Commit Graph

53 Commits

Author SHA1 Message Date
Joe Thornber
fca028438f dm space map metadata: fix bug in resizing of thin metadata
This bug was introduced in commit 7e664b3dec ("dm space map metadata:
fix extending the space map").

When extending a dm-thin metadata volume we:

- Switch the space map into a simple bootstrap mode, which allocates
  all space linearly from the newly added space.
- Add new bitmap entries for the new space
- Increment the reference counts for those newly allocated bitmap
  entries
- Commit changes to disk
- Switch back out of bootstrap mode.

But, the disk commit may allocate space itself, if so this fact will be
lost when switching out of bootstrap mode.

The bug exhibited itself as an error when the bitmap_root, with an
erroneous ref count of 0, was subsequently decremented as part of a
later disk commit.  This would cause the disk commit to fail, and thinp
to enter read_only mode.  The metadata was not damaged (thin_check
passed).

The fix is to put the increments + commit into a loop, running until
the commit has not allocated extra space.  In practise this loop only
runs twice.

With this fix the following device mapper testsuite test passes:
 dmtest run --suite thin-provisioning -n thin_remove_works_after_resize

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # depends on commit 7e664b3dec
2014-01-21 12:15:01 -05:00
Joe Thornber
f164e6900f dm btree: add dm_btree_find_lowest_key
dm_btree_find_lowest_key is the reciprocal of dm_btree_find_highest_key.
Factor out common code for dm_btree_find_{highest,lowest}_key.

dm_btree_find_lowest_key is needed for an upcoming DM target, as such it
is best to get this interface in place.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-01-09 16:29:17 -05:00
Joe Thornber
7e664b3dec dm space map metadata: fix extending the space map
When extending a metadata space map we should do the first commit whilst
still in bootstrap mode -- a mode where all blocks get allocated in the
new area.

That way the commit overhead is allocated from the newly added space.
Otherwise we risk running out of space.

With this fix, and the previous commit "dm space map common: make sure
new space is used during extend", the following device mapper testsuite
test passes:
 dmtest run --suite thin-provisioning -n /resize_metadata_no_io/

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2014-01-07 21:05:18 -05:00
Joe Thornber
12c91a5c2d dm space map common: make sure new space is used during extend
When extending a low level space map we should update nr_blocks at
the start so the new space is used for the index entries.

Otherwise extend can fail, e.g.: sm_metadata_extend call sequence
that fails:
 -> sm_ll_extend
    -> dm_tm_new_block -> dm_sm_new_block -> sm_bootstrap_new_block
    => returns -ENOSPC because smm->begin == smm->ll.nr_blocks

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2014-01-07 21:05:17 -05:00
Mike Snitzer
10343180f5 dm persistent data: cleanup dm-thin specific references in text
DM's persistent-data library is now used my multiple targets so
exclusive references to "pool" or "thin provisioning" need to be
cleaned up.  Adjust Kconfig's DM_DEBUG_BLOCK_STACK_TRACING text
and remove "pool" from a block manager error message.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2014-01-07 10:11:54 -05:00
Mike Snitzer
c46985e211 dm space map metadata: limit errors in sm_metadata_new_block
The "unable to allocate new metadata block" error can be a particularly
verbose error if there is a systemic issue with the metadata device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2014-01-07 10:11:46 -05:00
Joe Thornber
ed9571f0cf dm array: fix a reference counting bug in shadow_ablock
An old array block could have its reference count decremented below
zero when it is being replaced in the btree by a new array block.

The fix is to increment the old ablock's reference count just before
inserting a new ablock into the btree.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.9+
2013-12-13 14:22:10 -05:00
Joe Thornber
5b564d80f8 dm space map: disallow decrementing a reference count below zero
The old behaviour, returning -EINVAL if a ref_count of 0 would be
decremented, was removed in commit f722063 ("dm space map: optimise
sm_ll_dec and sm_ll_inc").  To fix this regression we return an error
code from the mutator function pointer passed to sm_ll_mutate() and have
dec_ref_count() return -EINVAL if the old ref_count is 0.

Add a DMERR to reflect the potential seriousness of this error.

Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path.

