Commit Graph

1727 Commits

Author SHA1 Message Date
Egil Hjelmeland
054287295b net: Define eth_stp_addr in linux/etherdevice.h
The lan9303 driver defines eth_stp_addr as a synonym to
eth_reserved_addr_base to get the STP ethernet address 01:80:c2:00:00:00.

eth_reserved_addr_base is also used to define the start of Bridge Reserved
ethernet address range, which happen to be the STP address.

br_dev_setup refer to eth_reserved_addr_base as a definition of STP
address.

Clean up by:
 - Move the eth_stp_addr definition to linux/etherdevice.h
 - Use eth_stp_addr instead of eth_reserved_addr_base in br_dev_setup.

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03 14:17:39 +09:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Nikolay Aleksandrov
9289906313 net: bridge: add notifications for the bridge dev on vlan change
Currently the bridge device doesn't generate any notifications upon vlan
modifications on itself because it doesn't use the generic bridge
notifications.
With the recent changes we know if anything was modified in the vlan config
thus we can generate a notification when necessary for the bridge device
so add support to br_ifinfo_notify() similar to how other combined
functions are done - if port is present it takes precedence, otherwise
notify about the bridge. I've explicitly marked the locations where the
notification should be always for the port by setting bridge to NULL.
I've also taken the liberty to rearrange each modified function's local
variables in reverse xmas tree as well.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02 15:53:40 +09:00
Nikolay Aleksandrov
1a3fbd3fde net: bridge: add neigh_suppress to bridge port policies
Add an entry for IFLA_BRPORT_NEIGH_SUPPRESS to bridge port policies.

Fixes: 821f1b21ca ("bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01 12:32:45 +09:00
Nikolay Aleksandrov
f418af6343 bridge: vlan: signal if anything changed on vlan add
Before this patch there was no way to tell if the vlan add operation
actually changed anything, thus we would always generate a notification
on adds. Let's make the notifications more precise and generate them
only if anything changed, so use the new bool parameter to signal that the
vlan was updated. We cannot return an error because there are valid use
cases that will be broken (e.g. overlapping range add) and also we can't
risk masking errors due to calls into drivers for vlan add which can
potentially return anything.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 11:03:43 +09:00
Nikolay Aleksandrov
e19b42a1a0 bridge: netlink: make setlink/dellink notifications more accurate
Before this patch we had cases that either sent notifications when there
were in fact no changes (e.g. non-existent vlan delete) or didn't send
notifications when there were changes (e.g. vlan add range with an error in
the middle, port flags change + vlan update error). This patch sends down
a boolean to the functions setlink/dellink use and if there is even a
single configuration change (port flag, vlan add/del, port state) then
we always send a notification. This is all done to keep backwards
compatibility with the opportunistic vlan delete, where one could
specify a vlan range that has missing vlans inside and still everything
in that range will be cleared, this is mostly used to clear the whole
vlan config with a single call, i.e. range 1-4094.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 11:03:43 +09:00
Xin Long
fbb85b3c01 bridge: remove rtmsg_ifinfo called in add_del_if
Since commit dc709f3757 ("rtnetlink: bring NETDEV_CHANGEUPPER event
process back in rtnetlink_event"), rtnetlink_event would process the
NETDEV_CHANGEUPPER event and send a notification to userspace.

In add_del_if, it would generate NETDEV_CHANGEUPPER event by whether
netdev_master_upper_dev_link or netdev_upper_dev_unlink. There's
no need to call rtmsg_ifinfo to send the notification any more.

So this patch is to remove it from add_del_if also to avoid redundant
notifications.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25 10:54:39 +09:00
David S. Miller
f8ddadc4db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
There were quite a few overlapping sets of changes here.

Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.

Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly.  If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.

In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().

Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.

The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 13:39:14 +01:00
Nikolay Aleksandrov
66c5451754 net: bridge: fix returning of vlan range op errors
When vlan tunnels were introduced, vlan range errors got silently
dropped and instead 0 was returned always. Restore the previous
behaviour and return errors to user-space.

Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22 01:46:32 +01:00
David S. Miller
d93fa2ba64 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-10-09 20:11:09 -07:00
Yotam Gigi
0912bda436 net: bridge: Export bridge multicast router state
Add an access function that, given a bridge netdevice, returns whether the
bridge device is currently an mrouter or not. The function uses the already
existing br_multicast_is_router function to check that.

This function is needed in order to allow ports that join an already
existing bridge to know the current mrouter state of the bridge device.
Together with the bridge device mrouter ports switchdev notifications, it
is possible to have full offloading of the semantics of the bridge device
mcast router state.

Due to the fact that the bridge multicast router status can change in
packet RX path, take the multicast_router bridge spinlock to protect the
read.

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09 10:18:11 -07:00
Yotam Gigi
7704142075 net: bridge: Notify on bridge device mrouter state changes
Add the SWITCHDEV_ATTR_ID_BRIDGE_MROUTER switchdev notification type, used
to indicate whether the bridge is or isn't mrouter. Notify when the bridge
changes its state, similarly to the already existing bridged port mrouter
notifications.

The notification uses the switchdev_attr.u.mrouter boolean flag to indicate
the current bridge mrouter status. Thus, it only indicates whether the
bridge is currently used as an mrouter or not, and does not indicate the
exact mrouter state of the bridge (learning, permanent, etc.).

Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09 10:18:11 -07:00
Roopa Prabhu
ed842faeb2 bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports
This patch avoids flooding and proxies ndisc packets
for BR_NEIGH_SUPPRESS ports.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 21:12:04 -07:00
Roopa Prabhu
057658cb33 bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports
This patch avoids flooding and proxies arp packets
for BR_NEIGH_SUPPRESS ports.

Moves existing br_do_proxy_arp to br_do_proxy_suppress_arp
to support both proxy arp and neigh suppress.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 21:12:04 -07:00
Roopa Prabhu
821f1b21ca bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood
This patch adds a new bridge port flag BR_NEIGH_SUPPRESS to
suppress arp and nd flood on bridge ports. It implements
rfc7432, section 10.
https://tools.ietf.org/html/rfc7432#section-10
for ethernet VPN deployments. It is similar to the existing
BR_PROXYARP* flags but has a few semantic differences to conform
to EVPN standard. Unlike the existing flags, this new flag suppresses
flood of all neigh discovery packets (arp and nd) to tunnel ports.
Supports both vlan filtering and non-vlan filtering bridges.

In case of EVPN, it is mainly used to avoid flooding
of arp and nd packets to tunnel ports like vxlan.

This patch adds netlink and sysfs support to set this bridge port
flag.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 21:12:04 -07:00
David Ahern
ca752be006 net: bridge: Pass extack to down to netdev_master_upper_dev_link
Pass extack arg to br_add_if. Add messages for a couple of failures
and pass arg to netdev_master_upper_dev_link.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 21:39:34 -07:00
David Ahern
42ab19ee90 net: Add extack to upper device linking
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 21:39:33 -07:00
David Ahern
33eaf2a6eb net: Add extack to ndo_add_slave
Pass extack to do_set_master and down to ndo_add_slave

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 21:39:33 -07:00
Artem Savkov
e6b72ee88a netfilter: ebtables: fix race condition in frame_filter_net_init()
It is possible for ebt_in_hook to be triggered before ebt_table is assigned
resulting in a NULL-pointer dereference. Make sure hooks are
registered as the last step.

Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-29 13:36:06 +02:00
Nikolay Aleksandrov
5af48b59f3 net: bridge: add per-port group_fwd_mask with less restrictions
We need to be able to transparently forward most link-local frames via
tunnels (e.g. vxlan, qinq). Currently the bridge's group_fwd_mask has a
mask which restricts the forwarding of STP and LACP, but we need to be able
to forward these over tunnels and control that forwarding on a per-port
basis thus add a new per-port group_fwd_mask option which only disallows
mac pause frames to be forwarded (they're always dropped anyway).
The patch does not change the current default situation - all of the others
are still restricted unless configured for forwarding.
We have successfully tested this patch with LACP and STP forwarding over
VxLAN and qinq tunnels.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-29 06:02:55 +01:00
Vincent Bernat
8701352b22 bridge: trigger RTM_NEWLINK when interface is modified by bridge ioctl
Currently, there is a difference in netlink events received when an
interface is modified through bridge ioctl() or through netlink. This
patch generates additional events when an interface is added to or
removed from a bridge via ioctl().

When adding then removing an interface from a bridge with netlink, we
get:

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

When using ioctl():

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

Without this patch, the last netlink notification is not sent.

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21 15:45:12 -07:00
David S. Miller
eccaa9e51b Revert "bridge: also trigger RTM_NEWLINK when interface is released from bridge"
This reverts commit 00ba4cb36d.

Discussion with David Ahern determined that this change is
actually not needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 15:39:59 -07:00
Vincent Bernat
00ba4cb36d bridge: also trigger RTM_NEWLINK when interface is released from bridge
Currently, when an interface is released from a bridge via
ioctl(), we get a RTM_DELLINK event through netlink:

Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 6e:23:c2:54:3a:b3

Userspace has to interpret that as a removal from the bridge, not as a
complete removal of the interface. When an bridged interface is
completely removed, we get two events:

Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 master bridge0 state DOWN
    link/ether 6e:23:c2:54:3a:b3
Deleted 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
    link/ether 6e:23:c2:54:3a:b3 brd ff:ff:ff:ff:ff:ff

In constrast, when an interface is released from a bond, we get a
RTM_NEWLINK with only the new characteristics (no master):

3: dummy1: <BROADCAST,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff
3: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noqueue state DOWN group default
    link/ether ca:c8:7b:66:f8:25 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
    link/ether ae:dc:7a:8c:9a:3c brd ff:ff:ff:ff:ff:ff

Userland may be confused by the fact we say a link is deleted while
its characteristics are only modified. A first solution would have
been to turn the RTM_DELLINK event in del_nbp() into a RTM_NEWLINK
event. However, maybe some piece of userland is relying on this
RTM_DELLINK to detect when a bridged interface is released. Instead,
we also emit a RTM_NEWLINK event once the interface is
released (without master info).

Deleted 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 8a:bb:e7:94:b1:f8
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 8a:bb:e7:94:b1:f8 brd ff:ff:ff:ff:ff:ff

This is done only when using ioctl(). When using Netlink, such an
event is already automatically emitted in do_setlink().

Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 14:07:40 -07:00
Ido Schimmel
f1c2eddf4c bridge: switchdev: Use an helper to clear forward mark
Instead of using ifdef in the C file.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05 11:51:47 -07:00
Varsha Rao
9efdb14f76 net: Remove CONFIG_NETFILTER_DEBUG and _ASSERT() macros.
This patch removes CONFIG_NETFILTER_DEBUG and _ASSERT() macros as they
are no longer required. Replace _ASSERT() macros with WARN_ON().

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-04 13:25:20 +02:00
David S. Miller
b63f6044d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. Basically, updates to the conntrack core, enhancements for
nf_tables, conversion of netfilter hooks from linked list to array to
improve memory locality and asorted improvements for the Netfilter
codebase. More specifically, they are:

1) Add expection to hashes after timer initialization to prevent
   access from another CPU that walks on the hashes and calls
   del_timer(), from Florian Westphal.

2) Don't update nf_tables chain counters from hot path, this is only
   used by the x_tables compatibility layer.

3) Get rid of nested rcu_read_lock() calls from netfilter hook path.
   Hooks are always guaranteed to run from rcu read side, so remove
   nested rcu_read_lock() where possible. Patch from Taehee Yoo.

