release resources allocated in mode_set if any of
the hw check fails. Most of these checks are not
necessary and they will be removed in the follow up
patches with state based resource allocations.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Both video and command physical encoders will have
a hw interface assigned to it. So there is really no
need to track the hw block in specific encoder subclass.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-2-git-send-email-jsanka@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The frame_busy mask is used in frame_done event handling, which is not
invoked for async commits. So an async commit will leave the
frame_busy mask populated after it completes and future commits will start
with the busy mask incorrect.
This showed up on disable after cursor move. I was hitting the "this should
not happen" comment in the frame event worker since frame_busy was set,
we queued the event, but there were no frames pending (since async
also doesn't set that).
Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the case of an async/cursor update, we don't wait for the frame_done
event, which means handle_frame_done is never called, and the frame_done
watchdog isn't canceled. Currently, this results in a frame_done timeout
every time the cursor moves without a synchronous frame following it up
before the timeout expires. Since we don't wait for frame_done, and
don't handle it, we shouldn't modify the watchdog.
Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-4-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
There exists a bunch of confusion as to what the actual units of
frame_done is:
- The definition states it's in # of frames
- CRTC treats it like it's ms
- frame_done_timeout comment thinks it's Hz, but it stores ms
- frame_done timer is setup such that it _should_ be in frames, but the
timeout is super long
So this patch tries to interpret what the driver really wants. I've
de-centralized the #define since the consumers are expecting different
units.
For crtc, we just use 60ms since that's what it was doing before.
Perhaps we could get fancy and scale with vrefresh, but that's for
another time.
For encoder, fix the comments and rename frame_done_timeout so it's
obvious what the units are. In practice, frame_done_timeout is really
just checked against 0 || !0, which I guess is why the units being wrong
didn't matter. I've also dropped the timeout from the previous 60 frames
to 5. That seems like more than enough time to give up on a frame, and
my guess is that no one intended for the timeout to _actually_ be 60
frames.
Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-3-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
Instead of setting the timeout and then immediately reading it back
(along with the hand-rolled msecs_to_jiffies calculation), just
calculate it once and set it in both places at the same time.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-2-sean@poorly.run
Signed-off-by: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The contents of struct encoder_kickoff_params are never used. Remove the
structure and all remnants of it from function calls.
Changes in v2 (seanpaul):
- Actually remove the struct (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
msm is using msm wq for dispatching commit and vblank
events. Switch idle power collapse feature also to use
msm wq to handle delayed work handlers so that
msm can get rid of redundant display threads.
changes in v2:
- patch introduced in v2
changes in v3:
- none
changes in v4:
- use msm wq for delayed works
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Correct definition of both formats by swapping red
and blue channels
v3: update commit message
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove unused functions and macros from files handling
dpu hardware interrupts.
changes in v2:
Removed clear_interrupt_status (Jordan Crouse)
changes in v3:
Changed commit text
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove unused functions from dpu plane interface
and unused variables from dpu plane state structure.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Remove enum dpu_iommu_domain from dpu mdss as its unused.
Remove unnecessary comment for variable which is already
removed.
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Bail out KMS hw init on display initialization failures with
proper error logging.
changes in v3:
- introduced in the series
changes in v4:
- avoid duplicate return on errors (Sean Paul)
- avoid spamming errors on failures (Jordon Crouse)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Devices that make up DPU, i.e. graphics card, request their interrupts
from this "virtual" interrupt chip. The interrupt chip builds upon a GIC
SPI interrupt that raises high when any of the interrupts in the DPU's
irq status register are triggered. From the kernel's perspective this is
a chained irq chip, so requesting a flow handler for the GIC SPI and
then calling generic IRQ handling code from that irq handler is not
completely proper. It's better to convert this to a chained irq so that
the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU
affinity changed, and won't be accounted for with irq stats. Doing this
also silences a recursive lockdep warning because we can specify a
different lock class for the chained interrupts, silencing a warning
that is easy to see with 'threadirqs' on the kernel commandline.
WARNING: inconsistent lock state
4.19.10 #76 Tainted: G W
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes:
0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x244/0x360
_raw_spin_lock+0x64/0xa0
handle_fasteoi_irq+0x54/0x2ec
generic_handle_irq+0x44/0x5c
__handle_domain_irq+0x9c/0x11c
gic_handle_irq+0x208/0x260
el1_irq+0xb4/0x130
arch_cpu_idle+0x178/0x3cc
default_idle_call+0x3c/0x54
do_idle+0x1a8/0x3dc
cpu_startup_entry+0x24/0x28
rest_init+0x240/0x270
start_kernel+0x5a8/0x6bc
irq event stamp: 18
hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0
hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc
softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964
softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
<Interrupt>
lock(&irq_desc_lock_class);
*** DEADLOCK ***
no locks held by irq/40-dpu_mdss/203.
stack backtrace:
CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76
Call trace:
dump_backtrace+0x0/0x2f8
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xcc/0x10c
mark_lock+0xbe0/0xe24
__lock_acquire+0x4cc/0x2708
lock_acquire+0x244/0x360
_raw_spin_lock+0x64/0xa0
handle_level_irq+0x34/0x26c
generic_handle_irq+0x44/0x5c
dpu_mdss_irq+0x64/0xec
irq_forced_thread_fn+0x58/0x9c
irq_thread+0x120/0x1dc
kthread+0x248/0x260
ret_from_fork+0x10/0x18
------------[ cut here ]------------
irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jayant Shekhar <jshekhar@codeaurora.org>
Cc: Rajesh Yadav <ryadav@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
hw_mdp block is common for displays. No need
to reserve per display.
changes in v2:
- use IS_ERR for error checking (Jordan Crouse)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
struct dpu_hw_blk has hw block type info. Remove duplicate
type tracking in struct dpu_rm_hw_blk.
changes in v2:
- remove redundant type in trace api's (Sean Paul)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Not actively used. Clean up the crtc mixer struct.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Definition was removed already. Clean up header declaration.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Not used. Remove from RM.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
RM was equipped with reservation tracking structure RSVP
to cache HW reservation of displays for certain clients
where atomic_checks (atomic commit with TEST_ONLY) for all
the displays are called before their respective atomic_commits.
Since DPU doesn't support the sequence anymore, clean up
the support from RM. Replace rsvp with the corresponding
encoder id to tag the HW blocks reserved. It prepares DPU
to get rid of RM altogether and track reservations using
private states.
changes in v2:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
allow_fb_modifiers needs to be set before drm_universal_plane_init
is called.
