Now that we have proper root ref counting everywhere we can kill the
subvol_srcu.
* removal of fs_info::subvol_srcu reduces size of fs_info by 1176 bytes
* the refcount_t used for the references checks for accidental 0->1
in cases where the root lifetime would not be properly protected
* there's a leak detector for roots to catch unfreed roots at umount
time
* SRCU served us well over the years but is was not a proper
synchronization mechanism for some cases
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
I'm going to make the entire destruction of btrfs_root's controlled by
their refcount, so it will be helpful to notice if we're leaking their
eb's on umount.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Getting the end offset for a file extent item requires a bit of code since
the extent can be either inline or regular/prealloc. There are some places
all over the code base that open code this logic and in another patch
later in this series it will be needed again. Therefore encapsulate this
logic in a helper function and use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used following 30d40577e3 ("btrfs: reloc: Also queue
orphan reloc tree for cleanup to avoid BUG_ON()"), so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new error injection point, should_cancel_balance().
It's just a wrapper of atomic_read(&fs_info->balance_cancel_req), but
allows us to override the return value.
Currently there are only one locations using this function:
- btrfs_balance()
It checks cancel before each block group.
There are other locations checking fs_info->balance_cancel_req, but they
are not used as an indicator to exit, so there is no need to use the
wrapper.
But there will be more locations coming, and some locations can cause
kernel panic if not handled properly. So introduce this error injection
to provide better test interface.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reflink code is quite large and has been living in ioctl.c since ever.
It has grown over the years after many bug fixes and improvements, and
since I'm planning on making some further improvements on it, it's time
to get it better organized by moving into its own file, reflink.c
(similar to what xfs does for example).
This change only moves the code out of ioctl.c into the new file, it
doesn't do any other change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass extent buffer start and length so the extent buffer
itself should work fine.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_header_chunk_tree_uuid follows naming convention of
other struct accessors but does something compeletly different. As the
offsetof calculation is clear in the context of extent buffer operations
we can remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_header_fsid follows naming convention of other struct
accessors but does something compeletly different. As the offsetof
calculation is clear in the context of extent buffer operations we can
remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch removes all haphazard code implementing nocow writers
exclusion from pending snapshot creation and switches to using the drew
lock to ensure this invariant still holds.
'Readers' are snapshot creators from create_snapshot and 'writers' are
nocow writers from buffered write path or btrfs_setsize. This locking
scheme allows for multiple snapshots to happen while any nocow writers
are blocked, since writes to page cache in the nocow path will make
snapshots inconsistent.
So for performance reasons we'd like to have the ability to run multiple
concurrent snapshots and also favors readers in this case. And in case
there aren't pending snapshots (which will be the majority of the cases)
we rely on the percpu's writers counter to avoid cacheline contention.
The main gain from using the drew lock is it's now a lot easier to
reason about the guarantees of the locking scheme and whether there is
some silent breakage lurking.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A (D)ouble (R)eader (W)riter (E)xclustion lock is a locking primitive
that allows to have multiple readers or multiple writers but not
multiple readers and writers holding it concurrently.
The code is factored out from the existing open-coded locking scheme
used to exclude pending snapshots from nocow writers and vice-versa.
Current implementation actually favors Readers (that is snapshot
creaters) to writers (nocow writers of the filesystem).
The API provides lock/unlock/trylock for reads and writes.
Formal specification for TLA+ provided by Valentin Schneider is at
https://lore.kernel.org/linux-btrfs/2dcaf81c-f0d3-409e-cb29-733d8b3b4cc9@arm.com/
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The functions will be used outside of export.c and super.c to allow
resolving subvolume name from a given id, eg. for subvolume deletion by
id ioctl.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ split from the next patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_uuid_tree_iterate is called from only once place and its 2nd
argument is always btrfs_check_uuid_tree_entry. Simplify
btrfs_uuid_tree_iterate's signature by removing its 2nd argument and
directly calling btrfs_check_uuid_tree_entry. Also move the latter into
uuid-tree.h. No functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit flips the switch to start tracking/processing pinned extents
on a per-transaction basis. It mostly replaces all references from
btrfs_fs_info::(pinned_extents|freed_extents[]) to
btrfs_transaction::pinned_extents.
