Nixiaoming pointed out that there is a memory leak in
kvm_vm_ioctl_create_spapr_tce() if the call to anon_inode_getfd()
fails; the memory allocated for the kvmppc_spapr_tce_table struct
is not freed, and nor are the pages allocated for the iommu
tables. In addition, we have already incremented the process's
count of locked memory pages, and this doesn't get restored on
error.
David Hildenbrand pointed out that there is a race in that the
function checks early on that there is not already an entry in the
stt->iommu_tables list with the same LIOBN, but an entry with the
same LIOBN could get added between then and when the new entry is
added to the list.
This fixes all three problems. To simplify things, we now call
anon_inode_getfd() before placing the new entry in the list. The
check for an existing entry is done while holding the kvm->lock
mutex, immediately before adding the new entry to the list.
Finally, on failure we now call kvmppc_account_memlimit to
decrement the process's count of locked memory pages.
Reported-by: Nixiaoming <nixiaoming@huawei.com>
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.
Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.
For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.
This can be triggered with the below test case, resulting in warnings
from arch backends.
#define _GNU_SOURCE
#include <linux/hw_breakpoint.h>
#include <linux/perf_event.h>
#include <sched.h>
#include <stdio.h>
#include <sys/prctl.h>
#include <sys/syscall.h>
#include <unistd.h>
static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
int group_fd, unsigned long flags)
{
return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
}
char watched_char;
struct perf_event_attr wp_attr = {
.type = PERF_TYPE_BREAKPOINT,
.bp_type = HW_BREAKPOINT_RW,
.bp_addr = (unsigned long)&watched_char,
.bp_len = 1,
.size = sizeof(wp_attr),
};
int main(int argc, char *argv[])
{
int leader, ret;
cpu_set_t cpus;
/*
* Force use of CPU0 to ensure our CPU0-bound events get scheduled.
*/
CPU_ZERO(&cpus);
CPU_SET(0, &cpus);
ret = sched_setaffinity(0, sizeof(cpus), &cpus);
if (ret) {
printf("Unable to set cpu affinity\n");
return 1;
}
/* open leader event, bound to this task, CPU0 only */
leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
if (leader < 0) {
printf("Couldn't open leader: %d\n", leader);
return 1;
}
/*
* Open a follower event that is bound to the same task, but a
* different CPU. This means that the group should never be possible to
* schedule.
*/
ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
if (ret < 0) {
printf("Couldn't open mismatched follower: %d\n", ret);
return 1;
} else {
printf("Opened leader/follower with mismastched CPUs\n");
}
/*
* Open as many independent events as we can, all bound to the same
* task, CPU0 only.
*/
do {
ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
} while (ret >= 0);
/*
* Force enable/disble all events to trigger the erronoeous
* installation of the follower event.
*/
printf("Opened all events. Toggling..\n");
for (;;) {
prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
}
return 0;
}
Fix this by validating this requirement regardless of whether we're
moving events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
39a0526fb3 ("x86/mm: Factor out LDT init from context init")
renamed init_new_context() to init_new_context_ldt() and added a new
init_new_context() which calls init_new_context_ldt(). However, the
error code of init_new_context_ldt() was ignored. Consequently, if a
memory allocation in alloc_ldt_struct() failed during a fork(), the
->context.ldt of the new task remained the same as that of the old task
(due to the memcpy() in dup_mm()). ldt_struct's are not intended to be
shared, so a use-after-free occurred after one task exited.
Fix the bug by making init_new_context() pass through the error code of
init_new_context_ldt().
This bug was found by syzkaller, which encountered the following splat:
BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710
CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x24e/0x340 mm/kasan/report.c:409
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
__mmdrop+0xe9/0x530 kernel/fork.c:889
mmdrop include/linux/sched/mm.h:42 [inline]
exec_mmap fs/exec.c:1061 [inline]
flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291
load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855
search_binary_handler+0x142/0x6b0 fs/exec.c:1652
exec_binprm fs/exec.c:1694 [inline]
do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816
do_execve+0x31/0x40 fs/exec.c:1860
call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100
ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
Allocated by task 3700:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627
kmalloc include/linux/slab.h:493 [inline]
alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67
write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277
sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 3700:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xca/0x250 mm/slab.c:3820
free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121
free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
__mmdrop+0xe9/0x530 kernel/fork.c:889
mmdrop include/linux/sched/mm.h:42 [inline]
__mmput kernel/fork.c:916 [inline]
mmput+0x541/0x6e0 kernel/fork.c:927
copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931
copy_process kernel/fork.c:1546 [inline]
_do_fork+0x1ef/0xfb0 kernel/fork.c:2025
SYSC_clone kernel/fork.c:2135 [inline]
SyS_clone+0x37/0x50 kernel/fork.c:2129
do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287
return_from_SYSCALL_64+0x0/0x7a
Here is a C reproducer:
#include <asm/ldt.h>
#include <pthread.h>
#include <signal.h>
#include <stdlib.h>
#include <sys/syscall.h>
#include <sys/wait.h>
#include <unistd.h>
static void *fork_thread(void *_arg)
{
fork();
}
int main(void)
{
struct user_desc desc = { .entry_number = 8191 };
syscall(__NR_modify_ldt, 1, &desc, sizeof(desc));
for (;;) {
if (fork() == 0) {
pthread_t t;
srand(getpid());
pthread_create(&t, NULL, fork_thread, NULL);
usleep(rand() % 10000);
syscall(__NR_exit_group, 0);
}
wait(NULL);
}
}
Note: the reproducer takes advantage of the fact that alloc_ldt_struct()
may use vmalloc() to allocate a large ->entries array, and after
commit:
5d17a73a2e ("vmalloc: back off when the current task is killed")
it is possible for userspace to fail a task's vmalloc() by
sending a fatal signal, e.g. via exit_group(). It would be more
difficult to reproduce this bug on kernels without that commit.
