On many arm64 qcom device trees, running `make dtbs_check` yells:
timer@17c20000: #size-cells:0:0: 1 was expected
It appears that someone was trying to assert the fact that sub-nodes
describing frames would never have a size that's more than 32-bits
big. That does indeed appear to be true for all cases I could find.
Currently many arm64 qcom device tree files have a #address-cells and
about in commit bede7d2dc8 ("arm64: dts: qcom: sdm845: Increase
address and size cells for soc"). That means the only way we can
shrink them down is to use a non-empty ranges.
Since forever it has said in "writing-bindings.txt" to "DO use
non-empty 'ranges' to limit the size of child buses/devices". I guess
we should start listening to it.
I believe (but am not certain) that this also means that we should use
"ranges" to simplify the "reg" of our sub devices by specifying an
offset. Let's update the example in the bindings to make this
obvious.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add an entry for erratum A011043: the MDIO_CFG[MDIO_RD_ER]
bit may be falsely set when reading internal PCS registers.
MDIO reads to internal PCS registers may result in having
the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
error and read data (MDIO_DATA[MDIO_DATA]) is correct.
Software may get false read error when reading internal
PCS registers through MDIO. As a workaround, all internal
MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Primarily bugfixes, mostly around handling index wrap-around correctly.
A couple of doc fixes and adding missing APIs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl4pJv4ACgkQDpNsjXcp
gj5OXgf/Q52Am0tLS6iC7XtcojjidnSFzpAqn9OGo7zuTsP+QURsiZAXJpjvUF8y
kGIcD9R/tobEADkyDnj8D64yO+CqT1PlkaYvO5R+nYx/WTtmvr3/O/7Y4/ZTAwcf
tTvj3yXlKbsA+9YJa34t43Ul4EDCOrQTz+oIZUQsiaRNzIdmCCguLg5gOkIhoXt6
wJwp2Fc3YN6McBBpZH2z0GRwdJWPcixtKH0RNhOyGUiWBhkWYFXNvNEdxKJmTXdK
qqkoW9So8IkyyoXdW8ZpQqCCk9tPRv9+7adDFVwl/T8q/RBrHNtcyQqJL3EsScsi
9IqCrKldzRenk0v6lG+mgJEuTvYs8A==
=7cpi
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.5' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"Primarily bugfixes, mostly around handling index wrap-around
correctly.
A couple of doc fixes and adding missing APIs.
I had an oops live on stage at linux.conf.au this year, and it turned
out to be a bug in xas_find() which I can't prove isn't triggerable in
the current codebase. Then in looking for the bug, I spotted two more
bugs.
The bots have had a few days to chew on this with no problems
reported, and it passes the test-suite (which now has more tests to
make sure these problems don't come back)"
* tag 'xarray-5.5' of git://git.infradead.org/users/willy/linux-dax:
XArray: Add xa_for_each_range
XArray: Fix xas_find returning too many entries
XArray: Fix xa_find_after with multi-index entries
XArray: Fix infinite loop with entry at ULONG_MAX
XArray: Add wrappers for nested spinlocks
XArray: Improve documentation of search marks
XArray: Fix xas_pause at ULONG_MAX
From: Dave Hansen <dave.hansen@linux.intel.com>
MPX is being removed from the kernel due to a lack of support
in the toolchain going forward (gcc).
This removes all the remaining (dead at this point) MPX handling
code remaining in the tree. The only remaining code is the XSAVE
support for MPX state which is currently needd for KVM to handle
VMs which might use MPX.
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
gpiochip_set_chained_irqchip() would assign a chained handler
to a GPIO chip. We now populate struct gpio_irq_chip for all
chained GPIO irqchips so drop this function.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200113220800.77817-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit e878742c83.
Imgu should still keep the capability and flexibility to allow user to
run 2 video pipes, as the user may use the video pipe to capture still
frames with less system load and power than still pipe.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In some platforms, they disable the power-supply of eeprom due
to power consumption reduction. This patch add vcc-supply property.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Two UAPI system register IDs do not derive their values from the
ARM system register encodings. This is because their values were
accidentally swapped. As the IDs are API, they cannot be changed.
Add WARNING notes to point them out.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: turned XXX into WARNING]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200120130825.28838-1-drjones@redhat.com
Since commit 0f0581b24b ("spi: fsl: Convert to use CS GPIO
descriptors"), the prefered way to define chipselect GPIOs is using
'cs-gpios' property instead of the legacy 'gpios' property.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7556683b57d8ce100855857f03d1cd3d2903d045.1574943062.git.christophe.leroy@c-s.fr
This patch merges the sysfs node documentation present in
Documentation/filesystems/f2fs.txt and
Documentation/ABI/testing/sysfs-fs-f2fs
and deletes the duplicate information from
Documentation/filesystems/f2fs.txt. This is to prevent having to update
both files when a new sysfs node is added for f2fs.
The patch also makes minor formatting changes to
Documentation/ABI/testing/sysfs-fs-f2fs.
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.
* intel_idle+acpi:
Documentation: admin-guide: PM: Add intel_idle document
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
ACPI: processor: Export acpi_processor_evaluate_cst()
ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
ACPI: processor: Clean up acpi_processor_evaluate_cst()
ACPI: processor: Introduce acpi_processor_evaluate_cst()
ACPI: processor: Export function to claim _CST control
When an encrypted directory is listed without the key, the filesystem
must show "no-key names" that uniquely identify directory entries, are
at most 255 (NAME_MAX) bytes long, and don't contain '/' or '\0'.
Currently, for short names the no-key name is the base64 encoding of the
ciphertext filename, while for long names it's the base64 encoding of
the ciphertext filename's dirhash and second-to-last 16-byte block.
This format has the following problems:
- Since it doesn't always include the dirhash, it's incompatible with
directories that will use a secret-keyed dirhash over the plaintext
filenames. In this case, the dirhash won't be computable from the
ciphertext name without the key, so it instead must be retrieved from
the directory entry and always included in the no-key name.
Casefolded encrypted directories will use this type of dirhash.
- It's ambiguous: it's possible to craft two filenames that map to the
same no-key name, since the method used to abbreviate long filenames
doesn't use a proper cryptographic hash function.
Solve both these problems by switching to a new no-key name format that
is the base64 encoding of a variable-length structure that contains the
dirhash, up to 149 bytes of the ciphertext filename, and (if any bytes
remain) the SHA-256 of the remaining bytes of the ciphertext filename.
This ensures that each no-key name contains everything needed to find
the directory entry again, contains only legal characters, doesn't
exceed NAME_MAX, is unambiguous unless there's a SHA-256 collision, and
that we only take the performance hit of SHA-256 on very long filenames.
Note: this change does *not* address the existing issue where users can
modify the 'dirhash' part of a no-key name and the filesystem may still
accept the name.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved comments and commit message, fixed checking return value
of base64_decode(), check for SHA-256 error, continue to set disk_name
for short names to keep matching simpler, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Now that there's sometimes a second type of per-file key (the dirhash
key), clarify some function names, macros, and documentation that
specifically deal with per-file *encryption* keys.
Link: https://lore.kernel.org/r/20200120223201.241390-4-ebiggers@kernel.org
Reviewed-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
When we allow indexed directories to use both encryption and
casefolding, for the dirhash we can't just hash the ciphertext filenames
that are stored on-disk (as is done currently) because the dirhash must
be case insensitive, but the stored names are case-preserving. Nor can
we hash the plaintext names with an unkeyed hash (or a hash keyed with a
value stored on-disk like ext4's s_hash_seed), since that would leak
information about the names that encryption is meant to protect.
Instead, if we can accept a dirhash that's only computable when the
fscrypt key is available, we can hash the plaintext names with a keyed
hash using a secret key derived from the directory's fscrypt master key.
We'll use SipHash-2-4 for this purpose.
Prepare for this by deriving a SipHash key for each casefolded encrypted
directory. Make sure to handle deriving the key not only when setting
up the directory's fscrypt_info, but also in the case where the casefold
flag is enabled after the fscrypt_info was already set up. (We could
just always derive the key regardless of casefolding, but that would
introduce unnecessary overhead for people not using casefolding.)
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, squashed with change
that avoids unnecessarily deriving the key, and many other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Casefolded encrypted directories will use a new dirhash method that
requires a secret key. If the directory uses a v2 encryption policy,
it's easy to derive this key from the master key using HKDF. However,
v1 encryption policies don't provide a way to derive additional keys.
Therefore, don't allow casefolding on directories that use a v1 policy.
Specifically, make it so that trying to enable casefolding on a
directory that has a v1 policy fails, trying to set a v1 policy on a
casefolded directory fails, and trying to open a casefolded directory
that has a v1 policy (if one somehow exists on-disk) fails.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[EB: improved commit message, updated fscrypt.rst, and other cleanups]
Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add riscv to the KASAN documentation to mention that riscv
is supporting generic kasan now.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The affinity of managed interrupts is completely handled in the kernel and
cannot be changed via the /proc/irq/* interfaces from user space. As the
kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent
vector exhaustion, it can happen that a managed interrupt whose affinity
mask contains both isolated and housekeeping CPUs is routed to an isolated
CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts
on the isolated CPU.
Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding
logic in the interrupt affinity selection code.
The subparameter indicates to the interrupt affinity selection logic that
it should try to avoid the above scenario.
This isolation is best effort and only effective if the automatically
assigned interrupt mask of a device queue contains isolated and
housekeeping CPUs. If housekeeping CPUs are online then such interrupts are
directed to the housekeeping CPU so that IO submitted on the housekeeping
CPU cannot disturb the isolated CPU.
If a queue's affinity mask contains only isolated CPUs then this parameter
has no effect on the interrupt routing decision, though interrupts are only
happening when tasks running on those isolated CPUs submit IO. IO submitted
on housekeeping CPUs has no influence on those queues.
If the affinity mask contains both housekeeping and isolated CPUs, but none
of the contained housekeeping CPUs is online, then the interrupt is also
routed to an isolated CPU. Interrupts are only delivered when one of the
isolated CPUs in the affinity mask submits IO. If one of the contained
housekeeping CPUs comes online, the CPU hotplug logic migrates the
interrupt automatically back to the upcoming housekeeping CPU. Depending on
the type of interrupt controller, this can require that at least one
interrupt is delivered to the isolated CPU in order to complete the
migration.
[ tglx: Removed unused parameter, added and edited comments/documentation
and rephrased the changelog so it contains more details. ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
Expose the ID_AA64ISAR0.RNDR field to userspace, as the RNG system
registers are always available at EL0.
