A SoC variant of Geode GX1, notably NSC branded SC1100, seems to
report an inverted Device ID in its DIR0 configuration register,
specifically 0xb instead of the expected 0x4.
Catch this presumably quirky version so it's properly recognized
as GX1 and has its cache switched to write-back mode, which provides
a significant performance boost in most workloads.
SC1100's datasheet "Geode™ SC1100 Information Appliance On a Chip",
states in section 1.1.7.1 "Device ID" that device identification
values are specified in SC1100's device errata. These, however,
seem to not have been publicly released.
Wading through a number of boot logs and /proc/cpuinfo dumps found on
pastebin and blogs, this patch should mostly be relevant for a number
of now admittedly aging Soekris NET4801 and PC Engines WRAP devices,
the latter being the platform this issue was discovered on.
Performance impact was verified using "openssl speed", with
write-back caching scaling throughput between -3% and +41%.
Signed-off-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1496596719.26725.14.camel@student.kit.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all affected platforms have a microcode update; and we check
this and disable TSC_DEADLINE and print a microcode revision update
error if its too old, we can remove the TSC_ADJUST clamp.
This should help with systems where the second socket runs ahead of
the first socket and needs a negative adjustment. In this case we'd
hit the 0 clamp and give up for not achieving synchronization.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: kevin.b.stanton@intel.com
Link: http://lkml.kernel.org/r/20170531155306.100950003@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Due to errata it is possible for the TSC_DEADLINE timer to misbehave
after using TSC_ADJUST. A microcode update is available to fix this
situation.
Avoid using the TSC_DEADLINE timer if it is affected by this issue and
report the required microcode version.
[ tglx: Renamed function to apic_check_deadline_errata() ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: kevin.b.stanton@intel.com
Link: http://lkml.kernel.org/r/20170531155306.050849877@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
... to raw_smp_processor_id() to not trip the
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
check. The reasoning behind it is that __warn() already uses the raw_
variants but the show_regs() path on 32-bit doesn't.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528092212.fiod7kygpjm23m3o@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With CONFIG_DEBUG_PREEMPT enabled, I get:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2
Call Trace:
dump_stack
check_preemption_disabled
debug_smp_processor_id
save_microcode_in_initrd_amd
? microcode_init
save_microcode_in_initrd
...
because, well, it says it above, we're using smp_processor_id() in
preemptible code.
But passing the CPU number is not really needed. It is only used to
determine whether we're on the BSP, and, if so, to save the microcode
patch for early loading.
[ We don't absolutely need to do it on the BSP but we do that
customarily there. ]
Instead, convert that function parameter to a boolean which denotes
whether the patch should be saved or not, thereby avoiding the use of
smp_processor_id() in preemptible code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for X86:
- The final fix for the end-of-stack issue in the unwinder
- Handle non PAT systems gracefully
- Prevent access to uninitiliazed memory
- Move early delay calaibration after basic init
- Fix Kconfig help text
- Fix a cross compile issue
- Unbreak older make versions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
x86/PAT: Fix Xorg regression on CPUs that don't support PAT
x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
x86/build: Permit building with old make versions
x86/unwind: Add end-of-stack check for ftrace handlers
Revert "x86/entry: Fix the end of the stack for newly forked tasks"
x86/boot: Use CROSS_COMPILE prefix for readelf
Pull RAS fixes from Thomas Gleixner:
"Two fixlets for RAS:
- Export memory_error() so the NFIT module can utilize it
- Handle memory errors in NFIT correctly"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
acpi, nfit: Fix the memory error check in nfit_handle_mce()
x86/MCE: Export memory_error()
ftrace use module_alloc() to allocate trampoline pages. The mapping of
module_alloc() is RWX, which makes sense as the memory is written to right
after allocation. But nothing makes these pages RO after writing to them.
Add proper set_memory_rw/ro() calls to protect the trampolines after
modification.
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.
Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.
Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: d0381c81c2 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The function isn't used since commit:
5ad274d41c ("x86/irq: Remove unused old IOAPIC irqdomain interfaces")
Removing it fixes the following warning when building with clang:
arch/x86/kernel/apic/io_apic.c:1219:19: error: unused function
'IO_APIC_irq_trigger' [-Werror,-Wunused-function]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170522232035.187985-1-mka@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This ensures that adjustments to x86_platform done by the hypervisor
setup is already respected by this simple calibration.
The current user of this, introduced by 1b5aeebf3a ("x86/earlyprintk:
Add support for earlyprintk via USB3 debug port"), comes much later
into play.
Fixes: dd759d93f4 ("x86/timers: Add simple udelay calibration")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: http://lkml.kernel.org/r/5e89fe60-aab3-2c1c-aba8-32f8ad376189@siemens.com
The conversion of the hotplug locking to a percpu rwsem unearthed lock
ordering issues all over the place.
The jump_label code has two issues:
1) Nested get_online_cpus() invocations
2) Ordering problems vs. the cpus rwsem and the jump_label_mutex
To cure these, the following lock order has been established;
cpus_rwsem -> jump_label_lock -> text_mutex
Even if not all architectures need protection against CPU hotplug, taking
cpus_rwsem before jump_label_lock is now mandatory in code pathes which
actually modify code and therefor need text_mutex protection.
Move the get_online_cpus() invocations into the core jump label code and
establish the proper lock order where required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20170524081549.025830817@linutronix.de
mtrr_save_state() is invoked from native_cpu_up() which is in the context
of a CPU hotplug operation and therefor calling get_online_cpus() is
pointless.
While this works in the current get_online_cpus() implementation it
prevents from converting the hotplug locking to percpu rwsems.
Remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170524081547.651378834@linutronix.de
In the current form of the code, if a->replacementlen is 0, the reference
to *insnbuf for comparison touches potentially garbage memory. While it
doesn't affect the execution flow due to the subsequent a->replacementlen
comparison, it is (rightly) detected as use of uninitialized memory by a
runtime instrumentation currently under my development, and could be
detected as such by other tools in the future, too (e.g. KMSAN).
Fix the "false-positive" by reordering the conditions to first check the
replacement instruction length before referencing specific opcode bytes.
Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/20170524135500.27223-1-mjurczyk@google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Dave Jones and Steven Rostedt reported unwinder warnings like the
following:
WARNING: kernel stack frame pointer at ffff8800bda0ff30 in sshd:1090 has bad value 000055b32abf1fa8
In both cases, the unwinder was attempting to unwind from an ftrace
handler into entry code. The callchain was something like:
syscall entry code
C function
ftrace handler
save_stack_trace()
The problem is that the unwinder's end-of-stack logic gets confused by
the way ftrace lays out the stack frame (with fentry enabled).
I was able to recreate this warning with:
echo call_usermodehelper_exec_async:stacktrace > /sys/kernel/debug/tracing/set_ftrace_filter
(exit login session)
I considered fixing this by changing the ftrace code to rewrite the
stack to make the unwinder happy. But that seemed too intrusive after I
implemented it. Instead, just add another check to the unwinder's
end-of-stack logic to detect this special case.
Side note: We could probably get rid of these end-of-stack checks by
encoding the frame pointer for syscall entry just like we do for
interrupt entry. That would be simpler, but it would also be a lot more
intrusive since it would slightly affect the performance of every
syscall.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: live-patching@vger.kernel.org
Fixes: c32c47c68a ("x86/unwind: Warn on bad frame pointer")
Link: http://lkml.kernel.org/r/671ba22fbc0156b8f7e0cfa5ab2a795e08bc37e1.1495553739.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The newly introduced wrapper function only has one caller,
and this one is conditional, causing a harmless warning when
CONFIG_CPU_FREQ is disabled:
arch/x86/kernel/tsc.c:189:13: error: 'set_cyc2ns_scale' defined but not used [-Werror=unused-function]
My first idea was to move the wrapper inside of that #ifdef,
but on second thought it seemed nicer to remove it completely
again and rename __set_cyc2ns_scale back to set_cyc2ns_scale,
but leaving the extra argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 615cd03373 ("x86/tsc: Fix sched_clock() sync")
Link: http://lkml.kernel.org/r/20170517203949.2052220-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in announce_cpu() to handle the extra states.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184735.191715856@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Scalable MCA systems have a new MCA_CONFIG register that we use to
configure each bank. We currently use this when we set up thresholding.
However, this is logically separate.
Group all SMCA-related initialization into a single function.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493147772-2721-2-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have support for the new SMCA MCA_DE{STAT,ADDR} registers in Linux.
So we've used these registers in place of MCA_{STATUS,ADDR} on SMCA
systems.
However, the guidance for current SMCA implementations of is to continue
using MCA_{STATUS,ADDR} and to use MCA_DE{STAT,ADDR} only if a Deferred
error was not found in the former registers. If we logged a Deferred
error in MCA_STATUS then we should also clear MCA_DESTAT. This also
means we shouldn't clear MCA_CONFIG[LogDeferredInMcaStat].
Rework __log_error() to only log an error and add helpers for the
different error types being logged from the corresponding interrupt
handlers.
Boris: carve out common functionality into a _log_error_bank(). Cleanup
comments, check MCi_STATUS bits before reading MSRs. Streamline flow.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493147772-2721-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The refcount_t type and corresponding API should be used instead
of atomic_t when the variable is used as a reference counter. This
allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1492695536-5947-1-git-send-email-elena.reshetova@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Export the function which checks whether an MCE is a memory error to
other users so that we can reuse the logic. Drop the boot_cpu_data use,
while at it, as mce.cpuvendor already has the CPU vendor in there.
Integrate a piece from a patch from Vishal Verma
<vishal.l.verma@intel.com> to export it for modules (nfit).
