Commit Graph

4546 Commits

Author SHA1 Message Date
洪一竹
692dd19164 Input: elantech - add new icbody type
This adds new icbody type to the list recognized by Elantech PS/2 driver.

Cc: stable@vger.kernel.org
Signed-off-by: Sam Hung <sam.hung@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-04 22:34:39 -07:00
Dmitry Tunin
85919a00e5 Input: focaltech - report finger width to userspace
Focaltech touchpads report finger width in packet[5] of absolute packet.
Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
0xff is reported, when a large contact area is detected.
This can be handled in userspace.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-02 10:46:10 -07:00
Hans de Goede
5f0ee9d17a Input: elantech - fix detection of touchpads where the revision matches a known rate
Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.

Cc: stable@vger.kernel.org
Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-02 10:43:07 -07:00
Florian Echtler
2b7eea83a4 [media] return BUF_STATE_ERROR if streaming stopped during acquisition
When stop_streaming is called while a frame is currently being retrieved, the
buffer being filled will still be returned with BUF_STATE_DONE. By resetting
the sequence number and checking before returning the buffer, it can now
correctly be returned with BUF_STATE_ERROR.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:45:00 -03:00
Florian Echtler
0cfdfcc1db [media] add extra debug output, remove noisy warning
Add dev_dbg statements for easier future debugging; also change the warning
about packet ID mismatches to debug output to avoid flooding the logs. This
warning is only important in a very specific/rare use case when trying to
correlate input events with video data.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:44:35 -03:00
Florian Echtler
da6e4674b0 [media] add frame size/frame rate query functions
Add missing functions to query the single fixed frame size (960x540) and
supported frame rates. Technically, the SUR40 supports any arbitrary frame
rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we
just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:44:10 -03:00
Florian Echtler
ca27ab3159 [media] reduce poll interval to allow full 60 FPS framerate
The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth,
one raw frame will take about 11 ms to transmit. If the poll interval is above
5 ms, fully handling one frame will take longer than 16 ms and the overall
frame rate will drop below 60 FPS. To get the full frame rate without blocking
all the time and still allowing for a bit of timing jitter, we reduce the poll
interval to 4 ms.

Signed-off-by: Martin Kaltenbrunner <modin@yuri.at>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:43:09 -03:00
Luis R. Rodriguez
9c27847dda kernel/params: constify struct kernel_param_ops uses
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.

In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.

Test compiled on x86_64 against:

	* allnoconfig
	* allmodconfig
	* allyesconfig

@ const_found @
identifier ops;
@@

const struct kernel_param_ops ops = {
};

@ const_not_found depends on !const_found @
identifier ops;
@@

-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};

Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:10 +09:30
Shailendra Verma
e002273b37 Input: synaptics_i2c - use proper boolean values
The variable no_decel is bool type so assigning "true" instead of "1".
Also, synaptics_i2c_get_input() has bool return type, so let's use "false"
there.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-26 14:16:11 -07:00
Shailendra Verma
feb9eba80c Input: psmouse - use true instead of 1 for boolean values
The variable psmouse_smartscroll is bool type so assigning true
instead of 1.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-26 14:16:10 -07:00
Shailendra Verma
7debcbb135 Input: cyapa - fix a few typos in comments
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-26 14:16:09 -07:00
Dmitry Torokhov
e4b88e1989 Input: stmpe-ts - enforce device tree only mode
The STMPE MFD is only used with device tree configured systems (and STMPE
MFD core depends on OF), so force the configuration to come from device
tree only.

Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-26 14:16:08 -07:00
Dmitry Torokhov
f91a3f08b7 Input: stmpe-ts - fix automatic module loading
When STMPE is instantiated via device tree individual MFD cells rae formed
with OF modaliases, not platform modaliases, and so we need to add OF
device table to the driver if we want it to load automatically:

of:Nstmpe_touchscreenT<NULL>Cst,stmpe-ts

Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-22 15:30:11 -07:00
Linus Torvalds
1d82b0baf9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem.

