Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' has supported --all-kernel / --all-user to configure all
used events to run in kernel space or run in user space. But 'perf stat'
doesn't support these options.
It would be useful to support these options in 'perf stat' too to keep
the same semantics available in both tools.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011050545.3899-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move 'sample_id' array from 'struct evsel' to libperf's 'struct perf_evsel'.
Committer notes:
Removed the 'struct xyarray' from util/evsel.h, not needed anymore
there.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.
Committer notes:
Added stdbool.h as we now use bool here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.
Without fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.000211692 3,13,89,82,34,157 cycles
10.000380119 1,53,98,52,22,294 cycles
10.040467280 17,16,79,265 cycles
Segmentation fault
This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..) if interval is set.
With fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.019866622 3,15,14,43,08,697 cycles
10.039865756 3,15,16,31,95,261 cycles
10.059950628 1,26,05,47,158 cycles
5.009902655 3,14,52,62,33,932 cycles
10.019880228 3,14,52,22,89,154 cycles
10.030543876 66,90,18,333 cycles
5.009848281 3,14,51,98,25,437 cycles
10.029854402 3,15,14,93,04,918 cycles
5.009834177 3,14,51,95,92,316 cycles
Committer notes:
Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:
(gdb) run stat -r0 -I500 sleep 1
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
(gdb) bt
#0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
#1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
#2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
#3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
#4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
#5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
#6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
(gdb)
Mostly the same as just before this patch:
Program received signal SIGSEGV, Segmentation fault.
0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
(gdb) bt
#0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
#1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
at util/stat-display.c:1172
#2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
#3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
#4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
#5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
#6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
#7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
(gdb)
Fixes: d4f63a4741 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using 'perf stat' with repeat and interval option, it shows wrong
values for events.
The wrong values will be shown for the first interval on the second and
subsequent repetitions.
Without the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.000282489 53 faults
2.000282489 513 sched:sched_switch
4.005478208 3,721 faults
4.005478208 2,666 sched:sched_switch
5.025470933 395 faults
5.025470933 1,307 sched:sched_switch
2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------
2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------
4.019612206 4,730 faults
4.019612206 2,746 sched:sched_switch
5.039615484 3,953 faults
5.039615484 1,496 sched:sched_switch
2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------
2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------
4.000480342 4,282 faults
4.000480342 2,303 sched:sched_switch
5.000916811 1,322 faults
5.000916811 1,064 sched:sched_switch
#
prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.
The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.
On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.
Hence there is a possibility of events showing up as big number.
Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.
With the fix:
# perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5
2.019349347 2,597 faults
2.019349347 2,753 sched:sched_switch
4.019577372 3,098 faults
4.019577372 2,532 sched:sched_switch
5.019415481 1,879 faults
5.019415481 1,356 sched:sched_switch
2.000178813 8,468 faults
2.000178813 2,254 sched:sched_switch
4.000404621 7,440 faults
4.000404621 1,266 sched:sched_switch
5.040196079 2,458 faults
5.040196079 556 sched:sched_switch
2.000191939 6,870 faults
2.000191939 1,170 sched:sched_switch
4.000414103 541 faults
4.000414103 902 sched:sched_switch
5.000809863 450 faults
5.000809863 364 sched:sched_switch
#
Committer notes:
This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.
Fixes: 13370a9b5b ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Together with the other synthsizers, and rename it to
perf_event__synthesize_stat_events().
This allows us to stop including event.h in util/stat.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q5ebhrp44txboobs86htu5r9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From 'perf stat', so that it can be used from multiple places.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190902121255.536-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that thread.h isn't included by any other header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-kh333ivjbw05wsggckpziu86@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its not needed there, add it to the places that need it and were getting
it via those headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5yulx1u16vyd0zmrbg1tjhju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seems to be a better place for this function to live, further shrinking
the hodge-podge that perf.h was.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0zzt1u9rpyjukdy1ccr2u5r9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of libperf library as basic functions operating on
perf_thread_map objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of the libperf library as one of basic functions operating
on the perf_cpu_map class.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the nr_members member from perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the evlist__set_maps() function from tools/perf to libperf.