This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> [v4.6+]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 39a0526fb3 ("x86/mm: Factor out LDT init from context init")
Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The host pkru is restored right after vcpu exit (commit 1be0e61), so
KVM_GET_XSAVE will return the host PKRU value instead. Fix this by
using the guest PKRU explicitly in fill_xsave and load_xsave. This
part is based on a patch by Junkang Fu.
The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state,
because it could have been changed by userspace since the last time
it was saved, so skip loading it in kvm_load_guest_fpu.
Reported-by: Junkang Fu <junkang.fjk@alibaba-inc.com>
Cc: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c1f
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a
simple comparison against the host value of the register. The write of
PKRU in addition can be skipped if the guest has not enabled the feature.
Once we do this, we need not test OSPKE in the host anymore, because
guest_CR4.PKE=1 implies host_CR4.PKE=1.
The static PKU test is kept to elide the code on older CPUs.
Suggested-by: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c1f
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the host has protection keys disabled, we cannot read and write the
guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block
the PKU cpuid bit in that case.
This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1.
Fixes: 1be0e61c1f
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds,
but, depending on the master clock rate, 400 ns may not fit in the tADL
field of the SMC reg. We need to relax the check and accept the -ERANGE
return code.
Note that previous versions of the ONFI spec had a lower tADL_min (100 or
200 ns). It's not clear why this timing constraint got increased but it
seems most NANDs are fine with values lower than 400ns, so we should be
safe.
Fixes: f9ce2eddf1 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
The debugfs entries must be removed before an error is returned in the
probe function. Otherwise another try to load the module fails and when
the debugfs files are accessed without the module loaded, the kernel
still tries to call a function in that module.
Fixes: 5346c27c5f ("mtd: nandsim: Introduce debugfs infrastructure")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Core Changes:
- Release driver tracking before making the object available again (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-misc:
drm: Release driver tracking before making the object available again
drm/i915 fixes for v4.13-rc7
* tag 'drm-intel-fixes-2017-08-24' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/gvt: Fix the kernel null pointer error
drm/i915: Clear lost context-switch interrupts across reset
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
Fixed the issue that two finger scroll does not work correctly
on V8 protocol. The cause is that V8 protocol X-coordinate decode
is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition.
Mote notes:
the problem manifests itself by the commit e7348396c6 ("Input: ALPS
- fix V8+ protocol handling (73 03 28)"), where a fix for the V8+
protocol was applied. Although the culprit must have been present
beforehand, the two-finger scroll worked casually even with the
wrongly reported values by some reason. It got broken by the commit
above just because it changed x_max value, and this made libinput
correctly figuring the MT events. Since the X coord is reported as
falsely doubled, the events on the right-half side go outside the
boundary, thus they are no longer handled. This resulted as a broken
two-finger scroll.
One finger event is decoded differently, and it didn't suffer from
this problem. The problem was only about MT events. --tiwai
Fixes: e7348396c6 ("Input: ALPS - fix V8+ protocol handling (73 03 28)")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Paul Donohue <linux-kernel@PaulSD.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- One core fix accidentally applied first to for-next and then cherry
picked back because it needed to be in the -rc cycles instead
- Another core fix
- Two mlx5 fixes
-----BEGIN PGP SIGNATURE-----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=mnhL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma fixes from Doug Ledford:
"Well, I thought we were going to be done for this -rc cycle. I should
have known better than to say so though.
We have four additional items that trickled in.
One was a simple mistake on my part. I took a patch into my for-next
thinking that the issue was less severe than it was. I was then
notified that it needed to be in my -rc area instead.
The other three were just found late in testing.
