Some boards have an entirely passive RGB to VGA bridge, based on DACs
implemented by resistor ladders.
Those might or might not have an i2c bus routed to the VGA connector in
order to access the screen EDIDs.
Add a bridge that doesn't do anything but expose the modes available on the
screen, either based on the EDIDs if available, or based on the XGA
standards.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.
-----BEGIN PGP SIGNATURE-----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=k9a0
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.9-rc1
Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.
* tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel
dt-bindings: Add JDI LT070ME05000 panel bindings
drm/panel: simple: Fix bus_format for the Olimex LCD-OLinuXino-4.3TS
drm/panel: simple-panel: Add delay timings for Starry KR122EA0SRA
drm/panel: simple: Fix bus flags for Ortustech com43h4m85ulc
drm/panel: simple: Add Innolux G101ICE-L01 panel
drm/panel: simple: Add delay timing for Sharp LQ123P1JX31
drm/dsi: Implement DCS set/get display brightness
drm/dsi: Order DCS helpers by command code
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
=Y/L5
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc8' into drm-next
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Iyf9
-----END PGP SIGNATURE-----
Merge tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux into drm-next
Second attempt for 3rd drm/tilcdc pull request for v4.9.
* tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux:
drm/tilcdc: fix wrong error handling
drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node()
drm/tilcdc: Remove "default" from blue-and-red-wiring property binding
drm/tilcdc: Fix non static symbol warning
drm/tilcdc: mark symbols static where possible
drm/tilcdc: add missing header dependencies
drm/tilcdc: WARN if CRTC is touched without CRTC lock
drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()
drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload()
drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
drm/tilcdc: Clean up LCDC functional clock rate setting code
drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
A bit smaller pull-req this time around. Some continued DT binding
cleanup to get the corresponding dts bits merged upstream (through
other trees). And explicit fence-fd support for submit ioctl.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: bump kernel api version for explicit fencing
drm/msm: submit support for out-fences
drm/msm: move fence allocation out of msm_gpu_submit()
drm/msm: submit support for in-fences
drm/msm: extend the submit ioctl to pass in flags
drm/msm/mdp5: Set rotation property initial value to DRM_ROTATE_0 insted of 0
drm/msm/hdmi: don't print error when adding i2c adapter fails
drm/msm/mdp4: mark symbols static where possible
drm/msm: Remove call to reservation_object_test_signaled_rcu before wait
drm/msm/hdmi: Clean up HDMI gpio DT bindings
drm/msm/mdp4: Fix issue with LCDC/LVDS port parsing
Pull input updates from Dmitry Torokhov:
"Just a fix up for the firmware handling to the Silead driver (which is
a new driver in this release)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead_gsl1680 - use "silead/" prefix for firmware loading
Input: silead_gsl1680 - document firmware-name, fix implementation
Remove "default" keyword from blue-and-red-wiring devicetree property
binding document. The code does not support and there is no intention
to support it.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Again move it from the unmaintainable csv into DOC free-form overview
sections.
v2: Types Lionel&Sean spotted.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-6-git-send-email-daniel.vetter@ffwll.ch
Try to spec a bit more precisely how they all fit together, now that
at least the code is for all the additional properties is in one
place.
Also remove the entries for the standardized properties from the
table, because that thing is supremely unmaintaineable.
v2: Fix typos Sean spotted.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-4-git-send-email-daniel.vetter@ffwll.ch
Big thing is untangling and carefully documenting the different uapi
types of planes. I also sprinkled a few more cross references around
to make this easier to discover.
As usual, remove the kerneldoc for internal functions which are not
exported. Aside: We should probably go OCD on all the ioctl handlers
and consistenly give them an _ioctl postfix.
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-2-git-send-email-daniel.vetter@ffwll.ch
Just pure code movement, cleanup and polish will happen in later
patches.
v2: Don't forget all the ioctl! To extract those cleanly I decided to
put check_src_coords into drm_framebuffer.c (and give it a
drm_framebuffer_ prefix), since that just checks framebuffer
constraints.
v3: rebase over PAGE_FLIP_TARGET.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[seanpaul]
This patch as posted on the list was rebased on:
commit 6f00975c61
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Aug 20 12:22:11 2016 +0200
drm: Reject page_flip for !DRIVER_MODESET
so as a result of moving the page_flip ioctl, this fix has
been rolled into this patch.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The JDI LT070ME05000 is a 7" panel with a 1200x1920 (WUXGA) resolution
and connected to DSI using four lanes.
