Commit Graph

653 Commits

Author SHA1 Message Date
Linus Torvalds
5cc1035062 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.
2010-10-22 20:30:48 -07:00
Linus Torvalds
c70b5296e7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits)
  [SCSI] be2iscsi: SGE Len == 64K
  [SCSI] be2iscsi: Remove premature free of cid
  [SCSI] be2iscsi: More time for FW
  [SCSI] libsas: fix bug for vacant phy
  [SCSI] sd: Fix overflow with big physical blocks
  [SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer
  [SCSI] libsas: Don't issue commands to devices that have been hot-removed
  [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
  [SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17
  [SCSI] lpfc 8.3.17: Replace function reset methodology
  [SCSI] lpfc 8.3.17: SCSI fixes
  [SCSI] lpfc 8.3.17: BSG fixes
  [SCSI] lpfc 8.3.17: SLI Additions and Fixes
  [SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes
  [SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
  [SCSI] ipr: fix array error logging
  [SCSI] aha152x: enable PCMCIA on 64bit
  [SCSI] scsi_dh_alua: Handle all states correctly
  [SCSI] cxgb4i: connection and ddp setting update
  [SCSI] cxgb3i: fixed connection over vlan
  ...
2010-10-22 17:34:15 -07:00
Linus Torvalds
a2887097f2 Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
  xen-blkfront: disable barrier/flush write support
  Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
  block: remove BLKDEV_IFL_WAIT
  aic7xxx_old: removed unused 'req' variable
  block: remove the BH_Eopnotsupp flag
  block: remove the BLKDEV_IFL_BARRIER flag
  block: remove the WRITE_BARRIER flag
  swap: do not send discards as barriers
  fat: do not send discards as barriers
  ext4: do not send discards as barriers
  jbd2: replace barriers with explicit flush / FUA usage
  jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
  jbd: replace barriers with explicit flush / FUA usage
  nilfs2: replace barriers with explicit flush / FUA usage
  reiserfs: replace barriers with explicit flush / FUA usage
  gfs2: replace barriers with explicit flush / FUA usage
  btrfs: replace barriers with explicit flush / FUA usage
  xfs: replace barriers with explicit flush / FUA usage
  block: pass gfp_mask and flags to sb_issue_discard
  dm: convey that all flushes are processed as empty
  ...
2010-10-22 17:07:18 -07:00
Michal Nazarewicz
0a6a717cef USB: gadget: storage: reuse definitions from scsi.h header file
This commit changes storage_common.h, file_storage.c and
f_mass_storage.c to use definitions of SCSI commands from
scsi/scsi.h file instead of redefining the commands in
storage_common.c.

scsi/scsi.h header file was missing READ_FORMAT_CAPACITIES and
READ_HEADER so this commit also add those to the header.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:22:07 -07:00
Hans de Goede
5ce524bdff scsi/sd: add a no_read_capacity_16 scsi_device flag
I seem to have a knack for digging up buggy usb devices which don't work
with Linux, and I'm crazy enough to try to make them work.  So this time a
friend of mine asked me to get an mp4 player (an mp3 player which can play
videos on a small screen) to work with Linux.

It is based on the well known rockbox chipset for which we already have an
unusual devs entries to work around some of its bugs.  But this model
comes with an additional twist.

This model chokes on read_capacity_16 calls.  Now normally we don't make
those calls, but this model comes with an sdcard slot and when there is no
card in there (and shipped from the factory there is none), it reports a
size of 0.  However this time the programmers actually got the
read_capacity_10 response right!  So they substract one from the size as
stored internally in the mp3 player before reporting it back, resulting in
an answer of ...  0xffffffff sectors, causing sd.c to try a
read_capacity_16, on which the device crashes.