The main reason we're exporting it is that the nfit handler
nfit_handle_mce() needs to detect a memory error properly before doing
its recovery actions.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170519093915.15413-2-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported by syzkaller:
BUG: unable to handle kernel paging request at ffffffffc07f6a2e
IP: report_bug+0x94/0x120
PGD 348e12067
P4D 348e12067
PUD 348e14067
PMD 3cbd84067
PTE 80000003f7e87161
Oops: 0003 [#1] SMP
CPU: 2 PID: 7091 Comm: kvm_load_guest_ Tainted: G OE 4.11.0+ #8
task: ffff92fdfb525400 task.stack: ffffbda6c3d04000
RIP: 0010:report_bug+0x94/0x120
RSP: 0018:ffffbda6c3d07b20 EFLAGS: 00010202
do_trap+0x156/0x170
do_error_trap+0xa3/0x170
? kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
? mark_held_locks+0x79/0xa0
? retint_kernel+0x10/0x10
? trace_hardirqs_off_thunk+0x1a/0x1c
do_invalid_op+0x20/0x30
invalid_op+0x1e/0x30
RIP: 0010:kvm_load_guest_fpu.part.175+0x12a/0x170 [kvm]
? kvm_load_guest_fpu.part.175+0x1c/0x170 [kvm]
kvm_arch_vcpu_ioctl_run+0xed6/0x1b70 [kvm]
kvm_vcpu_ioctl+0x384/0x780 [kvm]
? kvm_vcpu_ioctl+0x384/0x780 [kvm]
? sched_clock+0x13/0x20
? __do_page_fault+0x2a0/0x550
do_vfs_ioctl+0xa4/0x700
? up_read+0x1f/0x40
? __do_page_fault+0x2a0/0x550
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc2
SDM mentioned that "The MXCSR has several reserved bits, and attempting to write
a 1 to any of these bits will cause a general-protection exception(#GP) to be
generated". The syzkaller forks' testcase overrides xsave area w/ random values
and steps on the reserved bits of MXCSR register. The damaged MXCSR register
values of guest will be restored to SSEx MXCSR register before vmentry. This
patch fixes it by catching userspace override MXCSR register reserved bits w/
random values and bails out immediately.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The argument to sched_clock_idle_wakeup_event() has not been used in a
long time. Remove it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we keep sched_clock_tick() active for stable TSC in order to
keep the per-CPU state semi up-to-date. The (obvious) problem is that
by the time we detect TSC is borked, our per-CPU state is also borked.
So hook into the clocksource watchdog and call a method after we've
found it to still be stable.
There's the obvious race where the TSC goes wonky between finding it
stable and us running the callback, but closing that is too much work
and not really worth it, since we're already detecting TSC wobbles
after the fact, so we cannot, per definition, fully avoid funny clock
values.
And since the watchdog runs less often than the tick, this is also an
optimization.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For the (older) CPUs that still need the refined TSC calibration, also
update the sched_clock() rate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While looking through the code I noticed that we initialize the cyc2ns
fields with a different cycle value for each CPU, resulting in a
slightly different 0 point for each CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the custom multi-value scheme with the more regular
seqcount_latch() scheme. Along with scrapping a lot of lines, the latch
scheme is better documented and used in more places.
The immediate benefit however is not being limited on the update side.
The current code has a limit where the writers block which is hit by
future changes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since the clocksource watchdog will only detect broken TSC after the
fact, all TSC based clocks will likely have observed non-continuous
values before/when switching away from TSC.
Therefore only thing to fully avoid random clock movement when your
BIOS randomly mucks with TSC values from SMI handlers is reporting the
TSC as unstable at boot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- two boot crash fixes
- unwinder fixes
- kexec related kernel direct mappings enhancements/fixes
- more Clang support quirks
- minor cleanups
- Documentation fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix a typo in Documentation
x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
x86/kexec/64: Use gbpages for identity mappings if available
x86/mm: Add support for gbpages to kernel_ident_mapping_init()
x86/boot: Declare error() as noreturn
x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
x86/microcode/AMD: Remove redundant NULL check on mc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZFWTzAAoJELDendYovxMv24cIAJ3U2OZ64d7WTKD37AT2O6nF
6R3j+zJ6apoKX4zHvhWUOHZ6jpTASTnaisiIskVc52JcgAK0f8ZYTg5nhyWPceAD
Icf+JuXrI6uplD97qsjt7X9FbxUsRZninfsznoBkK6P8Cw8ZWlWIWIl6e3CrVwBD
geyKcbsKkVG8+bMjWvmQd94CFq5r8Ivup0sCECumx0lqw3RhxdhQvUix9eBULEoG
h/XAuPbMupdjU6phgqG4rvUjWd/R+9mIIDG1oY9Kpx4Kpn/7bHtoYZ//Qzs8bmuP
5ORujOedshdyAZqLGxQuQzo+/4E9gX3qVbaS6fPf1Ab+ra0k/iWtetUITZ0v2AQ=
=gWpG
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two fixes for booting under Xen introduced during this
merge window and two fixes for older problems, where one is just much
more probable due to another merge window change"
* tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: adjust early dom0 p2m handling to xen hypervisor behavior
x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
xen/x86: Do not call xen_init_time_ops() until shared_info is initialized
x86/xen: fix xsave capability setting
When running as Xen pv guest X86_BUG_SYSRET_SS_ATTRS must not be set
on AMD cpus.
This bug/feature bit is kind of special as it will be used very early
when switching threads. Setting the bit and clearing it a little bit
later leaves a critical window where things can go wrong. This time
window has enlarged a little bit by using setup_clear_cpu_cap() instead
of the hypervisor's set_cpu_features callback. It seems this larger
window now makes it rather easy to hit the problem.
The proper solution is to never set the bit in case of Xen.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Subsystem:
- Add OF device ID table for i2c drivers
New driver:
- Motorola CPCAP PMIC RTC
Drivers:
- cmos: fix IRQ selection
- ds1307: Add ST m41t0 support
- ds1374: fix watchdog configuration
- sh: Add rza series support
-----BEGIN PGP SIGNATURE-----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=40TA
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC subsystem update:
- Add OF device ID table for i2c drivers
New RTC driver:
- Motorola CPCAP PMIC RTC
RTC driver updates:
- cmos: fix IRQ selection
- ds1307: Add ST m41t0 support
- ds1374: fix watchdog configuration
- sh: Add rza series support"
* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: gemini: add return value validation
rtc: snvs: fix an incorrect check of return value
rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
rtc: sh: mark PM functions as unused
rtc: hid-sensor-time: remove some dead code
rtc: m41t80: Add proper compatible for rv4162
rtc: ds1307: Add m41t0 to OF device ID table
rtc: ds1307: support m41t0 variant
rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
x86: i8259: export legacy_pic symbol
dt-bindings: rtc: document the rtc-sh bindings
rtc: sh: add support for rza series
rtc: cpcap: kfreeing devm allocated memory
rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
rtc: cpcap: new rtc driver
dt-bindings: Add vendor prefix for Motorola
rtc: omap: mark PM methods as __maybe_unused
rtc: omap: remove incorrect __exit markups
...
This includes:
* Some code optimizations for the Intel VT-d driver
* Code to switch off a previously enabled Intel IOMMU
* Support for 'struct iommu_device' for OMAP, Rockchip and
Mediatek IOMMUs
* Some header optimizations for IOMMU core code headers and a
few fixes that became necessary in other parts of the kernel
because of that
* ACPI/IORT updates and fixes
* Some Exynos IOMMU optimizations
* Code updates for the IOMMU dma-api code to bring it closer to
use per-cpu iova caches
* New command-line option to set default domain type allocated
by the iommu core code
* Another command line option to allow the Intel IOMMU switched
off in a tboot environment
* ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using
an IDENTITY domain in conjunction with DMA ops, Support for
SMR masking, Support for 16-bit ASIDs (was previously broken)
* Various other small fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3aE8
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- code optimizations for the Intel VT-d driver
- ability to switch off a previously enabled Intel IOMMU
- support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
IOMMUs
- header optimizations for IOMMU core code headers and a few fixes that
became necessary in other parts of the kernel because of that
- ACPI/IORT updates and fixes
- Exynos IOMMU optimizations
- updates for the IOMMU dma-api code to bring it closer to use per-cpu
iova caches
- new command-line option to set default domain type allocated by the
iommu core code
- another command line option to allow the Intel IOMMU switched off in
a tboot environment
- ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
Support for 16-bit ASIDs (was previously broken)
- various other small fixes and improvements
* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
soc/qbman: Move dma-mapping.h include to qman_priv.h
soc/qbman: Fix implicit header dependency now causing build fails
iommu: Remove trace-events include from iommu.h
iommu: Remove pci.h include from trace/events/iommu.h
arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
ACPI/IORT: Fix CONFIG_IOMMU_API dependency
iommu/vt-d: Don't print the failure message when booting non-kdump kernel
iommu: Move report_iommu_fault() to iommu.c
iommu: Include device.h in iommu.h
x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
iommu/arm-smmu: Correct sid to mask
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
omap3isp: Remove iommu_group related code
iommu/omap: Add iommu-group support
iommu/omap: Make use of 'struct iommu_device'
iommu/omap: Store iommu_dev pointer in arch_data
iommu/omap: Move data structures to omap-iommu.h
iommu/omap: Drop legacy-style device support
...
This partially reverts commit:
23b2a4ddeb ("x86/boot/32: Defer resyncing initial_page_table until per-cpu is set up")
That commit had one definite bug and one potential bug. The
definite bug is that setup_per_cpu_areas() uses a differnet generic
implementation on UP kernels, so initial_page_table never got
resynced. This was fine for access to percpu data (it's in the
identity map on UP), but it breaks other users of
initial_page_table. The potential bug is that helpers like
efi_init() would be called before the tables were synced.
Avoid both problems by just syncing the page tables in setup_arch()
*and* setup_per_cpu_areas().
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
Now that all call sites, completely decouple cacheflush.h and
set_memory.h
[sfr@canb.auug.org.au: kprobes/x86: merge fix for set_memory.h decoupling]
Link: http://lkml.kernel.org/r/20170418180903.10300fd3@canb.auug.org.au
Link: http://lkml.kernel.org/r/1488920133-27229-17-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly.
Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__vmalloc* allows users to provide gfp flags for the underlying
allocation. This API is quite popular
$ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
77
The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space. About half of users don't
use this flag, though. This signals that we make the API unnecessarily
too complex.
This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM
are simplified and drop the flag.
Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
support; virtual interrupt controller performance improvements; support
for userspace virtual interrupt controller (slower, but necessary for
KVM on the weird Broadcom SoCs used by the Raspberry Pi 3)
* MIPS: basic support for hardware virtualization (ImgTec
P5600/P6600/I6400 and Cavium Octeon III)
* PPC: in-kernel acceleration for VFIO
* s390: support for guests without storage keys; adapter interruption
suppression
* x86: usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits; emulation of CPL3 CPUID faulting
* generic: first part of VCPU thread request API; kvm_stat improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZEHUkAAoJEL/70l94x66DBeYH/09wrpJ2FjU4Rqv7FxmqgWfH
9WGi4wvn/Z+XzQSyfMJiu2SfZVzU69/Y67OMHudy7vBT6knB+ziM7Ntoiu/hUfbG
0g5KsDX79FW15HuvuuGh9kSjUsj7qsQdyPZwP4FW/6ZoDArV9mibSvdjSmiUSMV/
2wxaoLzjoShdOuCe9EABaPhKK0XCrOYkygT6Paz1pItDxaSn8iW3ulaCuWMprUfG
Niq+dFemK464E4yn6HVD88xg5j2eUM6bfuXB3qR3eTR76mHLgtwejBzZdDjLG9fk
32PNYKhJNomBxHVqtksJ9/7cSR6iNPs7neQ1XHemKWTuYqwYQMlPj1NDy0aslQU=
=IsiZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- HYP mode stub supports kexec/kdump on 32-bit
- improved PMU support
- virtual interrupt controller performance improvements
- support for userspace virtual interrupt controller (slower, but
necessary for KVM on the weird Broadcom SoCs used by the Raspberry
Pi 3)
MIPS:
- basic support for hardware virtualization (ImgTec P5600/P6600/I6400
and Cavium Octeon III)
PPC:
- in-kernel acceleration for VFIO
s390:
- support for guests without storage keys
- adapter interruption suppression
x86:
- usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits
- emulation of CPL3 CPUID faulting
generic:
- first part of VCPU thread request API
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
kvm: nVMX: Don't validate disabled secondary controls
KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
Revert "KVM: Support vCPU-based gfn->hva cache"
tools/kvm: fix top level makefile
KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
KVM: Documentation: remove VM mmap documentation
kvm: nVMX: Remove superfluous VMX instruction fault checks
KVM: x86: fix emulation of RSM and IRET instructions
KVM: mark requests that need synchronization
KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
KVM: add explicit barrier to kvm_vcpu_kick
KVM: perform a wake_up in kvm_make_all_cpus_request
KVM: mark requests that do not need a wakeup
KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
KVM: x86: always use kvm_make_request instead of set_bit
KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
s390: kvm: Cpu model support for msa6, msa7 and msa8
KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
kvm: better MWAIT emulation for guests
KVM: x86: virtualize cpuid faulting
...
Kexec sets up all identity mappings before booting into the new
kernel, and this will cause extra memory consumption for paging
structures which is quite considerable on modern machines with
huge memory sizes.
E.g. on a 32TB machine that is kdumping, it could waste around
128MB (around 4MB/TB) from the reserved memory after kexec sets
all the identity mappings using the current 2MB page.
Add to that the memory needed for the loaded kdump kernel, initramfs,
etc., and it causes a kexec syscall -NOMEM failure.
As a result, we had to enlarge reserved memory via "crashkernel=X"
to work around this problem.
This causes some trouble for distributions that use policies
to evaluate the proper "crashkernel=X" value for users.
So enable gbpages for kexec mappings.
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/1493862171-8799-2-git-send-email-xlpang@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kernel identity mappings on x86-64 kernels are created in two
ways: by the early x86 boot code, or by kernel_ident_mapping_init().
Native kernels (which is the dominant usecase) use the former,
but the kexec and the hibernation code uses kernel_ident_mapping_init().
There's a subtle difference between these two ways of how identity
mappings are created, the current kernel_ident_mapping_init() code
creates identity mappings always using 2MB page(PMD level) - while
the native kernel boot path also utilizes gbpages where available.
This difference is suboptimal both for performance and for memory
usage: kernel_ident_mapping_init() needs to allocate pages for the
page tables when creating the new identity mappings.
This patch adds 1GB page(PUD level) support to kernel_ident_mapping_init()
to address these concerns.
The primary advantage would be better TLB coverage/performance,
because we'd utilize 1GB TLBs instead of 2MB ones.
It is also useful for machines with large number of memory to
save paging structure allocations(around 4MB/TB using 2MB page)
when setting identity mappings for all the memory, after using
1GB page it will consume only 8KB/TB.
( Note that this change alone does not activate gbpages in kexec,
we are doing that in a separate patch. )
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/1493862171-8799-1-git-send-email-xlpang@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware drivers
from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and
a bunch of other driver updates. Nothing major, except if you happen to
have the hardware for these drivers, and then you will be happy :)
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvAgg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yknsACgzkAeyz16Z97J3UTaeejbR7nKUCAAoKY4WEHY
8O9f9pr9gj8GMBwxeZQa
=OIfB
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of new char/misc driver drivers and features for
4.12-rc1.
There's lots of new drivers added this time around, new firmware
drivers from Google, more auxdisplay drivers, extcon drivers, fpga
drivers, and a bunch of other driver updates. Nothing major, except if
you happen to have the hardware for these drivers, and then you will
be happy :)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
firmware: google memconsole: Fix return value check in platform_memconsole_init()
firmware: Google VPD: Fix return value check in vpd_platform_init()
goldfish_pipe: fix build warning about using too much stack.
goldfish_pipe: An implementation of more parallel pipe
fpga fr br: update supported version numbers
fpga: region: release FPGA region reference in error path
fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
mei: drop the TODO from samples
firmware: Google VPD sysfs driver
firmware: Google VPD: import lib_vpd source files
misc: lkdtm: Add volatile to intentional NULL pointer reference
eeprom: idt_89hpesx: Add OF device ID table
misc: ds1682: Add OF device ID table
misc: tsl2550: Add OF device ID table
w1: Remove unneeded use of assert() and remove w1_log.h
w1: Use kernel common min() implementation
uio_mf624: Align memory regions to page size and set correct offsets
uio_mf624: Refactor memory info initialization
uio: Allow handling of non page-aligned memory regions
hangcheck-timer: Fix typo in comment
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZChTBAAoJELDendYovxMvkXEIAJDpK5UKMsL1Ihgc0DL0OujQ
UGxLfWJueSA1X7i8BgL/8vfgKxSEB9SUiM+ooHOKXS6oDhyk2RP4MuCe5+lhUbbv
ZMK5KxHMlVUOD9EjYif8DhhiwRowBbWYEwr8XgY12s0Ya0a9TQLVC+noGsuzqNiH
1UyzeeWlBae4nulUMMim6urPNq5AEPVeQKNX3S8rlnDp74IKVZuoISMM62b2KRSr
+R8FVBshXR/HO53YNY0+AfmmUa8T1+dyjL50Eo/QnsG0i+3igOqNrzSKSc6T+nBt
Zl3KDUE5W3/OlxuR+CIdZZ1KKtjzoAiR3cvVlHs2z7MIio87bJcYJforAqe6Evo=
=k6in
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen fixes and featrues for 4.12. The main changes are:
- enable building the kernel with Xen support but without enabling
paravirtualized mode (Vitaly Kuznetsov)
- add a new 9pfs xen frontend driver (Stefano Stabellini)
- simplify Xen's cpuid handling by making use of cpu capabilities
(Juergen Gross)
- add/modify some headers for new Xen paravirtualized devices
(Oleksandr Andrushchenko)
- EFI reset_system support under Xen (Julien Grall)
- and the usual cleanups and corrections"
* tag 'for-linus-4.12b-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (57 commits)
xen: Move xen_have_vector_callback definition to enlighten.c
xen: Implement EFI reset_system callback
arm/xen: Consolidate calls to shutdown hypercall in a single helper
xen: Export xen_reboot
xen/x86: Call xen_smp_intr_init_pv() on BSP
xen: Revert commits da72ff5bfc and 72a9b18629
xen/pvh: Do not fill kernel's e820 map in init_pvh_bootparams()
xen/scsifront: use offset_in_page() macro
xen/arm,arm64: rename __generic_dma_ops to xen_get_dma_ops
xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
xen/9pfs: select CONFIG_XEN_XENBUS_FRONTEND
x86/cpu: remove hypervisor specific set_cpu_features
vmware: set cpu capabilities during platform initialization
x86/xen: use capabilities instead of fake cpuid values for xsave
x86/xen: use capabilities instead of fake cpuid values for x2apic
x86/xen: use capabilities instead of fake cpuid values for mwait
x86/xen: use capabilities instead of fake cpuid values for acpi
x86/xen: use capabilities instead of fake cpuid values for acc
x86/xen: use capabilities instead of fake cpuid values for mtrr
x86/xen: use capabilities instead of fake cpuid values for aperf
...
o Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
o The rewrite was needed to add plugins to be unique to tracing instances.
i.e. mkdir instance/foo; cd instances/foo; echo do_IRQ:stacktrace > set_ftrace_filter
The old way was written very hacky. This removes a lot of those hacks.
o New "function-fork" tracing option. When set, pids in the set_ftrace_pid
will have their children added when the processes with their pids
listed in the set_ftrace_pid file forks.
o Exposure of "maxactive" for kretprobe in kprobe_events
o Allow for builtin init functions to be traced by the function tracer
(via the kernel command line). Module init function tracing will come
in the next release.
o Added more selftests, and have selftests also test in an instance.
-----BEGIN PGP SIGNATURE-----
iQExBAABCAAbBQJZCRchFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
zuIH/RsLUb8Hj6GmhAvn/tblUDzWyqlXX2h79VVlo/XrWayHYNHnKOmua1WwMZC6
xESXb/AffAc89VWTkKsrwaK7yfRPG6+w8zTZOcFuXSBpqSGG/oey9Fxj5Wqqpche
oJ2UY7ngxANAipkP5GxdYTafFSoWhGZGfUUtW+5tAHoFHzqO2lOjO8olbXP69sON
kVX/b461S20cVvRe5H/F0klXLSc37Tlp5YznXy4H4V4HcJSN1Fb6/uozOXALZ4se
SBpVMWmVVoGJorzj+ic7gVOeohvC8RnR400HbeMVwaI0Lj50noidDj/5Hv8F7T+D
h1B8vATNZLFAFUOSHINCBIu6Vj0=
=t8mg
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features for this release:
- Pretty much a full rewrite of the processing of function plugins.
i.e. echo do_IRQ:stacktrace > set_ftrace_filter
- The rewrite was needed to add plugins to be unique to tracing
instances. i.e. mkdir instance/foo; cd instances/foo; echo
do_IRQ:stacktrace > set_ftrace_filter The old way was written very
hacky. This removes a lot of those hacks.