Two notable modifications that warrant explicit mention are changing
clean_pinned_extents to get a reference to the previously running
transaction. The other one is removal of call to
btrfs_destroy_pinned_extent since transactions are going to be cleaned
in btrfs_cleanup_one_transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparation for refactoring pinned extents tracking.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_pin_reserved_extent is now only called with a valid transaction so
exploit the fact to take a transaction. This is preparation for tracking
pinned extents on a per-transaction basis.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparation for switching pinned extent tracking to a per-transaction
basis.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're going to start relying on getting ref counting right for
roots, add a list to track allocated roots and print out any roots that
aren't freed up at free_fs_info time.
Hide this behind CONFIG_BTRFS_DEBUG because this will just be used for
developers to verify they aren't breaking things.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're going to start freeing roots and doing other complicated things in
free_fs_info, so we need to move it to disk-io.c and export it in order
to use things lik btrfs_put_fs_root().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to keep track of where we have file extents on disk, and thus
where it is safe to adjust the i_size to, we need to have a tree in
place to keep track of the contiguous areas we have file extents for.
Add helpers to use this tree, as it's not required for NO_HOLES file
systems. We will use this by setting DIRTY for areas we know we have
file extent item's set, and clearing it when we remove file extent items
for truncation.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a race between adding and removing elements to the tree mod log
list and rbtree that can lead to use-after-free problems.
Consider the following example that explains how/why the problems happens:
1) Task A has mod log element with sequence number 200. It currently is
the only element in the mod log list;
2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to
access the tree mod log. When it enters the function, it initializes
'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock'
before checking if there are other elements in the mod seq list.
Since the list it empty, 'min_seq' remains set to (u64)-1. Then it
unlocks the lock 'tree_mod_seq_lock';
3) Before task A acquires the lock 'tree_mod_log_lock', task B adds
itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a
sequence number of 201;
4) Some other task, name it task C, modifies a btree and because there
elements in the mod seq list, it adds a tree mod elem to the tree
mod log rbtree. That node added to the mod log rbtree is assigned
a sequence number of 202;
5) Task B, which is doing fiemap and resolving indirect back references,
calls btrfs get_old_root(), with 'time_seq' == 201, which in turn
calls tree_mod_log_search() - the search returns the mod log node
from the rbtree with sequence number 202, created by task C;
6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating
the mod log rbtree and finds the node with sequence number 202. Since
202 is less than the previously computed 'min_seq', (u64)-1, it
removes the node and frees it;
7) Task B still has a pointer to the node with sequence number 202, and
it dereferences the pointer itself and through the call to
__tree_mod_log_rewind(), resulting in a use-after-free problem.
This issue can be triggered sporadically with the test case generic/561
from fstests, and it happens more frequently with a higher number of
duperemove processes. When it happens to me, it either freezes the VM or
it produces a trace like the following before crashing:
[ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1
[ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 1245.321287] RIP: 0010:rb_next+0x16/0x50
[ 1245.321307] Code: ....
[ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202
[ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b
[ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80
[ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000
[ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038
[ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8
[ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000
[ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0
[ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1245.321706] Call Trace:
[ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs]
[ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs]
[ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs]
[ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs]
[ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs]
[ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs]
[ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs]
[ 1245.322066] do_vfs_ioctl+0x45a/0x750
[ 1245.322081] ksys_ioctl+0x70/0x80
[ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1245.322113] __x64_sys_ioctl+0x16/0x20
[ 1245.322126] do_syscall_64+0x5c/0x280
[ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1245.322155] RIP: 0033:0x7fdee3942dd7
[ 1245.322177] Code: ....
[ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7
[ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004
[ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44
[ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48
[ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50
[ 1245.322423] Modules linked in: ....
[ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]---
Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum
sequence number and iterates the rbtree while holding the lock
'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock'
lock, since it is now redundant.
Fixes: bd989ba359 ("Btrfs: add tree modification log functions")
Fixes: 097b8a7c9e ("Btrfs: join tree mod log code with the code holding back delayed refs")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a report where objtool detects unreachable instructions, eg.:
fs/btrfs/ctree.o: warning: objtool: btrfs_search_slot()+0x2d4: unreachable instruction
This seems to be a false positive due to compiler version. The cause is
in the ASSERT macro implementation that does the conditional check as
IS_DEFINED(CONFIG_BTRFS_ASSERT) and not an #ifdef.
