arch/x86/kernel/apic/es7000_32.c:702: error: 'es7000_acpi_madt_oem_check_cluster' undeclared here (not in a function)
Provide a es7000_acpi_madt_oem_check_cluster() definition in the !ACPI
case too.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
init_deasserted is only available on SMP. Make the secondary-wakeup
function conditional on SMP.
Also clean up the file some.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to
make it apparent that this is an SMP-only method
- handle NULL ->wakeup_secondary_cpus to mean the default INIT
wakeup sequence - this allows simplification of the APIC
driver templates.
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
that is only needed when CONFIG_X86_VSMP is defined with 64bit
also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
x86_quirks->update_apic() calling looks crazy. so try to remove it:
1. every apic take wakeup_cpu member directly
2. separate es7000_apic to es7000_apic_cluster
3. use uv_wakeup_cpu directly
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Not owning an nforce2 is a sign of good taste, not an error.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
http://bugzilla.kernel.org/show_bug.cgi?id=10968
[ Updated for current tree, and fixed compile failure
when p4-clockmod was built modular -- davej]
From: Matthias-Christian Ott <ott@mirix.org>
Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Dave Jones <davej@redhat.com>
Change the link order of the cpufreq modules to ensure that they're
probed in the preferred order when statically linked in.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
This is the typical message you get if you plug in a CPU
which is newer than your BIOS. It's annoying seeing this
message for each core.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
powernow-k8 driver should always try to get cpufreq info from ACPI.
Otherwise it will not be able to detect the transition latency correctly
which results in ondemand governor taking a wrong sampling rate which will
then result in sever performance loss.
Let the user not shoot himself in the foot and always compile in ACPI
support for powernow-k8.
This also fixes a wrong message if ACPI_PROCESSOR is compiled as a module and
#ifndef CONFIG_ACPI_PROCESSOR
path is chosen.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
This driver has so many long function names, and deep nested if's
The remaining warnings will need some code restructuring to clean up.
Signed-off-by: Dave Jones <davej@redhat.com>
The remaining warning about the simple_strtoul conversion
to strict_strtoul seems kind of pointless to me.
Signed-off-by: Dave Jones <davej@redhat.com>
GNU indent complains about this being ambiguous, because it's dumb.
One of my automated tests relies on the output of indent, so this shuts
it up.
Signed-off-by: Dave Jones <davej@redhat.com>
Recent changes in setup_percpu.c made a now meaningless DBG()
statement fail to compile and introduced a
comparison-of-different-types warning. Fix them.
Compile failure is reported by Ingo Molnar.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
The ones which go only into struct genapic are de-inlined
by compiler anyway, so remove the inline specifier from them.
Afterwards, remove summit_setup_portio_remap completely as it
is unused.
Remove inline also from summit_cpu_mask_to_apicid, since it's
not worth it (it is used in struct genapic too).
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use BAD_APICID instead of 0xFF constants in summit_cpu_mask_to_apicid.
Also remove bogus comments about what we actually return.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
native_usergs_sysret64 is described as
extern void native_usergs_sysret64(void)
so lets add ENDPROC here
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
NEXT_PAGE already has 'balign' so no
need to keep this redundant one.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add better first percpu allocation for NUMA
On NUMA, embedding allocator can't be used as different units can't be
made to fall in the correct NUMA nodes. To use large page mapping,
each unit needs to be remapped. However, percpu areas are usually
much smaller than large page size and unused space hurts a lot as the
number of cpus grow. This allocator remaps large pages for each chunk
but gives back unused part to the bootmem allocator making the large
pages mapped twice.
This adds slightly to the TLB pressure but is much better than using
4k mappings while still being NUMA-friendly.
Ingo suggested that this would be the correct approach for NUMA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Impact: add better first percpu allocation for !NUMA
On !NUMA, we can simply allocate contiguous memory and use it for the
first chunk without mapping it into vmalloc area. As the memory area
is covered by the large page physical memory mapping, it allows the
dynamic perpcu allocator to not add any TLB overhead for the static
percpu area and whatever falls into the first chunk and the
implementation is very simple too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: modularize percpu first chunk allocation
x86 is gonna have a few different strategies for the first chunk
allocation. Modularize it by separating out the current allocation
mechanism into pcpu_alloc_bootmem() and setup_pcpu_4k().
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: more latitude for first percpu chunk allocation
The first percpu chunk serves the kernel static percpu area and may or
may not contain extra room for further dynamic allocation.
Initialization of the first chunk needs to be done before normal
memory allocation service is up, so it has its own init path -
pcpu_setup_static().
It seems archs need more latitude while initializing the first chunk
for example to take advantage of large page mapping. This patch makes
the following changes to allow this.
* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space
to reserve in the first chunk for further dynamic allocation.
* Rename pcpu_setup_static() to pcpu_setup_first_chunk().
* Make pcpu_setup_first_chunk() much more flexible by fetching page
pointer by callback and adding optional @unit_size, @free_size and
@base_addr arguments which allow archs to selectively part of chunk
initialization to their likings.
