This reverts commit 7f466032dc ("vhost: access vq metadata through
kernel virtual address"). The commit caused a bunch of issues, and
while commit 73f628ec9e ("vhost: disable metadata prefetch
optimization") disabled the optimization it's not nice to keep lots of
dead code around.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This seems to cause guest and host memory corruption.
Disable for now until we get a better handle on that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clang warns:
drivers/vhost/vhost.c:2085:5: warning: macro expansion producing
'defined' has undefined behavior [-Wexpansion-to-defined]
#if VHOST_ARCH_CAN_ACCEL_UACCESS
^
drivers/vhost/vhost.h:98:38: note: expanded from macro
'VHOST_ARCH_CAN_ACCEL_UACCESS'
#define VHOST_ARCH_CAN_ACCEL_UACCESS defined(CONFIG_MMU_NOTIFIER) && \
^
It's being pedantic for the sake of portability, but the fix is easy
enough.
Rework the definition of VHOST_ARCH_CAN_ACCEL_UACCESS to expand to a constant.
Fixes: 7f466032dc ("vhost: access vq metadata through kernel virtual address")
Link: https://github.com/ClangBuiltLinux/linux/issues/508
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
It was noticed that the copy_to/from_user() friends that was used to
access virtqueue metdata tends to be very expensive for dataplane
implementation like vhost since it involves lots of software checks,
speculation barriers, hardware feature toggling (e.g SMAP). The
extra cost will be more obvious when transferring small packets since
the time spent on metadata accessing become more significant.
This patch tries to eliminate those overheads by accessing them
through direct mapping of those pages. Invalidation callbacks is
implemented for co-operation with general VM management (swap, KSM,
THP or NUMA balancing). We will try to get the direct mapping of vq
metadata before each round of packet processing if it doesn't
exist. If we fail, we will simplely fallback to copy_to/from_user()
friends.
This invalidation and direct mapping access are synchronized through
spinlock and RCU. All matedata accessing through direct map is
protected by RCU, and the setup or invalidation are done under
spinlock.
This method might does not work for high mem page which requires
temporary mapping so we just fallback to normal
copy_to/from_user() and may not for arch that has virtual tagged cache
since extra cache flushing is needed to eliminate the alias. This will
result complex logic and bad performance. For those archs, this patch
simply go for copy_to/from_user() friends. This is done by ruling out
kernel mapping codes through ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE.
Note that this is only done when device IOTLB is not enabled. We
could use similar method to optimize IOTLB in the future.
Tests shows at most about 23% improvement on TX PPS when using
virtio-user + vhost_net + xdp1 + TAP on 2.6GHz Broadwell:
SMAP on | SMAP off
Before: 5.2Mpps | 7.1Mpps
After: 6.4Mpps | 8.2Mpps
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the function to be more accurate since it actually tries to
prefetch vq metadata address in IOTLB. And this will be used by
following patch to prefetch metadata virtual addresses.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to have vhost_exceeds_weight() for vhost-net to:
- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX
This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After batched used ring updating was introduced in commit e2b3b35eb9
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.
headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
vhost_len, &in, vq_log, &log,
likely(mergeable) ? UIO_MAXIOV : 1);
UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads:
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
=============================================================================
BUG kmalloc-8k (Tainted: G B ): Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc
INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674
kmem_cache_alloc_trace+0xbb/0x140
alloc_pd+0x22/0x60
gen8_ppgtt_create+0x11d/0x5f0
i915_ppgtt_create+0x16/0x80
i915_gem_create_context+0x248/0x390
i915_gem_context_create_ioctl+0x4b/0xe0
drm_ioctl_kernel+0xa5/0xf0
drm_ioctl+0x2ed/0x3a0
do_vfs_ioctl+0x9f/0x620
ksys_ioctl+0x6b/0x80
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201
INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b
Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.
This fixes CVE-2018-16880.
Fixes: e2b3b35eb9 ("vhost_net: batch used ring update in rx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vhost dirty page logging API is designed to sync through GPA. But we
try to log GIOVA when device IOTLB is enabled. This is wrong and may
lead to missing data after migration.
