This patch adds support for retrieving intermediate IV from the crypto
engine when using the CBC block mode with AES and (3)DES. The retrieved
IV is copied to the request IV buffer, as requested by the kernel crypto
API.
This fix boot tests added by
commit 8efd972ef9 ("crypto: testmgr - support checking skcipher output IV").
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the queued len computation, which could theoretically
be wrong if req->len[1] - req->processed[1] > 1. Be future-proof here,
and fix it.
Fixes: b460edb623 ("crypto: inside-secure - sha512 support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A request is zeroed in safexcel_ahash_exit_inv(). This request total
size is EIP197_AHASH_REQ_SIZE while the memset zeroing it uses
sizeof(struct ahash_request), which happens to be less than
EIP197_AHASH_REQ_SIZE. This patch fixes it.
Fixes: f6beaea304 ("crypto: inside-secure - authenc(hmac(sha256), cbc(aes)) support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch unify the way the cache related data is zeroed when the cache
buffer is DMA unmapped. It should not change the driver behaviour, but
improves the code safety and readability.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The context given to the crypto engine can be reused over time. While
the driver was designed to allow this, the feature wasn't enabled in the
hardware engine. This patch enables it.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes the error reported by the Inside Secure SafeXcel
driver when a result descriptor reports an error, from -EIO to -EINVAL,
as this is what the crypto framework expects. This was found while
running the crypto extra tests.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The result descriptors contain errors, which are represented as a
bitmap. This patch updates the error message to not treat the error as a
decimal value, but as an hexadecimal one. This helps in knowing the
value does not have a direct meaning (the set bits themselves have).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When sending an ahash request, the code checks for the extra variable
not to be 0. This check is useless as the extra variable can't be 0 at
this point (it is checked on the line just before).
This patch does not modify the driver behaviour in any way.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This cosmetic patch fixes a cosmetic issue with if brackets.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This cosmetic patch moves a comment before the condition it is related
to. The patch does not change the driver behaviour in any way.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic patch removing an empty line in the skcipher token creation
routine.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundations version 2 only this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability of
fitness for a particupar purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.600052164@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 only this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 15 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141902.274594435@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 107 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
license terms gnu general public license gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 161 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.447718015@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 24 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.162703968@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the gpl 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 135 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
the code contained herein is licensed under the gnu general public
license you may obtain a copy of the gnu general public license
version 2 or later at the following locations http www opensource
org licenses gpl license html http www gnu org copyleft gpl html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 161 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Linaro/96boards Secure96 mezzanine contains (among other things)
an Atmel SHA204A symmetric crypto processor. This chip implements a
number of different functionalities, but one that is highly useful
for many different 96boards platforms is the random number generator.
So let's implement a driver for the SHA204A, and for the time being,
implement support for the random number generator only.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of adding support for the random number generator in
Atmel atsha204a devices, refactor the existing atmel-ecc driver (which
drives hardware that is closely related) so we can share the basic
I2C and command queuing routines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Atmel/Microchip EC508A is a I2C device that could be wired into
any platform, and is being used on the Linaro/96boards Secure96
mezzanine adapter. This means it could be found on any platform, even
on ones that use ACPI enumeration (via PRP0001 devices). So update the
code to enable this use case.
This involves tweaking the bus rate discovery code to take ACPI probing
into account, which records the maximum bus rate as a property of the
slave device. For the atmel-ecc code, this means that the effective bus
rate should never exceed the maximum rate, unless we are dealing with
buggy firmware. Nonetheless, let's just use the existing plumbing to
discover the bus rate and keep the existing logic intact.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam_dump_sg() is only compiled in when DEBUG is defined, hence the
messages are debug messages. Remove the @level argument from
caam_dump_sg() and print all messages at debug level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver used to put its debug messages inside #ifdef DEBUG and
then prints the messages at KERN_ERR level. Replace this with proper
functions printing at KERN_DEBUG level. The #ifdef DEBUG gets
unnecessary when the right functions are used.
This replaces:
- print_hex_dump(KERN_ERR ...) inside #ifdef DEBUG with
print_hex_dump_debug(...)
- dev_err() inside #ifdef DEBUG with dev_dbg()
- printk(KERN_ERR ...) inside #ifdef DEBUG with dev_dbg()
Some parts of the driver use these functions already, so it is only
consequent to use the debug function consistently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver defines its own debug() macro, but it is unused. Remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since eaed71a44a ("crypto: caam - add ecb(*) support") the IV can be
NULL, so only dump it when it's non NULL as designated by the ivsize
variable.