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds support for Innolux Corporation 10.1" G101ICE-L01 WXGA
(1280x800) LVDS panel to the simple-panel driver.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the following changes in the HDMI gpio bindings:
- Use "-gpios" as the suffix for all the gpio names
- Move all the gpios to optional, since there are platforms that use none
of them.
- The HPD gpio is a standard one, remove the "qcom,hdmi-tx-" prefix from
it.
- Remove the HDMI DDC clk/data gpios. They are just leftovers of an old
way to configure pinctrl properties.
- Add a missing lpm gpio used on some platforms.
Make the necessary changes in the driver to incorporate these changes.
There hasn't been any upstream DT that uses the HDMI bindings, so it's
okay to change and move around these properties.
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
and the usual few fixes and enhancements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=532q
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.9
This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
and the usual few fixes and enhancements
* tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: add missing header dependencies
drm/sun4i: Add a DRC driver
drm/sun4i: backend: Handle the SAT
drm/sun4i: support A33 tcon
drm/sun4i: support TCONs without channel 1
drm/sun4i: Clear encoder->bridge if a bridge is not found
drm/sun4i: rgb: add missing calls to drm_panel_{prepare,unprepare}
drm/sun4i: Remove redundant dev_err call in sun4i_tcon_init_regmap()
drm/sun4i: Add bridge support
drm/sun4i: Move panel retrieval in RGB connector
drm/sun4i: Store TCON's device structure pointer
* tag 'topic/drm-misc-2016-09-08' of git://anongit.freedesktop.org/drm-intel:
drm: Fix error path in drm_mode_page_flip_ioctl()
Revert "drm: Unify handling of blob and object properties"
drm/udl: implement usb_driver suspend/resume.
drm: fix signed integer overflow
drm/atomic: Reject properties not part of the object.
drm/doc: Add a few words on validation with IGT
The driver has supported touchscreen-fw-name to specify the firmware to
load since it has been merged, but this was omitted from the dt-binding
documentation.
During review of adding touchscreen-fw-name to the binding documentation
it was brought up that there is a standard property name called
"firmware-name" for this, which should be used.
Since there are no users of touchscreen-fw-name yet, this commit
adds documentation of "firmware-name" to the dt-binding documentation
and switches the driver over to use this.
This commit also makes the driver add a "silead/" prefix to the
firmware name from dt before calling request_firmware. That the
firmware files are stored under /lib/firmware/silead under Linux
is an implementation detail and does not belong in devicetree.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull i2c fixes from Wolfram Sang:
"Mostly driver bugfixes, but also a few cleanups which are nice to have
out of the way"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Restore clock settings at resume time
i2c: Spelling s/acknowedge/acknowledge/
i2c: designware: save the preset value of DW_IC_SDA_HOLD
Documentation: i2c: slave-interface: add note for driver development
i2c: mux: demux-pinctrl: run properly with multiple instances
i2c: bcm-kona: fix inconsistent indenting
i2c: rcar: use proper device with dma_mapping_error
i2c: sh_mobile: use proper device with dma_mapping_error
i2c: mux: demux-pinctrl: invalidate properly when switching fails
- If the PM QoS framework invokes cancel_delayed_work_sync() during
early boot, it will enable interrupts which is not expected at
that point, so prevent it from happening (Tejun Heo).
- Fix cpufreq statistic documentation to follow a recent change in
behavior that forgot to update it as appropriate (Jean Delvare).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=+uoS
-----END PGP SIGNATURE-----
Merge tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"This includes a PM QoS framework fix from Tejun to prevent interrupts
from being enabled unexpectedly during early boot and a cpufreq
documentation fix.
