

* tag 'regulator-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
  regulator: Add support for stm32-vrefbuf
  regulator: Add STM32 Voltage Reference Buffer
  regulator: pv88090: Exception handling for out of bounds
  regulator: da9063: Return an error code on probe failure
  regulator: rn5t618: add RC5T619 PMIC support
  regulator: ltc3589: constify i2c_device_id
  regulator: fan53555: fix I2C device ids
  regulator: add fixes with MT6397 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6323 dt-bindings shouldn't reference driver
  regulator: add fixes with MT6311 dt-bindings shouldn't reference driver
  regulator: Add document for MediaTek MT6380 regulator
  regulator: mt6380: Add support for MT6380
  regulator: pwm-regulator: Remove unneeded gpiod NULL check
  regulator: core: fix a possible race in disable_work handling
  regulator: fan53555: Use of_device_get_match_data() to simplify probe
  regulator: of: regulator_of_get_init_data() missing of_node_get()
  regulator: pwm-regulator: fix example syntax
  regulator: Convert to using %pOF instead of full_name
  regulator: cpcap: Add OF mode mapping
  regulator: cpcap: Fix standby mode
  ...
2017-09-05 11:43:30 -07:00
Linus Torvalds
b88f55774f spi: Updates for v4.14
A fairly quiet release for the SPI subsystem:
 
  - Move to using IDR for allocating bus numbers.
  - Modernisation of the ep93xx driver, removing a lot of open coding and
    using the framework more.
  - The tools have been moved to use the standard tools build system and
    an install target added (there will be a fairly trivial conflict
    with tip resulting from the changes in the main tools Makefile).
  - A refactoring of the Qualcomm QUP driver which enables new variants
    to be supported.
  - Explicit support for the Freescale i.MX53 and i.MX6 SPI, Renesas
    R-Car H3 and Rockchip RV1108 controllers.
 
 There's also a trivial add/add conflict in spi.c with the ACPI tree
 adding a header for some Apple support and the IDR code needing a header
 too.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmtgGYTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0IwAB/9U/s75RgZN+w/IZneex3gD2+mnNxTV
 SiWWlR66580vbXsh7lgzTtANrDKfYTsYGP3JS7vjhsegBlzcT4M5OMyJZTcCi40a
 JF0edDFnkqNM96LubJVnrIJj4KHL1Zx+FICIXItOSBZh6ECgI92KAfAbfQhLdB10
 BtNdlsQMzcTygLqf2/N6W7u/6yYBnUuaaNeu+j4QsF1pE9L/5kt3lLXxv2DTL3cA
 vncqu/ndxIjCKLpIGjMOrvAlLCKmZdIxX3Y/d1XJSxyG3vJj30kEvxATZ15sKln8
 gXOnmWF2JgBcxEHxzsTGuVZpXXblu7uiicniglP0geC9dMboJnky993j
 =tbQ9
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A fairly quiet release for the SPI subsystem:

   - Move to using IDR for allocating bus numbers

   - Modernisation of the ep93xx driver, removing a lot of open coding
     and using the framework more

   - The tools have been moved to use the standard tools build system
     and an install target added (there will be a fairly trivial
     conflict with tip resulting from the changes in the main tools
     Makefile)

   - A refactoring of the Qualcomm QUP driver which enables new variants
     to be supported

   - Explicit support for the Freescale i.MX53 and i.MX6 SPI, Renesas
     R-Car H3 and Rockchip RV1108 controllers"

* tag 'spi-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (71 commits)
  spi: spi-falcon: drop check of boot select
  spi: imx: fix use of native chip-selects with devicetree
  spi: pl022: constify amba_id
  spi: imx: fix little-endian build
  spi: omap: Allocate bus number from spi framework
  spi: Kernel coding style fixes
  spi: imx: dynamic burst length adjust for PIO mode
  spi: Pick spi bus number from Linux idr or spi alias
  spi: rockchip: configure CTRLR1 according to size and data frame
  spi: altera: Consolidate TX/RX data register access
  spi: altera: Switch to SPI core transfer queue management
  spi: rockchip: add compatible string for rv1108 spi
  spi: qup: fix 64-bit build warning
  spi: qup: hide warning for uninitialized variable
  spi: spi-ep93xx: use the default master transfer queueing mechanism
  spi: spi-ep93xx: remove private data 'current_msg'
  spi: spi-ep93xx: pass the spi_master pointer around
  spi: spi-ep93xx: absorb the interrupt enable/disable helpers
  spi: spi-ep93xx: add spi master prepare_transfer_hardware()
  spi: spi-ep93xx: use 32-bit read/write for all registers
  ...
2017-09-05 11:40:38 -07:00
Linus Torvalds
bafb0762cb Char/Misc drivers for 4.14-rc1
Here is the big char/misc driver update for 4.14-rc1.
 
 Lots of different stuff in here, it's been an active development cycle
 for some reason.  Highlights are:
   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.
   - coresight updates and fixes
   - mux driver file renames to be a bit "nicer"
   - intel_th driver updates
   - normal set of hyper-v updates and changes
   - small fpga subsystem and driver updates
   - lots of const code changes all over the driver trees
   - extcon driver updates
   - fmc driver subsystem upadates
   - w1 subsystem minor reworks and new features and drivers added
   - spmi driver updates
 
 Plus a smattering of other minor driver updates and fixes.
 
 All of these have been in linux-next with no reported issues for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1+Ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yl26wCgquufNylfhxr65NbJrovduJYzRnUAniCivXg8
 bePIh/JI5WxWoHK+wEbY
 =hYWx
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.14-rc1.

  Lots of different stuff in here, it's been an active development cycle
  for some reason. Highlights are:

   - updated binder driver, this brings binder up to date with what
     shipped in the Android O release, plus some more changes that
     happened since then that are in the Android development trees.

