* Load/attach a BPF program that hooks to file_mprotect (int)
and bprm_committed_creds (void).
* Perform an action that triggers the hook.
* Verify if the audit event was received using the shared global
variables for the process executed.
* Verify if the mprotect returns a -EPERM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-8-kpsingh@chromium.org
This adds a test to exercise the new bpf_map__set_initial_value() function.
The test simply overrides the global data section with all zeroes, and
checks that the new value makes it into the kernel map on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-2-toke@redhat.com
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not have its
events traced. If the event-fork option is enabled, then neither will the
children of that task have its events traced.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not be traced
by the function tracer. If the function-fork option is enabled, then neither
will the children of that task be traced by the function tracer.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Implement the .snapshot region operation for the dummy data region. This
enables a region snapshot to be taken upon request via the new
DEVLINK_CMD_REGION_SNAPSHOT command.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the test checks the observable effect of skbedit priority:
queueing of packets at the correct qdisc band. It therefore misses the fact
that the counters for offloaded rules are not updated. Add an extra check
for the counter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add local header dependency in lib.mk. This enforces the dependency
blindly even when a test doesn't include the file, with the benefit
of a simpler common logic without requiring individual tests to have
special rule for it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix memfd to support relocatable build (O=objdir). This calls out
source files necessary to build tests and simplfies the dependency
enforcement.
Tested the following:
Note that cross-build for fuse_mnt has dependency on -lfuse.
make all
make clean
make kselftest-install O=/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=memfd
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix seccomp relocatable builds. This is a simple fix to use the
right lib.mk variable TEST_GEN_PROGS. Local header dependency
is addressed in a change to lib.mk as a framework change that
enforces the dependency without requiring changes to individual
tests.
The following use-cases work with this change:
In seccomp directory:
make all and make clean
From top level from main Makefile:
make kselftest-install O=objdir ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=seccomp
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a selftest would timeout before, the program would just fall over
and no accounting of failures would be reported (i.e. it would result in
an incomplete TAP report). Instead, add an explicit SIGALRM handler to
cleanly catch and report the timeout.
Before:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
Alarm clock
After:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
timeout.too_long: Test terminated by timeout
[ FAIL ] timeout.too_long
[==========] 1 / 2 tests passed.
[ FAILED ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to better handle timeout failures, rearrange the child waiting
logic into a separate function. This is mostly a copy/paste with an
indentation change. To handle pid tracking, a new field is added for
the child pid. Also move the alarm() pairing into the function.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a missing raw dmesg test log to test the kunit_tool's dmesg parser.
test_prefix_poundsign and test_output_with_prefix_isolated_correctly
fail without this test log.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space
indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to
8-space indentation in line with TAP spec (e.g. see "Subtests"
section of https://node-tap.org/tap-protocol/).
Use these macros in place of one or two tabs in strings to clarify
why we are indenting.
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When DSCP is updated through an offloaded pedit action, DSCP rewrite on
egress should be disabled. Add a test that check that it is so.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that runs packets with dsfield set, and test that pedit adjusts
the DSCP or ECN parts or the whole field.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a copy-paste typo in a comment and error message.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After changes to add update_reg_bounds after ALU ops and adding ALU32
bounds tracking the error message is changed in the 32-bit right shift
tests.
Test "#70/u bounds check after 32-bit right shift with 64-bit input FAIL"
now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
math between map_value pointer and 4294967294 is not allowed
And test "#70/p bounds check after 32-bit right shift with 64-bit input
FAIL" now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
last_idx 11 first_idx 0
regs=2 stack=0 before 10: (14) w1 -= 2
regs=2 stack=0 before 9: (74) w1 >>= 31
regs=2 stack=0 before 8: (67) r1 <<= 31
regs=2 stack=0 before 7: (b7) r1 = 2
math between map_value pointer and 4294967294 is not allowed
Before this series we did not trip the "math between map_value pointer..."