Specifics:
- If the PM QoS framework invokes cancel_delayed_work_sync() during
early boot, it will enable interrupts which is not expected at that
point, so prevent it from happening (Tejun Heo)
- Fix cpufreq statistic documentation to follow a recent change in
behavior that forgot to update it as appropriate (Jean Delvare)"
* tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq-stats: Minor documentation fix
PM / QoS: avoid calling cancel_delayed_work_sync() during early boot
The cpufreq-stats code can no longer be built as a module, so it now
appears with square brackets in menuconfig.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 1aefc75b24 (cpufreq: stats: Make the stats code non-modular)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a slightly larger batch of fixes that we've been sitting on a few
-rcs. Most of them are simple oneliners, but there are two sets that are
slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone
SoC, among others). It's the only clock that ever has a valid offset of 0,
so a new flag needed introduction once this problem was discovered.
- A collection of CCI fixes for performance counters discovered once people
started using it on X-Gene CPUs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8pPd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This is a slightly larger batch of fixes that we've been sitting on a
few -rcs. Most of them are simple oneliners, but there are two sets
that are slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx
(beaglebone SoC, among others). It's the only clock that ever has
a valid offset of 0, so a new flag needed introduction once this
problem was discovered.
- A collection of CCI fixes for performance counters discovered once
people started using it on X-Gene CPUs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
arm-cci: pmu: Fix typo in event name
Revert "ARM: tegra: fix erroneous address in dts"
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
MAINTAINERS: add tree entry for ARM/UniPhier architecture
ARM: sun5i: Fix typo in trip point temperature
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: imx6ul: populates platform device at .init_machine
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
...
Make it clear that adding slave support shall not disable master
functionality. We can have both, so we should.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The A33 pipeline also has a component called DRC. Even though its exact
features and programming model is not known (or documented), it needs to
be clocked for the pipeline to carry the video signal all the way.
Add a minimal driver for it that just claim the needed resources for the
pipeline to operate properly.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
The A33 has an block called SAT that is part of the backend that needs to
be clocked and out of reset to be able for the backend to operate properly.
Extend the binding to have the SAT resources listed, and claim them when
the backend probes.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The A33 has a significantly different pipeline, with components that differ
too.
Make sure we had compatible for them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Register ASoC HDMI codec for audio functionality and adds device tree
binding for audio configuration.
With the registered HDMI codec the tda998x node can be used like a
regular codec node in ASoC card configurations. HDMI audio info-frame
and audio stream header is generated by the ASoC HDMI codec. The codec
also applies constraints for available sample-rates based on Edid Like
Data from the display. The device tree binding document has been
updated [1].
Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x:
Add support of a DT graph of ports"-patch [2]. There may still be some
identical lines left from the original patch and some of the ideas
have come from there.
[1] Documentation/devicetree/bindings/display/bridge/tda998x.txt
[2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Here are 3 small fixes for 4.8-rc5.
One for sysfs, one for kernfs, and one documentation fix, all for
reported issues. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK30APHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspfk8AnjB+
nWc9F3GbEhS211M7gCiby8eFAJ0QGl9iPSuIUMZ5RdkfTjAj/Un3JA==
=Yfb4
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small fixes for 4.8-rc5.
One for sysfs, one for kernfs, and one documentation fix, all for
reported issues. All of these have been in linux-next for a while"
* tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: correctly handle read offset on PREALLOC attrs
documentation: drivers/core/of: fix name of of_node symlink
kernfs: don't depend on d_find_any_alias() when generating notifications
Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4HoPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspt0MAn0wC
dYhZOUHxOptLiEkVGXFCU9kzAJ4gETEbuGn9lgp2TFATOOAN7oqPUw==
=6MKk
-----END PGP SIGNATURE-----
Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in
linux-next with no reported issues"
* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
arm: dts: rockchip: add reset node for the exist saradc SoCs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: accel: kxsd9: Fix raw read return
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
include/linux: fix excess fence.h kernel-doc notation
staging: wilc1000: correctly check if associatedsta has not been found
staging: wilc1000: NULL dereference on error
staging: wilc1000: txq_event: Fix coding error
MAINTAINERS: Add file patterns for ion device tree bindings
MAINTAINERS: Update maintainer entry for wilc1000
iio: chemical: atlas-ph-sensor: fix typo in val assignment
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: dt2811: fix a precedence bug
staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
...