- New "function-fork" tracing option. When set, pids in the
set_ftrace_pid will have their children added when the processes
with their pids listed in the set_ftrace_pid file forks.
- Exposure of "maxactive" for kretprobe in kprobe_events
- Allow for builtin init functions to be traced by the function
tracer (via the kernel command line). Module init function tracing
will come in the next release.
- Added more selftests, and have selftests also test in an instance"
* tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits)
ring-buffer: Return reader page back into existing ring buffer
selftests: ftrace: Allow some event trigger tests to run in an instance
selftests: ftrace: Have some basic tests run in a tracing instance too
selftests: ftrace: Have event tests also run in an tracing instance
selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances
selftests: ftrace: Allow some tests to be run in a tracing instance
tracing/ftrace: Allow for instances to trigger their own stacktrace probes
tracing/ftrace: Allow for the traceonoff probe be unique to instances
tracing/ftrace: Enable snapshot function trigger to work with instances
tracing/ftrace: Allow instances to have their own function probes
tracing/ftrace: Add a better way to pass data via the probe functions
ftrace: Dynamically create the probe ftrace_ops for the trace_array
tracing: Pass the trace_array into ftrace_probe_ops functions
tracing: Have the trace_array hold the list of registered func probes
ftrace: If the hash for a probe fails to update then free what was initialized
ftrace: Have the function probes call their own function
ftrace: Have each function probe use its own ftrace_ops
ftrace: Have unregister_ftrace_function_probe_func() return a value
ftrace: Add helper function ftrace_hash_move_and_update_ops()
ftrace: Remove data field from ftrace_func_probe structure
...
-----BEGIN PGP SIGNATURE-----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=UxFF
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux
Pull drm u pdates from Dave Airlie:
"This is the main drm pull request for v4.12. Apart from two fixes
pulls, everything should have been in drm-next for at least 2 weeks.
The biggest thing in here is AMD released the public headers for their
upcoming VEGA GPUs. These as always are quite a sizeable chunk of
header files. They've also added initial non-display support for those
GPUs, though they aren't available in production yet.
Otherwise it's pretty much normal.
New bridge drivers:
- megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
- generic LVDS bridge support.
Core:
- Displayport link train failure reporting to userspace
- debugfs interface cleaned up
- subsystem TODO in kerneldoc now
- Extended fbdev support (flipping and vblank wait)
- drm_platform removed
- EDP CRC support in helper
- HF-VSDB SCDC support in EDID parser
- Lots of code cleanups and header extraction
- Thunderbolt external GPU awareness
- Atomic helper improvements
- Documentation improvements
panel:
- Sitronix and Samsung new panel support
amdgpu:
- Preliminary vega10 support
- Multi-level page table support
- GPU sensor support for userspace
- PRT support for sparse buffers
- SR-IOV improvements
- Non-contig VRAM CPU mapping
i915:
- Atomic modesetting enabled by default on Gen5+
- LSPCON improvements
- Atomic state handling for cdclk
- GPU reset improvements
- In-kernel unit tests
- Geminilake improvements and color manager support
- Designware i2c fixes
- vblank evasion improvements
- Hotplug safe connector iterators
- GVT scheduler QoS support
- GVT Kabylake support
nouveau:
- Acceleration support for Pascal (GP10x).
- Rearchitecture of code handling proprietary signed firmware
- Fix GTX 970 with odd MMU configuration
- GP10B support
- GP107 acceleration support
vmwgfx:
- Atomic modesetting support for vmwgfx
omapdrm:
- Support for render nodes
- Refactor omapdss code
- Fix some probe ordering issues
- Fix too dark RGB565 rendering
sunxi:
- prelim rework for multiple pipes.
mali-dp:
- Color management support
- Plane scaling
- Power management improvements
imx-drm:
- Prefetch Resolve Engine/Gasket on i.MX6QP
- Deferred plane disabling
- Separate alpha support
mediatek:
- Mediatek SoC MT2701 support
rcar-du:
- Gen3 HDMI support
msm:
- 4k support for newer chips
- OPP bindings for gpu
- prep work for per-process pagetables
vc4:
- HDMI audio support
- fixes
qxl:
- minor fixes.
dw-hdmi:
- PHY improvements
- CSC fixes
- Amlogic GX SoC support"
* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
drm: mali-dp: use div_u64 for expensive 64-bit divisions
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm: mali-dp: Check the mclk rate and allow up/down scaling
drm: mali-dp: Enable image enhancement when scaling
drm: mali-dp: Add plane upscaling support
...
Pull livepatch updates from Jiri Kosina:
- a per-task consistency model is being added for architectures that
support reliable stack dumping (extending this, currently rather
trivial set, is currently in the works).
This extends the nature of the types of patches that can be applied
by live patching infrastructure. The code stems from the design
proposal made [1] back in November 2014. It's a hybrid of SUSE's
kGraft and RH's kpatch, combining advantages of both: it uses
kGraft's per-task consistency and syscall barrier switching combined
with kpatch's stack trace switching. There are also a number of
fallback options which make it quite flexible.
Most of the heavy lifting done by Josh Poimboeuf with help from
Miroslav Benes and Petr Mladek
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
- module load time patch optimization from Zhou Chengming
- a few assorted small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add missing printk newlines
livepatch: Cancel transition a safe way for immediate patches
livepatch: Reduce the time of finding module symbols
livepatch: make klp_mutex proper part of API
livepatch: allow removal of a disabled patch
livepatch: add /proc/<pid>/patch_state
livepatch: change to a per-task consistency model
livepatch: store function sizes
livepatch: use kstrtobool() in enabled_store()
livepatch: move patching functions into patch.c
livepatch: remove unnecessary object loaded check
livepatch: separate enabled and patched states
livepatch/s390: add TIF_PATCH_PENDING thread flag
livepatch/s390: reorganize TIF thread flag bits
livepatch/powerpc: add TIF_PATCH_PENDING thread flag
livepatch/x86: add TIF_PATCH_PENDING thread flag
livepatch: create temporary klp_update_patch_state() stub
x86/entry: define _TIF_ALLWORK_MASK flags explicitly
stacktrace/x86: add function for detecting reliable stack traces
There is no user of x86_hyper->set_cpu_features() any more. Remove it.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
There is no need to set the same capabilities for each cpu
individually. This can be done for all cpus in platform initialization.
Cc: Alok Kataria <akataria@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Alok Kataria <akataria@vmware.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
All code to support Xen PV will get under this new option. For the
beginning, check for it in the common code.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
As a preparation to splitting the code we need to untangle it:
x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv
xen_platform() -> xen_platform_hvm() and xen_platform_pv()
xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm()
xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm()
Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and
cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant
xen_pv_domain() check can be dropped.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
Pull x86 irq update from Ingo Molnar:
"A single commit that micro-optimizes an IRQ vectors code path in the
CPU offlining code"
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Optimize free vector check in the CPU offline path
Pull x86 debug updates from Ingo Molnar:
"The biggest update is the addition of USB3 debug port based
early-console.
Greg was fine with the USB changes and with the routing of these
patches:
https://www.spinics.net/lists/linux-usb/msg155093.html"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
usb/doc: Add document for USB3 debug port usage
usb/serial: Add DBC debug device support to usb_debug
x86/earlyprintk: Add support for earlyprintk via USB3 debug port
usb/early: Add driver for xhci debug capability
x86/timers: Add simple udelay calibration
Pull x86 cleanups from Ingo Molnar:
"A handful of small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Remove a redundant #ifdef directive
x86/smp: Remove the redundant #ifdef CONFIG_SMP directive
x86/smp: Reduce code duplication
x86/pci-calgary: Use setup_timer() instead of open coding it.
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- unwinder fixes and enhancements
- improve ftrace interaction with the unwinder
- optimize the code footprint of WARN() and related debugging
constructs
- ... plus misc updates, cleanups and fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/unwind: Dump all stacks in unwind_dump()
x86/unwind: Silence more entry-code related warnings
x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
x86/unwind: Remove unused 'sp' parameter in unwind_dump()
x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
x86/unwind: Ensure stack pointer is aligned
debug: Avoid setting BUGFLAG_WARNING twice
x86/unwind: Silence entry-related warnings
x86/unwind: Read stack return address in update_stack_state()
x86/unwind: Move common code into update_stack_state()
debug: Fix __bug_table[] in arch linker scripts
debug: Add _ONCE() logic to report_bug()
x86/debug: Define BUG() again for !CONFIG_BUG
x86/debug: Implement __WARN() using UD0
x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
x86/ftrace: Clean up ftrace_regs_caller
x86/ftrace: Add stack frame pointer to ftrace_caller
x86/ftrace: Move the ftrace specific code out of entry_32.S
...
Pull x86 apic updates from Ingo Molnar:
"Two small cleanups"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix a comment in init_apic_mappings()
x86/apic: Remove the SET_APIC_ID(x) macro
Pull x86 cpu updates from Ingo Molnar:
"The biggest changes are an extension of the Intel RDT code to extend
it with Intel Memory Bandwidth Allocation CPU support: MBA allows
bandwidth allocation between cores, while CBM (already upstream)
allows CPU cache partitioning.