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: minor change to populate_extra_pte() and addition of pmd flavor
Update populate_extra_pte() to return pointer to the pte_t for the
specified address and add populate_extra_pmd() which only populates
till the pmd and returns pointer to the pmd entry for the address.
For 64bit, pud/pmd/pte fill functions are separated out from
set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and
populate_extra_{pte|pmd}().
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: Cleanup
Checkin be44d2aabc eliminates the use of
a 16-bit stack for espfix. However, at least one instruction remained
that only operated on the low 16 bits of %esp.
This is not a bug per se because the kernel stack is always an aligned
4K or 8K block. Therefore it cannot cross 64K boundaries; this code,
in fact, relies strictly on that fact.
However, it's a lot cleaner (and, for that matter, smaller) to operate
on the entire 32-bit register.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
CC: Zachary Amsden <zach@vmware.com>
CC: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Impact: fix early crash on LinuxBIOS systems
Kevin O'Connor reported that Coreboot aka LinuxBIOS tries to put
mptable somewhere very high, well above max_low_pfn (below which
BIOSes generally put the mptable), causing a panic.
The BIOS will probably be changed to be compatible with older
Linus versions, but nevertheless the MP-spec does not forbid
an MP-table in arbitrary system RAM, so make sure it all
works even if the table is in an unexpected place.
Check physptr with max_low_pfn * PAGE_SIZE.
Reported-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Stefan Reinauer <stepan@coresystems.de>
Cc: coreboot@coreboot.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Make x86_quirks support more transparent. The highlevel
methods are now named:
extern void x86_quirk_pre_intr_init(void);
extern void x86_quirk_intr_init(void);
extern void x86_quirk_trap_init(void);
extern void x86_quirk_pre_time_init(void);
extern void x86_quirk_time_init(void);
This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.
Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
Remove:
- pre_setup_arch_hook()
- mca_nmi_hook()
If needed they can be added back via an x86_quirk handler.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the sysdev_suspend/resume from the callee to the callers, with
no real change in semantics, so that we can rework the disabling of
interrupts during suspend/hibernation.
This is based on an earlier patch from Linus.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now nobody cares, but the suspend/resume code will eventually want
to suspend device interrupts without suspending the timer, and will
depend on this flag to know.
The modern x86 timer infrastructure uses the local APIC timers and never
shows up as a device interrupt at all, so it isn't affected and doesn't
need any of this.
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.
If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.
This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix system hang on some systems operating with HZ_1000
On a system that stalled with HZ_1000, the first value written to
T0_CMP (when the main counter was not stopped) did not trigger an
interrupt. Instead after the main counter wrapped around (after
several minutes) an interrupt was triggered and afterwards the
periodic interrupt took effect.
This can be fixed by implementing HPET spec recommendation for
programming the periodic mode (i.e. stopping the main counter).
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Mark Hounschell <markh@compro.net>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix these sparse warnings:
arch/x86/kernel/machine_kexec_32.c:124:22: warning: Using plain integer as NULL pointer
arch/x86/kernel/traps.c:950:24: warning: Using plain integer as NULL pointer
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Cc: trivial@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As acpi_enter_sleep_state can fail, take this into account in
do_suspend_lowlevel and don't return to the do_suspend_lowlevel's
caller. This would break (currently) fpu status and preempt count.
Technically, this means use `call' instead of `jmp' and `jmp' to
the `resume_point' after the `call' (i.e. if
acpi_enter_sleep_state returns=fails). `resume_point' will handle
the restore of fpu and preempt count gracefully.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
- remove %ds re-set, it's already set in wakeup_long64
- remove double labels and alignment (ENTRY already adds both)
- use meaningful resume point labelname
- skip alignment while jumping from wakeup_long64 to the resume point
- remove .size, .type and unused labels
[v2]
- added ENDPROCs
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
Impact: Bug fix on UP
Checkin 6ec68bff3c:
x86, mce: reinitialize per cpu features on resume
introduced a call to mce_cpu_features() in the resume path, in order
for the MCE machinery to get properly reinitialized after a resume.
However, this function (and its successors) was flagged __cpuinit,
which becomes __init on UP configurations (on SMP suspend/resume
requires CPU hotplug and so this would not be seen.)
Remove the offending __cpuinit annotations for mce_cpu_features() and
its successor functions.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: cleanup
Rename TASK_SIZE64 to TASK_SIZE_MAX, and provide the
define on 32-bit too. (mapped to TASK_SIZE)
This allows 32-bit code to make use of the (former-) TASK_SIZE64
symbol as well, in a clean way.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
clean up vmi_read_cycles to use max()
Reported-b: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zach Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use new dynamic allocator, unified access to static/dynamic
percpu memory
Convert to the new dynamic percpu allocator.