Here are some small serial driver fixes for 4.8-rc5. One fixes an
oft-reported build issue with the fintek driver, another reverts a patch
that was causing problems, one fixes a crash, and some new device ids
were added.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4ScPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspmEcAn0FE
lUzWBQb4to15YXhl8wtNF9ZbAJ9Gi2r5MEfXlnLStI3XM/gq8BdXGw==
=pkwv
-----END PGP SIGNATURE-----
Merge tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 4.8-rc5. One fixes an
oft-reported build issue with the fintek driver, another reverts a
patch that was causing problems, one fixes a crash, and some new
device ids were added.
All of these have been in linux-next for a while"
* tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: added acces i/o products quad and octal serial cards
serial: 8250_mid: fix divide error bug if baud rate is 0
Revert "tty/serial/8250: use mctrl_gpio helpers"
8250/fintek: rename IRQ_MODE macro
Pull overlayfs fixes from Miklos Szeredi:
"Most of this is regression fixes for posix acl behavior introduced in
4.8-rc1 (these were caught by the pjd-fstest suite). The are also
miscellaneous fixes marked as stable material and cleanups.
Other than overlayfs code, it touches <linux/fs.h> to add a constant
with which to disable posix acl caching. No changes needed to the
actual caching code, it automatically does the right thing, although
later we may want to optimize this case.
I'm now testing overlayfs with the following test suites to catch
regressions:
- unionmount-testsuite
- xfstests
- pjd-fstest"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update doc
ovl: listxattr: use strnlen()
ovl: Switch to generic_getxattr
ovl: copyattr after setting POSIX ACL
ovl: Switch to generic_removexattr
ovl: Get rid of ovl_xattr_noacl_handlers array
ovl: Fix OVL_XATTR_PREFIX
ovl: fix spelling mistake: "directries" -> "directories"
ovl: don't cache acl on overlay layer
ovl: use cached acl on underlying layer
ovl: proper cleanup of workdir
ovl: remove posix_acl_default from workdir
ovl: handle umask and posix_acl_default correctly on creation
ovl: don't copy up opaqueness
- Fixes and improvements for XP watchpoint and events handling
- Added missing condition checks for KVM-related exclusions
- Improved interrupt affinity handling
- Fix for hrtimer use in polling mode
- Event grouping implementation improvement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXv/z2AAoJEL9jRaJfXa5PDwIIALemTZmwo9rcfS6D2XTZV9PU
QhdcJA/rcGhyF0ucmYyEcaObf3Em5V9vF2Zg95H1ZG7g/Dfl2X2UfOs03V8JfhNa
b6vbhUg9a/qkNiFbTp3sClWwFJUsOlQY1Ankaw7rv8Ug7YjI1a8PciUanWYLbIdE
Zwrw9CSnY1oHzT4XbF+9vVmX21MoDPaHuLqa4KL4tkQwzgRKijDFm7ZZ4pcP5sAV
zrORsq7D+SWiFzfH2mPtov68UY7bTHXNZzFX2DhFapqC1ft/x/KYmM1JXvZBrV/q
fHYwWXHNJaiHKMGBX+EWSoQGfj+6AGdGE7m6FXq1ITU+I1F/mpQlOqyYOIFvkPM=
=1wPT
-----END PGP SIGNATURE-----
Merge tag 'ccn/fixes-for-4.8-v2' of git://git.linaro.org/people/pawel.moll/linux into fixes
Merge "bus: ARM CCN PMU driver updates" from Paweł Moll:
- Fixes and improvements for XP watchpoint and events handling
- Added missing condition checks for KVM-related exclusions
- Improved interrupt affinity handling
- Fix for hrtimer use in polling mode
- Event grouping implementation improvement
* tag 'ccn/fixes-for-4.8-v2' of git://git.linaro.org/people/pawel.moll/linux:
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
Add missing description for rio_mport_cdev driver parameter
'dma_timeout'.