Committer notes:
Fix up reject due to earlier inversion in calling perf_evlist__init().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-57-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions:
cpu_map__get()
cpu_map__put()
to libperf with following names:
perf_cpu_map__get()
perf_cpu_map__put()
Committer notes:
Added fixes for arm/arm64
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__disable() to evlist__disable(), so we don't have a
name clash when we add perf_evlist__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__enable() to evlist__enable(), so we don't have a
name clash when we add perf_evlist__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__close() to evlist__close(), so we don't have a name
clash when we add perf_evlist__close() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__delete() to evlist__delete(), so we don't have a
name clash when we add perf_evlist__delete() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__new() to evlist__new(), so we don't have a name
clash when we add perf_evlist__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because we will make struct perf_counts_values public in following
patches and 'loaded' is implementation related.
No functional change is expected.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat
mode:
# perf stat -e '{cycles,instructions}' -r 10 ls
It's caused by memory corruption due to not cleaned evsel's id array and
index, which needs to be rebuilt in every stat iteration. Currently the
ids index grows, while the array (which is also not freed) has the same
size.
Fixing this by releasing id array and zeroing ids index in
perf_evsel__close function.
We also need to keep the evsel_list alive for stat record (which is
disabled in repeat mode).
Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where the equivalent was already being done, i.e.:
free(a);
a = NULL;
And in placs where struct members are being freed so that if we have
some erroneous reference to its struct, then accesses to freed members
will result in segfaults, which we can detect faster than use after free
to areas that may still have something seemingly valid.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-jatyoofo5boc1bsvoig6bb6i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on the following report from Smatch, fix the use-after-freed
pointer.
tools/perf/builtin-stat.c:1353
add_default_attributes() warn: passing freed memory 'str'.
The pointer 'str' has been freed but later it is still passed into the
function parse_events_print_error(). This patch fixes this
use-after-freed issue.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190702103420.27540-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXP/1xQAKCRCyPKLppCJ+
J9xcAQCwOITAshE7op7HbKUPtkqiMNu+hpNa3skhxEpGHvKO0AEArpBXtuvEP8EU
PZsp+8vcVrlZ+dZutttgvkRz25mScg8=
=kfFb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is useful to aggregate counts per die. E.g. Uncore becomes die-scope
on Xeon Cascade Lake-AP.
Introduce a new option "--per-die" to support per-die aggregation.
The global id for each core has been changed to socket + die id + core
id. The global id for each die is socket + die id.
Add die information for per-core aggregation. The output of per-core
aggregation will be changed from "S0-C0" to "S0-D0-C0". Any scripts
which rely on the output format of per-core aggregation probably be
broken.
For 'perf stat record/report', there is no die information when
processing the old perf.data. The per-die result will be the same as
per-socket.
Committer notes:
Renamed 'die' variable to 'die_id' to fix the build in some systems:
CC /tmp/build/perf/builtin-script.o
cc1: warnings being treated as errors
builtin-stat.c: In function 'perf_env__get_die':
builtin-stat.c:963: error: declaration of 'die' shadows a global declaration
util/util.h:19: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/.builtin-stat.o.tmp': No such file or directory
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-bsnhx7vgsuu6ei307mw60mbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on 1 normalized pattern(s):
released under the gpl v2 and only v2 not any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 12 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141332.526460839@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this patch, we can use the 'percore' event qualifier in perf-stat.
root@skl:/tmp# perf stat -e cpu/event=0,umask=0x3,percore=1/,cpu/event=0,umask=0x3/ -a -A -I1000
1.000773050 S0-C0 98,352,832 cpu/event=0,umask=0x3,percore=1/ (50.01%)
1.000773050 S0-C1 103,763,057 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 S0-C2 196,776,995 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 S0-C3 176,493,779 cpu/event=0,umask=0x3,percore=1/ (50.02%)
1.000773050 CPU0 47,699,641 cpu/event=0,umask=0x3/ (50.02%)
1.000773050 CPU1 49,052,451 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU2 102,771,422 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU3 100,784,662 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU4 43,171,342 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU5 54,152,158 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU6 93,618,410 cpu/event=0,umask=0x3/ (49.98%)
1.000773050 CPU7 74,477,589 cpu/event=0,umask=0x3/ (49.99%)
In this example, we count the event 'ref-cycles' per-core and per-CPU in
one perf stat command-line. From the output, we can see:
S0-C0 = CPU0 + CPU4
S0-C1 = CPU1 + CPU5
S0-C2 = CPU2 + CPU6
S0-C3 = CPU3 + CPU7
So the result is expected (tiny difference is ignored).