To solve this issue, when logging with device IOTLB enabled, we will:
1) reuse the device IOTLB translation result of GIOVA->HVA mapping to
get HVA, for writable descriptor, get HVA through iovec. For used
ring update, translate its GIOVA to HVA
2) traverse the GPA->HVA mapping to get the possible GPA and log
through GPA. Pay attention this reverse mapping is not guaranteed
to be unique, so we should log each possible GPA in this case.
This fix the failure of scp to guest during migration. In -next, we
will probably support passing GIOVA->GPA instead of GIOVA->HVA.
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use to have message like:
struct vhost_msg {
int type;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
Unfortunately, there will be a hole of 32bit in 64bit machine because
of the alignment. This leads a different formats between 32bit API and
64bit API. What's more it will break 32bit program running on 64bit
machine.
So fixing this by introducing a new message type with an explicit
32bit reserved field after type like:
struct vhost_msg_v2 {
__u32 type;
__u32 reserved;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
We will have a consistent ABI after switching to use this. To enable
this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for
userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2).
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently vhost *_access_ok() functions return int. This is error-prone
because there are two popular conventions:
1. 0 means failure, 1 means success
2. -errno means failure, 0 means success
Although vhost mostly uses #1, it does not do so consistently.
umem_access_ok() uses #2.
This patch changes the return type from int to bool so that false means
failure and true means success. This eliminates a potential source of
errors.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang is particularly anal about signed vs unsigned comparisons and
doesn't like the fact that some ioctl numbers set the MSB, so we get
this error when trying to build vhost on aarch64:
drivers/vhost/vhost.c:1400:7: error: overflow converting case value to
switch condition type (3221794578 to 18446744072636378898)
[-Werror, -Wswitch]
case VHOST_GET_VRING_BASE:
3221794578 is 0xC008AF12 in hex
18446744072636378898 is 0xFFFFFFFFC008AF12 in hex
Fix this by using unsigned ints in the function signature for
vhost_vring_ioctl().
Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes the disk/cache memory stats for for the virtio balloon,
as well as multiple fixes and cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaempgAAoJECgfDbjSjVRpGOIIAIWiarIFrjjcE+hxcFdKkKvC
T8YQzfvxHTuBqD8m1jd/9R/U0RHYRM4MX+cg6tVz9J2VVhQ2Hjfrs7HExqoZKul8
sOOzk0d+ii0iQvlgnmmXamlceizP4IuNZcia7FDAZK0hWfHE84dPrG3/hhWOGruN
NDR1v7k8GBIMS+7lExQwzmy6gs4zGJftJUF9Fnb4CVT26wWbOKYS2exC8UJerZAE
2puWx71Fd/C27x/iOsxZOME0tOmzU7MIRksSjDcT7YQLesIuJSbjpQd5yfvXW0qC
7iEQzueZuYP4VroHvpDbKDxvFsIxhjFGKR4/sSG+a0Zso1ejS9fyuDL9a627PJI=
=/qQR
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
"virtio, vhost: fixes, cleanups, features
This includes the disk/cache memory stats for for the virtio balloon,
as well as multiple fixes and cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: don't hold onto file pointer for VHOST_SET_LOG_FD
vhost: don't hold onto file pointer for VHOST_SET_VRING_ERR
vhost: don't hold onto file pointer for VHOST_SET_VRING_CALL
ringtest: ring.c malloc & memset to calloc
virtio_vop: don't kfree device on register failure
virtio_pci: don't kfree device on register failure
virtio: split device_register into device_initialize and device_add
vhost: remove unused lock check flag in vhost_dev_cleanup()
vhost: Remove the unused variable.
virtio_blk: print capacity at probe time
virtio: make VIRTIO a menuconfig to ease disabling it all
virtio/ringtest: virtio_ring: fix up need_event math
virtio/ringtest: fix up need_event math
virtio: virtio_mmio: make of_device_ids const.
firmware: Use PTR_ERR_OR_ZERO()
virtio-mmio: Use PTR_ERR_OR_ZERO()
vhost/scsi: Improve a size determination in four functions
virtio_balloon: include disk/file caches memory statistics
We already hold a reference to the eventfd_ctx, which is sufficient;
there's no need to hold a reference to the struct file as well. So get
rid of vhost_dev->log_file.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
We already hold a reference to the eventfd_ctx, which is sufficient;
there's no need to hold a reference to the struct file as well. So get
rid of vhost_virtqueue->error.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
We already hold a reference to the eventfd_ctx, which is sufficient;
there's no need to hold a reference to the struct file as well. So get
rid of vhost_virtqueue->call.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
In commit ea5d404655 ("vhost: fix release path lockdep checks"),
Michael added a flag to check whether we should hold a lock in
vhost_dev_cleanup(), however, in commit 47283bef7e ("vhost: move
memory pointer to VQs"), RCU operations have been replaced by
mutex, we can remove the no-longer-used `locked' parameter now.