This patch adds a flag to scsi_device to indicate that a a device cannot
handle read_capacity_16, and when this flag is set if a device reports an
lba of 0xffffffff as answer to a read_capacity_10, assumes it tries to
report a size of 0.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:22:05 -07:00
Hans de Goede
8e04d8056c scsi/sr: add no_read_disc_info scsi_device flag
Some USB devices emulate a usb-mass-storage attached (scsi) cdrom device,
usually this fake cdrom contains the windows software for the device.
While working on supporting Appotech ax3003 based photoframes, which do
this I discovered that they will go of into lala land when ever they see a
READ_DISC_INFO scsi command.

Thus this patch adds a scsi_device flag (which can then be set by the
usb-storage driver through an unsual-devs entry), to indicate this, and
makes the sr driver honor this flag.

I know this sucks, but as discussed on linux-scsi list there is no other
way to make this device work properly.

Looking at usb traces made under windows, windows never sends a
READ_DISC_INFO during normal interactions with a usb cdrom device.  So as
this cdrom emulation thingie becomes more common we might see more of this
problem.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:22:04 -07:00
Darrick J. Wong
56dd2c0691 [SCSI] libsas: Don't issue commands to devices that have been hot-removed
sd will get hung up issuing commands to flush write cache if a SAS
device behind the expander is unplugged without warning.  Change libsas
to reject commands to domain devices that have already gone away.

[maciej.trela@intel.com: removed setting ->gone in sas_deform_port() to
 permit sync cache commands at module removal]

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Tested-by: Haipao Fan <haipao.fan@intel.com>
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-08 16:03:42 -05:00
Mike Christie
43ca910a9c [SCSI] fc class: add fc host dev loss sysfs file
This adds a fc host dev loss sysfs file. Instead of
calling into the driver using the get_host_def_dev_loss_tmo
callback, we allow drivers to init the dev loss like is done
for other fc host params, and then the fc class will handle
updating the value if the user writes to the new sysfs file.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-07 17:09:44 -05:00
Martin K. Petersen
13f05c8d8e block/scsi: Provide a limit on the number of integrity segments
Some controllers have a hardware limit on the number of protection
information scatter-gather list segments they can handle.

Introduce a max_integrity_segments limit in the block layer and provide
a new scsi_host_template setting that allows HBA drivers to provide a
value suitable for the hardware.

Add support for honoring the integrity segment limit when merging both
bios and requests.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2010-09-10 20:50:10 +02:00
Tejun Heo
9cbbdca44a block: remove spurious uses of REQ_HARDBARRIER
REQ_HARDBARRIER is deprecated.  Remove spurious uses in the following
users.  Please note that other than osdblk, all other uses were
already spurious before deprecation.

* osdblk: osdblk_rq_fn() won't receive any request with
  REQ_HARDBARRIER set.  Remove the test for it.

* pktcdvd: use of REQ_HARDBARRIER in pkt_generic_packet() doesn't mean
  anything.  Removed.

* aic7xxx_old: Setting MSG_ORDERED_Q_TAG on REQ_HARDBARRIER is
  spurious.  Removed.

* sas_scsi_host: Setting TASK_ATTR_ORDERED on REQ_HARDBARRIER is
  spurious.  Removed.

* scsi_tcq: The ordered tag path wasn't being used anyway.  Removed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:36 +02:00
Mike Christie
b8ef3204f4 [SCSI] fc class: add fc host default default dev loss setting
This patch adds a fc_host setting to store the
default dev_loss_tmo. It is used if the driver
has a callack to get the value from the LLD. If
the callback is not set, then we use the fc class
module default value.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 13:45:23 -03:00
Peter Korsgaard
083c8c1e60 scsi: use __uX types for headers exported to user space
Commit 9e4f5e29 ("FC Pass Thru support") exported a number of header files
in include/scsi to user space, but didn't change the uX types to the
userspace-compatible __uX types.  Without that you'll get compile errors
when including them - E.G.:

include/scsi/scsi.h:145: error: expected specifier-qualifier-list before `u8'

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Smart <james.smart@emulex.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:01 -07:00
Alan Stern
bc4f24014d [SCSI] implement runtime Power Management
This patch (as1398b) adds runtime PM support to the SCSI layer.  Only
the machanism is provided; use of it is up to the various high-level
drivers, and the patch doesn't change any of them.  Except for sg --
the patch expicitly prevents a device from being runtime-suspended
while its sg device file is open.

