After:
-----------------------------------------------------------------------------------
Task | runtime ms | switches | average delay ms | maximum delay ms |
-----------------------------------------------------------------------------------
migration/0 | 0.000 ms | 1 | avg: 0.047 ms | max: 0.047 ms |
ksoftirqd/0 | 0.000 ms | 1 | avg: 0.039 ms | max: 0.039 ms |
migration/1 | 0.000 ms | 3 | avg: 0.013 ms | max: 0.016 ms |
migration/3 | 0.000 ms | 2 | avg: 0.003 ms | max: 0.004 ms |
migration/4 | 0.000 ms | 1 | avg: 0.022 ms | max: 0.022 ms |
distccd | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms |
distccd | 0.000 ms | 1 | avg: 0.014 ms | max: 0.014 ms |
distccd | 0.000 ms | 2 | avg: 0.000 ms | max: 0.000 ms |
distccd | 0.000 ms | 2 | avg: 0.012 ms | max: 0.019 ms |
distccd | 0.000 ms | 1 | avg: 0.002 ms | max: 0.002 ms |
as | 0.000 ms | 2 | avg: 0.019 ms | max: 0.019 ms |
as | 0.000 ms | 3 | avg: 0.015 ms | max: 0.017 ms |
as | 0.000 ms | 1 | avg: 0.009 ms | max: 0.009 ms |
perf | 0.000 ms | 1 | avg: 0.001 ms | max: 0.001 ms |
gcc | 0.000 ms | 1 | avg: 0.021 ms | max: 0.021 ms |
run-mozilla.sh | 0.000 ms | 2 | avg: 0.010 ms | max: 0.017 ms |
mozilla-plugin- | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms |
gcc | 0.000 ms | 2 | avg: 0.013 ms | max: 0.013 ms |
-----------------------------------------------------------------------------------
(The runtime ms column is not filled in yet.)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Separate the latency and the replay commands more cleanly
- Use consistent naming
- Display help page on 'perf sched' outlining comments,
instead of aborting
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the -l --latency option that reports statistics about the
scheduler latencies.
For now, the latencies are measured in the following sequence
scope:
- task A is sleeping (D or S state)
- task B wakes up A
^
|
|
latency timeframe
|
|
v
- task A is scheduled in
Start by recording every scheduler events:
perf record -e sched:*
and then fetch the results:
perf sched -l
Tasks count total avg max
migration/0 2 39849 19924 28826
ksoftirqd/0 7 756383 108054 373014
migration/1 5 45391 9078 10452
ksoftirqd/1 2 399055 199527 359130
events/0 8 4780110 597513 4500250
events/1 9 6353057 705895 2986012
kblockd/0 42 37805097 900121 5077684
The snapshot are in nanoseconds.
- Count: number of snapshots taken for the given task
- Total: total latencies in nanosec
- Avg : average of latency between wake up and sched in
- Max : max snapshot latency
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a sched event structure of handlers in which various
sched events reader can plug their own callbacks.
This makes easier the addition of new perf sched sub commands.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf sched raises the following error when it meets a sched
switch event:
perf: builtin-sched.c:286: register_pid: Assertion `!(pid >= 65536)' failed.
Abandon
Currently in x86-64, the sched switch events have a hole in the
middle of the structure:
u16 common_type;
u8 common_flags;
u8 common_preempt_count;
u32 common_pid;
u32 common_tgid;
char prev_comm[16];
u32 prev_pid;
u32 prev_prio;
<--- there
u64 prev_state;
char next_comm[16];
u32 next_pid;
u32 next_prio;
Gcc inserts a 4 bytes hole there for prev_state to be u64
aligned. And the events are exported to userspace with this
hole.
But in userspace, from perf sched, we fetch it using a
structure that has a new field in the beginning: u32 size. This
is because our trace is exported with its size as a field. But
now that we have this new field, the hole in the middle
disappears because it makes prev_state becoming well aligned.
And since we are using a pointer to the raw trace using this
struct, instead of reading prev_state, we are reading the hole.
We could fix it by keeping the size seperate from the struct
but actually there a lot of other potential problems: some
fields may be saved as long in a 64 bits system and later read
as long in a 32 bits system. Also this direct cast doesn't care
about the endianness differences between the host traced
machine and the machine in which we do the post processing.