Signed-off-by: Caspar Zhang <jinli.zjl@alibaba-inc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The patch (7235acdb1) changed the way of the work
flushing in which the queued seq, done seq, and the
flushing are not used anymore. Then remove them now.
Fixes: 7235acdb1 ("vhost: simplify work flushing")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow interval trees to quickly check for overlaps to avoid unnecesary
tree lookups in interval_tree_iter_first().
As of this patch, all interval tree flavors will require using a
'rb_root_cached' such that we can have the leftmost node easily
available. While most users will make use of this feature, those with
special functions (in addition to the generic insert, delete, search
calls) will avoid using the cached option as they can do funky things
with insertions -- for example, vma_interval_tree_insert_after().
[jglisse@redhat.com: fix deadlock from typo vm_lock_anon_vma()]
Link: http://lkml.kernel.org/r/20170808225719.20723-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20170719014603.19029-12-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 809ecb9bca. Since it
was reported to break vhost_net. We want to cache used event and use
it to check for notification. The assumption was that guest won't move
the event idx back, but this could happen in fact when 16 bit index
wraps around after 64K entries.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When device IOTLB is enabled, all address translations were stored in
interval tree. O(lgN) searching time could be slow for virtqueue
metadata (avail, used and descriptors) since they were accessed much
often than other addresses. So this patch introduces an O(1) array
which points to the interval tree nodes that store the translations of
vq metadata. Those array were update during vq IOTLB prefetching and
were reset during each invalidation and tlb update. Each time we want
to access vq metadata, this small array were queried before interval
tree. This would be sufficient for static mappings but not dynamic
mappings, we could do optimizations on top.
Test were done with l2fwd in guest (2M hugepage):
noiommu | before | after
tx 1.32Mpps | 1.06Mpps(82%) | 1.30Mpps(98%)
rx 2.33Mpps | 1.46Mpps(63%) | 2.29Mpps(98%)
We can almost reach the same performance as noiommu mode.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When event index was enabled, we need to fetch used event from
userspace memory each time. This userspace fetch (with memory
barrier) could be saved sometime when 1) caching used event and 2)
if used event is ahead of new and old to new updating does not cross
it, we're sure there's no need to notify guest.
This will be useful for heavy tx load e.g guest pktgen test with Linux
driver shows ~3.5% improvement.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to implement an device IOTLB for vhost. This could be
used with userspace(qemu) implementation of DMA remapping
to emulate an IOMMU for the guest.
The idea is simple, cache the translation in a software device IOTLB
(which is implemented as an interval tree) in vhost and use vhost_net
file descriptor for reporting IOTLB miss and IOTLB
update/invalidation. When vhost meets an IOTLB miss, the fault
address, size and access can be read from the file. After userspace
finishes the translation, it writes the translated address to the
vhost_net file to update the device IOTLB.
When device IOTLB is enabled by setting VIRTIO_F_IOMMU_PLATFORM all vq
addresses set by ioctl are treated as iova instead of virtual address and
the accessing can only be done through IOTLB instead of direct userspace
memory access. Before each round or vq processing, all vq metadata is
prefetched in device IOTLB to make sure no translation fault happens
during vq processing.
In most cases, virtqueues are contiguous even in virtual address space.
The IOTLB translation for virtqueue itself may make it a little
slower. We might add fast path cache on top of this patch.
Signed-off-by: Jason Wang <jasowang@redhat.com>
[mst: use virtio feature bit: VHOST_F_DEVICE_IOTLB -> VIRTIO_F_IOMMU_PLATFORM ]
[mst: fix build warnings ]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[ weiyj.lk: missing unlock on error ]
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Current pre-sorted memory region array has some limitations for future
device IOTLB conversion:
1) need extra work for adding and removing a single region, and it's
expected to be slow because of sorting or memory re-allocation.