Implement arch_get_random_seed_long using RNDR. Given that the
TRNG is likely to be a shared resource between cores, and VMs,
do not explicitly force re-seeding with RNDRRS. In order to avoid
code complexity and potential issues with hetrogenous systems only
provide values after cpufeature has finalized the system capabilities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Modified to only function after cpufeature has finalized the system
capabilities and move all the code into the header -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Advertise HWCAP via /proc/cpuinfo]
Signed-off-by: Will Deacon <will@kernel.org>
Here are the interconnect patches for the 5.6-rc1 merge window.
- New core helper functions for some common functionalities in drivers.
- Improvements in the information exposed via debugfs.
- Basic tracepoints support.
- New interconnect driver for msm8916 platforms.
- Misc fixes.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=5hpf
-----END PGP SIGNATURE-----
Merge tag 'icc-5.6-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect patches for 5.6
Here are the interconnect patches for the 5.6-rc1 merge window.
- New core helper functions for some common functionalities in drivers.
- Improvements in the information exposed via debugfs.
- Basic tracepoints support.
- New interconnect driver for msm8916 platforms.
- Misc fixes.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.6-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: Add MSM8916 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
interconnect: Check for valid path in icc_set_bw()
interconnect: Print the tag in the debugfs summary
interconnect: Add interconnect_graph file to debugfs
interconnect: qcom: Use the standard aggregate function
interconnect: Add a common standard aggregate function
interconnect: Add basic tracepoints
interconnect: Add a name to struct icc_path
interconnect: Move internal structs into a separate file
interconnect: qcom: Use the new common helper for node removal
interconnect: Add a common helper for removing all nodes
Easily determining what TCG version a tpm device implements
has been a pain point for userspace for a long time, so
add a sysfs file to report the TCG major version of a tpm device.
Also add an entry to Documentation/ABI/stable/sysfs-class-tpm
describing the new file.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
All of the entries in Documentation/ABI/stable/sysfs-class-tpm
point to the old tpmdd-devel mailing list. This patch
updates the entries to point to linux-intergrity.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix typos in boottime-trace.rst according to Randy's suggestions.
Link: http://lkml.kernel.org/r/157949060335.25888.13153184562531693684.stgit@devnote2
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix typos in bootconfig.rst according to Randy's suggestions.
Link: http://lkml.kernel.org/r/157949059219.25888.16939971423610233631.stgit@devnote2
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Extend firmware interface for feature checking
- Use mailbox for communication with firmware for power management
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXibIfgAKCRDKSWXLKUoM
ISEiAJ0dOki4FCVTEloO1IIcbgY38SgvlwCfTSN4RQThu5iiG40ODZp4cJMaZmA=
=jGIz
-----END PGP SIGNATURE-----
Merge tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx into arm/drivers
arm64: soc: ZynqMP SoC changes for v5.6
- Extend firmware interface for feature checking
- Use mailbox for communication with firmware for power management
* tag 'zynqmp-soc-for-v5.6' of https://github.com/Xilinx/linux-xlnx:
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: firmware: xilinx: Add support for feature check
Link: https://lore.kernel.org/r/f6fb26f8-b00d-a3e8-bf7d-c7ff2a8483b1@monstr.eu
Signed-off-by: Olof Johansson <olof@lixom.net>
According to the Denali NAND Flash Memory Controller User's Guide,
this IP has two reset signals.
rst_n: reset most of FFs in the controller core
reg_rst_n: reset all FFs in the register interface, and in the
initialization sequencer
This commit specifies these reset signals.
It is possible to control them separately from the IP point of view
although they might be often tied up together in actual SoC integration.
At least for the upstream platforms, Altera/Intel SOCFPGA and Socionext
UniPhier, the reset controller seems to provide only 1-bit control for
the NAND controller. If it is the case, the resets property should
reference to the same phandles for "nand" and "reg" resets, like this:
resets = <&nand_rst>, <&nand_rst>;
reset-names = "nand", "reg";
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add IPI mailbox property and its example in xilinx zynqmp-power
documentation.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
New binding document for
Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P).
UDMA-P is introduced as part of the K3 architecture and can be found in
AM654 and j721e.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20191223110458.30766-10-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the provider and client documentation with details about the
metadata support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20191223110458.30766-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m1rI
-----END PGP SIGNATURE-----
Merge TI ringacc driver from Santosh
This is for dependency of new TI ringacc dmaengine drivers
Merge tag 'drivers_soc_for_5.6' into topic/ti
SOC: TI Keystone Ring Accelerator driver
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add an introduction to adfs to its documentation detailing which formats
are supported by the module.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- clean ups of unused code and debuggability
- add cmdq_instruction to make the function call interface more readable
- add functions for polling and providing info for the user of cmdq
scpsys:
- add bindings for MT6765
-----BEGIN PGP SIGNATURE-----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=Q9/6
-----END PGP SIGNATURE-----
Merge tag 'v5.5-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
cmdq:
- clean ups of unused code and debuggability
- add cmdq_instruction to make the function call interface more readable
- add functions for polling and providing info for the user of cmdq
scpsys:
- add bindings for MT6765
* tag 'v5.5-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
soc: mediatek: cmdq: add cmdq_dev_get_client_reg function
soc: mediatek: cmdq: add polling function
soc: mediatek: cmdq: define the instruction struct
soc: mediatek: cmdq: remove OR opertaion from err return
Link: https://lore.kernel.org/r/9b365e76-e346-f813-d750-d7cfd0d16e4e@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117060653.27485-2-qiangqing.zhang@nxp.com
Update dt-binding document for GPIO interrupt controller of Meson-A1 SoCs
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191216123645.10099-2-qianggui.song@amlogic.com
Document the Aspeed SCU interrupt controller and add an include file
for the interrupts it provides.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com
Add a DT binding documentation of SCP for the
MT8183 SoC from Mediatek.
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191112110330.179649-2-pihsun@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
We currently have a hidden dependency to the device tree node name for
the clkctrl clocks. Instead of using standard node name like "clock", we
must use "l4-per-clkctrl" type naming so the clock driver can find the
associated clock domain. Further, if "clk" is specified for a clock node
name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different
logic for the clock name based on the parent node name for the all the
clkctrl clocks for the SoC.
If the clock node naming dependency is not understood, the related
clockdomain is not found, or a wrong one can get used if a clock manager
has multiple clock domains.
As each clkctrl instance represents a single clock domain, let's allow
using domain specific compatible names to specify the clock domain.
This simplifies things and removes the hidden dependency to the node
name. And then later on, after the node names have been standardized,
we can drop the related code for parsing the node names.
Let's also update the binding to use standard "clock" node naming
instead of "clk" and add the missing description for reg.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Add binding for the TI's sdhci-omap controller present in am335x and
am437x devices.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116105154.7685-9-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci-omap can support both external dma controller via dmaengine
framework as well as ADMA which standard SD host controller
provides. Add binding documentation for these external dma properties.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200116105154.7685-2-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Most of the clock related dt-binding header files are located in
dt-bindings/clock folder. It would be good to keep all the similar
header files at a single location.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We carry a quirk in the x86 EFI code to switch back to an older
method of mapping the EFI runtime services memory regions, because
it was deemed risky at the time to implement a new method without
providing a fallback to the old method in case problems arose.
Such problems did arise, but they appear to be limited to SGI UV1
machines, and so these are the only ones for which the fallback gets
enabled automatically (via a DMI quirk). The fallback can be enabled
manually as well, by passing efi=old_map, but there is very little
evidence that suggests that this is something that is being relied
upon in the field.
Given that UV1 support is not enabled by default by the distros
(Ubuntu, Fedora), there is no point in carrying this fallback code
all the time if there are no other users. So let's move it into the
UV support code, and document that efi=old_map now requires this
support code to be enabled.
Note that efi=old_map has been used in the past on other SGI UV
machines to work around kernel regressions in production, so we
keep the option to enable it by hand, but only if the kernel was
built with UV support.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-8-ardb@kernel.org
+ sc7180 display + DSI support
+ a618 (sc7180) support
+ more UBWC (bandwidth compression) support
+ various cleanups to handle devices that use vs don't
use zap fw, etc
+ usual random cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvv03ifuP0tp7-dmqZtr1iS=s8Vc=az8BNGtEoSMD-dkw@mail.gmail.com
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
Add packet trap that can report NVE packets that the device decided to
drop because their overlay source MAC is multicast.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add packet traps that can report packets that were dropped during tunnel
decapsulation.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add packet trap that can report packets that reached the router, but are
non-routable. For example, IGMP queries can be flooded by the device in
layer 2 and reach the router. Such packets should not be routed and
instead dropped.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are
dropped for these reasons when they need to be routed through/from
existing router interfaces (RIF) which are disabled.
Add devlink driver-specific traps and mlxsw trap IDs used to report
these traps.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just a small set this time.
As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release. A short delay here will
do little harm.
New device support
* adis16480
- Add support for adis16490. After earlier rework this is simple ID plus
chip info.
Features
* kxcjk1013
- mount matrix support.
* lsm_6dsx
- mount matrix support.
Cleanups / minor or late breaking fixes
* ad7124
- add support to ad-sigma-delta and use it in this driver to allow
the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
using this framework.
* adis
- use delay structure now available in SPI to handle transfer delays
- introduce a timeouts structure to allow support of new devices
* ak8975
- drop platform data support. No one is using it and it adds complexity.
- use device_get_match_data rather than open coding much the same thing.
* dht11
- drop meaningless todo
* at91-samad2_adc
- switch to dma_request_chan
* altas-sensor
- add a helper function to compute number of channels. Needed for new device
support that is under review.
* bma400
- add a lower bound check on scale.
* inv_mpu6050
- add support for temperature data in the fifos for all chips.
- support an odd situation where a board supports only interrupt triggering
on both edges.
* st_lsm6dsx
- check and handle potential error return.
* st_sensors
- fix some values for the LSM9DS0 which is ever so slightly different from
other devices using the same whoami value.
- switch over to generic functions from dt ones, avoiding need for separate
ACPI support.
* stm32-adc
- switch to dma_request_chan
- suppress an error print in deferred probe case.
* stm32-dac
- drop private data structure element for reset controller as only used in
probe.
- reflect more cleanly that the reset controller is optional whilst ensuring
that if is specified any errors are caught.
* stm32-dfsdm
- switch to dma_request_chan
- fix missing application of formatting to single conversions.
- ensure the sampling rate is updated when the oversampling ratio is changed.
-----BEGIN PGP SIGNATURE-----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=/q/r
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and minor fixes for IIO in the 5.6 cycle
Just a small set this time.
As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release. A short delay here will
do little harm.
New device support
* adis16480
- Add support for adis16490. After earlier rework this is simple ID plus
chip info.
Features
* kxcjk1013
- mount matrix support.
