The new pci_ats_supported() function checks if a device supports ATS and
is allowed to use it.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200520152201.3309416-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In preparation for sharing some ASIDs with the CPU, use a global xarray to
store ASIDs and their context. ASID#0 is now reserved, and the ASID
space is global.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200519175502.2504091-9-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Some SMMUv3 implementation embed the Perf Monitor Group Registers (PMCG)
inside the first 64kB region of the SMMU. Since PMCG are managed by a
separate driver, this layout causes resource reservation conflicts
during boot.
To avoid this conflict, don't reserve the MMIO regions that are
implementation defined. Although devm_ioremap_resource() still works on
full pages under the hood, this way we benefit from resource conflict
checks.
Fixes: 7d839b4b9e ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20200513110255.597203-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/iommu/arm-smmu-v3.c:2989:26:
warning: variable ‘smmu’ set but not used [-Wunused-but-set-variable]
struct arm_smmu_device *smmu;
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200508014955.87630-1-chenzhou10@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code does the
group and sysfs setup.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of dev_iommu_priv_set/get() functions in the code.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-10-joro@8bytes.org
Arm SMMUv3.2 adds support for TLB range invalidate operations.
Support for range invalidate is determined by the RIL bit in the IDR3
register.
The range invalidate is in units of the leaf page size and operates on
1-32 chunks of a power of 2 multiple pages. First, we determine from the
size what power of 2 multiple we can use. Then we calculate how many
chunks (1-31) of the power of 2 size for the range on the iteration. On
each iteration, we move up in size by at least 5 bits.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Similar to commit 2af2e72b18 ("iommu/arm-smmu-v3: Defer TLB
invalidation until ->iotlb_sync()"), build up a list of ATC invalidation
commands and submit them all at once to the command queue instead of
one-by-one.
As there is only one caller of arm_smmu_atc_inv_master() left, we can
simplify it and avoid passing in struct arm_smmu_cmdq_ent.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Rather than publishing one command at a time when invalidating a context
descriptor, batch the commands for all SIDs in the domain.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
As more functions will implement command queue batching, add two helpers
to simplify building a command list.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Use WRITE_ONCE() to make sure that the SMMU doesn't read incomplete
stream table descriptors. Refer to the comment about 64-bit accesses,
and add the comment to the equivalent context descriptor code.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Enable PASID for PCI devices that support it. Initialize PASID early in
add_device() because it must be enabled before ATS.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Although we WARN in arm_smmu_add_device() if the device being added has
been added already without a subsequent call to arm_smmu_remove_device(),
we still continue half-heartedly, initialising the stream-table for any
new StreamIDs that may have magically appeared and re-establishing device
links that should still be there from last time.
Given that calling ->add_device() twice without removing the device in the
meantime is indicative of an error in the caller, just return -EBUSY after
warning.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Jean Philippe-Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Let add_device() clean up after itself. The iommu_bus_init() function
does call remove_device() on error, but other sites (e.g. of_iommu) do
not.
Don't free level-2 stream tables because we'd have to track if we
allocated each of them or if they are used by other endpoints. It's not
worth the hassle since they are managed resources.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
If, for some bizarre reason, the compiler decided to split up the write
of STE DWORD 0, we could end up making a partial structure valid.
Although this probably won't happen, follow the example of the
context-descriptor code and use WRITE_ONCE() to ensure atomicity of the
write.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
The SMMU can support up to 20 bits of SSID. Add a second level of page
tables to accommodate this. Devices that support more than 1024 SSIDs now
have a table of 1024 L1 entries (8kB), pointing to tables of 1024 context
descriptors (64kB), allocated on demand.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Second-level context descriptor tables will be allocated lazily in
arm_smmu_write_ctx_desc(). Help with handling allocation failure by
moving the CD write into arm_smmu_domain_finalise_s1().
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
[will: Add comment per discussion on list]
Signed-off-by: Will Deacon <will@kernel.org>
Now that we support substream IDs, initialize s1cdmax with the number of
SSID bits supported by a master and the SMMU.
Context descriptor tables are allocated once for the first master
attached to a domain. Therefore attaching multiple devices with
different SSID sizes is tricky, and we currently don't support it.