So instead of using such dangerous direct casts, fetch the
values using the trace parsing API that already takes care of
all these problems.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, when one wants to activate every tracepoint
counters of a subsystem from perf record, the current sequence
is needed:
perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3
This may annoy the most patient of us.
Now we can just do:
perf record -e subsys:*
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Various small cleanups - removal of debug printks and dead
functions, etc.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Import the schedbench.c tool that i wrote some time ago to
simulate scheduler behavior but never finished. It's a good
basis for perf sched nevertheless.
Most of its guts are not hooked up to the perf event loop
yet - that will be done in the patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This turn-key tool allows scheduler measurements to be
conducted and the results be displayed numerically.
First baby step towards that goal: clone the new command off of
perf trace.
Fix a few other details along the way:
- add (minimal) perf trace documentation
- reorder a few places
- list perf trace in the mainporcelain list as well
as it's a very useful utility.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
ring-buffer: only enable ring_buffer_swap_cpu when needed
ring-buffer: check for swapped buffers in start of committing
tracing: report error in trace if we fail to swap latency buffer
tracing: add trace_array_printk for internal tracers to use
tracing: pass around ring buffer instead of tracer
tracing: make tracing_reset safe for external use
tracing: use timestamp to determine start of latency traces
tracing: Remove mentioning of legacy latency_trace file from documentation
tracing/filters: Defer pred allocation, fix memory leak
tracing: remove users of tracing_reset
tracing: disable buffers and synchronize_sched before resetting
tracing: disable update max tracer while reading trace
tracing: print out start and stop in latency traces
ring-buffer: disable all cpu buffers when one finds a problem
ring-buffer: do not count discarded events
ring-buffer: remove ring_buffer_event_discard
ring-buffer: fix ring_buffer_read crossing pages
ring-buffer: remove unnecessary cpu_relax
ring-buffer: do not swap buffers during a commit
ring-buffer: do not reset while in a commit
...
This patch improves some (common) inefficiencies in the
handling of directory lookups:
- not using the d_type information returned by the kernel
- constructing (absolute) paths for file operation even though
directory-relative operations using the *at functions is
possible
There are more places to fix but this is a start.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090904193951.GB6186@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove some, now useless, global storage.
Don't calculate the stddev when not needed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the more advanced single pass variance algorithm outlined
on the wikipedia page. This is numerically more stable for
larger sample sets.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we're computing the mean by sampling the distribution,
then the std dev of the mean is related to the std dev of the
sample set by:
stddev_mean = std_dev / sqrt(N)
Which is exactly what we want.
This results in the error on the mean decreasing with
increasing number of samples.
Also fix the scaled == -1, aka not counted case.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we don't need all the individual samples to calculate the
error remove both the limit and the storage overhead associated
with that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The current noise computation does:
\Sum abs(n_i - avg(n)) * N^-1.5
Which is (afaik) not a regular noise function, and needs the
complete sample set available to post-process.
Change this to use a regular stddev computation which can be
done by keeping a two sums:
stddev = sqrt( 1/N (\Sum n_i^2) - avg(n)^2 )
For which we only need to keep \Sum n_i and \Sum n_i^2.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This wires up the perf_counter_open() syscall so that basic
software support for perf is working.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We did not account for the enclosing \0. Depending on what malloc()
gave us this resulted in corrupted version string printouts.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print out more accurate timestamps - usecs does not cut it
anymore on fast enough boxes ;-)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Leave the input fd at the data area.
It does not matter right now - but seeking at the end of it
certainly did not make sense.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We started parsing perf.data at head 0. This caused -D to
segfault and it could possibly also case incorrect trace
entries to be displayed.
Parse it at data_offset instead.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Older versions of GCC are rather stupid about strict aliasing:
util/trace-event-parse.c: In function 'parse_cmdlines':
util/trace-event-parse.c:93: warning: dereferencing type-punned pointer will break strict-aliasing rules
util/trace-event-parse.c: In function 'parse_proc_kallsyms':
util/trace-event-parse.c:155: warning: dereferencing type-punned pointer will break strict-aliasing rules
util/trace-event-parse.c:157: warning: dereferencing type-punned pointer will break strict-aliasing rules
util/trace-event-parse.c:158: warning: dereferencing type-punned pointer will break strict-aliasing rules
util/trace-event-parse.c: In function 'parse_ftrace_printk':
util/trace-event-parse.c:294: warning: dereferencing type-punned pointer will break strict-aliasing rules
util/trace-event-parse.c:295: warning: dereferencing type-punned pointer will break strict-aliasing rules
make: *** [util/trace-event-parse.o] Error 1
Make it clear to GCC that we intend with those pointers, by passing
them through via an explicit (void *) cast.
