Pull NVMe fixes from Christoph for this release.
* 'nvme-5.0' of git://git.infradead.org/nvme:
nvme-pci: fix rapid add remove sequence
nvme: lock NS list changes while handling command effects
A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.
Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.
Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().
On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.
Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A recent optimization had left private uninitialized.
Fixes: 2bc4ca9bb6 ("aio: don't zero entire aio_kiocb aio_get_req()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit b4935e3a3c ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3c ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Commit edb715dffd ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes: f3ed97f9ae ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft
reset may cause bus master lock up") for MX28 too. It has the same
problem.
Observed problem: once per 100,000+ MX28 reboots NAND read failed on
DMA timeout errors:
[ 1.770823] UBI: attaching mtd3 to ubi0
[ 2.768088] gpmi_nand: DMA timeout, last DMA :1
[ 3.958087] gpmi_nand: BCH timeout, last DMA :1
[ 4.156033] gpmi_nand: Error in ECC-based read: -110
[ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64
bytes from PEB 0:0, read only 0 bytes, retry
[ 4.171283] step 1 error
[ 4.173846] gpmi_nand: Chip: 0, Error -1
Without BCH soft reset we successfully executed 1,000,000 MX28 reboots.
I have a quote from NXP regarding this problem, from July 18th 2016:
"As the i.MX23 and i.MX28 are of the same generation, they share many
characteristics. Unfortunately, also the erratas may be shared.
In case of the documented erratas and the workarounds, you can also
apply the workaround solution of one device on the other one. This have
been reported, but I’m afraid that there are not an estimated date for
updating the Errata documents.
Please accept our apologies for any inconveniences this may cause."
Fixes: 6f2a6a5256 ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems")
Cc: stable@vger.kernel.org
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.
IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.
The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.
v2: Fix potential NULL deref (kbuild test robot)
Constify has_bogus_dpll_config()
Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7bed8adcd9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205141846.6053-1-ville.syrjala@linux.intel.com
A call of pci_iounmap() call without CONFIG_PCI leads to a build error
on some architectures. We tried to address this and add a check of
IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh.
Ideally we should fix it globally, it's really a corner case, so let's
paper over it with a simpler ifdef.
Fixes: 1e73359a24 ("ALSA: hda/ca0132 - make pci_iounmap() call conditional")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ATU port vector contains a bit per port of the switch. The code
wrongly used it as a port number, and incremented a port counter. This
resulted in the wrong interfaces counter being incremented, and
potentially going off the end of the array of ports.
Fix this by using the source port ID for the violation, which really
is a port number.
Reported-by: Chris Healy <Chris.Healy@zii.aero>
Tested-by: Chris Healy <Chris.Healy@zii.aero>
Fixes: 65f60e4582 ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Why]
eDP was missing in the checks for supported VRR connectors.
[How]
Attach the properties for eDP connectors too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 33f45c44d6 ("mtd: Do not allow MTD devices with inconsistent
erase properties") introduced a check to make sure ->erasesize and
->_erase values are consistent with the MTD_NO_ERASE flag.
This patch did not take the 0 bytes partition case into account which
can happen when the defined partition is outside the flash device memory
range. Fix that by setting the partition erasesize to the parent
erasesize.
Fixes: 33f45c44d6 ("mtd: Do not allow MTD devices with inconsistent erase properties")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
It is normal user behaviour to start, stop, then start a stream
again without closing it. Currently this works for compressed
playback streams but not capture ones.
The states on a compressed capture stream go directly from OPEN to
PREPARED, unlike a playback stream which moves to SETUP and waits
for a write of data before moving to PREPARED. Currently however,
when a stop is sent the state is set to SETUP for both types of
streams. This leaves a capture stream in the situation where a new
start can't be sent as that requires the state to be PREPARED and
a new set_params can't be sent as that requires the state to be
OPEN. The only option being to close the stream, and then reopen.
Correct this issues by allowing snd_compr_drain_notify to set the
state depending on the stream direction, as we already do in
set_params.
Fixes: 49bb6402f1 ("ALSA: compress_core: Add support for capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's no reason to expose struct vring_packed in UAPI - if we do we
won't be able to change or drop it, and it's not part of any interface.
Let's move it to virtio_ring.c
Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In packets that need to be decaped the internal headers
have to be checked, not the external ones.