The implementation is simplistic.  In general, hosts and targets are
automatically suspended when all their children are asleep, but for
them the runtime-suspend code doesn't actually do anything.  (A host's
runtime PM status is propagated up the device tree, though, so a
runtime-PM-aware lower-level driver could power down the host adapter
hardware at the appropriate times.)  There are comments indicating
where a transport class might be notified or some other hooks added.

LUNs are runtime-suspended by calling the drivers' existing suspend
handlers (and likewise for runtime-resume).  Somewhat arbitrarily, the
implementation delays for 100 ms before suspending an eligible LUN.
This is because there typically are occasions during bootup when the
same device file is opened and closed several times in quick
succession.

The way this all works is that the SCSI core increments a device's
PM-usage count when it is registered.  If a high-level driver does
nothing then the device will not be eligible for runtime-suspend
because of the elevated usage count.  If a high-level driver wants to
use runtime PM then it can call scsi_autopm_put_device() in its probe
routine to decrement the usage count and scsi_autopm_get_device() in
its remove routine to restore the original count.

Hosts, targets, and LUNs are not suspended while they are being probed
or removed, or while the error handler is running.  In fact, a fairly
large part of the patch consists of code to make sure that things
aren't suspended at such times.

[jejb: fix up compile issues in PM config variations]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:07:50 -05:00
James Bottomley
df64d3caab [SCSI] Unify SAM_ and SAM_STAT_ macros
We have two separate definitions for identical constants with nearly the
same name.  One comes from the generic headers in scsi.h; the other is
an enum in libsas.h ... it's causing confusion about which one is
correct (fortunately they both are).

Fix this by eliminating the libsas.h duplicate

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:07:49 -05:00
Mike Christie
c01be6dcb2 [SCSI] iscsi_transport: wait on session in error handler path
wait for session to come online in eh_device_reset_handler
and eh_target_reset_handler

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:06:06 -05:00
Joe Eykholt
9226115695 [SCSI] libfc: don't require a local exchange for incoming requests
Incoming requests shouldn't require a local exchange if we're
just going to reply with one or two frames and don't expect
anything further.  Don't allocate exchanges for such requests
until requested by the upper-layer protocol.

The sequence is always NULL for new requests, so remove
that as an argument to request handlers.

Also change the first argument to lport->tt.seq_els_rsp_send
from the sequence pointer to the received frame pointer, to
supply the exchange IDs and destination ID info.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:06:02 -05:00
Joe Eykholt
239e81048b [SCSI] libfc: add interface to allocate a sequence for incoming requests
For incoming ELS and FCP requests, we often don't require an
exchange and sequence, however, sometimes we do.  For those cases,
(primarily FCP requests for targets) add a function to set up
the exchange and sequence.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:06:01 -05:00
Joe Eykholt
24f089e2f2 [SCSI] libfc: add fc_fill_reply_hdr() and fc_fill_hdr()
Add functions to fill in an FC header given a request header.
These reduces code lines in fc_lport and fc_rport and works
without an exchange/sequence assigned.

fc_fill_reply_hdr() fills a header for a final reply frame.

fc_fill_hdr() which is similar but allows specifying the
f_ctl parameter.

Add defines for F_CTL values FC_FCTL_REQ and FC_FCTL_RESP.
These can be used for most request and response sequences.

v2 of patch adds a line to copy the frame encapsulation
info from the received frame.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:06:00 -05:00
Joe Eykholt
251748a99e [SCSI] libfc: add fc_frame_sid() and fc_frame_did() functions
To pave the way for eliminating exchanges from incoming requests,
add simple inline fc_frame_sid() and fc_frame_did() functions
which get the FC_IDs from the frame header.  This can be almost
as efficient as getting them from the sequence/exchange.

