We need to iterate over all pixel pipelines to get overall value.
Changes from v4 -> v5:
- switch back to pixel pipe 0 to prevent GPU hang
- PIXELS_RENDERED_2D is exposed for 2D pipe
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
With 'sync points' we can sample the reqeustes perform signals
before and/or after the submited command buffer.
Changes v2 -> v3:
- fixed indentation and init nr_events to 1
Changes v4 -> v5:
- simplify logic around fence handling.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Results in less code as the users do not set every struct member to 0/NULL.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
In order to support performance counters in a sane way we need to provide
a method to sync the GPU with the CPU. The GPU can process multpile command
buffers/events per irq. With the help of a 'sync point' we can trigger an event
and stop the GPU/FE immediately. When the CPU is done with is processing it
simply needs to restart the FE and the GPU will process the command stream.
Changes from v1 -> v2:
- process sync point with a work item to keep irq as fast as possible
Changes from v4 -> v5:
- renamed pmrs_* to sync_point_*
- call event_free(..) in sync_point_worker(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Changes v4 -> v5
- make use of doms_meta array
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Changes from v1 -> v2:
- renamed submit_perfmon_request() to submit_perfmon_validate()
- extended flags validation
- added comment about offset 0
- moved assigment of cmdbuf->nr_pmrs below the copy_from_user of the pmrs.
Changes from v2 -> v3:
- fixed flags validation
Changes v4 -> v5
- pass cmdbuf->exec_state to etnaviv_pm_req_validate(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Check if the selected domain and signal combination exists.
Changes from v4 to v5
- add exec_state parameter
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This commits extends etnaviv_gpu_cmdbuf_new(..) to define the number
of struct etnaviv_perfmon elements gets used.
Changes from v1 -> v2:
- make use of goto as requested by Lucas
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Sadly we can not read any registers via command stream so we need
to extend the drm_etnaviv_gem_submit struct with performance monitor
requests. Those requests gets process before or after the actual
submitted command stream.
The Vivante kernel driver has a special ioctl to read all perfmon
registers at once and return it.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Make it possible that userspace can query all performance domains and
its signals. This information is needed to sample those signals via
submit ioctl.
At the moment no performance domain is available.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
- add id member to domain and signal struct
Changes v4 -> v5
- provide for each pipe an own set of pm domains
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This makes it possible to allocate multiple events under the event
spinlock. This change is needed to support 'sync'-points.
Changes v2 -> v3:
- wait for the completion of all events
- use 10sec timeout regardless of the number of events
- removed validation if there are enough free events
- fixed return value evaluation of event_alloc(..) in etnaviv_gpu_submit(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This is prep work to be able to allocate multiple events in one go.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The reset path wants to initialize the clock control register regardless
of the DYNAMIC_FREQUENCY_SCALING feature, so don't call clock update, but
explicitly load the register.
Also disabling of the debug registers is moved into the reset function,
so we always get to the same state after a GPU reset. This means the
clock update function should not touch the bits already set in the clock
control register, but instead only update the scaling bits.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Using the IOMMU API to manage the internal GPU MMU has been an
historical accident and it keeps getting in the way, as well as
entangling the driver with the inner workings of the IOMMU
subsystem.
Clean this up by removing the usage of iommu_domain, which is the
last piece linking etnaviv to the IOMMU subsystem.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
And clean up the header file a bit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
This is a preparation to remove the etnaviv dependency on the IOMMU
subsystem by importing the relevant parts of the iommu map/unamp
functions into the driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
It wasn't protecting anything, as the single word writes used to
set up or tear down a translation are already inherently atomic,
so the spinlock is pure overhead.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
A function doing a single assignment is not really helping the
code flow.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Those functions are simple enough to fold them into the calling
function. This also fixes a correctness issue, as the alloc/free
functions didn't specifiy the device the memory was allocated for.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
They are not used in any way, so can go away.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
The handler has never been used, so it's really just dead code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-3-git-send-email-benjamin.gaignard@linaro.org
When dma_fence_get_rcu() fails to acquire a reference it doesn't necessary
mean that there is no fence at all.
It usually mean that the fence was replaced by a new one and in this situation
we certainly want to have the new one as result and *NOT* NULL.
v2: Keep extra check after dma_fence_get_rcu().
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505469187-3565-1-git-send-email-deathsimple@vodafone.de
Add support for HDMI CEC to the drm adv7511/adv7533 drivers.
The CEC registers that we need to use are identical for both drivers,
but they appear at different offsets in the register map.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171007104658.14528-3-hverkuil@xs4all.nl
Initial pull request for DC support. We've completed a substantial amount of
the cleanup and restructuring in our TODO. There are a few additional
cleanups that we are continuing to work on, but I don't think there are any
showstoppers remaining. We've tried to maintain most of the history for bisect
purposes. Harry made sure all the commits build. We've enabled DC for vega10
and Raven. Pre-vega10 parts can be enabled via module parameter (amdgpu.dc=1),
but are not enabled by default at this point until we get further testing
upstream.
This code provides atomic modesetting support for DCE8 (CIK), DCE10 (Tonga,
Fiji), DCE11 (CZ, ST, Polaris), DCE12 (vega10), and DCN1 (RV) including
HDMI and DP audio, DP MST, and many other advanced display features.
+
Latest cleanups for DC from you and Harry. Note that there is some
flickering on some older asics with this branch due to a regression in powerplay
that has already been fixed and will be included in my next non-DC pull request
next week.