  The main change is that we tell joydev not to touch "absolute mice",
  such as VMware virtual mouse, as that produced bad result (cursor
  stuck in upper right corner) with games"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: smtpe-ts - wait 50mS until polling for pen-up
  Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
  Input: joydev - don't classify the vmmouse as a joystick
  Input: vmmouse - do not reference non-existing version of X driver
  Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad
  Input: elantech - fix semi-mt protocol for v3 HW
  Input: sx8654 - fix memory allocation check
2015-05-22 14:49:55 -07:00
Rajeev Kumar
25d238b226 Input: update email-id of Rajeev Kumar
rajeev-dlh.kumar@st.com email-id doesn't exist anymore as I have left the
company.

Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-22 10:59:55 -07:00
Khem Raj
bde304575f Input: sentelic - use "static inline" instead of "inline"
gcc-5 defaults to gnu11 which used c99 inline semantics in c99 'inline' is
not externally visible unlike gnu89, therefore we use 'static inline' which
has same semantics between gnu89 and c99

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-22 10:59:54 -07:00
Marek Vasut
77b071e793 Input: smtpe-ts - wait 50mS until polling for pen-up
Wait a little bit longer, 50mS instead of 20mS, until the driver starts
polling for pen-up. The problematic behavior before this patch is applied
is as follows. The behavior was observed on the STMPE610QTR controller.

Upon a physical pen-down event, the touchscreen reports one set of x-y-p
coordinates and a pen-down event. After that, the pen-up polling is
triggered and since the controller is not ready yet, the polling mistakenly
detects a pen-up event while the physical state is still such that the pen
is down on the touch surface.

The pen-up handling flushes the controller FIFO, so after that, all the
samples in the controller are discarded. The controller becomes ready
shortly after this bogus pen-up handling and does generate again a pen-down
interrupt. This time, the controller contains x-y-p samples which all read
as zero. Since pressure value is zero, this set of samples is effectively
ignored by userland.

In the end, the driver just bounces between pen-down and bogus pen-up
handling, generating no useful results. Fix this by giving the controller a
bit more time before polling it for pen-up.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21 17:06:13 -07:00
Marek Vasut
e686e9e156 Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much
more explicit about it's behavior. We want to schedule the task 20 mS from
now, so make it explicit in the code.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21 17:05:48 -07:00
Laurent Pinchart
3a38958d24 Input: adxl34x - add OF match support
The I2C subsystem can match devices without explicit OF support based on
the part of their compatible property after the comma. However, this
mechanism uses the first compatible value only. For adxl34x OF device
nodes the compatible property will contain the more specific
"adi,adxl345" or "adi,adxl346" value first. This prevents the device
node from being matched with the adxl34x driver.

Fix this by adding an OF match table with an "adi,adxl345" compatible
entry. There's no need to add the "adi,adxl346" entry as the ADXL346 is
backward-compatible with the ADXL345 with differences handled by runtime
detection of the device model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21 16:58:02 -07:00
Dmitry Torokhov
b53d750884 Input: cyapa - do not set otherwise unused variable
As the name suggests, always_unused argument in cyapa_gen3_set_power_mode()
is never used, so there is no reason for setting it to 0.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21 15:59:23 -07:00
Thomas Hellstrom
15397f153c Input: joydev - don't classify the vmmouse as a joystick
Joydev is currently thinking some absolute mice are joystick, and that
messes up games in VMware guests, as the cursor typically gets stuck in
the top left corner.

Try to detect the event signature of a VMmouse input device and back off
for such devices. We're still incorrectly detecting, for example, the
VMware absolute USB mouse as a joystick, but adding an event signature
matching also that device would be considerably more risky, so defer that
to a later merge window.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-21 15:58:27 -07:00
Dmitry Torokhov
c37f6d3879 Input: atmel_mxt_ts - use BIT() macro when reporting button state
This makes the intent a tad more clear.

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:49:36 -07:00
Thomas Hellstrom
412dbad2c7 Input: vmmouse - do not reference non-existing version of X driver
The vmmouse Kconfig help text was referring to an incorrect user-space
driver version. Fix this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:47:26 -07:00
Hans de Goede
72eceab743 Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad
On v7 touchpads sometimes when 2 fingers are moved down on the touchpad
until they "fall of" the touchpad, the second touch will report 0 for y
(max y really since the y axis is inverted) and max x as coordinates,
rather then reporting 0, 0 as is expected for a non touching finger.

This commit detects this and treats these touches as non touching.