Move ntohll, htonll, ntoh24 and hton24 to <scsi/fc_frame.h>
since we need them there and that's included by <scsi/libfc.h>

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:59 -05:00
Joe Eykholt
079ecd8cfe [SCSI] libfc: eliminate rport LOGO state
The LOGO state hasn't been used in a while, except in a brief
transition to DELETE state while holding the rport mutex.
All port LOGO responses have been ignored as well as any timeout
if we don't get a response.

So this patch just removes LOGO state and simplifies the response handler.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:58 -05:00
Joe Eykholt
e10f8c667b [SCSI] libfcoe: fcoe: fnic: add FIP VN2VN point-to-multipoint support
The FC-BB-6 committee is proposing a new FIP usage model called
VN_port to VN_port mode.  It allows VN_ports to discover each other
over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric
services.  This is point-to-multipoint.  There is also a variant
of this called point-to-point which provides for making sure there
is just one pair of ports operating over the Ethernet fabric.

We add these new states:  VNMP_START, _PROBE1, _PROBE2, _CLAIM, and _UP.
These usually go quickly in that sequence.  After waiting a random
amount of time up to 100 ms in START, we select a pseudo-random
proposed locally-unique port ID and send out probes in states PROBE1
and PROBE2, 100 ms apart.  If no probe responses are heard, we
proceed to CLAIM state 400 ms later and send a claim notification.
We wait another 400 ms to receive claim responses, which give us
a list of the other nodes on the network, including their FC-4
capabilities.  After another 400 ms we go to VNMP_UP state and
should start interoperating with any of the nodes for whic we
receivec claim responses.  More details are in the spec.j

Add the new mode as FIP_MODE_VN2VN.  The driver must specify
explicitly that it wants to operate in this mode.  There is
no automatic detection between point-to-multipoint and fabric
mode, and the local port initialization is affected, so it isn't
anticipated that there will ever be any such automatic switchover.

It may eventually be possible to have both fabric and VN2VN
modes on the same L2 network, which may be done by two separate
local VN_ports (lports).

When in VN2VN mode, FIP replaces libfc's fabric-oriented discovery
module with its own simple code that adds remote ports as they
are discovered from incoming claim notifications and responses.
These hooks are placed by fcoe_disc_init().

A linear list of discovered vn_ports is maintained under the
fcoe_ctlr struct.  It is expected to be short for now, and
accessed infrequently.  It is kept under RCU for lock-ordering
reasons.  The lport and/or rport mutexes may be held when we
need to lookup a fcoe_vnport during an ELS send.

Change fcoe_ctlr_encaps() to lookup the destination vn_port in
the list of peers for the destination MAC address of the
FIP-encapsulated frame.

Add a new function fcoe_disc_init() to initialize just the
discovery portion of libfcoe for VN2VN mode.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:56 -05:00
Joe Eykholt
edcbb4395e [SCSI] libfcoe: add protocol description of FIP VN2VN mode
The FC-BB-6 committee is proposing a new FIP usage model called
VN_port to VN_port mode.  It allows VN_ports to discover each other
over a loss-free L2 Ethernet without any FCF or Fibre-channel fabric
services.  This is point-to-multipoint.  There is also a variant
of this called point-to-point which provides for making sure there
is just one pair of ports operating over the Ethernet fabric.

This patch defines the new message type and subtypes as well as
one new descriptor type used by VN2VN mode.

These are all still at the proposed stage and subject to change.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:55 -05:00
Joe Eykholt
f60e12e9c7 [SCSI] libfc: track FIP exchanges
When an exchange is received with a FIP encapsulation, we need
to know that the response must be sent via FIP and what the original
ELS opcode was.  This becomes important for VN2VN mode, where we may
receive FLOGI or LOGO from several peer VN_ports, and the LS_ACC or
LS_RJT must be sent FIP-encapsulated with the correct sub-type.