4) nf_tables new ruleset generation notifications include PID and name
   of the process that has updated the ruleset, from Phil Sutter.

5) Use skb_header_pointer() from nft_fib, so we can reuse this code from
   the nf_family netdev family. Patch from Pablo M. Bermudo.

6) Add support for nft_fib in nf_tables netdev family, also from Pablo.

7) Use deferrable workqueue for conntrack garbage collection, to reduce
   power consumption, from Patch from Subash Abhinov Kasiviswanathan.

8) Add nf_ct_expect_iterate_net() helper and use it. From Florian
   Westphal.

9) Call nf_ct_unconfirmed_destroy only from cttimeout, from Florian.

10) Drop references on conntrack removal path when skbuffs has escaped via
    nfqueue, from Florian.

11) Don't queue packets to nfqueue with dying conntrack, from Florian.

12) Constify nf_hook_ops structure, from Florian.

13) Remove neededlessly branch in nf_tables trace code, from Phil Sutter.

14) Add nla_strdup(), from Phil Sutter.

15) Rise nf_tables objects name size up to 255 chars, people want to use
    DNS names, so increase this according to what RFC 1035 specifies.
    Patch series from Phil Sutter.

16) Kill nf_conntrack_default_on, it's broken. Default on conntrack hook
    registration on demand, suggested by Eric Dumazet, patch from Florian.

17) Remove unused variables in compat_copy_entry_from_user both in
    ip_tables and arp_tables code. Patch from Taehee Yoo.

18) Constify struct nf_conntrack_l4proto, from Julia Lawall.

19) Constify nf_loginfo structure, also from Julia.

20) Use a single rb root in connlimit, from Taehee Yoo.

21) Remove unused netfilter_queue_init() prototype, from Taehee Yoo.

22) Use audit_log() instead of open-coding it, from Geliang Tang.

23) Allow to mangle tcp options via nft_exthdr, from Florian.

24) Allow to fetch TCP MSS from nft_rt, from Florian. This includes
    a fix for a miscalculation of the minimal length.

25) Simplify branch logic in h323 helper, from Nick Desaulniers.

26) Calculate netlink attribute size for conntrack tuple at compile
    time, from Florian.

27) Remove protocol name field from nf_conntrack_{l3,l4}proto structure.
    From Florian.

28) Remove holes in nf_conntrack_l4proto structure, so it becomes
    smaller. From Florian.

29) Get rid of print_tuple() indirection for /proc conntrack listing.
    Place all the code in net/netfilter/nf_conntrack_standalone.c.
    Patch from Florian.

30) Do not built in print_conntrack() if CONFIG_NF_CONNTRACK_PROCFS is
    off. From Florian.

31) Constify most nf_conntrack_{l3,l4}proto helper functions, from
    Florian.

32) Fix broken indentation in ebtables extensions, from Colin Ian King.

33) Fix several harmless sparse warning, from Florian.

34) Convert netfilter hook infrastructure to use array for better memory
    locality, joint work done by Florian and Aaron Conole. Moreover, add
    some instrumentation to debug this.

35) Batch nf_unregister_net_hooks() calls, to call synchronize_net once
    per batch, from Florian.

36) Get rid of noisy logging in ICMPv6 conntrack helper, from Florian.

37) Get rid of obsolete NFDEBUG() instrumentation, from Varsha Rao.

38) Remove unused code in the generic protocol tracker, from Davide
    Caratti.

I think I will have material for a second Netfilter batch in my queue if
time allow to make it fit in this merge window.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03 17:08:42 -07:00
David S. Miller
6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Ido Schimmel
79e99bdd60 bridge: switchdev: Clear forward mark when transmitting packet
Commit 6bc506b4fb ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.

In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.

However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.

This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.

Fixes: 6bc506b4fb ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 10:11:28 -07:00
Roopa Prabhu
e3cfddd577 bridge: add tracepoint in br_fdb_update
This extends bridge fdb table tracepoints to also cover
learned fdb entries in the br_fdb_update path. Note that
unlike other tracepoints I have moved this to when the fdb
is modified because this is in the datapath and can generate
a lot of noise in the trace output. br_fdb_update is also called
from added_by_user context in the NTF_USE case which is already
traced ..hence the !added_by_user check.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31 11:42:41 -07:00
Roopa Prabhu
b74fd306ef bridge: fdb add and delete tracepoints
A few useful tracepoints to trace bridge forwarding
database updates.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29 14:49:45 -07:00
Roopa Prabhu
ef9a5a62c6 bridge: check for null fdb->dst before notifying switchdev drivers
current switchdev drivers dont seem to support offloading fdb
entries pointing to the bridge device which have fdb->dst
not set to any port. This patch adds a NULL fdb->dst check in
the switchdev notifier code.

This patch fixes the below NULL ptr dereference:
$bridge fdb add 00:02:00:00:00:33 dev br0 self

[   69.953374] BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
[   69.954044] IP: br_switchdev_fdb_notify+0x29/0x80
[   69.954044] PGD 66527067
[   69.954044] P4D 66527067
[   69.954044] PUD 7899c067
[   69.954044] PMD 0
[   69.954044]
[   69.954044] Oops: 0000 [#1] SMP
[   69.954044] Modules linked in:
[   69.954044] CPU: 1 PID: 3074 Comm: bridge Not tainted 4.13.0-rc6+ #1
[   69.954044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org
04/01/2014
[   69.954044] task: ffff88007b827140 task.stack: ffffc90001564000
[   69.954044] RIP: 0010:br_switchdev_fdb_notify+0x29/0x80
[   69.954044] RSP: 0018:ffffc90001567918 EFLAGS: 00010246
[   69.954044] RAX: 0000000000000000 RBX: ffff8800795e0880 RCX:
00000000000000c0
[   69.954044] RDX: ffffc90001567920 RSI: 000000000000001c RDI:
ffff8800795d0600
[   69.954044] RBP: ffffc90001567938 R08: ffff8800795d0600 R09:
0000000000000000
[   69.954044] R10: ffffc90001567a88 R11: ffff88007b849400 R12:
ffff8800795e0880
[   69.954044] R13: ffff8800795d0600 R14: ffffffff81ef8880 R15:
000000000000001c
[   69.954044] FS:  00007f93d3085700(0000) GS:ffff88007fd00000(0000)
knlGS:0000000000000000
[   69.954044] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   69.954044] CR2: 0000000000000008 CR3: 0000000066551000 CR4:
00000000000006e0
[   69.954044] Call Trace:
[   69.954044]  fdb_notify+0x3f/0xf0
[   69.954044]  __br_fdb_add.isra.12+0x1a7/0x370
[   69.954044]  br_fdb_add+0x178/0x280
[   69.954044]  rtnl_fdb_add+0x10a/0x200
[   69.954044]  rtnetlink_rcv_msg+0x1b4/0x240
[   69.954044]  ? skb_free_head+0x21/0x40
[   69.954044]  ? rtnl_calcit.isra.18+0xf0/0xf0
[   69.954044]  netlink_rcv_skb+0xed/0x120
[   69.954044]  rtnetlink_rcv+0x15/0x20
[   69.954044]  netlink_unicast+0x180/0x200
[   69.954044]  netlink_sendmsg+0x291/0x370
[   69.954044]  ___sys_sendmsg+0x180/0x2e0
[   69.954044]  ? filemap_map_pages+0x2db/0x370
[   69.954044]  ? do_wp_page+0x11d/0x420
[   69.954044]  ? __handle_mm_fault+0x794/0xd80
[   69.954044]  ? vma_link+0xcb/0xd0
[   69.954044]  __sys_sendmsg+0x4c/0x90
[   69.954044]  SyS_sendmsg+0x12/0x20
[   69.954044]  do_syscall_64+0x63/0xe0
[   69.954044]  entry_SYSCALL64_slow_path+0x25/0x25
[   69.954044] RIP: 0033:0x7f93d2bad690
[   69.954044] RSP: 002b:00007ffc7217a638 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[   69.954044] RAX: ffffffffffffffda RBX: 00007ffc72182eac RCX:
00007f93d2bad690
[   69.954044] RDX: 0000000000000000 RSI: 00007ffc7217a670 RDI:
0000000000000003
[   69.954044] RBP: 0000000059a1f7f8 R08: 0000000000000006 R09:
000000000000000a
[   69.954044] R10: 00007ffc7217a400 R11: 0000000000000246 R12:
00007ffc7217a670
[   69.954044] R13: 00007ffc72182a98 R14: 00000000006114c0 R15:
00007ffc72182aa0
[   69.954044] Code: 1f 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 f6 47
20 04 74 0a 83 fe 1c 74 09 83 fe 1d 74 2c c9 66 90 c3 48 8b 47 10 48 8d
55 e8 <48> 8b 70 08 0f b7 47 1e 48 83 c7 18 48 89 7d f0 bf 03 00 00 00
[   69.954044] RIP: br_switchdev_fdb_notify+0x29/0x80 RSP:
ffffc90001567918
[   69.954044] CR2: 0000000000000008
[   69.954044] ---[ end trace 03e9eec4a82c238b ]---

Fixes: 6b26b51b1d ("net: bridge: Add support for notifying devices about FDB add/del")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:14:00 -07:00
Bhumika Goyal
eb73ddebe9 bridge: make ebt_table const
Make this const as it is only passed to a const argument of the function
ebt_register_table.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 11:30:02 -07:00
Aaron Conole
960632ece6 netfilter: convert hook list to an array
This converts the storage and layout of netfilter hook entries from a
linked list to an array.  After this commit, hook entries will be
stored adjacent in memory.  The next pointer is no longer required.

The ops pointers are stored at the end of the array as they are only
used in the register/unregister path and in the legacy br_netfilter code.

nf_unregister_net_hooks() is slower than needed as it just calls
nf_unregister_net_hook in a loop (i.e. at least n synchronize_net()
calls), this will be addressed in followup patch.

Test setup:
 - ixgbe 10gbit
 - netperf UDP_STREAM, 64 byte packets
 - 5 hooks: (raw + mangle prerouting, mangle+filter input, inet filter):
empty mangle and raw prerouting, mangle and filter input hooks:
353.9
this patch:
364.2

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-08-28 17:44:00 +02:00
Colin Ian King
c816c2558e netfilter: ebtables: fix indent on if statements
The returns on some if statements are not indented correctly,
add in the missing tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-08-24 18:56:17 +02:00
Geliang Tang
46b20c38f3 netfilter: use audit_log()
Use audit_log() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-08-19 13:09:31 +02:00
Florian Westphal
b97bac64a5 rtnetlink: make rtnl_register accept a flags parameter
This change allows us to later indicate to rtnetlink core that certain
doit functions should be called without acquiring rtnl_mutex.

This change should have no effect, we simply replace the last (now
unused) calcit argument with the new flag.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 16:57:38 -07:00
Arkadi Sharshevsky
3a83c2a7a5 net: bridge: Remove FDB deletion through switchdev object
At this point no driver supports FDB add/del through switchdev object
but rather via notification chain, thus, it is removed.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 14:48:48 -07:00
Florian Westphal
591bb2789b netfilter: nf_hook_ops structs can be const
We no longer place these on a list so they can be const.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-07-31 19:10:44 +02:00
Nikolay Aleksandrov
31a4562d74 net: bridge: fix dest lookup when vlan proto doesn't match
With 802.1ad support the vlan_ingress code started checking for vlan
protocol mismatch which causes the current tag to be inserted and the
bridge vlan protocol & pvid to be set. The vlan tag insertion changes
the skb mac_header and thus the lookup mac dest pointer which was loaded
prior to calling br_allowed_ingress in br_handle_frame_finish is VLAN_HLEN
bytes off now, pointing to the last two bytes of the destination mac and
the first four of the source mac causing lookups to always fail and
broadcasting all such packets to all ports. Same thing happens for locally
originated packets when passing via br_dev_xmit. So load the dest pointer
after the vlan checks and possible skb change.

