Add support for HDA BE DAIs in SKL platform driver.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When no I2S based codec entries are found in the BIOS, check if there are
any HDA codecs detected on the bus. Based on the number of codecs found
take appropriate action in machine driver. If there are two HDA codecs
i.e. iDisp + HDA found on the bus, register DAIs and DAI links for both.
If only one codec i.e. iDisp is found then load only iDisp machine driver.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add machine driver for Intel platforms (SKL/KBL/BXT/APL) with
HDA and iDisp codecs. This patch adds support for only iDisp (HDMI/DP)
codec. In the following patches support for HDA codecs will be added.
This should work for other Intel platforms as well e.g. GLK,CNL
however this series is not tested on all the platforms.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose a table containing machine driver information for HDAudio-based
platforms handled by ASoC on Intel hardware.
We only set constant values that are valid across multiple
platforms. The firmware name used by the DSP will be set dynamically
for each platform.
The table is made of a single entry for now, if we need more
complicated set-up where HDAudio is mixed with ACPI-enumerated devices
(I2C, SoundWire) then we'd expect the differentiation to be handled
through information provided by the BIOS (as done for KBL
Chromebooks).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Also add these typos to spelling.txt so checkpatch.pl will look for them.
Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cold reboot stress test found that the hda irq could access rirb ring
buffer before its memory gets allocated which resulting in null
pointer dereference inside snd_hdac_bus_update_rirb().
Fix it by moving the skl_acquire_irq after ring buffer allocation.
While here, also change err return from -EBUSY to actual error code.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks to select the right input-map, jack-detect pin, etc. for:
Linx Linx7 tablet
Onda V975w tablet
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As sparse warns, the PCM format type can't be dealt as integer as
found in Intel SST driver codes.
Fix them in the following two ways:
- The open code with snd_mask_set() and params->masks reference is
replaced with params_set_format()
- The rest codes with snd_mask_set(fmt, SNDRV_PCM_FORMAT_XXX) are
replaced with the new helper, snd_mask_set_format().
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
include DAPM Mux and output widgets into the list.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This looks like a copy/paste issue, but clearly there is an inversion
that is obvious when checking the arguments.
Detected with Sparse - now that we have fewer warnings this one was
easy to find.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code and add relevant casts to make Sparse warnings go away
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sst_dma_new and sst_dma_free are not used in any other file and don't
have a prototype. Move to static functions and remove
EXPORT_SYMBOL_GPL statement.
Reported by sparse warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure definitions are consistent with usage.
Detected with Sparse.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all Sparse warnings go away by using le16/32_to_cpu.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the "Connect Tablet 9" tablet, this tablet has a
mono-speaker. Otherwise it works fine with the defaults.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirk table entries for the following tablets:
ITWorks TW701
Ployer Momo7w
Trekstor win7
Yours 8"
These all use the default settings, except that they only have a single
speaker and thus need the mono-speaker quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
During my initial round of bytcr_rt5651 long-name patches I did not include
a difference for mono vs stereo speaker setups in the longname because it
seems that all 5651 devices with only a single speaker do some mixing of
left + right on the PCB.
However further testing has shown that while this works great when only
playing audio on the left or right channel, the output becomes garbled
when using both channels at once. Something which does not happen when
using the Stereo DAC MIXL / MIXR switches to mix the channels together
inside the codec and then only outputting on a single channel.
So we need to have separate UCM profiles and thus separate long-names
for devices with a mono speaker vs stereo speakers. Just as we already
have for the bytcr_rt5640 case.
This commit adds a new BYT_RT5651_MONO_SPEAKER quirk and adds "stereo-spk"
or "mono-spk" to the long-name based on this and enables this mapping on
devices with a mono speaker.
Changing the long-name like this is ok for now, since I'm still working
on the UCM profiles, so they are not in upstream alsa-lib yet.
This brings the long-name naming scheme fully in sync with the bytcr_rt5640
case, which is good from a consistency pov.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
During the recent cleanup series 3 of the 6 input mappings where removed
from the bytcr_rt5651 machine driver because testing showed that none of
them were used.
However some devices do actually have their internal mic on IN2 (and
only IN2, not IN1 and IN2), this did not show during previous tests
due to a bug in the userspace UCM input device switching code.
This commit re-adds the IN2 mapping for devices with the internal mic.
on IN2 and the headser mic on IN3 and enables this mapping on devices
with their internal mic on IN2.
This commit also changes the default internal mic input to IN2, because
all my 7 test devices have their mic there.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With the default over current detect limit of 1500uA headsets on often
get detected as headphones on the VIOS LTH17 and even when detected as
headset the OVCD current triggers often while plugged in, resulting in
false-positive button press detection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, other
boards may have I2cSerialBusV2, GpioInt, GpioIo instead. We want the
GpioIo one for the ext-amp-enable-gpio.
So far we've been assuming that the GpioIo one always comes first, this
commit adds code to detect which one comes first and to add the right
gpio-mapping.
This fixes sound not working on the Vios LTH17 laptop.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable reporting of button presses now that the codec driver recently has
gotten support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable jack-detection and thus the codec IRQ over suspend/resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5651 does not have a built-in speaker amplifier, so it is often
used together with an external amplifier. On Cherry Trail boards this
external amplifier's enable pin is driven through a GPIO, which is
given as the first GPIO in the ACPI resources of the codec fwnode.
This commit adds support to the bytcr_rt5651 for this GPIO, fixing
the speaker not working on CHT devices with a rt5651 codec.
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the getting of the codec_dev, to add device-props to it, out of
byt_rt5651_add_codec_device_props() and into its caller,
snd_byt_rt5651_mc_probe().
