Pull powerpc fixes and cleanups from Ben Herrenschmidt:
"Here are a handful or two of powerpc fixes and simple/trivial
cleanups. A bunch of them fix ftrace with the new ABI v2 in Little
Endian, the rest is a scattering of fairly simple things"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't skip ePAPR spin-table CPUs
powerpc/module: Fix TOC symbol CRC
powerpc/powernv: Remove OPAL v1 takeover
powerpc/kmemleak: Do not scan the DART table
selftests/powerpc: Use the test harness for the TM DSCR test
powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong type
powerpc/kprobes: Fix jprobes on ABI v2 (LE)
powerpc/ftrace: Use pr_fmt() to namespace error messages
powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2)
powerpc/ftrace: Fix inverted check of create_branch()
powerpc/ftrace: Fix typo in mask of opcode
powerpc: Add ppc_global_function_entry()
powerpc/macintosh/smu.c: Fix closing brace followed by if
powerpc: Remove __arch_swab*
powerpc: Remove ancient DEBUG_SIG code
powerpc/kerenl: Enable EEH for IO accessors
This gives us standardised success/failure output and also handles
killing the test if it runs forever (2 minutes).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull more powerpc updates from Ben Herrenschmidt:
"Here are the remaining bits I was mentioning earlier. Mostly bug
fixes and new selftests from Michael (yay !). He also removed the WSP
platform and A2 core support which were dead before release, so less
clutter.
One little "feature" I snuck in is the doorbell IPI support for
non-virtualized P8 which speeds up IPIs significantly between threads
of a core"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
powerpc/book3s: Fix some ABIv2 issues in machine check code
powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest.
powerpc/book3s: Increment the mce counter during machine_check_early call.
powerpc/book3s: Add stack overflow check in machine check handler.
powerpc/book3s: Fix machine check handling for unhandled errors
powerpc/eeh: Dump PE location code
powerpc/powernv: Enable POWER8 doorbell IPIs
powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry
powerpc/powernv: Fix killed EEH event
powerpc: fix typo 'CONFIG_PMAC'
powerpc: fix typo 'CONFIG_PPC_CPU'
powerpc/powernv: Don't escalate non-existing frozen PE
powerpc/eeh: Report frozen parent PE prior to child PE
powerpc/eeh: Clear frozen state for child PE
powerpc/powernv: Reduce panic timeout from 180s to 10s
powerpc/xmon: avoid format string leaking to printk
selftests/powerpc: Add tests of PMU EBBs
selftests/powerpc: Add support for skipping tests
selftests/powerpc: Put the test in a separate process group
selftests/powerpc: Fix instruction loop for ABIv2 (LE)
...
Pull more perf updates from Ingo Molnar:
"A second round of perf updates:
- wide reaching kprobes sanitization and robustization, with the hope
of fixing all 'probe this function crashes the kernel' bugs, by
Masami Hiramatsu.
- uprobes updates from Oleg Nesterov: tmpfs support, corner case
fixes and robustization work.
- perf tooling updates and fixes from Jiri Olsa, Namhyung Ki, Arnaldo
et al:
* Add support to accumulate hist periods (Namhyung Kim)
* various fixes, refactorings and enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
perf: Differentiate exec() and non-exec() comm events
perf: Fix perf_event_comm() vs. exec() assumption
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates
perf/documentation: Add description for conditional branch filter
perf/x86: Add conditional branch filtering support
perf/tool: Add conditional branch filter 'cond' to perf record
perf: Add new conditional branch filter 'PERF_SAMPLE_BRANCH_COND'
uprobes: Teach copy_insn() to support tmpfs
uprobes: Shift ->readpage check from __copy_insn() to uprobe_register()
perf/x86: Use common PMU interrupt disabled code
perf/ARM: Use common PMU interrupt disabled code
perf: Disable sampled events if no PMU interrupt
perf: Fix use after free in perf_remove_from_context()
perf tools: Fix 'make help' message error
perf record: Fix poll return value propagation
perf tools: Move elide bool into perf_hpp_fmt struct
perf tools: Remove elide setup for SORT_MODE__MEMORY mode
perf tools: Fix "==" into "=" in ui_browser__warning assignment
perf tools: Allow overriding sysfs and proc finding with env var
perf tools: Consider header files outside perf directory in tags target
...