Signed-off-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Simplify the initilization of a list of formats
by passing the list in directly instead of copying
it from one structure to another.
Signed-off-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea7 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea7 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.
There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.
Add include of drm_util.h to all users.
v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
function should not be used in new code (Daniel)
v3:
- Fix kernel-doc syntax (Daniel)
- Plug drm_util.h into drm-internels.rst (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXDOTqAAKCRDj7w1vZxhR
xZ8QAQD4j8m9Ea3bzY5Rr8BYUx1k+Cjj6Y6abZmot2rSvdyOHwD+JzJFIFAPZjdd
uOKhLnDlubaaoa6OGPDQShjl9p3gyQE=
=WQGO
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
- Turn dma-buf fence sequence numbers into 64 bit numbers
Core Changes:
- Move to a common helper for the DP MST hotplug for radeon, i915 and
amdgpu
- i2c improvements for drm_dp_mst
- Removal of drm_syncobj_cb
- Introduction of an helper to create and attach the TV margin properties
Driver Changes:
- Improve cache flushes for v3d
- Reflection support for vc4
- HDMI overscan support for vc4
- Add implicit fencing support for rockchip and sun4i
- Switch to generic fbdev emulation for virtio
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: applied amdgpu merge fixup]
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
In case of msm drm bind failure, pm runtime put sync
is called from dsi driver which issues an asynchronous
put on mdss device. Subsequently when dpu_mdss_destroy
is triggered the change will make sure to put the mdss
device in suspend and clearing pending work if not
scheduled.
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Do some cleanup in the static inline functions defined in
dpu_media_info.h by cleaning up gotos and unneeded local
variables.
v3: Added spaces between operators per Seal Paul and Sam Ravnborg
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove more static inline functions that are lightly used and/or
very simple and easy to build into the calling functions.
v3: Fix a nit from Sean Paul
v2: Removed another unused function from dpu_hw_lm.c and add back
dpu_crtc_get_client_type() since there was a question regarding
its usefulness.
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Do some debugfs cleanups from across the DPU driver. The DRM
destroy functions will do a recursive delete on the entire
debugfs node so there is no need to store dentry pointers for
the debugfs files that are persistent for the life of the
driver. This also means that the destroy functions can go
away too.
Also, use standard API functions where applicable instead of
using hand written code.
v3: No changes
v2: Add more code; most of the dpu debugfs files should be
addressed now.
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu_irq.c does some unneeded checks and passes control
to dpu_core_irq.c The simple functions can be defined
in the same file where we use them and the files and
their associated hangers on can be deleted.
Additionally the postinstall hook isn't used even
in dpu_core_irq.c so zap that entire path.
v3: No changes
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Outside of superfluous parameter checks the dpu_hw_blk_init()
doesn't have any failure paths. Switch it over to be a void
function and we can remove error handling paths in all the functions
that call it. While we're in those functions remove unneeded
initialization for a static variable.
v3: No changes
v2: Removed a cleanup intended for a different patch
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove some unused container_of() helper functions.
v3: No changes
v2: Retained still used helper functions in the name of readability
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The static inline function dpu_crtc_enabled() is only called once
and the function that calls it in turn is only called once and
the return value can be easily checked in the calling functions
so collapse everything down.
v3: No changes
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu_crtc_get_mixer_height() is only used once and the value it
returns can be easily derived from the calling function.
v3: No changes
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The functions in dpu_dbg.c aren't used. The two main dump functions
fail after a lookup from dpu_dbg_base.reg_base_list which turns out
to never be populated and once those are removed the rest of the
file doesn't make any sense.
v3: No changes
v2: Moved some unrelated changes to another patch
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Each time it's called we're holding the crtc modeset lock, so it's
redundant.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's just for debugfs output, we don't need it
Changes in v2:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of assigning/clearing the crtc on vblank enable/disable, we can
just assign and clear the crtc on modeset. That allows us to just toggle
the encoder's vblank interrupts on vblank_enable.
So why is this important? Previously the driver was using the legacy
pointers to assign/clear the crtc. Legacy pointers are cleared _after_
disabling the hardware, so the legacy pointer was valid during
vblank_disable, but that's not something we should rely on.
Instead of relying on the core ordering the legacy pointer assignments
just so, we'll assign the crtc in dpu_crtc enable/disable. This is the
only place that mapping can change, so we're covered there.
We're also taking advantage of drm_crtc_vblank_on/off. By using this, we
ensure that vblank_enable/disable can never be called while the crtc is
off (which means the assigned crtc will always be valid). As such, we
don't need to use modeset locks or the crtc_lock in the
vblank_enable/disable routine to be sure state is consistent.
...I think.
Changes in v2:
- Changed crtc check in toggle_vblank to != (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[dpu_crtc.c change needed to be manually applied b/c of the dpu_crtc_reset change]
Signed-off-by: Rob Clark <robdclark@gmail.com>
The drm_crtc_vblank_on/off calls in enable/disable guarantee that we
won't call this function when crtc is not enabled.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Matches dpu_crtc_enable and we'll need the old state in a future patch
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The indirection of registering a callback and opaque pointer isn't reall
useful when there's only one callsite. So instead of having the
vblank_cb registration, just give encoder a crtc and let it directly
call the vblank handler.
In a later patch, we'll make use of this further.
Changes in v2:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
I think the intention here was to protect the enc->crtc access, but
that's insufficient to avoid enc->crtc changing. Fortunately we're
already holding the modeset lock when this is called (from
atomic_check), so remove the crtc_lock and add a modeset lock check.
While we're at it, use the encoder mask from crtc state instead of
legacy pointer.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
There are 4 times that _dpu_crtc_vblank_enable_no_lock() is called:
1- crtc enable
2- crtc disable
3- crtc vblank enable
4- crtc vblank disable
When we enable or disable the crtc, we call drm_crtc_vblank_on and
drm_crtc_vblank_off respectively. That will gate vblank enables and
disables to only being called when the crtc is active. That means that
we can just enable/disable pm runtime in crtc enable/disable. This will
be beneficial in trying to eliminate blocking calls from the vblank call
chain.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add modeset lock checks to functions that could be called outside the
core atomic stack.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's for legacy drivers, for atomic drivers crtc->state->encoder_mask
should be used to map encoder to crtc.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict with async param of dpu_encoder_kickoff]
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch wraps dpu_core_perf_crtc_release_bw() with modeset locks
since it digs into the state objects.