See the evemu-recording here:
https://bugzilla.redhat.com/attachment.cgi?id=1025058

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1221200
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:46:02 -07:00
Hans de Goede
dccf1dd845 Input: alps - use the generic process_bitmap function for v5 touchpads
Now that the generic process_bitmap function has been improved to offer
accurate coordinates for the first touch we can use it for v5 (dolphin)
touchpads too.

Besides being a nice code cleanup this also fixes the saw tooth pattern
in the coordinates for the second touch the dolphin specific version had.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:45 -07:00
Hans de Goede
688ea364b2 Input: alps - rename alps_set_abs_params_mt to alps_set_abs_params_semi_mt
Rename alps_set_abs_params_mt to alps_set_abs_params_semi_mt,
to make it clear that it is only (to be) used for semi-mt devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:45 -07:00
Hans de Goede
1662c03387 Input: alps - do not use input-mt finger tracking for semi-mt devices
With the recent process_bitmap() changes all semi-mt devices always report
the first finger down in slot 0, so stop using input-mt finger tracking
for these.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:44 -07:00
Hans de Goede
4dd2657307 Input: alps - use more accurate coordinates for first touch in semi-mt mode
All alps semi-mt touchpads give us the following data when 2 (or more)
fingers are touching: 1 more or less accurate touch for the first finger
down, and a bitmap with columns and rows in which 1 or more fingers are
seen resulting in a crude (low res) bounding box.

So far for v3, rushmore and v4 touchpads we've been reporting the
coordinates of 2 opposite corners of the box when 2 fingers are touching.
Ignoring the much better resolution data given in the normal position
packet.

This commit actually uses this data for the first touch, figures out which
corner of the bounding box is closest to the first touch, and reports the
coordinates of the opposite corner for the second touch, resulting in
much better data for the first touch and for the single touch
pointer-emulation events.

This approach is similar to the one in alps_process_bitmap_dolphin, that
function takes the single accurate touch info, calculates the distance to
the center of the bounding box, and then puts the 2nd touch mirrored to
the center. The downside of that approach is that if both touches move
slowly in the same direction, the bounding box will stay the same for a
while (as it is low res) and the second touch will thus been seen moving
in the opposite direction until the bounding box actually changes, and
then the second touch snaps to its new position resulting in a saw tooth
pattern in the coordinates for the second touch, hence this new approach.

This commit fixes 2 finger scrolling being choppy / jumpy on these
touchpads.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:44 -07:00
Hans de Goede
44b77f38dc Input: alps - decode the position packet first
We should decode the position packet before the packet with the bitmap
data.  This way we can use the more accurate position info in
process_bitmap() to get better results.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:43 -07:00
Hans de Goede
a839cd579b Input: alps - only set fields that are actually present
Pinnacle / Rushmore packets contain either position info, or bitmap info,
never both. So far we've in essence been storing garbage in the position /
bitmap fields of the fields struct when decoding a bitmap / pos packet.

We've been relying on the following sequence to get away with this:

1) Decode bitmap packet
2) Process bitmap packet
3) Decode position packet
4) Use position / button info

This patch allows us to change this sequence, which will allow using the
position info when processing the bitmap for more accurate results.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:43 -07:00
Hans de Goede
aab9cf7b03 Input: alps - change alps_decode_rushmore to do all decoding itself
Change alps_decode_rushmore to do all decoding itself, rather then relying
on alps_decode_pinnacle and then overriding some fields + or-ing in some
bits.

This is a preparation patch for modifying the decode functions to properly
differentiate between position and bitmap packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:42 -07:00
Shailendra Verma
4e3e4629e4 Input: ff-core - fix typo in comment to input_ff_erase()
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:42 -07:00
Shailendra Verma
ec8beff964 Input: fix typo in comment to input_handler_for_each_handle()
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:41 -07:00
Fabio Estevam
ca8ff6ac45 Input: wm831x-on - pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:42 -07:00
Fabio Estevam
4be01a2935 Input: twl6040-vibra - pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:41 -07:00
Fabio Estevam
6b36d8f6a2 Input: retu-pwrbutton - pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:41 -07:00
Fabio Estevam
5f4eedef77 Input: twl4030-pwrbutton - pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:40 -07:00
Evgeniy Dushistov
68aeee98ee Input: max7359_keypad - switch to using matrix_keypad_build_keymap()
max7359_build_keycode() does the same thing as matrix_keypad_build_keymap(),
but the latter can also handle DT bindings.

