64-bit ELF v2 ABI specification for POWER describes, on section "General
Stack Frame Requirements", that the stack should use the following
instructions when compiled with backchain:
mflr r0
std r0, 16(r1)
stdu r1, -XX(r1)
Where XX is the frame size for that function, and this is the value
checkstack.pl will find the stack size for each function.
This patch also simplifies the entire Powerpc section, since just two
type of instructions are used, 'stdu' for 64 bits and 'stwu' for 32 bits
platform.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Blackfin port has been removed from the kernel, also remove the
blackfin specific bits from the checkstack.pl script.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that arch/metag/ has been removed, drop a bunch of metag references
in various codes across the whole tree:
- VM_GROWSUP and __VM_ARCH_SPECIFIC_1.
- MT_METAG_* ELF note types.
- METAG Kconfig dependencies (FRAME_POINTER) and ranges
(MAX_STACK_SIZE_MB).
- metag cases in tools (checkstack.pl, recordmcount.c, perf).
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-metag@vger.kernel.org
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The AVR32 architecture support has been removed from the kernel, hence
remove the related bits from checkstack.pl script.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Håvard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYsL7RAAoJEMOzHC1eZifkXmgP/1HI2c+UeFbV9RVy0AjwQZr0
wgE0qM3ICD1ZV+gNqP4zN0NAIECq1p3qLAV94P+mkfpFc04FZcdysME8ZgvNyzTN
BlELpElVKpE9KqlEE7beoybpyc2GlCaieEFB1ouj8lW/nUSc4apqHDh/OVqRssfu
QyQ3FDIt6ejvMzq6XRFYJtxL3e8qwAhlIiQBxFYR2b+9MoPgz7Ctf0j0a2SGeTFD
UmUz5IGkMXicv91YJeD7vb0iP0ujpbFrXGXneSLS6InzS7h5cZGw1O9B2cyVbBMN
unA02MVc/9rz/96J6MIC1GnlI5IuWvsbC0nIRkTukHFVQEcrxmX5BO9iQ47dJ0+n
XpCvhRm7djrdkqRsGx8y9xG9hAVXu8a2EyWDz91dJLU8JpTkHkErOLBvmKBEp3kE
/K+k75SGIVKpy7hU9buyMmlOhQY09sdzdzfyqCaXD7H4nImShZGmcrZV10mBlZtJ
7k+Ke+fm0EpEewOVyOzwEGjTPr3LDzYCpm2qjOG9/zZd6MX0da8eH2X7DzB9GDWW
yR5UiGbtFVE0M13tfE58aVueVRt0o+wLwRZZYur643aLPyypxHWTl3RAhuhv9NzD
TaB8n3J6kDt+E5ivzPm2439AM/p9ZcyNGScUSxo84lwXW74ozcpfz029Yvhw52F9
cD4kHEFG7+OYdbZmwV3C
=wmBO
-----END PGP SIGNATURE-----
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Highlights include:
- optimized memset and memcpy routines, ~20% boot time saving
- support for cpu idling
- adding support for l.swa and l.lwa atomic operations (in spec from
2014)
- use atomics to implement: bitops, cmpxchg, futex
- the atomics are in preparation for SMP support"
* tag 'openrisc-for-linus' of git://github.com/openrisc/linux: (25 commits)
openrisc: head: Init r0 to 0 on start
openrisc: Export ioremap symbols used by modules
arch/openrisc/lib/memcpy.c: use correct OR1200 option
openrisc: head: Remove unused strings
openrisc: head: Move init strings to rodata section
openrisc: entry: Fix delay slot detection
openrisc: entry: Whitespace and comment cleanups
scripts/checkstack.pl: Add openrisc support
MAINTAINERS: Add the openrisc official repository
openrisc: Add .gitignore
openrisc: Add optimized memcpy routine
openrisc: Add optimized memset
openrisc: Initial support for the idle state
openrisc: Fix the bitmask for the unit present register
openrisc: remove unnecessary stddef.h include
openrisc: add futex_atomic_* implementations
openrisc: add optimized atomic operations
openrisc: add cmpxchg and xchg implementations
openrisc: add atomic bitops
openrisc: add l.lwa/l.swa emulation
...
AArch64 stores the frame pointer and return pointer, and decrements the
stack. Also remove my (no longer valid) email address.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for ARCH=x86 into checkstack.