Fixes: bdd66ac0ae ("net/mlx5e: Disallow TC offloading of unsupported match/action combinations")
Signed-off-by: Guy Shattah <sguy@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The match level computed by the driver gets to be wrong for decap
rules with wildcarded inner packet match such as:
tc filter add dev vxlan_sys_4789 protocol all parent ffff: prio 2 flower
enc_dst_ip 192.168.0.9 enc_key_id 100 enc_dst_port 4789
action tunnel_key unset
action mirred egress redirect dev eth1
The FW errs for a missing matching meta-data indicator for the outer
headers (where we do have a match), and a wrong matching meta-data
indicator for the inner headers (where we don't have a match).
Fix that by taking into account the matching on the tunnel info and
relating the match level of the encapsulated packet to the firmware
inner headers indicator in case of decap.
As for vxlan we mandate a match on the tunnel udp dst port, and in general
we practically madndate a match on the source or dest ip for any IP tunnel,
the fix was done in a minimal manner around the tunnel match parsing code.
Fixes: d708f90298 ('net/mlx5e: Get the required HW match level while parsing TC flow matches')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Slava Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
At Innova IPsec TX offload data path a special software parser metadata
is used to pass some packet attributes to the hardware, this metadata
is passed using the Ethernet control segment of a WQE (a HW descriptor)
header.
The cited commit might nullify this header, hence the metadata is lost,
this caused a significant performance drop during hw offloading
operation.
Fix by restoring the metadata at the Ethernet control segment in case
it was nullified.
Fixes: 37fdffb217 ("net/mlx5: WQ, fixes for fragmented WQ buffers API")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use CONFIG_NF_TABLES_INET from seltests, not NF_TABLES_INET.
From Naresh Kamboju.
2) Add a test to cover masquerading and redirect case, from Florian
Westphal.
3) Two packets coming from the same socket may race to set up NAT,
ending up with different tuples and the packet losing race being
dropped. Update nf_conntrack_tuple_taken() to exercise clash
resolution for this case. From Martynas Pumputis and Florian
Westphal.
4) Unbind anonymous sets from the commit and abort path, this fixes
a splat due to double set list removal/release in case that the
transaction needs to be aborted.
5) Do not preserve original output interface for packets that are
redirected in the output chain when ip6_route_me_harder() is
called. Otherwise packets end up going not going to the loopback
device. From Eli Cooper.
6) Fix bogus splat in nft_compat with CONFIG_REFCOUNT_FULL=y, this
also simplifies the existing logic to deal with the list insertions
of the xtables extensions. From Florian Westphal.
Diffstat look rather larger than usual because of the new selftest, but
Florian and I consider that having tests soon into the tree is good to
improve coverage. If there's a different policy in this regard, please,
let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the T+A VID to the generic check in order to enable
native DSD support for T+A devices. This works with the new T+A USB
DAC model SD3100HV and will also work with future devices which
support the XMOS/Thesycon style DSD format.
Signed-off-by: Udo Eberhardt <udo.eberhardt@thesycon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since 2.5.34 the code has had the potential to not allocate siginfo
for SIGSTOP signals. Except for ptrace this is perfectly fine as only
ptrace can use PTRACE_PEEK_SIGINFO and see what the contents of
the delivered siginfo are.
Users of PTRACE_PEEK_SIGINFO that care about the contents siginfo
for SIGSTOP are rare, but they do exist. A seccomp self test
has cared and lldb cares.
Jack Andersen <jackoalan@gmail.com> writes:
> The patch titled
> `signal: Never allocate siginfo for SIGKILL or SIGSTOP`
> created a regression for users of PTRACE_GETSIGINFO needing to
> discern signals that were raised via the tgkill syscall.
>
> A notable user of this tgkill+ptrace combination is lldb while
> debugging a multithreaded program. Without the ability to detect a
> SIGSTOP originating from tgkill, lldb does not have a way to
> synchronize on a per-thread basis and falls back to SIGSTOP-ing the
> entire process.
Everyone affected by this please note. The kernel can still fail to
allocate a siginfo structure. The allocation is with GFP_KERNEL and
is best effort only. If memory is tight when the signal allocation
comes in this will fail to allocate a siginfo.
So I strongly recommend looking at more robust solutions for
synchronizing with a single thread such as PTRACE_INTERRUPT. Or if
that does not work persuading your friendly local kernel developer to
build the interface you need.
Reported-by: Tycho Andersen <tycho@tycho.ws>
Reported-by: Kees Cook <keescook@chromium.org>
Reported-by: Jack Andersen <jackoalan@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Christian Brauner <christian@brauner.io>
Cc: stable@vger.kernel.org
Fixes: f149b31557 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
Fixes: 6dfc88977e42 ("[PATCH] shared thread signals")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Support both Python 2 and Python 3 in tests/attr.py
The use of "except as" syntax implies the minimum supported Python2 version is
now v2.6
Committer testing:
$ make -C tools/perf PYTHON3=python install-bin
Before:
# perf test attr
16: Setup struct perf_event_attr : FAILED!