With this fix the following dmts regression test now passes:
 dmtest run --suite cache -n /metadata_use_kernel/

The next patch fixes the higher-level dm-array code that exposed this
regression.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.12+
2013-12-13 14:22:09 -05:00
Joe Thornber
9b7aaa64f9 dm thin: allow pool in read-only mode to transition to read-write mode
A thin-pool may be in read-only mode because the pool's data or metadata
space was exhausted.  To allow for recovery, by adding more space to the
pool, we must allow a pool to transition from PM_READ_ONLY to PM_WRITE
mode.  Otherwise, running out of space will render the pool permanently
read-only.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2013-12-10 16:35:13 -05:00
Mike Snitzer
f62b6b8f49 dm space map metadata: return on failure in sm_metadata_new_block
Commit 2fc48021f4 ("dm persistent
metadata: add space map threshold callback") introduced a regression
to the metadata block allocation path that resulted in errors being
ignored.  This regression was uncovered by running the following
device-mapper-test-suite test:
dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/

The ignored error codes in sm_metadata_new_block() could crash the
kernel through use of either the dm-thin or dm-cache targets, e.g.:

device-mapper: thin: 253:4: reached low water mark for metadata device: sending event.
device-mapper: space map metadata: unable to allocate new metadata block
general protection fault: 0000 [#1] SMP
...
Workqueue: dm-thin do_worker [dm_thin_pool]
task: ffff880035ce2ab0 ti: ffff88021a054000 task.ti: ffff88021a054000
RIP: 0010:[<ffffffffa0331385>]  [<ffffffffa0331385>] metadata_ll_load_ie+0x15/0x30 [dm_persistent_data]
RSP: 0018:ffff88021a055a68  EFLAGS: 00010202
RAX: 003fc8243d212ba0 RBX: ffff88021a780070 RCX: ffff88021a055a78
RDX: ffff88021a055a78 RSI: 0040402222a92a80 RDI: ffff88021a780070
RBP: ffff88021a055a68 R08: ffff88021a055ba4 R09: 0000000000000010
R10: 0000000000000000 R11: 00000002a02e1000 R12: ffff88021a055ad4
R13: 0000000000000598 R14: ffffffffa0338470 R15: ffff88021a055ba4
FS:  0000000000000000(0000) GS:ffff88033fca0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f467c0291b8 CR3: 0000000001a0b000 CR4: 00000000000007e0
Stack:
 ffff88021a055ab8 ffffffffa0332020 ffff88021a055b30 0000000000000001
 ffff88021a055b30 0000000000000000 ffff88021a055b18 0000000000000000
 ffff88021a055ba4 ffff88021a055b98 ffff88021a055ae8 ffffffffa033304c
Call Trace:
 [<ffffffffa0332020>] sm_ll_lookup_bitmap+0x40/0xa0 [dm_persistent_data]
 [<ffffffffa033304c>] sm_metadata_count_is_more_than_one+0x8c/0xc0 [dm_persistent_data]
 [<ffffffffa0333825>] dm_tm_shadow_block+0x65/0x110 [dm_persistent_data]
 [<ffffffffa0331b00>] sm_ll_mutate+0x80/0x300 [dm_persistent_data]
 [<ffffffffa0330e60>] ? set_ref_count+0x10/0x10 [dm_persistent_data]
 [<ffffffffa0331dba>] sm_ll_inc+0x1a/0x20 [dm_persistent_data]
 [<ffffffffa0332270>] sm_disk_new_block+0x60/0x80 [dm_persistent_data]
 [<ffffffff81520036>] ? down_write+0x16/0x40
 [<ffffffffa001e5c4>] dm_pool_alloc_data_block+0x54/0x80 [dm_thin_pool]
 [<ffffffffa001b23c>] alloc_data_block+0x9c/0x130 [dm_thin_pool]
 [<ffffffffa001c27e>] provision_block+0x4e/0x180 [dm_thin_pool]
 [<ffffffffa001fe9a>] ? dm_thin_find_block+0x6a/0x110 [dm_thin_pool]
 [<ffffffffa001c57a>] process_bio+0x1ca/0x1f0 [dm_thin_pool]
 [<ffffffff8111e2ed>] ? mempool_free+0x8d/0xa0
 [<ffffffffa001d755>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
 [<ffffffffa001d911>] do_worker+0x51/0x60 [dm_thin_pool]
 [<ffffffff81067872>] process_one_work+0x182/0x3b0
 [<ffffffff81068c90>] worker_thread+0x120/0x3a0
 [<ffffffff81068b70>] ? manage_workers+0x160/0x160
 [<ffffffff8106eb2e>] kthread+0xce/0xe0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Cc: stable@vger.kernel.org # v3.10+
2013-12-10 16:34:28 -05:00
Joe Thornber
40c57f475f dm space map disk: optimise sm_disk_dec_block
Don't waste time spotting blocks that have been allocated and then freed
in the same transaction.