Changes in v2:
- None
Changes in v3:
- Use those nifty new DRM_MODESET_LOCK_ALL_* helpers (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Now that runtime resume is handled in encoder, we don't need to worry
about crtc_lock recursion when calling pm_runtime_(get|put). So drop the
lock drops in _dpu_crtc_vblank_enable_no_lock().
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The crtc runtime resume doesn't actually operate on the crtc, but rather
its encoders. The problem with this is that we need to inspect the crtc
state to get the currently connected encoders. Since runtime resume
isn't guaranteed to be called while holding the modeset locks (although
it sometimes is), this presents a race condition.
Now that we have ->enabled on the virtual encoders, and a lock to
protect it, just call resume on each encoder and only restore the ones
that are enabled.
Changes in v2:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a bool to dpu_encoder_virt to track whether the encoder is enabled
or not. Repurpose the enc_lock mutex to ensure that it is consistent
with the hw state.
Changes in v2:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
enc_spinlock instead of enc_spin_lock.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Now that we don't have any event handlers, remove dpu_power_handle!
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's only used in core_perf, so stick it there (and change the name to
reflect that).
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's needed for struct dss_module_power, and is currently being pulled
in by dpu_power_handle.h
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's unused
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of registering through dpu_power_handle just to get a call on
runtime_resume, call the crtc function directly.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
power_events are only used for pm_runtime, and that's all handled in
dpu_kms. So just call vbif_init_memtypes at the correct times.
Changes in v2:
- Removed obsolete comment (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
There's only one client -- core, and it's only used for runtime pm which
is already refcounted.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's only used for debugfs, so just output the enum value instead.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since dpu_crtc subclasses crtc_state, we need a custom .reset hook in
order to allocate the right amount of memory to accommodate the
additional struct members in dpu_crtc_state. So bring it [partially]
back.
Relevant KASAN splat:
[ 10.333382] ==================================================================
[ 10.344288] BUG: KASAN: slab-out-of-bounds in kmemdup+0x50/0x80
[ 10.350390] Read of size 736 at addr ffffffc0d9f06080 by task frecon/394
[ 10.358861] CPU: 6 PID: 394 Comm: frecon Tainted: G W 4.19.4 #121
[ 10.366476] Hardware name: Google Cheza (rev2) (DT)
[ 10.371514] Call trace:
[ 10.374087] dump_backtrace+0x0/0x194
[ 10.377878] show_stack+0x20/0x28
[ 10.381330] dump_stack+0xa0/0xc8
[ 10.384783] print_address_description+0x78/0x2e0
[ 10.389639] kasan_report+0x290/0x2d0
[ 10.393428] check_memory_region+0x20/0x14c
[ 10.397740] __asan_loadN+0x14/0x1c
[ 10.401345] kmemdup+0x50/0x80
[ 10.404524] dpu_crtc_duplicate_state+0x58/0xa0
[ 10.409228] drm_atomic_get_crtc_state+0xac/0x178
[ 10.414095] __drm_atomic_helper_set_config+0x54/0x4a4
[ 10.419393] drm_atomic_helper_set_config+0x60/0xb4
[ 10.424435] drm_mode_setcrtc+0x720/0x760
[ 10.428570] drm_ioctl_kernel+0xd8/0x13c
[ 10.432617] drm_ioctl+0x380/0x4f4
[ 10.436150] drm_compat_ioctl+0x54/0x13c
[ 10.440219] __arm64_compat_sys_ioctl+0x1d8/0xef4
[ 10.445086] el0_svc_common+0xd8/0x138
[ 10.448961] el0_svc_compat_handler+0x58/0x68
[ 10.453463] el0_svc_compat+0x8/0x18
[ 10.458712] Allocated by task 56:
[ 10.462148] kasan_kmalloc.part.4+0x48/0xf4
[ 10.466465] kasan_kmalloc+0x8c/0xa0
[ 10.470165] kmem_cache_alloc_trace+0x25c/0x27c
[ 10.474848] drm_atomic_helper_crtc_reset+0x68/0x98
[ 10.479877] drm_mode_config_reset+0xc4/0x19c
[ 10.484383] msm_drm_bind+0x814/0x8dc
[ 10.488169] try_to_bring_up_master.part.7+0x48/0xac
[ 10.493282] component_master_add_with_match+0x158/0x198
[ 10.498758] msm_pdev_probe+0x328/0x348
[ 10.502736] platform_drv_probe+0x74/0xc8
[ 10.506877] really_probe+0x1ac/0x35c
[ 10.510659] driver_probe_device+0xd4/0x118
[ 10.514975] __device_attach_driver+0xc8/0xf4
[ 10.519477] bus_for_each_drv+0xb4/0xe4
[ 10.523439] __device_attach+0xd0/0x158
[ 10.527394] device_initial_probe+0x24/0x30
[ 10.531715] bus_probe_device+0x50/0xe4
[ 10.535681] deferred_probe_work_func+0xac/0xdc
[ 10.540376] process_one_work+0x3f0/0x6d4
[ 10.544521] worker_thread+0x3f4/0x520
[ 10.548399] kthread+0x1b4/0x1c8
[ 10.551740] ret_from_fork+0x10/0x18
[ 10.556986] Freed by task 0:
[ 10.559967] (stack is not available)
[ 10.565216] The buggy address belongs to the object at ffffffc0d9f06080
which belongs to the cache kmalloc-1024 of size 1024
[ 10.578268] The buggy address is located 0 bytes inside of
1024-byte region [ffffffc0d9f06080, ffffffc0d9f06480)
[ 10.590248] The buggy address belongs to the page:
[ 10.595195] page:ffffffbf0367c000 count:1 mapcount:0 mapping:ffffffc0de40f680 index:0x0 compound_mapcount: 0
[ 10.605321] flags: 0x4000000000008100(slab|head)
[ 10.610100] raw: 4000000000008100 ffffffbf0369fa08 ffffffbf0367f008 ffffffc0de40f680
[ 10.618077] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[ 10.626049] page dumped because: kasan: bad access detected
[ 10.633341] Memory state around the buggy address:
[ 10.638282] ffffffc0d9f06180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 10.645710] ffffffc0d9f06200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 10.653139] >ffffffc0d9f06280: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
[ 10.660571] ^
[ 10.665774] ffffffc0d9f06300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 10.673210] ffffffc0d9f06380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 10.680639] ==================================================================
Fixes: a6ba45afda41 (drm/msm/dpu: Replace dpu_crtc_reset by atomic helper)
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This allows controlling which of the 8 lanes are used for 6 bit color.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch sprinkles a few async/legacy_cursor_update checks
through commit to ensure that cursor updates aren't blocked on vsync.