Summary:
- One core fix accidentally applied first to for-next and then cherry
picked back because it needed to be in the -rc cycles instead
- Another core fix
- Two mlx5 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Always return success for RoCE modify port
IB/mlx5: Fix Raw Packet QP event handler assignment
IB/core: Avoid accessing non-allocated memory when inferring port type
RDMA/uverbs: Initialize cq_context appropriately
When processing an NFSv4 WRITE operation, argp->end should never
point past the end of the data in the final page of the page list.
Otherwise, nfsd4_decode_compound can walk into uninitialized memory.
More critical, nfsd4_decode_write is failing to increment argp->pagelen
when it increments argp->pagelist. This can cause later xdr decoders
to assume more data is available than really is, which can cause server
crashes on malformed requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
- Fix a regression in the ACPI EC driver causing a kernel to crash
during initialization on some systems due to a code ordering issue
exposed by a recent change (Lv Zheng).
- Fix a recent regression in ACPICA due to a change of the behavior
of a library function in a way that is not backwards compatible
with some existing callers of it (Rafael Wysocki).
- Fix a coding mistake in a library function related to the handling
of ACPI device properties introduced during the 4.12 cycle (Sakari
Ailus).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=b1HB
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions (in ACPICA and in the ACPI EC driver)
and one bug in code introduced during the 4.12 cycle (ACPI device
properties library routine).
Specifics:
- Fix a regression in the ACPI EC driver causing a kernel to crash
during initialization on some systems due to a code ordering issue
exposed by a recent change (Lv Zheng).
- Fix a recent regression in ACPICA due to a change of the behavior
of a library function in a way that is not backwards compatible
with some existing callers of it (Rafael Wysocki).
- Fix a coding mistake in a library function related to the handling
of ACPI device properties introduced during the 4.12 cycle (Sakari
Ailus)"
* tag 'acpi-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: device property: Fix node lookup in acpi_graph_get_child_prop_value()
ACPICA: Fix acpi_evaluate_object_typed()
ACPI: EC: Fix regression related to wrong ECDT initialization order
- fix linker script regression caused by dead code elimination support
- fix typos and outdated comments
- specify kselftest-clean as a PHONY target
- fix "make dtbs_install" when $(srctree) includes shell special
characters like '~'
- Move -fshort-wchar to the global option list because defining it
partially emits warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZnvezAAoJED2LAQed4NsGTK0P/jZY3jNT3tzgldH5ggCeA7Z2
qekRVR3z0CCm3FU+NlWLVNsiyWDRxuN93lIVML8f7wt/kuJDNxycx5G7+Yiw60yH
h41gibJJdS3GL+VzfGUk1WeZkoAiGVVbLvENJzOQRIeHblsi8Ris+pBwT3MY/WKl
XM0k+xsc/abB3dnhgws8WiUvrNhRiqsciq7IBkDPzxGa4JC53+9Yjjc1HA6gah+g
gKX2qZmsjKm9Hsueot9clTttT+iDHmJ0QetHeMGy0T6bqjlRzG+H37ZGtGv3ZP4p
wcsct8QJt+8/TSEtvkROg2apBUlrEkblvsL/G2UFew42Fz4Z3XLariHTcrDoYuHY
IiUc/tUbmx6Ft72ZvepD+qN+rxQiWKqRzTD+7sDDNPPbdgC4pwZ2Z6m7Oih8mRT5
jGlex4PN/rA5ZvTDFF8c/1GhStZrfxM7A7t6k4Snui6hOpxcpK9vHDgKrfGjk83h
xkwvrPIXnreaAvUYz18JhTU1Zuzj5vwIZgPI1bRl3fi4JmagsAwl+IJawWXMFODA
WONJnqavCYRcdffD0cGfJqA8YSmpxfiDxtP7NiOt05jagDHDGH6bbsUR5Oni/9wU
9D8wdn4XdrrYGG2kEVMDa0x4Yn8vVuPfyxy5DgcRciMcYCUfNHOIHFutRvFhwcqm
rV7ege5oIH8DdsWoE5pj
=m8Zm
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix linker script regression caused by dead code elimination support
- fix typos and outdated comments
- specify kselftest-clean as a PHONY target
- fix "make dtbs_install" when $(srctree) includes shell special
characters like '~'
- Move -fshort-wchar to the global option list because defining it
partially emits warnings
* tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: update comments of Makefile.asm-generic
kbuild: Do not use hyphen in exported variable name
Makefile: add kselftest-clean to PHONY target list
Kbuild: use -fshort-wchar globally
fixdep: trivial: typo fix and correction
kbuild: trivial cleanups on the comments
kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured
Pull btrfs fix from David Sterba:
"We have one more fixup that stems from the blk_status_t conversion
that did not quite cover everything.