   - coresight updates and fixes

   - mux driver file renames to be a bit "nicer"

   - intel_th driver updates

   - normal set of hyper-v updates and changes

   - small fpga subsystem and driver updates

   - lots of const code changes all over the driver trees

   - extcon driver updates

   - fmc driver subsystem upadates

   - w1 subsystem minor reworks and new features and drivers added

   - spmi driver updates

  Plus a smattering of other minor driver updates and fixes.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'char-misc-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (244 commits)
  ANDROID: binder: don't queue async transactions to thread.
  ANDROID: binder: don't enqueue death notifications to thread todo.
  ANDROID: binder: Don't BUG_ON(!spin_is_locked()).
  ANDROID: binder: Add BINDER_GET_NODE_DEBUG_INFO ioctl
  ANDROID: binder: push new transactions to waiting threads.
  ANDROID: binder: remove proc waitqueue
  android: binder: Add page usage in binder stats
  android: binder: fixup crash introduced by moving buffer hdr
  drivers: w1: add hwmon temp support for w1_therm
  drivers: w1: refactor w1_slave_show to make the temp reading functionality separate
  drivers: w1: add hwmon support structures
  eeprom: idt_89hpesx: Support both ACPI and OF probing
  mcb: Fix an error handling path in 'chameleon_parse_cells()'
  MCB: add support for SC31 to mcb-lpc
  mux: make device_type const
  char: virtio: constify attribute_group structures.
  Documentation/ABI: document the nvmem sysfs files
  lkdtm: fix spelling mistake: "incremeted" -> "incremented"
  perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file
  nvmem: include linux/err.h from header
  ...
2017-09-05 11:08:17 -07:00
Linus Torvalds
bf1d6b2c76 Staging/IIO driver updates for 4.14-rc1
Here is the big staging and IIO driver update for 4.14-rc1.
 
 Lots of staging driver fixes and cleanups, including some reorginizing
 of the lustre header files to try to impose some sanity on what is, and
 what is not, the uapi for that filesystem.
 
 There are some tty core changes in here as well, as the speakup drivers
 need them, and that's ok with me, they are sane and the speakup code is
 getting nicer because of it.
 
 There is also the addition of the obiligatory new wifi driver, just
 because it has been a release or two since we added our last one...
 
 Other than that, lots and lots of small coding style fixes, as usual.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2AbA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymboACfUsNhw+cJlVb25J70NULkye3y1PAAoJ+Ayq30
 ckkLGakZayKcYEx50ffH
 =KJwg
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.14-rc1.

  Lots of staging driver fixes and cleanups, including some reorginizing
  of the lustre header files to try to impose some sanity on what is,
  and what is not, the uapi for that filesystem.

  There are some tty core changes in here as well, as the speakup
  drivers need them, and that's ok with me, they are sane and the
  speakup code is getting nicer because of it.

  There is also the addition of the obiligatory new wifi driver, just
  because it has been a release or two since we added our last one...

  Other than that, lots and lots of small coding style fixes, as usual.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits)
  staging:rtl8188eu:core Fix remove unneccessary else block
  staging: typec: fusb302: make structure fusb302_psy_desc static
  staging: unisys: visorbus: make two functions static
  staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks
  staging: r8822be: Simplify deinit_priv()
  staging: r8822be: Remove some dead code
  staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability
  staging:rtl8188eu Fix comparison to NULL
  staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd
  Staging: Pi433: style fix - tabs and spaces
  staging: pi433: fix spelling mistake: "preample" -> "preamble"
  staging:rtl8188eu:core Fix Code Indent
  staging: typec: fusb302: Export current-limit through a power_supply class dev
  staging: typec: fusb302: Add support for USB2 charger detection through extcon
  staging: typec: fusb302: Use client->irq as irq if set
  staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  staging: typec: fusb302: Set max supply voltage to 5V
  staging: typec: tcpm: Add get_current_limit tcpc_dev callback
  staging:rtl8188eu Use __func__ instead of function name
  staging: lustre: coding style fixes found by checkpatch.pl
  ...
2017-09-05 10:36:26 -07:00
Linus Torvalds
e63a94f12b TTY/Serial updates for 4.14-rc1
Here is the big tty/serial driver update for 4.14-rc1.
 
 Well, not all that big, just a number of small serial driver fixes, and
 a new serial driver.  Also in here are some much needed goldfish tty
 driver (emulator) fixes to try to get that codebase under control.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2A+A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylNKACfWOuWb4PEGzPg2hF57V1g0cq8VXEAn0BtZT+n
 uuCBV53ylesoHhEhKf/D
 =g+za
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver update for 4.14-rc1.

  Well, not all that big, just a number of small serial driver fixes,
  and a new serial driver. Also in here are some much needed goldfish
  tty driver (emulator) fixes to try to get that codebase under control.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (94 commits)
  tty: goldfish: Implement support for kernel 'earlycon' parameter
  tty: goldfish: Use streaming DMA for r/w operations on Ranchu platforms
  tty: goldfish: Refactor constants to better reflect their nature
  serial: 8250_port: Remove useless NULL checks
  earlycon: initialise baud field of earlycon device structure
  tty: hvcs: make ktermios const
  pty: show associative slave of ptmx in fdinfo
  tty: n_gsm: Add compat_ioctl
  tty: hvcs: constify vio_device_id
  tty: hvc_vio: constify vio_device_id
  tty: mips_ejtag_fdc: constify mips_cdmm_device_id
  Introduce 8250_men_mcb
  mcb: introduce mcb_get_resource()
  serial: imx: Avoid post-PIO cleanup if TX DMA is started
  tty: serial: imx: disable irq after suspend
  serial: 8250_uniphier: add suspend/resume support
  serial: 8250_uniphier: use CHAR register for canary to detect power-off
  serial: 8250_uniphier: fix serial port index in private data
  serial: 8250: of: Add new port type for MediaTek BTIF controller on MT7622/23 SoC
  dt-bindings: serial: 8250: Add MediaTek BTIF controller bindings
  ...
2017-09-05 10:30:48 -07:00
Linus Torvalds
1a3b85ea36 USB/PHY driver updates for 4.14-rc1
Here is the large USB and PHY driver update for 4.14-rc1.
 
 Not all that exciting, a few new PHY drivers, the usual mess of gadget
 driver updates and fixes, and of course, xhci updates to try to tame
 that beast.
 
 A number of usb-serial updates and other small fixes all over the USB
 driver tree are in here as well.  Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2Buw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk0VQCeK9SbD3sNVE0NXnwBYPTptghtr1EAoKwg96LG
 e4TUNAUcKadcDHJ8S81i
 =zy8S
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY driver updates from Greg KH:
 "Here is the large USB and PHY driver update for 4.14-rc1.

  Not all that exciting, a few new PHY drivers, the usual mess of gadget
  driver updates and fixes, and of course, xhci updates to try to tame
  that beast.