Fixes: 8580e2117c ("bridge: Prepare for 802.1ad vlan filtering support")
Reported-by: Anitha Narasimha Murthy <anitha@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-14 08:19:23 -07:00
Eduardo Valentin
1bfb159673 bridge: mdb: fix leak on complete_info ptr on fail path
We currently get the following kmemleak report:
unreferenced object 0xffff8800039d9820 (size 32):
  comm "softirq", pid 0, jiffies 4295212383 (age 792.416s)
  hex dump (first 32 bytes):
    00 0c e0 03 00 88 ff ff ff 02 00 00 00 00 00 00  ................
    00 00 00 01 ff 11 00 02 86 dd 00 00 ff ff ff ff  ................
  backtrace:
    [<ffffffff8152b4aa>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff811d8ec8>] kmem_cache_alloc_trace+0xb8/0x1c0
    [<ffffffffa0389683>] __br_mdb_notify+0x2a3/0x300 [bridge]
    [<ffffffffa038a0ce>] br_mdb_notify+0x6e/0x70 [bridge]
    [<ffffffffa0386479>] br_multicast_add_group+0x109/0x150 [bridge]
    [<ffffffffa0386518>] br_ip6_multicast_add_group+0x58/0x60 [bridge]
    [<ffffffffa0387fb5>] br_multicast_rcv+0x1d5/0xdb0 [bridge]
    [<ffffffffa037d7cf>] br_handle_frame_finish+0xcf/0x510 [bridge]
    [<ffffffffa03a236b>] br_nf_hook_thresh.part.27+0xb/0x10 [br_netfilter]
    [<ffffffffa03a3738>] br_nf_hook_thresh+0x48/0xb0 [br_netfilter]
    [<ffffffffa03a3fb9>] br_nf_pre_routing_finish_ipv6+0x109/0x1d0 [br_netfilter]
    [<ffffffffa03a4400>] br_nf_pre_routing_ipv6+0xd0/0x14c [br_netfilter]
    [<ffffffffa03a3c27>] br_nf_pre_routing+0x197/0x3d0 [br_netfilter]
    [<ffffffff814a2952>] nf_iterate+0x52/0x60
    [<ffffffff814a29bc>] nf_hook_slow+0x5c/0xb0
    [<ffffffffa037ddf4>] br_handle_frame+0x1a4/0x2c0 [bridge]

This happens when switchdev_port_obj_add() fails. This patch
frees complete_info object in the fail path.

Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com>
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11 20:01:39 -07:00
David S. Miller
c644bd79c0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains two Netfilter fixes for your net tree,
they are:

1) Fix memleak from netns release path of conntrack protocol trackers,
   patch from Liping Zhang.

2) Uninitialized flags field in ebt_log, that results in unpredictable
   logging format in ebtables, also from Liping.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-06 14:02:22 +01:00
Reshetova, Elena
2512775985 net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04 22:35:16 +01:00
Nikolay Aleksandrov
7597b266c5 bridge: allow ext learned entries to change ports
current code silently ignores change of port in the request
message. This patch makes sure the port is modified and
notification is sent to userspace.

Fixes: cf6b8e1eed ("bridge: add API to notify bridge driver of learned FBD on offloaded device")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04 01:49:44 -07:00
Reshetova, Elena
53869cebce net: convert nf_bridge_info.use from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:07 -07:00
David S. Miller
52a623bd61 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. This batch contains connection tracking updates for the cleanup
iteration path, patches from Florian Westphal:

X) Skip unconfirmed conntracks in nf_ct_iterate_cleanup_net(), just set
   dying bit to let the CPU release them.

X) Add nf_ct_iterate_destroy() to be used on module removal, to kill
   conntrack from all namespace.

X) Restart iteration on hashtable resizing, since both may occur at
   the same time.

X) Use the new nf_ct_iterate_destroy() to remove conntrack with NAT
   mapping on module removal.

X) Use nf_ct_iterate_destroy() to remove conntrack entries helper
   module removal, from Liping Zhang.

X) Use nf_ct_iterate_cleanup_net() to remove the timeout extension
   if user requests this, also from Liping.

X) Add net_ns_barrier() and use it from FTP helper, so make sure
   no concurrent namespace removal happens at the same time while
   the helper module is being removed.

X) Use NFPROTO_MAX in layer 3 conntrack protocol array, to reduce
   module size. Same thing in nf_tables.

Updates for the nf_tables infrastructure:

X) Prepare usage of the extended ACK reporting infrastructure for
   nf_tables.

X) Remove unnecessary forward declaration in nf_tables hash set.

X) Skip set size estimation if number of element is not specified.

X) Changes to accomodate a (faster) unresizable hash set implementation,
   for anonymous sets and dynamic size fixed sets with no timeouts.

X) Faster lookup function for unresizable hash table for 2 and 4
   bytes key.

And, finally, a bunch of asorted small updates and cleanups:

X) Do not hold reference to netdev from ipt_CLUSTER, instead subscribe
   to device events and look up for index from the packet path, this
   is fixing an issue that is present since the very beginning, patch
   from Xin Long.

X) Use nf_register_net_hook() in ipt_CLUSTER, from Florian Westphal.

X) Use ebt_invalid_target() whenever possible in the ebtables tree,
   from Gao Feng.

X) Calm down compilation warning in nf_dup infrastructure, patch from
   stephen hemminger.

X) Statify functions in nftables rt expression, also from stephen.

X) Update Makefile to use canonical method to specify nf_tables-objs.
   From Jike Song.

X) Use nf_conntrack_helpers_register() in amanda and H323.

X) Space cleanup for ctnetlink, from linzhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 06:27:09 -07:00
Arvind Yadav
cddbb79f7a net: bridge: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2645	    896	      0	   3541	    dd5	net/bridge/br_sysfs_br.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2701	    832	      0	   3533	    dcd	net/bridge/br_sysfs_br.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29 15:48:52 -04:00
Liping Zhang
91af6ba7ff netfilter: ebt_nflog: fix unexpected truncated packet
"struct nf_loginfo li;" is a local variable, so we should set the flags
to 0 explicitly, else, packets maybe truncated unexpectedly when copied
to the userspace.

Fixes: 7643507fe8 ("netfilter: xt_NFLOG: nflog-range does not truncate packets")
Cc: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-06-29 18:47:02 +02:00
Matthias Schiffer
17dd0ec470 net: add netlink_ext_ack argument to rtnl_link_ops.slave_changelink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer
a8b8a889e3 net: add netlink_ext_ack argument to rtnl_link_ops.validate
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer
ad744b223c net: add netlink_ext_ack argument to rtnl_link_ops.changelink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:22 -04:00
Matthias Schiffer
7a3f4a1851 net: add netlink_ext_ack argument to rtnl_link_ops.newlink
Add support for extended error reporting.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 23:13:21 -04:00
yuan linyu
b952f4dff2 net: manual clean code which call skb_put_[data:zero]
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20 13:30:15 -04:00
yuan linyu
de77b966ce net: introduce __skb_put_[zero, data, u8]
follow Johannes Berg, semantic patch file as below,
@@
identifier p, p2;
expression len;
expression skb;
type t, t2;
@@
(
-p = __skb_put(skb, len);
+p = __skb_put_zero(skb, len);
|
-p = (t)__skb_put(skb, len);
+p = __skb_put_zero(skb, len);
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, len);
|
-memset(p, 0, len);
)

@@
identifier p;
expression len;
expression skb;
type t;
@@
(
-t p = __skb_put(skb, len);
+t p = __skb_put_zero(skb, len);
)
... when != p
(
-memset(p, 0, len);
)

@@
type t, t2;
identifier p, p2;
expression skb;
@@
t *p;
...
(
-p = __skb_put(skb, sizeof(t));
+p = __skb_put_zero(skb, sizeof(t));
|
-p = (t *)__skb_put(skb, sizeof(t));
+p = __skb_put_zero(skb, sizeof(t));
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, sizeof(*p));
|
-memset(p, 0, sizeof(*p));
)

@@
expression skb, len;
@@
-memset(__skb_put(skb, len), 0, len);
+__skb_put_zero(skb, len);

@@
expression skb, len, data;
@@
-memcpy(__skb_put(skb, len), data, len);
+__skb_put_data(skb, data, len);

@@
expression SKB, C, S;
typedef u8;
identifier fn = {__skb_put};
fresh identifier fn2 = fn ## "_u8";
@@
- *(u8 *)fn(SKB, S) = C;
+ fn2(SKB, C);

Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20 13:30:14 -04:00
Gao Feng
e15b9c50c4 netfilter: ebt: Use new helper ebt_invalid_target to check target
Use the new helper function ebt_invalid_target instead of the old
macro INVALID_TARGET and other duplicated codes to enhance the readability.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-06-19 19:09:19 +02:00
Johannes Berg
d58ff35122 networking: make skb_push & __skb_push return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

    @@
    expression SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - fn(SKB, LEN)[0]
    + *(u8 *)fn(SKB, LEN)

Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:40 -04:00
Johannes Berg
59ae1d127a networking: introduce and use skb_put_data()
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.

An spatch similar to the one for skb_put_zero() converts many
of the places using it:

    @@
    identifier p, p2;
    expression len, skb, data;
    type t, t2;
    @@
    (
    -p = skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    |
    -p = (t)skb_put(skb, len);
    +p = skb_put_data(skb, data, len);
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, len);
    |
    -memcpy(p, data, len);
    )

    @@
    type t, t2;
    identifier p, p2;
    expression skb, data;
    @@
    t *p;
    ...
    (
    -p = skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    |
    -p = (t *)skb_put(skb, sizeof(t));
    +p = skb_put_data(skb, data, sizeof(t));
    )
    (
    p2 = (t2)p;
    -memcpy(p2, data, sizeof(*p));
    |
    -memcpy(p, data, sizeof(*p));
    )

    @@
    expression skb, len, data;
    @@
    -memcpy(skb_put(skb, len), data, len);
    +skb_put_data(skb, data, len);

(again, manually post-processed to retain some comments)

Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:37 -04:00
Johannes Berg
b080db5853 networking: convert many more places to skb_put_zero()
There were many places that my previous spatch didn't find,
as pointed out by yuan linyu in various patches.

