Commit Graph

12 Commits

Author SHA1 Message Date
Thomas Gleixner
1ccea77e2a treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not see http www gnu org licenses

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details [based]
  [from] [clk] [highbank] [c] you should have received a copy of the
  gnu general public license along with this program if not see http
  www gnu org licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 355 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 11:28:45 +02:00
Sivakumar Krishnasamy
66aa0678ef ibmveth: Support to enable LSO/CSO for Trunk VEA.
Current largesend and checksum offload feature in ibmveth driver,
 - Source VM sends the TCP packets with ip_summed field set as
   CHECKSUM_PARTIAL and TCP pseudo header checksum is placed in
   checksum field
 - CHECKSUM_PARTIAL flag in SKB will enable ibmveth driver to mark
   "no checksum" and "checksum good" bits in transmit buffer descriptor
   before the packet is delivered to pseries PowerVM Hypervisor
 - If ibmveth has largesend capability enabled, transmit buffer descriptors
   are market accordingly before packet is delivered to Hypervisor
   (along with mss value for packets with length > MSS)
 - Destination VM's ibmveth driver receives the packet with "checksum good"
   bit set and so, SKB's ip_summed field is set with CHECKSUM_UNNECESSARY
 - If "largesend" bit was on, mss value is copied from receive descriptor
   into SKB's gso_size and other flags are appropriately set for
   packets > MSS size
 - The packet is now successfully delivered up the stack in destination VM

The offloads described above works fine for TCP communication among VMs in
the same pseries server ( VM A <=> PowerVM Hypervisor <=> VM B )

We are now enabling support for OVS in pseries PowerVM environment. One of
our requirements is to have ibmveth driver configured in "Trunk" mode, when
they are used with OVS. This is because, PowerVM Hypervisor will no more
bridge the packets between VMs, instead the packets are delivered to
IO Server which hosts OVS to bridge them between VMs or to external
networks (flow shown below),
  VM A <=> PowerVM Hypervisor <=> IO Server(OVS) <=> PowerVM Hypervisor
                                                                   <=> VM B
In "IO server" the packet is received by inbound Trunk ibmveth and then
delivered to OVS, which is then bridged to outbound Trunk ibmveth (shown
below),
        Inbound Trunk ibmveth <=> OVS <=> Outbound Trunk ibmveth

In this model, we hit the following issues which impacted the VM
communication performance,

 - Issue 1: ibmveth doesn't support largesend and checksum offload features
   when configured as "Trunk". Driver has explicit checks to prevent
   enabling these offloads.

 - Issue 2: SYN packet drops seen at destination VM. When the packet
   originates, it has CHECKSUM_PARTIAL flag set and as it gets delivered to
   IO server's inbound Trunk ibmveth, on validating "checksum good" bits
   in ibmveth receive routine, SKB's ip_summed field is set with
   CHECKSUM_UNNECESSARY flag. This packet is then bridged by OVS (or Linux
   Bridge) and delivered to outbound Trunk ibmveth. At this point the
   outbound ibmveth transmit routine will not set "no checksum" and
   "checksum good" bits in transmit buffer descriptor, as it does so only
   when the ip_summed field is CHECKSUM_PARTIAL. When this packet gets
   delivered to destination VM, TCP layer receives the packet with checksum
   value of 0 and with no checksum related flags in ip_summed field. This
   leads to packet drops. So, TCP connections never goes through fine.

 - Issue 3: First packet of a TCP connection will be dropped, if there is
   no OVS flow cached in datapath. OVS while trying to identify the flow,
   computes the checksum. The computed checksum will be invalid at the
   receiving end, as ibmveth transmit routine zeroes out the pseudo
   checksum value in the packet. This leads to packet drop.

 - Issue 4: ibmveth driver doesn't have support for SKB's with frag_list.
   When Physical NIC has GRO enabled and when OVS bridges these packets,
   OVS vport send code will end up calling dev_queue_xmit, which in turn
   calls validate_xmit_skb.
   In validate_xmit_skb routine, the larger packets will get segmented into
   MSS sized segments, if SKB has a frag_list and if the driver to which
   they are delivered to doesn't support NETIF_F_FRAGLIST feature.

This patch addresses the above four issues, thereby enabling end to end
largesend and checksum offload support for better performance.

 - Fix for Issue 1 : Remove checks which prevent enabling TCP largesend and
   checksum offloads.
 - Fix for Issue 2 : When ibmveth receives a packet with "checksum good"
   bit set and if its configured in Trunk mode, set appropriate SKB fields
   using skb_partial_csum_set (ip_summed field is set with
   CHECKSUM_PARTIAL)
 - Fix for Issue 3: Recompute the pseudo header checksum before sending the
   SKB up the stack.
 - Fix for Issue 4: Linearize the SKBs with frag_list. Though we end up
   allocating buffers and copying data, this fix gives
   upto 4X throughput increase.