  A number of usb-serial updates and other small fixes all over the USB
  driver tree are in here as well. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (171 commits)
  usbip: vhci-hcd: make vhci_hc_driver const
  usb: phy: Avoid unchecked dereference warning
  usb: imx21-hcd: make imx21_hc_driver const
  usb: host: make ehci_fsl_overrides const and __initconst
  dt-bindings: mt8173-mtu3: add generic compatible and rename file
  dt-bindings: mt8173-xhci: add generic compatible and rename file
  usb: xhci-mtk: add generic compatible string
  usbip: auto retry for concurrent attach
  USB: serial: option: simplify 3 D-Link device entries
  USB: serial: option: add support for D-Link DWM-157 C1
  usb: core: usbport: fix "BUG: key not in .data" when lockdep is enabled
  usb: chipidea: usb2: check memory allocation failure
  usb: Add device quirk for Logitech HD Pro Webcam C920-C
  usb: misc: lvstest: add entry to place port in compliance mode
  usb: xhci: Support enabling of compliance mode for xhci 1.1
  usb:xhci:Fix regression when ATI chipsets detected
  usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
  usb: gadget: make snd_pcm_hardware const
  usb: common: use of_property_read_bool()
  USB: core: constify vm_operations_struct
  ...
2017-09-05 10:26:01 -07:00
Linus Torvalds
04759194dc arm64 updates for 4.14:
- VMAP_STACK support, allowing the kernel stacks to be allocated in
   the vmalloc space with a guard page for trapping stack overflows. One
   of the patches introduces THREAD_ALIGN and changes the generic
   alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
   functional change for other architectures)
 
 - Contiguous PTE hugetlb support re-enabled (after being reverted a
   couple of times). We now have the semantics agreed in the generic mm
   layer together with API improvements so that the architecture code can
   detect between contiguous and non-contiguous huge PTEs
 
 - Initial support for persistent memory on ARM: DC CVAP instruction
   exposed to user space (HWCAP) and the in-kernel pmem API implemented
 
 - raid6 improvements for arm64: faster algorithm for the delta syndrome
   and implementation of the recovery routines using Neon
 
 - FP/SIMD refactoring and removal of support for Neon in interrupt
   context. This is in preparation for full SVE support
 
 - PTE accessors converted from inline asm to cmpxchg so that we can
   use LSE atomics if available (ARMv8.1)
 
 - Perf support for Cortex-A35 and A73
 
 - Non-urgent fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAlmuunYACgkQa9axLQDI
 XvEH9BAAo8V94GOMkX6HkT+2hjkl7DQ9krjumzmfzLV5AdgHMMzBNozmWKOCzgh0
 yaxRcTUju3EyNeKhADr7yLiKDH8fnRPmYEJiVrwfgo7MaPApaCorr7LLIXfPGuxe
 DTBHw+oxRMjlmaHeATX4PBWfQxAx+vjjhHqv3Qpmvdm4nYqR+0hZomH2BNsu64fk
 AkSeUCxfCEyzSFIKuQM04M4zhSSZHz1tDxWI0b0RcK73qqEOuYZNkn6qxSKP5J4X
 b2Y2U8nmxJ5C2fXpDYZaK9shiJ4Vu7X3Ocf/M7hsJzGY5z4dhnmUmxpHROaNiSvo
 hCx7POYKyAPovps7zMSqcdsujkqOIQO8RHp4zGXx/pIr1RumjIiCY+RGpUYGibvU
 N4Px5hZNneuHaPZZ+sWjOOdNB28xyzeUp2UK9Bb6uHB+/3xssMAD8Fd/b2ZLnS6a
 YW3wrZmqA+ckfETsSRibabTs/ayqYHs2SDVwnlDJGtn+4Pw8oQpwGrwokxLQuuw3
 uF2sNEPhJz+dcy21q3udYAQE1qOJBlLqTptgP96CHoVqh8X6nYSi5obT7y30ln3n
 dhpZGOdi6R8YOouxgXS3Wg07pxn444L/VzDw5ku/5DkdryPOZCSRbk/2t8If6oDM
 2VD6PCbTx3hsGc7SZ7FdSwIysD2j446u40OMGdH2iLB5jWBwyOM=
 =vd0/
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - VMAP_STACK support, allowing the kernel stacks to be allocated in the
   vmalloc space with a guard page for trapping stack overflows. One of
   the patches introduces THREAD_ALIGN and changes the generic
   alloc_thread_stack_node() to use this instead of THREAD_SIZE (no
   functional change for other architectures)

 - Contiguous PTE hugetlb support re-enabled (after being reverted a
   couple of times). We now have the semantics agreed in the generic mm
   layer together with API improvements so that the architecture code
   can detect between contiguous and non-contiguous huge PTEs

 - Initial support for persistent memory on ARM: DC CVAP instruction
   exposed to user space (HWCAP) and the in-kernel pmem API implemented

 - raid6 improvements for arm64: faster algorithm for the delta syndrome
   and implementation of the recovery routines using Neon

 - FP/SIMD refactoring and removal of support for Neon in interrupt
   context. This is in preparation for full SVE support

 - PTE accessors converted from inline asm to cmpxchg so that we can use
   LSE atomics if available (ARMv8.1)

 - Perf support for Cortex-A35 and A73

 - Non-urgent fixes and cleanups

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: cleanup {COMPAT_,}SET_PERSONALITY() macro
  arm64: introduce separated bits for mm_context_t flags
  arm64: hugetlb: Cleanup setup_hugepagesz
  arm64: Re-enable support for contiguous hugepages
  arm64: hugetlb: Override set_huge_swap_pte_at() to support contiguous hugepages
  arm64: hugetlb: Override huge_pte_clear() to support contiguous hugepages
  arm64: hugetlb: Handle swap entries in huge_pte_offset() for contiguous hugepages
  arm64: hugetlb: Add break-before-make logic for contiguous entries
  arm64: hugetlb: Spring clean huge pte accessors
  arm64: hugetlb: Introduce pte_pgprot helper
  arm64: hugetlb: set_huge_pte_at Add WARN_ON on !pte_present
  arm64: kexec: have own crash_smp_send_stop() for crash dump for nonpanic cores
  arm64: dma-mapping: Mark atomic_pool as __ro_after_init
  arm64: dma-mapping: Do not pass data to gen_pool_set_algo()
  arm64: Remove the !CONFIG_ARM64_HW_AFDBM alternative code paths
  arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()
  arm64: Move PTE_RDONLY bit handling out of set_pte_at()
  kvm: arm64: Convert kvm_set_s2pte_readonly() from inline asm to cmpxchg()
  arm64: Convert pte handling from inline asm to using (cmp)xchg
  arm64: neon/efi: Make EFI fpsimd save/restore variables static
  ...
2017-09-05 09:53:37 -07:00
Linus Torvalds
9e85ae6af6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The first part of the s390 updates for 4.14:

   - Add machine type 0x3906 for IBM z14

   - Add IBM z14 TLB flushing improvements for KVM guests

   - Exploit the TOD clock epoch extension to provide a continuous TOD
     clock afer 2042/09/17

   - Add NIAI spinlock hints for IBM z14

   - Rework the vmcp driver and use CMA for the respone buffer of z/VM
     CP commands

   - Drop some s390 specific asm headers and use the generic version

   - Add block discard for DASD-FBA devices under z/VM

   - Add average request times to DASD statistics

   - A few of those constify patches which seem to be in vogue right now

   - Cleanup and bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (50 commits)
  s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs
  s390/dasd: Add discard support for FBA devices
  s390/zcrypt: make CPRBX const
  s390/uaccess: avoid mvcos jump label
  s390/mm: use generic mm_hooks
  s390/facilities: fix typo
  s390/vmcp: simplify vmcp_response_free()
  s390/topology: Remove the unused parent_node() macro
  s390/dasd: Change unsigned long long to unsigned long
  s390/smp: convert cpuhp_setup_state() return code to zero on success
  s390: fix 'novx' early parameter handling
  s390/dasd: add average request times to dasd statistics
  s390/scm: use common completion path
  s390/pci: log changes to uid checking
  s390/vmcp: simplify vmcp_ioctl()
  s390/vmcp: return -ENOTTY for unknown ioctl commands
  s390/vmcp: split vmcp header file and move to uapi
  s390/vmcp: make use of contiguous memory allocator
  s390/cpcmd,vmcp: avoid GFP_DMA allocations
  s390/vmcp: fix uaccess check and avoid undefined behavior
  ...
2017-09-05 09:45:46 -07:00
Linus Torvalds
f32c9e059e Merge branch 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
 "Major changes include:

   - Full support of the firmware Page Deallocation Table with
     MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
     regularily for new bad memory pages.

   - Full support for self-extracting kernel.

   - Added UBSAN support.

   - Lots of section mismatch fixes across all parisc drivers.

   - Added examples for %pF and %pS usage in printk-formats.txt"

* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
  printk-formats.txt: Add examples for %pF and %pS usage
  parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
  parisc/core: Fix section mismatches
  parisc/ipmi_si_intf: Fix section mismatches on parisc platform
  parisc/input/hilkbd: Fix section mismatches
  parisc/net/lasi_82596: Fix section mismatches
  parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
  parisc: Fix section mismatches in parisc core drivers
  parisc/parport_gsc: Fix section mismatches
  parisc/scsi/lasi700: Fix section mismatches
  parisc/scsi/zalon: Fix section mismatches
  parisc/8250_gsc: Fix section mismatches
  parisc/mux: Fix section mismatches
  parisc/sticore: Fix section mismatches
  parisc/harmony: Fix section mismatches
  parisc: Wire up support for self-extracting kernel
  parisc: Make existing core files reuseable for bootloader
  parisc: Add core code for self-extracting kernel
  parisc: Enable UBSAN support
  parisc/random: Add machine specific randomness
  ...
2017-09-05 09:37:11 -07:00
Christoffer Dall
9b87e7a8bf KVM: arm/arm64: Support uaccess of GICC_APRn
When migrating guests around we need to know the active priorities to
ensure functional virtual interrupt prioritization by the GIC.

This commit clarifies the API and how active priorities of interrupts in
different groups are represented, and implements the accessor functions
for the uaccess register range.

We live with a slight layering violation in accessing GICv3 data
structures from vgic-mmio-v2.c, because anything else just adds too much
complexity for us to deal with (it's not like there's a benefit
elsewhere in the code of an intermediate representation as is the case
with the VMCR).  We accept this, because while doing v3 processing from
a file named something-v2.c can look strange at first, this really is
specific to dealing with the user space interface for something that
looks like a GICv2.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-09-05 17:33:39 +02:00
Rob Herring
4da722ca19 dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05 10:03:06 -05:00
Mauro Carvalho Chehab
0865c7429e media: add qcom_camss.rst to v4l-drivers rst file
Avoid this warning:
	/devel/v4l/docs/Documentation/media/v4l-drivers/qcom_camss.rst:: WARNING: document isn't included in any toctree

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 07:28:25 -04:00
Mauro Carvalho Chehab
da68249219 media: dvb uapi: move frontend legacy API to another part of the book
There's a chapter for the legacy APIs. Move the frontend DVBv3
API to it, and update the chapter's introduction accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 07:09:57 -04:00
Mauro Carvalho Chehab
1e13c184dc media: pixfmt-srggb12p.rst: better format the table for PDF output
Adjust the table to be better displayed on PDF output.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:33:16 -04:00
Sakari Ailus
debc313a18 media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
There appears to be an issue in using \small in certain cases on Sphinx
1.4 and 1.5. Other format documents don't use \small either, remove it
from here as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

[mchehab@s-opensource.com: kept tabularcolumns - readjusted - and
 add a few blank lines for it to display better]
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:32:54 -04:00
Mauro Carvalho Chehab
b9261184b8 media: index.rst: don't write "Contents:" on PDF output
Right now, Sphinx unconditionally creates a blank page with
just "Contents:" on it, on PDF output. While this makes sense
for html, it doesn't o PDF, as LaTeX does what's required
automatically.

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:30:41 -04:00
Mauro Carvalho Chehab
679f4d6ea5 media: pixfmt*.rst: replace a two dots by a comma
On several tables, the color sample location table preamble is
written as:
	Color Sample Location..
Instead of:
	Color Sample Location:

I suspect that the repetition of such pattern was due to some
copy-and-paste (or perhaps some error during DocBook conversion).

Anyway, fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:30:26 -04:00
Mauro Carvalho Chehab
9eaafad610 media: vidioc-g-fmt.rst: adjust table format
While doing a visual inspection with Sphinx 1.5, I noticed that
one of the columns was smaller than the text written there.