error because check_reg_sane_offset is never called in
adjust_ptr_min_max_vals(). Instead we have a register state that looks
like this at line 11*,
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0))
R1_w=invP(id=0,
smin_value=0,smax_value=4294967295,
umin_value=0,umax_value=4294967295,
var_off=(0xfffffffe; 0x0))
R10=fp(id=0,off=0,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0)) fp-8_w=mmmmmmmm
11: (0f) r0 += r1
In R1 'smin_val != smax_val' yet we have a tnum_const as seen
by 'var_off(0xfffffffe; 0x0))' with a 0x0 mask. So we hit this check
in adjust_ptr_min_max_vals()
if ((known && (smin_val != smax_val || umin_val != umax_val)) ||
smin_val > smax_val || umin_val > umax_val) {
/* Taint dst register if offset had invalid bounds derived from
* e.g. dead branches.
*/
__mark_reg_unknown(env, dst_reg);
return 0;
}
So we don't throw an error here and instead only throw an error
later in the verification when the memory access is made.
The root cause in verifier without alu32 bounds tracking is having
'umin_value = 0' and 'umax_value = U64_MAX' from BPF_SUB which we set
when 'umin_value < umax_val' here,
if (dst_reg->umin_value < umax_val) {
/* Overflow possible, we know nothing */
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else { ...}
Later in adjust_calar_min_max_vals we previously did a
coerce_reg_to_size() which will clamp the U64_MAX to U32_MAX by
truncating to 32bits. But either way without a call to update_reg_bounds
the less precise bounds tracking will fall out of the alu op
verification.
After latest changes we now exit adjust_scalar_min_max_vals with the
more precise umin value, due to zero extension propogating bounds from
alu32 bounds into alu64 bounds and then calling update_reg_bounds.
This then causes the verifier to trigger an earlier error and we get
the error in the output above.
This patch updates tests to reflect new error message.
* I have a local patch to print entire verifier state regardless if we
believe it is a constant so we can get a full picture of the state.
Usually if tnum_is_const() then bounds are also smin=smax, etc. but
this is not always true and is a bit subtle. Being able to see these
states helps understand dataflow imo. Let me know if we want something
similar upstream.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158507161475.15666.3061518385241144063.stgit@john-Precision-5820-Tower
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Find some tests are missed in Makefile by running:
for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework kunit_tool in order to allow .kunitconfig files to better enforce
that disabled items in .kunitconfig are disabled in the generated
.config.
Previously, kunit_tool simply enforced that any line present in
.kunitconfig was also present in .config, but this could cause problems
if a config option was disabled in .kunitconfig, but not listed in .config
due to (for example) having disabled dependencies.
To fix this, re-work the parser to track config names and values, and
require values to match unless they are explicitly disabled with the
"CONFIG_x is not set" comment (or by setting its value to 'n'). Those
"disabled" values will pass validation if omitted from the .config, but
not if they have a different value.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This adds test cases for ptrace deadlocks.
Additionally fixes a compile problem in get_syscall_info.c,
observed with gcc-4.8.4:
get_syscall_info.c: In function 'get_syscall_info':
get_syscall_info.c:93:3: error: 'for' loop initial declarations are only
allowed in C99 mode
for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) {
^
get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile
your code
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
We recently regressed (cf. [1] and its corresponding fix in [2]) returning
ENOMEM when trying to create a process in a pid namespace whose init
process/child subreaper has already died. This has caused confusion at
least once before that (cf. [3]). Let's add a simple regression test to
catch this in the future.
[1]: 49cb2fc42c ("fork: extend clone3() to support setting a PID")
[2]: b26ebfe12f ("pid: Fix error return value in some cases")
[3]: 35f71bc0a0 ("fork: report pid reservation failure properly")
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Some specific tests in powerpc can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run, the following test result was
collected across 2 Power8 nodes and 1 Power9 node in our pool:
powerpc/benchmarks/futex_bench - 52s
powerpc/dscr/dscr_sysfs_test - 116s
powerpc/signal/signal_fuzzer - 88s
powerpc/tm/tm_unavailable_test - 168s
powerpc/tm/tm-poison - 240s
Thus they will fail with TIMEOUT error. Disable the timeout setting
for these sub-tests to allow them finish properly.
https://bugs.launchpad.net/bugs/1864642
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com
The test case tm-signal-context-force-tm expects a segfault to happen
on returning from signal handler, and then does a setcontext() to run
the test again. However, the test doesn't always segfault, causing the
test to run a single time.