We might want to add -fno-strict-aliasing as well, like the kernel
itself does.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make it easier to turn warnings on/off by using a separate
line for each warning added.
Some of the warnings have too much of a nuisance factor and
we might want to turn them off in the future.
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In perf tools, we hardcode the pid 0 cmdline resolving to
"idle" because the init task is not included in the COMM
events.
But the idle tasks secondary cpus are resolved into their
"init" name through the COMM events.
We have then such strange result in perf report (ditto with
trace):
19.66% init [kernel] [k] acpi_idle_enter_c1
17.32% [idle] [kernel] [k] acpi_idle_enter_c1
It's then better to unify the swapper tasks into a single init
name.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
The cmd-trace tool used the cmdline file and resolved the idle
thread using a hardcoded check for the 0 task pid.
Now we have a centralized way to do that from perf using
register_idle_thread() API.
Before:
:0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name
:0-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name
After:
[idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name
[idle]-0 [000] 0.000000: irq_handler_entry: irq=0 handler=name
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1251693921-6579-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: this topic is ready now to merge into the main
development branch for .32, with functional
perf trace output.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This improves patch fa6963b24 so that perf.data stuff that has
been dumped as root can be read (annotate/report) by a user
without the use of the --force.
Rationale is that root has plenty of ways to screw us (usually)
that do not require twisted schemes involving specially
crafting a perf.data.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <20090827075902.GF19653@laphroaig.corp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While opening a trace event counter, every events are saved in
the trace.info file. But we only want to save the
specifications of the events we are using.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add OPT_END to option array of perf-trace for fixing a SEGV bug when
showing perf-trace help message.
Without this patch;
./perf trace -h
usage: perf trace [<options>] <command>
-D, --dump-raw-trace dump raw trace in ASCII
-v, --verbose be more verbose (show symbol address, etc)
-f, Segmentation fault
With this patch:
./perf trace -h
usage: perf trace [<options>] <command>
-D, --dump-raw-trace dump raw trace in ASCII
-v, --verbose be more verbose (show symbol address, etc)
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090821185603.11039.62109.stgit@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add an owner check to opening perf.data files and a switch to
silence it.
Because perf-report/perf-annotate are binary parsers reading
another users' perf.data file could be a security risk if the
file were explicitly engineered to trigger bugs in the parser
(we hope of course there are non such bugs, but you never
know).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090819092023.896648538@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pushd tools/perf/Documentation
make html
popd
is failing for me...
ASCIIDOC perf-annotate.html
ERROR: unsafe: include file: /etc/asciidoc/./stylesheets/xhtml11.css
ERROR: unsafe: include file:
/etc/asciidoc/./stylesheets/xhtml11-manpage.css
ERROR: unsafe: include file:
/etc/asciidoc/./stylesheets/xhtml11-quirks.css
make: *** [perf-annotate.html] Error 1
Apparently asciidoc "unsafe" is the default mode of operation
in practice.
https://bugzilla.redhat.com/show_bug.cgi?id=506953
Works tidily now.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090818164125.GM25206@bombadil.infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The librarization of the thread helpers between annotate and
report lost some perf report specifics.
thread__insert_map() had its most uptodate version in perf
report which cared about partial map overlapping. In case of
overlap between two maps, perf annotate's version removes the
whole old map without considering if it partially or
absolutely overlaps the new map.
We exported the odd version, change it by using the perf
report version.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250607843-7395-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The librarization of the thread helpers between annotate and
report lost some perf report specifics.
This patch fixes the thread comm column adjusting that has
been omitted during this export.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250604226-6852-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus reported this perf annotate segfault:
[torvalds@nehalem git]$ perf annotate unmap_vmas
Segmentation fault
#0 map__clone (self=<value optimized out>) at builtin-annotate.c:236
#1 thread__fork (self=<value optimized out>) at builtin-annotate.c:372
The bug here was that builtin-annotate.c was a copy of
builtin-report.c and a threading related fix to builtin-report.c
didnt get propagated to builtin-annotate.c ...