Add a field to the struct fc_frame, fr_encaps, to indicate the
encapsulation values.  That term is chosen to be neutral and
LLD-agnostic in case non-FCoE/FIP LLDs might find it useful.

The frame fr_encaps is transferred from the ingress frame to the
exchange by fc_exch_recv_req(), and back to the outgoing frame
by fc_seq_send().

This is taking the last byte in the skb->cb array.  If needed,
we could combine the info in sof, eof, flags, and encaps
together into one field, but it'd be better to do that if
and when its needed.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:54 -05:00
Joe Eykholt
a7b12a279f [SCSI] libfc: add FLOGI state to rport for VN2VN
The FIP proposal for VN_port to VN_port point-to-multipoint
operation requires a FLOGI be sent to each remote port.
The FLOGI is sent with the assigned S_ID and D_IDs of the
local and remote ports.  This and the response get
FIP-encapsulated for Ethernet.

Add FLOGI state to the remote port state machine.
This will be skipped if not in point-to-multipoint mode.

To reduce a little duplication between PLOGI and FLOGI
response handling, added fc_rport_login_complete(), which
handles the parameters for the rdata struct.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:53 -05:00
Joe Eykholt
3726f3584e [SCSI] libfc: Add local port point-to-multipoint flag
For VN_port to VN_port mode, the transport sets the port_id and
there's no lport FLOGI.  This is similar to FC loop mode.

Add a point_to_multipoint flag that indicates the local port is in
point-to-multipoint mode.  This skips FLOGI and discovery.
It also skips resetting the port_id on resets other than link down.

Add function fc_lport_set_local_id() that sets the local port_id.
This is called by libfcoe on behalf of the low-level driver
to set the port_id when the link comes up.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:53 -05:00
Joe Eykholt
3d902ac09a [SCSI] libfcoe: fcoe: fnic: change fcoe_ctlr_init interface to specify mode
There are three modes that libfcoe currently supports, and a new one
is coming.  Change the fcoe_ctlr_init() interface to add the mode
desired.  This should not change any functionality.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:52 -05:00
Joe Eykholt
0685230c59 [SCSI] libfc: add discovery-private pointer for LLD
For VN_port to VN_port mode, FIP will do discovery and needs a
way to find its state from the local port or discovery structure.
It seems that any other LLD that implements its own discovery
would also need something like this.

Replace disc->lport with disc->priv, and use container_of to
find the lport.  We could use disc->priv for that, but
container_of is smaller and faster.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:52 -05:00
Joe Eykholt
fdb068c6cd [SCSI] libfcoe: convert FIP to lock with mutex instead of spin lock
It turns out most of the FIP work is now done from worker threads
or process context now, so there's no need to use a spin lock.

Change to use mutex instead of spin lock and delayed_work instead
of a timer.

This will make it nicer for the VN_port to VN_port feature that
will interact more with the libfc layers requiring that
spinlocks not be held.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:51 -05:00
Joe Eykholt
f90377abca [SCSI] libfc: provide space for LLD after remote port structure
Add pre-zeroed space after the allocation for fc_rport_priv
for use by the lower-level driver.

This is primarily for VN2VN FIP mode, but could be used in
other ways someday.

The space required is specified in lport->rport_priv_size.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:49 -05:00
Joe Eykholt
42e9041467 [SCSI] libfc: convert rport lookup to be RCU safe
To allow LLD to do lookups on rports without grabbing a mutex,
make them RCU-safe.  The caller of lport->tt.rport_lookup will
have the choice of holding disc_mutex or the rcu_read_lock().

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:48 -05:00
Vasu Dev
519e5135e2 [SCSI] fcoe: adds src and dest mac address checking for fcoe frames
This is  per FC-BB-5 Annex-D recommendation and per that
if address checking fails then drop the frame.

FIP code paths are already doing this so only needed for fcoe
frames.