* lsm_6dsx
- mount matrix support.
Cleanups / minor or late breaking fixes
* ad7124
- add support to ad-sigma-delta and use it in this driver to allow
the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
using this framework.
* adis
- use delay structure now available in SPI to handle transfer delays
- introduce a timeouts structure to allow support of new devices
* ak8975
- drop platform data support. No one is using it and it adds complexity.
- use device_get_match_data rather than open coding much the same thing.
* dht11
- drop meaningless todo
* at91-samad2_adc
- switch to dma_request_chan
* altas-sensor
- add a helper function to compute number of channels. Needed for new device
support that is under review.
* bma400
- add a lower bound check on scale.
* inv_mpu6050
- add support for temperature data in the fifos for all chips.
- support an odd situation where a board supports only interrupt triggering
on both edges.
* st_lsm6dsx
- check and handle potential error return.
* st_sensors
- fix some values for the LSM9DS0 which is ever so slightly different from
other devices using the same whoami value.
- switch over to generic functions from dt ones, avoiding need for separate
ACPI support.
* stm32-adc
- switch to dma_request_chan
- suppress an error print in deferred probe case.
* stm32-dac
- drop private data structure element for reset controller as only used in
probe.
- reflect more cleanly that the reset controller is optional whilst ensuring
that if is specified any errors are caught.
* stm32-dfsdm
- switch to dma_request_chan
- fix missing application of formatting to single conversions.
- ensure the sampling rate is updated when the oversampling ratio is changed.
* tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (29 commits)
iio: dac: stm32-dac: better handle reset controller failures
iio: dac: stm32-dac: use reset controller only at probe time
dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
iio: accel: kxcjk1013: Support orientation matrix
iio: imu: st_lsm6dsx: add mount matrix support
iio: adc: stm32-adc: don't print an error on probe deferral
dt-bindings: iio: adis16480: add compatible entry for ADIS16490
iio: imu: adis16480: Add support for ADIS16490
iio: accel: bma400: prevent setting accel scale too low
iio: imu/mpu6050: support dual-edge IRQ
iio: imu: inv_mpu6050: add fifo temperature data support
iio: magnetometer: ak8975: Convert to use device_get_match_data()
iio: magnetometer: ak8975: Get rid of platform data
iio: adc: ad7124: Set IRQ type to falling
iio: adc: ad-sigma-delta: Allow custom IRQ flags
iio: imu: adis: use new `delay` structure for SPI transfer delays
iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
iio: adc: stm32-dfsdm: fix single conversion
iio: st_sensors: Make use of device properties
iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
...
Here are some small fixes for 5.5-rc7
Included here are:
- two lkdtm fixes
- coresight build fix
- Documentation update for the hw process document
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXiMRTA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl/wQCfZWeba9TGl++stdgDCjwCI7iqwL4AniHwhzWw
h5G+rq9ZvbDDT9BT4tSi
=MOkg
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small fixes for 5.5-rc7
Included here are:
- two lkdtm fixes
- coresight build fix
- Documentation update for the hw process document
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Add Amazon contact for embargoed hardware issues
lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
lkdtm/bugs: Make double-fault test always available
coresight: etm4x: Fix unused function warning
The generic IIO mount-matrix property conveys physical orientation of the
hardware chip.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Now that we have new LOOKUP flags, we should document them in the
relevant path-walking documentation. And now that we've settled on a
common name for nd_jump_link() style symlinks ("magic links"), use that
term where magic-link semantics are described.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This round we have bunch of updates to interfaces for ASoC (audio)
subsystem by Intel and a new Qualcomm controller driver
Details
- Updates for sdw_slave interfaces for ASoC
- Updates to cadence library and intel driver
- New Soundwire controller for Qualcomm masters
- Rework of device number assignment
-----BEGIN PGP SIGNATURE-----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=PDic
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.6-rc1
This round we have bunch of updates to interfaces for ASoC (audio)
subsystem by Intel and a new Qualcomm controller driver
Details
- Updates for sdw_slave interfaces for ASoC
- Updates to cadence library and intel driver
- New Soundwire controller for Qualcomm masters
- Rework of device number assignment
* tag 'soundwire-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (27 commits)
dt-bindings: soundwire: fix example
soundwire: cadence: fix kernel-doc parameter descriptions
soundwire: intel: report slave_ids for each link to SOF driver
soundwire: intel: fix factor of two in MCLK handling
soundwire: bus: fix device number leak on errors
soundwire: cadence: remove useless variable incrementation
soundwire: cadence: update kernel-doc parameter descriptions
soundwire: qcom: add support for SoundWire controller
dt-bindings: soundwire: add bindings for Qcom controller
soundwire: bus: check first if Slaves become UNATTACHED
soundwire: cadence_master: handle multiple status reports per Slave
soundwire: cadence_master: remove config update for interrupt setting
soundwire: cadence_master: log more useful information during timeouts
soundwire: cadence_master: clear interrupt status before enabling interrupt
soundwire: cadence_master: filter out bad interrupts
soundwire: stream: remove redundant pr_err traces
soundwire: intel: add clock stop quirks
soundwire: intel: add mutex for shared SHIM register access
soundwire: intel: add prototype for WAKEEN interrupt processing
soundwire: intel: add link_list to handle interrupts with a single thread
...
This change adds an entry for ADIS16490 in the list of compatible devices
defined in the dt-bindings of the adis16480 driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This function supports iterating over a range of an array. Also add
documentation links for xa_for_each_start().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Setting 0x40 in /sys/fs/f2fs/dev/ipu_policy gives a way to turn off
bio cache, which is useufl to check whether block layer using hardware
encryption engine merges IOs correctly.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When ext4 encryption support was first added, ZERO_RANGE was disallowed,
supposedly because test failures (e.g. ext4/001) were seen when enabling
it, and at the time there wasn't enough time/interest to debug it.
However, there's actually no reason why ZERO_RANGE can't work on
encrypted files. And it fact it *does* work now. Whole blocks in the
zeroed range are converted to unwritten extents, as usual; encryption
makes no difference for that part. Partial blocks are zeroed in the
pagecache and then ->writepages() encrypts those blocks as usual.
ext4_block_zero_page_range() handles reading and decrypting the block if
needed before actually doing the pagecache write.
Also, f2fs has always supported ZERO_RANGE on encrypted files.
As far as I can tell, the reason that ext4/001 was failing in v4.1 was
actually because of one of the bugs fixed by commit 36086d43f6 ("ext4
crypto: fix bugs in ext4_encrypted_zeroout()"). The bug made
ext4_encrypted_zeroout() always return a positive value, which caused
unwritten extents in encrypted files to sometimes not be marked as
initialized after being written to. This bug was not actually in
ZERO_RANGE; it just happened to trigger during the extents manipulation
done in ext4/001 (and probably other tests too).
So, let's enable ZERO_RANGE on encrypted files on ext4.
Tested with:
gce-xfstests -c ext4/encrypt -g auto
gce-xfstests -c ext4/encrypt_1k -g auto
Got the same set of test failures both with and without this patch.
But with this patch 6 fewer tests are skipped: ext4/001, generic/008,
generic/009, generic/033, generic/096, and generic/511.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191226154216.4808-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m1rI
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone Ring Accelerator driver
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x SoCs.
* tag 'drivers_soc_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: ti: k3: add navss ringacc driver
bindings: soc: ti: add documentation for k3 ringacc
Link: https://lore.kernel.org/r/1579205259-4845-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The driver is named "mlxsw", not "mlx5".
Fixes: d4255d7585 ("devlink: document info versions for each driver")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Detailed description for this pull request:
1. Update devfreq core
- Add new 'name' attribute of sysfs to show the device name
: /sys/class/devfreq/devfreqX/name
- Make 'trans_stat' sysfs resetting by entering zero(0) as following
: echo 0 > /sys/class/devfreq/devfreqX/trans_stat
- Add debugfs support with 'devfreq_summary' file to show the summary
: /sys/kernel/debug/devfreq/devfreq_summary
- Change the type of time variable to 64bit to prevent the overflow
- Make the separate devfreq_stats including the statistics information
- Fix the minor coding-style like indentation and kernel-doc warnings
2. Update devfreq driver
- Add new imx8m-ddrc.c devfreq driver for dynamic scaling of DDR frequency.
It changes the DDR frequency by using ARM SMCCC(SMC Calling Convention)
interface to control TF-A firmware.
- Add COMPILE_TEST dependency for rk3399_dmc.c
- Clean-up code for exynos-bus.c and rk3399_dmc.c without behavior changes
3. Update devfreq-event driver
- Fix excessive stack usage of exynos-ppmu.c and clean-up code of
rockchip-dfi.c without behavior changes
-----BEGIN PGP SIGNATURE-----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=m9LV
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq updates for v5.6 from Chanwoo Choi:
"1. Update devfreq core
- Add new 'name' attribute of sysfs to show the device name
: /sys/class/devfreq/devfreqX/name
- Make 'trans_stat' sysfs reset by entering zero(0)
: echo 0 > /sys/class/devfreq/devfreqX/trans_stat
- Add debugfs support with 'devfreq_summary' to show the summary
: /sys/kernel/debug/devfreq/devfreq_summary
- Change the type of time variable to 64bit to avoid overflows.
- Make separate devfreq_stats including the statistics information.
- Fix minor coding-style like indentation and kernel-doc warnings.
2. Update devfreq drivers
- Add new imx8m-ddrc.c devfreq driver for dynamic scaling of DDR frequency.
It changes the DDR frequency by using ARM SMCCC(SMC Calling Convention)
interface to control TF-A firmware.
- Add COMPILE_TEST dependency for rk3399_dmc.c.
- Clean-up code for exynos-bus.c and rk3399_dmc.c without behavior changes
3. Update devfreq-event drivers
- Fix excessive stack usage of exynos-ppmu.c and clean-up code of
rockchip-dfi.c without behavior changes."
* tag 'devfreq-next-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (24 commits)
PM / devfreq: Add debugfs support with devfreq_summary file
PM / devfreq: exynos: Rename Exynos to lowercase
PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event
PM / devfreq: exynos-bus: Disable devfreq-event device when fails
PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails
PM / devfreq: imx8m-ddrc: Remove unused defines
PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers
PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource
PM / devfreq: rk3399_dmc: Add missing of_node_put()
PM / devfreq: rockchip-dfi: Add missing of_node_put()
PM / devfreq: Fix multiple kernel-doc warnings
PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()
PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()
PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)
PM / devfreq: Move statistics to separate struct devfreq_stats
PM / devfreq: Add clearing transitions stats
PM / devfreq: Change time stats to 64-bit
PM / devfreq: Add new name attribute for sysfs
...