The following spatch found many more and also removes the
now unnecessary casts:

    @@
    identifier p, p2;
    expression len;
    expression skb;
    type t, t2;
    @@
    (
    -p = skb_put(skb, len);
    +p = skb_put_zero(skb, len);
    |
    -p = (t)skb_put(skb, len);
    +p = skb_put_zero(skb, len);
    )
    ... when != p
    (
    p2 = (t2)p;
    -memset(p2, 0, len);
    |
    -memset(p, 0, len);
    )

    @@
    type t, t2;
    identifier p, p2;
    expression skb;
    @@
    t *p;
    ...
    (
    -p = skb_put(skb, sizeof(t));
    +p = skb_put_zero(skb, sizeof(t));
    |
    -p = (t *)skb_put(skb, sizeof(t));
    +p = skb_put_zero(skb, sizeof(t));
    )
    ... when != p
    (
    p2 = (t2)p;
    -memset(p2, 0, sizeof(*p));
    |
    -memset(p, 0, sizeof(*p));
    )

    @@
    expression skb, len;
    @@
    -memset(skb_put(skb, len), 0, len);
    +skb_put_zero(skb, len);

Apply it to the tree (with one manual fixup to keep the
comment in vxlan.c, which spatch removed.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:35 -04:00
David S. Miller
0ddead90b2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The conflicts were two cases of overlapping changes in
batman-adv and the qed driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15 11:59:32 -04:00
Arkadi Sharshevsky
9fe8bcec0d net: bridge: Receive notification about successful FDB offload
When a new static FDB is added to the bridge a notification is sent to
the driver for offload. In case of successful offload the driver should
notify the bridge back, which in turn should mark the FDB as offloaded.

Currently, externally learned is equivalent for being offloaded which is
not correct due to the fact that FDBs which are added from user-space are
also marked as externally learned. In order to specify if an FDB was
successfully offloaded a new flag is introduced.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 14:16:25 -04:00
Arkadi Sharshevsky
6b26b51b1d net: bridge: Add support for notifying devices about FDB add/del
Currently the bridge doesn't notify the underlying devices about new
FDBs learned. The FDB sync is placed on the switchdev notifier chain
because devices may potentially learn FDB that are not directly related
to their ports, for example:

1. Mixed SW/HW bridge - FDBs that point to the ASICs external devices
                        should be offloaded as CPU traps in order to
			perform forwarding in slow path.
2. EVPN - Externally learned FDBs for the vtep device.

Notification is sent only about static FDB add/del. This is done due
to fact that currently this is the only scenario supported by switch
drivers.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 14:16:25 -04:00
Arkadi Sharshevsky
0baa10fff2 net: bridge: Add support for calling FDB external learning under rcu
This is done as a preparation to moving the switchdev notifier chain
to be atomic. The FDB external learning should be called under rtnl
or rcu.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 14:16:24 -04:00
Arkadi Sharshevsky
3922285d96 net: bridge: Add support for offloading port attributes
Currently the flood, learning and learning_sync port attributes are
offloaded by setting the SELF flag. Add support for offloading the
flood and learning attribute through the bridge code. In case of
setting an unsupported flag on a offloded port the operation will
fail.

The learning_sync attribute doesn't have any software representation
and cannot be offloaded through the bridge code.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 14:16:24 -04:00
David S. Miller
cf124db566 net: Fix inconsistent teardown and release of private netdev state.
Network devices can allocate reasources and private memory using
netdev_ops->ndo_init().  However, the release of these resources
can occur in one of two different places.

Either netdev_ops->ndo_uninit() or netdev->destructor().

The decision of which operation frees the resources depends upon
whether it is necessary for all netdev refs to be released before it
is safe to perform the freeing.

netdev_ops->ndo_uninit() presumably can occur right after the
NETDEV_UNREGISTER notifier completes and the unicast and multicast
address lists are flushed.

netdev->destructor(), on the other hand, does not run until the
netdev references all go away.

Further complicating the situation is that netdev->destructor()
almost universally does also a free_netdev().

This creates a problem for the logic in register_netdevice().
Because all callers of register_netdevice() manage the freeing
of the netdev, and invoke free_netdev(dev) if register_netdevice()
fails.

If netdev_ops->ndo_init() succeeds, but something else fails inside
of register_netdevice(), it does call ndo_ops->ndo_uninit().  But
it is not able to invoke netdev->destructor().

This is because netdev->destructor() will do a free_netdev() and
then the caller of register_netdevice() will do the same.

However, this means that the resources that would normally be released
by netdev->destructor() will not be.

Over the years drivers have added local hacks to deal with this, by
invoking their destructor parts by hand when register_netdevice()
fails.

Many drivers do not try to deal with this, and instead we have leaks.

Let's close this hole by formalizing the distinction between what
private things need to be freed up by netdev->destructor() and whether
the driver needs unregister_netdevice() to perform the free_netdev().

netdev->priv_destructor() performs all actions to free up the private
resources that used to be freed by netdev->destructor(), except for
free_netdev().

netdev->needs_free_netdev is a boolean that indicates whether
free_netdev() should be done at the end of unregister_netdevice().

Now, register_netdevice() can sanely release all resources after
ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit()
and netdev->priv_destructor().

And at the end of unregister_netdevice(), we invoke
netdev->priv_destructor() and optionally call free_netdev().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07 15:53:24 -04:00
David S. Miller
216fe8f021 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just some simple overlapping changes in marvell PHY driver
and the DSA core code.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 22:20:08 -04:00
Nikolay Aleksandrov
1020ce3108 net: bridge: fix a null pointer dereference in br_afspec
We might call br_afspec() with p == NULL which is a valid use case if
the action is on the bridge device itself, but the bridge tunnel code
dereferences the p pointer without checking, so check if p is null
first.

Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06 16:05:31 -04:00
Nikolay Aleksandrov
aeb073241f net: bridge: start hello timer only if device is up
When the transition of NO_STP -> KERNEL_STP was fixed by always calling
mod_timer in br_stp_start, it introduced a new regression which causes
the timer to be armed even when the bridge is down, and since we stop
the timers in its ndo_stop() function, they never get disabled if the
device is destroyed before it's upped.

To reproduce:
$ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on;
ip l del br0; done;

CC: Xin Long <lucien.xin@gmail.com>
CC: Ivan Vecera <cera@cera.cz>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes: 6d18c732b9 ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01 12:28:31 -04:00
Ido Schimmel
9341b988e6 bridge: Export multicast enabled state
During enslavement to a bridge, after the CHANGEUPPER is sent, the
multicast enabled state of the bridge isn't propagated down to the
offloading driver unless it's changed.

This patch allows such drivers to query the multicast enabled state from
the bridge, so that they'll be able to correctly configure their flood
tables during port enslavement.

In case multicast is disabled, unregistered multicast packets can be
treated as broadcast and be flooded through all the bridge ports.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26 15:18:44 -04:00
Ido Schimmel
1f51445af3 bridge: Export VLAN filtering state
It's useful for drivers supporting bridge offload to be able to query
the bridge's VLAN filtering state.

Currently, upon enslavement to a bridge master, the offloading driver
will only learn about the bridge's VLAN filtering state after the bridge
device was already linked with its slave.

Being able to query the bridge's VLAN filtering state allows such
drivers to forbid enslavement in case resource couldn't be allocated for
a VLAN-aware bridge and also choose the correct initialization routine
for the enslaved port, which is dependent on the bridge type.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26 15:18:44 -04:00
David S. Miller
218b6a5b23 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-05-22 23:32:48 -04:00
Ivan Vecera
bd080488a6 bridge: fix hello and hold timers starting/stopping
Current bridge code incorrectly handles starting/stopping of hello and
hold timers during STP enable/disable.

1. Timers are stopped in br_stp_start() during NO_STP->USER_STP
   transition. The timers are already stopped in NO_STP state so
   this is confusing no-op.

2. During USER_STP->NO_STP transition the timers are started. This
   does not make sense and is confusion because the timer should not be
   active in NO_STP state.

Cc: davem@davemloft.net
Cc: sashok@cumulusnetworks.com
Cc: stephen@networkplumber.org
Cc: bridge@lists.linux-foundation.org
Cc: lucien.xin@gmail.com
Cc: nikolay@cumulusnetworks.com
Signed-off-by: Ivan Vecera <cera@cera.cz>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22 14:40:22 -04:00
Xin Long
6d18c732b9 bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
Since commit 76b91c32dd ("bridge: stp: when using userspace stp stop
kernel hello and hold timers"), bridge would not start hello_timer if
stp_enabled is not KERNEL_STP when br_dev_open.

The problem is even if users set stp_enabled with KERNEL_STP later,
the timer will still not be started. It causes that KERNEL_STP can
not really work. Users have to re-ifup the bridge to avoid this.

This patch is to fix it by starting br->hello_timer when enabling
KERNEL_STP in br_stp_start.

As an improvement, it's also to start hello_timer again only when
br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is
no reason to start the timer again when it's NO_STP.

Fixes: 76b91c32dd ("bridge: stp: when using userspace stp stop kernel hello and hold timers")
Reported-by: Haidong Li <haili@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21 13:33:28 -04:00
David S. Miller
23416e2304 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:

1) When using IPVS in direct-routing mode, normal traffic from the LVS
   host to a back-end server is sometimes incorrectly NATed on the way
   back into the LVS host. Patch to fix this from Julian Anastasov.

2) Calm down clang compilation warning in ctnetlink due to type
   mismatch, from Matthias Kaehlcke.

3) Do not re-setup NAT for conntracks that are already confirmed, this
   is fixing a problem that was introduced in the previous nf-next batch.
   Patch from Liping Zhang.

4) Do not allow conntrack helper removal from userspace cthelper
   infrastructure if already in used. This comes with an initial patch
   to introduce nf_conntrack_helper_put() that is required by this fix.
   From Liping Zhang.

5) Zero the pad when copying data to userspace, otherwise iptables fails
   to remove rules. This is a follow up on the patchset that sorts out
   the internal match/target structure pointer leak to userspace. Patch
   from the same author, Willem de Bruijn. This also comes with a build
   failure when CONFIG_COMPAT is not on, coming in the last patch of
   this series.

6) SYNPROXY crashes with conntrack entries that are created via
   ctnetlink, more specifically via conntrackd state sync. Patch from
   Eric Leblond.

7) RCU safe iteration on set element dumping in nf_tables, from
   Liping Zhang.

8) Missing sanitization of immediate date for the bitwise and cmp
   expressions in nf_tables.

9) Refcounting logic for chain and objects from set elements does not
   integrate into the nf_tables 2-phase commit protocol.

10) Missing sanitization of target verdict in ebtables arpreply target,
    from Gao Feng.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21 13:00:02 -04:00
Davide Caratti
219f1d7987 sk_buff: remove support for csum_bad in sk_buff
This bit was introduced with commit 5a21232983 ("net: Support for
csum_bad in skbuff") to reduce the stack workload when processing RX
packets carrying a wrong Internet Checksum. Up to now, only one driver and
GRO core are setting it.

Suggested-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 19:21:29 -04:00
Tobias Jungel
a285860211 bridge: netlink: check vlan_default_pvid range
Currently it is allowed to set the default pvid of a bridge to a value
above VLAN_VID_MASK (0xfff). This patch adds a check to br_validate and
returns -EINVAL in case the pvid is out of bounds.

Reproduce by calling:

[root@test ~]# ip l a type bridge
[root@test ~]# ip l a type dummy
[root@test ~]# ip l s bridge0 type bridge vlan_filtering 1
[root@test ~]# ip l s bridge0 type bridge vlan_default_pvid 9999
[root@test ~]# ip l s dummy0 master bridge0
[root@test ~]# bridge vlan
port	vlan ids
bridge0	 9999 PVID Egress Untagged

dummy0	 9999 PVID Egress Untagged

Fixes: 0f963b7592 ("bridge: netlink: add support for default_pvid")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18 10:15:00 -04:00
Gao Feng
c953d63548 ebtables: arpreply: Add the standard target sanity check
The info->target comes from userspace and it would be used directly.
So we need to add the sanity check to make sure it is a valid standard
target, although the ebtables tool has already checked it. Kernel needs
to validate anything coming from userspace.