The src address checking is limited to only fip mode since
this might break non-fip mode used in p2p due to used OUI
based addressing in some p2p code paths, going forward FIP
will be the only mode, therefore limited this to only FIP
mode so that it won't break non-fip p2p mode for now.

-v2
Removes FCOE packet type checking since fcoe_rcv is
registered to receive only FCoE type packets from netdev
and it is already checked by netdev.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:47 -05:00
Bart Van Assche
d058fd31c7 [SCSI] fcoe: make it possible to verify fcoe with sparse
Analyzing fcoe with sparse currently fails. This is because struct
fcoe_rcv_info contains two enum members that have been declared with
__attribute__((packed)). Apparently gcc honors this attribute while sparse
ignores it. The result is that sizeof(struct fcoe_rcv_info)
== sizeof(struct sk_buff::cb) == 48 on a 64-bit system according to gcc, but
not according to sparse. The patch below modifies the definition of
struct fcoe_rcv_info such that gcc and sparse interpret this structure
definition in the same way. The current sparse output is as follows:

$ cd linux-2.6.34
$ make C=2 M=drivers/scsi/fcoe modules
 CHECK   drivers/scsi/fcoe/fcoe.c

include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1.
 CC [M]  drivers/scsi/fcoe/fcoe.o
 CHECK   drivers/scsi/fcoe/libfcoe.c

include/scsi/fc_frame.h:81:9: error: invalid bitfield width, -1.
drivers/scsi/fcoe/libfcoe.c:56:37: error: invalid initializer

Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com>
Cc: jeykholt@cisco.com
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:44 -05:00
Vikas Chaudhary
3b2bef1fc8 [SCSI] iscsi_transport: added new iscsi_param to display target alias in sysfs
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:05:25 -05:00
Joe Eykholt
f034260db3 [SCSI] libfc: fix indefinite rport restart
Remote ports were restarting indefinitely after getting
rejects in PRLI.

Fix by adding a counter of restarts and limiting that with
the port login retry limit as well.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:01:53 -05:00
Joe Eykholt
4b2164d4d2 [SCSI] libfc: Fix remote port restart problem
This patch somewhat combines two fixes to remote port handing in libfc.

The first problem was that rport work could be queued on a deleted
and freed rport.  This is handled by not resetting rdata->event
ton NONE if the rdata is about to be deleted.

However, that fix led to the second problem, described by
Bhanu Gollapudi, as follows:
> Here is the sequence of events. T1 is first LOGO receive thread, T2 is
> fc_rport_work() scheduled by T1 and T3 is second LOGO receive thread and
> T4 is fc_rport_work scheduled by T3.
>
> 1. (T1)Received 1st LOGO in state Ready
> 2. (T1)Delete port & enter to RESTART state.
> 3. (T1)schdule event_work, since event is RPORT_EV_NONE.
> 4. (T1)set event = RPORT_EV_LOGO
> 5. (T1)Enter RESTART state as disc_id is set.
> 6. (T2)remember to PLOGI, and set event = RPORT_EV_NONE
> 6. (T3)Received 2nd LOGO
> 7. (T3)Delete Port & enter to RESTART state.
> 8. (T3)schedule event_work, since event is RPORT_EV_NONE.
> 9. (T3)Enter RESTART state as disc_id is set.
> 9. (T3)set event = RPORT_EV_LOGO
> 10.(T2)work restart, enter PLOGI state and issues PLOGI
> 11.(T4)Since state is not RESTART anymore, restart is not set, and the
> event is not reset to RPORT_EV_NONE. (current event is RPORT_EV_LOGO).
> 12. Now, PLOGI succeeds and fc_rport_enter_ready() will not schedule
> event_work, and hence the rport will never be created, eventually losing
> the target after dev_loss_tmo.

So, the problem here is that we were tracking the desire for
the rport be restarted by state RESTART, which was otherwise
equivalent to DELETE.  A contributing factor is that we dropped
the lock between steps 6 and 10 in thread T2, which allows the
state to change, and we didn't completely re-evaluate then.