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The _XOPEN_SOURCE* defines are not really needed on Linux and
it's not like we'll port this to AIX ;-)
The define also broke the build with gcc 4.4.1:
CC util/trace-event-parse.o
In file included from util/trace-event-parse.c:32:
util/util.h:43:1: error: "_XOPEN_SOURCE" redefined
So remove them.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ftrace event format parser handles the usual casts but not
the cast to pointers. Such casts have been introduced recently
with the module trace events and raise the following parsing
error:
Fatal: bad op token )
This is because it considers the "*" character as a binary
operator. Make it then aware of casts to pointers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
You can enable a counter's PERF_SAMPLE_RAW attribute in two
fashions:
- using the -R option (every counters get PERF_SAMPLE_RAW)
- using the :record suffix in a trace event counter name
Currently we record the events info in a trace.info file from
perf record when the former method is used but we omit it with
the latter.
Check both situations.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a user runs perf trace using an input with logged
counters without PERF_SAMPLE_RAW attribute, warn by giving a
nice tip.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While running perf report -g in a perf.data file that hasn't
been recorded in callchain mode, the error reported has a
spelling issue:
./perf report -g
selected -c but no callchain data. Did you call perf record without -g?
Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1250543271-8383-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add util/trace-event-parse.c which provides the handlers to
parse the ftrace events info from the stream and handles the
ftrace perf samples event printing.
This file is a rename of the parse-events.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This is a perf tools integration.
[ fweisbec@gmail.com: various changes for perf tools
integration. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add util/trace-event-read.c which handles trace events
informations reading.
This file is a rename of the trace-read.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This is its perf tools integration.
[ fweisbec@gmail.com: various changes for perf tools
integration. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add util/trace-event-info.c which handles ftrace file IO from
debugfs and provides general helpers to fetch/save ftrace
events informations.
This file is a rename of the trace-cmd.c file from the
trace-cmd tools, written by Steven Rostedt and Josh Triplett,
originated from the git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This is a perf tools integration.
For now, ftrace events information is saved in a separate file
than the standard perf.data
[fweisbec@gmail.com: various changes for perf tools integration]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Anton Blanchard <anton@samba.org>
LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename it to examples.txt to avoid the perf-*.txt pattern in
the Makefile, otherwise 'make doc' fails because
perf-examples.txt is not formatted to be a man page:
ERROR: perf-examples.txt: line 1: manpage document title is mandatory
Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Librarize trace_event() helper so that perf trace can use it
too. Also clean up the debug.h includes a bit.
It's not good to have it included in perf.h because it doesn't
make it flexible against other headers it may need (headers
that can also depend on perf.h and then create a recursive
header dependency).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Librarize the sample type and attr fetching from perf data file
headers so that we can also use it from perf trace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250448997-30715-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Annotate and report share the same flags to filter events
considering their context (kernel, user, hypervisor).
Both tools have their own definitions of these flags. Factorize
them out into the event headers file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250445414-29237-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have two users of dprintf: report and annotate. Another one
is coming with perf trace. Then factorize it into the debug
file.
While at it, rename dprintf() to dump_printf() so that it
doesn't conflicts with its libc homograph.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250443461-28130-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The soon coming perf trace needs to use printf with dynamically
built formats.
But we are using -Wformat=2 which is a shortcut for the
following set: -Wformat -Wformat-security -Wformat-y2k
-Wformat-nonliteral
-Wformat-nonliteral warns when it can't check formats because
they are not builtin constant strings, but we want to feature
dynamic formats. What we want instead is Wformat=2 minus
-Wformat-nonliteral, which is what this patch does.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250437927-25490-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Up our defences a bit.
Suggested-by: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Related to a shadowed variable bug fix Valdis Kletnieks noticed
that perf does not get built with -Wshadow, which could have
helped us avoid the bug.
So enable -Wshadow and also enable the following warnings on
perf builds, in addition to the already enabled -Wall -Wextra
-std=gnu99 warnings:
-Wcast-align
-Wformat=2
-Wshadow
-Winit-self
-Wpacked
-Wredundant-decls
-Wstack-protector
-Wstrict-aliasing=3
-Wswitch-default
-Wswitch-enum
-Wno-system-headers
-Wundef
-Wvolatile-register-var
-Wwrite-strings
-Wbad-function-cast
-Wmissing-declarations
-Wmissing-prototypes
-Wnested-externs
-Wold-style-definition
-Wstrict-prototypes
-Wdeclaration-after-statement
And change/fix the perf code to build cleanly under GCC 4.3.2.
