Now that both native and compat ioctl syscalls are
in the same file, a couple of simplifications can
be made, bringing the implementation closer together:
- do_vfs_ioctl(), ioctl_preallocate(), and compat_ioctl_preallocate()
can become static, allowing the compiler to optimize better
- slightly update the coding style for consistency between
the functions.
- rather than listing each command in two switch statements
for the compat case, just call a single function that has
all the common commands.
As a side-effect, FS_IOC_RESVSP/FS_IOC_RESVSP64 are now available
to x86 compat tasks, along with FS_IOC_RESVSP_32/FS_IOC_RESVSP64_32.
This is harmless for i386 emulation, and can be considered a bugfix
for x32 emulation, which never supported these in the past.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the allocation
request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never been
mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing them
to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio corrupting
the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to reduce
indirection penalties
- Ensure that dquots are attached to the inode when performing unwritten
extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks
-----BEGIN PGP SIGNATURE-----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=aACq
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"For this release, we changed quite a few things.
Highlights:
- Fixed some long tail latency problems in the block allocator
- Removed some long deprecated (and for the past several years no-op)
mount options and ioctls
- Strengthened the extended attribute and directory verifiers
- Audited and fixed all the places where we could return EFSCORRUPTED
without logging anything
- Refactored the old SGI space allocation ioctls to make the
equivalent fallocate calls
- Fixed a race between fallocate and directio
- Fixed an integer overflow when files have more than a few
billion(!) extents
- Fixed a longstanding bug where quota accounting could be incorrect
when performing unwritten extent conversion on a freshly mounted fs
- Fixed various complaints in scrub about soft lockups and
unresponsiveness to signals
- De-vtable'd the directory handling code, which should make it
faster
- Converted to the new mount api, for better or for worse
- Cleaned up some memory leaks
and quite a lot of other smaller fixes and cleanups.
A more detailed summary:
- Fill out the build string
- Prevent inode fork extent count overflows
- Refactor the allocator to reduce long tail latency
- Rework incore log locking a little to reduce spinning
- Break up the xfs_iomap_begin functions into smaller more cohesive
parts
- Fix allocation alignment being dropped too early when the
allocation request is for more blocks than an AG is large
- Other small cleanups
- Clean up file buftarg retrieval helpers
- Hoist the resvsp and unresvsp ioctls to the vfs
- Remove the undocumented biosize mount option, since it has never
been mentioned as existing or supported on linux
- Clean up some of the mount option printing and parsing
- Enhance attr leaf verifier to check block structure
- Check dirent and attr names for invalid characters before passing
them to the vfs
- Refactor open-coded bmbt walking
- Fix a few places where we return EIO instead of EFSCORRUPTED after
failing metadata sanity checks
- Fix a synchronization problem between fallocate and aio dio
corrupting the file length
- Clean up various loose ends in the iomap and bmap code
- Convert to the new mount api
- Make sure we always log something when returning EFSCORRUPTED
- Fix some problems where long running scrub loops could trigger soft
lockup warnings and/or fail to exit due to fatal signals pending
- Fix various Coverity complaints
- Remove most of the function pointers from the directory code to
reduce indirection penalties
- Ensure that dquots are attached to the inode when performing
unwritten extent conversion after io
- Deuglify incore projid and crtime types
- Fix another AGI/AGF locking order deadlock when renaming
- Clean up some quota typedefs
- Remove the FSSETDM ioctls which haven't done anything in 20 years
- Fix some memory leaks when mounting the log fails
- Fix an underflow when updating an xattr leaf freemap
- Remove some trivial wrappers
- Report metadata corruption as an error, not a (potentially) fatal
assertion
- Clean up the dir/attr buffer mapping code
- Allow fatal signals to kill scrub during parent pointer checks"
* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
xfs: allow parent directory scans to be interrupted with fatal signals
xfs: remove the mappedbno argument to xfs_da_get_buf
xfs: remove the mappedbno argument to xfs_da_read_buf
xfs: split xfs_da3_node_read
xfs: remove the mappedbno argument to xfs_dir3_leafn_read
xfs: remove the mappedbno argument to xfs_dir3_leaf_read
xfs: remove the mappedbno argument to xfs_attr3_leaf_read
xfs: remove the mappedbno argument to xfs_da_reada_buf
xfs: improve the xfs_dabuf_map calling conventions
xfs: refactor xfs_dabuf_map
xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
xfs: report corruption only as a regular error
xfs: Remove kmem_zone_free() wrapper
xfs: Remove kmem_zone_destroy() wrapper
xfs: Remove slab init wrappers
xfs: fix attr leaf header freemap.size underflow
xfs: fix some memory leaks in log recovery
xfs: fix another missing include
xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
xfs: remove duplicated include from xfs_dir2_data.c
...