Pull networking updates from David Miller:
1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.
2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
Benniston.
3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
Mork.
4) BPF now has a "random" opcode, from Chema Gonzalez.
5) Add more BPF documentation and improve test framework, from Daniel
Borkmann.
6) Support TCP fastopen over ipv6, from Daniel Lee.
7) Add software TSO helper functions and use them to support software
TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia.
8) Support software TSO in fec driver too, from Nimrod Andy.
9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.
10) Handle broadcasts more gracefully over macvlan when there are large
numbers of interfaces configured, from Herbert Xu.
11) Allow more control over fwmark used for non-socket based responses,
from Lorenzo Colitti.
12) Do TCP congestion window limiting based upon measurements, from Neal
Cardwell.
13) Support busy polling in SCTP, from Neal Horman.
14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.
15) Bridge promisc mode handling improvements from Vlad Yasevich.
16) Don't use inetpeer entries to implement ID generation any more, it
performs poorly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
tcp: fixing TLP's FIN recovery
net: fec: Add software TSO support
net: fec: Add Scatter/gather support
net: fec: Increase buffer descriptor entry number
net: fec: Factorize feature setting
net: fec: Enable IP header hardware checksum
net: fec: Factorize the .xmit transmit function
bridge: fix compile error when compiling without IPv6 support
bridge: fix smatch warning / potential null pointer dereference
via-rhine: fix full-duplex with autoneg disable
bnx2x: Enlarge the dorq threshold for VFs
bnx2x: Check for UNDI in uncommon branch
bnx2x: Fix 1G-baseT link
bnx2x: Fix link for KR with swapped polarity lane
sctp: Fix sk_ack_backlog wrap-around problem
net/core: Add VF link state control policy
net/fsl: xgmac_mdio is dependent on OF_MDIO
net/fsl: Make xgmac_mdio read error message useful
net_sched: drr: warn when qdisc is not work conserving
...
Testing that perf properly closes opened dso objects
and tries to reopen in case we run out of allowed file
descriptors for dso data.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1401892622-30848-14-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding test that setup test_dso_data__fd_limit and test
dso data file descriptors are cached appropriately.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-13-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Making the test_file function to be reusable for
new tests coming in following patches.
Also changing the template name of temp files to
"/tmp/perf-test-XXXXXX" to easily identify & blame.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-12-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
In upcoming tests we will setup process limits, which
might affect other tests. Spawning child for each test
to prevent this.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1401892622-30848-11-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding do_open function that tries to close opened
dso objects in case we fail to open the dso due to
to crossing the allowed RLIMIT_NOFILE limit.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding file size check, because the lseek will succeed for
any offset behind file size and thus succeed when it was
expected to fail.
Factoring the code to check the offset against file size
earlier in the flow.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Caching dso data file descriptors to avoid expensive re-opens
especially during DWARF unwind.
We keep dsos data file descriptors open until their count reaches
the half of the current fd open limit (RLIMIT_NOFILE). In this case
we close file descriptor of the first opened dso object.
We've got overall speedup (~27% for my workload) of report:
'perf report --stdio -i perf-test.data' (3 runs)
(perf-test.data size was around 12GB)
current code:
545,640,944,228 cycles ( +- 0.53% )
785,255,798,320 instructions ( +- 0.03% )
366.340910010 seconds time elapsed ( +- 3.65% )
after change:
435,895,036,114 cycles ( +- 0.26% )
636,790,271,176 instructions ( +- 0.04% )
266.481463387 seconds time elapsed ( +- 0.13% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-7-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding global count of opened dso objects so we could
properly limit the number of opened dso data file
descriptors.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-6-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding global list of opened dso objects, so we can
track them and use the list for caching dso data file
descriptors.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding data_fd into dso object so we could handle caching
of opened dso file data descriptors coming int next patches.