We maintain global statistics for an entire MDIO bus, as well as broken
down, per MDIO bus address statistics. Given that it is possible for
MDIO devices such as switches to access MDIO bus addresses for which
there is not a mdio_device instance created (therefore not a a
corresponding device directory in sysfs either), we also maintain
per-address statistics under the statistics folder. The layout looks
like this:
/sys/class/mdio_bus/../statistics/
transfers
errrors
writes
reads
transfers_<addr>
errors_<addr>
writes_<addr>
reads_<addr>
When a mdio_device instance is registered, a statistics/ folder is
created with the tranfers, errors, writes and reads attributes which
point to the appropriate MDIO bus statistics structure.
Statistics are 64-bit unsigned quantities and maintained through the
u64_stats_sync.h helper functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
*) Add support in PHY core to create link between PHY consumer and PHY
provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
configurations to be used between DisplayPort controller and
DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
occasional transaction failures, fix USB driver from crashing in
Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
fixing Kconfig indentation, duplicate writes in drivers etc.,
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=76zg
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 5.6
*) Add support in PHY core to create link between PHY consumer and PHY
provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
configurations to be used between DisplayPort controller and
DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
occasional transaction failures, fix USB driver from crashing in
Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
fixing Kconfig indentation, duplicate writes in drivers etc.,
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits)
dt-bindings: phy: Add PHY_TYPE_DP definition
phy: ti: j721e-wiz: Fix return value check in wiz_probe()
dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema
phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE
phy: ti: j721e-wiz: Manage typec-gpio-dir
dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
phy: cadence: Sierra: add phy_reset hook
phy: cadence: Sierra: remove redundant initialization of pointer regmap
phy: Add DisplayPort configuration options
phy: Enable compile testing for some of drivers
phy: mediatek: Fix Kconfig indentation
phy: intel-lgm-emmc: Add support for eMMC PHY
dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove()
phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz
phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
phy: cadence: Sierra: Check for PLL lock during PHY power on
phy: cadence: Sierra: Get reset control "array" for each link
...
Implement the H_SVM_INIT_ABORT hcall which the Ultravisor can use to
abort an SVM after it has issued the H_SVM_INIT_START and before the
H_SVM_INIT_DONE hcalls. This hcall could be used when Ultravisor
encounters security violations or other errors when starting an SVM.
Note that this hcall is different from UV_SVM_TERMINATE ucall which
is used by HV to terminate/cleanup an VM that has becore secure.
The H_SVM_INIT_ABORT basically undoes operations that were done
since the H_SVM_INIT_START hcall - i.e page-out all the VM pages back
to normal memory, and terminate the SVM.
(If we do not bring the pages back to normal memory, the text/data
of the VM would be stuck in secure memory and since the SVM did not
go secure, its MSR_S bit will be clear and the VM wont be able to
access its pages even to do a clean exit).
Based on patches and discussion with Paul Mackerras, Ram Pai and
Bharata Rao.
Signed-off-by: Ram Pai <linuxram@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
- add DDR clock controller
- GPU OPP updates
-----BEGIN PGP SIGNATURE-----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=CTqX
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.6
- add DDR clock controller
- GPU OPP updates
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP
ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP
ARM: dts: meson8b: fix the clock controller compatible string
ARM: dts: meson8b: add the DDR clock controller
ARM: dts: meson8: add the DDR clock controller
ARM: dts: meson: provide the XTAL clock using a fixed-clock
dt-bindings: clock: meson8b: add the clock inputs
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
* SCM major refactoring and cleanup
* Properly flag active only power domains as active only
* Add SC7180 and SM8150 RPMH power domains
* Return EPROBE_DEFER from QMI if packet family is not yet available
-----BEGIN PGP SIGNATURE-----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=IcVk
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.6
* SCM major refactoring and cleanup
* Properly flag active only power domains as active only
* Add SC7180 and SM8150 RPMH power domains
* Return EPROBE_DEFER from QMI if packet family is not yet available
* tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
firmware: qcom_scm: Remove thin wrappers
firmware: qcom_scm: Order functions, definitions by service/command
firmware: qcom_scm-32: Add device argument to atomic calls
firmware: qcom_scm-32: Create common legacy atomic call
firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
firmware: qcom_scm-32: Add funcnum IDs
firmware: qcom_scm-32: Use SMC arch wrappers
firmware: qcom_scm-64: Improve SMC convention detection
firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc
firmware: qcom_scm-64: Add SCM results struct
firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
firmware: qcom_scm-64: Make SMC macros less magical
firmware: qcom_scm: Remove unused qcom_scm_get_version
firmware: qcom_scm: Apply consistent naming scheme to command IDs
firmware: qcom_scm: Rename macros and structures
soc: qcom: rpmhpd: Set 'active_only' for active only power domains
firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available
dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml
...
Link: https://lore.kernel.org/r/20200113204405.GD3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>
It's fairly big this time, but the highlights are:
- Enable cpufreq and CPU thermal throttling on the A64
- CLK_CPUX macro usage removed (changed from first pull request)
- CSI0 support on the R40
- CSI1 support on the A10 and A20
- SPI support on the R40
- PMU support on the H3, H5, H6 and R40
- MIPI-DSI support on the A64
- PWM support on the H6
- Thermal sensor on the A64, A83t, H3, H5, H6 and R40
- More DT schemas fixes and conversions
- New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
Pine64 H64 Model B, Neutis N5H3
-----BEGIN PGP SIGNATURE-----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=1h4A
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This is our usual set of DT patches for the Allwinner SoCs.
It's fairly big this time, but the highlights are:
- Enable cpufreq and CPU thermal throttling on the A64
- CLK_CPUX macro usage removed (changed from first pull request)
- CSI0 support on the R40
- CSI1 support on the A10 and A20
- SPI support on the R40
- PMU support on the H3, H5, H6 and R40
- MIPI-DSI support on the A64
- PWM support on the H6
- Thermal sensor on the A64, A83t, H3, H5, H6 and R40
- More DT schemas fixes and conversions
- New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5,
Pine64 H64 Model B, Neutis N5H3
* tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits)
arm64: dts: allwinner: a64: enable DVFS
arm64: dts: allwinner: a64: add dtsi with CPU operating points
arm64: dts: allwinner: a64: add cooling maps and thermal tripping points
arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes
arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks
ARM: dts: sunxi: Use macros for references to CCU clocks
arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board
ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
arm64: dts: allwinner: a64: pinebook: Fix lid wakeup
ARM: dts: sun8i: r40: Add device node for CSI0
ARM: dts: sun7i: Add CSI1 controller and pinmux options
ARM: dts: sun4i: Add CSI1 controller and pinmux options
ARM: dts: sunxi: Add missing LVDS resets and clocks
ARM: dts: sun8i: r40: Use tcon top clock index macros
ARM: dts: sun8i: R40: Add PMU node
ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
arm64: dts: allwinner: h6: Add thermal sensor and thermal zones
ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board
arm64: dts: allwinner: a64: Add MIPI DSI pipeline
arm64: dts: allwinner: a64: Add thermal sensors and thermal zones
...
Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The sysfs attribute `/sys/power/sync_on_suspend` controls, whether or not
filesystems are synced by the kernel before system suspend.
Congruously, the behaviour of build-time switch CONFIG_SUSPEND_SKIP_SYNC
is slightly changed: It now defines the run-tim default for the new sysfs
attribute `/sys/power/sync_on_suspend`.
The run-time attribute is added because the existing corresponding
build-time Kconfig flag for (`CONFIG_SUSPEND_SKIP_SYNC`) is not flexible
enough. E.g. Linux distributions that provide pre-compiled kernels
usually want to stick with the default (sync filesystems before suspend)
but under special conditions this needs to be changed.
One example for such a special condition is user-space handling of
suspending block devices (e.g. using `cryptsetup luksSuspend` or `dmsetup
suspend`) before system suspend. The Kernel trying to sync filesystems
after the underlying block device already got suspended obviously leads
to dead-locks. Be aware that you have to take care of the filesystem sync
yourself before suspending the system in those scenarios.
Signed-off-by: Jonas Meurer <jonas@freesources.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
QTI SDAM allows PMIC peripherals to access the shared memory that is
available on QTI PMICs. Add documentation for it.
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200116161100.30637-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The example given in asm-annotations.rst to describe the constraints that
a function should meet in order to be annotated with a SYM_FUNC_* macro
is x86-specific, and not necessarily applicable to architectures using
branch-and-link style calling conventions such as arm64.
Tweak the example text to call out the x86-specific text.
Cc: Mark Brown <broonie@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200115184305.1187-1-will@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch converts nfs.txt to RST. It also moves it to admin-guide.
The reason for moving it is because this document contains information
useful for system administrators, as noted on the following paragraph:
'The purpose of this document is to provide information on some of the
special features of the NFS client that can be configured by system
administrators'.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Link: https://lore.kernel.org/r/cb9f2da2f2f6dd432b4cf9e05f79f74f4d54b6ab.1578697871.git.dwlsalmeida@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This contains a conversion of the Tegra124 EMC bindings to json-schema
as well as the addition of the bindings for the memory subsystem found
on Tegra186 and Tegra194.
-----BEGIN PGP SIGNATURE-----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=iPZ2
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.6-rc1
This contains a conversion of the Tegra124 EMC bindings to json-schema
as well as the addition of the bindings for the memory subsystem found
on Tegra186 and Tegra194.
* tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add Tegra186 memory subsystem
dt-bindings: memory: Add Tegra194 memory controller header
dt-bindings: memory: Add Tegra186 memory client IDs
dt-bindings: memory-controller: Convert Tegra124 EMC to json-schema
Link: https://lore.kernel.org/r/20200111003553.2411874-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Add driver for Microchip PIT64B timer. Timer could be used in continuous
mode or oneshot mode. The hardware has 2x32 bit registers for period
emulating a 64 bit timer. The LSB_PR and MSB_PR registers are used to
set the period value (compare value). TLSB and TMSB keeps the current
value of the counter. After a compare the TLSB and TMSB register resets.
The driver uses PIT64B timer for clocksource or clockevent. First
requested timer would be registered as clockevent, second one would be
registered as clocksource. Individual PIT64B hardware resources were
used for clocksource and clockevent to be able to support high resolution
timers with this hardware implementation.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1576235962-30123-3-git-send-email-claudiu.beznea@microchip.com
As wsa881x schema mentions #sound-dai-cells as required property,
so update soundwire-controller.yaml example so that dt_bindings_check
does not fail as below:
Documentation/devicetree/bindings/soundwire/soundwire-controller.example.dt.yaml:
speaker@0,1: '#sound-dai-cells' is a required property
Documentation/devicetree/bindings/soundwire/soundwire-controller.example.dt.yaml:
speaker@0,2: '#sound-dai-cells' is a required property
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200114094806.15846-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cortex-A55 erratum 1530923 allows TLB entries to be allocated as a
result of a speculative AT instruction. This may happen in the middle of
a guest world switch while the relevant VMSA configuration is in an
inconsistent state, leading to erroneous content being allocated into
TLBs.