If the target is set as an evil value, it would break the ebtables
and cause a panic. Because the non-standard target is treated as one
offset.

Now add one helper function ebt_invalid_target, and we would replace
the macro INVALID_TARGET later.

Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-16 10:24:27 +02:00
Willem de Bruijn
324318f024 netfilter: xtables: zero padding in data_to_user
When looking up an iptables rule, the iptables binary compares the
aligned match and target data (XT_ALIGN). In some cases this can
exceed the actual data size to include padding bytes.

Before commit f77bc5b23f ("iptables: use match, target and data
copy_to_user helpers") the malloc()ed bytes were overwritten by the
kernel with kzalloced contents, zeroing the padding and making the
comparison succeed. After this patch, the kernel copies and clears
only data, leaving the padding bytes undefined.

Extend the clear operation from data size to aligned data size to
include the padding bytes, if any.

Padding bytes can be observed in both match and target, and the bug
triggered, by issuing a rule with match icmp and target ACCEPT:

  iptables -t mangle -A INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT
  iptables -t mangle -D INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT

Fixes: f77bc5b23f ("iptables: use match, target and data copy_to_user helpers")
Reported-by: Paul Moore <pmoore@redhat.com>
Reported-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-15 12:51:38 +02:00
Tobias Klauser
9051247dcf bridge: netlink: account for IFLA_BRPORT_{B, M}CAST_FLOOD size and policy
The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and
IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size()
when they were added. Do so now and also add the corresponding policy
entries:

Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Mike Manning <mmanning@brocade.com>
Fixes: b6cb5ac833 ("net: bridge: add per-port multicast flood flag")
Fixes: 99f906e9ad ("bridge: add per-port broadcast flood flag")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-05 11:21:03 -04:00
David S. Miller
4d89ac2dd5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter/IPVS/OVS fixes for net

The following patchset contains a rather large batch of Netfilter, IPVS
and OVS fixes for your net tree. This includes fixes for ctnetlink, the
userspace conntrack helper infrastructure, conntrack OVS support,
ebtables DNAT target, several leaks in error path among other. More
specifically, they are:

1) Fix reference count leak in the CT target error path, from Gao Feng.

2) Remove conntrack entry clashing with a matching expectation, patch
   from Jarno Rajahalme.

3) Fix bogus EEXIST when registering two different userspace helpers,
   from Liping Zhang.

4) Don't leak dummy elements in the new bitmap set type in nf_tables,
   from Liping Zhang.

5) Get rid of module autoload from conntrack update path in ctnetlink,
   we don't need autoload at this late stage and it is happening with
   rcu read lock held which is not good. From Liping Zhang.

6) Fix deadlock due to double-acquire of the expect_lock from conntrack
   update path, this fixes a bug that was introduced when the central
   spinlock got removed. Again from Liping Zhang.

7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock
   protection that was selected when the central spinlock was removed was
   not really protecting anything at all.

8) Protect sequence adjustment under ct->lock.

9) Missing socket match with IPv6, from Peter Tirsek.

10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from
    Linus Luessing.

11) Don't give up on evaluating the expression on new entries added via
    dynset expression in nf_tables, from Liping Zhang.

12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals
    with non-linear skbuffs.

13) Don't allow IPv6 service in IPVS if no IPv6 support is available,
    from Paolo Abeni.

14) Missing mutex release in error path of xt_find_table_lock(), from
    Dan Carpenter.

15) Update maintainers files, Netfilter section. Add Florian to the
    file, refer to nftables.org and change project status from Supported
    to Maintained.

16) Bail out on mismatching extensions in element updates in nf_tables.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03 10:11:26 -04:00
David S. Miller
a01aa920b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. A large bunch of code cleanups, simplify the conntrack extension
codebase, get rid of the fake conntrack object, speed up netns by
selective synchronize_net() calls. More specifically, they are:

1) Check for ct->status bit instead of using nfct_nat() from IPVS and
   Netfilter codebase, patch from Florian Westphal.

2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao.

3) Simplify FTP IPVS helper module registration path, from Arushi Singhal.

4) Introduce nft_is_base_chain() helper function.

5) Enforce expectation limit from userspace conntrack helper,
   from Gao Feng.

6) Add nf_ct_remove_expect() helper function, from Gao Feng.

7) NAT mangle helper function return boolean, from Gao Feng.

8) ctnetlink_alloc_expect() should only work for conntrack with
   helpers, from Gao Feng.

9) Add nfnl_msg_type() helper function to nfnetlink to build the
   netlink message type.

10) Get rid of unnecessary cast on void, from simran singhal.

11) Use seq_puts()/seq_putc() instead of seq_printf() where possible,
    also from simran singhal.

12) Use list_prev_entry() from nf_tables, from simran signhal.

13) Remove unnecessary & on pointer function in the Netfilter and IPVS
    code.

14) Remove obsolete comment on set of rules per CPU in ip6_tables,
    no longer true. From Arushi Singhal.

15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng.

16) Remove unnecessary nested rcu_read_lock() in
    __nf_nat_decode_session(). Code running from hooks are already
    guaranteed to run under RCU read side.

17) Remove deadcode in nf_tables_getobj(), from Aaron Conole.

18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(),
    also from Aaron.

19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole.

20) Don't propagate NF_DROP error to userspace via ctnetlink in
    __nf_nat_alloc_null_binding() function, from Gao Feng.

21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks,
    from Gao Feng.

22) Kill the fake untracked conntrack objects, use ctinfo instead to
    annotate a conntrack object is untracked, from Florian Westphal.

23) Remove nf_ct_is_untracked(), now obsolete since we have no
    conntrack template anymore, from Florian.

24) Add event mask support to nft_ct, also from Florian.

25) Move nf_conn_help structure to
    include/net/netfilter/nf_conntrack_helper.h.

26) Add a fixed 32 bytes scratchpad area for conntrack helpers.
    Thus, we don't deal with variable conntrack extensions anymore.
    Make sure userspace conntrack helper doesn't go over that size.
    Remove variable size ct extension infrastructure now this code
    got no more clients. From Florian Westphal.

27) Restore offset and length of nf_ct_ext structure to 8 bytes now
    that wraparound is not possible any longer, also from Florian.

28) Allow to get rid of unassured flows under stress in conntrack,
    this applies to DCCP, SCTP and TCP protocols, from Florian.

29) Shrink size of nf_conntrack_ecache structure, from Florian.

30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker,
    from Gao Feng.

31) Register SYNPROXY hooks on demand, from Florian Westphal.

32) Use pernet hook whenever possible, instead of global hook
    registration, from Florian Westphal.

33) Pass hook structure to ebt_register_table() to consolidate some
    infrastructure code, from Florian Westphal.

34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the
    SYNPROXY code, to make sure device stats are not fooled, patch
    from Gao Feng.

35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we
    don't need anymore if we just select a fixed size instead of
    expensive runtime time calculation of this. From Florian.

36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(),
    from Florian.

37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from
    Florian.

38) Attach NAT extension on-demand from masquerade and pptp helper
    path, from Florian.

39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole.

40) Speed up netns by selective calls of synchronize_net(), from
    Florian Westphal.

41) Silence stack size warning gcc in 32-bit arch in snmp helper,
    from Florian.

42) Inconditionally call nf_ct_ext_destroy(), even if we have no
    extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from
    Liping Zhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01 10:47:53 -04:00
Arkadi Sharshevsky
58073b32b0 net: bridge: Fix improper taking over HW learned FDB
Commit 7e26bf45e4 ("net: bridge: allow SW learn to take over HW fdb
entries") added the ability to "take over an entry which was previously
learned via HW when it shows up from a SW port".

However, if an entry was learned via HW and then a control packet
(e.g., ARP request) was trapped to the CPU, the bridge driver will
update the entry and remove the externally learned flag, although the
entry is still present in HW. Instead, only clear the externally learned
flag in case of roaming.

Fixes: 7e26bf45e4 ("net: bridge: allow SW learn to take over HW fdb entries")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30 22:46:32 -04:00
Mike Manning
99f906e9ad bridge: add per-port broadcast flood flag
Support for l2 multicast flood control was added in commit b6cb5ac833
("net: bridge: add per-port multicast flood flag"). It allows broadcast
as it was introduced specifically for unknown multicast flood control.
But as broadcast is a special case of multicast, this may also need to
be disabled. For this purpose, introduce a flag to disable the flooding
of received l2 broadcasts. This approach is backwards compatible and
provides flexibility in filtering for the desired packet types.

Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Mike Manning <mmanning@brocade.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27 16:34:29 -04:00
David S. Miller
b1513c3531 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26 22:39:08 -04:00
Florian Westphal
aee12a0a37 ebtables: remove nf_hook_register usage
Similar to ip_register_table, pass nf_hook_ops to ebt_register_table().
This allows to handle hook registration also via pernet_ops and allows
us to avoid use of legacy register_hook api.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-26 09:30:21 +02:00
Xin Long
b1b9d36602 bridge: move bridge multicast cleanup to ndo_uninit
During removing a bridge device, if the bridge is still up, a new mdb entry
still can be added in br_multicast_add_group() after all mdb entries are
removed in br_multicast_dev_del(). Like the path:

  mld_ifc_timer_expire ->
    mld_sendpack -> ...
      br_multicast_rcv ->
        br_multicast_add_group

The new mp's timer will be set up. If the timer expires after the bridge
is freed, it may cause use-after-free panic in br_multicast_group_expired.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: [<ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge]
Call Trace:
 <IRQ>
 [<ffffffff81094536>] call_timer_fn+0x36/0x110
 [<ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge]
 [<ffffffff81096967>] run_timer_softirq+0x237/0x340
 [<ffffffff8108dcbf>] __do_softirq+0xef/0x280
 [<ffffffff8169889c>] call_softirq+0x1c/0x30
 [<ffffffff8102c275>] do_softirq+0x65/0xa0
 [<ffffffff8108e055>] irq_exit+0x115/0x120
 [<ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60
 [<ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80

Nikolay also found it would cause a memory leak - the mdb hash is
reallocated and not freed due to the mdb rehash.

unreferenced object 0xffff8800540ba800 (size 2048):
  backtrace:
    [<ffffffff816e2287>] kmemleak_alloc+0x67/0xc0
    [<ffffffff81260bea>] __kmalloc+0x1ba/0x3e0
    [<ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge]
    [<ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge]
    [<ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge]
    [<ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge]
    [<ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge]
    [<ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0
    [<ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10
    [<ffffffff815c8850>] dev_queue_xmit+0x10/0x20
    [<ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6]
    [<ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6]
    [<ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6]
    [<ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6]
    [<ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6]
    [<ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6]

This could happen when ip link remove a bridge or destroy a netns with a
bridge device inside.

With Nikolay's suggestion, this patch is to clean up bridge multicast in
ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so
that netif_running check in br_multicast_add_group can avoid this issue.

v1->v2:
  - fix this issue by moving br_multicast_dev_del to ndo_uninit, instead
    of calling dev_close in br_dev_delete.

(NOTE: Depends upon b6fe0440c6 ("bridge: implement missing ndo_uninit()"))

Fixes: e10177abf8 ("bridge: multicast: fix handling of temp and perm entries")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 14:02:39 -04:00
Linus Lüssing
cf3cb246e2 bridge: ebtables: fix reception of frames DNAT-ed to bridge device/port
When trying to redirect bridged frames to the bridge device itself or
a bridge port (brouting) via the dnat target then this currently fails:

The ethernet destination of the frame is dnat'ed to the MAC address of
the bridge device or port just fine. However, the IP code drops it in
the beginning of ip_input.c/ip_rcv() as the dnat target left
the skb->pkt_type as PACKET_OTHERHOST.