Note: All these fixes need to be dropped together as fixing just one of
them will lead to other issues immediately (especially for Issues 1,2 & 3).

Signed-off-by: Sivakumar Krishnasamy <ksiva@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21 13:29:01 -04:00
Tobias Klauser
8c2ef1978f net: ibmveth: Remove unused stats member from struct ibmveth_adapter
The ibmveth driver keeps its statistics in net_device->stats, so the
stats member in struct ibmveth_adapter is unused. Remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-27 16:02:00 -07:00
Thomas Falcon
7b5967389f ibmveth: set correct gso_size and gso_type
This patch is based on an earlier one submitted
by Jon Maxwell with the following commit message:

"We recently encountered a bug where a few customers using ibmveth on the
same LPAR hit an issue where a TCP session hung when large receive was
enabled. Closer analysis revealed that the session was stuck because the
one side was advertising a zero window repeatedly.

We narrowed this down to the fact the ibmveth driver did not set gso_size
which is translated by TCP into the MSS later up the stack. The MSS is
used to calculate the TCP window size and as that was abnormally large,
it was calculating a zero window, even although the sockets receive buffer
was completely empty."

We rely on the Virtual I/O Server partition in a pseries
environment to provide the MSS through the TCP header checksum
field. The stipulation is that users should not disable checksum
offloading if rx packet aggregation is enabled through VIOS.

Some firmware offerings provide the MSS in the RX buffer.
This is signalled by a bit in the RX queue descriptor.

Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jonathan Maxwell <jmaxwell37@gmail.com>
Reviewed-by: David Dai <zdai@us.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09 22:47:22 -05:00
Thomas Falcon
07e6a97da1 ibmveth: add support for TSO6
This patch adds support for a new method of signalling the firmware
that TSO packets are being sent. The new method removes the need to
alter the ip and tcp checksums and allows TSO6 support.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-15 21:34:56 -07:00
Thomas Falcon
9c7e8bc584 ibmveth: Add support for Large Receive Offload
Enables receiving large packets from other LPARs. These packets
have a -1 IP header checksum, so we must recalculate to have
a valid checksum.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:46 -04:00
Thomas Falcon
8641dd8579 ibmveth: Add support for TSO
Add support for TSO.  TSO is turned off by default and
must be enabled and configured by the user.  The driver
version number is increased so that users can be sure
that they are using ibmveth with TSO support.

Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:45 -04:00
Thomas Falcon
cd7c7ec368 ibmveth: change rx buffer default allocation for CMO
This patch enables 64k rx buffer pools by default.  If Cooperative
Memory Overcommitment (CMO) is enabled, the number of 64k buffers
is reduced to save memory.

Cc: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30 16:33:45 -04:00
Anton Blanchard
d746ca9561 ibmveth: Fix endian issues with MAC addresses
The code to load a MAC address into a u64 for passing to the
hypervisor via a register is broken on little endian.

Create a helper function called ibmveth_encode_mac_addr
which does the right thing in both big and little endian.

We were storing the MAC address in a long in struct ibmveth_adapter.
It's never used so remove it - we don't need another place in the
driver where we create endian issues with MAC addresses.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06 16:26:41 -05:00
Jeff Kirsher
0ab75ae81d ethernet: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: Santosh Raspatur <santosh@chelsio.com>
CC: Dimitris Michailidis <dm@chelsio.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Santiago Leon <santil@linux.vnet.ibm.com>
CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
CC: Olof Johansson <olof@lixom.net>
CC: Manish Chopra <manish.chopra@qlogic.com>
CC: Sony Chacko <sony.chacko@qlogic.com>
CC: Rajesh Borundia <rajesh.borundia@qlogic.com>
CC: Nicolas Pitre <nico@fluxnic.net>
CC: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 12:37:55 -05:00
Anton Blanchard
0b536be7b9 ibmveth: Fix little endian issues
The hypervisor is big endian, so little endian kernel builds need
to byteswap.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:27 -04:00
Jeff Kirsher
9aa3283595 ehea/ibm*: Move the IBM drivers
Move the IBM drivers into drivers/net/ethernet/ibm/ and make the
necessary Kconfig and Makefile changes.

- Renamed ibm_new_emac to emac
- Cleaned up Makefile and Kconfig options which referred to
  IBM_NEW_EMAC to IBM_EMAC
- ibmlana driver is a National Semiconductor SONIC driver so
  it was not moved

CC: Christoph Raisch <raisch@de.ibm.com>
CC: Santiago Leon <santil@linux.vnet.ibm.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: David Gibson <dwg@au1.ibm.com>
CC: Kyle Lucke <klucke@us.ibm.com>
CC: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11 02:41:59 -07:00