Fixes: eaed71a44a ("crypto: caam - add ecb(*) support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes multiple uses of u32s to dma_addr_t where the
physical address is used. This fixes COMPILE_TEST errors on 64-bit
platforms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch drops the license text and replaces it
with an SPDX-License-Identifier tag.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch rewrites has_ftr_sec1() using IS_ENABLED()
instead of #ifdefs
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no other file using talitos_submit in the kernel tree,
so it doesn't need to be exported nor made global.
This reverts commit 865d506155.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 865d506155 ("crypto: talitos - export the talitos_submit function")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This driver is working well in 'simple cases', but as soon as
more exotic SG lists are provided (dst different from src,
auth part not in a single SG fragment, ...) there are
wrong results, overruns, etc ...
This patch cleans up the AEAD processing by:
- Simplifying the location of 'out of line' ICV
- Never using 'out of line' ICV on encryp
- Always using 'out of line' ICV on decrypt
- Forcing the generation of a SG table on decrypt
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: aeb4c132f3 ("crypto: talitos - Convert to new AEAD interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The MPC885 reference manual states:
SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but
reads can occur on any byte boundary. Writing back a header read from a
non-32-bit-word boundary will yield unpredictable results.
In order to ensure that, cra_alignmask is set to 3 for SEC1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver assumes that the ICV is as a single piece in the last
element of the scatterlist. This assumption is wrong.
This patch ensures that the ICV is properly handled regardless of
the scatterlist layout.
Fixes: 9c4a79653b ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In that mode, hardware ICV verification is not supported.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For decrypt, req->cryptlen includes the size of the authentication
part while all functions of the driver expect cryptlen to be
the size of the encrypted data.
As it is not expected to change req->cryptlen, this patch
implements local calculation of cryptlen.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When data size is not a multiple of the alg's block size,
the SEC generates an error interrupt and dumps the registers.
And for NULL size, the SEC does just nothing and the interrupt
is awaited forever.
This patch ensures the data size is correct before submitting
the request to the SEC engine.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CTR has a blocksize of 1.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 5e75ae1b3c ("crypto: talitos - add new crypto modes")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Although the HW accepts any size and silently truncates
it to the correct length, the extra tests expects EINVAL
to be returned when the key size is not valid.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 4de9d0b547 ("crypto: talitos - Add ablkcipher algorithms")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 doesn't support SHA384/512, so it doesn't require
longer keys.
This patch reduces the max key size when the driver
is built for SEC1 only.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 03d2c5114c ("crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The talitos driver has two ways to perform AEAD depending on the
HW capability. Some HW support both. It is needed to give them
different names to distingish which one it is for instance when
a test fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 7405c8d7ff ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kcrypto_wq is only used by cryptd, so move it into cryptd.c and change
the workqueue name from "crypto" to "cryptd".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the VMX implementations of AES-CBC, AES-CTR, and AES-XTS from
the deprecated "blkcipher" API to the "skcipher" API.
As part of this, I moved the skcipher_request for the fallback algorithm
off the stack and into the request context of the parent algorithm.
I tested this in a PowerPC VM with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the boilerplate license text and replace it with the equivalent
SPDX license identifier.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware automatically zero pads incomplete block ciphers
blocks without raising any errors. This is a screw-up. This
was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that
sent a incomplete blocks and expect them to fail.
This fixes:
cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=2409 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066,
0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767]
iv_offset=6"
ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=1011 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[100.0%@alignmask+20]
dst_divs=[3.12%@+3001, 96.88%@+4070]"
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the hardware consider them to be blockciphers, the
reference implementation defines them as streamciphers.
Do the right thing and set the blocksize to 1. This
was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS.
This fixes the following issues:
skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1)
skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1)
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a issue with crypto4xx's ctr(aes) that was
discovered by libcapi's kcapi-enc-test.sh test.
The some of the ctr(aes) encryptions test were failing on the
non-power-of-two test:
kcapi-enc - Error: encryption failed with error 0
kcapi-enc - Error: decryption failed with error 0
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits):
original file (1d100e..cc96184c) and generated file (e3b0c442..1b7852b855)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated CT): original file (e3b0..5) and generated file (3..8e)
[PASSED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (128 bits)
(openssl generated PT)
[FAILED: 32-bit - 5.1.0-rc1+] 15 bytes: STDIN / STDOUT enc test (password):
original file (1d1..84c) and generated file (e3b..852b855)
But the 16, 32, 512, 65536 tests always worked.