The same workaround as is used for Cortex-A76 erratum 1165522
(WORKAROUND_SPECULATIVE_AT_VHE) can be used here. Note that this
mandates the use of VHE on affected parts.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
QEMU running in a stubdom needs to be able to set INTX_DISABLE, and the
MSI(-X) enable flags in the PCI config space. This adds an attribute
'allow_interrupt_control' which when set for a PCI device allows writes
to this flag(s). The toolstack will need to set this for stubdoms.
When enabled, guest (stubdomain) will be allowed to set relevant enable
flags, but only one at a time - i.e. it refuses to enable more than one
of INTx, MSI, MSI-X at a time.
This functionality is needed only for config space access done by device
model (stubdomain) serving a HVM with the actual PCI device. It is not
necessary and unsafe to enable direct access to those bits for PV domain
with the device attached. For PV domains, there are separate protocol
messages (XEN_PCI_OP_{enable,disable}_{msi,msix}) for this purpose.
Those ops in addition to setting enable bits, also configure MSI(-X) in
dom0 kernel - which is undesirable for PCI passthrough to HVM guests.
This should not introduce any new security issues since a malicious
guest (or stubdom) can already generate MSIs through other ways, see
[1] page 8. Additionally, when qemu runs in dom0, it already have direct
access to those bits.
This is the second iteration of this feature. First was proposed as a
direct Xen interface through a new hypercall, but ultimately it was
rejected by the maintainer, because of mixing pciback and hypercalls for
PCI config space access isn't a good design. Full discussion at [2].
[1]: https://invisiblethingslab.com/resources/2011/Software%20Attacks%20on%20Intel%20VT-d.pdf
[2]: https://xen.markmail.org/thread/smpgpws4umdzizze
[part of the commit message and sysfs handling]
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
[the rest]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
[boris: A few small changes suggested by Roger, some formatting changes]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Review of the recently added documentation file for the qed driver
noticed a couple of typos. Fix them now.
Noticed-by: Michal Kalderon <mkalderon@marvell.com>
Fixes: 0f261c3ca0 ("devlink: add a driver-specific file for the qed driver")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add interrupts and interrupt-names as optional properties
to support host-wakeup by interrupt properties instead of
host-wakeup-gpios.
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
i2c_new_device is deprecated, use i2c_new_client_device. Also, align a
paragraph while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c_new_device is deprecated, use i2c_new_client_device.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Fix keyboard brightness control for ASUS laptops
* Better handling parameters of GPD pocket fan module to avoid thermal shock
* Add IDs to PMC platform driver to support Intel Comet Lake
* Fix potential dead lock in Mellanox TM FIFO driver and ABI documentation
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Fix keyboard brightness cannot be set to 0
Documentation/ABI:
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel-ips:
- Use the correct style for SPDX License Identifier
intel_pmc_core:
- update Comet Lake platform driver
platform/mellanox:
- fix potential deadlock in the tmfifo driver
-----BEGIN PGP SIGNATURE-----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=zKPB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Fix keyboard brightness control for ASUS laptops
- Better handling parameters of GPD pocket fan module to avoid
thermal shock
- Add IDs to PMC platform driver to support Intel Comet Lake
- Fix potential dead lock in Mellanox TM FIFO driver and ABI
documentation
* tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86:
Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces
Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
platform/x86: intel_pmc_core: update Comet Lake platform driver
platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits
platform/x86: GPD pocket fan: Use default values when wrong modparams are given
platform/mellanox: fix potential deadlock in the tmfifo driver
platform/x86: intel-ips: Use the correct style for SPDX License Identifier
This commit adds "super-speed-plus" to valid argument list of
"maximum-speed" property.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to
enable straightforward passing of work between a producer and a consumer.
There is one RINGACC module per NAVSS on TI AM65x and j721e.
This patch introduces RINGACC device tree bindings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The justification of a light version of the parport driver was less
overhead for embedded systems. Well, today, even if an embedded system
still has a parport, it surely can handle the fully-fledged parport
driver. Remove it to reduce the maintenance burden.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
On Arm systems, some platform devices behind an SMMU may support the PASID
feature, which offers multiple address space. Let the firmware tell us
when a device supports PASID.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
This adds support for MediaTek musb controller in
host, peripheral and otg mode.
Signed-off-by: Min Guo <min.guo@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200115132547.364-20-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Export the features introduced as part of ARMv8.6 exposed in the
ID_AA64ISAR1_EL1 and ID_AA64ZFR0_EL1 registers. This introduces the
Matrix features (ARMv8.2-I8MM, ARMv8.2-F64MM and ARMv8.2-F32MM) along
with BFloat16 (Armv8.2-BF16), speculation invalidation (SPECRES) and
Data Gathering Hint (ARMv8.0-DGH).
Signed-off-by: Julien Grall <julien.grall@arm.com>
[Added other features in those registers]
Signed-off-by: Steven Price <steven.price@arm.com>
[will: Don't advertise SPECRES to userspace]
Signed-off-by: Will Deacon <will@kernel.org>
The text in this new document is a response to recurring questions
about the GPIO in-kernel API vs the userspace ABI. When do you use
one or the other? It can be a bit intuitive, but I tried to sum it
all up.
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200108001712.47500-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add an admin-guide document for the intel_idle driver to describe
how it works: how it enumerates idle states, what happens during the
initialization of it, how it can be controlled via the kernel command
line and so on.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Some functions support speeds other than SuperSpeed. Add max_speed
attribute to configfs gadget allowing user to specify the maximum speed
the composite driver supports. The valid input speed names are
super-speed-plus, super-speed, high-speed, full-speed, and low-speed.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add bq25892, bq25895 and bq25896 to list of supported device IDs in the
bq25890 DT binding document.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch adds an optional SLIMBus Interface device phandle property
that could be used by some of the SLIMBus devices.
Interface device is mostly used with devices that are dealing
with streaming.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200109103148.5612-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch set the correct value for oversampling maxItems. In the
original example, appears 3 items for oversampling while the maxItems
is set to 1, this patch fixes those issues.
Fixes: 416f882c3b ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add compatible string "fsl,imx8qm-asrc" for imx8qm platform,
"fsl,imx8qxp-asrc" for imx8qxp platform.
There are two asrc modules in imx8qm & imx8qxp, the clock mapping is
different for each other, so add new property "fsl,asrc-clk-map"
to distinguish them.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/b9352edb014c1ee8530c0fd8829c2b044b3da649.1575452454.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'interval_sub' is placed on the 'notifier_subscriptions' interval
tree.
This eliminates the poor name 'mni' for this variable.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert ingenic,jz4740-codec.txt and ingenic,jz4725b-codec.txt to one
single ingenic,codec.yaml file, since they share the same binding.
Add the ingenic,jz4770-codec compatible string in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191224002708.1207884-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
As the at25 uses the NVMEM subsystem, and the property is now being
handled, adding reference for it in the device tree binding document,
which allows to specify the GPIO line to which the write-protect pin
is connected.
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This reverts commit f5fa59a61e "regulator: bindings: add
document bindings for mpq7920" as Rob has a number of problems
with the use of DT schema.
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds bindings for Qualcomm soundwire controller.
Qualcomm SoundWire Master controller is present in most Qualcomm SoCs
either integrated as part of WCD audio codecs via slimbus or
as part of SOC I/O.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200113132153.27239-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Allwinner A80 SoCs have a USB PHY controller that is used by Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This is an optional GPIO, if specified will be used to
swap lane 0 and lane 1 based on GPIO status. This is required
to achieve plug flip support for USB Type-C.
Type-C companions typically need some time after the cable is
plugged before and before they reflect the correct status of
Type-C plug orientation on the DIR line.
Type-C Spec specifies CC attachment debounce time (tCCDebounce)
of 100 ms (min) to 200 ms (max).
Allow the DT node to specify the time (in ms) that we need
to wait before sampling the DIR line.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a YAML schema to use the host controller driver with the
eMMC PHY on Intel's Lightning Mountain SoC.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a
PHY but a wrapper used to configure some of the input signals to the
SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[jsarha@ti.com: Add separate compatible for Sierra(16G) and Torrent(10G)
SERDES]
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
This uses the new pata-common.yaml schema to
convert the Faraday FTIDE010 to DT schema.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
I need to create subnodes for drives connected to PATA
host controllers, and this needs to be supported generally,
so create a common YAML binding for "ide" that will support
subnodes with ports.
This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
I need to create subnodes for drives connected to SATA
host controllers, and this needs to be supported
generally, so create a common YAML binding for
"sata" that will support subnodes with ports.
This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[robh: fixup sata-port unit-address pattern]
Signed-off-by: Rob Herring <robh@kernel.org>
This fixes some problems that caused build errors in the
lgm-io schema file:
- No "bindings" infix in the schema id
- Move the allOf inclusion for pinconf and pinmux nodes into
the patternProperties for the -pins node
- We want "groups" not "group" to be compulsory for a pinmux
node blended with a pin config node.
- Fix the generic pinmux-schema to list "groups" rather than
"group" for a pinmux node, this might have led to some confusion.
This is a first user of the generic schema so a bit of a bumpy
road.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The firmware-name property in the zap node can be used to specify a
device specific zap firmware.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
gpio controller to control 5 gpios on the chip. This patch adds
required device tree bindings for it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200107130844.20763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".
Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add documentation for the new attributes for:
- Exposing reset causes types asserted by: platform reset, SoC reset,
AC power failure, software power off request.
- Setting and removing system VPD (EEPROM) hardware write protection.
- Voltage regulator devices configuration update status and firmware
version.
- Setting PCIe ASIC reset to disable or enable state during PCIe root
complex reset.
- System static topology identification, like system's static I2C
topology, number and type of FPGA devices within the system and so on.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Remove blank lines between "What" and "Date" keywords.
Start each section with "What" keyword.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".
Fixes: 2752e34442 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a documentation for extended boot config under
admin-guide, since it is including the syntax of boot config.
Link: http://lkml.kernel.org/r/157867230658.17873.9309879174829924324.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add the compatible enum entries for Gateworks Ventana boards.