As a future improvement it would be nice to at least support attaching a
SSID-capable device to a domain that isn't using SSID, by reallocating
the SSID table. This would allow supporting a SSID-capable device that
is in the same IOMMU group as a bridge, for example. Varying SSID size
is less of a concern, since the PCIe specification "highly recommends"
that devices supporting PASID implement all 20 bits of it.
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
At the moment, the SMMUv3 driver implements only one stage-1 or stage-2
page directory per device. However SMMUv3 allows more than one address
space for some devices, by providing multiple stage-1 page directories. In
addition to the Stream ID (SID), that identifies a device, we can now have
Substream IDs (SSID) identifying an address space. In PCIe, SID is called
Requester ID (RID) and SSID is called Process Address-Space ID (PASID).
A complete stage-1 walk goes through the context descriptor table:
Stream tables Ctx. Desc. tables Page tables
+--------+ ,------->+-------+ ,------->+-------+
: : | : : | : :
+--------+ | +-------+ | +-------+
SID->| STE |---' SSID->| CD |---' IOVA->| PTE |--> IPA
+--------+ +-------+ +-------+
: : : : : :
+--------+ +-------+ +-------+
Rewrite arm_smmu_write_ctx_desc() to modify context descriptor table
entries. To keep things simple we only implement one level of context
descriptor tables here, but as with stream and page tables, an SSID can
be split to index multiple levels of tables.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Support for SSID will require allocating context descriptor tables. Move
the context descriptor allocation to separate functions.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
When adding SSID support to the SMMUv3 driver, we'll need to manipulate
leaf pasid tables and context descriptors. Extract the context
descriptor structure and align with the way stream tables are handled.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
For platform devices that support SubstreamID (SSID), firmware provides
the number of supported SSID bits. Restrict it to what the SMMU supports
and cache it into master->ssid_bits, which will also be used for PCI
PASID.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 518a2f1925 ("dma-mapping: zero memory returned from
dma_alloc_*"), dma_alloc_* always initializes memory to zero, so there
is no need to use dma_zalloc_* or pass the __GFP_ZERO flag anymore.
The flag was introduced by commit 04fa26c71b ("iommu/arm-smmu: Convert
DMA buffer allocations to the managed API"), since the managed API
didn't provide a dmam_zalloc_coherent() function.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 05a648cd2dd7 ("iommu/io-pgtable-arm: Rationalise TCR handling")
reworked the way in which the TCR register value is returned from the
io-pgtable code when targetting the Arm long-descriptor format, in
preparation for allowing page-tables to target TTBR1.
As it turns out, the new interface is a lot nicer to use, so do the same
conversion for the VTCR register even though there is only a single base
register for stage-2 translation.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Although it's conceptually nice for the io_pgtable_cfg to provide a
standard VMSA TCR value, the reality is that no VMSA-compliant IOMMU
looks exactly like an Arm CPU, and they all have various other TCR
controls which io-pgtable can't be expected to understand. Thus since
there is an expectation that drivers will have to add to the given TCR
value anyway, let's strip it down to just the essentials that are
directly relevant to io-pgtable's inner workings - namely the various
sizes and the walk attributes.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Add missing include of bitfield.h]
Signed-off-by: Will Deacon <will@kernel.org>
TTBR1 values have so far been redundant since no users implement any
support for split address spaces. Crucially, though, one of the main
reasons for wanting to do so is to be able to manage each half entirely
independently, e.g. context-switching one set of mappings without
disturbing the other. Thus it seems unlikely that tying two tables
together in a single io_pgtable_cfg would ever be particularly desirable
or useful.
Streamline the configs to just a single conceptual TTBR value
representing the allocated table. This paves the way for future users to
support split address spaces by simply allocating a table and dealing
with the detailed TTBRn logistics themselves.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Drop change to ttbr value]
Signed-off-by: Will Deacon <will@kernel.org>
The CONFIG option controlling this driver, ARM_SMMU_V3,
depends on ARM64, which select's OF.