There's also misc smaller fixes and updates"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/intel_rdt: Return error for incorrect resource names in schemata
x86/intel_rdt: Trim whitespace while parsing schemata input
x86/intel_rdt: Fix padding when resource is enabled via mount
x86/intel_rdt: Get rid of anon union
x86/cpu: Keep model defines sorted by model number
x86/intel_rdt/mba: Add schemata file support for MBA
x86/intel_rdt: Make schemata file parsers resource specific
x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation
x86/intel_rdt: Make information files resource specific
x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)
x86/intel_rdt/mba: Memory bandwith allocation feature detect
x86/intel_rdt: Add resource specific msr update function
x86/intel_rdt: Move CBM specific data into a struct
x86/intel_rdt: Cleanup namespace to support multiple resource types
Documentation, x86: Intel Memory bandwidth allocation
x86/intel_rdt: Organize code properly
x86/intel_rdt: Init padding only if a device exists
x86/intel_rdt: Add cpus_list rdtgroup file
x86/intel_rdt: Cleanup kernel-doc
x86/intel_rdt: Update schemata read to show data in tabular format
...
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- reworking of the e820 code: separate in-kernel and boot-ABI data
structures and apply a whole range of cleanups to the kernel side.
No change in functionality.
- enable KASLR by default: it's used by all major distros and it's
out of the experimental stage as well.
- ... misc fixes and cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
x86/reboot: Turn off KVM when halting a CPU
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
x86: Enable KASLR by default
boot/param: Move next_arg() function to lib/cmdline.c for later reuse
x86/boot: Fix Sparse warning by including required header file
x86/boot/64: Rename start_cpu()
x86/xen: Update e820 table handling to the new core x86 E820 code
x86/boot: Fix pr_debug() API braindamage
xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
x86/boot/e820: Simplify e820__update_table()
x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
x86/boot/e820: Fix and clean up e820_type switch() statements
x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
x86/boot/e820: Remove unnecessary #include's
x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
x86/boot/e820: Use bool in query APIs
x86/boot/e820: Document e820__reserve_setup_data()
x86/boot/e820: Clean up __e820__update_table() et al
...
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- add the 'Corrected Errors Collector' kernel feature which collect
and monitor correctable errors statistics and will preemptively
(soft-)offline physical pages that have a suspiciously high error
count.
- handle MCE errors during kexec() more gracefully
- factor out and deprecate the /dev/mcelog driver
- ... plus misc fixes and cleanpus"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
ACPI/APEI: Use setup_deferrable_timer()
x86/mce: Update notifier priority check
x86/mce: Enable PPIN for Knights Landing/Mill
x86/mce: Do not register notifiers with invalid prio
x86/mce: Factor out and deprecate the /dev/mcelog driver
RAS: Add a Corrected Errors Collector
x86/mce: Rename mce_log to mce_log_buffer
x86/mce: Rename mce_log()'s argument
x86/mce: Init some CPU features early
x86/mce: Handle broadcasted MCE gracefully with kexec
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- Kprobes and uprobes changes:
- Make their trampolines read-only while they are used
- Make UPROBES_EVENTS default-y which is the distro practice
- Apply misc fixes and robustization to probe point insertion.
- add support for AMD IOMMU events
- extend hw events on Intel Goldmont CPUs
- ... plus misc fixes and updates.
Tooling side changes:
- support s390 jump instructions in perf annotate (Christian
Borntraeger)
- vendor hardware events updates (Andi Kleen)
- add argument support for SDT events in powerpc (Ravi Bangoria)
- beautify the statx syscall arguments in 'perf trace' (Arnaldo
Carvalho de Melo)
- handle inline functions in callchains (Jin Yao)
- enable sorting by srcline as key (Milian Wolff)
- add 'brstackinsn' field in 'perf script' to reuse the x86
instruction decoder used in the Intel PT code to study hot paths to
samples (Andi Kleen)
- add PERF_RECORD_NAMESPACES so that the kernel can record
information required to associate samples to namespaces, helping in
container problem characterization. (Hari Bathini)
- allow sorting by symbol_size in 'perf report' and 'perf top'
(Charles Baylis)
- in perf stat, make system wide (-a) the default option if no target
was specified and one of following conditions is met:
- no workload specified (current behaviour)
- a workload is specified but all requested events are system wide
ones, like uncore ones. (Jiri Olsa)
- ... plus lots of other updates, enhancements, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits)
perf tools: Fix the code to strip command name
tools arch x86: Sync cpufeatures.h
tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel
tools: Update asm-generic/mman-common.h copy from the kernel
perf tools: Use just forward declarations for struct thread where possible
perf tools: Add the right header to obtain PERF_ALIGN()
perf tools: Remove poll.h and wait.h from util.h
perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
perf tools: Remove stale prototypes from builtin.h
perf tools: Remove string.h from util.h
perf tools: Remove sys/ioctl.h from util.h
perf tools: Remove a few more needless includes from util.h
perf tools: Include sys/param.h where needed
perf callchain: Move callchain specific routines from util.[ch]
perf tools: Add compress.h for the *_decompress_to_file() headers
perf mem: Fix display of data source snoop indication
perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h
perf kvm: Make function only used by 'perf kvm' static
perf tools: Move timestamp routines from util.h to time-utils.h
perf tools: Move units conversion/formatting routines to separate object
...
Pul x86/process updates from Ingo Molnar:
"The main change in this cycle was to add the ARCH_[GET|SET]_CPUID
prctl() ABI extension to control the availability of the CPUID
instruction, analogously to the existing PR_GET|SET_TSC ABI that
controls RDTSC.
Motivation: the 'rr' user-space record-and-replay execution debugger
would like to trap and emulate the CPUID instruction - which
instruction is normally unprivileged.
Trapping CPUID is possible on IvyBridge and later Intel CPUs - expose
this hardware capability"
* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls/32: Ignore arch_prctl for other architectures
um/arch_prctl: Fix fallout from x86 arch_prctl() rework
x86/arch_prctl: Add ARCH_[GET|SET]_CPUID
x86/cpufeature: Detect CPUID faulting support
x86/syscalls/32: Wire up arch_prctl on x86-32
x86/arch_prctl: Add do_arch_prctl_common()
x86/arch_prctl/64: Rename do_arch_prctl() to do_arch_prctl_64()
x86/arch_prctl/64: Use SYSCALL_DEFINE2 to define sys_arch_prctl()
x86/arch_prctl: Rename 'code' argument to 'option'
x86/msr: Rename MISC_FEATURE_ENABLES to MISC_FEATURES_ENABLES
x86/process: Optimize TIF_NOTSC switch
x86/process: Correct and optimize TIF_BLOCKSTEP switch
x86/process: Optimize TIF checks in __switch_to_xtra()
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- move BGRT handling to drivers/acpi so it can be shared between x86
and ARM
- bring the EFI stub's initrd and FDT allocation logic in line with
the latest changes to the arm64 boot protocol
- improvements and fixes to the EFI stub's command line parsing
routines
- randomize the virtual mapping of the UEFI runtime services on
ARM/arm64
- ... and other misc enhancements, cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT space
ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region
efi/libstub/arm/arm64: Disable debug prints on 'quiet' cmdline arg
efi/libstub: Unify command line param parsing
efi/libstub: Fix harmless command line parsing bug
efi/arm32-stub: Allow boot-time allocations in the vmlinux region
x86/efi: Clean up a minor mistake in comment
efi/pstore: Return error code (if any) from efi_pstore_write()
efi/bgrt: Enable ACPI BGRT handling on arm64
x86/efi/bgrt: Move efi-bgrt handling out of arch/x86
efi/arm-stub: Round up FDT allocation to mapping size
efi/arm-stub: Correct FDT and initrd allocation rules for arm64
Pull timer updates from Thomas Gleixner:
"The timer departement delivers:
- more year 2038 rework
- a massive rework of the arm achitected timer
- preparatory patches to allow NTP correction of clock event devices
to avoid early expiry
- the usual pile of fixes and enhancements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
arm64/arch_timer: Mark errata handlers as __maybe_unused
Clocksource/mips-gic: Remove redundant non devicetree init
MIPS/Malta: Probe gic-timer via devicetree
clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource: arm_arch_timer: simplify ACPI support code.
acpi/arm64: Add GTDT table parse driver
clocksource: arm_arch_timer: split MMIO timer probing.
clocksource: arm_arch_timer: add structs to describe MMIO timer
clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
clocksource: arm_arch_timer: refactor arch_timer_needs_probing
clocksource: arm_arch_timer: split dt-only rate handling
x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
um/time: Set ->min_delta_ticks and ->max_delta_ticks
tile/time: Set ->min_delta_ticks and ->max_delta_ticks
score/time: Set ->min_delta_ticks and ->max_delta_ticks
...
Pull x86 fixes from Thomas Gleixner:
"The final fixes for 4.11:
- prevent a triple fault with function graph tracing triggered via
suspend to ram
- prevent optimizing for size when function graph tracing is enabled
and the compiler does not support -mfentry
- prevent mwaitx() being called with a zero timeout as mwaitx() might
never return. Observed on the new Ryzen CPUs"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Prevent timer value 0 for MWAITX
x86/build: convert function graph '-Os' error to warning
ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
IOMMU harms performance signficantly when we run very fast networking
workloads. It's 40GB networking doing XDP test. Software overhead is
almost unaware, but it's the IOTLB miss (based on our analysis) which
kills the performance. We observed the same performance issue even with
software passthrough (identity mapping), only the hardware passthrough
survives. The pps with iommu (with software passthrough) is only about
~30% of that without it. This is a limitation in hardware based on our
observation, so we'd like to disable the IOMMU force on, but we do want
to use TBOOT and we can sacrifice the DMA security bought by IOMMU. I
must admit I know nothing about TBOOT, but TBOOT guys (cc-ed) think not
eabling IOMMU is totally ok.
So introduce a new boot option to disable the force on. It's kind of
silly we need to run into intel_iommu_init even without force on, but we
need to disable TBOOT PMR registers. For system without the boot option,
nothing is changed.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
mark_screen_rdonly() is the last remaining caller of flush_tlb().
flush_tlb_mm_range() is potentially faster and isn't obsolete.
Compile-tested only because I don't know whether software that uses
this mechanism even exists.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/791a644076fc3577ba7f7b7cafd643cc089baa7d.1492844372.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently unwind_dump() dumps only the most recently accessed stack.
But it has a few issues.
In some cases, 'first_sp' can get out of sync with 'stack_info', causing
unwind_dump() to start from the wrong address, flood the printk buffer,
and eventually read a bad address.