The extra lookup is expensive, and I don't think it really gives us much.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2013-11-09 18:20:24 -05:00
Joe Thornber
9c1d4de560 dm array: fix bug in growing array
Entries would be lost if the old tail block was partially filled.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.9+
2013-11-05 11:20:50 -05:00
Joe Thornber
f722063ee0 dm space map: optimise sm_ll_dec and sm_ll_inc
Prior to this patch these methods did a lookup followed by an insert.
Instead they now call a common mutate function that adjusts the value
according to a callback function.  This avoids traversing the data
structures twice and hence improves performance.

Also factor out sm_ll_lookup_big_ref_count() for use by both
sm_ll_lookup() and sm_ll_mutate().

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00
Joe Thornber
04f17c802f dm btree: prefetch child nodes when walking tree for a dm_btree_del
dm-btree now takes advantage of dm-bufio's ability to prefetch data via
dm_bm_prefetch().  Prior to this change many btree node visits were
causing a synchronous read.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00
Joe Thornber
cd5acf0b44 dm btree: use pop_frame in dm_btree_del to cleanup code
Remove a visited leaf straight away from the stack, rather than
marking all it's children as visited and letting it get removed on the
next iteration.  May also offer a micro optimisation in dm_btree_del.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-08-23 09:02:14 -04:00
Joe Thornber
2fc48021f4 dm persistent metadata: add space map threshold callback
Add a threshold callback to dm persistent data space maps.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:20 +01:00
Joe Thornber
7c3d3f2a87 dm persistent data: add threshold callback to space map
Add a threshold callback function to the persistent data space map
interface for a subsequent patch to use.

dm-thin and dm-cache are interested in knowing when they're getting
low on metadata or data blocks.  This patch introduces a new method
for registering a callback against a threshold.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:20 +01:00
Joe Thornber
1921c56d95 dm persistent data: support space map resizing
Support extending a dm persistent data metadata space map.

The extend itself is implemented by switching back to the boostrap
allocator and pointing to the new space.  The extra bitmap indexes are
then allocated from the new space, and finally we switch back to the
proper space map ops and tweak the reference counts.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:19 +01:00
Joe Thornber
88a488f624 dm persistent data: fix error message typos
Fix some typos in dm-space-map-metadata.c error messages.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:17 +01:00
Joe Thornber
f046f89a99 dm thin: fix discard corruption
Fix a bug in dm_btree_remove that could leave leaf values with incorrect
reference counts.  The effect of this was that removal of a shared block
could result in the space maps thinking the block was no longer used.
More concretely, if you have a thin device and a snapshot of it, sending
a discard to a shared region of the thin could corrupt the snapshot.

Thinp uses a 2-level nested btree to store it's mappings.  This first
level is indexed by thin device, and the second level by logical
block.

Often when we're removing an entry in this mapping tree we need to
rebalance nodes, which can involve shadowing them, possibly creating a
copy if the block is shared.  If we do create a copy then children of
that node need to have their reference counts incremented.  In this
way reference counts percolate down the tree as shared trees diverge.

The rebalance functions were incrementing the children at the
appropriate time, but they were always assuming the children were
internal nodes.  This meant the leaf values (in our case packed
block/flags entries) were not being incremented.

Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-20 17:21:24 +00:00
Joe Thornber
c6b4fcbad0 dm: add cache target
Add a target that allows a fast device such as an SSD to be used as a
cache for a slower device such as a disk.