Adding dso__data_close interface to keep the data_fd updated
when the descriptor is closed.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-4-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Add separated structure/namespace for data related
variables. We are going to add mode of them, so this
way they will be clearly separated.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-3-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
When configuring event perf checked a wrong condition that user
specified both of freq (-F) and period (-c) or the event has no
default value. This worked because most of events don't have default
value and only tracepoint events have default of 1 (and it's not
desirable to change it for those events).
However, Andi's downloadable event patch changes the situation so it
cannot change the value for those events. Fix it by allowing override
the default value if user gives one of the options.
$ perf record -a -e uops_retired.all -F 4000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (~14185 samples) ]
$ perf evlist -F
cpu/uops_retired.all/: sample_freq=4000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1402292617-26278-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
User visible:
. Improve 'perf probe' error messages, moving some diagnostic messages to
only appear in --verbose mode and fixing up some error reporting related
to variables and struct members. (Masami Hiramatsu)
. Reflow 'perf timechart' man page. (Stanislav Fomichev)
Developer stuff:
. Be more precise when reporting missing libraries in a static tool build.
(Arnaldo Carvalho de Melo)
. Show error messages from the multiple make invoked from 'make build-test'.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=37tZ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible:
* Improve 'perf probe' error messages, moving some diagnostic messages to
only appear in --verbose mode and fixing up some error reporting related
to variables and struct members. (Masami Hiramatsu)
* Reflow 'perf timechart' man page. (Stanislav Fomichev)
Developer stuff:
* Be more precise when reporting missing libraries in a static tool build.
(Arnaldo Carvalho de Melo)
* Show error messages from the multiple make invoked from 'make build-test'.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Power8 Performance Monitor Unit (PMU) has a new feature called Event
Based Branches (EBB). This commit adds tests of the kernel API for using
EBBs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Allows us to kill the test and any children it has spawned.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Correct the DSCR SPR becoming temporarily corrupted if a task is
context switched during a transaction.
The problem occurs while suspending the task and is caused by saving
the DSCR to thread.dscr after it has already been set to the CPU's
default value:
__switch_to() calls __switch_to_tm()
which calls tm_reclaim_task()
which calls tm_reclaim_thread()
which calls tm_reclaim()
where the DSCR is set to the CPU's default
__switch_to() calls _switch()
where thread.dscr is set to the DSCR
When the task is resumed, it's transaction will be doomed (as usual)
and the DSCR SPR will be corrupted, although the checkpointed value
will be correct. Therefore the DSCR will be immediately corrected by
the transaction aborting, unless it has been suspended. In that case
the incorrect value can be seen by the task until it resumes the
transaction.
The fix is to treat the DSCR similarly to the TAR and save it early
in __switch_to().
A program exposing the problem is added to the kernel self tests as:
tools/testing/selftests/powerpc/tm/tm-resched-dscr.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
CC: <stable@vger.kernel.org> [v3.10+]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull powerpc updates from Ben Herrenschmidt:
"Here is the bulk of the powerpc changes for this merge window. It got
a bit delayed in part because I wasn't paying attention, and in part
because I discovered I had a core PCI change without a PCI maintainer
ack in it. Bjorn eventually agreed it was ok to merge it though we'll
probably improve it later and I didn't want to rebase to add his ack.
There is going to be a bit more next week, essentially fixes that I
still want to sort through and test.
The biggest item this time is the support to build the ppc64 LE kernel
with our new v2 ABI. We previously supported v2 userspace but the
kernel itself was a tougher nut to crack. This is now sorted mostly
thanks to Anton and Rusty.