The list of warnings enablement is rather arbitrary: it's based
on my (quick) reading of the GCC manpages and trying them on
perf.
I categorized the warnings based on individually enabling them
and looking whether they trigger something in the perf build.
If i liked those warnings (i.e. if they trigger for something
that arguably could be improved) i enabled the warning.
If the warnings seemed to come from language laywers spamming
the build with tons of nuisance warnings i generally kept them
off. Most of the sign conversion related warnings were in
this category. (A second patch enabling some of the sign
warnings might be welcome - sign bugs can be nasty.)
I also kept warnings that seem to make sense from their manpage
description and which produced no actual warnings on our code
base. These warnings might still be turned off if they end up
being a nuisance.
I also left out a few warnings that are not supported in older
compilers.
[ Note that these changes might break the build on older
compilers i did not test, or on non-x86 architectures that
produce different warnings, so more testing would be welcome. ]
Reported-by: Valdis.Kletnieks@vt.edu
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Factorize the thread management code used by perf-annotate and
perf-report in dedicated source and header files.
v2: pass last_match by address so that it can actually be
modified.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250245313-6995-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
kernel/perf_counter.c
Merge reason: update to latest upstream (-rc6) and resolve
the conflict with urgent fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just to make it clear that these are _not_ generic event
structures but do rely on the counter configuration.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey J Ashford <cjashfor@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
LKML-Reference: <20090813103655.334194326@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We were using 'fd' locally, but there was a global 'fd' too, so
when converting from open to fopen the test made against fd
should be made against 'fp', but since we have that global
it didnt get discovered ...
Reported-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090814182632.GF3490@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We're interested in just those symbols/DSOs, so filter out the
unresolved ones.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812211957.GE3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While we can enable the perf sample records per tracepoint
counter, we may also want to enable this option for every
tracepoint counters to open, so that we don't need to add a
:record flag for all of them.
Add the -R, --raw-samples options for this purpose.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a new flag field while opening a tracepoint perf counter:
-e tracepoint_subsystem:tracepoint_name:flags
This is intended to be generic although for now it only supports the
r[e[c[o[r[d]]]]] flag:
./perf record -e workqueue:workqueue_insertion:record
./perf record -e workqueue:workqueue_insertion:r
will have the same effect: enabling the raw samples record for
the given tracepoint counter.
In the future, we may want to support further flags, separated
by commas.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When /sys/kernel/debug is mounted the list can be imense, so
use the pager like the other tools.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812174459.GB3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf top supports a -C for setting the profile CPU, but perf
record does not. This adds the same option for perf record,
allowing the user to specify a specific target profile CPU.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090812091801.GC12579@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It is better than showing the map addr, this way at least we
know that we can't get the symtabs because the DSO was deleted
(system update) while an app still used such DSO.
Yeah, don't do that, but if you do, you'll figure it out
quicker this way.
[acme@doppio linux-2.6-tip]$ perf report | head -15
# Samples: 3796
#
# Overhead Command Shared Object Symbol
# ........ ....... ................................................................... ......
#
23.55% pidgin /lib64/libglib-2.0.so.0.2000.4.#prelink#.Pd98lu (deleted) [.] 0x00000000038844
21.55% pidgin /lib64/libpthread-2.10.1.so.#prelink#.AFwK8Q (deleted) [.] 0x0000000000a42d
10.85% pidgin [kernel] [.] vread_hpet
7.85% pidgin /lib64/libgobject-2.0.so.0.2000.4.#prelink#.o1vpU7 (deleted) [.] 0x00000000014de8
3.35% pidgin /lib64/libc-2.10.1.so (deleted) [.] 0x0000000007a875
3.19% pidgin /lib64/libdbus-1.so.3.4.0.#prelink#.6mwgZP (deleted) [.] 0x0000000001d254
3.06% pidgin /usr/lib64/libgtk-x11-2.0.so.0.1600.5.#prelink#.511hAl (deleted) [.] 0x000000002334e7
2.90% pidgin /usr/lib64/libgdk-x11-2.0.so.0.1600.5.#prelink#.5qlMo1 (deleted) [.] 0x00000000037b2d
1.84% pidgin [kernel] [k] do_sys_poll
1.45% pidgin /usr/lib64/libX11.so.6.2.0.#prelink#.iR59Rx (deleted) [.] 0x0000000004c751
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811200436.GA3478@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In old binutils we can't access bfd_demangle(), use
cplus_demangle() just like oprofile.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192211.GG18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This made it easier to find the firefox threading related
bug.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090811192138.GE18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Noticed when trying to record events for a firefox thread. We
were synthesizing both .tid and .pid with the pid passed via
--pid.