This patch fixes the test by putting it within a loop and jumping, via
setcontext, just prior to the loop in case it segfaults. This way we
get the desired behavior (run the test COUNT_MAX times) regardless if
it segfaults or not. This also reduces the use of setcontext for
control flow logic, keeping it only in the segfault handler.
Also, since 'count' is changed within the signal handler, it is
declared as volatile to prevent any compiler optimization getting
confused with asynchronous changes.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-3-gustavold@linux.ibm.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) A new selftest for nf_queue, from Florian Westphal. This test
covers two recent fixes: 07f8e4d0fd ("tcp: also NULL skb->dev
when copy was needed") and b738a185be ("tcp: ensure skb->dev is
NULL before leaving TCP stack").
2) The fwd action breaks with ifb. For safety in next extensions,
make sure the fwd action only runs from ingress until it is extended
to be used from a different hook.
3) The pipapo set type now reports EEXIST in case of subrange overlaps.
Update the rbtree set to validate range overlaps, so far this
validation is only done only from userspace. From Stefano Brivio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case to check nf queue infrastructure.
Could be extended in the future to also cover serialization of
conntrack, uid and secctx attributes in nfqueue.
For now, this checks that 'queue bypass' works, that a queue rule with
no bypass option blocks traffic and that userspace receives the expected
number of packets.
For this we add two queues and hook all of
prerouting/input/forward/output/postrouting.
Packets get queued twice with a dummy base chain in between:
This passes with current nf tree, but reverting
commit 946c0d8e6e ("netfilter: nf_queue: fix reinject verdict handling")
makes this trip (it processes 30 instead of expected 20 packets).
v2: update config file with queue and other options missing/needed for
other tests.
v3: also test with tcp, this reveals problem with commit
28f8bfd1ac ("netfilter: Support iif matches in POSTROUTING"), due to
skb->dev pointing at another skb in the retransmit rbtree (skb->dev
aliases to rbnode child).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull RCU changes from Paul E. McKenney:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kunit.py utility builds an ARCH=um kernel and then runs it. Add
optional --make_options flag to kunit.py allowing for the operator to
specify extra build options.
This allows use of the clang compiler for kunit:
tools/testing/kunit/kunit.py run --defconfig \
--make_options CC=clang --make_options HOSTCC=clang
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To reduce the reliance of trace samples (trace*_user) on bpf_load,
move read_trace_pipe to trace_helpers. By moving this bpf_loader helper
elsewhere, trace functions can be easily migrated to libbbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200321100424.1593964-2-danieltimlee@gmail.com
This patch adds test to exercise the bpf_sk_storage_get()
and bpf_sk_storage_delete() helper from the bpf_dctcp.c.
The setup and check on the sk_storage is done immediately
before and after the connect().
This patch also takes this chance to move the pthread_create()
after the connect() has been done. That will remove the need of
the "wait_thread" label.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200320152107.2169904-1-kafai@fb.com
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d108 ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Statistics on timestamps is useful to quantify average and tail latency.
Print timestamp statistics in count/avg/min/max format.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following new flags:
-e: use level-triggered epoll() instead of poll().
-E: use event-triggered epoll() instead of poll().
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A longer sleep duration between sendmsg()s makes more cachelines to be
evicted and results in higher latency. Making the duration configurable.
Add the following new flags:
-S: Configurable sleep duration.
-b: Busy loop instead of poll().
Remove the following flag:
-D: No delay between packets: subsumed by -S.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Txtimestamp reports latencies in uses resolution, while nsec is needed
in cases such as measuring latencies on localhost.
Add the following new flag:
-N: print timestamps and durations in nsec (instead of usec)
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The wrapper script txtimestamp.sh executes a pre-defined list of testcases
sequentially without configuration options available.
Add an option (-r/--run) to setup the test namespace and pass remaining
arguments to txtimestamp binary. The script still runs all tests when no
argument is passed.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implemented the functionality to run all KUnit tests through kunit_tool
by specifying an --alltests flag, which builds UML with allyesconfig
enabled, and consequently runs every KUnit test. A new function was
added to kunit_kernel: make_allyesconfig.