This is a preparation patch for adding support for an external amplifier
enable GPIO, which requires further accesses to the codec_dev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove is_valleyview helper, this is not necessary, we can simply call
x86_match_cpu() directly instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk for the Lenovo Miix2 8 tablet, this tablet uses a digital
mic on DMIC1 and has a mono-speaker. The jack-detect uses the default
settings..
Reported-and-tested-by: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library
ops to reuse the legacy HDA codec drivers with ASoC framework.
Extended ops are used by the legacy codec drivers to call into
hdac_hda library, in the subsequent patches..
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove memory allocation within snd_hdac_ext_bus_device_init, to make
its behaviour identical to snd_hdac_bus_device_init. So that caller
can allocate the parent data structure containing hdac_device.
This API change helps in reusing the legacy HDA codec drivers with
ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the hdac_ext_bus structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.
Follow-up patches in this series handle the driver definition.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As we get more entries in the DMI quirk table it is nice to have some
sort of ordering in the table, sort it alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
One some models (Chuwi Vi8 Plus, Chuwi Hi8 Pro) the headphone output has
left and right swapped. This can be fixed in with special mixer settings
in the UCM profile, bit this requires these devices loading a different
UCM profile.
This commit adds a BYT_RT5651_HP_LR_SWAPPED quirk for this and postfixes
the longname with "-hp-swapped" if set, so that a different UCM profile
will be loaded.
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the headset-mic is always IN3 there is no reason to have
the headset-mic mapping in the long-name.
This commit simplifies the long name to "bytcr-rt5651-<intmic-map>-mic".
We can safely do this without causing regressions (UCM profile not found
due to the longname change) as the UCM profiles are not in upstream
alsa-lib yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset
mic. In retrospect this is not correct as all known boards have the headset
mic on IN3.
This commit fixes the original DMIC mapping to correctly have the headset
mic on IN3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset
mic. In retrospect this is not correct as all known boards have the headset
mic on IN3. To workaround this special IN?_HS_IN3 mappings were added.
This commit fixes the original IN1 mapping to correctly have the headset
mic on IN3, moves all users of the IN1_HS_IN3 mapping over to the fixed
IN1_MAP and drops the now no longer needed IN1_HS_IN3 mapping.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
BYT_RT5651_IN2_MAP was introduced in commit 39712db878 ("SoC: intel: byt:
Introduce new custom IN2 map"), uses in commit 2fe30129b0 ("ASoC: intel:
byt: Enable IN2 map quirk for a KIANO laptop"), only to be replaced by a
new BYT_RT5651_IN1_IN2_MAP quirk in commit ea261bd02a ("ASoC: intel:
byt: Introduce new map for dual mics") quickly afterwards, because the
KIANO laptop has 2 internal mics on IN1 and IN2 and the headset mic is
not in IN1 where the BYT_RT5651_IN2_MAP maps it, but on IN3.
Now that the KIANO quirk entry uses BYT_RT5651_IN1_IN2_MAP, there are no
users of BYT_RT5651_IN2_MAP left. This makes sense since the headset mic
seems to always be connected to IN3, so BYT_RT5651_IN2_MAP is not useful.
To deal with BYT_RT5651_IN2_MAP wrongly mapping the headset mic to IN1,
BYT_RT5651_IN2_HS_IN3_MAP was added in commit f026e06317 ("ASoC: Intel:
bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it"). This
was based on the assumption then some devices have the internal mic
connected to IN2 only. Further testing has shown that this is wrong and the
internal mic is always connected to IN1 and sometimes to both IN1 and IN2.
TL;DR: Both BYT_RT5651_IN2_MAP and BYT_RT5651_IN2_HS_IN3_MAP are based on
on wrong assumptions from the past and are no longer useful now, so they
can both be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the quirk logging code not logging the IN1_IN2_MAP quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Further testing on all 6 model x86 tablets with a rt5651 which I have
access to for testing has shown that their single (mono) microphone is
connected to both IN1 *and* IN2.
The previous default mapping of IN2 was based on testing on the same 6
tablets, where the internal mic works fine with a mapping of IN2. But it
works fine too with a mapping of IN1.
This commit changes the default input mapping to to use IN1 instead of
IN2, to match the mapping used for the other mono devices in the DMI quirk
table. So that we need less different mappings.
The same change is made to the Chuwi Vi8 Plus quirks, which is one of the
6 models tested.
This is a preparation patch for simplifying the maps in a follow-up commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Almost all boards use the mclk and use the same jack-detect settings, add
a BYT_RT5651_DEFAULT_QUIRKS define for this.
This shaves of some lines and makes it easier to see which settings are
unique to a certain model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Somehow I missed the Nau8824 support which was added in 4.17. Oops
Fixes: 4f722a6a73 ("ASoC: Intel: common: rename 'reef' to 'sof' in ACPI matching table")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Align with firmware tools, no functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two commercially-available Broadwell platforms based on I2S
(Dell XPS13 and 'Samus' Pixel 2015 Chromebook).
Fix a copy/paste issue to allow each platform to enable different
features if needed when SOF is enabled
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While we are at it, add entries for machine drivers that are used on
SOF-based platforms. The drivers will be submitted upstream after the
core SOF patches, but there's no harm in adding these references now.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change for Skylake driver, add relevant names needed
by SOF for BXT/APL, GLK and CNL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just move to common tables to make it easier
to deal with SOF and share the same machine drivers - as done
previously for BYT/CHT/HSW/BDW.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to deal with DMICs if the DSP is not present and
there is no ACPI machine ID found.
Simplify before moving these ACPI tables to sound/soc/intel/common
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