48: Synthesize attr update : Ok
[root@quaco ~]# perf test -v attr
16: Setup struct perf_event_attr :
--- start ---
test child forked, pid 3121
File "/home/acme/libexec/perf-core/tests/attr.py", line 324
except Unsup, obj:
^
SyntaxError: invalid syntax
test child finished with -1
---- end ----
Setup struct perf_event_attr: FAILED!
48: Synthesize attr update :
--- start ---
test child forked, pid 3124
test child finished with 0
---- end ----
Synthesize attr update: Ok
#
After:
# perf test attr
16: Setup struct perf_event_attr : Ok
48: Synthesize attr update : Ok
#
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even if we don't have the correct clock and get a warning, we should not
skip the return.
v2: improve commit message (from Joonas)
Fixes: 1fa11ee2d9 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
(cherry picked from commit 7a61a6dec3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're incorrectly masking off the R/V channel enable bit from
KEYMSK. Fix it up.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125183846.28755-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 968bf969b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When I moved the refcount to refcount_t type I missed the fact that
refcount_inc() will result in use-after-free warning with
CONFIG_REFCOUNT_FULL=y builds.
The correct fix would be to init the reference count to 1 at allocation
time, but, unfortunately we cannot do this, as we can't undo that
in case something else fails later in the batch.
So only solution I see is to special-case the 'new entry' condition
and replace refcount_inc() with a "delayed" refcount_set(1) in this case,
as done here.
The .activate callback can be removed to simplify things, we only
need to make sure that deactivate() decrements/unlinks the entry
from the list at end of transaction phase (commit or abort).
Fixes: 12c44aba66 ("netfilter: nft_compat: use refcnt_t type for nft_xt reference count")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 508b09046c ("netfilter: ipv6: Preserve link scope traffic
original oif") made ip6_route_me_harder() keep the original oif for
link-local and multicast packets. However, it also affected packets
for the loopback address because it used rt6_need_strict().
REDIRECT rules in the OUTPUT chain rewrite the destination to loopback
address; thus its oif should not be preserved. This commit fixes the bug
that redirected local packets are being dropped. Actually the packet was
not exactly dropped; Instead it was sent out to the original oif rather
than lo. When a packet with daddr ::1 is sent to the router, it is
effectively dropped.
Fixes: 508b09046c ("netfilter: ipv6: Preserve link scope traffic original oif")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
instead of relying on intel_iommu_enabled, use the fact that the
dma_map_ops::map_page != dma_direct_map_page.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.
Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
During modeset check it is possible to have all crtc_state's in atomic
state. Check for crtc enable status while checking for display unit
active status. Only error if enabling a crtc while display unit is not
active.
Cc: <stable@vger.kernel.org>
Fixes: 9da6e26c0a: ("drm/vmwgfx: Fix a layout race condition")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
if vmw_execbuf_fence_commands() fails, The handle value will be
uninitialized and a bogus fence handle might be copied to user-space.
Cc: <stable@vger.kernel.org>
Fixes: 2724b2d54c: ("drm/vmwgfx: Use new validation interface for the modesetting code v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com> #v1
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #v1
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.
So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.
Cc: <stable@vger.kernel.org>
Fixes: ae2a104058: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
We currently get the following error with pixcir_ts driver during a
suspend resume cycle:
omap_i2c 4802a000.i2c: controller timed out
pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34 : -110
pixcir_ts 1-005c: Failed to disable interrupt generation: -110
pixcir_ts 1-005c: Failed to stop
dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
[pixcir_i2c_ts] returns -110
PM: Device 1-005c failed to resume: error -110
And at least am437x based devices with pixcir_ts will fail to resume
to a touchscreen that is configured as the wakeup-source in device
tree for these devices.
This is because pixcir_ts tries to reconfigure it's registers for
noirq suspend which fails. This also leaves i2c-omap in enabled state
for suspend.
Let's fix the pixcir_ts issue and make sure i2c-omap is suspended by
adding SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.
Let's also get rid of some ifdefs while at it and replace them with
__maybe_unused as SET_RUNTIME_PM_OPS and SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
already deal with the various PM Kconfig options.
Reported-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Calling strlen() on cmdline == NULL produces a kernel oops. Since having
a NULL cmdline is valid, handle this case explicitly.