There are 2 main components to this, the first is that we don't want to
wait_for_commit_done in msm_atomic before returning from atomic_complete.
The second is that in dpu we don't want to wait for frame_done events when
updating the cursor.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
There exists a case where a flush of a plane/dma may have been triggered
& started from an async commit. If that plane/dma is subsequently disabled
by the next commit, the flush register will continue to hold the flush
bit for the disabled plane. Since the bit remains active,
pending_kickoff_cnt will never decrement and we'll miss frame_done
events.
This patch limits the check of flush_register to include only those bits
which have been updated with the latest commit.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In case of msm drm bind failure, dpu_mdss_destroy is triggered.
In this function, resources are freed and pm runtime disable is
called, which triggers dpu_mdss_disable. Now in dpu_mdss_disable,
driver tries to access a memory which is already freed. This
results in kernel panic. Fix this by ensuring proper sequence
of dpu destroy and disable calls.
Changes in v2:
- Removed double spacings [Jeykumar]
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add the mdp5_cfg_hw entry for MDP5 version v1.15 found on msm8917.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
For allocation in contiguous memory when the GPU has MMU but not mdp4.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a reference count to track how many times a particular
chunk of iova memory is pinned (mapped) in the iomu and
add msm_gem_unpin_iova to give up references.
It is important to note that msm_gem_unpin_iova replaces
msm_gem_put_iova because the new implicit behavior
that an assigned iova in a given vma is now valid for the
life of the buffer and what we are really focusing on is
the use of that iova.
For now the unmappings are lazy; once the reference counts
go to zero they *COULD* be unmapped dynamically but that
will require an outside force such as a shrinker or
mm_notifiers. For now, we're just focusing on getting
the counting right and setting ourselves up to be ready
for the future.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a new function to get and pin the iova memory in one
step (basically renaming the old msm_gem_get_iova function)
and switch msm_gem_get_iova() to only allocate an iova but
not map it in the IOMMU. This is only currently used by
msm_ioctl_gem_info() since all other users of of the iova
expect that the memory be immediately available.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Specify geometry for DPU iommu domain which sets
the address space for gem allocations.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Suggested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate
drm-formatted specific log messages so that it will be easy to
differentiate in case of multiple instances of driver.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
They're not needed.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Local variable is not needed and condition can't be hit.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
I noticed an empty label while driving by and decided to use
coccinelle to see if there were any more. Here's the spatch and the
invocation:
---
@@
identifier lbl;
expression E;
@@
- goto lbl;
+ return E;
...
- lbl:
return E;
@@
identifier lbl;
@@
- goto lbl;
+ return;
...
- lbl:
- return;
---
spatch --allow-inconsistent-paths --sp-file file.spatch --dir
drivers/gpu/drm/msm/disp/dpu1 --in-place
---
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Per chapter 15 of coding-style, removing 'inline' keyword from functions
that are larger than a typical macro. In a couple of cases I've
simplified the function and kept the inline.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's unused, remove it.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
These functions aren't used anywhere, remove them.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We call out of the virt encoder into phys only to call back into the
virt for hw reset. So remove the indirection and just call the virt
function directly.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since we removed all suspend logic from the crtc code (see patch 3/4),
dpu_crtc_reset does the same things as drm_atomic_helper_crtc_reset, so let's
just replace it with a call to the atomic helper.
v3: added patch to patchset
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since drm core's modeset locks serialize atomic commits, we don't need to
track whether or not we're in a suspended state from inside the crtc for
dpu_crtc_enable/disable. This patch removes the suspend logic from the crtc and
removes the relevant tracing from dpu_trace. Since we removed all calls
to dpu_kms_is_suspend_state, we can remove that function and the
suspend_state field of dpu_kms as well.
v2: added patch to patchset
v3: reworded commit body and moved deletion of dpu_kms_is_suspend_state and
suspend_state to this patch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
PM resume was crashing during dpu_kms_pm_resume. This patch removes
dpu_kms_pm_suspend/resume so that msm_pm_suspend/resume uses the atomic
helpers instead (see next patch). This patch also removes
dpu_kms_is_suspend_blocked since it is never called.
v2: Reorganized patches in patchset
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
I found these tracepoints useful for debugging cursor/ctl, someone else
might find them useful too
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Alpha enable in the pixel format will help in
selecting the blend rule. By keeping alpha enable
to true we are allowing foreground alpha to blend
with the layer. If alpha is don't care, then we
should not allow pixel alpha to be part of blend
equation.
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
'dpu_enc' is a member of 'drm_enc'
And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init.
This gives this error message:
./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6:
WARNING: invalid free of devm_ allocated data
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
It causes a WARN in drm_atomic_get_plane_state(), and is not used by
atomic (or dpu).
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=UV0m
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21, part 1:
UAPI Changes:
- Add syncobj timeline support to drm.
Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.
Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.
Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=3yxi
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>
We are currently leaking a drm_crtc_commit struct for every atomic
commit containing plane state. The dpu plane destroy function cleans up
the fb reference manually, but fails to release the commit ref. As a
result, we just keep allocating drm_crtc_commits without ever freeing
them. Fortunately there's a helper function which will clean up all of
our mess at once, so use that.
Thanks to Doug Anderson for reporting the memory leak (and leaving
breadcrumbs from kmemleak!).
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:
kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)
Signed-off-by: Kees Cook <keescook@chromium.org>
drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).
Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rajesh Yadav <ryadav@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-12-daniel.vetter@ffwll.ch
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The return from the call to _mixer_stages can be a negative error
code however this is being assigned to an unsigned variable 'stages'
hence the check is always false. Fix this by making 'stages' an
int.
Detected by Coccinelle ("Unsigned expression compared with zero:
stages < 0")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
cur_master in dpu_encoder is assigned at modeset and cleared on
.disable(). Unfortunately dpms (or enable/disable) does not guarantee a
modeset, so cur_master is NULL when we try to re-enable it.
This patch moves the NULL assignment to setup_display where it will be
re-assigned later in the function.