Thankfully, this isn't a hidden hardware problem like previously,
instead this turned out to be a copy and paste issue.
With this patch, all the tests are passing with and
kcapi-enc-test.sh gives crypto4xx's a clean bill of health:
"Number of failures: 0" :).
Cc: stable@vger.kernel.org
Fixes: 98e87e3d93 ("crypto: crypto4xx - add aes-ctr support")
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For encryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV still contained the input IV while printing instead
of the output IV as intended.
For decryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV dump was correct.
Do the hex dumps consistenly after the buffers have been unmapped and
in case of IV copied to their final destination.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Selftests report the following:
[ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.043185] 00000000: fe dc ba 98 76 54 32 10
[ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.
This patch fixes that.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto self-tests reveal an error:
alg: skcipher: cbc-des3-ccp encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
The offset value should not be recomputed when retrieving the context.
Also, a code path exists which makes decisions based on older (version 3)
hardware; a v3 device deosn't support 3DES so remove this check.
Fixes: 990672d485 ('crypto: ccp - Enable 3DES function on v5 CCPs')
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updated testmgr will exhibit this error message when loading the
ccp-crypto module:
alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place"
Update the CCP crypto driver to correctly treat CFB as a streaming mode
cipher (instead of block mode). Update the configuration for CFB to
specify the block size as a single byte;
Fixes: 2b789435d7 ('crypto: ccp - CCP AES crypto API support')
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CFB mode should be treated as a stream cipher, not block.
Fixes: 63b945091a ('crypto: ccp - CCP device driver and interface support')
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently there is a mismatch b/w the ICID (Isolation Context ID) used
for DMA mapping keys and ICID used for accessing them.
-keys are DMA mapped using a job ring device, thus a job ring ICID
-keys are accessed from descriptors enqueued via Queue Interface,
thus using QI ICID
[Note: ICIDs of JRs, QI are configured by U-boot / other entity by:
-fixing up the corresponding job ring and controller DT nodes
-setting up corresponding caam ICID registers]
In order to avoid IOMMU faults, DMA map the key using the controller
device instead of a job ring device.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When IOMMU is enabled, iova -> phys address translation should be
performed using iommu_ops, not dma_to_phys().
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the controller device for caam/qi instead of allocating
a new platform device.
This is needed as a preparation to add support for working behind an
SMMU. A platform device allocated using platform_device_register_full()
is not completely set up - most importantly .dma_configure()
is not called.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.
There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).
Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs
Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().
While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect
The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.
Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Fixes: 763069ba49 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a zero length request is submitted through the skcipher api,
do not offload it and return success.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL if a request for a block cipher is not multiple of the
size of the block.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an invalid key is provided as input to the setkey function, the
function always failed returning -ENOMEM rather than -EINVAL.
Furthermore, if setkey was called multiple times with an invalid key,
the device instance was getting leaked.
This patch fixes the error paths in the setkey functions by returning
the correct error code in case of error and freeing all the resources
allocated in this function in case of failure.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The block size for aes counter mode was improperly set to AES_BLOCK_SIZE.
This sets it to 1 as it is a stream cipher.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate a contiguous buffer and instruct the qat hardware to return the
iv at the end of an encryption or decryption operation.
The iv is copied to the array provided by the user in the callback
function.
This problem was found with by the crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The offset is calculated based on type of hash algorithum.
If the algorithum is invalid the offset can have negative value.
Hence added negative offset check and return -EFAULT.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com>
Tested-by: Sergey Portnoy <sergey.portnoy@intel.com>
Signed-off-by: Shant KumarX Sonnad <shant.kumarx.sonnad@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Pull crypto fixes from Herbert Xu:
- Two long-standing bugs in the powerpc assembly of vmx
- Stack overrun caused by HASH_MAX_DESCSIZE being too small
- Regression in caam
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - ghash: do nosimd fallback manually
crypto: vmx - CTR: always increment IV as quadword
crypto: hash - fix incorrect HASH_MAX_DESCSIZE
crypto: caam - fix typo in i.MX6 devices list for errata
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation 51
franklin street fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154042.432790911@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMX ghash was using a fallback that did not support interleaving simd
and nosimd operations, leading to failures in the extended test suite.