The normal cases were not affected because the code is 0, but any
error and retries could mix up new and old values"
* 'for-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix blk_status_t/errno confusion
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't
exist (caused by setting maxcpus on the command line that is less
than the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is registered,
it will never start even though it was told to via the kernel command
line.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlme4DwUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcssNwf+Itap7Mtbk48wJYNqfjk1pzyiOcYV
WM88EOBFM46dttVN6cBs2uUmtdvmX/g52RtsHzG6ZbwxzLE+tIGbSO2plGoknOyD
lro5CSHT2j3bu0enqkxfznDUT0PNrELEaYBoMK0yhMsXm0v+XqHUxkIqb19Ubuo+
ORPBShZghJtAiEBFArV1nXBW1kzrIFJwjymdF2ccqUlg+XxtPS1wgnZPIOjCa8ia
YM4bX3aTUh4LiUUvS7FlJsrwjB+JFOHdXu1Vg140CvJEon1a+bW4Jx88MxoN6zrp
xmFlXm/8MLWz27GO11IkveH01mSrdP67bKIIx8v2ybPBbwsW0Msb2HfZkw==
=rUJQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various bug fixes:
- Two small memory leaks in error paths.
- A missed return error code on an error path.
- A fix to check the tracing ring buffer CPU when it doesn't exist
(caused by setting maxcpus on the command line that is less than
the actual number of CPUs, and then onlining them manually).
- A fix to have the reset of boot tracers called by lateinit_sync()
instead of just lateinit(). As some of the tracers register via
lateinit(), and if the clear happens before the tracer is
registered, it will never start even though it was told to via the
kernel command line"
* tag 'trace-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix freeing of filter in create_filter() when set_str is false
tracing: Fix kmemleak in tracing_map_array_free()
ftrace: Check for null ret_stack on profile function graph entry function
ring-buffer: Have ring_buffer_alloc_read_page() return error on offline CPU
tracing: Missing error code in tracer_alloc_buffers()
tracing: Call clear_boot_tracer() at lateinit_sync
A small number of bugfixes, again nothing serious.
- Alexander Dahl found multiple bugs in the Atmel memory interface driver
- A randconfig build fix for at91 was incomplete, the second
attempt fixes the remaining corner case
- One fix for the TI Keystone queue handler
- The Odroid XU4 HDMI port (added in 4.13) needs a small
DT fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=efYA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, again nothing serious.
- Alexander Dahl found multiple bugs in the Atmel memory interface
driver
- A randconfig build fix for at91 was incomplete, the second attempt
fixes the remaining corner case
- One fix for the TI Keystone queue handler
- The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: exynos: add needs-hpd for Odroid-XU3/4
ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
memory: atmel-ebi: Fix smc cycle xlate converter
memory: atmel-ebi: Allow t_DF timings of zero ns
memory: atmel-ebi: Fix smc timing return value evaluation
The implementation of TIOCGPTPEER has two issues.
When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong
vfsmount is passed to dentry_open. Which results in the kernel displaying
the wrong pathname for the peer.
The second is simply by caching the vfsmount and dentry of the peer it leaves
them open, in a way they were not previously Which because of the inreased
reference counts can cause unnecessary behaviour differences resulting in
regressions.
To fix these move the ioctl into tty_io.c at a generic level allowing
the ioctl to have access to the struct file on which the ioctl is
being called. This allows the path of the slave to be derived when
opening the slave through TIOCGPTPEER instead of requiring the path to
the slave be cached. Thus removing the need for caching the path.
A new function devpts_ptmx_path is factored out of devpts_acquire and
used to implement a function devpts_mntget. The new function devpts_mntget
takes a filp to perform the lookup on and fsi so that it can confirm
that the superblock that is found by devpts_ptmx_path is the proper superblock.
v2: Lots of fixes to make the code actually work
v3: Suggestions by Linus
- Removed the unnecessary initialization of filp in ptm_open_peer
- Simplified devpts_ptmx_path as gotos are no longer required
[ This is the fix for the issue that was reverted in commit
143c97cc65, but this time without breaking 'pbuilder' due to
increased reference counts - Linus ]
Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Reported-by: Christian Brauner <christian.brauner@canonical.com>
Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CM layer calls ib_modify_port() regardless of the link layer.
For the Ethernet ports, qkey violation and Port capabilities
are meaningless. Therefore, always return success for ib_modify_port
calls on the Ethernet ports.
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit 44c58487d5 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
introduced the concept of type in ah_attr:
* During ib_register_device, each port is checked for its type which
is stored in ib_device's port_immutable array.
* During uverbs' modify_qp, the type is inferred using the port number
in ib_uverbs_qp_dest struct (address vector) by accessing the
relevant port_immutable array and the type is passed on to
providers.