This is hopefully corrected by the following minor redesign:

Simplify the rport restart logic by making the decision to
restart after deleting the transport rport.  That decision
is based on a new STARTED flag that indicates fc_rport_login()
has been called and fc_rport_logoff() has not been called
since then.  This replaces the need for the RESTART state.

Only restart if the rdata is still in DELETED state
and only if it still has the STARTED flag set.

Also now, since we clear the event code much later in the
work thread, allow for the possibility that the rport may
have become READY again via incoming PLOGI, and if so,
queue another event to handle that.

In the problem scenario, the second LOGO received will
cause the LOGO event to occur again.

Reported-by: Bhanu Gollapudi <bprakash@broadcom.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:01:52 -05:00
Bhanu Prakash Gollapudi
f8fc6c2c99 [SCSI] libfc: Handle unsolicited PRLO request
Resubmitting after incorporating Joe's review comment.

Unsolicited PRLO request is now handled by sending LS_ACC,
and then relogin to the remote port if an N-port login
session exists for that remote port.

Note that this patch should be applied on top of Joe Eykholt's
"Fix remote port restart problem" patch.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:01:46 -05:00
Joe Eykholt
5d4a2e29fb [SCSI] fcoe: clean up TBD comments in FCoE prototype header
Some old comments in fc_fcoe.h say TBD long after the
standard has been passed by T11.  Clean them up.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:01:46 -05:00
Tejun Heo
72ec24bd77 SCSI: implement sd_unlock_native_capacity()
Implement sd_unlock_native_capacity() method which calls into
hostt->unlock_native_capacity() if implemented.  This will be invoked
by block layer if partitions extend beyond the end of the device and
can be used to implement, for example, on-demand ATA host protected
area unlocking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-02 13:50:04 -04:00
Robert Love
7b2787ec15 [SCSI] libfc: Move the port_id into lport
This patch creates a port_id member in struct fc_lport.
This allows libfc to just deal with fc_lport instances
instead of calling into the fc_host to get the port_id.

This change helps in only using symbols necessary for
operation from the libfc structures. libfc still needs
to change the fc_host_port_id() if the port_id changes
so the presentation layer (scsi_transport_fc) can provide
the user with the correct value, but libfc shouldn't
rely on the presentation layer for operational values.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16 22:22:34 -04:00
Robert Love
1b80e0f91c [SCSI] libfc: Remove unused fc_get_host_port_type
Remove this unused routine.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16 22:22:29 -04:00
Tom Rini
7407e5bba2 [SCSI] Unexport scsi/scsi.h from headers_install
The scsi/scsi.h header is normally provided by the libc (and was not
exported by the kernel since 2.6.24) and has been until it was
re-exported with 2.6.31.  The kernel version is not userspace clean and
does not appear to provide anything useable in userland over the
(e)glibc version.

Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02 11:45:12 -04:00
Martin K. Petersen
59c31b69d2 [SCSI] Add missing scsi command definitions
Add definitions for VERIFY(12) and VERIFY(32).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-30 12:46:17 -05:00
Vasu Dev
da87bfab8a [SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.
No reason to restrict CDB size to 12 bytes in fcoe, so
increased to 16 so that 16 bytes SCSI CDB doesn't fail.

Uses common define to set max_cmd_len for fcoe and fnic,
fnic is already setting max_cmd_len to 16.

sg_readcap -l fails without this fix.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 14:02:39 -05:00
Joe Eykholt
0b2f74a47f [SCSI] libfc: fix hton24 macro to take expressions as args
hton24(p + 3, value) would fail to compile because
p + 3[0] is not a valid expression.

Went ahead and converted hton24 and ntoh24 to inline
functions, which is better because the parameters
are evalutated only once.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 14:02:34 -05:00
Christof Schmitt
2f2eb58762 [SCSI] Allow FC LLD to fast-fail scsi eh by introducing new eh return
If the scsi eh is running and then a FC LLD calls
fc_remote_port_delete, the SCSI commands sent from the eh will fail.
To prevent this, a FC LLD can call fc_block_scsi_eh from the eh
callback, blocking the eh thread until the dev_loss_tmo fires or the
remote port is available again.