Fixes: 52b2a8af74 ("arm64: kexec_file: load initrd and device-tree")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Presently when an error is encountered during probe of the cxlflash
adapter, a deadlock is seen with cpu thread stuck inside
cxlflash_remove(). Below is the trace of the deadlock as logged by
khungtaskd:
cxlflash 0006:00:00.0: cxlflash_probe: init_afu failed rc=-16
INFO: task kworker/80:1:890 blocked for more than 120 seconds.
Not tainted 5.0.0-rc4-capi2-kexec+ #2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/80:1 D 0 890 2 0x00000808
Workqueue: events work_for_cpu_fn
Call Trace:
0x4d72136320 (unreliable)
__switch_to+0x2cc/0x460
__schedule+0x2bc/0xac0
schedule+0x40/0xb0
cxlflash_remove+0xec/0x640 [cxlflash]
cxlflash_probe+0x370/0x8f0 [cxlflash]
local_pci_probe+0x6c/0x140
work_for_cpu_fn+0x38/0x60
process_one_work+0x260/0x530
worker_thread+0x280/0x5d0
kthread+0x1a8/0x1b0
ret_from_kernel_thread+0x5c/0x80
INFO: task systemd-udevd:5160 blocked for more than 120 seconds.
The deadlock occurs as cxlflash_remove() is called from cxlflash_probe()
without setting 'cxlflash_cfg->state' to STATE_PROBED and the probe thread
starts to wait on 'cxlflash_cfg->reset_waitq'. Since the device was never
successfully probed the 'cxlflash_cfg->state' never changes from
STATE_PROBING hence the deadlock occurs.
We fix this deadlock by setting the variable 'cxlflash_cfg->state' to
STATE_PROBED in case an error occurs during cxlflash_probe() and just
before calling cxlflash_remove().
Cc: stable@vger.kernel.org
Fixes: c21e0bbfc485("cxlflash: Base support for IBM CXL Flash Adapter")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit bbc0f8bd88.
It added a warning whose intent was to check whether the rport was still
linked into the peer list. It doesn't work as intended and gives false
positive warnings for two reasons:
1) If the rport is never linked into the peer list it will not be
considered empty since the list_head is never initialized.
2) If the rport is deleted from the peer list using list_del_rcu(), then
the list_head is in an undefined state and it is not considered empty.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit bf50545696 ("block: Introduce blk_revalidate_disk_zones()")
inadvertently broke the message output of sd_zbc_print_zones() because the
zone information initialization of the scsi disk structure was moved to the
second scan run while sd_zbc_print_zones() is called on the first
scan. This leads to the following incorrect message to be printed for any
ZBC or ZAC zoned disks.
"...[sdX] 4294967295 zones of 0 logical blocks + 1 runt zone"
Fix this by initializing sdkp zone size and number of zones early on the
first scan. This does not impact the execution of
blk_revalidate_zones(). This functions is still called only once the block
device capacity is set on the second revalidate run on boot, or if the disk
zone configuration changed (i.e. the disk changed).
Fixes: bf50545696 ("block: Introduce blk_revalidate_disk_zones()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pi_prot_format conversion to write-only caused userspace breakage. Make the
ConfigFS path readable again and hardcode the "0\n" content, matching
previous output.
Fixes: 6baca7601b ("scsi: target: drop unused pi_prot_format attribute storage")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1667505
Reported-by: Lee Duncan <lduncan@suse.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.
When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.
Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.
Fixes: 91da11f870 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Rundong Ge <rdong.ge@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch (b6c7a324df "MIPS: Fix get_frame_info() handling of
microMIPS function size.") introduces additional function size
check for microMIPS by only checking insn between ip and ip + func_size.
However, func_size in get_frame_info() is always 0 if KALLSYMS is not
enabled. This causes get_frame_info() to return immediately without
calculating correct frame_size, which in turn causes "Can't analyze
schedule() prologue" warning messages at boot time.
This patch removes func_size check, and let the frame_size check run
up to 128 insns for both MIPS and microMIPS.
Signed-off-by: Jun-Ru Chang <jrjang@realtek.com>
Signed-off-by: Tony Wu <tonywu@realtek.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6c7a324df ("MIPS: Fix get_frame_info() handling of microMIPS function size.")