Tested-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove unneeded checks from _dpu_plane_get_aspace.
v3: change _dpu_plane_get_aspace to return a struct
*msm_gem_address_space instead passing in a pointer of the same
type to edit. Remove uneeded arguments.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removed all impossible checks from the function, which eliminates
the need for a return value. This function is also never used
outside of dpu_plane.c, so the function is made static.
v3: Using helper function _dpu_plane_get_kms() instead of doing
it locally.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes redundant tests for _dpu_crtc_vblank_enable_no_lock.
Function return type is now void and all function calls have
been changed accordingly.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
All checks for _dpu_crtc_power_enable are not true, so the function
can never return an error code. This removes the need for the
function as pm_runtime functions can be used instead.
v3: Separated _dpu_crtc_power_enable into _dpu_crtc_power_enable and
_dpu_crtc_power_disable for clarity.
v4: Removed both _dpu_crtc_power_enable and _dpu_crtc_power_disable
and called pm_runtime_get_sync and pm_runtime_put_sync from all
call points
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes impossible checks in dpu_crtc.c.
Variable assignments are moved up to be initializations where
possible. Some variables are no longer used, these are removed.
v3: reverted back to original patch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes unnecessary checks from dpu_plane_atomic_disable, old_state
argument for both dpu_plane_atomic_disable and
dpu_plane_sspp_atomic_update is removed as it is no longer used.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes some checks from dpu_plane.c that will never result in an error.
Subsequent variable assignments become part of the initialization wherever
possible. Unused variables are removed.
v3: removed additional impossible checks and called helper function
_dpu_plane_get_kms() where possible.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
TP_printk is not synchronous, so storing pointers and then later
dereferencing them is a Bad Idea. This patch stores everything locally to
avoid display stomped memory.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
[seanpaul fixed up commit msg typo on apply]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's useful to know which bits of the flush come from extra_flush_bits
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We're printing the frame_busy_mask in a trace, but after it's been
cleared. This, as it turns out, is pretty pointless.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
There's no benefit in falling out of the if, just return directly.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
All of the checks in dpu_plane_sspp_atomic_update() are impossible, so
remove them and make the function void. This removes the need to error
check in dpu_plane_atomic_update(). Additionally, remove impossible checks
in dpu_plane_atomic_update().
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
plane->state->visible encompasses all of these checks and more, so we
can just check visible.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's doing the same thing dpu_plane_enabled() is.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu_plane_atomic_check() is a very thin wrapper around
dpu_plane_sspp_atomic_check(). All it does is a NULL-check of state->fb,
which is already done by drm_atomic_helper_check_plane_state(). Further,
the helper sets state->visible = false when this is true. So remove
dpu_plane_atomic_check() and just use dpu_plane_sspp_atomic_check()
directly.
Changes in v2:
- Fix spelling mistake in Subject (Jeykumar)
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
src/dst rects are checked in both atomic_check and atomic_update, with
the more comprehensive check occurring in atomic_update, which is
backwards. So consolodate the checks in atomic_check.
Changes in v2:
- Use the correct crtc state (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch removes some checks which are impossible to hit. As a result,
we can move some of the local var assignments into the declarations.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
enum dpu_ad isn't used and can be safely removed.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
RM maintained a redundant definition for display topology
to identify the no. of hw blocks needed for a display
and their hardware dependencies. This information can be
implicitly deduced from the msm_display_topology structure
available in RM reserve request. In addition to getting
rid of the redundant topology, this change also removes
the topology name enums and their usages.
changes in v4:
- remove the topology name enum entirely (Sean)
changes in v5:
- remove RM topology definition and their
references (Sean)
- Implement helper for dual mixer CRTC (Sean)
changes in v6:
- avoid heap memory for topology (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU, being over protective, validates every parameter of a
module. This change traces the call stack for some of encoder
functions affected by previous set of clean up patches and
cleans up unwanted validations.
changes in v5:
- Introduced in the series
changes in v6:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Connector states were passed around RM to update the custom
topology connector property with chosen topology data. Now that
we got rid of both custom properties and topology names, this
change cleans up the mechanism to pass connector states across
RM helpers and encoder functions.
changes in v5:
- Introduced in the series
changes in v6:
- remove parameter checking in rm reserve (Jordan)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Encoder H_TILE values are not used for allocating the hw blocks.
no. of hw_intf blocks provides the info.
changes in v4:
- remove irrelevant changes (Sean)
- retain log macros (Sean)
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU had the support to LOCK the hw resources in
atomic check and CLEAR the locked resources explicitly
through custom property values. Now that DPU is
stripped off of all the custom properties, the RM
handlers for this feature will be no-op's. This change
gets rid of all its references.
changes in v5:
- Introduced in the series.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Support for CDM block is not present in DPU. Remove CDM
handlers from resource manager.
changes in v4:
- Introduced in the series
changes in v5:
- Remove catalog references to CDM (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Destination scaling(DS) is a Snapdragon hardware feature to
scale up the display ROI after layer blending. DPU driver doesn't
support programming of DS blocks yet. This change cleans up the
residual code present in catalog and RM for DS block handling.
Support for the same can be added back when the feature is
formally implemented.
changes in v5:
- introduced in the series
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rename hw_ctl to lm_ctl to mean the ctl associated
with the hw layer mixer block.
sed -i 's/\([*@.>]\)hw_ctl\([^s]\)/\1lm_ctl\2/g' dpu_crtc.c dpu_crtc.h
changes in v4:
- Specifiy shell command used for renaming (Sean)
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Prep changes for state based resource management.
Moves all the hw block tracking for the crtc to the state
object.
changes in v4:
- Serialize crtc state access in debugfs handlers (Sean)
- Split the crtc width query as a separate change (Sean)
changes in v5:
- mode set lock all before crtc state access (Sean)
- remove unwanted memset for hw mixer cache (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Mark CRTC get_mixer_width helper API static as it is
not used outside the file.
changes in v4:
- Patch introduced in the series
changes in v5:
- Simplify the inline function (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Resource manager assigns hw_intf blocks for the encoder only on
modeset. If queried for hw_intf objects during init, it will be
NULL. Since hw_intf objects are needed only after encoder enable,
defer the query to encoder enable which will be triggered after
modeset.
changes in v4:
- Add details on commit text on why the change is needed (Sean)
changes in v5:
- Reword commit text on the usage of hw_intf objects (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In virtual encoder modeset, DPU makes RM request to assign hw blocks
for the display. It is also expected in modeset to iterate and
associate the physical encoders with their relevant hw blocks.
Ping pong blocks are already handled here but hw ctl blocks are not.