We also have a fairly big series from Cedric that add support for
64-bit LE zImage boot wrapper. This was made harder by the fact that
traditionally our zImage wrapper was always 32-bit, but our new LE
toolchains don't really support 32-bit anymore (it's somewhat there
but not really "supported") so we didn't want to rely on it. This
meant more churn that just endian fixes.
This brings some more LE bits as well, such as the ability to run in
LE mode without a hypervisor (ie. under OPAL firmware) by doing the
right OPAL call to reinitialize the CPU to take HV interrupts in the
right mode and the usual pile of endian fixes.
There's another series from Gavin adding EEH improvements (one day we
*will* have a release with less than 20 EEH patches, I promise!).
Another highlight is the support for the "Split core" functionality on
P8 by Michael. This allows a P8 core to be split into "sub cores" of
4 threads which allows the subcores to run different guests under KVM
(the HW still doesn't support a partition per thread).
And then the usual misc bits and fixes ..."
[ Further delayed by gmail deciding that BenH is a dirty spammer.
Google knows. ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
powerpc/powernv: Add missing include to LPC code
selftests/powerpc: Test the THP bug we fixed in the previous commit
powerpc/mm: Check paca psize is up to date for huge mappings
powerpc/powernv: Pass buffer size to OPAL validate flash call
powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
powerpc/powernv: Set memory_block_size_bytes to 256MB
powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
powerpc/powernv: Fix endian issues in memory error handling code
powerpc/eeh: Skip eeh sysfs when eeh is disabled
powerpc: 64bit sendfile is capped at 2GB
powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
powerpc/serial: Use saner flags when creating legacy ports
powerpc: Add cpu family documentation
powerpc/xmon: Fix up xmon format strings
powerpc/powernv: Add calls to support little endian host
powerpc: Document sysfs DSCR interface
powerpc: Fix regression of per-CPU DSCR setting
powerpc: Split __SYSFS_SPRSETUP macro
arch: powerpc/fadump: Cleaning up inconsistent NULL checks
...
Improve error messages of 'perf probe --line' mode.
Currently 'perf probe' shows the "Debuginfo analysis failed" message with
an error code when the given symbol is not found:
-----
# perf probe -L page_cgroup_init_flatmem
Debuginfo analysis failed. (-2)
Error: Failed to show lines.
-----
But -2 (-ENOENT) means that the given source line or function was not
found. With this patch, 'perf probe' shows the correct error message:
-----
# perf probe -L page_cgroup_init_flatmem
Specified source line is not found.
Error: Failed to show lines.
-----
There is also another debug error code is shown in the same function
after get_real_path(). This removes that too.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071406.6788.47850.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix an error message when failed to find given address in --vars
mode.
Without this fix, perf probe -V doesn't show the final "Error"
message if it fails to find given source line. Moreover, it
tells it fails to find "variables" instead of the source line.
-----
# perf probe -V foo@bar
Failed to find variables at foo@bar (0)
-----
The result also shows mysterious error code. Actually the error
returns 0 or -ENOENT means that it just fails to find the address
of given source line. (0 means there is no matching address,
and -ENOENT means there is an entry(DIE) but it has no instance,
e.g. an empty inlined function)
This fixes it to show what happened and the final error message
as below.
-----
# perf probe -V foo@bar
Failed to find the address of foo@bar
Error: Failed to show vars.
-----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071359.6788.84716.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show error code and description only in verbose mode if 'perf probe'
command failed.
Current 'perf probe' shows error code with final error message, and that
is meaningless for many users.
This changes error messages to show the error code and its description
only in verbose mode (-v option).
Without this patch:
-----
# perf probe -a do_execve@hoge
Probe point 'do_execve@hoge' not found.
Error: Failed to add events. (-2)
-----
With this patch, normally the message doesn't show the misterious error
number:
-----
# perf probe -a do_execve@hoge
Probe point 'do_execve@hoge' not found.
Error: Failed to add events.