Cc: <ralf@linux-mips.org>
Cc: <jhogan@kernel.org>
Cc: <macro@mips.com>
Cc: <yamada.masahiro@socionext.com>
Cc: <peterz@infradead.org>
Cc: <mingo@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
DTC introduced an i2c_bus_reg check in v1.4.7, used since Linux v4.20,
which complains about upper case addresses used in the unit name.
nexys4ddr.dts names an I2C device node "ad7420@4B", leading to:
arch/mips/boot/dts/xilfpga/nexys4ddr.dts:109.16-112.8: Warning
(i2c_bus_reg): /i2c@10A00000/ad7420@4B: I2C bus unit address format
error, expected "4b"
Fix this by switching to lower case addresses throughout the file, as is
*mostly* the case in the file already & fairly standard throughout the
tree.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: linux-mips@vger.kernel.org
On the Loongson-2G/2H/3A/3B there is a hardware flaw that ll/sc and
lld/scd is very weak ordering. We should add sync instructions "before
each ll/lld" and "at the branch-target between ll/sc" to workaround.
Otherwise, this flaw will cause deadlock occasionally (e.g. when doing
heavy load test with LTP).
Below is the explaination of CPU designer:
"For Loongson 3 family, when a memory access instruction (load, store,
or prefetch)'s executing occurs between the execution of LL and SC, the
success or failure of SC is not predictable. Although programmer would
not insert memory access instructions between LL and SC, the memory
instructions before LL in program-order, may dynamically executed
between the execution of LL/SC, so a memory fence (SYNC) is needed
before LL/LLD to avoid this situation.
Since Loongson-3A R2 (3A2000), we have improved our hardware design to
handle this case. But we later deduce a rarely circumstance that some
speculatively executed memory instructions due to branch misprediction
between LL/SC still fall into the above case, so a memory fence (SYNC)
at branch-target (if its target is not between LL/SC) is needed for
Loongson 3A1000, 3B1500, 3A2000 and 3A3000.
Our processor is continually evolving and we aim to to remove all these
workaround-SYNCs around LL/SC for new-come processor."
Here is an example:
Both cpu1 and cpu2 simutaneously run atomic_add by 1 on same atomic var,
this bug cause both 'sc' run by two cpus (in atomic_add) succeed at same
time('sc' return 1), and the variable is only *added by 1*, sometimes,
which is wrong and unacceptable(it should be added by 2).
Why disable fix-loongson3-llsc in compiler?
Because compiler fix will cause problems in kernel's __ex_table section.
This patch fix all the cases in kernel, but:
+. the fix at the end of futex_atomic_cmpxchg_inatomic is for branch-target
of 'bne', there other cases which smp_mb__before_llsc() and smp_llsc_mb() fix
the ll and branch-target coincidently such as atomic_sub_if_positive/
cmpxchg/xchg, just like this one.
+. Loongson 3 does support CONFIG_EDAC_ATOMIC_SCRUB, so no need to touch
edac.h
+. local_ops and cmpxchg_local should not be affected by this bug since
only the owner can write.
+. mips_atomic_set for syscall.c is deprecated and rarely used, just let
it go
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huang Pei <huangpei@loongson.cn>
[paul.burton@mips.com:
- Simplify the addition of -mno-fix-loongson3-llsc to cflags, and add
a comment describing why it's there.
- Make loongson_llsc_mb() a no-op when
CONFIG_CPU_LOONGSON3_WORKAROUNDS=n, rather than a compiler memory
barrier.
- Add a comment describing the bug & how loongson_llsc_mb() helps
in asm/barrier.h.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: ambrosehua@gmail.com
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Xu Chenghua <xuchenghua@loongson.cn>
With a suitably defined "probe:vfs_getname" probe, 'perf trace' can
"beautify" its output, so syscalls like open() or openat() can print the
"filename" argument instead of just its hex address, like:
$ perf trace -e open -- touch /dev/null
[...]
0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
[...]
The output without such beautifier looks like:
0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
However, when the vfs_getname probe expands to multiple probes and it is
not the first one that is hit, the beautifier fails, as following:
0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
Fix it by hooking into all the expanded probes (inlines), now, for instance:
[root@quaco ~]# perf probe -l
probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname)
probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname)
[root@quaco ~]# perf trace -e open* sleep 1
0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3
0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3
0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3
[root@quaco ~]#
Works, further verified with:
[root@quaco ~]# perf test vfs
65: Use vfs_getname probe to get syscall args filenames : Ok
66: Add vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@quaco ~]#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those aren't present in Alpine Linux 3.4 to edge, so provide fallback
defines to get the next patch building there keeping the build
bisectable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-03cg3gya2ju4ba2x6ibb9fuz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-02-04
please apply the following four fixes to -net.
Patch 1 takes care of a common resource leak in various error paths, while the
second patch fixes a misordered kfree when cleaning up after an error.
The other two patches ensure that there's no stale work dangling on workqueues
when the qeth device has already been offlined and/or removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