Tested on beagleboard-xm.

Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:40 -07:00
Evgeniy Dushistov
ee3514b225 Input: max7359_keypad - do not set MAX7359_CFG_INTERRUPT flag
In datasheet of max7359 there is the following description of this flag:

0 - INT cleared when FIFO empty,
1 - INT cleared after host read. In this mode, I2C should read
    FIFO until interrupt condition removed, or further INT may be lost.

So, if we set this flag, we have to read FIFO until it becomes empty. But
in interrupt we read FIFO just once.  This lead to "keyboard" hang until
reboot, if we press several keys, because of interrupt handler read just
one "press" from FIFO and clear interrupt.

Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:39 -07:00
Pekka Enberg
67367fd259 Input: evdev - use kvfree() in evdev_release()
Use kvfree() instead of open-coding it.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-15 15:58:39 -07:00
Benjamin Tissoires
3c0213d17a Input: elantech - fix semi-mt protocol for v3 HW
When the v3 hardware sees more than one finger, it uses the semi-mt
protocol to report the touches. However, it currently works when
num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1
finger as if num_fingers was 1.

This confuses userspace which knows how to deal with extra fingers
when all the slots are used, but not when some are missing.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13 10:31:22 -07:00
Wei Yongjun
6dd063353f Input: soc_button_array - remove duplicated include
Remove duplicated include for acpi.h.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13 10:30:18 -07:00
Wei Yongjun
755bab5b80 Input: zforce - remove duplicated include
Remove duplicated include for delay.h.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Heiko Stuebner <heiko.stuebner@bq.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13 10:30:13 -07:00
Dmitry Torokhov
22ffc3e42a Input: sx8654 - fix memory allocation check
We have been testing wrong variable when trying to make sure that input
allocation succeeded.

Reported by Coverity (CID 1295918).

Acked-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-13 10:29:33 -07:00
Dan Murphy
4d10da1346 Input: add TI drv2665 haptics driver
Add the TI drv2665 piezo haptic driver.  This haptics IC requires the data
to be streamed to the FIFO for continuous output.

Datasheet can be found at:
http://www.ti.com/product/drv2665

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-08 16:45:16 -07:00
Dan Murphy
8a4dda79a3 Input: ff-core - fix spelling mistake in ff-core
Fix spelling of magnitude
s/manginude/magnitude

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-08 16:35:58 -07:00
Dan Murphy
c857ea9e1c Input: drv2667 - fix Kconfig error for help screen
Fix the Kconfig for the drv2667 as there was a copy/paste error.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-08 16:35:57 -07:00
Marek Vasut
9ceeb59c5f Input: smtpe-ts - wait 50mS until polling for pen-up
Wait a little bit longer, 50mS instead of 20mS, until the driver starts
polling for pen-up. The problematic behavior before this patch is applied
is as follows. The behavior was observed on the STMPE610QTR controller.

Upon a physical pen-down event, the touchscreen reports one set of x-y-p
coordinates and a pen-down event. After that, the pen-up polling is
triggered and since the controller is not ready yet, the polling mistakenly
detects a pen-up event while the physical state is still such that the pen
is down on the touch surface.

The pen-up handling flushes the controller FIFO, so after that, all the
samples in the controller are discarded. The controller becomes ready
shortly after this bogus pen-up handling and does generate again a pen-down
interrupt. This time, the controller contains x-y-p samples which all read
as zero. Since pressure value is zero, this set of samples is effectively
ignored by userland.