As this is the only thing I noticed with Sphinx 1.5, I suspect
that this was also a problem with Sphinx 1.4. Yet, I opted to
touch it in a way that wouldn't cause backward issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:30:01 -04:00
Mauro Carvalho Chehab
a28ee884c6 media: vivid.rst: add a blank line to correct ReST format
On all vivid parameters, there's an space after the parameter,
except for "DV Timings Signal Mode". That makes this single one
to be written in bold, and, at PDF output, at the same line as
its description.

Use the same convention as the other parameters, in order to
adjust its output.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:29:46 -04:00
Mauro Carvalho Chehab
f9e628213d media: v4l2 uapi book: get rid of driver programming's chapter
It doesn't make any sense having a driver programming's chapter
at the uAPI book, as this is related to kernel API. Also,
we now have such kAPI book where V4L2 driver programming is covered.

So, get rid of this left-over.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:29:20 -04:00
Mauro Carvalho Chehab
5a93bb931e media: format.rst: use the right markup for important notes
There's an important note there, but it is not using the
ReST markup. So, it doesn't get any visual highlight on
the output.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:29:03 -04:00
Mauro Carvalho Chehab
91dd89bbbb media: docs-rst: cardlists: change their format to flat-tables
Most tables there don't fit on 80 columns. Some are very big.

While those tables are actually generated via scripts, every
time a new board is added, the entire table could be reformatted.
>From the diffstat PoV, that's bad, as it is hard to see what
happened.

One such example is at changeset 4868f6e1fce6 ("media:
em28xx-cardlist.rst: update to reflect last changes"):

The USB ID for "Plextor ConvertX PX-AV100U" was added to card
number 9, with caused the entire table to be reformatted.

So, instead, use flat-tables. While here, fix PDF output,
by adding tablecolumns to the tables that need it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:28:48 -04:00
Mauro Carvalho Chehab
17cb584351 media: em28xx-cardlist.rst: update to reflect last changes
There were some new board additions. Update the cardlist
accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:28:24 -04:00
Mauro Carvalho Chehab
74c9751c83 media: v4l2-event.rst: adjust table to fit on PDF output
The tables there don't quite fit on PDF output.

Adjust it by adding a tabularcolumns macro.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:28:09 -04:00
Mauro Carvalho Chehab
1b41d94bb5 media: docs: don't show ToC for each part on PDF output
The "Table of Contents" of a PDF file is generated only once,
at the beginning fo the output. It doesn't produce it on
each part.

So, don't output this text on each part of the document.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:27:50 -04:00
Mauro Carvalho Chehab
f989420788 media: cec uapi: Adjust table sizes for PDF output
Several tables at this media book chapter have issues
when PDF is produced. Adjust them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:27:28 -04:00
Mauro Carvalho Chehab
1367f4ee6e media: mc uapi: adjust some table sizes for PDF output
Some cells are too small to fit the text written to it.

Increase it. No text changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:27:09 -04:00
Mauro Carvalho Chehab
432e6be476 media: rc-sysfs-nodes.rst: better use literals
A literal box provides a better visual when pdf and html output
is generated for things like the output of a sysfs devnode.
It alsod matches other conventions used within the media book.

So, use it.

While here, use literals for protocol names.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:26:51 -04:00
Mauro Carvalho Chehab
b5dd3eac84 media: docs: fix PDF build with Sphinx 1.4
Commit 70b074df4e ("media: fix pdf build with Spinx 1.6") caused
a regression at Sphinx 1.4 PDF build: although it produces a full
document in batch mode, it returns errors on interactive mode:

	[63]
	Runaway argument?
	{\relax
	! Paragraph ended before \multicolumn was complete.
	<to be read again>
	                   \par
	l.7703 \hline\end{tabulary}

The error seems to be due to some bug at Sphinx PDF output:
when multicolumns is used, it doesn't accept an empty string.

Just removing the :cpan:`1` and replacing by two empty
columns fix the issue.

Fixes: 70b074df4e ("media: fix pdf build with Spinx 1.6")

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:26:37 -04:00
Mauro Carvalho Chehab
b75c1d85c3 media: v4l uAPI docs: adjust some tables for PDF output
On tests with Spinx 1.4, some tables are still writing text
outside cells. Adjust those tables.

PS.: As this was revisited several times, I suspect that this
will only be fully fixed if we add tabularcolumns to all tables
at the V4L2 part of the book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:25:58 -04:00
Mauro Carvalho Chehab
4d6436962a media: vidioc-g-tuner.rst: Fix table number of cols
The Tuner Audio Matrix table is broken: the first row has 7
columns instead of 6, causing it to be parsed wrong and displayed
very badly on PDF output.

Fix it and adjust the table to look nice at PDF output

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:24:59 -04:00
Mauro Carvalho Chehab
d39d708522 media: vidioc-querycap: use a more realistic value for KERNEL_VERSION
In the past, V4L2 versions were 0.x.y, but that changed years
ago. Since Kernel 3.1, however, the numbering schema was changed
to match the Kernel version.

However, the presented example still uses the old numerating
schema, with is a misleading information.

So, update it to the new schema.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:24:45 -04:00
Mauro Carvalho Chehab
1473c75e9a media: v4l uAPI: add descriptions for arguments to all ioctls
Several ioctls are missing descriptions for the third argument
of the ioctl() command. They should have a description, as
otherwise the output won't be ok, and will sound like something
is missing.

So, add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:24:28 -04:00
Mauro Carvalho Chehab
7e6854a9bf media: ca.h: document ca_msg and the corresponding ioctls
Usually, CA messages are sent/received via reading/writing at
the CA device node. However, two drivers (dst_ca and firedtv-ci)
also implement it via ioctls.

Apparently, on both cases, the net result is the same.

Anyway, let's document it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:23:28 -04:00
Mauro Carvalho Chehab
bd9049edc6 media: ca docs: document CA_SET_DESCR ioctl and structs
The av7110 driver uses CA_SET_DESCR to store the descrambler
control words at the CA descrambler slots.

Document it.

Thanks-to: Honza Petrouš <jpetrous@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:23:07 -04:00
Mauro Carvalho Chehab
56d51b65bc media: net.h: add kernel-doc and use it at Documentation/
As we did with frontend.h, ca.h and dmx.h, move the struct
definition to net.h.