If I understood correctly, Eric's suggestion was to use the same
data format that the generic code uses, allowing us to call into it
with the same contexts. I wasn't able to get that to work - I think
there's a very different key structure and data layout being used.
So instead steal the arm64 approach and perform the fallback
operations directly if required.
Fixes: cc333cd68d ("crypto: vmx - Adding GHASH routines for VMX module")
Cc: stable@vger.kernel.org # v4.1+
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"
Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.
In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.
In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.
In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.
Use vadduqm.
This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!
Fixes: 5c380d623e ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix a typo in the list of i.MX6 devices affected by an
issue wherein AXI bus transactions may not occur in
the correct order.
Fixes: 33d69455e4 ("crypto: caam - limit AXI pipeline to a depth of
1")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
- Cleanups of Davinci
This tag also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release.
-----BEGIN PGP SIGNATURE-----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=pUeO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms.
Major themes this release:
- Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
- Moving some of the ep93xx headers around to get it closer to
multiplatform enabled.
- Cleanups of Davinci
This also contains a few patches that were queued up as fixes before
5.1 but I didn't get sent in before release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
ARM: debug-ll: add default address for digicolor
ARM: u300: regulator: add MODULE_LICENSE()
ARM: ep93xx: move private headers out of mach/*
ARM: ep93xx: move pinctrl interfaces into include/linux/soc
ARM: ep93xx: keypad: stop using mach/platform.h
ARM: ep93xx: move network platform data to separate header
ARM: stm32: add AMBA support for stm32 family
MAINTAINERS: update arch/arm/mach-davinci
ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
soc: ixp4xx: qmgr: Add DT probe code
soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
soc: ixp4xx: npe: Add DT probe code
soc: ixp4xx: Add DT bindings for IXP4xx NPE
soc: ixp4xx: qmgr: Pass resources
soc: ixp4xx: Remove unused functions
soc: ixp4xx: Uninline several functions
soc: ixp4xx: npe: Pass addresses as resources
ARM: ixp4xx: Turn the QMGR into a platform device
ARM: ixp4xx: Turn the NPE into a platform device
...
Merge in a few pending fixes from pre-5.1 that didn't get sent in:
MAINTAINERS: update arch/arm/mach-davinci
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
ARM: dts: imx6q-logicpd: Reduce inrush current on start
ARM: dts: imx: Fix the AR803X phy-mode
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull crypto fixes from Herbert Xu:
"This fixes a number of issues in the chelsio and caam drivers"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "crypto: caam/jr - Remove extra memory barrier during job ring dequeue"
crypto: caam - fix caam_dump_sg that iterates through scatterlist
crypto: caam - fix DKP detection logic
MAINTAINERS: Maintainer for Chelsio crypto driver
crypto: chelsio - count incomplete block in IV
crypto: chelsio - Fix softlockup with heavy I/O
crypto: chelsio - Fix NULL pointer dereference
The detection for DKP (Derived Key Protocol) relied on the value
of the setkey function. This was broken by the recent change which
added des3_aead_setkey.
This patch fixes this by introducing a new flag for DKP and setting
that where needed.
Fixes: 1b52c40919 ("crypto: caam - Forbid 2-key 3DES in FIPS mode")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The partial block should count as one and appropriately appended
to IV. eg 499B for AES CTR should count 32 block than 31 and
correct count value is updated in iv out.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
removed un-necessary lock_chcr_dev to protect device state
DETACH. lock is not required to protect I/O count
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not request FW to generate cidx update if there is less
space in tx queue to post new request.
SGE DBP 1 pidx increment too large
BUG: unable to handle kernel NULL pointer dereference at
0000000000000124
SGE error for queue 101
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto update from Herbert Xu:
"API:
- Add support for AEAD in simd
- Add fuzz testing to testmgr
- Add panic_on_fail module parameter to testmgr
- Use per-CPU struct instead multiple variables in scompress
- Change verify API for akcipher
Algorithms:
- Convert x86 AEAD algorithms over to simd
- Forbid 2-key 3DES in FIPS mode
- Add EC-RDSA (GOST 34.10) algorithm
Drivers:
- Set output IV with ctr-aes in crypto4xx
- Set output IV in rockchip
- Fix potential length overflow with hashing in sun4i-ss
- Fix computation error with ctr in vmx
- Add SM4 protected keys support in ccree
- Remove long-broken mxc-scc driver
- Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
crypto: ccree - use a proper le32 type for le32 val
crypto: ccree - remove set but not used variable 'du_size'
crypto: ccree - Make cc_sec_disable static
crypto: ccree - fix spelling mistake "protedcted" -> "protected"
crypto: caam/qi2 - generate hash keys in-place
crypto: caam/qi2 - fix DMA mapping of stack memory
crypto: caam/qi2 - fix zero-length buffer DMA mapping
crypto: stm32/cryp - update to return iv_out
crypto: stm32/cryp - remove request mutex protection
crypto: stm32/cryp - add weak key check for DES
crypto: atmel - remove set but not used variable 'alg_name'
crypto: picoxcell - Use dev_get_drvdata()
crypto: crypto4xx - get rid of redundant using_sd variable
crypto: crypto4xx - use sync skcipher for fallback
crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
crypto: crypto4xx - fix ctr-aes missing output IV
crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
crypto: ccree - handle tee fips error during power management resume
crypto: ccree - add function to handle cryptocell tee fips error
...