Commit ffee0de411 ("x86: Default to ARCH=x86 to avoid overriding
CONFIG_64BIT") had merged ARCH=i386 and ARCH=x86_64 into one ARCH=x86.
checkstack.pl searches patterns of machine instructions which are
usually used for allocating stack frames. checkstalk.pl needs either
i386 or x86_64, x86 isn't enough:
$ make checkstack
objdump -d vmlinux $(find . -name '*.ko') | \
perl linux/scripts/checkstack.pl x86
wrong or unknown architecture "x86"
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup checkstack script:
* Turn on strict checking
* Fix resulting error message because the declaration syntax
was incorrect.
* Remove incorrect and misleading use of prototype
- prototype not required for this type of sort function
because $a and $b are being used in this contex
- if prototype was being used it should be for both arguments
* Use closure for sort function
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
With -march=z990 and later gcc can use the long displacement facility
insruction lay for stack register handling. This patch adopts checkstack
to catch lay in addition to ahi and aghi.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
uname -m was leaving a newline in $arch, and not passing the tests.
Also, printing the unknown arch on failure is probably helpful.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, checkstack.pl only looks for fixed subtractions from the stack
pointer. However, things like this:
void function(int size)
{
char stackbuster[size << 2];
...
are certainly worth pointing out, I think.
This could perhaps be done more cleanly, and the following patch only
adds "dynamic" REs for x86 and x86_64, but it works:
0x00b0 crypto_cbc_decrypt_inplace [cbc]: Dynamic (%rax)
0x00ad crypto_pcbc_decrypt_inplace [pcbc]: Dynamic (%rax)
0x02f6 crypto_pcbc_encrypt_inplace [pcbc]: Dynamic (%rax)
0x036c _crypto_xcbc_digest_setkey [xcbc]: Dynamic (%rax)
...
(Inspired by Keith Owens' old stack-check script)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have been prime author and maintainer of block2mtd from day one, but
neither MAINTAINERS nor the module source makes this fact clear. And while
I'm at it, update my email addresses tree-wide, as the old address
currently bounces and change my name to "joern" as unicode will likely
continue to cause trouble until the end of this century.
Signed-off-by: Joern Engel <joern@lazybastard.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'master' of hera.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (29 commits)
[PARISC] fix uninitialized variable warning in asm/rtc.h
[PARISC] Port checkstack.pl to parisc
[PARISC] Make palo target work when $obj != $src
[PARISC] Zap unused variable warnings in pci.c
[PARISC] Fix tests in palo target
[PARISC] Fix palo target
[PARISC] Restore palo target
[PARISC] Attempt to clean up parisc/Makefile
[PARISC] Fix infinite loop in /proc/iomem
[PARISC] Quiet sysfs_create_link __must_check warnings in pdc_stable
[PARISC] Squelch pci_enable_device __must_check warning in superio
[PARISC] Kill off broken irqstack code
[PARISC] Remove hardcoded uses of PAGE_SIZE
[PARISC] Clean up pointless ASM_PAGE_SIZE_DIV use
[PARISC] Kill off the last vestiges of ASM_PAGE_SIZE
[PARISC] Kill off ASM_PAGE_SIZE use
[PARISC] Beautify parisc vmlinux.lds.S
[PARISC] Clean up a resource_size_t warning in sba_iommu
[PARISC] Kill incorrect cast warning in unwinder
[PARISC] Kill zone_to_nid printk warning
...
Fixed trivial conflict in include/asm-parisc/tlbflush.h manually
Trivial change in a comment.
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Andre Haupt <andre@finow14.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simply fill out the bits in checkstack.pl for Blackfin. I thought I already
sent this, but I don't see it in -mm anywhere ...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds 'powerpc' architecture support to checkstack.pl.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Finding "init_module" high stack usage problems is challenging when there
are over 1600 "init_module" functions in the kernel tree, so make
checkstack.pl print out the filename where the stack usage occurs. This is
useful for code built as loadable modules.
For built-in code, it just prints the kernel image file name, like
"vmlinux". Examples:
(before patch:)
0x0000000d callback: 1928
0xffffffff81678c09 huft_build: 1560
0x0018 init_module: 1512
(after patch:)
0x0000000d callback [divacapi]: 1928
0xffffffff81678c09 huft_build [vmlinux]: 1560
0x0018 init_module [hdaps]: 1512
Also change one if-series to use elsif to cut down on unneeded tests.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make it executable like it should be. Do the same for other files intended to be
executed by the user - the ones called by the build process needn't be
executable as they already work (as argument to their interpreter).
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