To avoid that, use the ifdefs directly.
There are still 2 reports that aren't fixed:
fs/btrfs/extent_io.o: warning: objtool: __set_extent_bit()+0x71f: unreachable instruction
fs/btrfs/relocation.o: warning: objtool: find_data_references()+0x4e0: unreachable instruction
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of how much we are discarding and how often we are reusing
with async discard. The discard_*_bytes values don't need any special
protection because the work item provides the single threaded access.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Non-block group destruction discarding currently only had a single list
with no minimum discard length. This can lead to caravaning more
meaningful discards behind a heavily fragmented block group.
This adds support for multiple lists with minimum discard lengths to
prevent the caravan effect. We promote block groups back up when we
exceed the BTRFS_ASYNC_DISCARD_MAX_FILTER size, currently we support
only 2 lists with filters of 1MB and 32KB respectively.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Expose max_discard_size as a tunable via sysfs and switch the current
fixed maximum to the default value.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Provide the ability to rate limit based on kbps in addition to iops as
additional guides for the target discard rate. The delay used ends up
being max(kbps_delay, iops_delay).
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An earlier patch keeps track of discardable_extents. These are
undiscarded extents managed by the free space cache. Here, we will use
this to dynamically calculate the discard delay interval.
There are 3 rate to consider. The first is the target convergence rate,
the rate to discard all discardable_extents over the
BTRFS_DISCARD_TARGET_MSEC time frame. This is clamped by the lower
limit, the iops limit or BTRFS_DISCARD_MIN_DELAY (1ms), and the upper
limit, BTRFS_DISCARD_MAX_DELAY (1s). We reevaluate this delay every
transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of this metric so that we can understand how ahead or behind
we are in discarding rate. This uses the same accounting method as
discardable_extents, deltas between previous/current values and
propagating them up.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The number of discardable extents will serve as the rate limiting metric
for how often we should discard. This keeps track of discardable extents
in the free space caches by maintaining deltas and propagating them to
the global count.
The deltas are calculated from 2 values stored in PREV and CURR entries,
then propagated up to the global discard ctl. The current counter value
becomes the previous counter value after update.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Setup base sysfs directory for discard stats + tunables.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only allowed attributes to be exposed in debug/. Let's let other
groups be created by making debug its own kobject.
This also makes the per-fs debug options separate from the global
features mount attributes. This seems to be needed as
sysfs_create_files() requires const struct attribute * while
sysfs_create_group() can take struct attribute *. This seems nicer as
per file system, you'll probably use to_fs_info().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
block_group removal is a little tricky. It can race with the extent
allocator, the cleaner thread, and balancing. The current path is for a
block_group to be added to the unused_bgs list. Then, when the cleaner
thread comes around, it starts a transaction and then proceeds with
removing the block_group. Extents that are pinned are subsequently
removed from the pinned trees and then eventually a discard is issued
for the entire block_group.
Async discard introduces another player into the game, the discard
workqueue. While it has none of the racing issues, the new problem is
ensuring we don't leave free space untrimmed prior to forgetting the
block_group. This is handled by placing fully free block_groups on a
separate discard queue. This is necessary to maintain discarding order
as in the future we will slowly trim even fully free block_groups. The
ordering helps us make progress on the same block_group rather than say
the last fully freed block_group or needing to search through the fully
freed block groups at the beginning of a list and insert after.
The new order of events is a fully freed block group gets placed on the
unused discard queue first. Once it's processed, it will be placed on
the unusued_bgs list and then the original sequence of events will
happen, just without the final whole block_group discard.
The mount flags can change when processing unused_bgs, so when flipping
from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the
discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt
free block groups on the discard_list to the unused_bg queue which will
do the final discard for us.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When discard is enabled, everytime a pinned extent is released back to
the block_group's free space cache, a discard is issued for the extent.
This is an overeager approach when it comes to discarding and helping
the SSD maintain enough free space to prevent severe garbage collection
situations.
This adds the beginning of async discard. Instead of issuing a discard
prior to returning it to the free space, it is just marked as untrimmed.
The block_group is then added to a LRU which then feeds into a workqueue
to issue discards at a much slower rate. Full discarding of unused block
groups is still done and will be addressed in a future patch of the
series.