In other cases, dumping only the most recently accessed stack doesn't
give enough data to diagnose the error.
Fix both issues by dumping *all* stacks involved in the trace, not just
the last one.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8b5e99f022 ("x86/unwind: Dump stack data on warnings")
Link: http://lkml.kernel.org/r/016d6a9810d7d1bfc87ef8c0e6ee041c6744c909.1493171120.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov reported the following unwinder warning:
WARNING: kernel stack regs at ffffc9000024fea8 in udevadm:92 has bad 'bp' value 00007fffc4614d30
unwind stack type:0 next_sp: (null) mask:0x6 graph_idx:0
ffffc9000024fea8: 000055a6100e9b38 (0x55a6100e9b38)
ffffc9000024feb0: 000055a6100e9b35 (0x55a6100e9b35)
ffffc9000024feb8: 000055a6100e9f68 (0x55a6100e9f68)
ffffc9000024fec0: 000055a6100e9f50 (0x55a6100e9f50)
ffffc9000024fec8: 00007fffc4614d30 (0x7fffc4614d30)
ffffc9000024fed0: 000055a6100eaf50 (0x55a6100eaf50)
ffffc9000024fed8: 0000000000000000 ...
ffffc9000024fee0: 0000000000000100 (0x100)
ffffc9000024fee8: ffff8801187df488 (0xffff8801187df488)
ffffc9000024fef0: 00007ffffffff000 (0x7ffffffff000)
ffffc9000024fef8: 0000000000000000 ...
ffffc9000024ff10: ffffc9000024fe98 (0xffffc9000024fe98)
ffffc9000024ff18: 00007fffc4614d00 (0x7fffc4614d00)
ffffc9000024ff20: ffffffffffffff10 (0xffffffffffffff10)
ffffc9000024ff28: ffffffff811c6c1f (SyS_newlstat+0xf/0x10)
ffffc9000024ff30: 0000000000000010 (0x10)
ffffc9000024ff38: 0000000000000296 (0x296)
ffffc9000024ff40: ffffc9000024ff50 (0xffffc9000024ff50)
ffffc9000024ff48: 0000000000000018 (0x18)
ffffc9000024ff50: ffffffff816b2e6a (entry_SYSCALL_64_fastpath+0x18/0xa8)
...
It unwinded from an interrupt which came in right after entry code
called into a C syscall handler, before it had a chance to set up the
frame pointer, so regs->bp still had its user space value.
Add a check to silence warnings in such a case, where an interrupt
has occurred and regs->sp is almost at the end of the stack.
Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c32c47c68a ("x86/unwind: Warn on bad frame pointer")
Link: http://lkml.kernel.org/r/c695f0d0d4c2cfe6542b90e2d0520e11eb901eb5.1493171120.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fengguang Wu's zero day bot triggered a stack unwinder dump. This can
be easily triggered when CONFIG_FRAME_POINTERS is enabled and -mfentry
is in use on x86_32.
># cd /sys/kernel/debug/tracing
># echo 'p:schedule schedule' > kprobe_events
># echo stacktrace > events/kprobes/schedule/trigger
This is because the code that implemented fentry in the ftrace_regs_caller
tried to use the least amount of #ifdefs, and modified ebp when
CC_USE_FENTRY was defined to point to the parent ip as it does when
CC_USE_FENTRY is not defined. But when CONFIG_FRAME_POINTERS is set, it
corrupts the ebp register for this frame while doing the tracing.
NOTE, it does not corrupt ebp in any other way. It is just a bad frame
pointer when calling into the tracing infrastructure. The original ebp is
restored before returning from the fentry call. But if a stack trace is
performed inside the tracing, the unwinder will notice the bad ebp.
Instead of toying with ebp with CC_USING_FENTRY, just slap the parent ip
into the second parameter (%edx), and have an #else that does it the
original way.
The unwinder will unfortunately miss the function being traced, as the
stack frame is not set up yet for it, as it is for x86_64. But fixing that
is a bit more complex and did not work before anyway.
This has been tested with and without FRAME_POINTERS being set while using
-mfentry, as well as using an older compiler that uses mcount.
Analyzed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Fixes: 644e0e8dc7 ("x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lists.01.org/pipermail/lkp/2017-April/006165.html
Link: http://lkml.kernel.org/r/20170420172236.7af7f6e5@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When schemata parses the resource names it does not return an error if it
detects incorrect resource names and fails quietly.
This happens because for_each_enabled_rdt_resource(r) leaves "r" pointing
beyond the end of the rdt_resources_all[] array, and the check for !r->name
results in an out of bounds access.
Split the resource parsing part into a helper function to avoid the issue.
[ tglx: Made it readable by splitting the parser loop out into a function ]
Reported-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1492645804-17465-4-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Before offlining a CPU its required to check whether there are enough free
irq vectors available so interrupts can be migrated away from the CPU.
This check is executed whether its required or not and neither stops
searching when the number of required free vectors are reached.
Bypass the free vector check if the current CPU has no irq to migrate and
leave the for_each_online_cpu() loop when the free vector count reaches the
number of required vectors.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Len Brown <lenb@kernel.orq>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1492357410-510-1-git-send-email-yu.c.chen@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Modify the reschedule warning to output the offline CPU number and
use a better debug message.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1492518305-3808-1-git-send-email-prarit@redhat.com
[ Tweaked the warning message. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A CPU in VMX root mode will ignore INIT signals and will fail to bring
up the APs after reboot. Therefore, on a panic we disable VMX on all
CPUs before rebooting or triggering kdump.
Do this when halting the machine as well, in case a firmware-level reboot
does not perform a cold reset for all processors. Without doing this,
rebooting the host may hang.
Signed-off-by: Tiantian Feng <fengtiantian@huawei.com>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
[ Rewritten commit message. ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/20170419161839.30550-1-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mce_usable_address() does a bunch of basic sanity checks to verify
whether the address reported with the error is usable for further
processing. However, we do check MCi_STATUS[MISCV] and that is not
needed on AMD as that bit says that there's additional information about
the logged error in the MCi_MISCj banks.
But we don't need that to know whether the address is usable - we only
need to know whether the physical address is valid - i.e., ADDRV.
On Intel the MISCV bit is needed to perform additional checks to determine
whether the reported address is a physical one, etc.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170418183924.6agjkebilwqj26or@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In unwind_dump(), the stack mask value is printed in hex, but is
confusingly not prepended with '0x'.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/e7fe41be19d73c9f99f53082486473febfe08ffa.1492520933.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86-32, 32-bit stack values printed by unwind_dump() are confusingly
zero-padded to 16 characters (64 bits):
unwind stack type:0 next_sp: (null) mask:a graph_idx:0
f50cdebc: 00000000f50cdec4 (0xf50cdec4)
f50cdec0: 00000000c40489b7 (irq_exit+0x87/0xa0)
...
Instead, base the field width on the size of a long integer so that it
looks right on both x86-32 and x86-64.
x86-32:
unwind stack type:1 next_sp: (null) mask:0x2 graph_idx:0
c0ee9d98: c0ee9de0 (init_thread_union+0x1de0/0x2000)
c0ee9d9c: c043fd90 (__save_stack_trace+0x50/0xe0)
...
x86-64:
unwind stack type:1 next_sp: (null) mask:0x2 graph_idx:0
ffffffff81e03b88: ffffffff81e03c10 (init_thread_union+0x3c10/0x4000)
ffffffff81e03b90: ffffffff81048f8e (__save_stack_trace+0x5e/0x100)
...
Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/36b743812e7eb291d74af4e5067736736622daad.1492520933.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For pre-4.6.0 versions of GCC, which don't have '-mfentry', the
'-maccumulate-outgoing-args' option is required for function graph
tracing in order to avoid GCC bug 42109.
However, GCC ignores '-maccumulate-outgoing-args' when '-Os' is
also set.
Currently we force a build error to prevent that scenario, but that
breaks randconfigs. So change the error to a warning which also
disables CONFIG_CC_OPTIMIZE_FOR_SIZE.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Link: http://lkml.kernel.org/r/20170418214429.o7fbwbmf4nqosezy@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY881cAAoJEHm+PkMAQRiGG4UH+wa2z6Qet36Uc4nXFZuSMYrO
ErUWs1QpTDDv4a+LE4fgyMvM3j9XqtpfQLy1n70jfD14IqPBhHe4gytasAf+8lg1
YvddFx0Yl3sygVu3dDBNigWeVDbfwepW59coN0vI5nrMo+wrei8aVIWcFKOxdMuO
n72u9vuhrkEnLJuQk7SF+t4OQob9McXE3s7QgyRopmlKhKo7mh8On7K2BRI5uluL
t0j5kZM0a43EUT5rq9xR8f5pgtyfTMG/FO2MuzZn43MJcZcyfmnOP/cTSIvAKA5U
1i12lxlokYhURNUe+S6jm8A47TrqSRSJxaQJZRlfGJksZ0LJa8eUaLDCviBQEoE=
=6QWZ
-----END PGP SIGNATURE-----
Merge tag 'v4.11-rc7' into drm-next
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
The NFIT MCE handler callback (for handling media errors on NVDIMMs)
takes a mutex to add the location of a memory error to a list. But since
the notifier call chain for machine checks (x86_mce_decoder_chain) is
atomic, we get a lockdep splat like:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 0, pid: 4, name: kworker/0:0
[..]
Call Trace:
dump_stack
___might_sleep
__might_sleep
mutex_lock_nested
? __lock_acquire
nfit_handle_mce
notifier_call_chain
atomic_notifier_call_chain
? atomic_notifier_call_chain
mce_gen_pool_process
Convert the notifier to a blocking one which gets to run only in process
context.
Boris: remove the notifier call in atomic context in print_mce(). For
now, let's print the MCE on the atomic path so that we can make sure
they go out and get logged at least.