Signed-off-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the clock binding doc for i.MX8MP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes, a documentation fix, and a removal of a spec
violation for the bus recovery algorithm in the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: fix bus recovery stop mode timing
i2c: bcm2835: Store pointer to bus clock
dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60
i2c: at91: fix clk_offset for sam9x60
A couple of locations accidentally misspelled snapshot as shapshot.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615 ("reset: Do not register resource data for missing
resets").
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXhg87xcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwKgqAQDLy40/GkWMZe6pv3Q6P5i8FyQZ
pSMcIKLP9Ig1bLdeRQD/YDjBbFVt9UbD7yLNJTkoNn3jJeg0bQo520yQ14NBHgM=
=LMjX
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.6
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615 ("reset: Do not register resource data for missing
resets").
* tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux:
reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristate
reset: Add Broadcom STB RESCAL reset controller
dt-bindings: reset: Document BCM7216 RESCAL reset controller
reset: intel: Add system reset controller driver
dt-bindings: reset: Add YAML schemas for the Intel Reset controller
reset: uniphier: Add SCSSI reset control for each channel
reset: Align logic and flow in managed helpers
reset: npcm: add NPCM reset controller driver
dt-bindings: reset: Add binding constants for NPCM7xx reset controller
dt-bindings: reset: add NPCM reset controller documentation
Link: https://lore.kernel.org/r/dbbb2ca7490a0146d9ba632fd4d9f38063e03e9f.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
We've created a vendor directory for sprd, so move the board bindings to
there.
Link: https://lore.kernel.org/r/20200110063755.19804-2-zhang.lyra@gmail.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.
The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.
Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl4Xm7MQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXPbB/4/iuGhWfydiiB6Mrmeifzlt+Ch7Hm5IJBA
03f8FiHbGkW1Tlh1buw6t9BDKI0XKNqD94MU0pya4yDB7baFaH1GEk8S4/mbEAuE
OZnWM0jzQ40b/1JmwRCw0PL2NTFHwlE+SSHnBJ4EW/OnOsCYUSz8+Aq33fMwdsPA
Dm9gxAeeHsBJTxk26cxLrGePB5vYXltGwazklkKkU5scV75sfJu1xcRKcnVp71sH
4j33aWi19GWo2YkW6RGXzTgiXoFPR+PgzfU337KTqq6A5oSIybH9g2WUnYyAxi8R
tJKxiOBSBeGIrIRxMWtw8g9VxohJwzHfi9y4XO1VwzLpl/SQf3mb
=iCh7
-----END PGP SIGNATURE-----
Merge tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.
The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.
Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.
* tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (37 commits)
arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options
arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node
arm64: dts: rockchip: Add PX30 LVDS
arm64: dts: rockchip: add dsi controller for px30
arm64: dts: rockchip: Add PX30 DSI DPHY
arm64: dts: rockchip: Add RK3328 idle state
arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou
arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support
ARM: dts: rockchip: Add Radxa Dalang Carrier board
arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N10 binding
arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64
arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64
arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards
arm64: dts: rockchip: enable the gpu on px30-evb
arm64: dts: rockchip: add the gpu for px30
dt-bindings: gpu: mali-bifrost: Add Rockchip PX30
arm64: dts: rockchip: Add GPU cooling device for RK3399
arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board
...
Link: https://lore.kernel.org/r/5115625.yBEeHQkg2z@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
Now that devlink regions can be triggered via
DEVLINK_CMD_REGION_TRIGGER, document this in the devlink-region.rst
file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Primarily based on the DPIPE netdev conference paper, introduce a new
file to document the dpipe interface.
This likely needs further improvement, but is at least a good overall
start.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take the little bit of documentation for resources from various commit
messages and combine it into a new devlink-resource.rst file.
This could probably be expanded on even further by someone with more
knowledge of how the devlink resources work.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the trap-specific netdevimsim.rst file, and expand it to include
documentation of all the devlink features currently implemented by the
netdevsim driver code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IONIC device driver allocates a devlink and reports versions. Add
documentation for this driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Shannon Nelson <snelson@pensando.io>
Acked-by: Shannon Nelson <snelson@pensandi.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also document the regions created by the mlx4 driver. This is currently
the only in-tree driver that creates devlink region snapshots.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qed driver recently added devlink support with a single devlink
parameter. Add a driver-specific file to document the devlink features
that the qed driver supports.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlx5 and mlxsw drivers have driver-specific documentation for the
devlink features they support. No such file was added for mlx4.
Add a file to document the mlx4 devlink support. Initially it contains
only the devlink parameters.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the set of info versions reported by each device driver, including
a description of what the version represents, and what modes (fixed,
running, stored) it reports.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several drivers document what parameters they support in
a devlink-params-*.txt file. This file is supposed to contain both the
list of generic parameters implemented by the driver, as well as a list
of driver-specific parameters and their descriptions.
It would also be good if the driver documentation included other
driver-specific implementations, such as info versions, devlink
regions, and so forth.
Convert all of these documentation files to reStructuredText, and rename
them to just the driver name. Future changes will include other
driver-specific implementations. Each file will contain a table for the
generic parameters implemented, as well as a separate table for the
driver-specific parameters.
Future sections such as for devlink info versions will be added to these
files. This avoids creating additional devlink-<feature>-<driver> files
for each devlink feature, reducing clutter in the documentation folder.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mention that drivers must support devlink-reload in order for driverinit
parameters to function properly
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few generic devlink parameters have been added, but never documented.
Fix that now.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the generic parameters descriptions into the reStructuredText
format.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the devlink-info-versions.rst file to a plain devlink-info.rst
file. Add additional paragraphs explaining what devlink-info is for,
and the expectation that drivers use the generic names where plausible.
Note that drivers which use non-standard info version names ought to
document these in a driver-specific info-versions.rst file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the devlink-health documentation to use the newer
ReStructuredText format.
Note that it's unclear what OOB stood for, and it has been left as-is
without a proper first-use expansion of the acronym.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
Lm0mvE8=
=NECs
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rc5' into next
Sync up with mainline to get SPI "delay" API changes.
The current driver behaviour was to enable the wakeup-source everytime.
After discussion [1] we decided to change that behaviour so the device
will act as wakeup-source only if the "wakeup-source" dt-property is
present.
The patch adds the binding documentation to enable the wakeup-source
capability.
[1] https://patchwork.kernel.org/patch/11149037/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Converts vfat.txt to the reStructuredText format, improving presentation
without changing the underlying content.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
-----------------------------------------------------------
Changes in v3:
Removed unnecessary markup.
Removed section "BUG REPORTS" as recommended by the maintainer.
Changes in v2:
Refactored long lines as pointed out by Jonathan
Copied the maintainer
Updated the reference in the MAINTAINERS file for vfat
I did not move this into admin-guide, waiting on what the
maintainer has to say about this and also about old sections
in the text, if any.
Link: https://lore.kernel.org/r/20191223010030.434902-1-dwlsalmeida@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add an option to disable the busmaster bit in the control register on
all PCI bridges before calling ExitBootServices() and passing control
to the runtime kernel. System firmware may configure the IOMMU to prevent
malicious PCI devices from being able to attack the OS via DMA. However,
since firmware can't guarantee that the OS is IOMMU-aware, it will tear
down IOMMU configuration when ExitBootServices() is called. This leaves
a window between where a hostile device could still cause damage before
Linux configures the IOMMU again.
If CONFIG_EFI_DISABLE_PCI_DMA is enabled or "efi=disable_early_pci_dma"
is passed on the command line, the EFI stub will clear the busmaster bit
on all PCI bridges before ExitBootServices() is called. This will
prevent any malicious PCI devices from being able to perform DMA until
the kernel reenables busmastering after configuring the IOMMU.
This option may cause failures with some poorly behaved hardware and
should not be enabled without testing. The kernel commandline options
"efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma" may be
used to override the default. Note that PCI devices downstream from PCI
bridges are disconnected from their drivers first, using the UEFI
driver model API, so that DMA can be disabled safely at the bridge
level.
[ardb: disconnect PCI I/O handles first, as suggested by Arvind]
Co-developed-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <matthewgarrett@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-18-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix WARNING: Inline emphasis start-string without end-string.
This warning was due to wrong syntax being used.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Link: https://lore.kernel.org/r/20191223033121.1584930-1-dwlsalmeida@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The use of iff ("if and only if") notation is not accurate in this case.
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Frank A. Cancio Bello <frank@generalsoftwareinc.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/22f9a98a972c3155c7b478247a087a5efafde774.1577231751.git.frank@generalsoftwareinc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current text could mislead the user into believing that the number
of pages allocated by each CPU ring buffer is calculated by the round
up of the division: buffer_size_kb / PAGE_SIZE.
Clarifies that a few extra pages may be allocated to accommodate buffer
management meta-data.
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Suggested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frank A. Cancio Bello <frank@generalsoftwareinc.com>
Link: https://lore.kernel.org/r/6f33be5f3d60e5ffc061d8d2b329d3d3ccf22a8c.1577231751.git.frank@generalsoftwareinc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add compatible and necessary clocks and resets definitions for the
SDM845 PCIe controller.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
This adds power dt-bindings for MT6765
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Throttle thermal policy ACPI device is used to control CPU cooling and
throttling. This patch adds sysfs entry for setting current mode and
Fn+F5 hotkey that switches to next.
Policy modes:
* 0x00 - default
* 0x01 - overboost
* 0x02 - silent
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
New device support
* ad7091r5 ADC
- New driver with follow up patch adding scale and vref support.
- DT bindings
* ad7923
- Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
- Support the BMA254 accelerometer. Required fairly substantial rework
to allow for small differences between this an existing parts.
* bma400 accelerometer
- New driver with follow up patch for regulator support.
- DT bindings.
* asc dlhl60d
- New driver support this range of pressure and temperature sensors.
- DT bindings.
* ltc2496 ADC
- New driver to support this ADC.
- Split the existing LTC2497 driver generic component out and reuse.
- DT bindings.
* parallax ping
- New driver supporting ultrasonic and laser tof distance sensors.
- Bindings for these sensors.
New features
* core
- New char type for read_raw returns, used for thermocouple types.
- Rename read_first_n callback to read. The reasons behind the original
naming are lost to the mists of time.
* ad799x
- Allow pm_ops to disable device completely allowing regulator power down.
* bma180
- Enable basic regulator support.
* dmaengine buffer
- Report platform data alignment requirements via new ABI.
* max31856
- Add option to set mains filter rejection frequency and document
new in_temp_filter_notch_center_frequency ABI.
- Add support for configuring HW averaging (oversampling ratio)
- Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
- Add read only access to thermocouple type using new ABI, includes
adding more specific compatibles to reflect which variant of the
chip is being used.
* mpu6050
- Provide option to support the PMU9150 in package magnetometer directly
rather than via auxiliary bus.