-----
And in verbose mode, it also shows additional error messages as below:
-----
# perf probe -va do_execve@hoge
probe-definition(0): do_execve@hoge
symbol:do_execve file:hoge line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (6 entries long)
Using /lib/modules/3.15.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/3.15.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Probe point 'do_execve@hoge' not found.
Error: Failed to add events. Reason: No such file or directory (Code: -2)
-----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071352.6788.76943.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Improve the error message if we can not find given member in the given
structure. Currently perf probe shows a wrong error message as below.
-----
# perf probe getname_flags:65 "result->BOGUS"
result(type:filename) has no member BOGUS.
Failed to find 'result' in this function.
Error: Failed to add events. (-22)
-----
The first message is correct, but the second one is not, since we didn't
fail to find a variable but fails to find the member of given variable.
-----
# perf probe getname_flags:65 "result->BOGUS"
result(type:filename) has no member BOGUS.
Error: Failed to add events. (-22)
-----
With this patch, the error message shows only the first one. And if we
really failed to find given variable, it tells us so.
-----
# perf probe getname_flags:65 "BOGUS"
Failed to find 'BOGUS' in this function.
Error: Failed to add events. (-2)
-----
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140606071345.6788.23744.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user does:
make -C tools/perf LDFLAGS=-static
asking for a static build, and the glibc-static (or equivalent) is not
found, the message wasn't clear, stating that one of glibc-devel or
glibc-static wasn't installed, clarify it checking if -static is
present in LDFLAGS.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7e0sfobbzgeydzi9gsz8ss3m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In perf's 'mem-mode', one can get access to a whole bunch of details specific to a
particular sample instruction. A bunch of those details relate to the data
address.
One interesting thing you can do with data addresses is to convert them into a unique
cacheline they belong too. Organizing these data cachelines into similar groups and sorting
them can reveal cache contention.
This patch creates an alogorithm based on various sample details that can help group
entries together into data cachelines and allows 'perf report' to sort on it.
The algorithm relies on having proper mmap2 support in the kernel to help determine
if the memory map the data address belongs to is private to a pid or globally shared.
The alogortithm is as follows:
o group cpumodes together
o group entries with discovered maps together
o sort on major, minor, inode and inode generation numbers
o if userspace anon, then sort on pid
o sort on cachelines based on data addresses
The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'.
Sample output:
#
# Samples: 206 of event 'cpu/mem-loads/pp'
# Total weight : 2534
# Sort order : dcacheline,pid
#
# Overhead Samples Data Cacheline Command: Pid
# ........ ............ ...................................................................... ..................
#
13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0
9.27% 1 [k] 0xffff88082e8cea80 swapper: 0
3.59% 2 [k] 0xffffffff819ba180 swapper: 0
0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0
0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0
Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column
from prematurely tabbing over and mis-aligning. Not sure what the problem is.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This reverts commit 3090ffb5a2.
Re-enable the mmap2 interface as we will have a user soon.
Since things have changed since perf disabled mmap2, small tweaks
to the revert had to be done:
o commit 9d4ecc88 forced (n!=8) to become (n<7)
o a new libunwind test needed updating to use mmap2 interface
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1401461382-209586-1-git-send-email-dzickus@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
With the Sebastian's change of handling num array argument (of raw
syscall enter), the script still failed to work like this:
$ perf record -e raw_syscalls:* sleep 1
$ perf script -g python
$ perf script -s perf-script.py
...
Traceback (most recent call last):
File "perf-script.py", line 42, in raw_syscalls__sys_enter
(id, args),
TypeError: %u format: a number is required, not list
Fatal Python error: problem in Python trace event handler
Aborted (core dumped)
This is because the generated script tries to print the array arg as
unsigned integer (%u). Since the python seems to convert arguments to
strings by default, just using %s solved the problem for me.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/1401338695-18837-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The file factoring in builtin-inject.c object introduced regression
in attr event callback. The commit is:
3406912 perf inject: Handle output file via perf_data_file object
Following hunk reversed the logic:
- if (!inject->pipe_output)
+ if (&inject->output.is_pipe)
putting it back, following example now works:
$ perf record -o - kill | perf inject -b | perf report -i -
Plus removing extra '&' (kudos to Arnaldo)
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140605204117.GA1771@krava.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Now that 3.15 is released, this merges the 'next' branch into 'master',
bringing us to the normal situation where my 'master' branch is the
merge window.