2) need extra work of removing a large range which may intersect
several regions with different size.
3) need trick for a replacement policy like LRU
To overcome the above shortcomings, this patch convert it to interval
tree which can easily address the above issue with almost no extra
work.
The patch could be used for:
- Extend the current API and only let the userspace to send diffs of
memory table.
- Simplify Device IOTLB implementation.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use spinlock to synchronize the work list now which may cause
unnecessary contentions. So this patch switch to use llist to remove
this contention. Pktgen tests shows about 5% improvement:
Before:
~1300000 pps
After:
~1370000 pps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch tries to poll for new added tx buffer or socket receive
queue for a while at the end of tx/rx processing. The maximum time
spent on polling were specified through a new kind of vring ioctl.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a helper which will return true if we're sure
that the available ring is empty for a specific vq. When we're not
sure, e.g vq access failure, return false instead. This could be used
for busy polling code to exit the busy loop.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This path introduces a helper which can give a hint for whether or not
there's a work queued in the work list. This could be used for busy
polling code to exit the busy loop.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Looking at how callers use this, maybe we should just rename init_used
to vhost_vq_init_access. The _used suffix was a hint that we
access the vq used ring. But maybe what callers care about is
that it must be called after access_ok.
Also, this function manipulates the vq->is_le field which isn't related
to the vq used ring.
This patch simply renames vhost_init_used() to vhost_vq_init_access() as
suggested by Michael.
No behaviour change.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 2751c9882b ("vhost: cross-endian
support for legacy devices") introduced a minor regression: even with
cross-endian disabled, and even on LE host, vhost_is_little_endian is
checking is_le flag so there's always a branch.
To fix, simply check virtio_legacy_is_little_endian first.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch brings cross-endian support to vhost when used to implement
legacy virtio devices. Since it is a relatively rare situation, the
feature availability is controlled by a kernel config option (not set
by default).
The vq->is_le boolean field is added to cache the endianness to be
used for ring accesses. It defaults to native endian, as expected
by legacy virtio devices. When the ring gets active, we force little
endian if the device is modern. When the ring is deactivated, we
revert to the native endian default.
If cross-endian was compiled in, a vq->user_be boolean field is added
so that userspace may request a specific endianness. This field is
used to override the default when activating the ring of a legacy
device. It has no effect on modern devices.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
The current memory accessors logic is:
- little endian if little_endian
- native endian (i.e. no byteswap) if !little_endian
If we want to fully support cross-endian vhost, we also need to be
able to convert to big endian.
Instead of changing the little_endian argument to some 3-value enum, this
patch changes the logic to:
- little endian if little_endian
- big endian if !little_endian
The native endian case is handled by all users with a trivial helper. This
patch doesn't change any functionality, nor it does add overhead.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Add guest memory access wrappers to handle virtio endianness
conversions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to use bit 32 for virtio 1.0.
Make vhost_has_feature bool to avoid discarding high bits.
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
commit 2ae76693b8bcabf370b981cd00c36cd41d33fabc
vhost: replace rcu with mutex
replaced rcu sync for memory accesses with VQ mutex locl/unlock.
This is correct since all accesses are under VQ mutex, but incomplete:
we still do useless rcu lock/unlock operations, someone might copy this
code into some other context where this won't be right.
This use of RCU is also non standard and hard to understand.
Let's copy the pointer to each VQ structure, this way
the access rules become straight-forward, and there's
no need for RCU anymore.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refactor code to make sure features are only accessed
under VQ mutex. This makes everything simpler, no need
for RCU here anymore.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since vhost_dev_init() forever return 0, some branches are never run,
therefore need to be removed.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, vq->private_data is always accessed under vq mutex. No need to play
the vhost rcu trick.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, vhost-net and vhost-scsi are sharing the vhost core code.
However, vhost-scsi shares the code by including the vhost.c file
directly.
Making vhost a separate module makes it is easier to share code with
other vhost devices.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If device has an owner, we shouldn't touch ubuf_info
since it might be in use.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is supposed to be removed when hdr is moved into vhost_net_virtqueue.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost.h should not depend on device specific marcos like
VHOST_NET_F_VIRTIO_NET_HDR and VIRTIO_NET_F_MRG_RXBUF.
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