This patch is applicable to kernel versions starting from v4.6.
Link: http://lkml.kernel.org/r/20160901173104.2928-1-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's been eliminated from the sources, remove it from everywhere else.
Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add "blue-and-red-wiring"-device tree property and update devicetree
binding document.
The red and blue components are reversed between 24 and 16 bit modes
on am335x LCDC output pins. To get 24 RGB format the red and blue
wires has to be crossed and this in turn causes 16 colors output to be
in BGR format. With straight wiring the 16 color is RGB and 24 bit is
BGR.
The new property describes whether the red and blue wires are crossed
or not. If the property is not present or its value is not recognized
the legacy mode is assumed. The legacy configuration supports RGB565,
RGB888 and XRGB8888 formats. However, depending on wiring, the red and
blue colors are swapped in either 16 or 24-bit color modes.
For more details see section 3.1.1 in AM335x Silicon Errata:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
More -misc stuff
- moar drm_crtc.c split up&documentation
- some fixes for the simple kms helpers (Andrea)
- I included all the dri1 patches from David - we're not removing any code
or drivers, and it seems to have worked as a wake-up call to motivate a
few more people to upstream kms conversions for these. Feel free to
revert if you disagree strongly.
- a few other single patches
* tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits)
drm: drm_probe_helper: Fix output_poll_work scheduling
drm: bridge/dw-hdmi: Fix colorspace and scan information registers values
drm/doc: Polish docs for drm_property&drm_property_blob
drm: Unify handling of blob and object properties
drm: Extract drm_property.[hc]
drm: move drm_mode_legacy_fb_format to drm_fourcc.c
drm/doc: Polish docs for drm_mode_object
drm: Remove drm_mode_object->atomic_count
drm: Extract drm_mode_object.[hc]
drm/doc: Polish kerneldoc for encoders
drm: Extract drm_encoder.[hc]
drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y
drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit
drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc()
drm/atomic-helper: Add atomic_disable CRTC helper callback
drm: simple_kms_helper: add support for bridges
drm: simple_kms_helper: make connector optional at init time
drm/bridge: introduce bridge detaching mechanism
drm/simple-helpers: Always add planes to the state update
drm: reduce GETCLIENT to a minimum
...
Serial console is broken in v4.8-rcX. Mika and I independently bisected down to
commit 4ef03d3287 ("tty/serial/8250: use mctrl_gpio helpers").
Since neither author nor anyone else didn't propose a solution we better revert
it for now.
This reverts commit 4ef03d3287.
Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5590f3196b ("drivers/core/of: Add symlink to device-tree from
devices with an OF node") added a symlink called "of_node" to sysfs
however the documentation describes it as "of_path".
Fix the documentation to match what the code actually does.
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
1) Segregate namespaces properly in conntrack dumps, from Liping Zhang.
2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet.
3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz.
4) Fix use-after-free in tcp_xmit_retransmit_queue().
5) Userspace header fixups (use of __u32, missing includes, etc.) from
Mikko Rapeli.
6) Further refinements to fragmentation wrt gso and tunnels, from
Shmulik Ladkani.
7) Trigger poll correctly for zero length UDP packets, from Eric
Dumazet.
8) TCP window scaling fix, also from Eric Dumazet.
9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets.
10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet.
11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng.
12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet.
13) Add new device ID to alx driver, from Owen Lin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
Add Killer E2500 device ID in alx driver.
net: smc91x: fix SMC accesses
Documentation: networking: dsa: Remove platform device TODO
net/mlx5: Increase number of ethtool steering priorities
net/mlx5: Add error prints when validate ETS failed
net/mlx5e: Fix memory leak if refreshing TIRs fails
net/mlx5e: Add ethtool counter for TX xmit_more
net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ
net/mlx5e: Don't wait for SQ completions on close
net/mlx5e: Don't post fragmented MPWQE when RQ is disabled
net/mlx5e: Don't wait for RQ completions on close
net/mlx5e: Limit UMR length to the device's limitation
rhashtable: fix a memory leak in alloc_bucket_locks()
sfc: fix potential stack corruption from running past stat bitmask
team: loadbalance: push lacpdus to exact delivery
net: hns: dereference ppe_cb->ppe_common_cb if it is non-null
8139cp: Fix one possible deadloop in cp_rx_poll
i40e: Change some init flow for the client
Revert "phy: IRQ cannot be shared"
net: dsa: bcm_sf2: Fix race condition while unmasking interrupts
...