* stm32_adc
- Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
- Enable the sensor-hub support for lsm6dsm. Includes various reworks to
allow this.
Cleanups and minor fixes
* Subsystem wide
- Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
- Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
- Convert to GPIO descriptors.
* ad7303
- Avoid a dance with checking if the regulator is supplied by just
using the optional request interface.
* ad7887
- Simplify channel specification assignment to enable adding more devices.
* ad7923
- Drop some unused and largely pointless defines of BOB_N==N variety.
- Tidy up checkpatch warnings.
- Add missing of_device_id table.
* adf4350
- Convert to GPIO descriptors.
* ak8975
- Convert to GPIO descriptors.
* ADIS library and drivers
- Expand scope of txrx_lock to cover all state and rename as state_lock
- Add unlocked read / write to allow grouping of consecutive calls under
single lock / unlock.
- Add unlocked check_status, reset to allow grouping under single
lock / unlock.
- Remove remaining uses of core mlock for local state protection.
mlock should never be used directly as it protects tightly defined
core IIO device management state.
* adis16240
- Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
- Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
- Use local dev variable to tidy up code.
- Use c99 style explicity .member assignment to make driver more readable.
* bmp280
- Drop ACPI support. No evidence this was used and appropriate ID is not
registered.
- Allow ACPI to bind device via PRP0001
* dmaengine buffer
- Use dma_request_chan instead of dma_request_slave_channel_reason as that
ABI is going away.
- Add module info to avoid tainting the kernel.
* hts221
- Avoid magic number defines when only used to fill structure elements
that are self describing.
* lm3533
- Drop a stray semicolon.
* max9611
- Cleanup enum handling to be more resilient to future changes.
* mpu6050
- Delete MPU9150 from supported SPI devices as doesn't provide SPI.
- Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
- Drop an unnecessary register update.
* ssp_sensors
- Convert to GPIO descriptors.
* st_sensors
- drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
anyway.
- Make default platform data structures __maybe_unsued.
- Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
- white space fixes.
- Mark some constants that aren't always used as __maybe_unused.
- Drop of ID table guards as they just pervent use under ACPI.
- Switch to device properties to allow ACPI usage.
* st_uvis25
- Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
- Drop legacy platform data as no one seems to be using it.
- Use the device property API instead of OF specific.
* ti-ads7950
- typo fix in error message.
-----BEGIN PGP SIGNATURE-----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=8FmM
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.6 cycle
New device support
* ad7091r5 ADC
- New driver with follow up patch adding scale and vref support.
- DT bindings
* ad7923
- Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
- Support the BMA254 accelerometer. Required fairly substantial rework
to allow for small differences between this an existing parts.
* bma400 accelerometer
- New driver with follow up patch for regulator support.
- DT bindings.
* asc dlhl60d
- New driver support this range of pressure and temperature sensors.
- DT bindings.
* ltc2496 ADC
- New driver to support this ADC.
- Split the existing LTC2497 driver generic component out and reuse.
- DT bindings.
* parallax ping
- New driver supporting ultrasonic and laser tof distance sensors.
- Bindings for these sensors.
New features
* core
- New char type for read_raw returns, used for thermocouple types.
- Rename read_first_n callback to read. The reasons behind the original
naming are lost to the mists of time.
* ad799x
- Allow pm_ops to disable device completely allowing regulator power down.
* bma180
- Enable basic regulator support.
* dmaengine buffer
- Report platform data alignment requirements via new ABI.
* max31856
- Add option to set mains filter rejection frequency and document
new in_temp_filter_notch_center_frequency ABI.
- Add support for configuring HW averaging (oversampling ratio)
- Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
- Add read only access to thermocouple type using new ABI, includes
adding more specific compatibles to reflect which variant of the
chip is being used.
* mpu6050
- Provide option to support the PMU9150 in package magnetometer directly
rather than via auxiliary bus.
* stm32_adc
- Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
- Enable the sensor-hub support for lsm6dsm. Includes various reworks to
allow this.
Cleanups and minor fixes
* Subsystem wide
- Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
- Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
- Convert to GPIO descriptors.
* ad7303
- Avoid a dance with checking if the regulator is supplied by just
using the optional request interface.
* ad7887
- Simplify channel specification assignment to enable adding more devices.
* ad7923
- Drop some unused and largely pointless defines of BOB_N==N variety.
- Tidy up checkpatch warnings.
- Add missing of_device_id table.
* adf4350
- Convert to GPIO descriptors.
* ak8975
- Convert to GPIO descriptors.
* ADIS library and drivers
- Expand scope of txrx_lock to cover all state and rename as state_lock
- Add unlocked read / write to allow grouping of consecutive calls under
single lock / unlock.
- Add unlocked check_status, reset to allow grouping under single
lock / unlock.
- Remove remaining uses of core mlock for local state protection.
mlock should never be used directly as it protects tightly defined
core IIO device management state.
* adis16240
- Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
- Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
- Use local dev variable to tidy up code.
- Use c99 style explicity .member assignment to make driver more readable.
* bmp280
- Drop ACPI support. No evidence this was used and appropriate ID is not
registered.
- Allow ACPI to bind device via PRP0001
* dmaengine buffer
- Use dma_request_chan instead of dma_request_slave_channel_reason as that
ABI is going away.
- Add module info to avoid tainting the kernel.
* hts221
- Avoid magic number defines when only used to fill structure elements
that are self describing.
* lm3533
- Drop a stray semicolon.
* max9611
- Cleanup enum handling to be more resilient to future changes.
* mpu6050
- Delete MPU9150 from supported SPI devices as doesn't provide SPI.
- Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
- Drop an unnecessary register update.
* ssp_sensors
- Convert to GPIO descriptors.
* st_sensors
- drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
anyway.
- Make default platform data structures __maybe_unsued.
- Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
- white space fixes.
- Mark some constants that aren't always used as __maybe_unused.
- Drop of ID table guards as they just pervent use under ACPI.
- Switch to device properties to allow ACPI usage.
* st_uvis25
- Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
- Drop legacy platform data as no one seems to be using it.
- Use the device property API instead of OF specific.
* ti-ads7950
- typo fix in error message.
* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
iio: accel: bma180: BMA254 support
iio: pressure: bmp280: Allow device to be enumerated from ACPI
iio: pressure: bmp280: Drop ACPI support
dt-bindings: iio: adc: convert sd modulator to json-schema
iio: buffer: rename 'read_first_n' callback to 'read'
iio: buffer-dmaengine: Report buffer length requirements
bindings: iio: pressure: Add documentation for dlh driver
dt-bindings: Add asc vendor
iio: pressure: Add driver for DLH pressure sensors
iio: buffer-dmaengine: Add module information
iio: accel: bma180: Use explicit member assignment
iio: accel: bma180: Basic regulator support
iio: accel: bma180: Add dev helper variable
iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
iio: imu: st_lsm6dsx: check if pull_up is located in primary page
iio: imu: st_lsm6dsx: check if master_enable is located in primary page
iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
iio: light: remove unneeded semicolon
...
Documentation should describe how to build kunit and tests as
modules.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200107135929.3267-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.
Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
The NVIDIA Tegra186 SoC contains a memory subsystem composed of the
memory controller and the external memory controller. The memory
controller provides interfaces for the memory clients to access the
memory. Accesses can be either bounced through the SMMU for IOVA
translation or directly to the EMC.
The bulk of the programming of the external memory controller happens
through interfaces exposed by the BPMP. Describe this relationship by
adding a phandle reference to the BPMP to the EMC node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the device tree bindings for the Tegra124 EMC controller to the
DT schema format using json-schema. While at it, clean up the binding a
little bit by removing any mention of how RAM code and clock frequency
are represented in unit-addresses (which they aren't) and by adding the
EMC clock without which the EMC controller can't change the frequency at
which the external memory is clocked. While this is technically an ABI
break (the clock was not required before), this should be fine because
there isn't much that the EMC driver can do without access to the EMC
clock.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.
The panel is used by the pine64 Pinebook Pro.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org
NVIDIA Tegra SoCs use ChipIdea silicon IP for the USB controllers.
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106013416.9604-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.
Making wp-gpios a reference to the property defined by nvmem.
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Several memories have a write-protect pin, that when pulled high, it
blocks the write operation.
On some boards, this pin is connected to a GPIO and pulled high by
default, which forces the user to manually change its state before
writing.
Instead of modifying all the memory drivers to check this pin, make
the NVMEM subsystem check if the write-protect GPIO being passed
through the nvmem_config or defined in the device tree and pull it
low whenever writing to the memory.
Add a new optional property to the device tree binding document, which
allows to specify the GPIO line to which the write-protect pin is
connected.
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add devicetree binding for Thor96 Board from Einfochips. This board is
one of the 96Boards Consumer Edition platform powered by NXP i.MX8MQ SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kamstrup manufactures meters for electricity, heating, cooling
and water. Including long-life communication infrastructure
for e.g. smart grid based on Linux, more information on
https://www.kamstrup.com
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There is an increasing number of new simple panels.
Common for many of these simple panels are that they have one
mandatory power-supply and some of them have backlight and / or
an enable gpio.
The binding file to describe these panels adds overhead
that really do not add value.
The binding are known and there is nothing gained from a
dedicated binding file nor for any dedicated example.
The following patch introduces a single panel-simple.yaml
and converts two ampire bindings over to the new file.
The conversion - if applied will have following effects:
- The maintainer for the individual file will change
There is no need for many different maintainers for a simple binding.
We have the same situation with the panel-simple driver in the kernel.
- The license will change to (GPL-2.0-only OR BSD-2-Clause)
There is usually only a single line copied from the original
file, a line that is often copied from a datasheet.
This license change should be acceptable considered what little
is copied.
If the license change is not OK we can use a dedicated binding
file in these cases.
This is a follow-up on Rob's big patch converting a lot of panel bindings
to individual files:
"dt-bindings: display: Convert a bunch of panels to DT schema"
https://patchwork.ozlabs.org/patch/1197683/
The objectives with one file for the relevant simple panels are:
- Make it simpler to add bindings for simple panels
- Keep the number of bindings file lower and thus easier to find a
relevant file to copy from when adding new panels.
- Keep the binding documentation for simple panels more consistent
- Make it simpler to add support for new panels
v3:
- Whitespace fix (checkpatch)
- Indent compatible (Rob h)
- Indent comments to give compatible more visibility (Rob h)
v2:
- spelling fixes (imirkin via irc, Rob)
- updated description (Rob)
- list properires in alphabetical order
- added power-supply to example (Rob)
- updated title
- reworded changelog a little
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org
Convert DWC2 bindings to DT schema format using json-schema.