Firstly, if --alltests is specified, kunit.py triggers build_um_kernel
which call make_allyesconfig. This function calls the make command,
disables the broken configs that would otherwise prevent UML from
building, then starts the kernel with all possible configurations
enabled. All stdout and stderr is sent to test.log and read from there
then fed through kunit_parser to parse the tests to the user. Also added
a signal_handler in case kunit is interrupted while running.
Tested: Run under different conditions such as testing with
--raw_output, testing program interrupt then immediately running kunit
again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, kunit_parser did not properly handle kunit TAP output that
- had any prefixes (generated from different configs e.g.
CONFIG_PRINTK_TIME)
- had unrelated kernel output mixed in the middle of
it, which has shown up when testing with allyesconfig
To remove prefixes, the parser looks for the first line that includes
TAP output, "TAP version 14". It then determines the length of the
string before this sequence, and strips that number of characters off
the beginning of the following lines until the last KUnit output line is
reached.
These fixes have been tested with additional tests in the
KUnitParseTest and their associated logs have also been added.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clang's -Wmisleading-indentation warns about misleading indentations if
there's a mixture of spaces and tabs. Remove extraneous spaces.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200320201510.217169-1-morbo@google.com
Add tests cases for checking the new firmware_request_platform api.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200115163554.101315-7-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
test_vdso would try to call a NULL pointer if the vDSO was missing.
vdso_restorer_32 hit a genuine failure: trying to use the
kernel-provided signal restorer doesn't work if the vDSO is missing.
Skip the test if the vDSO is missing, since the test adds no particular
value in that case.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/618ea7b8c55b10d08b1cb139e9a3a957934b8647.1584653439.git.luto@kernel.org
Add a test that runs traffic through a port such that skbedit priority
action acts on it during forwarding. Test that at egress, it is classified
correctly according to the new priority at a PRIO qdisc.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test triggers a TM Bad Thing by raising a signal in transactional state
and forcing a pagefault to happen in kernelspace when the kernel signal
handling code first touches the user signal stack.
This is inspired by the test tm-signal-context-force-tm but uses userfaultfd to
make the test deterministic. While this test always triggers the bug in one
run, I had to execute tm-signal-context-force-tm several times (the test runs
5000 times each execution) to trigger the same bug.
tm-signal-context-force-tm is kept instead of replaced because, while this test
is more reliable and triggers the same bug, tm-signal-context-force-tm has a
better coverage, in the sense that by running the test several times it might
trigger the pagefault and/or be preempted at different places.
v3: skip test if userfaultfd is unavailable.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-2-gustavold@linux.ibm.com
There's two different paths through the sigreturn code, depending on
whether the VDSO is mapped or not. We recently discovered a bug in the
unmapped case, because it's not commonly used these days.
So add a test that sends itself a signal, then moves the VDSO, takes
another signal and finally unmaps the VDSO before sending itself
another signal. That tests the standard signal path, the code that
handles the VDSO being moved, and also the signal path in the case
where the VDSO is unmapped.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200304110402.6038-1-mpe@ellerman.id.au
The ftrace selftest "ftrace - test for function traceon/off triggers"
enables all events and reads the trace file. Now that the trace file does
not disable tracing, and will attempt to continually read new data that is
added, the selftest gets stuck reading the trace file. This is because the
data added to the trace file will fill up quicker than the reading of it.
By only enabling scheduling events, the read can keep up with the writes.
Instead of enabling all events, only enable the scheduler events.
Link: http://lkml.kernel.org/r/20200318111345.0516642e@gandalf.local.home
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This adds a stress test that should hopefully help us catch regressions
for [1], [2], and [3].
[1]: 2669b8b0c7 ("binder: prevent UAF for binderfs devices")
[2]: f0fe2c0f05 ("binder: prevent UAF for binderfs devices II")
[3]: 211b64e4b5 ("binderfs: use refcount for binder control devices too")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-3-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unprivileged users will be able to create directories in there. The
unprivileged test for /dev wouldn't have worked on most systems.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-2-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makes for nicer output and prepares for additional tests.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-1-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We precompute the static-static ECDH during configuration time, in order
to save an expensive computation later when receiving network packets.