Fixing this by resetting skb->pkt_type to an appropriate type after
dnat'ing.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-25 11:08:31 +02:00
David Ahern
c21ef3e343 net: rtnetlink: plumb extended ack to doit function
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse
for doit functions that call it directly.

This is the first step to using extended error reporting in rtnetlink.
>From here individual subsystems can be updated to set netlink_ext_ack as
needed.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17 15:35:38 -04:00
Nikolay Aleksandrov
cab93af0ed net: bridge: notify on hw fdb takeover
Recently we added support for SW fdbs to take over HW ones, but that
results in changing a user-visible fdb flag thus we need to send a
notification, also it's consistent with how HW takes over SW entries.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17 13:45:34 -04:00
David S. Miller
6b6cbc1471 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts were simply overlapping changes.  In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.

In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15 21:16:30 -04:00
Johannes Berg
fceb6435e8 netlink: pass extended ACK struct to parsing functions
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13 13:58:22 -04:00
Ido Schimmel
5b8d5429da bridge: netlink: register netdevice before executing changelink
Peter reported a kernel oops when executing the following command:

$ ip link add name test type bridge vlan_default_pvid 1

[13634.939408] BUG: unable to handle kernel NULL pointer dereference at
0000000000000190
[13634.939436] IP: __vlan_add+0x73/0x5f0
[...]
[13634.939783] Call Trace:
[13634.939791]  ? pcpu_next_unpop+0x3b/0x50
[13634.939801]  ? pcpu_alloc+0x3d2/0x680
[13634.939810]  ? br_vlan_add+0x135/0x1b0
[13634.939820]  ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0
[13634.939834]  ? br_changelink+0x120/0x4e0
[13634.939844]  ? br_dev_newlink+0x50/0x70
[13634.939854]  ? rtnl_newlink+0x5f5/0x8a0
[13634.939864]  ? rtnl_newlink+0x176/0x8a0
[13634.939874]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.939886]  ? rtnetlink_rcv_msg+0xe1/0x220
[13634.939896]  ? lookup_fast+0x52/0x370
[13634.939905]  ? rtnl_newlink+0x8a0/0x8a0
[13634.939915]  ? netlink_rcv_skb+0xa1/0xc0
[13634.939925]  ? rtnetlink_rcv+0x24/0x30
[13634.939934]  ? netlink_unicast+0x177/0x220
[13634.939944]  ? netlink_sendmsg+0x2fe/0x3b0
[13634.939954]  ? _copy_from_user+0x39/0x40
[13634.939964]  ? sock_sendmsg+0x30/0x40
[13634.940159]  ? ___sys_sendmsg+0x29d/0x2b0
[13634.940326]  ? __alloc_pages_nodemask+0xdf/0x230
[13634.940478]  ? mem_cgroup_commit_charge+0x7c/0x4e0
[13634.940592]  ? mem_cgroup_try_charge+0x76/0x1a0
[13634.940701]  ? __handle_mm_fault+0xdb9/0x10b0
[13634.940809]  ? __sys_sendmsg+0x51/0x90
[13634.940917]  ? entry_SYSCALL_64_fastpath+0x1e/0xad

The problem is that the bridge's VLAN group is created after setting the
default PVID, when registering the netdevice and executing its
ndo_init().

Fix this by changing the order of both operations, so that
br_changelink() is only processed after the netdevice is registered,
when the VLAN group is already initialized.

Fixes: b6677449df ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Peter V. Saveliev <peter@svinota.eu>
Tested-by: Peter V. Saveliev <peter@svinota.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11 22:22:44 -04:00
Ido Schimmel
b6fe0440c6 bridge: implement missing ndo_uninit()
While the bridge driver implements an ndo_init(), it was missing a
symmetric ndo_uninit(), causing the different de-initialization
operations to be scattered around its dellink() and destructor().

Implement a symmetric ndo_uninit() and remove the overlapping operations
from its dellink() and destructor().

This is a prerequisite for the next patch, as it allows us to have a
proper cleanup upon changelink() failure during the bridge's newlink().

Fixes: b6677449df ("bridge: netlink: call br_changelink() during br_dev_newlink()")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11 22:22:44 -04:00
Arushi Singhal
d4ef383541 netfilter: Remove exceptional & on function name
Remove & from function pointers to conform to the style found elsewhere
in the file. Done using the following semantic patch

// <smpl>
@r@
identifier f;
@@

f(...) { ... }
@@
identifier r.f;
@@

- &f
+ f
// </smpl>

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-07 18:24:47 +02:00
simran singhal
68ad546aef netfilter: Remove unnecessary cast on void pointer
The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|

- (T*)
  e
)

Unnecessary parantheses are also remove.

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-07 17:29:17 +02:00
Andrew Lunn
c6e970a04b net: break include loop netdevice.h, dsa.h, devlink.h
There is an include loop between netdevice.h, dsa.h, devlink.h because
of NETDEV_ALIGN, making it impossible to use devlink structures in
dsa.h.

Break this loop by taking dsa.h out of netdevice.h, add a forward
declaration of dsa_switch_tree and netdev_set_default_ethtool_ops()
function, which is what netdevice.h requires.

No longer having dsa.h in netdevice.h means the includes in dsa.h no
longer get included. This breaks a few other files which depend on
these includes. Add these directly in the affected file.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 22:46:04 -07:00
Nikolay Aleksandrov
eb100e0e24 net: bridge: allow to add externally learned entries from user-space
The NTF_EXT_LEARNED flag was added for switchdev and externally learned
entries, but it can also be used for entries learned via a software
in user-space which requires dynamic entries that do not expire.
One such case that we have is with quagga and evpn which need dynamic
entries but also require to age them themselves.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 12:30:21 -07:00
Nikolay Aleksandrov
7e26bf45e4 net: bridge: allow SW learn to take over HW fdb entries
Allow to take over an entry which was previously learned via HW when it
shows up from a SW port. This is analogous to how HW takes over SW learned
entries already.

Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24 12:30:21 -07:00
David S. Miller
16ae1f2236 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/broadcom/genet/bcmmii.c
	drivers/net/hyperv/netvsc.c
	kernel/bpf/hashtab.c

Almost entirely overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23 16:41:27 -07:00
David S. Miller
41e95736b3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your
net-next tree. A couple of new features for nf_tables, and unsorted
cleanups and incremental updates for the Netfilter tree. More
specifically, they are:

1) Allow to check for TCP option presence via nft_exthdr, patch
   from Phil Sutter.

2) Add symmetric hash support to nft_hash, from Laura Garcia Liebana.

3) Use pr_cont() in ebt_log, from Joe Perches.

4) Remove some dead code in arp_tables reported via static analysis
   tool, from Colin Ian King.

5) Consolidate nf_tables expression validation, from Liping Zhang.

6) Consolidate set lookup via nft_set_lookup().

7) Remove unnecessary rcu read lock side in bridge netfilter, from
   Florian Westphal.

8) Remove unused variable in nf_reject_ipv4, from Tahee Yoo.

9) Pass nft_ctx struct to object initialization indirections, from
   Florian Westphal.

10) Add code to integrate conntrack helper into nf_tables, also from
    Florian.

11) Allow to check if interface index or name exists via
    NFTA_FIB_F_PRESENT, from Phil Sutter.

12) Simplify resolve_normal_ct(), from Florian.

13) Use per-limit spinlock in nft_limit and xt_limit, from Liping Zhang.

14) Use rwlock in nft_set_rbtree set, also from Liping Zhang.

15) One patch to remove a useless printk at netns init path in ipvs,
    and several patches to document IPVS knobs.

16) Use refcount_t for reference counter in the Netfilter/IPVS code,
    from Elena Reshetova.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21 14:28:08 -07:00
WANG Cong
d12c917691 bridge: resolve a false alarm of lockdep
Andrei reported a false alarm of lockdep at net/bridge/br_fdb.c:109,
this is because in Andrei's case, a spin_bug() was already triggered
before this, therefore the debug_locks is turned off, lockdep_is_held()
is no longer accurate after that. We should use lockdep_assert_held_once()
instead of lockdep_is_held() to respect debug_locks.

Fixes: 410b3d48f5 ("bridge: fdb: add proper lock checks in searching functions")
Reported-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 21:29:20 -07:00
David S. Miller
e11607aad5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree, a
rather large batch of fixes targeted to nf_tables, conntrack and bridge
netfilter. More specifically, they are:

1) Don't track fragmented packets if the socket option IP_NODEFRAG is set.
   From Florian Westphal.

2) SCTP protocol tracker assumes that ICMP error messages contain the
   checksum field, what results in packet drops. From Ying Xue.

3) Fix inconsistent handling of AH traffic from nf_tables.

4) Fix new bitmap set representation with big endian. Fix mismatches in
   nf_tables due to incorrect big endian handling too. Both patches
   from Liping Zhang.

5) Bridge netfilter doesn't honor maximum fragment size field, cap to
   largest fragment seen. From Florian Westphal.

6) Fake conntrack entry needs to be aligned to 8 bytes since the 3 LSB
   bits are now used to store the ctinfo. From Steven Rostedt.

7) Fix element comments with the bitmap set type. Revert the flush
   field in the nft_set_iter structure, not required anymore after
   fixing up element comments.

8) Missing error on invalid conntrack direction from nft_ct, also from
   Liping Zhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15 15:13:13 -07:00
Florian Westphal
a13b2082ec bridge: drop netfilter fake rtable unconditionally
Andreas reports kernel oops during rmmod of the br_netfilter module.
Hannes debugged the oops down to a NULL rt6info->rt6i_indev.

Problem is that br_netfilter has the nasty concept of adding a fake
rtable to skb->dst; this happens in a br_netfilter prerouting hook.

A second hook (in bridge LOCAL_IN) is supposed to remove these again
before the skb is handed up the stack.

However, on module unload hooks get unregistered which means an
skb could traverse the prerouting hook that attaches the fake_rtable,
while the 'fake rtable remove' hook gets removed from the hooklist
immediately after.

Fixes: 34666d467c ("netfilter: bridge: move br_netfilter out of the core")
Reported-by: Andreas Karis <akaris@redhat.com>
Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13 13:01:10 -07:00
Florian Westphal
4ca60d08cb netfilter: bridge: honor frag_max_size when refragmenting
consider a bridge with mtu 9000, but end host sending smaller
packets to another host with mtu < 9000.

In this case, after reassembly, bridge+defrag would refragment,
and then attempt to send the reassembled packet as long as it
was below 9k.

Instead we have to cap by the largest fragment size seen.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-13 13:31:53 +01:00
Florian Westphal
efc9b8e33b netfilter: bridge: remove unneeded rcu_read_lock
as comment says, the function is always called with rcu read lock held.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-08 19:01:23 +01:00
Liping Zhang
c56e3956c1 netfilter: nf_tables: validate the expr explicitly after init successfully
When we want to validate the expr's dependency or hooks, we must do two
things to accomplish it. First, write a X_validate callback function
and point ->validate to it. Second, call X_validate in init routine.
This is very common, such as fib, nat, reject expr and so on ...

It is a little ugly, since we will call X_validate in the expr's init
routine, it's better to do it in nf_tables_newexpr. So we can avoid to
do this again and again. After doing this, the second step listed above
is not useful anymore, remove them now.

Patch was tested by nftables/tests/py/nft-test.py and
nftables/tests/shell/run-tests.sh.

Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-06 18:22:12 +01:00
Joe Perches
13fa745da2 netfilter: Use pr_cont where appropriate
Logging output was changed when simple printks without KERN_CONT
are now emitted on a new line and KERN_CONT is required to continue
lines so use pr_cont.

Miscellanea:

o realign arguments
o use print_hex_dump instead of a local variant

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-06 18:00:48 +01:00
Linus Torvalds
8d70eeb84a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix double-free in batman-adv, from Sven Eckelmann.

 2) Fix packet stats for fast-RX path, from Joannes Berg.

 3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

 4) Fix sendmsg deadlock in rxrpc, from David Howells.

 5) Add missing RCU locking to transport hashtable scan, from Xin Long.

 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

 7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

 8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

 9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...
2017-03-04 17:31:39 -08:00
Ingo Molnar
174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Mike Manning
8953de2f02 net: bridge: allow IPv6 when multicast flood is disabled
Even with multicast flooding turned off, IPv6 ND should still work so
that IPv6 connectivity is provided. Allow this by continuing to flood
multicast traffic originated by us.

Fixes: b6cb5ac833 ("net: bridge: add per-port multicast flood flag")
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Mike Manning <mmanning@brocade.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01 20:55:57 -08:00
Yotam Gigi
df2c43343b bridge: Fix error path in nbp_vlan_init
Fix error path order in nbp_vlan_init, so if switchdev_port_attr_set
call failes, the vlan_hash wouldn't be destroyed before inited.

Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-01 14:55:28 -08:00
Alexey Dobriyan
5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Roopa Prabhu
eda7a5e88d bridge: don't indicate expiry on NTF_EXT_LEARNED fdb entries
added_by_external_learn fdb entries are added and expired by
external entities like switchdev driver or external controllers.
ageing is already disabled for such entries. Hence, don't
indicate expiry for such fdb entries.

CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
CC: Jiri Pirko <jiri@resnulli.us>
CC: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17 13:56:56 -05:00
Roopa Prabhu
afcb50ba7f bridge: vlan_tunnel: explicitly reset metadata attrs to NULL on failure
Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17 13:33:41 -05:00
Nikolay Aleksandrov
5019ab50f2 bridge: fdb: converge fdb_delete_by functions into one
We can simplify the logic of entries pointing to the bridge by
converging the fdb_delete_by functions, this would allow us to use the
same function for both cases since the fdb's dst is set to NULL if it is
pointing to the bridge thus we can always check for a port match.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 12:41:03 -05:00
Nikolay Aleksandrov
410b3d48f5 bridge: fdb: add proper lock checks in searching functions
In order to avoid new errors add checks to br_fdb_find and fdb_find_rcu
functions. The first requires hash_lock, the second obviously RCU.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 12:41:03 -05:00
Nikolay Aleksandrov
bfd0aeac52 bridge: fdb: converge fdb searching functions into one
Before this patch we had 3 different fdb searching functions which was
confusing. This patch reduces all of them to one - fdb_find_rcu(), and
two flavors: br_fdb_find() which requires hash_lock and br_fdb_find_rcu
which requires RCU. This makes it clear what needs to be used, we also
remove two abusers of __br_fdb_get which called it under hash_lock and
replace them with br_fdb_find().

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-14 12:41:02 -05:00
Nogah Frankel
6d5496483f switchdev: bridge: Offload mc router ports
Offload the mc router ports list, whenever it is being changed.
It is done because in some cases mc packets needs to be flooded to all
the ports in this list.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 11:46:39 -05:00
Nogah Frankel
f12e7d95d1 bridge: mcast: Merge the mc router ports deletions to one function
There are three places where a port gets deleted from the mc router port
list. This patch join the actual deletion to one function.
It will be helpful for later patch that will offload changes in the mc
router ports list.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 11:46:38 -05:00
Nogah Frankel
147c1e9b90 switchdev: bridge: Offload multicast disabled
Offload multicast disabled flag, for more accurate mc flood behavior:
When it is on, the mdb should be ignored.
When it is off, unregistered mc packets should be flooded to mc router
ports.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10 11:46:38 -05:00
Roopa Prabhu
8ef9594764 bridge: vlan tunnel id info range fill size calc cleanups
This fixes a bug and cleans up tunnelid range size
calculation code by using consistent variable names
and checks in size calculation and fill functions.

tested for a few cases of vlan-vni range mappings:
(output from patched iproute2):
$bridge vlan showtunnel
port     vid        tunid
vxlan0   100-105    1000-1005
         200        2000
         210        2100
         211-213    2100-2102
         214        2104
         216-217    2108-2109
         219        2119

Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08 14:39:19 -05:00
stephen hemminger
ca6d4480f8 bridge: avoid unnecessary read of jiffies
Jiffies is volatile so read it once.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 14:16:05 -05:00
Roopa Prabhu
a8cab863a7 bridge: remove unnecessary check for vtbegin in br_fill_vlan_tinfo_range
vtbegin should not be NULL in this function, Its already checked by the
caller.

this should silence the below smatch complaint:
  net/bridge/br_netlink_tunnel.c:144 br_fill_vlan_tinfo_range()
    error: we previously assumed 'vtbegin' could be null (see line 130)

net/bridge/br_netlink_tunnel.c
   129
   130      if (vtbegin && vtend && (vtend->vid - vtbegin->vid) > 0) {
                    ^^^^^^^
Check for NULL.

Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Reported-By: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 14:14:12 -05:00
Nikolay Aleksandrov
bb580ad698 bridge: tunnel: fix attribute checks in br_parse_vlan_tunnel_info
These checks should go after the attributes have been parsed otherwise
we're using tb uninitialized.

Fixes: efa5356b0d ("bridge: per vlan dst_metadata netlink support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 14:05:30 -05:00
Colin Ian King
1f02b5f42f net: bridge: remove redundant check to see if err is set
The error check on err is redundant as it is being checked
previously each time it has been updated.  Remove this redundant
check.

Detected with CoverityScan, CID#140030("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 14:04:29 -05:00
Nikolay Aleksandrov
83a718d629 bridge: fdb: write to used and updated at most once per jiffy
Writing once per jiffy is enough to limit the bridge's false sharing.
After this change the bridge doesn't show up in the local load HitM stats.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 22:53:13 -05:00
Nikolay Aleksandrov
1214628cb1 bridge: move write-heavy fdb members in their own cache line
Fdb's used and updated fields are written to on every packet forward and
packet receive respectively. Thus if we are receiving packets from a
particular fdb, they'll cause false-sharing with everyone who has looked
it up (even if it didn't match, since mac/vid share cache line!). The
"used" field is even worse since it is updated on every packet forward
to that fdb, thus the standard config where X ports use a single gateway
results in 100% fdb false-sharing. Note that this patch does not prevent
the last scenario, but it makes it better for other bridge participants
which are not using that fdb (and are only doing lookups over it).
The point is with this move we make sure that only communicating parties
get the false-sharing, in a later patch we'll show how to avoid that too.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 22:53:13 -05:00
Nikolay Aleksandrov
f7cdee8a79 bridge: move to workqueue gc
Move the fdb garbage collector to a workqueue which fires at least 10
milliseconds apart and cleans chain by chain allowing for other tasks
to run in the meantime. When having thousands of fdbs the system is much
more responsive. Most importantly remove the need to check if the
matched entry has expired in __br_fdb_get that causes false-sharing and
is completely unnecessary if we cleanup entries, at worst we'll get 10ms
of traffic for that entry before it gets deleted.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 22:53:13 -05:00
Nikolay Aleksandrov
1f90c7f347 bridge: modify bridge and port to have often accessed fields in one cache line
Move around net_bridge so the vlan fields are in the beginning since
they're checked on every packet even if vlan filtering is disabled.
For the port move flags & vlan group to the beginning, so they're in the
same cache line with the port's state (both flags and state are checked
on each packet).

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 22:53:13 -05:00
Ido Schimmel
a8eca32615 net: remove ndo_neigh_{construct, destroy} from stacked devices
In commit 18bfb924f0 ("net: introduce default neigh_construct/destroy
ndo calls for L2 upper devices") we added these ndos to stacked devices
such as team and bond, so that calls will be propagated to mlxsw.

However, previous commit removed the reliance on these ndos and no new
users of these ndos have appeared since above mentioned commit. We can
therefore safely remove this dead code.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06 11:25:57 -05:00
David S. Miller
52e01b84a2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree, they are:

1) Stash ctinfo 3-bit field into pointer to nf_conntrack object from
   sk_buff so we only access one single cacheline in the conntrack
   hotpath. Patchset from Florian Westphal.

2) Don't leak pointer to internal structures when exporting x_tables
   ruleset back to userspace, from Willem DeBruijn. This includes new
   helper functions to copy data to userspace such as xt_data_to_user()
   as well as conversions of our ip_tables, ip6_tables and arp_tables
   clients to use it. Not surprinsingly, ebtables requires an ad-hoc
   update. There is also a new field in x_tables extensions to indicate
   the amount of bytes that we copy to userspace.

3) Add nf_log_all_netns sysctl: This new knob allows you to enable
   logging via nf_log infrastructure for all existing netnamespaces.
   Given the effort to provide pernet syslog has been discontinued,
   let's provide a way to restore logging using netfilter kernel logging
   facilities in trusted environments. Patch from Michal Kubecek.

4) Validate SCTP checksum from conntrack helper, from Davide Caratti.

5) Merge UDPlite conntrack and NAT helpers into UDP, this was mostly
   a copy&paste from the original helper, from Florian Westphal.

6) Reset netfilter state when duplicating packets, also from Florian.

7) Remove unnecessary check for broadcast in IPv6 in pkttype match and
   nft_meta, from Liping Zhang.

8) Add missing code to deal with loopback packets from nft_meta when
   used by the netdev family, also from Liping.

9) Several cleanups on nf_tables, one to remove unnecessary check from
   the netlink control plane path to add table, set and stateful objects
   and code consolidation when unregister chain hooks, from Gao Feng.

10) Fix harmless reference counter underflow in IPVS that, however,
    results in problems with the introduction of the new refcount_t
    type, from David Windsor.

11) Enable LIBCRC32C from nf_ct_sctp instead of nf_nat_sctp,
    from Davide Caratti.

12) Missing documentation on nf_tables uapi header, from Liping Zhang.

13) Use rb_entry() helper in xt_connlimit, from Geliang Tang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 16:58:20 -05:00
Roopa Prabhu
11538d039a bridge: vlan dst_metadata hooks in ingress and egress paths
- ingress hook:
    - if port is a tunnel port, use tunnel info in
      attached dst_metadata to map it to a local vlan
- egress hook:
    - if port is a tunnel port, use tunnel info attached to
      vlan to set dst_metadata on the skb

CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 15:21:22 -05:00
Roopa Prabhu
efa5356b0d bridge: per vlan dst_metadata netlink support
This patch adds support to attach per vlan tunnel info dst
metadata. This enables bridge driver to map vlan to tunnel_info
at ingress and egress. It uses the kernel dst_metadata infrastructure.

The initial use case is vlan to vni bridging, but the api is generic
to extend to any tunnel_info in the future:
    - Uapi to configure/unconfigure/dump per vlan tunnel data
    - netlink functions to configure vlan and tunnel_info mapping
    - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach
    dst_metadata to bridged packets on ports. off by default.
    - changes to existing code is mainly refactor some existing vlan
    handling netlink code + hooks for new vlan tunnel code
    - I have kept the vlan tunnel code isolated in separate files.
    - most of the netlink vlan tunnel code is handling of vlan-tunid
    ranges (follows the vlan range handling code). To conserve space
    vlan-tunid by default are always dumped in ranges if applicable.