IB spec (version 1.3) enforces a valid port value only in Reset to
Init. During Init to RTR, the address vector must be valid but port
number is not mentioned as a field in the address vector, so its
value is not validated, which leads to accesses to a non-allocated
memory when inferring the port type.
Save the real port number in ib_qp during modify to Init (when the
comp_mask indicates that the port number is valid) and use this value
to infer the port type.
Avoid copying the address vector fields if the matching bit is not set
in the attr_mask. Address vector can't be modified before the port, so
no valid flow is affected.
Fixes: 44c58487d5 ('IB/core: Define 'ib' and 'roce' rdma_ah_attr types')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Not all devices with ACPI and this combination of sound devices will
have the required information provided via ACPI. Reintroduce the I2C
device ID to restore sound functionality on on the Chromebook 'Samus'
model.
[ More background note:
the commit a36afb0ab6 ("ASoC: rt5677: Introduce proper table...")
moved the i2c ID probed via ACPI ("RT5677CE:00") to a proper
acpi_device_id table. Although the action itself is correct per se,
the overseen issue is the reference id->driver_data at
rt5677_i2c_probe() for retrieving the corresponding chip model for
the given id. Since id=NULL is passed for ACPI matching case, we get
an Oops now.
We already have queued more fixes for 4.14 and they already address
the issue, but they are bigger changes that aren't preferable for the
late 4.13-rc stage. So, this patch just papers over the bug as a
once-off quick fix for a particular ACPI matching. -- tiwai ]
Fixes: a36afb0ab6 ("ASoC: rt5677: Introduce proper table for ACPI enumeration")
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes several instances of blk_status_t and bare errno ints being
mixed up, some of which are real bugs.
In the normal case, 0 matches BLK_STS_OK, so we don't observe any
effects of the missing conversion, but in case of errors or passes
through the repair/retry paths, the errors get mixed up.
The changes were identified using 'sparse', we don't have reports of the
buggy behaviour.
Fixes: 4e4cbee93d ("block: switch bios to blk_status_t")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we split the scsi_request out of struct request bsg fails to
provide a reply-buffer for the drivers. This was done via the pointer
for sense-data, that is not preallocated anymore.
Failing to allocate/assign it results in illegal dereferences because
LLDs use this pointer unquestioned.
An example panic on s390x, using the zFCP driver, looks like this (I had
debugging on, otherwise NULL-pointer dereferences wouldn't even panic on
s390x):
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6403
Fault in home space mode while using kernel ASCE.
AS:0000000001590007 R3:0000000000000024
Oops: 0038 ilc:2 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: <Long List>
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.12.0-bsg-regression+ #3
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
task: 0000000065cb0100 task.stack: 0000000065cb4000
Krnl PSW : 0704e00180000000 000003ff801e4156 (zfcp_fc_ct_els_job_handler+0x16/0x58 [zfcp])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 000000005fa9d0d0 000000005fa9d078 0000000000e16866
000003ff00000290 6b6b6b6b6b6b6b6b 0000000059f78f00 000000000000000f
00000000593a0958 00000000593a0958 0000000060d88800 000000005ddd4c38
0000000058b50100 07000000659cba08 000003ff801e8556 00000000659cb9a8
Krnl Code: 000003ff801e4146: e31020500004 lg %r1,80(%r2)
000003ff801e414c: 58402040 l %r4,64(%r2)
#000003ff801e4150: e35020200004 lg %r5,32(%r2)
>000003ff801e4156: 50405004 st %r4,4(%r5)
000003ff801e415a: e54c50080000 mvhi 8(%r5),0
000003ff801e4160: e33010280012 lt %r3,40(%r1)
000003ff801e4166: a718fffb lhi %r1,-5
000003ff801e416a: 1803 lr %r0,%r3
Call Trace:
([<000003ff801e8556>] zfcp_fsf_req_complete+0x726/0x768 [zfcp])
[<000003ff801ea82a>] zfcp_fsf_reqid_check+0x102/0x180 [zfcp]
[<000003ff801eb980>] zfcp_qdio_int_resp+0x230/0x278 [zfcp]
[<00000000009b91b6>] qdio_kick_handler+0x2ae/0x2c8
[<00000000009b9e3e>] __tiqdio_inbound_processing+0x406/0xc10
[<00000000001684c2>] tasklet_action+0x15a/0x1d8
[<0000000000bd28ec>] __do_softirq+0x3ec/0x848
[<00000000001675a4>] irq_exit+0x74/0xf8
[<000000000010dd6a>] do_IRQ+0xba/0xf0
[<0000000000bd19e8>] io_int_handler+0x104/0x2d4
[<00000000001033b6>] enabled_wait+0xb6/0x188
([<000000000010339e>] enabled_wait+0x9e/0x188)
[<000000000010396a>] arch_cpu_idle+0x32/0x50
[<0000000000bd0112>] default_idle_call+0x52/0x68
[<00000000001cd0fa>] do_idle+0x102/0x188
[<00000000001cd41e>] cpu_startup_entry+0x3e/0x48
[<0000000000118c64>] smp_start_secondary+0x11c/0x130
[<0000000000bd2016>] restart_int_handler+0x62/0x78
[<0000000000000000>] (null)
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<000003ff801e41d6>] zfcp_fc_ct_job_handler+0x3e/0x48 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
This patch moves bsg-lib to allocate and setup struct bsg_job ahead of
time, including the allocation of a buffer for the reply-data.