These use the same scheme as the pre-existing mapping of the XFS
RESVP ioctls to ->falloc, so just extend it and remove the XFS
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick: fix compile error on s390]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
... and lose the ridiculous games with compat_alloc_user_space()
there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new fallocate mode flag that explicitly unshares blocks on
filesystems that support such features. The new flag can only
be used with an allocate-mode fallocate call.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
FALLOC_FL_INSERT_RANGE command is the opposite command of
FALLOC_FL_COLLAPSE_RANGE that is needed for someone who wants to add
some data in the middle of file.
FALLOC_FL_INSERT_RANGE will create space for writing new data within
a file after shifting extents to right as given length. This command
also has same limitations as FALLOC_FL_COLLAPSE_RANGE in that
operations need to be filesystem block boundary aligned and cannot
cross the current EOF.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
As discussed at the Plumber's Conference, reserve the bit 0x04 in
fallocate() to prevent collisions with a commonly used out-of-tree
patch which implements the no-hide-stale feature.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Hole punching has already been implemented by XFS and OCFS2, and has the
potential to be implemented on both BTRFS and EXT4 so we need a generic way to
get to this feature. The simplest way in my mind is to add FALLOC_FL_PUNCH_HOLE
to fallocate() since it already looks like the normal fallocate() operation.
I've tested this patch with XFS and BTRFS to make sure XFS did what it's
supposed to do and that BTRFS failed like it was supposed to. Thank you,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds ioctls to vfs for compatibility with legacy XFS
pre-allocation ioctls (XFS_IOC_*RESVP*). The implementation
effectively invokes sys_fallocate for the new ioctls.
Also handles the compat_ioctl case.
Note: These legacy ioctls are also implemented by OCFS2.
[AV: folded fixes from hch]
Signed-off-by: Ankit Jain <me@ankitjain.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fallocate() is a new system call being proposed here which will allow
applications to preallocate space to any file(s) in a file system.
Each file system implementation that wants to use this feature will need
to support an inode operation called ->fallocate().
Applications can use this feature to avoid fragmentation to certain
level and thus get faster access speed. With preallocation, applications
also get a guarantee of space for particular file(s) - even if later the
the system becomes full.
Currently, glibc provides an interface called posix_fallocate() which
can be used for similar cause. Though this has the advantage of working
on all file systems, but it is quite slow (since it writes zeroes to
each block that has to be preallocated). Without a doubt, file systems
can do this more efficiently within the kernel, by implementing
the proposed fallocate() system call. It is expected that
posix_fallocate() will be modified to call this new system call first
and incase the kernel/filesystem does not implement it, it should fall
back to the current implementation of writing zeroes to the new blocks.
ToDos:
1. Implementation on other architectures (other than i386, x86_64,
and ppc). Patches for s390(x) and ia64 are already available from
previous posts, but it was decided that they should be added later
once fallocate is in the mainline. Hence not including those patches
in this take.
2. Changes to glibc,
a) to support fallocate() system call
b) to make posix_fallocate() and posix_fallocate64() call fallocate()
Signed-off-by: Amit Arora <aarora@in.ibm.com>