Fix it by reading /proc/PID/status and getting the tgid
to use in .pid, .tid gets the specified "pid".
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090811192200.GF18061@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Factorize the dso mapping helpers into a single purpose common file
"util/map.c"
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Factorize the multiple definition of the events structures into a
single util/event.h file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Factorize multiple definitions of high level dso helpers into the
symbol source file.
The side effect is a general export of the verbose and eprintf
debugging helpers into a new file dedicated to debugging purposes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
The new syscall tracepoints names can be too long for the 'perf list'
output.
Add a few more characters.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
If --pretty=raw is given to perf report -T, it now displays one
line per-thread per-counter with the raw event id added.
We get:
# PID TID Name Raw Count
18608 18609 cache-misses 28e 416744
18608 18609 cache-references 28f 6456792
18608 18608 cache-misses 28e 448219
18608 18608 cache-references 28f 7270244
instead of:
# PID TID cache-misses cache-references
18608 18609 416744 6456792
18608 18608 448219 7270244
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4A802008.5050409@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sometimes we get callchain branches that have a rate under the
limit given by the user.
Say you launched:
perf record -f -g -a ./hackbench 10
perf report -g fractal,10.0
And you got:
2.33% hackbench [kernel] [k] _spin_lock_irqsave
|
|--78.57%-- remove_wait_queue
| poll_freewait
| do_sys_poll
| sys_poll
| sysenter_dispatch
| 0xf7ffa430
| 0x1ffadea3c
|
|--7.14%-- __up_read
| up_read
| do_page_fault
| page_fault
| 0xf7ffa430
| 0xa0df710000000a
...
It is abnormal to get a 7.14% branch whereas we passed a 10%
filter.
The problem is that we round down the minimum threshold. This
happens mostly when we have very low number of events. If the
total amount of your branch is 4 and you have a subranch of 3
events, filtering to 90% will be computed like follows:
limit = 4 * 0.9;
The result is about 3.6, but the cast to integer will round
down to 3. It means that our filter is actually of 75%
We must then explicitly round up the minimum threshold.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@redhat.com
Cc: peterz@infradead.org
Cc: efault@gmx.de
LKML-Reference: <20090809024235.GA10146@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Improve and fix the handling of per-thread counter stats
recorded via perf record -s. Previously we only displayed
it in debug printouts (-D) and even that output was hard
to disambiguate.
I moved everything to utils/values.[ch] so that we may reuse
it in perf stat.
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Then it'll be easy to add --pretty=raw to display a single line per thread/event.
By the way, -S was also used for --symbol... So I used -T/--thread here.
perf report: Add -T/--threads to display per-thread counter values
We get something like this now:
# PID TID cache-misses cache-references
4658 4659 495581 3238779
4658 4662 498246 3236823
4658 4663 499531 3243162
Per-thread arrays of counter values are managed in utils/values.[ch]
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to a libz dependency in some distro's binutils package,
C++ demangle support isn't compiled in despite the necessary
libraries being available.
Fix this by adding a -lz link test to the dependency detection
rules.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1249733655.6929.5.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A few examples of how 'perf' can be used, from an e-mail by
Ingo Molnar http://lkml.org/lkml/2009/8/4/346.
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <20090805185334.GA4535@Pilar.aei.mpg.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we filter the callchains below a given percentage, we
ignore them and the end result only shows entries that have an
upper percentage than the filter threshold.
It seems to users then that we have an imbalance in the
percentage, as if the sum inside a profiled branch doesn't
reach 100%.
Since in the past there have been real perf report bugs that
showed the same sypmtom, it would be nice to assure the user
that the data is perfect and trustable and it all sums up to
100.00%.
So fix this by displaying the remaining hits that have been
filtered but without more detail than their amount in each
branches. Example while filtering below 50%:
7.73% [k] delay_tsc
|
|--98.22%-- __const_udelay
| |
| |--86.37%-- ath5k_hw_register_timeout
| | ath5k_hw_noise_floor_calibration
| | ath5k_hw_reset
| | ath5k_reset
| | ath5k_config
| | ieee80211_hw_config
| | |
| | |--88.53%-- ieee80211_scan_work
| | | worker_thread
| | | kthread
| | | child_rip
| | --11.47%-- [...]
| --13.63%-- [...]