* accumulated work in next: (6809 commits)
ufs: sb mutex merge + mutex_destroy
powerpc: update comments for generic idle conversion
cris: update comments for generic idle conversion
idle: remove cpu_idle() forward declarations
nbd: zero from and len fields in NBD_CMD_DISCONNECT.
mm: convert some level-less printks to pr_*
MAINTAINERS: adi-buildroot-devel is moderated
MAINTAINERS: add linux-api for review of API/ABI changes
mm/kmemleak-test.c: use pr_fmt for logging
fs/dlm/debug_fs.c: replace seq_printf by seq_puts
fs/dlm/lockspace.c: convert simple_str to kstr
fs/dlm/config.c: convert simple_str to kstr
mm: mark remap_file_pages() syscall as deprecated
mm: memcontrol: remove unnecessary memcg argument from soft limit functions
mm: memcontrol: clean up memcg zoneinfo lookup
mm/memblock.c: call kmemleak directly from memblock_(alloc|free)
mm/mempool.c: update the kmemleak stack trace for mempool allocations
lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
mm: introduce kmemleak_update_trace()
mm/kmemleak.c: use %u to print ->checksum
...
Coming in v3.16, trace events will be able to save bitmasks in raw
format in the ring buffer and output it with the __get_bitmask() macro.
In order for userspace tools to parse this, it must be able to handle
the __get_bitmask() call and be able to convert the data that's in
the ring buffer into a nice bitmask format. The output is similar to
what the kernel uses to print bitmasks, with a comma separator every
4 bytes (8 characters).
This allows for cpumasks to also be saved efficiently.
The first user is the thermal:thermal_power_limit event which has the
following output:
thermal_power_limit: cpus=0000000f freq=1900000 cdev_state=0 power=5252
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home
Suggested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Javi Merino <javi.merino@arm.com>
Link: http://lkml.kernel.org/r/20140603032224.229186537@goodmis.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The traceevent plugins allows developers to have their events print out
information that is more advanced than what can be achieved by the
trace event format files.
As these plugins are used on the userspace side of the tracing tools, it
is only logical that the tools should be able to produce different types
of output for the events. The types of events still need to be defined by
the plugins thus we need a way to pass information from the tool to the
plugin to specify what type of information to be shown.
Not only does the information need to be passed by the tool to plugin, but
the plugin also requires a way to notify the tool of what options it can
provide.
This builds the plugin option infrastructure that is taken from trace-cmd
that is used to allow plugins to produce different output based on the
options specified by the tool.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140603184154.0a4c031c@gandalf.local.home
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Add a flag to pevent that will let the callers be able to set it and
keep the system, and perhaps even normal plugins from being loaded.
This is useful when plugins might hide certain information and seeing
the raw events shows what may be going on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20140603032223.678098063@goodmis.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This adds several behavioral tests to sysctl string and number writing
to detect unexpected cases that behaved differently when the sysctl
kernel.sysctl_writes_strict != 1.
[ original ]
root@localhost:~# make test_num
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... FAIL
Writing entire sysctl in short writes ... FAIL
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... FAIL
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
make: *** [test_num] Error 1
root@localhost:~# make test_string
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... FAIL
Writing beyond end of sysctl ... FAIL
Writing sysctl with multiple long writes ... ok
make: *** [test_string] Error 1
[ with CONFIG_PROC_SYSCTL_STRICT_WRITES ]
root@localhost:~# make run_tests
== Testing sysctl behavior against /proc/sys/kernel/domainname ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
== Testing sysctl behavior against /proc/sys/vm/swappiness ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