However, not all ECDH computations yield a contributory result. Prior,
we were just not letting those peers be added to the interface. However,
this creates a strange inconsistency, since it was still possible to add
other weird points, like a valid public key plus a low-order point, and,
like points that result in zeros, a handshake would not complete. In
order to make the behavior more uniform and less surprising, simply
allow all peers to be added. Then, we'll error out later when doing the
crypto if there's an issue. This also adds more separation between the
crypto layer and the configuration layer.
Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case this helps expose bugs with the newer 64-bit time_t types, we do
our testing with the newer musl that supports this as well as
CONFIG_COMPAT_32BIT_TIME=n. This matters to us, since wireguard does in
fact deal with timestamps.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit removes a duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for mlxsw hw_stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the change that made the code to query counter bank size from device
instead of using hard-coded value, the number of available counters
changed for Spectrum-2. Adjust the limit in the selftests.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The steal_time test's timespec stop condition was wrong and should have
used the timespec functions instead to avoid being wrong, but
timespec_diff had a strange interface. Rework all the timespec API and
its use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests and sub-tests are setting "custom" thread/process affinity and
don't reset it back. Instead of requiring each test to undo all this, ensure
that thread affinity is restored by test_progs test runner itself.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-3-andriin@fb.com
When specifying disjoint set of tests, test_progs doesn't set skipped test's
array elements to false. This leads to spurious execution of tests that should
have been skipped. Fix it by explicitly initializing them to false.
Fixes: 3a516a0a3a ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-2-andriin@fb.com
Previous attempt to make tcp_rtt more robust introduced a new race, in which
server_done might be set to true before server can actually accept any
connection. Fix this by unconditionally waiting for accept(). Given socket is
non-blocking, if there are any problems with client side, it should eventually
close listening FD and let server thread exit with failure.
Fixes: 4cd729fa02 ("selftests/bpf: Make tcp_rtt test more robust to failures")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-1-andriin@fb.com
Amazingly, some libc implementations don't call __NR_nanosleep syscall from
their nanosleep() APIs. Hammer it down with explicit syscall() call and never
get back to it again. Also simplify code for timespec initialization.
I verified that nanosleep is called w/ printk and in exactly same Linux image
that is used in Travis CI. So it should both sleep and call correct syscall.
v1->v2:
- math is too hard, fix usec -> nsec convertion (Martin);
- test_vmlinux has explicit nanosleep() call, convert that one as well.
Fixes: 4e1fd25d19 ("selftests/bpf: Fix usleep() implementation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314002743.3782677-1-andriin@fb.com
Remove unused len variable, which causes compilation warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314001834.3727680-1-andriin@fb.com
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x6Hn
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
Check that guest doesn't hang when an invalid eVMCS GPA is specified.
Testing that #UD is injected would probably be better but selftests lack
the infrastructure currently.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that VMfailInvalid happens when eVMCS revision is is invalid.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM allows to use revision_id from MSR_IA32_VMX_BASIC as eVMCS revision_id
to workaround a bug in genuine Hyper-V (see the comment in
nested_vmx_handle_enlightened_vmptrld()), this shouldn't be used by
default. Switch to using KVM_EVMCS_VERSION(1).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Changed all tests and utilities to use TEST_FAIL macro
instead of TEST_ASSERT(false,...).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests/utilities use the TEST_ASSERT(false, ...) pattern to
indicate a failure and stop execution.
This change introduces the TEST_FAIL macro which is a wrap around
TEST_ASSERT(false, ...) and so provides a direct alternative for
failing a test.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normal reset and initial CPU reset do not clear all registers. Add a
test that those registers are NOT changed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not only test the oneregs or the get_(x)regs interfaces but
also the sync_regs. Those are usually the canonical place for register
content.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest crashes very early due to changes in the control registers
used by dynamic address translation. Let us use different registers
that will not crash the guest.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The steal-time test confirms what is reported to the guest as stolen
time is consistent with the run_delay reported for the VCPU thread
on the host. Both x86_64 and AArch64 have the concept of steal/stolen
time so this test is introduced for both architectures.