Fixes: 6839a6d96f ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170411224457.24777-1-vishal.l.verma@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With frame pointers disabled, on some older versions of GCC (like
4.8.3), it's possible for the stack pointer to get aligned at a
half-word boundary:
00000000000004d0 <fib_table_lookup>:
4d0: 41 57 push %r15
4d2: 41 56 push %r14
4d4: 41 55 push %r13
4d6: 41 54 push %r12
4d8: 55 push %rbp
4d9: 53 push %rbx
4da: 48 83 ec 24 sub $0x24,%rsp
In such a case, the unwinder ends up reading the entire stack at the
wrong alignment. Then the last read goes past the end of the stack,
hitting the stack guard page:
BUG: stack guard page was hit at ffffc900217c4000 (stack is ffffc900217c0000..ffffc900217c3fff)
kernel stack overflow (page fault): 0000 [#1] SMP
...
Fix it by ensuring the stack pointer is properly aligned before
unwinding.
Reported-by: Jirka Hladky <jhladky@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 7c7900f897 ("x86/unwind: Add new unwind interface and implementations")
Link: http://lkml.kernel.org/r/cff33847cc9b02fa548625aa23268ac574460d8d.1492436590.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Update the check which enforces the registration of MCE decoder notifier
callbacks with valid priority only, to include mcelog's priority.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lkp@01.org
Link: http://lkml.kernel.org/r/20170418073820.i6kl5tggcntwlisa@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The call to irq_ctx_init() is wrapped in #ifdef CONFIG_X86_32.
The declaration of irq_ctx_init in irq.h provides already a stub inline for
the X86_32=n case.
Remove the redundant #ifdef in the code.
[ tglx: Massaged changelog ]
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1491811500-30307-1-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.
Make the x86 arch's apic clockevent driver initialize these fields
properly.
This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
CC: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The files in the info directory for MBA are as follows:
num_closids
The maximum number of CLOSids available for MBA
min_bandwidth
The minimum memory bandwidth percentage value
bandwidth_gran
The granularity of the bandwidth control in percent for the
particular CPU SKU. Intermediate values entered are rounded off
to the previous control step available. Available bandwidth
control steps are minimum_bandwidth + N * bandwidth_gran.
delay_linear
When set, the OS writes a linear percentage based value to the
control MSRs ranging from minimum_bandwidth to 100 percent.
This value is informational and has no influence on the values
written to the schemata files. The values written to the
schemata are always bandwidth percentage that is requested.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-7-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Memory bandwidth allocation requires different information than cache
allocation.
To avoid a lump of data in struct rdt_resource, move all cache related
information into a seperate structure and add that to struct rdt_resource.
Sanitize the data types while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
The classic PC rtc-coms driver has a workaround for broken ACPI device
nodes for it which lack an irq resource. This workaround used to
unconditionally hardcode the irq to 8 in these cases.
This was causing irq conflict problems on systems without a legacy-pic
so a recent patch added an if (nr_legacy_irqs()) guard to the
workaround to avoid this irq conflict.
nr_legacy_irqs() uses the legacy_pic symbol under the hood causing
an undefined symbol error if the rtc-cmos code is build as a module.
This commit exports the legacy_pic symbol to fix this.
Cc: rtc-linux@googlegroups.com
Cc: alexandre.belloni@free-electrons.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function
graph tracing and then suspend to RAM, it will triple fault and reboot when
it resumes.
The first fault happens when booting a secondary CPU:
startup_32_smp()
load_ucode_ap()
prepare_ftrace_return()
ftrace_graph_is_dead()
(accesses 'kill_ftrace_graph')
The early head_32.S code calls into load_ucode_ap(), which has an an
ftrace hook, so it calls prepare_ftrace_return(), which calls
ftrace_graph_is_dead(), which tries to access the global
'kill_ftrace_graph' variable with a virtual address, causing a fault
because the CPU is still in real mode.
The fix is to add a check in prepare_ftrace_return() to make sure it's
running in protected mode before continuing. The check makes sure the
stack pointer is a virtual kernel address. It's a bit of a hack, but
it's not very intrusive and it works well enough.
For reference, here are a few other (more difficult) ways this could
have potentially been fixed:
- Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging
is enabled. (No idea what that would break.)
- Track down load_ucode_ap()'s entire callee tree and mark all the
functions 'notrace'. (Probably not realistic.)
- Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu()
or __cpu_up(), and ensure that the pause facility can be queried from
real mode.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@kernel.org
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove a redundant self assignment of table->nr_entries, it does
nothing and is an artifact of code simplification re-work.
Detected by CoverityScan, CID#1428450 ("Self assignment")
Fixes: 441ac2f33d ("x86/boot/e820: Simplify e820__update_table()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: kernel-janitors@vger.kernel.org
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Link: http://lkml.kernel.org/r/20170413155912.12078-1-colin.king@canonical.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A few people have reported unwinder warnings like the following:
WARNING: kernel stack frame pointer at ffffc90000fe7ff0 in rsync:1157 has bad value (null)
unwind stack type:0 next_sp: (null) mask:2 graph_idx:0
ffffc90000fe7f98: ffffc90000fe7ff0 (0xffffc90000fe7ff0)
ffffc90000fe7fa0: ffffffffb7000f56 (trace_hardirqs_off_thunk+0x1a/0x1c)
ffffc90000fe7fa8: 0000000000000246 (0x246)
ffffc90000fe7fb0: 0000000000000000 ...
ffffc90000fe7fc0: 00007ffe3af639bc (0x7ffe3af639bc)
ffffc90000fe7fc8: 0000000000000006 (0x6)
ffffc90000fe7fd0: 00007f80af433fc5 (0x7f80af433fc5)
ffffc90000fe7fd8: 00007ffe3af638e0 (0x7ffe3af638e0)
ffffc90000fe7fe0: 00007ffe3af638e0 (0x7ffe3af638e0)
ffffc90000fe7fe8: 00007ffe3af63970 (0x7ffe3af63970)
ffffc90000fe7ff0: 0000000000000000 ...
ffffc90000fe7ff8: ffffffffb7b74b9a (entry_SYSCALL_64_after_swapgs+0x17/0x4f)
This warning can happen when unwinding a code path where an interrupt
occurred in x86 entry code before it set up the first stack frame.
Silently ignore any warnings for this case.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c32c47c68a ("x86/unwind: Warn on bad frame pointer")
Link: http://lkml.kernel.org/r/dbd6838826466a60dc23a52098185bc973ce2f1e.1492020577.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of reading the return address when unwind_get_return_address()
is called, read it from update_stack_state() and store it in the unwind
state. This enables the next patch to check the return address from
unwind_next_frame() so it can detect an entry code frame.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/af0c5e4560c49c0343dca486ea26c4fa92bc4e35.1492020577.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __unwind_start() and unwind_next_frame() functions have some
duplicated functionality. They both call decode_frame_pointer() and set
state->regs and state->bp accordingly. Move that functionality to a
common place in update_stack_state().
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/a2ee4801113f6d2300d58f08f6b69f85edf4eb43.1492020577.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
virt_xxx memory barriers are implemented trivially using the low-level
__smp_xxx macros, __smp_xxx is equal to a compiler barrier for strong
TSO memory model, however, mandatory barriers will unconditional add
memory barriers, this patch replaces the rmb() in kvm_steal_clock() by
virt_rmb().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Consolidate x86 instruction decoder users on the path of
copying original code for kprobes.
Kprobes decodes the same instruction a maximum of 3 times when
preparing the instruction buffer:
- The first time for getting the length of the instruction,
- the 2nd for adjusting displacement,
- and the 3rd for checking whether the instruction is boostable or not.
For each time, the actual decoding target address is slightly
different (1st is original address or recovered instruction buffer,
2nd and 3rd are pointing to the copied buffer), but all have
the same instruction.
Thus, this patch also changes the target address to the copied
buffer at first and reuses the decoded "insn" for displacement
adjusting and checking boostability.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076389643.22469.13151892839998777373.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use probe_kernel_read() for avoiding unexpected faults while
copying kernel text in __recover_probed_insn(),
__recover_optprobed_insn() and __copy_instruction().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076382624.22469.10091613887942958518.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Set the pages which is used for kprobes' singlestep buffer
and optprobe's trampoline instruction buffer to readonly.
This can prevent unexpected (or unintended) instruction
modification.
This also passes rodata_test as below.
Without this patch, rodata_test shows a warning:
WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:235 note_page+0x7a9/0xa20
x86/mm: Found insecure W+X mapping at address ffffffffa0000000/0xffffffffa0000000
With this fix, no W+X pages are found:
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076375592.22469.14174394514338612247.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make arch_specific_insn.boostable to boolean, since it has
only 2 states, boostable or not. So it is better to use
boolean from the viewpoint of code readability.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076368566.22469.6322906866458231844.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Do not modify singlestep execution buffer (kprobe.ainsn.insn)
while resuming from single-stepping, instead, modifies
the buffer to add a jump back instruction at preparing
buffer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076361560.22469.1610155860343077495.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use x86 instruction decoder for checking whether the probed
instruction is able to boost or not, instead of hand-written
code.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076354563.22469.13379472209338986858.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the description comment of __copy_instruction() function
since it has already been changed to return the length of the
copied instruction.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076347582.22469.3775133607244923462.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix the kprobe-booster not to boost far call instruction,
because a call may store the address in the single-step
execution buffer to the stack, which should be modified
after single stepping.
Currently, this instruction will be filtered as not
boostable in resume_execution(), so this is not a
critical issue.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/149076340615.22469.14066273186134229909.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The schemata lock is released before freeing the resource's temporary
tmp_cbms allocation. That's racy versus another write which allocates and
uses new temporary storage, resulting in memory leaks, freeing in use
memory, double a free or any combination of those.
Move the unlock after the release code.
Fixes: 60ec2440c6 ("x86/intel_rdt: Add schemata file")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170411071446.15241-1-jolsa@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since commit:
4bcc595ccd "printk: reinstate KERN_CONT for printing"
... the debug output of signal_fault(), do_trap() and do_general_protection()
looks garbled, e.g.:
traps: conftest[9335] trap invalid opcode ip:400428 sp:7ffeaba1b0d8 error:0
in conftest[400000+1000]
(note the unintended line break.)