--1.78%-- [...]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.
So if the recording includes call-chains, display the callchain by
default from perf report.
( The user can override this default using "-g none" option from
perf report. )
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the callchain tree comes to insert an empty backtrace, it
raises a spurious warning about the fact we are inserting an
empty. This is spurious because the radix tree assumes it did
something wrong to reach this state. But it didn't, we just met
an empty callchain that has to be ignored.
This happens occasionally with certain types of call-chain
recordings. If it happens it's a big nuisance as perf report
output starts with thousands of warning lines.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1. Ignore the -A argument if there is no perf.data file
2. Treat an empty file like a non existent file.
Else, perf will try to read the perf.data header, and fail with
an error.
Treating an empty file like a non-existent file makes sense,
since an interupted (as in SIGKILLed) perf could leave such
files around, and you don't want to annoy the user with errors
for files with no data in it.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While toying with perf, I've noticed that perf record can
easily enter a busy loop when doing something as silly as:
$ perf record -A ls
Yeah, do_read here really wants to read a known size, not being
able to should die(), not busy-loop ;)
That was the cause for the bug.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We want to use a coherent flag for -S/--stat across all tools,
so free up -S in perf stat.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Used with perf report --verbose:
[acme@doppio linux-2.6-tip]$ perf report -v | head -16
5.17% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
2.56% firefox /lib64/libpthread-2.10.1.so 0x0000000000008e02 d [.] __pthread_mutex_lock_internal
1.94% firefox /usr/lib64/xulrunner-1.9.1/libxul.so 0x0000000000d0af8f f [.] SearchTable
1.75% firefox [kernel] 0xffffffffff60013b k [.] vread_hpet
1.63% firefox /lib64/libpthread-2.10.1.so 0x000000000000a404 d [.] __pthread_mutex_unlock
1.47% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
1.42% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
1.24% firefox [kernel] 0xffffffff8102ca4a k [k] read_hpet
1.16% firefox [kernel] 0xffffffff810f3dd4 k [k] fget_light
1.11% firefox /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
0.98% firefox /usr/lib64/firefox-3.5.2/firefox 0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$
The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brice Goglin reported:
> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.
Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Brice Goglin reported that only the first result from a
multi-counter perf record --stat run is accurate, the
rest looks bogus.
A silly mistake made us re-read the first attribute for
every recorded attribute.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.
This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.
This patch also fixes another mistake with the hit counting.
Now the rates are correct.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf_counter tools: update perf top manual page to reflect
current implementation.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pressing any key which is not currently mapped to
functionality, based on startup command line options, displays
currently mapped keys, and prompts for input.
Pressing any unmapped key at the prompt returns the user to
display mode with variables unchanged. eg, pressing ? <SPACE>
<ESC> etc displays currently available keys, the value of the
variable associated with that key, and prompts.
Pressing same again aborts input.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch implements the kernel side support for ftrace event
record sampling.
A new counter sampling attribute is added:
PERF_SAMPLE_TP_RECORD
which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.
Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:
perf record -f -F 1 -a -e workqueue:workqueue_execution
perf report -D
0x21e18 [0x48]: event: 9
.
. ... raw event: size 72 bytes
. 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........
. 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!......
. 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve
. 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1...........
. 0040: e0 b1 31 81 ff ff ff ff .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33
The raw ftrace binary record starts at offset 0020.
Translation:
struct trace_entry {
type = 0x2b = 43;
flags = 1;
preempt_count = 2;
pid = 0xa = 10;
tgid = 0xa = 10;
}
thread_comm = "events/1"
thread_pid = 0xa = 10;
func = 0xffffffff8131b1e0 = flush_to_ldisc()
What will come next?
- Userspace support ('perf trace'), 'flight data recorder' mode
for perf trace, etc.
- The unconditional copy from the profiling callback brings
some costs however if someone wants no such sampling to
occur, and needs to be fixed in the future. For that we need
to have an instant access to the perf counter attribute.
This is a matter of a flag to add in the struct ftrace_event.
- Take care of the events recursivity! Don't ever try to record
a lock event for example, it seems some locking is used in
the profiling fast path and lead to a tracing recursivity.
That will be fixed using raw spinlock or recursivity
protection.
- [...]
- Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