For now, we don't persist the discard state of extents and bitmaps.
Therefore, our failure recovery mode will be to consider extents
untrimmed. This lets us handle failure and unmounting as one in the
same.
On a number of Facebook webservers, I collected data every minute
accounting the time we spent in btrfs_finish_extent_commit() (col. 1)
and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit()
is where we discard extents synchronously before returning them to the
free space cache.
discard=sync:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
---------------------------------------------------------------
Drive A | 434 | 1170
Drive B | 880 | 2330
Drive C | 2943 | 3920
Drive D | 4763 | 5701
discard=async:
p99 total per minute p99 total per minute
Drive | extent_commit() (ms) | commit_trans() (ms)
--------------------------------------------------------------
Drive A | 134 | 956
Drive B | 64 | 1972
Drive C | 59 | 1032
Drive D | 62 | 1200
While it's not great that the stats are cumulative over 1m, all of these
servers are running the same workload and and the delta between the two
are substantial. We are spending significantly less time in
btrfs_finish_extent_commit() which is responsible for discarding.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This series introduces async discard which will use the flag
DISCARD_ASYNC, so rename the original flag to DISCARD_SYNC as it is
synchronously done in transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We only pass this as 1 from __extent_writepage_io(). The parameter
basically means "pretend I didn't pass in a page". This is silly since
we can simply not pass in the page. Get rid of the parameter from
btrfs_get_extent(), and since it's used as a get_extent_t callback,
remove it from get_extent_t and btree_get_extent(), neither of which
need it.
While we're here, let's document btrfs_get_extent().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can encode this in the offset parameter: -1 means use the page
offsets, anything else is a valid offset.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we have two wrappers for __btrfs_lookup_bio_sums():
btrfs_lookup_bio_sums_dio(), which is used for direct I/O, and
btrfs_lookup_bio_sums(), which is used everywhere else. The only
difference is that the _dio variant looks up csums starting at the given
offset instead of using the page index, which isn't actually direct
I/O-specific. Let's clean up the signature and return value of
__btrfs_lookup_bio_sums(), rename it to btrfs_lookup_bio_sums(), and get
rid of the trivial helpers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_free_reserved_extent now performs the actions of
btrfs_free_and_pin_reserved_extent. But this name is a bit of a
misnomer, since the extent is not really freed but just pinned. Reflect
this in the new name. No semantics changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr 13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
range start 13631488 end 14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
range start 13959168 end 14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr 13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr 13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from 13959168
(13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset 13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 4 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.
The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.
The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.
Signed-off-by: David Sterba <dsterba@suse.com>
Accessors defined by BTRFS_SETGET_FUNCS take a raw extent buffer and
manipulate the items there, there's no special prefix required. The
block group accessors had _disk_ because previously the names were
occupied by the on-stack accessors. As this has been addressed in the
previous patch, we can now unify the naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All accessors defined by BTRFS_SETGET_STACK_FUNCS contain _stack_ in the
name, the block group ones were not following that scheme, so let's
switch them.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently all the checksum algorithms generate a fixed size digest size
and we use it. The on-disk format can hold up to BTRFS_CSUM_SIZE bytes
and BLAKE2b produces digest of 512 bits by default. We can't do that and
will use the blake2b-256, this needs to be passed to the crypto API.
Separate that from the base algorithm name and add a member to request
specific driver, in this case with the digest size.
The only place that uses the driver name is the crypto API setup.
Signed-off-by: David Sterba <dsterba@suse.com>
Export supported checksum algorithms via sysfs in the list of static
features:
/sys/fs/btrfs/features/supported_checksums
Space spearated list of checksum algorithm names.
Co-developed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not using btrfs_schedule_bio() anymore, delete all the
code that supported it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute is more relaxed than const and the functions could
dereference pointers, as long as the observable state is not changed. We
do have such functions, based on -Wsuggest-attribute=pure .
The visible effects of this patch are negligible, there are differences
in the assembly but hard to summarize.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason the attribute is called __attribute_const__ and not
__const, marks functions that have no observable effects on program
state, IOW not reading pointers, just the arguments and calculating a
value. Allows the compiler to do some optimizations, based on
-Wsuggest-attribute=const . The effects are rather small, though, about
60 bytes decrese of btrfs.ko.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