This means, struct bsg_job is not allocated separately anymore, but as part
of struct request allocation - similar to struct scsi_cmd. Reflect this in
the function names that used to handle creation/destruction of struct
bsg_job.
Reported-by: Steffen Maier <maier@linux.vnet.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Cc: <stable@vger.kernel.org> #4.11+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Performing the following task with kmemleak enabled:
# cd /sys/kernel/tracing/events/irq/irq_handler_entry/
# echo 'enable_event:kmem:kmalloc:3 if irq >' > trigger
# echo 'enable_event:kmem:kmalloc:3 if irq > 31' > trigger
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff8800b9290308 (size 32):
comm "bash", pid 1114, jiffies 4294848451 (age 141.139s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81cef5aa>] kmemleak_alloc+0x4a/0xa0
[<ffffffff81357938>] kmem_cache_alloc_trace+0x158/0x290
[<ffffffff81261c09>] create_filter_start.constprop.28+0x99/0x940
[<ffffffff812639c9>] create_filter+0xa9/0x160
[<ffffffff81263bdc>] create_event_filter+0xc/0x10
[<ffffffff812655e5>] set_trigger_filter+0xe5/0x210
[<ffffffff812660c4>] event_enable_trigger_func+0x324/0x490
[<ffffffff812652e2>] event_trigger_write+0x1a2/0x260
[<ffffffff8138cf87>] __vfs_write+0xd7/0x380
[<ffffffff8138f421>] vfs_write+0x101/0x260
[<ffffffff8139187b>] SyS_write+0xab/0x130
[<ffffffff81cfd501>] entry_SYSCALL_64_fastpath+0x1f/0xbe
[<ffffffffffffffff>] 0xffffffffffffffff
The function create_filter() is passed a 'filterp' pointer that gets
allocated, and if "set_str" is true, it is up to the caller to free it, even
on error. The problem is that the pointer is not freed by create_filter()
when set_str is false. This is a bug, and it is not up to the caller to free
the filter on error if it doesn't care about the string.
Link: http://lkml.kernel.org/r/1502705898-27571-2-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: 38b78eb85 ("tracing: Factorize filter creation")
Reported-by: Chunyu Hu <chuhu@redhat.com>
Tested-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's a small race when function graph shutsdown and the calling of the
registered function graph entry callback. The callback must not reference
the task's ret_stack without first checking that it is not NULL. Note, when
a ret_stack is allocated for a task, it stays allocated until the task exits.
The problem here, is that function_graph is shutdown, and a new task was
created, which doesn't have its ret_stack allocated. But since some of the
functions are still being traced, the callbacks can still be called.
The normal function_graph code handles this, but starting with commit
8861dd303c ("ftrace: Access ret_stack->subtime only in the function
profiler") the profiler code references the ret_stack on function entry, but
doesn't check if it is NULL first.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196611
Cc: stable@vger.kernel.org
Fixes: 8861dd303c ("ftrace: Access ret_stack->subtime only in the function profiler")
Reported-by: lilydjwg@gmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds missing memory barriers to order updates/tests of
the virtual CPPR and MFRR, thus fixing a lost IPI problem.
While at it also document all barriers in this file.
This fixes a bug causing guest IPIs to occasionally get lost. The
symptom then is hangs or stalls in the guest.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds a workaround for a bug in POWER9 DD1 chips where changing
the CPPR (Current Processor Priority Register) can cause bits in the
IPB (Interrupt Pending Buffer) to get lost. Thankfully it only
happens when manually manipulating CPPR which is quite rare. When it
does happen it can cause interrupts to be delayed or lost.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When msgsnd is used for IPIs to other cores, msgsync must be executed by
the target to order stores performed on the source before its msgsnd
(provided the source executes the appropriate sync).
Fixes: 1704a81cce ("KVM: PPC: Book3S HV: Use msgsnd for IPIs to other cores on POWER9")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When a timer base is idle, it is forwarded when a new timer is added
to ensure that granularity does not become excessive. When not idle,
the timer tick is expected to increment the base.