So, CONFIG_OF is always defined when building this driver.
of_match_ptr(arm_smmu_of_match) is the same as arm_smmu_of_match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
This is an off-by-one mistake.
resource_size() returns res->end - res->start + 1.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
CMDQ_OP_TLBI_NH_VA requires VMID and this was missing since
commit 1c27df1c0a ("iommu/arm-smmu: Use correct address mask
for CMD_TLBI_S2_IPA"). Add it back.
Fixes: 1c27df1c0a ("iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Requiring each IOMMU driver to initialise the 'owner' field of their
'struct iommu_ops' is error-prone and easily forgotten. Follow the
example set by PCI and USB by assigning THIS_MODULE automatically when
registering the ops structure with IOMMU core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Use the new standard function instead of open-coding it.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I no longer work for Arm, so update the stale reference to my old email
address.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By removing the redundant call to 'pci_request_acs()' we can allow the
ARM SMMUv3 driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SMMU drivers built as modules to the ACPI/IORT device
probing path, by deferring the probe of the master if the SMMU driver is
known to exist but has not been loaded yet. Given that the IORT code
registers a platform device for each SMMU that it discovers, we can
easily trigger the udev based autoloading of the SMMU drivers by making
the platform device identifier part of the module alias.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # only manual smmu ko loading
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When removing the SMMUv3 driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation,
since it will likely lead to catastrophic failure for any DMA devices
mastering through the SMMU being unbound. When the driver then attempts
to "handle" the fatal faults, it's very easy to trip over dead data
structures, leading to use-after-free.
On John's machine, he reports that the machine was "unusable" due to
loss of the storage controller following a forced unbind of the SMMUv3
driver:
| # cd ./bus/platform/drivers/arm-smmu-v3
| # echo arm-smmu-v3.0.auto > unbind
| hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found!
| platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146
| [hwprod 0x00000146, hwcons 0x00000000]
Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs"
to true.
Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.com
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit c07b6426df.
Let's get the SMMUv3 driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 7723f4c5ec ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq_byname() displays an error
when the IRQ isn't found. Since the SMMUv3 driver uses that function to
query which interrupt method is available, the message is now displayed
during boot for any SMMUv3 that doesn't implement the combined
interrupt, or that implements MSIs.
[ 20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found
[ 20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found
[ 20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found
[ 20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found
Use platform_get_irq_byname_optional() to avoid displaying a spurious
error.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Between VMSAv8-64 and the various 32-bit formats, there is either one
64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers.
As such, keeping two 64-bit values in io_pgtable_cfg has always been
overkill.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.
The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
If CONFIG_PCI_ATS is not set, building fails:
drivers/iommu/arm-smmu-v3.c: In function arm_smmu_ats_supported:
drivers/iommu/arm-smmu-v3.c:2325:35: error: struct pci_dev has no member named ats_cap; did you mean msi_cap?
return !pdev->untrusted && pdev->ats_cap;
^~~~~~~
ats_cap should only used when CONFIG_PCI_ATS is defined,
so use #ifdef block to guard this.
Fixes: bfff88ec1a ("iommu/arm-smmu-v3: Rework enabling/disabling of ATS for PCI masters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit b5e86196b8.
Now that ATC invalidation is performed in the correct places and without
incurring a locking overhead for non-ATS systems, we can re-enable the
corresponding SMMU feature detection.
Signed-off-by: Will Deacon <will@kernel.org>
When ATS is not in use, we can avoid taking the 'devices_lock' for the
domain on the invalidation path by simply caching the number of ATS
masters currently attached. The fiddly part is handling a concurrent
->attach() of an ATS-enabled master to a domain that is being
invalidated, but we can handle this using an 'smp_mb()' to ensure that
our check of the count is ordered after completion of our prior TLB
invalidation.
This also makes our ->attach() and ->detach() flows symmetric wrt ATS
interactions.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When invalidating the ATC for an PCIe endpoint using ATS, we must take
care to complete invalidation of the main SMMU TLBs beforehand, otherwise
the device could immediately repopulate its ATC with stale translations.
Hooking the ATC invalidation into ->unmap() as we currently do does the
exact opposite: it ensures that the ATC is invalidated *before* the
main TLBs, which is bogus.
Move ATC invalidation into the actual (leaf) invalidation routines so
that it is always called after completing main TLB invalidation.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