That should help to keep it updated, as more stuff gets
added there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:22:42 -04:00
Mauro Carvalho Chehab
7e30c077d4 media: intro.rst: don't assume audio and video codecs to be MPEG2
Originally, when DVB was introduced, all codecs would be part of
MPEG2 standard. That's not true anymore, as there are a large
number of codec standards used on digital TV nowadays.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:20:28 -04:00
Mauro Carvalho Chehab
90b588a9b4 media: dvbstb.svg: use dots for the optional parts of the hardware
The hardware description mentions that some parts are optional.
Make it clearer at the drawing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:20:13 -04:00
Mauro Carvalho Chehab
76df39fa82 media: dmx-get-pes-pids.rst: document the ioctl
This ioctl is supported by the DVB core, but was never
documented.

Add a documentation for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:19:50 -04:00
Mauro Carvalho Chehab
883dfe8ae6 media: dvb uAPI docs: minor editorial changes
Do minor editorial changes to improve documentation readability:

- mark literals as such;
- add table markups to hint sizes;
- define what PES means;
- instead of hardcoding devnode numbers to zero (like adapter0/) use a
  question mark, to indicate that multiple devnodes may exist;
- add cross-references where useful.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:19:32 -04:00
Mauro Carvalho Chehab
8e3195101b media: dvbapi.rst: add an entry to DVB revision history
There are several missing items at the API history. Yet,
as we're doing a significant change there, add a new entry.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:19:04 -04:00
Mauro Carvalho Chehab
536593acc7 media: dvb-frontend-parameters.rst: fix the name of a struct
The struct that contains an union of DVB parameters is
called dvb_frontend_parameters (and not FrontendParameters).

Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:18:47 -04:00
Mauro Carvalho Chehab
02a3c98c6b media: dmx-fread.rst: specify how DMX_CHECK_CRC works
In the past, the documentation used to say that, if a CRC error
was found, a "-ECRC" error would be returned. That's not true:
the DVB core will just silently ignore such errors.

So, add an explicit note about that.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:18:28 -04:00
Mauro Carvalho Chehab
699f19e3f1 media: dvb uAPI docs: Prefer use "Digital TV instead of "DVB"
The usage of the term "DVB" at the dvb API docs is confusing,
as, right now, it can refer to either the European digital TV
standard or to the subsystem.

So, prefer calling it as "Digital TV" on most places, to avoid
ambiguity.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:18:03 -04:00
Mauro Carvalho Chehab
0de6357aca media: ca-fopen.rst: Fixes the device node name for CA
The device node name for CA is wrong since ever. I suspect
that the name there was before DVBv3 (with was the first API
introduced at the Kernel).

Anyway, use the right name there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:17:14 -04:00
Mauro Carvalho Chehab
9a721b9b4b media: dvb uAPI docs: adjust return value ioctl descriptions
There are several issues on the return value for ioctls:

- Text is confusing;
- Some error codes don't exist;
- The non-generic error codes should come before the text
  that points to the generic error codes;
- Tables don't contain column size hints;
- Some references are not marked as such.

Correct them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:16:37 -04:00
Mauro Carvalho Chehab
4e3b0cab6d media: gen-errors.rst: document ENXIO error code
This error can be produced at least at the DVB subsystem.

As it is generic enough, document it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:15:21 -04:00
Mauro Carvalho Chehab
d12502b84c media: gen-errors.rst: remove row number comments
Those are introduced by the conversion scripts and don't
really help. Get rid of them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:15:04 -04:00
Mauro Carvalho Chehab
07ebca6202 media: dvb uapi docs: better organize header files
Instead of having one chapter per file, place all of them at
the same chapter. That better organize the chapters at the uAPI
documentation.

As a side effect, now all uAPI headers are at the same page,
at the html output, with makes easier to use it as a reference
index for the spec.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:14:16 -04:00
Mauro Carvalho Chehab
bbed074e8c media: dvb rst: identify the documentation gap at the API
Now that DVB spec is almost in sync, document what's missing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:13:16 -04:00
Mauro Carvalho Chehab
3304727434 media: dvb CA docs: place undocumented data together with ioctls
Right now, the same undocumented structs are on two places:
at ca_data_types.rst and together with their ioctls.

Move them to just one place and use the standard way to
represent them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:12:54 -04:00
Mauro Carvalho Chehab
e0f891d846 media: ca-get-descr-info.rst: document this ioctl
Instead of a generic boilerplate, fill it with relevant
information about this ioctl.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:12:35 -04:00
Mauro Carvalho Chehab
5d153fb888 media: ca-get-slot-info.rst: document this ioctl
Instead of a generic boilerplate, fill it with relevant
information about this ioctl.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:12:16 -04:00
Mauro Carvalho Chehab
3c71bfd433 media: ca-get-cap.rst: document this ioctl
Instead of a generic boilerplate, fill it with relevant
information about this ioctl.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:11:59 -04:00
Mauro Carvalho Chehab
12fe8a4100 media: ca-reset.rst: add some description to this ioctl
While we don't have any documentation for it, based on what's
there at Kaffeine and VDR, it seems that this command should
be issued before start using CA. So, document it as such.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:11:44 -04:00
Mauro Carvalho Chehab
fed7c4fe8b media: ca.h: document most CA data types
For most of the stuff there, documenting is easy, as the
header file contains information.

Yet, I was unable to document two data structs:
	ca_msg and ca_descr

As those two structs are used by a few drivers, keep them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:10:33 -04:00
Mauro Carvalho Chehab
833ff5e7fe media: ca.h: get rid of CA_SET_PID
This ioctl seems to be some attempt to support a feature
at the bt8xx dst_ca driver. Yet, as said there, it
"needs more work". Right now, the code there is just
a boilerplate.

At the end of the day, no driver uses this ioctl, nor it is
documented anywhere (except for "needs more work").

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:06:56 -04:00
Mauro Carvalho Chehab
abe8ee991c media: net.rst: Fix the level of a section of the net chapter
Due to a mistake, the DVB net chapter was actually broken
into two different chapters. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:06:14 -04:00
Mauro Carvalho Chehab
bb98e6d280 media: dmx.h: add kernel-doc markups and use it at Documentation/
The demux documentation is pretty poor nowadays: most of the
structs and enums aren't documented at all.

Add proper kernel-doc markups for them and use it.

Now, the demux API data structures are fully documented :-)

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:05:40 -04:00
Mauro Carvalho Chehab
2889017c92 media: dmx.h: get rid of GET_DMX_EVENT
This seems to be a pure fictional API :-)

It only exists at the DVB book, with no code implemeting it.

So, just get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:02:20 -04:00
Mauro Carvalho Chehab
13adefbe9e media: dmx.h: get rid of DMX_SET_SOURCE
No driver uses this ioctl, nor it is documented anywhere.