This change moves the hw_ctl iteration and mapping from physical
encoder to virtual encoder.
changes in v4:
- Fix hw_ctl initialization (Sean)
changes in v5:
- Update commit text with details on why the change is
needed (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Avoid querying RM for hw mdp block. Use the one
stored in KMS during initialization.
changes in v4:
- none
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Identify slave-master encoders during initialization and enable
the encoders explicitly as the current logic has redundant and
ambiguous loops.
changes in v4:
- identify master/slave encoder while adding
adding physical encoders(Sean)
changes in v5:
- get rid of temporary variable for phys enc(Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
removes left out variables of previous ping pong
split topology cleanup.
changes in v4:
- none
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
resource pool manager utility was introduced to manage
rotator sessions. Removing the support as the rotator
feature doesn't exist.
changes in v4:
- none
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
cleans up left out scalar config definitions from headers
changes in v4:
- none
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU power handler maintained PRE/POST versions of power
ENABLE/DISABLE events to accommodate tasks which need be
handled before/after data bus voting. But since the bus voting
API's are deprecated and removed from the driver, squash
the events and their clients respective event handlers
to handle only ENABLE/DISABLE events.
changes in v5:
- introduced in the series
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul converted #defines to BIT(x) in dpu_power_handle.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
MISR support is the debug feature present in Snapdragon chipsets.
At the layer mixer and interfaces, MISR algorithm can generate CRC
signatures of the pixel data which can be used for validating
the frames generated. Since there are no clients for this feature,
strip down the support from the driver.
changes in v4:
- changed introduced in the series
changes in v5:
- update commit text with the need for the change(Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The MDSS device is created before the MSM driver attempts to bind the
sub components. If any of the components return -EPROBE_DEFER the MDSS
device is destroyed and tried again later.
If this happens the dpu_mdss_isr interrupt created from the DPU MDSS
is not freed when the MDSS device is destroyed and has a risk of
triggering later and hitting a fault by accessing a mmio region that
no longer exists. Even if the interrupt isn't triggered by
accident when the device attempts to reprobe it would error out
when it tries to re-register the interrupt so unconditionally removing
it in the destroy is the right move.
Switch the device managed dpu_mdss_isr to be unmanaged and add a
free_irq() in the mdss destroy function.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The atomic_check is a bit too aggressive with respect to planes which
leave the active area. This caused a bunch of log spew when the cursor
got to the edge of the screen and stopped it from going all the way.
This patch removes the conservative bounds checks from atomic and clips
the dst rect such that we properly display planes which go off the
screen.
Changes in v2:
- Apply the clip to src as well (taking into account scaling)
Changes in v3:
- Use drm_atomic_helper_check_plane_state() to clip src/dst
Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
With patch [1], DPU is broken since it continues to use
incorrect connector_type to identify the display type. Update
DPU to use the encoder type to get the info.
[1] https://patchwork.kernel.org/patch/10568269/
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This change gets rid of unwanted connector-encoder type
mapping used for dsi-staging driver. Now that DPU will
be using upstream DSI driver, remove the stale code.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove stale display port programming. It can be
added back with DPU support for display port.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The current driver has the opaque blend mode set as the
default causing the black box effect around the cursor.
The fix enables choosing a different blend mode for alpha
enabled formats.
Changes in V2:
- Use drm_get_format_name() in the logs (Sean)
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reserve DMA pipe for cursor plane and attach it to the
crtc during the initialization.
Changes in V2:
None
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We got a bug report that this function oopses when trying to do a kasprintf().
PC is at string+0x2c/0x60
LR is at vsnprintf+0x28c/0x4ec
pc : [<ffffff80088d35d8>] lr : [<ffffff80088d5fc4>] pstate: a0c00049
sp : ffffff80095fb540
x29: ffffff80095fb540 x28: ffffff8008ad42bc
x27: 00000000ffffffd8 x26: 0000000000000000
x25: ffffff8008c216c8 x24: 0000000000000000
x23: 0000000000000000 x22: ffffff80095fb720
x21: 0000000000000000 x20: ffffff80095fb720
x19: ffffff80095fb6f0 x18: 000000000000000a
x17: 00000000b42ba473 x16: ffffff800805bbe8
x15: 00000000000a157d x14: 000000000000000c
x13: 0000000000000000 x12: 0000ffff0000000f
x11: 0000000000000003 x10: 0000000000000001
x9 : 0000000000000040 x8 : 000000000000001c
x7 : ffffffffffffffff x6 : 0000000000000000
x5 : 0000000000000228 x4 : 0000000000000000
x3 : ffff0a00ffffff04 x2 : 0000000000007961
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/3:1 (pid: 61, stack limit = 0xffffff80095f8000)
Call trace:
Exception stack(0xffffff80095fb400 to 0xffffff80095fb540)
b400: 0000000000000000 0000000000000000 0000000000007961 ffff0a00ffffff04
b420: 0000000000000000 0000000000000228 0000000000000000 ffffffffffffffff
b440: 000000000000001c 0000000000000040 0000000000000001 0000000000000003
b460: 0000ffff0000000f 0000000000000000 000000000000000c 00000000000a157d
b480: ffffff800805bbe8 00000000b42ba473 000000000000000a ffffff80095fb6f0
b4a0: ffffff80095fb720 0000000000000000 ffffff80095fb720 0000000000000000
b4c0: 0000000000000000 ffffff8008c216c8 0000000000000000 00000000ffffffd8
b4e0: ffffff8008ad42bc ffffff80095fb540 ffffff80088d5fc4 ffffff80095fb540
b500: ffffff80088d35d8 00000000a0c00049 ffffff80095fb550 ffffff80080d06a4
b520: ffffffffffffffff ffffff80088d5e0c ffffff80095fb540 ffffff80088d35d8
[<ffffff80088d35d8>] string+0x2c/0x60
[<ffffff80088d5fc4>] vsnprintf+0x28c/0x4ec
[<ffffff80083973b8>] kvasprintf+0x68/0x100
[<ffffff800839755c>] kasprintf+0x60/0x80
[<ffffff800849cc24>] drm_encoder_init+0x134/0x164
[<ffffff80084d9a7c>] dpu_encoder_init+0x60/0x94
[<ffffff80084eced0>] _dpu_kms_drm_obj_init+0xa0/0x424
[<ffffff80084ed870>] dpu_kms_hw_init+0x61c/0x6bc
[<ffffff80084f7614>] msm_drm_bind+0x380/0x67c
[<ffffff80085114e4>] try_to_bring_up_master+0x228/0x264
[<ffffff80085116e8>] component_master_add_with_match+0x90/0xc0
[<ffffff80084f722c>] msm_pdev_probe+0x260/0x2c8
[<ffffff800851a910>] platform_drv_probe+0x58/0xa8
[<ffffff80085185c8>] driver_probe_device+0x2d8/0x40c
[<ffffff8008518928>] __device_attach_driver+0xd4/0x10c