However there are several problems:
- If an existing timer is modified, the base is forwarded only after
the index is calculated.
- The base is not forwarded by add_timer_on.
- There is a window after a timer is restarted from a nohz idle, after
it is marked not-idle and before the timer tick on this CPU, where a
timer may be added but the ancient base does not get forwarded.
These result in excessive granularity (a 1 jiffy timeout can blow out
to 100s of jiffies), which cause the rcu lockup detector to trigger,
among other things.
Fix this by keeping track of whether the timer base has been idle
since it was last run or forwarded, and if so then forward it before
adding a new timer.
There is still a case where mod_timer optimises the case of a pending
timer mod with the same expiry time, where the timer can see excessive
granularity relative to the new, shorter interval. A comment is added,
but it's not changed because it is an important fastpath for
networking.
This has been tested and found to fix the RCU softlockup messages.
Testing was also done with tracing to measure requested versus
achieved wakeup latencies for all non-deferrable timers in an idle
system (with no lockup watchdogs running). Wakeup latency relative to
absolute latency is calculated (note this suffers from round-up skew
at low absolute times) and analysed:
max avg std
upstream 506.0 1.20 4.68
patched 2.0 1.08 0.15
The bug was noticed due to the lockup detector Kconfig changes
dropping it out of people's .configs and resulting in larger base
clk skew When the lockup detectors are enabled, no CPU can go idle for
longer than 4 seconds, which limits the granularity errors.
Sub-optimal timer behaviour is observable on a smaller scale in that
case:
max avg std
upstream 9.0 1.05 0.19
patched 2.0 1.04 0.11
Fixes: Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: David Miller <davem@davemloft.net>
Cc: dzickus@redhat.com
Cc: sfr@canb.auug.org.au
Cc: mpe@ellerman.id.au
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linuxarm@huawei.com
Cc: abdhalee@linux.vnet.ibm.com
Cc: John Stultz <john.stultz@linaro.org>
Cc: akpm@linux-foundation.org
Cc: paulmck@linux.vnet.ibm.com
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170822084348.21436-1-npiggin@gmail.com
This reverts commit c8c03f1858.
It turns out that while fixing the ptmx file descriptor to have the
correct 'struct path' to the associated slave pty is a really good
thing, it breaks some user space tools for a very annoying reason.
The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X)
are on different mounts. That was what caused us to have the wrong path
in the first place (we would mix up the vfsmount of the 'ptmx' node,
with the dentry of the pty slave node), but it also means that now while
we use the right vfsmount, having the pty master open also keeps the pts
mount busy.
And it turn sout that that makes 'pbuilder' very unhappy, as noted by
Stefan Lippers-Hollmann:
"This patch introduces a regression for me when using pbuilder
0.228.7[2] (a helper to build Debian packages in a chroot and to
create and update its chroots) when trying to umount /dev/ptmx (inside
the chroot) on Debian/ unstable (full log and pbuilder configuration
file[3] attached).
[...]
Setting up build-essential (12.3) ...
Processing triggers for libc-bin (2.24-15) ...
I: unmounting dev/ptmx filesystem
W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)"
apparently pbuilder tries to unmount the /dev/pts filesystem while still
holding at least one master node open, which is arguably not very nice,
but we don't break user space even when fixing other bugs.
So this commit has to be reverted.
I'll try to figure out a way to avoid caching the path to the slave pty
in the master pty. The only thing that actually wants that slave pty
path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the
path at that time.
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Eric W Biederman <ebiederm@xmission.com>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's some stuff still up in the air, let's not get stuck with a
subpar ABI. I'll follow up with something better for 4.14.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
discard request usually is very big and easily use all bandwidth budget
of a cgroup. discard request size doesn't really mean the size of data
written, so it doesn't make sense to account it into bandwidth budget.
Jens pointed out treating the size 0 doesn't make sense too, because
discard request does have cost. But it's not easy to find the actual
cost. This patch simply makes the size one sector.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set
'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal,
just as for the exynos4 Odroid-U3.
This is due to the level-shifter that is disabled when there is no HPD, thus
blocking the CEC signal as well. Same close-but-no-cigar board design as the
Odroid-U3.
Tested with my Odroid XU4.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix very early boot failures with KASLR enabled
- Fix fatal signal handling on userspace access from kernel
- Fix leakage of floating point register state across exec()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJZnUeIAAoJELescNyEwWM0hH8IALpwELGRIKFkHYCSnBBjyHUl
SfoWSJJ8Q9X8filHk5DakfM8wTcsbwlk6XpCwqx+hbETGDq8Zz8eKlzJvg0ARpND
/Z6H3nhp3Z1MIV0nkn10XLgbKNwl7/512lTaO+TfqiIXG7fLZh5+zWBlHMcvDuNb
RAy8AVNnYOfiqB4tRupZ8MoRerVi8PHPUpPY/FB1NeGoD0nNIl/lopKRwaD+XXiS
KDfnZd4jAs8y71iaOSidybyNFQ7T++MvZsGx4eLB86MY4IBihxBWQojvtNp7Pptp
H50IFvSYKG4LXTYphZUbWriW600PGHO4oVjeY1KaZsgAhtIsegqi1SH75ulXe70=
=ES28
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Late arm64 fixes.