A plug-in architecture was chosen so that the decisions about which data
to migrate and when are delegated to interchangeable tunable policy
modules.  The first general purpose module we have developed, called
"mq" (multiqueue), follows in the next patch.  Other modules are
under development.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:51 +00:00
Joe Thornber
7a87edfee7 dm persistent data: add bitset
Add a persistent bitset as a wrapper around dm-array.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:51 +00:00
Joe Thornber
6513c29f44 dm persistent data: add transactional array
Add a transactional array.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:51 +00:00
Joe Thornber
4e7f1f9089 dm persistent data: add btree_walk
Add dm_btree_walk to iterate through the contents of a btree.
This will be used by the dm cache target.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:50 +00:00
Mike Snitzer
018cede93c dm persistent data: set some btree fn parms const
Mark some constant parameters constant in some dm-btree functions.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
Kees Cook
88ae4c5294 dm persistent data: remove CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:46 +00:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Andrew Morton
df8557982f drivers/md/persistent-data/dm-transaction-manager.c: rename HASH_SIZE
Fix the warning:

  drivers/md/persistent-data/dm-transaction-manager.c:28:1: warning: "HASH_SIZE" redefined
  In file included from include/linux/elevator.h:5,
                   from include/linux/blkdev.h:216,
                   from drivers/md/persistent-data/dm-block-manager.h:11,
                   from drivers/md/persistent-data/dm-transaction-manager.h:10,
                   from drivers/md/persistent-data/dm-transaction-manager.c:6:
  include/linux/hashtable.h:22:1: warning: this is the location of the previous definition

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:08 -08:00
Linus Torvalds
b49249d103 Miscellaneous device-mapper fixes, cleanups and performance improvements.
Of particular note:
 - Disable broken WRITE SAME support in all targets except linear and striped.
   Use it when kcopyd is zeroing blocks.
 - Remove several mempools from targets by moving the data into the bio's new
   front_pad area(which dm calls 'per_bio_data').
 - Fix a race in thin provisioning if discards are misused.
 - Prevent userspace from interfering with the ioctl parameters and
   use kmalloc for the data buffer if it's small instead of vmalloc.
 - Throttle some annoying error messages when I/O fails.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ1M5OAAoJEK2W1qbAHj1nrQcP/itnnAw8RNsSHBrFMrL9wVnB
 5dmZ1BXPZmEbG+ViU4wzVmRUPHuSHTwhIqH7UFPjyCgbWaz1jaXfpyIxBsxlJi4E
 zuGjv46akANMwH0o/aJDRuEIrCnMtjLrMiY2Oq00lJFvATurwYAKSIgmnwRVdAYy
 gDehJhaymNtHVjhymu33xEn/hqqkQtUbMDj9o+IZppmAw1aQyNuYnwQu3HvcETuz
 /JBcs8isXKIQMJdMLFdGg7lZjLO241UvSwCAeGycKkupHLaYfycumPywgdiNFVUg
 L6pQP9RtAQ+H2VBQ1OIVMJxqiXxQ0xHhyxUYIe3reTar+RXoMA0yK+FiJTwSY1cE
 Xk0s8x2DXwUyu3Vx7UmvgUXnMgd4TIPITYBYiOAanEF/8Xt0voZn8mzNyyzsyFXy
 0u1vMRK+ZK7+QPio9LRh7bgHNK1g5ZyShvwqTMDmtlp+uskaP4iHDDGtVUjFA+Wf
 r9Ms0CXPbXIN6laUIT/4L3LJZtyRWB6e8wuCrUWIWWRbjrMPaPnB+/NlckGJ0CHa
 P/5r1rmLdneTEZ8Vx/2g3fBJ+H2uNQKhYujjnE0HqtHP+tvjt7ernibyU2QhNBeE
 Zy0PXRatY0Xn7UFpn44uJ2qxkWaO5Dloaa4HkWdlWFdR3f/u5MzVjy5mDXLUxkGq
 wj2Z3YkjYjy948MViBhD
 =yzhS
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

Pull dm update from Alasdair G Kergon:
 "Miscellaneous device-mapper fixes, cleanups and performance
  improvements.

  Of particular note:
   - Disable broken WRITE SAME support in all targets except linear and
     striped.  Use it when kcopyd is zeroing blocks.
   - Remove several mempools from targets by moving the data into the
     bio's new front_pad area(which dm calls 'per_bio_data').
   - Fix a race in thin provisioning if discards are misused.
   - Prevent userspace from interfering with the ioctl parameters and
     use kmalloc for the data buffer if it's small instead of vmalloc.
   - Throttle some annoying error messages when I/O fails."

* tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits)
  dm stripe: add WRITE SAME support
  dm: remove map_info
  dm snapshot: do not use map_context
  dm thin: dont use map_context
  dm raid1: dont use map_context
  dm flakey: dont use map_context
  dm raid1: rename read_record to bio_record
  dm: move target request nr to dm_target_io
  dm snapshot: use per_bio_data
  dm verity: use per_bio_data
  dm raid1: use per_bio_data
  dm: introduce per_bio_data
  dm kcopyd: add WRITE SAME support to dm_kcopyd_zero
  dm linear: add WRITE SAME support
  dm: add WRITE SAME support
  dm: prepare to support WRITE SAME
  dm ioctl: use kmalloc if possible
  dm ioctl: remove PF_MEMALLOC
  dm persistent data: improve improve space map block alloc failure message
  dm thin: use DMERR_LIMIT for errors
  ...
2012-12-21 17:08:06 -08:00
Joe Thornber
7960123f2d dm persistent data: improve improve space map block alloc failure message
Improve space map error message when unable to allocate a new
metadata block.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:36 +00:00
Mike Snitzer
89ddeb8cb1 dm persistent data: use DMERR_LIMIT for errors
Nearly all of persistent-data is in the IO path so throttle error
messages with DMERR_LIMIT to limit the amount logged when
something has gone wrong.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:34 +00:00
Mike Snitzer
a5bd968aeb dm block manager: reinstate message when validator fails
Reinstate a useful error message when the block manager buffer validator fails.
This was mistakenly eliminated when the block manager was converted to use
dm-bufio.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:34 +00:00
Joe Thornber
e3cbf94513 dm persistent data: fix nested btree deletion
When deleting nested btrees, the code forgets to delete the innermost
btree.  The thin-metadata code serendipitously compensates for this by
claiming there is one extra layer in the tree.

This patch corrects both problems.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:32 +00:00
Mikulas Patocka
550929faf8 dm persistent data: rename node to btree_node
This patch fixes a compilation failure on sparc32 by renaming struct node.

struct node is already defined in include/linux/node.h. On sparc32, it
happens to be included through other dependencies and persistent-data
doesn't compile because of conflicting declarations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:30 +00:00
Masanari Iida
83f0d77a7f md: Fix typo in drivers/md
Correct spelling typo in drivers/md.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-29 22:57:50 +01:00
Wei Yongjun
0bcf08798e dm persistent data: convert to use le32_add_cpu
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-10-12 16:59:47 +01:00
Joe Thornber
310975573b dm persistent data: introduce dm_bm_set_read_only
Introduce dm_bm_set_read_only to switch the block manager into a
read-only mode.  To be used when dm-thin degrades due to io errors on
the metadata device.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:15 +01:00
Joe Thornber
3c9ad9bd87 dm persistent data: stop using dm_bm_unlock_move when shadowing blocks in tm
Stop using dm_bm_unlock_move when shadowing blocks in the transaction
manager as an optimisation and remove the function as it is then no
longer used.

Some code, such as the space maps, keeps using on-disk data structures
from the previous transaction.  It can do this because blocks won't
be reallocated until the subsequent transaction.  Using
dm_bm_unlock_move to copy blocks sounds like a win, but it forces a
synchronous read should the old block be accessed.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:09 +01:00
Joe Thornber
384ef0e62e dm persistent data: tidy transaction manager creation fns
Tidy the transaction manager creation functions.

They no longer lock the superblock.  Superblock locking is pulled out to
the caller.

Also export dm_bm_write_lock_zero.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:09 +01:00
Joe Thornber
51a0f659c0 dm persistent data: create new dm_block_manager struct
This patch introduces a separate struct for the block_manager.
It also uses IS_ERR to check the return value of dm_bufio_client_create
instead of testing incorrectly for NULL.

Prior to this patch a struct dm_block_manager was really an alias for
a struct dm_bufio_client.  We want to add some functionality to the
block manager that will require extra fields, so this one to one
mapping is no longer valid.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:08 +01:00
Joe Thornber
f4b90369d3 dm persistent data: only commit space map if index changed
Introduce bitmap_index_changed to track whether or not the index changed
then only commit a space map if it did.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:06 +01:00
Joe Thornber
8d44c98aac dm persistent data: always unlock superblock in dm_bm_flush_and_unlock
Unlock the superblock even if initial dm_bufio_write_dirty_buffers fails.

Also, remove redundant flush calls.  dm_bm_flush_and_unlock's calls to
dm_bufio_write_dirty_buffers already result in dm_bufio_issue_flush
being called.