Use case:
example use for this is a vxlan bridging gateway or vtep
which maps vlans to vn-segments (or vnis).

iproute2 example (patched and pruned iproute2 output to just show
relevant fdb entries):
example shows same host mac learnt on two vni's and
vlan 100 maps to vni 1000, vlan 101 maps to vni 1001

before (netdev per vni):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self

after this patch with collect metdata in bridged mode (single netdev):
$bridge fdb show | grep "00:02:00:00:00:03"
00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self
00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge
00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self

CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 15:21:22 -05:00
Michal Kubeček
2851940ffe netfilter: allow logging from non-init namespaces
Commit 69b34fb996 ("netfilter: xt_LOG: add net namespace support for
xt_LOG") disabled logging packets using the LOG target from non-init
namespaces. The motivation was to prevent containers from flooding
kernel log of the host. The plan was to keep it that way until syslog
namespace implementation allows containers to log in a safe way.

However, the work on syslog namespace seems to have hit a dead end
somewhere in 2013 and there are users who want to use xt_LOG in all
network namespaces. This patch allows to do so by setting

  /proc/sys/net/netfilter/nf_log_all_netns

to a nonzero value. This sysctl is only accessible from init_net so that
one cannot switch the behaviour from inside a container.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-02 14:31:58 +01:00
David S. Miller
4e8f2fc1a5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two trivial overlapping changes conflicts in MPLS and mlx5.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-28 10:33:06 -05:00
Arnd Bergmann
5b9d6b154a bridge: move maybe_deliver_addr() inside #ifdef
The only caller of this new function is inside of an #ifdef checking
for CONFIG_BRIDGE_IGMP_SNOOPING, so we should move the implementation
there too, in order to avoid this harmless warning:

net/bridge/br_forward.c:177:13: error: 'maybe_deliver_addr' defined but not used [-Werror=unused-function]

Fixes: 6db6f0eae6 ("bridge: multicast to unicast")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 23:16:06 -05:00
Felix Fietkau
6db6f0eae6 bridge: multicast to unicast
Implements an optional, per bridge port flag and feature to deliver
multicast packets to any host on the according port via unicast
individually. This is done by copying the packet per host and
changing the multicast destination MAC to a unicast one accordingly.

multicast-to-unicast works on top of the multicast snooping feature of
the bridge. Which means unicast copies are only delivered to hosts which
are interested in it and signalized this via IGMP/MLD reports
previously.

This feature is intended for interface types which have a more reliable
and/or efficient way to deliver unicast packets than broadcast ones
(e.g. wifi).

However, it should only be enabled on interfaces where no IGMPv2/MLDv1
report suppression takes place. This feature is disabled by default.

The initial patch and idea is from Felix Fietkau.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[linus.luessing@c0d3.blue: various bug + style fixes, commit message]
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24 12:39:52 -05:00
Ivan Vecera
b6677449df bridge: netlink: call br_changelink() during br_dev_newlink()
Any bridge options specified during link creation (e.g. ip link add)
are ignored as br_dev_newlink() does not process them.
Use br_changelink() to do it.

Fixes: 1332351617 ("bridge: implement rtnl_link_ops->changelink")
Signed-off-by: Ivan Vecera <cera@cera.cz>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20 15:07:27 -05:00
Lance Richardson
53631a5f9c bridge: sparse fixes in br_ip6_multicast_alloc_query()
Changed type of csum field in struct igmpv3_query from __be16 to
__sum16 to eliminate type warning, made same change in struct
igmpv3_report for consistency.

Fixed up an ntohs() where htons() should have been used instead.

Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17 15:22:05 -05:00
David S. Miller
bb1d303444 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-01-09 15:39:11 -05:00
Willem de Bruijn
ec23189049 xtables: extend matches and targets with .usersize
In matches and targets that define a kernel-only tail to their
xt_match and xt_target data structs, add a field .usersize that
specifies up to where data is to be shared with userspace.

Performed a search for comment "Used internally by the kernel" to find
relevant matches and targets. Manually inspected the structs to derive
a valid offsetof.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-09 17:24:55 +01:00
Willem de Bruijn
b5040f6c33 ebtables: use match, target and data copy_to_user helpers
Convert ebtables to copying entries, matches and targets one by one.

The solution is analogous to that of generic xt_(match|target)_to_user
helpers, but is applied to different structs.

Convert existing helpers ebt_make_XXXname helpers that overwrite
fields of an already copy_to_user'd struct with ebt_XXX_to_user
helpers that copy all relevant fields of the struct from scratch.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-01-09 17:24:54 +01:00
stephen hemminger
bc1f44709c net: make ndo_get_stats64 a void function
The network device operation for reading statistics is only called
in one place, and it ignores the return value. Having a structure
return value is potentially confusing because some future driver could
incorrectly assume that the return value was used.

Fix all drivers with ndo_get_stats64 to have a void function.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08 17:51:44 -05:00
David S. Miller
d896b3120b Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains accumulated Netfilter fixes for your
net tree:

1) Ensure quota dump and reset happens iff we can deliver numbers to
   userspace.

2) Silence splat on incorrect use of smp_processor_id() from nft_queue.

3) Fix an out-of-bound access reported by KASAN in
   nf_tables_rule_destroy(), patch from Florian Westphal.

4) Fix layer 4 checksum mangling in the nf_tables payload expression
   with IPv6.

5) Fix a race in the CLUSTERIP target from control plane path when two
   threads run to add a new configuration object. Serialize invocations
   of clusterip_config_init() using spin_lock. From Xin Long.

6) Call br_nf_pre_routing_finish_bridge_finish() once we are done with
   the br_nf_pre_routing_finish() hook. From Artur Molchanov.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05 11:49:57 -05:00
Artur Molchanov
14221cc45c bridge: netfilter: Fix dropping packets that moving through bridge interface
Problem:
br_nf_pre_routing_finish() calls itself instead of
br_nf_pre_routing_finish_bridge(). Due to this bug reverse path filter drops
packets that go through bridge interface.

User impact:
Local docker containers with bridge network can not communicate with each
other.

Fixes: c5136b15ea ("netfilter: bridge: add and use br_nf_hook_thresh")
Signed-off-by: Artur Molchanov <artur.molchanov@synesis.ru>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-30 18:22:50 +01:00
Linus Torvalds
7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Vivien Didelot
34d8acd8aa net: bridge: shorten ageing time on topology change
802.1D [1] specifies that the bridges must use a short value to age out
dynamic entries in the Filtering Database for a period, once a topology
change has been communicated by the root bridge.

Add a bridge_ageing_time member in the net_bridge structure to store the
bridge ageing time value configured by the user (ioctl/netlink/sysfs).

If we are using in-kernel STP, shorten the ageing time value to twice
the forward delay used by the topology when the topology change flag is
set. When the flag is cleared, restore the configured ageing time.

[1] "8.3.5 Notifying topology changes ",
    http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdf

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10 21:28:28 -05:00
Vivien Didelot
8384b5f5b2 net: bridge: add helper to set topology change
Add a __br_set_topology_change helper to set the topology change value.

This can be later extended to add actions when the topology change flag
is set or cleared.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10 21:27:23 -05:00
Vivien Didelot
82dd4332aa net: bridge: add helper to offload ageing time
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME switchdev attr is actually set
when initializing a bridge port, and when configuring the bridge ageing
time from ioctl/netlink/sysfs.

Add a __set_ageing_time helper to offload the ageing time to physical
switches, and add the SWITCHDEV_F_DEFER flag since it can be called
under bridge lock.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10 21:27:23 -05:00
David S. Miller
5fccd64aa4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains a large Netfilter update for net-next,
to summarise:

1) Add support for stateful objects. This series provides a nf_tables
   native alternative to the extended accounting infrastructure for
   nf_tables. Two initial stateful objects are supported: counters and
   quotas. Objects are identified by a user-defined name, you can fetch
   and reset them anytime. You can also use a maps to allow fast lookups
   using any arbitrary key combination. More info at:

   http://marc.info/?l=netfilter-devel&m=148029128323837&w=2

2) On-demand registration of nf_conntrack and defrag hooks per netns.
   Register nf_conntrack hooks if we have a stateful ruleset, ie.
   state-based filtering or NAT. The new nf_conntrack_default_on sysctl
   enables this from newly created netnamespaces. Default behaviour is not
   modified. Patches from Florian Westphal.

3) Allocate 4k chunks and then use these for x_tables counter allocation
   requests, this improves ruleset load time and also datapath ruleset
   evaluation, patches from Florian Westphal.

4) Add support for ebpf to the existing x_tables bpf extension.
   From Willem de Bruijn.

5) Update layer 4 checksum if any of the pseudoheader fields is updated.
   This provides a limited form of 1:1 stateless NAT that make sense in
   specific scenario, eg. load balancing.

6) Add support to flush sets in nf_tables. This series comes with a new
   set->ops->deactivate_one() indirection given that we have to walk
   over the list of set elements, then deactivate them one by one.
   The existing set->ops->deactivate() performs an element lookup that
   we don't need.

7) Two patches to avoid cloning packets, thus speed up packet forwarding
   via nft_fwd from ingress. From Florian Westphal.

8) Two IPVS patches via Simon Horman: Decrement ttl in all modes to
   prevent infinite loops, patch from Dwip Banerjee. And one minor
   refactoring from Gao feng.

9) Revisit recent log support for nf_tables netdev families: One patch
   to ensure that we correctly handle non-ethernet packets. Another
   patch to add missing logger definition for netdev. Patches from
   Liping Zhang.

10) Three patches for nft_fib, one to address insufficient register
    initialization and another to solve incorrect (although harmless)
    byteswap operation. Moreover update xt_rpfilter and nft_fib to match
    lbcast packets with zeronet as source, eg. DHCP Discover packets
    (0.0.0.0 -> 255.255.255.255). Also from Liping Zhang.

11) Built-in DCCP, SCTP and UDPlite conntrack and NAT support, from
    Davide Caratti. While DCCP is rather hopeless lately, and UDPlite has
    been broken in many-cast mode for some little time, let's give them a
    chance by placing them at the same level as other existing protocols.
    Thus, users don't explicitly have to modprobe support for this and
    NAT rules work for them. Some people point to the lack of support in
    SOHO Linux-based routers that make deployment of new protocols harder.
    I guess other middleboxes outthere on the Internet are also to blame.
    Anyway, let's see if this has any impact in the midrun.

12) Skip software SCTP software checksum calculation if the NIC comes
    with SCTP checksum offload support. From Davide Caratti.

13) Initial core factoring to prepare conversion to hook array. Three
    patches from Aaron Conole.

14) Gao Feng made a wrong conversion to switch in the xt_multiport
    extension in a patch coming in the previous batch. Fix it in this
    batch.

15) Get vmalloc call in sync with kmalloc flags to avoid a warning
    and likely OOM killer intervention from x_tables. From Marcelo
    Ricardo Leitner.

16) Update Arturo Borrero's email address in all source code headers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07 19:16:46 -05:00
David S. Miller
c63d352f05 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-12-06 21:33:19 -05:00
Aaron Conole
679972f3be netfilter: convert while loops to for loops
This is to facilitate converting from a singly-linked list to an array
of elements.

Signed-off-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-12-06 21:42:16 +01:00