* 'drm-next-4.15-dc' of git://people.freedesktop.org/~agd5f/linux: (897 commits)
amdgpu/dc: use kref for dc_state.
amdgpu/dc: convert dc_sink to kref.
amdgpu/dc: convert dc_stream_state to kref.
amdgpu/dc: use kref for dc_plane_state.
amdgpu/dc: convert dc_gamma to kref reference counting.
amdgpu/dc: convert dc_transfer to use a kref.
amdgpu/dc: kill a bunch of dead code.
amdgpu/dc: set a bunch of functions to static.
amdgpu/dc: kill some deadcode in dc core.
amdgpu/dc: fix indentation on a couple of returns.
amdgpu/dm: don't use after free.
amdgpu/dc: kfree already checks for NULL.
amdgpu/dc: fix a bunch of misc whitespace.
amdgpu/dc: drop hw_sequencer_types.h
amdgpu/dc: drop dce110_types.h
amdgpu/dc: use kernel ilog2 for log_2.
amdgpu/dc: don't memset after kzalloc.
amdgpu/dc: inline dal grph object id functions.
amdgpu/dc: inline dml_round_to_multiple
amdgpu/dc: rename bios get_image symbol to something more searchable.
...
More new stuff for 4.15. Highlights:
- Add clock query interface for raven
- Add new FENCE_TO_HANDLE ioctl
- UVD video encode ring support on polaris
- transparent huge page DMA support
- deadlock fixes
- compute pipe lru tweaks
- powerplay cleanups and regression fixes
- fix duplicate symbol issue with radeon and amdgpu
- misc bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (72 commits)
drm/radeon/dp: make radeon_dp_get_dp_link_config static
drm/radeon: move ci_send_msg_to_smc to where it's used
drm/amd/sched: fix deadlock caused by unsignaled fences of deleted jobs
drm/amd/sched: NULL out the s_fence field after run_job
drm/amd/sched: move adding finish callback to amd_sched_job_begin
drm/amd/sched: fix an outdated comment
drm/amd/sched: rename amd_sched_entity_pop_job
drm/amdgpu: minor coding style fix
drm/ttm: add transparent huge page support for DMA allocations v2
drm/ttm: add support for different pool sizes
drm/ttm: remove unsued options from ttm_mem_global_alloc_page
drm/amdgpu: add uvd enc irq
drm/amdgpu: add uvd enc ib test
drm/amdgpu: add uvd enc ring test
drm/amdgpu: add uvd enc vm functions (v2)
drm/amdgpu: add uvd enc into run queue
drm/amdgpu: add uvd enc rings
drm/amdgpu: add new uvd enc ring methods
drm/amdgpu: add uvd enc command in header
drm/amdgpu: add uvd enc registers in header
...
It's not used outside this file any longer.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's used in ci_dpm.c so move it there and make it static.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Highly concurrent Piglit runs can trigger a race condition where a pending
SDMA job on a buffer object is never executed because the corresponding
process is killed (perhaps due to a crash). Since the job's fences were
never signaled, the buffer object was effectively leaked. Worse, the
buffer was stuck wherever it happened to be at the time, possibly in VRAM.
The symptom was user space processes stuck in interruptible waits with
kernel stacks like:
[<ffffffffbc5e6722>] dma_fence_default_wait+0x112/0x250
[<ffffffffbc5e6399>] dma_fence_wait_timeout+0x39/0xf0
[<ffffffffbc5e82d2>] reservation_object_wait_timeout_rcu+0x1c2/0x300
[<ffffffffc03ce56f>] ttm_bo_cleanup_refs_and_unlock+0xff/0x1a0 [ttm]
[<ffffffffc03cf1ea>] ttm_mem_evict_first+0xba/0x1a0 [ttm]
[<ffffffffc03cf611>] ttm_bo_mem_space+0x341/0x4c0 [ttm]
[<ffffffffc03cfc54>] ttm_bo_validate+0xd4/0x150 [ttm]
[<ffffffffc03cffbd>] ttm_bo_init_reserved+0x2ed/0x420 [ttm]
[<ffffffffc042f523>] amdgpu_bo_create_restricted+0x1f3/0x470 [amdgpu]
[<ffffffffc042f9fa>] amdgpu_bo_create+0xda/0x220 [amdgpu]
[<ffffffffc04349ea>] amdgpu_gem_object_create+0xaa/0x140 [amdgpu]
[<ffffffffc0434f97>] amdgpu_gem_create_ioctl+0x97/0x120 [amdgpu]
[<ffffffffc037ddba>] drm_ioctl+0x1fa/0x480 [drm]
[<ffffffffc041904f>] amdgpu_drm_ioctl+0x4f/0x90 [amdgpu]
[<ffffffffbc23db33>] do_vfs_ioctl+0xa3/0x5f0
[<ffffffffbc23e0f9>] SyS_ioctl+0x79/0x90
[<ffffffffbc864ffb>] entry_SYSCALL_64_fastpath+0x1e/0xad
[<ffffffffffffffff>] 0xffffffffffffffff
Note: The correctness of this change depends on the earlier commit
"drm/amd/sched: move adding finish callback to amd_sched_job_begin"
v2: set an error on the finished fence
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd_sched_process_job drops the fence reference, so NULL out the s_fence
field before adding it as a callback to guard against accidentally using
s_fence after it may have be freed.
v2: add a clarifying comment
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The finish callback is responsible for removing the job from the ring
mirror list, among other things. It makes sense to add it as callback
in the place where the job is added to the ring mirror list.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function does not actually remove the job from the FIFO, so "peek"
describes it better.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix two minor 80 char issues.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try to allocate huge pages when it makes sense.
v2: fix comment and use ifdef
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly handle different page sizes in the memory accounting.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