This avoids warnings about unflushed dirty buffers from bufio.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:06 +01:00
Joe Thornber
3caf6d73d4 dm persistent data: remove debug space map checker
Remove debug space map checker from dm persistent data.

The space map checker is a wrapper for other space maps that double
checks the reference counts are correct.  It holds all these reference
counts in memory rather than on disk, so uses a lot of memory and is
thus restricted to small pools.

As yet, this checker hasn't found any issues, but has caused a few of
its own due to people turning it on by default with larger pools.

Removing.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:07:58 +01:00
Mike Snitzer
b0239faaf8 dm persistent data: fix allocation failure in space map checker init
If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and memory is fragmented and a
sufficiently-large metadata device is used in a thin pool then the space
map checker will fail to allocate the memory it requires.

Switch from kmalloc to vmalloc to allow larger virtually contiguous
allocations for the space map checker's internal count arrays.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-03 12:55:37 +01:00
Mike Snitzer
62662303e7 dm persistent data: handle space map checker creation failure
If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and dm_sm_checker_create()
fails, dm_tm_create_internal() would still return success even though it
cleaned up all resources it was supposed to have created.  This will
lead to a kernel crash:

general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
...
RIP: 0010:[<ffffffff81593659>]  [<ffffffff81593659>] dm_bufio_get_block_size+0x9/0x20
Call Trace:
  [<ffffffff81599bae>] dm_bm_block_size+0xe/0x10
  [<ffffffff8159b8b8>] sm_ll_init+0x78/0xd0
  [<ffffffff8159c1a6>] sm_ll_new_disk+0x16/0xa0
  [<ffffffff8159c98e>] dm_sm_disk_create+0xfe/0x160
  [<ffffffff815abf6e>] dm_pool_metadata_open+0x16e/0x6a0
  [<ffffffff815aa010>] pool_ctr+0x3f0/0x900
  [<ffffffff8158d565>] dm_table_add_target+0x195/0x450
  [<ffffffff815904c4>] table_load+0xe4/0x330
  [<ffffffff815917ea>] ctl_ioctl+0x15a/0x2c0
  [<ffffffff81591963>] dm_ctl_ioctl+0x13/0x20
  [<ffffffff8116a4f8>] do_vfs_ioctl+0x98/0x560
  [<ffffffff8116aa51>] sys_ioctl+0x91/0xa0
  [<ffffffff81869f52>] system_call_fastpath+0x16/0x1b

Fix the space map checker code to return an appropriate ERR_PTR and have
dm_sm_disk_create() and dm_tm_create_internal() check for it with
IS_ERR.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-03 12:55:35 +01:00
Mike Snitzer
25d7cd6faa dm persistent data: fix shadow_info_leak on dm_tm_destroy
Cleanup the shadow table before destroying the transaction manager.

Reference: leak was identified with kmemleak when running
test_discard_random_sectors in the thinp-test-suite.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-03 12:55:33 +01:00
Joe Thornber
cc8394d86f dm thin: provide userspace access to pool metadata
This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03 00:30:01 +01:00
Joe Thornber
71fd5ae25d dm persistent data: remove space map ref_count entries if redundant
Save space by removing entries from the space map ref_count tree if
they're no longer needed.

Ref counts are stored in two places: a bitmap if the ref_count is
below 3, or a btree of uint32_t if 3 or above.

When a ref_count that was above 3 drops below we can remove it from
the tree and save some metadata space.  This removal was commented out
before because I was unsure why this was causing under-populated btree
nodes.  Earlier patches have fixed this issue.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:27 +01:00
Joe Thornber
a3aefb395e dm persistent data: remove redundant value_size arg from value_ptr
Now that the value_size is held within every node of the btrees we can
remove this argument from value_ptr().

For the last few months a BUG_ON has been checking this argument is
the same as that held in the node.  No issues were reported.  So this
is a safe change.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:25 +01:00
Joe Thornber
b0988900ba dm persistent data: fix btree rebalancing after remove
When we remove an entry from a node we sometimes rebalance with it's
two neighbours.  This wasn't being done correctly; in some cases
entries have to move all the way from the right neighbour to the left
neighbour, or vice versa.  This patch pretty much re-writes the
balancing code to fix it.

This code is barely used currently; only when you delete a thin
device, and then only if you have hundreds of them in the same pool.
Once we have discard support, which removes mappings, this will be used
much more heavily.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:23 +01:00