[<ffffff800851644c>] bus_for_each_drv+0xb4/0xd0
[<ffffff8008518230>] __device_attach+0xd0/0x160
[<ffffff8008518984>] device_initial_probe+0x24/0x30
[<ffffff800851744c>] bus_probe_device+0x38/0x98
[<ffffff8008517aac>] deferred_probe_work_func+0x144/0x148
[<ffffff80080c8654>] process_one_work+0x218/0x3bc
[<ffffff80080c883c>] process_scheduled_works+0x44/0x48
[<ffffff80080c95bc>] worker_thread+0x288/0x32c
[<ffffff80080cea30>] kthread+0x134/0x13c
[<ffffff8008084750>] ret_from_fork+0x10/0x18
Code: 910003fd 2a0403e6 eb0400ff 54000060 (38646845)
Looking at the code I see that drm_encoder_init() is called from the DPU
code with 'DRM_MODE_CONNECTOR_DSI' passed in as the 'encoder_type'
argument (follow from _dpu_kms_initialize_dsi()). That corresponds to
the integer 16. That is then indexed into drm_encoder_enum_list in
drm_encoder_init() to look up the name of the encoder. If you're still
following along, that's an encoder not a connector! We really want to
use DRM_MODE_ENCODER_DSI (integer 6) instead of DRM_MODE_CONNECTOR_DSI
here, or we'll go out of bounds of the encoder array. Pass the right
thing and everything is fine.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 25fdd5933e (drm/msm: Add SDM845 DPU support)
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
This change validates the physical encoder before it
is dereferenced.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Trivial fix to spelling mistake in error messages
"diable" -> "disable"
"cliend" -> "client"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Mark a number of static functions that are only unsed in the file
that defines them and remove the prototypes from the headers where
needed.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove dpu_format_get_block_size, dpu_format_get_framebuffer_size,
dpu_set_scaler_v2 and dpu_copy_formats they are unused and unneeded.
Signed-off-by: Jordan Crouse <jcrouse@codeauorora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
None of the functions in dpu_kms_utils.c seem to be used so
remove them all.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove a chunk of unused code from drm_crtc.c, namely
dpu_crtc_res_add, dpu_crtc_res_get, dpu_crtc_res_put
and associated static functions.
Also zap dpu_crtc_event_queue(), helper functions
and members.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove dpu_encoder_check_mode and dpu_encoder_helper_hw_release
frmo drm_encoder.c as they appear to be unused.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The suspend/resume functions are not referenced when power
management is disabled:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1288:12: error: 'dpu_runtime_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1261:12: error: 'dpu_runtime_suspend' defined but not used [-Werror=unused-function]
This marks them as __maybe_unused to let the compiler
drop the functions without complaining.
Fixes: 591225291ca2 ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fix the sparse error. the dpu_rm_init declaration is not consistent
with the implement.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
[robclark un-typo'd subject line]
Signed-off-by: Rob Clark <robdclark@gmail.com>
In these cases, we want to enumerate _all_ clocks, not just the ones
that are assigned a rate.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Should work with the legacy handling in of, but we shouldn't rely on
that.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The vblank on/off calls were missing in dpu_crtc
leading to "driver forgot to call drm_crtc_vblank_off()"
warning while entering suspend state.
Also handle the state update completion event for
a crtc being disabled in current atomic commit.
This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).
MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).
The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):
MDSS
+---------------------------------+
| +-----------------------------+ |
| | DPU | |
| | +--------+ +--------+ | |
| | | SSPP | | SSPP | | |
| | +----+---+ +----+---+ | |
| | | | | |
| | +----v-----------v---+ | |
| | | Layer Mixer (LM) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | PingPong (PP) | | |
| | +--------------------+ | |
| | +--------------------+ | |
| | | INTERFACE (VIDEO) | | |
| | +---+----------------+ | |
| +------|----------------------+ |
| | |
| +------|---------------------+ |
| | | DISPLAY PERIPHERALS | |
| | +---v-+ +-----+ | |
| | | DSI | | DP | | |
| | +-----+ +-----+ | |
| +----------------------------+ |
+---------------------------------+
The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.
Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
capable of performing format conversion, scaling and quality improvement
for source surfaces.
* Layer Mixer (LM):
Blend source surfaces together (in requested zorder)
* PingPong (PP):
This block controls frame done interrupt output, EOL and EOF generation,
overflow/underflow control.
* Display interface (INTF):
Timing generator and interface connecting the display peripherals.
DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs
Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
- Dual pipe: Output from two LMs combined to single display.
- Split display: Output from two LMs connected to two separate
interfaces.
The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.
Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>
SoCs having mdp5 or dpu have identical tree like
device hierarchy where MDSS top level wrapper manages
common power resources for all child devices.
Subclass msm_mdss so that msm_mdss includes common defines
and mdp5/dpu mdss derivations to include any extensions.
Add mdss helper interface (msm_mdss_funcs) to msm_mdss
base for mdp5/dpu mdss specific implementation calls.
This change subclasses msm_mdss for mdp5, dpu specific
changes will be done separately.
Changes in v3:
- Added Archit's R-b
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
[seanpaul rebased on msm-next and resolved conflicts]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU doesn't use this, so push it into the mdp drivers.
Changes in v3:
- None
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
modesetting X11 driver may provide negative x/y cordinates in
mdp5_crtc_cursor_move call when rotation is enabled.
Cursor buffer can overlap down to its negative width/height.
ROI has to be recalculated for negative x/y indicating using the
lower/right corner of the cursor buffer and hotspot must be set
in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X.
Signed-off-by: Carsten Behling <carsten.behling@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
f9cb8d8d83 fixed various race conditions with CTL flush, in particular
flushing and sending the START signal before encoder state was updated.
But it did this a little too well in some cases that don't trigger
encoder->enable(), and CTL[n].FLUSH would never be set. When page flips
happen it would paper over the bug, since the first plag flip would
flush out the state to the hardware.
The issue could be reproduced with, for example, modetest (without the
'-v' argument).