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFaUACgkQt6xw3ITB
YzRICQgAiv7wF/yIbBhDOmCNCAKDO59chvFQWxXWdGk/aAB56kwKAMXJgLOvlMG/
VRuuLyParTFQETC3jaxKgnO/1hb+PZLDt2Q2KqixtjIzBypKUPWvK2sf6THhSRF1
GK0DBVUd1rCrWrR815+SPb8el4xXtdBzvAVB+Fx35PXVNpdRdqCkK+EQ6UnXGokm
rXXHbnfsnquBDtmb4CR4r2beH+aNElXbdt0Kj8VcE5J7f7jTdW3z6Q9WFRvdKmK7
yrsxXXB2w/EsWXOwFp0SLTV5+fgeGgTvv8uLjDw+SG6t0E0PebxjNAflT7dPrbYL
WecjKC9WqBxrGY+4ew6YJP70ijLBCw==
=aC8m
-----END PGP SIGNATURE-----
Merge tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull mmiowb removal from Will Deacon:
"Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
The only relatively recent changes have been addressing review
comments on the documentation, which is in a much better shape thanks
to the efforts of Ben and Ingo.
I was initially planning to split this into two pull requests so that
you could run the coccinelle script yourself, however it's been plain
sailing in linux-next so I've just included the whole lot here to keep
things simple"
* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
arch: Remove dummy mmiowb() definitions from arch code
net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
i40iw: Redefine i40iw_mmiowb() to do nothing
scsi/qla1280: Remove stale comment about mmiowb()
drivers: Remove explicit invocations of mmiowb()
drivers: Remove useless trailing comments from mmiowb() invocations
Documentation: Kill all references to mmiowb()
riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
m68k/io: Remove useless definition of mmiowb()
nds32/io: Remove useless definition of mmiowb()
x86/io: Remove useless definition of mmiowb()
arm64/io: Remove useless definition of mmiowb()
ARM/io: Remove useless definition of mmiowb()
mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
...
We build an explicit little endian value from the IDR register
values. Use a proper le32 type to mark the var as such to
satisfy Sparse.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: dcf6285d18 ("crypto: ccree - add CID and PID support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/ccree/cc_cipher.c: In function cc_setup_key_desc:
drivers/crypto/ccree/cc_cipher.c:645:15: warning: variable du_size set but not used [-Wunused-but-set-variable]
It is never used since introduction in
commit dd8486c750 ("crypto: ccree - move key load desc. before flow desc.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix sparse warning:
drivers/crypto/ccree/cc_driver.c:37:6: warning:
symbol 'cc_sec_disable' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_dbg message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 307244452d ("crypto: caam - generate hash keys in-place")
fixed ahash implementation in caam/jr driver such that user-provided key
buffer is not DMA mapped, since it's not guaranteed to be DMAable.
Apply a similar fix for caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commits c19650d6ea ("crypto: caam - fix DMA mapping of stack memory")
and 65055e2108 ("crypto: caam - fix hash context DMA unmap size")
fixed the ahash implementation in caam/jr driver such that req->result
is not DMA-mapped (since it's not guaranteed to be DMA-able).
Apply a similar fix for ahash implementation in caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 04e6d25c5b ("crypto: caam - fix zero-length buffer DMA mapping")
fixed an issue in caam/jr driver where ahash implementation was
DMA mapping a zero-length buffer.
Current commit applies a similar fix for caam/qi2 driver.
Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 3f16f6c9d6 ("crypto: caam/qi2 - add support for ahash algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