Note that, the 'percore' event qualifier needs to use with option '-A'.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1555077590-27664-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar:
"The main kernel changes were:
- add support for Intel's "adaptive PEBS v4" - which embedds LBS data
in PEBS records and can thus batch up and reduce the IRQ (NMI) rate
significantly - reducing overhead and making call-graph profiling
less intrusive.
- add Intel CPU core and uncore support updates for Tremont, Icelake,
- extend the x86 PMU constraints scheduler with 'constraint ranges'
to better support Icelake hw constraints,
- make x86 call-chain support work better with CONFIG_FRAME_POINTER=y
- misc other changes
Tooling changes:
- updates to the main tools: 'perf record', 'perf trace', 'perf
stat'
- updated Intel and S/390 vendor events
- libtraceevent updates
- misc other updates and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER
watchdog: Fix typo in comment
perf/x86/intel: Add Tremont core PMU support
perf/x86/intel/uncore: Add Intel Icelake uncore support
perf/x86/msr: Add Icelake support
perf/x86/intel/rapl: Add Icelake support
perf/x86/intel/cstate: Add Icelake support
perf/x86/intel: Add Icelake support
perf/x86: Support constraint ranges
perf/x86/lbr: Avoid reading the LBRs when adaptive PEBS handles them
perf/x86/intel: Support adaptive PEBS v4
perf/x86/intel/ds: Extract code of event update in short period
perf/x86/intel: Extract memory code PEBS parser for reuse
perf/x86: Support outputting XMM registers
perf/x86/intel: Force resched when TFA sysctl is modified
perf/core: Add perf_pmu_resched() as global function
perf/headers: Fix stale comment for struct perf_addr_filter
perf/core: Make perf_swevent_init_cpu() static
perf/x86: Add sanity checks to x86_schedule_events()
perf/x86: Optimize x86_schedule_events()
...
Arnaldo reported assertion in perf stat record:
assertion failed at util/header.c:875
There's no support for this in the 'perf state record' command, disable
the feature for that case.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 258031c017 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: http://lkml.kernel.org/r/20190409100156.20303-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf metric expression use 'duration_time' internally to normalize
events. Normal 'perf stat' without -x also prints the duration time.
But when using -x, the interval is not output anywhere, which is
inconvenient for any post processing which often wants to normalize
values to time.
So implement 'duration_time' as a proper perf event that can be
specified explicitely with -e.
The previous implementation of 'duration_time' only worked for metric
processing. This adds the concept of a tool event that is handled by the
tool. On the kernel level it is still mapped to the dummy software
event, but the values are not read anymore, but instead computed by the
tool.
Add proper plumbing to handle this in the event parser, and display it
in 'perf stat'. We don't want 'duration_time' to be added up, so it's
only printed for the first CPU.
% perf stat -e duration_time,cycles true
Performance counter stats for 'true':
555,476 ns duration_time
771,958 cycles
0.000555476 seconds time elapsed
0.000644000 seconds user
0.000000000 seconds sys
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190326221823.11518-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -c option to enable multiplex scaling has been useless for quite
some time because scaling is default.
It's only useful as --no-scale to disable scaling. But the non scaling
code path has bitrotted and doesn't print anything because perf output
code relies on value run/ena information.
Also even when we don't want to scale a value it's still useful to show
its multiplex percentage.
This patch:
- Fixes help and documentation to show --no-scale instead of -c
- Removes -c, only keeps the long option because -c doesn't support negatives.
- Enables running/enabled even with --no-scale
- And fixes some other problems in the no-scale output.
Before:
$ perf stat --no-scale -e cycles true
Performance counter stats for 'true':
<not counted> cycles
0.000984154 seconds time elapsed
After:
$ ./perf stat --no-scale -e cycles true
Performance counter stats for 'true':
706,070 cycles
0.001219821 seconds time elapsed
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20190314225002.30108-9-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-xggjvwcdaj2aqy8ib3i4b1g6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.
This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.
Also it actually makes the code little simpler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CoreSight was the only client of the PMU's set_drv_config() API. Now
that it is no longer needed by CoreSight remove it from the code base.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20190131184714.20388-8-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