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:01:54 -04:00
Mauro Carvalho Chehab
286fe1ca3f media: dmx.h: get rid of DMX_GET_CAPS
There's no driver currently using it; it is also not
documented about what it would be supposed to do.

So, get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:00:49 -04:00
Mauro Carvalho Chehab
791edca568 media: dmx.h: get rid of unused DMX_KERNEL_CLIENT
There's a flag defined for Digital TV demux that is not used
anywhere, called DMX_KERNEL_CLIENT. Get rid of it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:00:18 -04:00
Mauro Carvalho Chehab
7d661edd0d media: fe_property_parameters.rst: better document bandwidth
Use a table to document the supported bandwidths. That makes
it clearer to readers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:59:23 -04:00
Mauro Carvalho Chehab
1181415dc6 media: fe_property_parameters.rst: better define properties usage
Several frontend properties are specific to a subset of the
delivery systems. Make it clearer when describing each
property.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:58:00 -04:00
Mauro Carvalho Chehab
9d5e27cbc1 media: dvb frontend docs: use kernel-doc documentation
Now that frontend.h contains most documentation for the frontend,
remove the duplicated information from Documentation/ and use the
kernel-doc auto-generated one instead.

That should simplify maintainership of DVB frontend uAPI, as most
of the documentation will stick with the header file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:57:35 -04:00
Mauro Carvalho Chehab
192f8bc133 media: dvb/intro: adjust the notices about optional hardware
Both CA and decoders are optional. Also, the presence or
absence has nothing to do on being a PCI card or not.

Nowadays, most hardware leaves the decoders to either the
GPU or to some ISP inside the SoC, instead of implementing
it inside the Digital TV part of the device.

So, change the wording to reflect the hardware changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:52:12 -04:00
Mauro Carvalho Chehab
9a9bf23089 media: dvb/intro: update the history part of the document
Convergence doesn't exist anymore. The community itself maintains
the spec. Update accordingly.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:51:55 -04:00
Mauro Carvalho Chehab
3e202f2b32 media: dvb/intro: update references for TV standards
The references there are only for DVB. Add missing references for
ATSC and ISDB standards.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:50:36 -04:00
Mauro Carvalho Chehab
89aba6adc1 media: dvb/intro: use the term Digital TV to refer to the system
On several places at the introduction, a digital TV board and its
kernel support is called as DVB. The reason is simple: by the
time the document was written, there were no other digital TV
standards :-)

Modernize the specs by referring to them as Digital TV.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 05:50:21 -04:00
Andrey Smirnov
ce994077ce dt-bindings: mfd: Add bindings for ZII RAVE devices
Add Device Tree bindings for RAVE Supervisory Processor, an MCU
implementing varoius bits of housekeeping functionality (watchdoging,
backlight control, LED control, etc) on RAVE family of products by
Zodiac Inflight Innovations.

Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:02 +01:00
Marek Vasut
e10feb36c9 mfd: Add ROHM BD9571MWV-M PMIC DT bindings
Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has
the following features:
- multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail
- one voltage regulator for DVFS
- two GPIOs

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:01 +01:00
Chen-Yu Tsai
462ae14190 dt-bindings: mfd: axp20x: Introduce bindings for AXP813
The X-Powers AXP813 is a PMIC designed to be paired with Allwinner's
A83T SoC. There is also an AXP818, which is paired with the H8 SoC.

The two models seem to be identical, apart from the external markings.

This patch introduces the basic mfd and regulator bindings for the
AXP813.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:01 +01:00
Chen-Yu Tsai
7e312ffdd7 dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
The binding already lists compatibles and regulators for the AXP806,
but it is missing from the list of supported chips at the beginning.

Add it.

Fixes: 204ae2963e ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:00 +01:00
Ludovic Desroches
757bce527d mfd: syscon: Update Atmel SMC binding doc
A new compatible string is introduced for SMC on sama5d2 to manage a
different layout of the registers.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
│Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:00 +01:00
Sebastian Reichel
5368b06dba dt-bindings: mfd: da9052: Support TSI as ADC
DA9052 allows using the touchscreen input pins as general purpose
analogue input pin by wiring analogue inputs to X+, X-, Y+ and Y-
and providing a reference voltage at TSIREF pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-05 08:46:00 +01:00
Lee Jones
3f979bf8f5 Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged 2017-09-05 08:45:36 +01:00
Andreas Färber
69c9d96ce6 dt-bindings: rtc: Add Realtek RTD1295
Add a binding for the RTC on the Realtek RTD119x/RTD129x SoC families.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:31:32 +02:00
Icenowy Zheng
a702e47eab dmaengine: sun6i: support V3s SoC variant
Allwinner V3s has a DMA engine similar to the ones from A31, but with
fewer channels and DRQs.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-05 09:07:20 +05:30
Sergei Shtylyov
a3f406d6d1 dmaengine: rcar-dmac: document R8A77970 bindings
Renesas R-Car V3M (R8A77970) SoC also has the R-Car gen2/3 compatible DMA
controllers, so document the SoC specific binding.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-05 09:04:42 +05:30
Linus Torvalds
f57091767a Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache quality monitoring update from Thomas Gleixner:
 "This update provides a complete rewrite of the Cache Quality
  Monitoring (CQM) facility.

  The existing CQM support was duct taped into perf with a lot of issues
  and the attempts to fix those turned out to be incomplete and
  horrible.

  After lengthy discussions it was decided to integrate the CQM support
  into the Resource Director Technology (RDT) facility, which is the
  obvious choise as in hardware CQM is part of RDT. This allowed to add
  Memory Bandwidth Monitoring support on top.