Andrew Donnellan (1):
cxl: use pcibios_free_controller_deferred() when removing vPHBs
Andrzej Hajda (1):
powerpc/powernv/pci: fix iterator signedness
Boqun Feng (1):
powerpc, hotplug: Avoid to touch non-existent cpumasks.
Christophe Leroy (1):
powerpc: sysdev: cpm: fix gpio save_regs functions
Cyril Bur (1):
powerpc: signals: Discard transaction state from signal frames
Guenter Roeck (1):
powerpc: cputhreads: Add missing include file
Markus Elfring (3):
drivers/macintosh: Delete owner assignment
powerpc/512x: Delete unnecessary assignment for the field "owner"
powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner"
Mauricio Faria de Oliveira (1):
powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)
Michael Ellerman (1):
powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support
Mukesh Ojha (1):
powerpc/powernv : Drop reference added by kset_find_obj()
Nicholas Piggin (3):
powerpc/pseries: PACA save area fix for general exception vs MCE
powerpc/pseries: PACA save area fix for MCE vs MCE
powerpc/tm: do not use r13 for tabort_syscall
Paolo Bonzini (1):
powerpc: move hmi.c to arch/powerpc/kvm/
Paul Gortmaker (1):
powerpc: migrate exception table users off module.h and onto extable.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+1I0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Ben Herrenschmidt:
"This was meant to be sent early last week, but I has a change pending
on one of the fixes and other things made me forget all about. Ugh.
We have some misc fixes for powerpc 4.8. Some trivial bits and some
regressions, and a trivial cleanup or two that I saw no point in
letting rot in patchwork"
* tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: signals: Discard transaction state from signal frames
powerpc/powernv : Drop reference added by kset_find_obj()
powerpc/tm: do not use r13 for tabort_syscall
powerpc: move hmi.c to arch/powerpc/kvm/
powerpc: sysdev: cpm: fix gpio save_regs functions
powerpc/pseries: PACA save area fix for MCE vs MCE
powerpc/pseries: PACA save area fix for general exception vs MCE
powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support
powerpc, hotplug: Avoid to touch non-existent cpumasks.
powerpc: migrate exception table users off module.h and onto extable.h
powerpc/powernv/pci: fix iterator signedness
powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)
cxl: use pcibios_free_controller_deferred() when removing vPHBs
powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner"
powerpc/512x: Delete unnecessary assignment for the field "owner"
drivers/macintosh: Delete owner assignment
powerpc: cputhreads: Add missing include file
- remove kerneldoc for drm-internal functions
- drm_property_replace_global_blob isn't actually atomic, and doesn't
need to be. Update docs&comments to match
- document all the types and try to link things a bit better
- nits all over
v2: Appease checkpatch in the moved code (Archit)
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-9-daniel.vetter@ffwll.ch
This just contains the base property classes and all the code to
handle blobs. I think for any kind of standardized/shared properties
it's better to have separate files - this is fairly big already as-is.
v2: resurrect misplaced hunk (Daniel Stone)
Cc: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-7-daniel.vetter@ffwll.ch
Just for the struct drm_mode_object base class. The header file was
already partially extracted to help untangle the include loops.
v2:
- Also move the generic get/set property ioctls. At first this seemed
like a bad idea since it requires making drm_mode_crtc_set_obj_prop
non-static. But eventually that will get split away too (like
the connector version already is) for both crtc and planes. Hence I
reconsidered.
- drm_mode_object.[hc] instead of drm_modeset.[hc], which requires
renaming the drm_modeset.h header I already started building up.
This is more consistent (matches the name of the main structure),
and I want to be able to use drm_modeset.[hc] for the basic modeset
init/cleanup functionality like drm_mode_config_init.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-3-daniel.vetter@ffwll.ch