They fix very early boot failures with KASLR where the early mapping
of the kernel is incorrect, so the failure mode looks like a hang with
no output. There's also a signal-handling fix when a uaccess routine
faults with a fatal signal pending, which could be used to create
unkillable user tasks using userfaultfd and finally a state leak fix
for the floating pointer registers across a call to exec().
We're still seeing some random issues crop up (inode memory corruption
and spinlock recursion) but we've not managed to reproduce things
reliably enough to debug or bisect them yet.
Summary:
- Fix very early boot failures with KASLR enabled
- Fix fatal signal handling on userspace access from kernel
- Fix leakage of floating point register state across exec()"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: Adjust the offset to avoid Image across alignment boundary
arm64: kaslr: ignore modulo offset when validating virtual displacement
arm64: mm: abort uaccess retries upon fatal signal
arm64: fpsimd: Prevent registers leaking across exec
- An important core fix to reject invalid GPIOs *before* trying
to obtain a GPIO descriptor for it.
- A driver fix for the mvebu driver IRQ handling.
-----BEGIN PGP SIGNATURE-----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=eV+r
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are the (hopefully) last GPIO fixes for v4.13:
- an important core fix to reject invalid GPIOs *before* trying to
obtain a GPIO descriptor for it.
- a driver fix for the mvebu driver IRQ handling"
* tag 'gpio-v4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: Fix cause computation in irq handler
gpio: reject invalid gpio before getting gpio_desc
Add checking for the path component length and verify it is <= the maximum
that the server advertizes via FileFsAttributeInformation.
With this patch cifs.ko will now return ENAMETOOLONG instead of ENOENT
when users to access an overlong path.
To test this, try to cd into a (non-existing) directory on a CIFS share
that has a too long name:
cd /mnt/aaaaaaaaaaaaaaa...
and it now should show a good error message from the shell:
bash: cd: /mnt/aaaaaaaaaaaaaaaa...aaaaaa: File name too long
rh bz 1153996
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default. We're doing the latter temporarily (with a
backport to stable) to give us time to fix all the issues that turned
up with this default before trying again.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aB/i
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default.
We're doing the latter temporarily (with a backport to stable) to give
us time to fix all the issues that turned up with this default before
trying again"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: call neigh_event_send() to update MAC address
Revert "scsi: default to scsi-mq"
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
scsi: aacraid: Fix out of bounds in aac_get_name_resp
scsi: csiostor: fail probe if fw does not support FCoE
scsi: megaraid_sas: fix error handle in megasas_probe_one
The df for a SMB2 share triggers a GetInfo call for
FS_FULL_SIZE_INFORMATION. The values returned are used to populate
struct statfs.
The problem is that none of the information returned by the call
contains the total blocks available on the filesystem. Instead we use
the blocks available to the user ie. quota limitation when filling out
statfs.f_blocks. The information returned does contain Actual free units
on the filesystem and is used to populate statfs.f_bfree. For users with
quota enabled, it can lead to situations where the total free space
reported is more than the total blocks on the system ending up with df
reports like the following
# df -h /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.5G -2.3G 2.5G - /mnt/a
To fix this problem, we instead populate both statfs.f_bfree with the
same value as statfs.f_bavail ie. CallerAvailableAllocationUnits. This
is similar to what is done already in the code for cifs and df now
reports the quota information for the user used to mount the share.
# df --si /mnt/a
Filesystem Size Used Avail Use% Mounted on
//192.168.22.10/a 2.7G 101M 2.6G 4% /mnt/a
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: <stable@vger.kernel.org>
My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:
warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'
This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.
Fixes: cc7a938f5f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
once error happens in shadow_indirect_ctx function, the variable
wa_ctx->indirect_ctx.obj is not initialized but accessed, so the
kernel null point panic occurs.
Fixes: 894cf7d156 ("drm/i915/gvt: i915_gem_object_create() returns an error pointer")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
commit 26549d1774 ("binder: guarantee txn complete / errors delivered
in-order") passed the locally declared and undefined cmd
to binder_stat_br() which results in a bogus cmd field in a trace
event and BR stats are incremented incorrectly.
Change to use e->cmd which has been initialized.
Signed-off-by: Todd Kjos <tkjos@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 26549d1774 ("binder: guarantee txn complete / errors delivered in-order")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