  As a result the mechanisms for allocating cache/memory bandwidth and
  the corresponding monitoring mechanisms are integrated into a single
  management facility with a consistent user interface"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  x86/intel_rdt: Turn off most RDT features on Skylake
  x86/intel_rdt: Add command line options for resource director technology
  x86/intel_rdt: Move special case code for Haswell to a quirk function
  x86/intel_rdt: Remove redundant ternary operator on return
  x86/intel_rdt/cqm: Improve limbo list processing
  x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
  x86/intel_rdt: Modify the intel_pqr_state for better performance
  x86/intel_rdt/cqm: Clear the default RMID during hotcpu
  x86/intel_rdt: Show bitmask of shareable resource with other executing units
  x86/intel_rdt/mbm: Handle counter overflow
  x86/intel_rdt/mbm: Add mbm counter initialization
  x86/intel_rdt/mbm: Basic counting of MBM events (total and local)
  x86/intel_rdt/cqm: Add CPU hotplug support
  x86/intel_rdt/cqm: Add sched_in support
  x86/intel_rdt: Introduce rdt_enable_key for scheduling
  x86/intel_rdt/cqm: Add mount,umount support
  x86/intel_rdt/cqm: Add rmdir support
  x86/intel_rdt: Separate the ctrl bits from rmdir
  x86/intel_rdt/cqm: Add mon_data
  x86/intel_rdt: Prepare for RDT monitor data support
  ...
2017-09-04 13:56:37 -07:00
Linus Torvalds
93cc1228b4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt subsystem delivers this time:

   - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support

   - Initial GIC-V4 support

   - Consolidation of the FSL MSI support

   - Utilize the effective affinity interface in various ARM irqchip
     drivers

   - Yet another interrupt chip driver (UniPhier AIDET)

   - Bulk conversion of the irq chip driver to use %pOF

   - The usual small fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  irqchip/ls-scfg-msi: Add MSI affinity support
  irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
  irqchip/ls-scfg-msi: Add LS1046a MSI support
  arm64: dts: ls1046a: Add MSI dts node
  arm64: dts: ls1043a: Share all MSIs
  arm: dts: ls1021a: Share all MSIs
  arm64: dts: ls1043a: Fix typo of MSI compatible string
  arm: dts: ls1021a: Fix typo of MSI compatible string
  irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
  irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
  irqchip/mmp: Make mmp_intc_conf const
  irqchip/gic: Make irq_chip const
  irqchip/gic-v3: Advertise GICv4 support to KVM
  irqchip/gic-v4: Enable low-level GICv4 operations
  irqchip/gic-v4: Add some basic documentation
  irqchip/gic-v4: Add VLPI configuration interface
  irqchip/gic-v4: Add VPE command interface
  irqchip/gic-v4: Add per-VM VPE domain creation
  irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
  irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
  ...
2017-09-04 13:08:27 -07:00
Linus Torvalds
dd90cccffc Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "A rather small update for the time(r) subsystem:

   - A new clocksource driver IMX-TPM

   - Minor fixes to the alarmtimer facility

   - Device tree cleanups for Renesas drivers

   - A new kselftest and fixes for the timer related tests

   - Conversion of the clocksource drivers to use %pOF

   - Use the proper helpers to access rlimits in the posix-cpu-timer
     code"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Ensure RTC module is not unloaded
  clocksource: Convert to using %pOF instead of full_name
  clocksource/drivers/bcm2835: Remove message for a memory allocation failure
  devicetree: bindings: Remove deprecated properties
  devicetree: bindings: Remove unused 32-bit CMT bindings
  devicetree: bindings: Deprecate property, update example
  devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
  devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
  devicetree: bindings: Remove sh7372 CMT binding
  clocksource/drivers/imx-tpm: Add imx tpm timer support
  dt-bindings: timer: Add nxp tpm timer binding doc
  posix-cpu-timers: Use dedicated helper to access rlimit values
  alarmtimer: Fix unavailable wake-up source in sysfs
  timekeeping: Use proper timekeeper for debug code
  kselftests: timers: set-timer-lat: Add one-shot timer test cases
  kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
  kselftests: timers: freq-step: Fix build warning
  kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
2017-09-04 13:06:34 -07:00
Miklos Szeredi
495e642939 vfs: add flags to d_real()
Add a separate flags argument (in addition to the open flags) to control
the behavior of d_real().

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-04 21:42:22 +02:00
Linus Torvalds
b1b6f83ac9 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
 "PCID support, 5-level paging support, Secure Memory Encryption support

  The main changes in this cycle are support for three new, complex
  hardware features of x86 CPUs:

   - Add 5-level paging support, which is a new hardware feature on
     upcoming Intel CPUs allowing up to 128 PB of virtual address space
     and 4 PB of physical RAM space - a 512-fold increase over the old
     limits. (Supercomputers of the future forecasting hurricanes on an
     ever warming planet can certainly make good use of more RAM.)

     Many of the necessary changes went upstream in previous cycles,
     v4.14 is the first kernel that can enable 5-level paging.

     This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
     default.

     (By Kirill A. Shutemov)

   - Add 'encrypted memory' support, which is a new hardware feature on
     upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
     RAM to be encrypted and decrypted (mostly) transparently by the
     CPU, with a little help from the kernel to transition to/from
     encrypted RAM. Such RAM should be more secure against various
     attacks like RAM access via the memory bus and should make the
     radio signature of memory bus traffic harder to intercept (and
     decrypt) as well.

     This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
     by default.

     (By Tom Lendacky)

   - Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
     hardware feature that attaches an address space tag to TLB entries
     and thus allows to skip TLB flushing in many cases, even if we
     switch mm's.

     (By Andy Lutomirski)

  All three of these features were in the works for a long time, and
  it's coincidence of the three independent development paths that they
  are all enabled in v4.14 at once"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
  x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
  x86/mm: Use pr_cont() in dump_pagetable()
  x86/mm: Fix SME encryption stack ptr handling
  kvm/x86: Avoid clearing the C-bit in rsvd_bits()
  x86/CPU: Align CR3 defines
  x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
  acpi, x86/mm: Remove encryption mask from ACPI page protection type
  x86/mm, kexec: Fix memory corruption with SME on successive kexecs
  x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
  x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
  x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
  x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
  x86/mm: Allow userspace have mappings above 47-bit
  x86/mm: Prepare to expose larger address space to userspace
  x86/mpx: Do not allow MPX if we have mappings above 47-bit
  x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
  x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
  x86/mm/dump_pagetables: Fix printout of p4d level
  x86/mm/dump_pagetables: Generalize address normalization
  x86/boot: Fix memremap() related build failure
  ...
2017-09-04 12:21:28 -07:00
Hauke Mehrtens
dea54fbad3 phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module
This driver starts the DWC2 core(s) built into the XWAY SoCs and provides
the PHY interfaces for each core. The phy instances can be passed to the
dwc2 driver, which already supports the generic phy interface.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: martin.blumenstingl@googlemail.com
Cc: john@phrozen.org
Cc: andy.shevchenko@gmail.com
Cc: p.zabel@pengutronix.de
Cc: mark.rutland@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17127/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04 21:19:02 +02:00