Fixes: f9cb8d8d83 drm/msm/mdp5: rework CTL START signal handling
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
In commits:
34a2ab5e06 ("drm: Add acquire ctx parameter to ->update_plane")
1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
a pointer to a drm_modeset_acquire_ctx structure was added as an
argument to the method prototypes. The transitional helpers are
supposed to be directly plugged in as implementations of these
methods, but doing so generates a warning. Add the missing
argument.
A number of buggy users were added for drm_plane_helper_disable()
which need to be fixed up for this change, which we do by passing
a NULL ctx argument.
Fixes: 1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Ensure that any queued events are issued when disabling the crtc. This
avoids timeouts when we come back and wait for dependencies (like the
previous frame's flip_done).
Changes in v2:
- None
Changes in v3:
- Rebased on Archit's private_obj set
Changes in v4:
- None
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In preparation for moving to atomic helpers, move the implicit sync
fence handling out of atomic commit and into the plane->prepare_fb()
hook. While we're at it, de-duplicate the mdp*_prepare_fb functions.
Changes in v4:
- Added
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
With the addition of "private_objs" in drm_atomic_state, we no longer
need to subclass drm_atomic_state to store state of share resources
that don't perfectly fit within planes/crtc/connector state information.
We can now save this state within drm_atomic_state itself using
the private objects.
Remove the infrastructure that allowed subclassing of drm_atomic_state
in the driver.
Changes in v3:
- Added to the msm atomic helper patch set
Changes in v4:
- None
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This replaces the usage of the subclassed atomic state (mdp5_state)
with a private_obj state embedded within drm_atomic_state. The latter
method is the preferred approach, since it's simpler to implement
and less prone to errors.
The new API replaces the older and equivalent mdp5_state usage in the
following pattern:
- References to "mdp5_kms->state" (i.e, the old/existing state) is
replaced with mdp5_get_existing_global_state(). In the atomic_check
path, this should be called with the glob_state_lock drm_modeset_lock
alredy taken.
- References to "mdp5_get_state()" are replaced with
mdp5_get_global_state(). This acquires glob_state_lock and uses
drm_atomic_get_private_obj_state() to create a new duplicated state.
Changes in v3:
- Acquire glob_state_lock in mdp5_smp.c
- Added to the msm atomic helper patch set
Changes in v4:
- None
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Global shared resources (hwpipes, hwmixers and SMP) for MDP5 are
implemented as a part of atomic state by subclassing drm_atomic_state.
The preferred approach is to use the drm_private_obj infrastructure
available in the atomic core.
mdp5_global_state is introduced as a drm atomic private object. The two
funcs mdp5_get_global_state() and mdp5_get_existing_global_state() are
the two variants that will be used to access mdp5_global_state.
This will replace the existing mdp5_state struct (which subclasses
drm_atomic_state) and the funcs around it. These will be removed later
once we mdp5_global_state is put to use everywhere.
Changes in v3:
- Added glob_state_lock instead of pushing it into the core
- Added to the msm atomic helper patch set
Changes in v4:
- None
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This change plumbs the new fb modifier through the various mdp/disp
get_format hooks.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pimped out commit message a bit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Don't leave the event != NULL once it's consumed, this is used a signal
to the atomic helpers that the event will be handled by the driver.
Changes in v2:
- None
Changes in v3:
- Rebased on Archit's private_obj set
Changes in v4:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This change plumbs the new fb modifier through the various mdp/disp
get_format hooks.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pimped out commit message a bit]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Don't leave the event != NULL once it's consumed, this is used a signal
to the atomic helpers that the event will be handled by the driver.
Changes in v2:
- None
Changes in v3:
- Rebased on Archit's private_obj set
Changes in v4:
- None
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Updates for 4.17. Sorry, running a bit late on this, didn't have a
chance to send pull-req before heading to linaro. But it has all been
in linux-next for a while. Main updates:
+ DSI updates from 10nm / SDM845
+ fix for race condition with a3xx/a4xx fence completion irq
+ some refactoring/prep work for eventual a6xx support (ie. when we have
a userspace)
+ a5xx debugfs enhancements
+ some mdp5 fixes/cleanups to prepare for eventually merging writeback
support (ie. when we have a userspace)
* tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~robclark/linux: (36 commits)
drm/msm: fix building without debugfs
drm/msm/mdp5: don't pre-reserve LM's if no dual-dsi
drm/msm/mdp5: add missing LM flush bits
drm/msm/mdp5: print a bit more of the atomic state
drm/msm/mdp5: rework CTL START signal handling
drm/msm: Trigger fence completion from GPU
drm/msm/dsi: fix direct caller of msm_gem_free_object()
drm/msm: strip out msm_fence_cb
drm/msm: rename mdp->disp
drm/msm/dsi: Fix potential NULL pointer dereference in msm_dsi_modeset_init
drm/msm/adreno/a5xx_debugfs: fix potential NULL pointer dereference
drm/msm/dsi: Get byte_intf_clk only for versions that need it
drm/msm/adreno: Use generic function to load firmware to a buffer object
drm/msm/adreno: Define a list of firmware files to load per target
drm/msm/adreno: Rename gpmufw to powerfw
drm/msm: Pass the correct aperture end to drm_mm_init
drm/msm/gpu: Set number of clocks to 0 if the list allocation fails
drm/msm: Replace gem_object deprecated functions
drm/msm/hdmi: fix semicolon.cocci warnings
drm/msm/mdp5: Fix trailing semicolon
...
If there is only a single DSI interface, don't reserve the first two
layer-mixers for the dual-DSI use-case.
This was causing problems for WB, not being able to assign a LM, on
8x16, which has only two LM's and a single DSI.
Signed-off-by: Rob Clark <robdclark@gmail.com>
For DSI cmd-mode and writeback, we need to write the CTL's START
register to kick things off, but we only want to do that once both
the encoder and the crtc have a chance to write their corresponding
flush bits. The difficulty is that when there is a full modeset
(ie. encoder state has changed) we want to defer the start until
encoder->enable(). But if only plane's have changed, we want to do
this from crtc->commit().
The start_mask was a previous attempt to handle this, but it didn't
really do the right thing since atomic conversion.
Instead track in the crtc state that the start should be deferred,
set to try from encoder's (or in future writeback's) atomic_check().
This way the state is part of the atomic state, and rollback can
work properly if an atomic test fails.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since new display controller is called "dpu" instead of "mdp". Lets
make the name of the toplevel directory for the display controllers a
bit more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