Fix the bug by adding KERN_CONTs.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's a conflict between ongoing level-5 paging support and
the E820 rewrite. Since the E820 rewrite is essentially ready,
merge it into x86/mm to reduce tree conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The E820 rework in WIP.x86/boot has gone through a couple of weeks
of exposure in -tip, merge it in a wider fashion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY6mY1AAoJEHm+PkMAQRiGB14IAImsH28JPjxJVDasMIRPBxVc
euPPlZgoBieu7sNt+kEsEqdkXuu0MLk6gln0IGxWLeoB2S+u3Tz5LMa2YArVqV9Z
tWzOnI9auE73P2Pz/tUMOdyMs5tO0PolQxX3uljbULBozOHjHRh13fsXchX2yQvl
mFeFCDqpPV0KhWRH/ciA8uIHdvYPhMpkKgRtmR8jXL0yzqLp6+2J+Bs8nHG4NNng
HMVxZPC8jOE/TgWq6k/GmXgxh3H/AideFdHFbLKYnIFJW41ZGOI8a262zq3NmjPd
lywpVU7O7RMhSITY5PnuR3LpNV8ftw1hz2y6t35unyFK1P02adOSj5GJ3hGdhaQ=
=Xz5O
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc6' into drm-next
Linux 4.11-rc6
drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
The resource control filesystem provides only a bitmask based cpus file for
assigning CPUs to a resource group. That's cumbersome with large cpumasks
and non-intuitive when modifying the file from the command line.
Range based cpu lists are commonly used along with bitmask based cpu files
in various subsystems throughout the kernel.
Add 'cpus_list' file which is CPU range based.
# cd /sys/fs/resctrl/
# echo 1-10 > krava/cpus_list
# cat krava/cpus_list
1-10
# cat krava/cpus
0007fe
# cat cpus
fffff9
# cat cpus_list
0,3-23
[ tglx: Massaged changelog and replaced "bitmask lists" by "CPU ranges" ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20170410145232.GF25354@krava
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Apparently, some machines used to report DRAM errors through a PCI SERR
NMI. This is why we have a call into EDAC in the NMI handler. See
c0d1217202 ("drivers/edac: add new nmi rescan").
From looking at the patch above, that's two drivers: e752x_edac.c and
e7xxx_edac.c. Now, I wanna say those are old machines which are probably
decommissioned already.
Tony says that "[t]the newest CPU supported by either of those drivers
is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some
folks are still using these ... but people that hold onto h/w for 7
years generally cling to old s/w too ... so I'd guess it unlikely that
we will get complaints for breaking these in upstream."
So even if there is a small number still in use, we did load EDAC with
edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact)
which means a default EDAC setup without any parameters supplied on the
command line or otherwise would never even log the error in the NMI
handler because we're polling by default:
inline int edac_handler_set(void)
{
if (edac_op_state == EDAC_OPSTATE_POLL)
return 0;
return atomic_read(&edac_handlers);
}
So, long story short, I'd like to get rid of that nastiness called
edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If
we ever have to do stuff like that again, it should be notifiers we're
using and not some insanity like this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
When auto EOI is not enabled; issue an explicit EOI for hyper-v
interrupts.
Fixes: 6c248aad81 ("Drivers: hv: Base autoeoi enablement based on hypervisor hints")
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The schemata file can have multiple lines and it is cumbersome to update
all lines.
Remove code that requires that the user provides values for every resource
(in the right order). If the user provides values for just a few
resources, update them and leave the rest unchanged.
Side benefit: we now check which values were updated and only send IPIs to
cpus that actually have updates.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: ravi.v.shankar@intel.com
Cc: fenghua.yu@intel.com
Cc: peterz@infradead.org
Cc: vikas.shivappa@intel.com
Cc: h.peter.anvin@intel.com
Link: http://lkml.kernel.org/r/1491255857-17213-3-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that the ACPI BGRT handling code has been made generic, we can
enable it for arm64.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
[ Updated commit log to reflect that BGRT is only enabled for arm64, and added
missing 'return' statement to the dummy acpi_parse_bgrt() function. ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-8-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Put the right values from the original siginfo into the
userspace compat-siginfo.
This fixes the 32-bit MPX "tabletest" testcase on 64-bit kernels.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a4455082dc ('x86/signals: Add missing signal_compat code for x86 features')
Link: http://lkml.kernel.org/r/1491322501-5054-1-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We don't need extra virtual address space for ESPFIX, so it stays within
one PUD page table for both 4- and 5-level paging.
Redefining ESPFIX_BASE_ADDR using P4D_SHIFT instead of PGDIR_SHIFT would
make it stay in the same place regarding of paging mode.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170330080731.65421-8-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add operations to allocate/release p4ds.
Xen requires more work. We will need to come back to it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170330080731.65421-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RAS fix from Thomas Gleixner:
"Prevent dmesg from being spammed when MCE logging is active"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Don't print MCEs when mcelog is active
The kbuild test robot reported this build failure on a number
of architectures:
> make.cross ARCH=arm
> lib/lib.a(bug.o): In function `find_bug':
> >> lib/bug.c:135: undefined reference to `__start___bug_table'
> >> lib/bug.c:135: undefined reference to `__stop___bug_table'
Caused by:
19d436268d ("debug: Add _ONCE() logic to report_bug()")
Which moved the BUG_TABLE from RO_DATA_SECTION() to RW_DATA_SECTION(),
but a number of architectures don't use RW_DATA_SECTION(), so they
ended up with no __bug_table[] ...
Ideally all those would use RW_DATA_SECTION() in their linker scripts,
but that's for another day.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20170330154927.o6qmgfp4bdhrajbm@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"This update provides:
- prevent KASLR from randomizing EFI regions
- restrict the usage of -maccumulate-outgoing-args and document when
and why it is required.
- make the Global Physical Address calculation for UV4 systems work
correctly.
- address a copy->paste->forgot-edit problem in the MCE exception
table entries.
- assign a name to AMD MCA bank 3, so the sysfs file registration
works.
- add a missing include in the boot code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Include missing header file
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
x86/build: Mostly disable '-maccumulate-outgoing-args'
x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
x86/mce: Fix copy/paste error in exception table entries
x86/platform/uv: Fix calculation of Global Physical Address
The x86 mmap() code selects the mmap base for an allocation depending on
the bitness of the syscall. For 64bit sycalls it select mm->mmap_base and
for 32bit mm->mmap_compat_base.
On execve the registers of the task invoking exec() are copied to the child
pt_regs. So child->pt_regs->orig_ax contains the execve syscall number of the
parent.
exec() calls mmap() which in turn uses in_compat_syscall() to check whether
the mapping is for a 32bit or a 64bit task. The decision is made on the
following criteria:
ia32 child->thread.status & TS_COMPAT
x32 child->pt_regs.orig_ax & __X32_SYSCALL_BIT
ia64 !ia32 && !x32
child->thread.status is corretly set up in set_personality_*(), but the
syscall number in child->pt_regs.orig_ax is left unmodified.
Therefore the parent/child combinations work or fail in the following way:
Parent Child Child->thread_status child->pt_regs.orig_ax in_compat() Works
ia64 ia64 TS_COMPAT == 0 __X32_SYSCALL_BIT == 0 false Y
ia64 ia32 TS_COMPAT == 1 __X32_SYSCALL_BIT == 0 true Y
ia64 x32 TS_COMPAT == 0 __X32_SYSCALL_BIT == 0 false N
ia32 ia64 TS_COMPAT == 0 __X32_SYSCALL_BIT == 0 false Y
ia32 ia32 TS_COMPAT == 1 __X32_SYSCALL_BIT == 0 true Y
ia32 x32 TS_COMPAT == 0 __X32_SYSCALL_BIT == 0 false N
x32 ia64 TS_COMPAT == 0 __X32_SYSCALL_BIT == 1 true N
x32 ia32 TS_COMPAT == 1 __X32_SYSCALL_BIT == 1 true Y
x32 x32 TS_COMPAT == 0 __X32_SYSCALL_BIT == 1 true Y
Make set_personality_*() store the syscall number incl. __X32_SYSCALL_BIT
which corresponds to the newly started ELF executable in the childs
pt_regs, i.e. pretend that the exec was invoked from a task with the same
executable format.
So both thread.status and pt_regs.orig_ax correspond to the new ELF format
and in_compat_syscall() returns the correct result.
[ tglx: Rewrote changelog ]
Fixes: commit 1b028f784e ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: 0x7f454c46@gmail.com
Cc: linux-mm@kvack.org
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20170331111137.28170-1-dsafonov@virtuozzo.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs,
mostly because of issues which are no longer relevant. For most
configs, and with most recent versions of GCC, it's no longer needed.
Clarify which cases need it, and only enable it for those cases. Also
produce a compile-time error for the ftrace graph + mcount + '-Os' case,
which will otherwise cause runtime failures.
The main benefit of '-maccumulate-outgoing-args' is that it prevents an
ugly prologue for functions which have aligned stacks. But removing the
option also has some benefits: more readable argument saves, smaller
text size, and (presumably) slightly improved performance.
Here are the object size savings for 32-bit and 64-bit defconfig
kernels:
text data bss dec hex filename
10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before
9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after
text data bss dec hex filename
10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before
10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after
That comes out to a 3% text size improvement on x86-32 and a 0.1% text
size improvement on x86-64.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Moving enabling of function tracing to early boot, even before scheduling is
enabled, means that it is not safe to enable interrupts. When function
tracing was enabled at boot up, it use to happen after scheduling and the
other CPUs were brought up. That required running a sync across all CPUs
when modifying the function hook locations in the code. To do the
synchronization, interrupts had to be enabled. Now function tracing can be
started before the other CPUs are brought up, and enabling interrupts in
that case is dangerous. As only tho boot CPU is active, there is no reason
to run the synchronization. If the online CPU count is one, do not bother
doing the synchronization. This removes the need to enable interrupts.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is just a defensive precaution: do not register notifiers with a
priority which would disrupt the error handling in the notifiers with
prio higher than MCE_PRIO_EDAC.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170327093304.10683-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move all code relating to /dev/mcelog to a separate source file.
/dev/mcelog driver can now operate from the machine check notifier with
lowest prio.
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ Move the mce_helper and trigger functionality behind CONFIG_X86_MCELOG_LEGACY. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170327093304.10683-6-bp@alien8.de
[ Renamed CONFIG_X86_MCELOG to CONFIG_X86_MCELOG_LEGACY. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