DWC2 is widely use but a couple of compatibles and properties
(vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the
patch add them.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
There is a spelling mistake in:
Documentation/bindings/leds/irled/spi-ir-led.txt.
Fix it.
Signed-off-by: Mohana Datta Yelugoti <ymdatta.work@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20200108131234.24128-3-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MP8859 from Monolithic Power Systems is a single output dc/dc converter
with voltage control over i2c.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20200106211633.2882-5-m.reichl@fivetechno.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix documentation fourcc names for the 12-bit and 14-bit packed Bayer formats.
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit 2b016c47f4.
Wrong patch was merged, revert this first before applying the right
patch.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We need to increase the pwm-cells for the optional flags parameter, in
order to implement support for polarity setting via DT.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
It documents "hisilicon,hi3796cv300-ir" compatible for Hi3796CV300 IR
device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a few minor typos throughout the document without changing the
meaning of the sentences.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
Lm0mvE8=
=NECs
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rc5' into patchwork
Linux 5.5-rc5
* tag 'v5.5-rc5': (1006 commits)
Linux 5.5-rc5
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
...
Add DT binding documentation for Sierra PHY IP used in TI's J721E
SoC.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add support for bcm7216 and bcm7211
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Define "brcm,bcm7216-sata-phy" as a new compatible string for the
Broadcom SATA3 PHY.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Further review of the dsi components for the px30 revealed that the
phy shouldn't expose the pll as clock but instead handle settings
via phy parameters.
As the phy binding is new and not used anywhere yet, just drop them
so they don't get used.
Fixes: 3817c79611 ("dt-bindings: phy: add yaml binding for rockchip,px30-dsi-dphy")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Convert the documentation of the driver to RST format and delete the old
txt and old information that no longer applies.
Also, add some new information.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
selinuxfs was originally mounted on /selinux, and various docs and
kconfig help texts referred to nodes under it. In Linux 3.0,
/sys/fs/selinux was introduced as the preferred mount point for selinuxfs.
Fix all the old references to /selinux/ to /sys/fs/selinux/.
While we are there, update the description of the selinux boot parameter
to reflect the fact that the default value is always 1 since
commit be6ec88f41 ("selinux: Remove SECURITY_SELINUX_BOOTPARAM_VALUE")
and drop discussion of runtime disable since it is deprecated.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
raid_status() wasn't emitting rebuild flags on the table line properly
because the rdev number was not yet set properly; index raid component
devices array directly to solve.
Also fix wrong argument count on emitted table line caused by 1 too
many rebuild/write_mostly argument and consider any journal_(dev|mode)
pairs.
Link: https://bugzilla.redhat.com/1782045
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Deprecate the CONFIG_SECURITY_SELINUX_DISABLE functionality. The
code was originally developed to make it easier for Linux
distributions to support architectures where adding parameters to the
kernel command line was difficult. Unfortunately, supporting runtime
disable meant we had to make some security trade-offs when it came to
the LSM hooks, as documented in the Kconfig help text:
NOTE: selecting this option will disable the '__ro_after_init'
kernel hardening feature for security hooks. Please consider
using the selinux=0 boot parameter instead of enabling this
option.
Fortunately it looks as if that the original motivation for the
runtime disable functionality is gone, and Fedora/RHEL appears to be
the only major distribution enabling this capability at build time
so we are now taking steps to remove it entirely from the kernel.
The first step is to mark the functionality as deprecated and print
an error when it is used (what this patch is doing). As Fedora/RHEL
makes progress in transitioning the distribution away from runtime
disable, we will introduce follow-up patches over several kernel
releases which will block for increasing periods of time when the
runtime disable is used. Finally we will remove the option entirely
once we believe all users have moved to the kernel cmdline approach.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The Qualcomm MSM8916 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The Libre Computer ALL-H5-CC board is an upgraded version of the
ALL-H3-CC. Changes include:
- Gigabit Ethernet via external RTL8211E Ethernet PHY
- 16 MiB SPI NOR flash memory
- PoE tap header
- Line out jack removed
Only H5 variant test samples were made available, and the vendor is not
certain whether other SoC variants would be made or not. Furthermore the
board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree
simply includes the one for the ALL-H3-CC, and adds the changes on top.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
A small collection of fixes here, one to make the newly added PTP
timestamping code more accurate, a few driver fixes and a fix for the
core DT binding to document the fact that we support eight wire buses.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4TMdwTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0M5UB/9w0mzrmuaJzctm3Jm8LiCIjJoZ0woQ
chgbhm2C/I6idENxdUhaJ1YZMI6NkmJKpJy5tQ/QH4MnbOVT/vHIEmIsRYO0vYoF
ApERJLia8da1OpiJlPTbsg3eUXVNmPMVeAkq5MgKSflaIjV6Ejc0FRWmgDYvzhu9
xkCsptAF7MYPUuHdBcjXPscSf1/w+FdDy8VYncEluyJ0NpGDU64N/XdTwRmsG8QW
BxA1jPPKi445NsC+OV8SFfNZbeEXG2iSEBPvp4tMGtd0TiIp3UNLTRzMstEFE6SD
hCzL9fQEzUgHD+B0vLmccyy0HR0phk6813jf9KeToAjAxKtf5XhQajW+
=Ad4n
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes here, one to make the newly added PTP
timestamping code more accurate, a few driver fixes and a fix for the
core DT binding to document the fact that we support eight wire buses"
* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Document Octal mode as valid SPI bus width
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
spi: Don't look at TX buffer for PTP system timestamping
spi: uniphier: Fix FIFO threshold
- Document TMU and CAN(FD) support for R-Car RZ/G2N.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXhMK1wAKCRCKwlD9ZEnx
cDxoAQCmOh9sJWSADwCzWhZC/JkXyA2M3fOxcGZraAd6PhfCFQD/TrlZaPGTtDyJ
QGg5N8hbb+5CdbdDnl4EY7C0glt6zwM=
=+MFf
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.6
- Document TMU and CAN(FD) support for R-Car RZ/G2N.
* tag 'renesas-dt-bindings-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: can: rcar_canfd: document r8a774b1 support
dt-bindings: can: rcar_can: document r8a774b1 support
dt-bindings: timer: renesas: tmu: Document r8a774b1 bindings
Link: https://lore.kernel.org/r/20200106104857.8361-6-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit bc081dd6e9 ("kbuild: generate modules.builtin") added
infrastructure to generate modules.builtin, the list of all
builtin modules.
Basically, it works like this:
- Kconfig generates include/config/tristate.conf, the list of
tristate CONFIG options with a value in a capital letter.
- scripts/Makefile.modbuiltin makes Kbuild descend into
directories to collect the information of builtin modules.
I am not a big fan of it because Kbuild ends up with traversing
the source tree twice.
I am not sure how perfectly it should work, but this approach cannot
avoid false positives; even if the relevant CONFIG option is tristate,
some Makefiles forces obj-m to obj-y.
Some examples are:
arch/powerpc/platforms/powermac/Makefile:
obj-$(CONFIG_NVRAM:m=y) += nvram.o
net/ipv6/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
net/netlabel/Makefile:
obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o
Nobody has complained about (or noticed) it, so it is probably fine to
have false positives in modules.builtin.
This commit simplifies the implementation. Let's exploit the fact
that every module has MODULE_LICENSE(). (modpost shows a warning if
MODULE_LICENSE is missing. If so, 0-day bot would already have blocked
such a module.)
I added MODULE_FILE to <linux/module.h>. When the code is being compiled
as builtin, it will be filled with the file path of the module, and
collected into modules.builtin.info. Then, scripts/link-vmlinux.sh
extracts the list of builtin modules out of it.
This new approach fixes the false-positives above, but adds another
type of false-positives; non-modular code may have MODULE_LICENSE()
by mistake. This is not a big deal, it is just the code is always
orphan. We can clean it up if we like. You can see cleanup examples by:
$ git log --grep='make.* explicitly non-modular'
To sum up, this commits deletes lots of code, but still produces almost
equivalent results. Please note it does not increase the vmlinux size at
all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo
section is discarded in the link stage.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The CLKREF clocks are all fed by the clock signal on the CXO2 pad on the
SoC. Update the definition of these clocks to allow this to be wired up
to the appropriate clock source.
Retain "xo" as the global named parent to make the change a nop in the
event that DT doesn't carry the necessary clocks definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20200106080546.3192125-2-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the I2C bindings for the X1000 Soc from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
SAM9X60 also supports i2c-sda-hold-time-ns. Fix the documentation accordingly.
Fixes: 2034e3f4c9 ("dt-bindings: i2c: at91: add new compatible")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Format the list of compatibles with one compatible per line.
Suggested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
BCM7216 has a special purpose RESCAL reset controller for its SATA and
PCIe0/1 instances. This is a simple reset controller with #reset-cells
set to 0.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
[florian: Convert to YAML binding]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Some MAC PCS blocks are unable to provide interrupts when their status
changes. As we already have support in phylink for polling status, use
this to provide a hook for MACs to enable polling mode.
The patch idea was picked up from Russell King's suggestion on the macb
phylink patch thread here [0] but the implementation was changed.
Instead of introducing a new phylink_start_poll() function, which would
make the implementation cumbersome for common PHYLINK implementations
for multiple types of devices, like DSA, just add a boolean property to
the phylink_config structure, which is just as backwards-compatible.
https://lkml.org/lkml/2019/12/16/603
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation for IMC (In-Memory Collection Counters) infrastructure
and trace-mode of IMC.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
[mpe: Convert to rst, minor rewording, make PMI example more concise]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028100816.6270-1-mpe@ellerman.id.au
This can be used to limit the current per LED strip.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This allows to set the overvoltage protection to 17V, 21V, 25V or 29V.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Recent discussion has revealed that the use of PHY_INTERFACE_MODE_10GKR
is incorrect. Add a 10GBASE-R definition, document both the -R and -KR
versions, and the fact that 10GKR was used incorrectly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation
-----BEGIN PGP SIGNATURE-----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=8HSd
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
PX30 SoCs use a single PHY shared by two display pipelines: MIPI DSI
and LVDS. In the case of the LVDS IP, document the possibility to fill
a PHY handle.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191224143900.23567-3-miquel.raynal@bootlin.com
Add device tree bindings for video clock controller for
Qualcomm Technology Inc's SC7180 SoCs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1577428714-17766-6-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The VIDEOCC clock provider have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1577428714-17766-5-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SC7180 SoCs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/1577428714-17766-3-git-send-email-tdas@codeaurora.org
[sboyd@kernel.org: Indicate sc7180 in commit subject]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The GPUCC clock provider have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1577428714-17766-2-git-send-email-tdas@codeaurora.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