If (e.g. for a multipathing setup) the dev_loss_tmo is set to a very
large value, thus preventing the scsi device removal , the scsi eh can
block for a long time. For multipathing, the fast_io_fail_tmo is then
set to a low value to detect path problems sooner.

This patch introduces a new return code FAST_IO_FAIL. The function
fc_block_scsi_eh now returns FAST_IO_FAIL when the fast_io_fail_tmo
fires. This indicates that the LLD terminated all pending I/O requests
and there are no more pending SCSI commands for the scsi eh to wait
for. This return code can be passed back to the scsi eh to stop the
escalation and finish the recovery process for this device.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 09:49:33 -05:00
Joe Eykholt
f018b73af6 [SCSI] libfc, libfcoe, fcoe: use smp_processor_id() only when preempt disabled
When the kernel is configured for preemption, using smp_processor_id()
when preemption is enabled causes a warning backtrace and is wrong
since we could move off of that CPU as soon as we get the ID,
and we would be referencing the wrong CPU, and possibly an invalid one
if it could be hotswapped out.

Remove the fc_lport_get_stats() function and explicitly use per_cpu_ptr()
to get the statistics.  Where preemption has been disabled by holding
a _bh lock continue to use smp_processor_id(), but otherwise use
get_cpu()/put_cpu().

In fcoe_recv_frame() also changed the cases where we return in the
middle to do a goto to the code which bumps ErrorFrames and does
a put_cpu().  Two of these cases didn't bump ErrorFrames before, but
doing so is harmless because they "can't happen", due to prior length
checks.

Also rearranged code in fcoe_recv_frame() to have only one call to
fc_exch_recv().  It's just as efficient and saves a call to put_cpu().

In fc_fcp.c, adjusted a FIXME comment for code which doesn't need fixing.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 09:23:44 -05:00
Joe Eykholt
4291365784 [SCSI] libfcoe: eliminate unused link and last_link fields
The link and last_link fields in the fcoe_ctlr struct are no
longer useful, since they are always set to the same value,
and FIP always calls libfc to pass link information to the lport.

Eliminate those fields and rename link_work to timer_work, since
it no longer has any link change work to do.

Thanks to Brian Uchino for discovering this issue.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 09:23:38 -05:00
Joe Eykholt
4dc7ccf7e9 [SCSI] libfc: add definition for task attribute mask
The FCP command header definition should define a mask for
the task attribute field.  This adds that #define.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11 09:23:34 -05:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Linus Torvalds
961cde93de Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits)
  [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport
  [SCSI] bfa: Update the driver version to 2.1.2.1.
  [SCSI] bfa: Remove unused header files and did some cleanup.
  [SCSI] bfa: Handle SCSI IO underrun case.
  [SCSI] bfa: FCS and include file changes.
  [SCSI] bfa: Modified the portstats get/clear logic
  [SCSI] bfa: Replace bfa_get_attr() with specific APIs
  [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO).
  [SCSI] bfa: Rename pport to fcport in BFA FCS.
  [SCSI] bfa: IOC fixes, check for IOC down condition.
  [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state.
  [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt.
  [SCSI] bfa: IOC recovery fix in fcmode.
  [SCSI] bfa: AEN and byte alignment fixes.
  [SCSI] bfa: Introduce a link notification state machine.
  [SCSI] bfa: Added firmware save clear feature for BFA driver.
  [SCSI] bfa: FCS authentication related changes.
  [SCSI] bfa: PCI VPD, FIP and include file changes.
  [SCSI] bfa: Fix to copy fpma MAC when requested by user space application.
  [SCSI] bfa: RPORT state machine: direct attach mode fix.
  ...
2010-03-18 16:54:31 -07:00