* implement populate_extra_pte() for both 32 and 64
* update setup_per_cpu_areas() to use pcpu_setup_static()
* define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr()
* define config HAVE_DYNAMIC_PER_CPU_AREA
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: cleanup
There are two allocated per-cpu accessor macros with almost identical
spelling. The original and far more popular is per_cpu_ptr (44
files), so change over the other 4 files.
tj: kill percpu_ptr() and update UP too
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: mingo@redhat.com
Cc: lenb@kernel.org
Cc: cpufreq@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: economize memory for large NR_CPUS
percpu data is setup earlier than irq, we can use percpu data
to economize memory.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: fix time warps under vmware
Similar to the check for TSC going backwards in the TSC clocksource,
we also need this check for VMI clocksource.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
x86, mce: use force_sig_info to kill process in machine check
x86, mce: reinitialize per cpu features on resume
x86, rcu: fix strange load average and ksoftirqd behavior
Impact: Bugfix
The ifdef for the apic clear on shutdown for the 64bit intel thermal
vector was incorrect and never triggered. Fix that.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: bug fix (with tolerant == 3)
do_exit cannot be called directly from the exception handler because
it can sleep and the exception handler runs on the exception stack.
Use force_sig() instead.
Based on a earlier patch by Ying Huang who debugged the problem.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Impact: Bug fix
This fixes a long standing bug in the machine check code. On resume the
boot CPU wouldn't get its vendor specific state like thermal handling
reinitialized. This means the boot cpu wouldn't ever get any thermal
events reported again.
Call the respective initialization functions on resume
v2: Remove ancient init because they don't have a resume device anyways.
Pointed out by Thomas Gleixner.
v3: Now fix the Subject too to reflect v2 change
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, vm86: fix preemption bug
x86, olpc: fix model detection without OFW
x86, hpet: fix for LS21 + HPET = boot hang
x86: CPA avoid repeated lazy mmu flush
x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context
x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption
x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem
x86/cpa: make sure cpa is safe to call in lazy mmu mode
x86, ptrace, mm: fix double-free on race
Impact: build fix, cleanup
A couple of arch setup callbacks were mistakenly in apic_32.c, breaking
the build.
Also simplify the code a bit.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/
too, and rename apic_64.c to probe_64.c.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/ is getting a bit crowded, and the APIC
drivers are scattered into various different files.
Move them to arch/x86/kernel/apic/*, and also remove
the 'gen' prefix from those which had it.
Also move APIC related functionality: the IO-APIC driver,
the NMI and the IPI code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Now that all APIC code is consolidated there's nothing 'gen' about
apics anymore - so rename 'struct genapic' to 'struct apic'.
This shortens the code and is nicer to read as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- misc other cleanups that change the md5 signature
- consolidate global variables
- remove unnecessary __numaq_mps_oem_check() wrapper
- make numaq_mps_oem_check static
- update copyrights
- misc other cleanups pointed out by checkpatch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
These are cleanups that change the md5 signature:
- asm/ => linux/ include conversion
- simplify the code flow of find_unisys_acpi_oem_table()
- move ACPI methods into one #ifdef block
- remove 0/NULL initialization of statics
- simplify/standardize printouts
- update copyrights
- more cleanups, pointed out by checkpatch
arch/x86/kernel/es7000_32.o:
text data bss dec hex filename
2693 192 44 2929 b71 es7000_32.o.before
2688 192 44 2924 b6c es7000_32.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- a number of structure definitions were stale
- remove needless wrappers around apic definitions
- fix details noticed by checkpatch
No code changed:
md5:
029d8fde0aaf6e934ea63bd8b36430fd es7000_32.o.before.asm
029d8fde0aaf6e934ea63bd8b36430fd es7000_32.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
In the subarch times there were a number of externs between
various bits of the ES7000 code. Now that there's a single
es7000-platform support file, the externs can be removed and
the functions can be changed the statics.
Beyond the cleanup factor, this also shrinks the size of the
kernel image a bit:
arch/x86/kernel/es7000_32.o:
text data bss dec hex filename
2813 192 44 3049 be9 es7000_32.o.before
2693 192 44 2929 b71 es7000_32.o.after
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There were multiple definitions of apicid_cluster() scattered around
in APIC drivers - but the definitions are equivalent to the already
existing generic APIC_CLUSTER() method.
So remove apicid_cluster() and change all users to APIC_CLUSTER().
No code changed:
md5:
1b8244ba8d3d6a454593ce10f09dfa58 summit_32.o.before.asm
1b8244ba8d3d6a454593ce10f09dfa58 summit_32.o.after.asm
md5:
a593d98a882bf534622c70d9568497ac es7000_32.o.before.asm
a593d98a882bf534622c70d9568497ac es7000_32.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
- remove unnecessary indirections that were artifacts of the subarch code
- clean up include file section
- clean up various small details
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
APIC_DEFINITION was a hack from the x86 subarch times, it has no
meaning anymore - remove it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- make oprofile build
- select X86_X2APIC from X86_UV - it relies on it
- export genapic for oprofile modular build
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
make it simpler, don't need have one extra struct.
v2: fix the sgi_uv build
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
so could deselect x2apic
and INTR_REMAP will select x2apic
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
1. move localise_nmi_watchdog() later
2. change setup_boot_APIC_clock() to setup_boot_clock() for 64-bit
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