While adding the test we ensure .gitignore has all tests listed
(it was missing s390x/resets) and that the Makefile has all tests
listed in alphabetical order (not really necessary, but it almost
was already...). We also extend the common API with a new num-guest-
pages call and a new timespec call.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also correct the comment and prototype for vm_create_default(),
as it takes a number of pages, not a size.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the format attribute to enable printf format warnings, and
then fix them all.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acrs are 32 bit and not 64 bit.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
value is u64 and not string.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move function documentation comment blocks to the header files in
order to avoid duplicating them for each architecture. While at
it clean up and fix up the comment blocks.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add svm_vmcall_test to gitignore list, and realphabetize it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390 requires 1M aligned guest sizes. Embedding the rounding in
vm_adjust_num_guest_pages() allows us to remove it from a few
other places.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced, tweak the
clear_dirty_log_test to use it.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TEST_ASSERT in x86_64/platform_info_test.c would have print 'ucall'
instead of 'uc.cmd'. Also fix all uc.cmd format types.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM selftest to test moving the base gfn of a userspace memory
region. Although the basic concept of moving memory regions is not x86
specific, the assumptions regarding large pages and MMIO shenanigans
used to verify the correctness make this x86_64 only for the time being.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We leave some printf's because they inform the user the test is being
skipped. QUIET should not disable those. We also leave the printf's
used for help text.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were a few problems with the way we output "debug" messages.
The first is that we used DEBUG() which is defined when NDEBUG is
not defined, but NDEBUG will never be defined for kselftests
because it relies too much on assert(). The next is that most
of the DEBUG() messages were actually "info" messages, which
users may want to turn off if they just want a silent test that
either completes or asserts. Finally, a debug message output from
a library function, and thus for all tests, was annoying when its
information wasn't interesting for a test.
Rework these messages so debug messages only output when DEBUG
is defined and info messages output unless QUIET is defined.
Also name the functions pr_debug and pr_info and make sure that
when they're disabled we eat all the inputs. The later avoids
unused variable warnings when the variables were only defined
for the purpose of printing.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to quantify demand paging performance, time guest execution
during demand paging.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Move timespec-diff to test_util.h]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most VMs have multiple vCPUs, the concurrent execution of which has a
substantial impact on demand paging performance. Add an option to create
multiple vCPUs to each access disjoint regions of memory.
Signed-off-by: Ben Gardon <bgardon@google.com>
[guest_code() can't return, use GUEST_ASSERT(). Ensure the number
of guests pages is compatible with the host.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vcpu_args_set is only implemented for x86. This makes writing
tests with multiple vCPUs difficult as each guest vCPU must either a.)
do the same thing or b.) derive some kind of unique token from it's
registers or the architecture. To simplify the process of writing tests
with multiple vCPUs for s390 and aarch64, add set args functions for
those architectures.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Fixed array index (num => i) and made some style changes.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for supporting multiple vCPUs in the demand paging test,
pass arguments to the vCPU in a consolidated global struct instead of
syncing multiple globals.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to allow the demand paging test to work on larger and
smaller guest sizes.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Rewrote parse_size() to simplify and provide user more flexibility as
to how sizes are input. Also fixed size overflow assert.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running the demand paging test with the -u option, the User Fault
FD handler essentially adds an arbitrary delay to page fault resolution.
To enable better simulation of a real demand paging scenario, add a
configurable delay to the UFFD handler.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The demand paging test is currently a simple page access test which, while
potentially useful, doesn't add much versus the existing dirty logging
test. To improve the demand paging test, add a basic userfaultfd demand
paging implementation.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extend RED testsuite to cover the new nodrop mode of RED-ECN. This test is
really similar to ECN test, diverging only in the last step, where UDP
traffic should go to backlog instead of being dropped. Thus extract a
common helper, ecn_test_common(), make do_ecn_test() into a relatively
simple wrapper, and add another one, do_ecn_nodrop_test().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