In the end, the driver just bounces between pen-down and bogus pen-up
handling, generating no useful results. Fix this by giving the controller a
bit more time before polling it for pen-up.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-07 22:30:18 -07:00
Marek Vasut
8f6bcc97ab Input: smtpe-ts - use msecs_to_jiffies() instead of HZ
Use msecs_to_jiffies(20) instead of plain (HZ / 50), as the former is much
more explicit about it's behavior. We want to schedule the task 20 mS from
now, so make it explicit in the code.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-07 22:30:17 -07:00
Krzysztof Kozlowski
3419e49a0e Input: s3c2410_ts - constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06 16:56:55 -07:00
Krzysztof Kozlowski
8550b07371 Input: samsung-keypad - constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06 16:56:55 -07:00
Paul Cercueil
5f6f117c12 Input: goodix - check the 'buffer status' bit before reading data
The MSB of the first byte read via I2C at the coordinates address
indicates whether the data is valid or ready (called "buffer status" in
the datasheets) when an interrupt is raised. Previously, this bit was
ignored, which resulted in a lot of incorrect detections of "finger
removed" events.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06 16:54:25 -07:00
Guido Martínez
c615dcb6d1 Input: adp5589-keys - fix event count mask
The event mask was specified as 0xF (4 bits) when in reality is 0x1F (5
bits) in order to be capable of representing all FIFO length values from
0 to 16.

This caused a problem: when the keypad reported 16 pending events the
driver took it as 0, and did nothing. This in turn caused the keypad to
re-issue the interrupt over and over again.

Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06 16:39:28 -07:00
Guido Martínez
195e610bf7 Input: adp5589-keys - fix pull mask setting
The pull mask is created by looping each row (column) and building an
8-bit integer with the configuration. It is written byte-by-byte, when
we reach the end of the rows (columns) or we're at the 3rd line (which
finishes the first byte, since each pin is 2bits on the mask).

However, this only works if we have at most 8 pins (2 bytes), which is
not the case for the ADP5589. So, write the byte at each boundary (every
4 rows/columns).

Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06 16:39:28 -07:00
Rasmus Villemoes
429b474990 tty: remove buf parameter from tty_name()
tty_name no longer uses the buf parameter, so remove it along with all
the 64 byte stack buffers that used to be passed in.

Mostly generated by the coccinelle script

@depends on patch@
identifier buf;
constant C;
expression tty;
@@
- char buf[C];
  <+...
- tty_name(tty, buf)
+ tty_name(tty)
  ...+>

allmodconfig compiles, so I'm fairly confident the stack buffers
weren't used for other purposes as well.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:26:57 +02:00
Geert Uytterhoeven
ef403bcaf1 [media] Input: TOUCHSCREEN_SUR40 should depend on HAS_DMA
If NO_DMA=y:

    warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)

    ERROR: "dma_unmap_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_map_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "dma_sync_sg_for_cpu" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!

TOUCHSCREEN_SUR40 selects VIDEOBUF2_DMA_SG, which bypasses its
dependency on HAS_DMA.  Make TOUCHSCREEN_SUR40 depend on HAS_DMA to fix
this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 07:12:51 -03:00
Linus Torvalds
36a8032d77 platform/chrome: Updates for v4.1
Here's a set of updates to the Chrome OS platform drivers for this merge window.
 
 Main new things this cycle is:
 
 - Driver changes to expose the lightbar to users. With this, you can make your
   own blinkenlights on Chromebook Pixels.
 - Changes in the way that the atmel_mxt trackpads are probed. The laptop driver
   is trying to be smart and not instantiate the devices that don't answer to
   probe. For the trackpad that can come up in two modes (bootloader or regular),
   this gets complicated since the driver already knows how to handle the two
   modes including the actual addresses used. So now the laptop driver needs to
   know more too, instantiating the regular address even if the bootloader one
   is the probe that passed.
 - mfd driver improvements by Javier Martines Canillas, and a few bugfixes
   from him, kbuild and myself.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVOyVhAAoJEIwa5zzehBx3U/gP/jEqIMKEB6r0qApnYLU/0v2V
 6AiAtQBDZ6PSNDOqy5Mo5HoMQ0WI09n4xvml3Ntmx0/584RGECn8nlFvwlowIxNo
 FLGYcKWuy8w8wKgN19hhEYySnTEex4+kBuDTITvya61SpvxUUfu7fpGV+DXwM2CS
 aJQdMOwl24BJ4gjev9JS5QasyZrAzZVuDwo8vSKG6PKZNGgC1uyjOrm+NjiTEW15
 FzCk77rRHfiN6Zr9C79ZfqV/nWKm4rPvaJJOiNr2vZUQ/0bhbvSHp3/BekjtnlOv
 W6GbUCoDT6/DU/p1SP2Yegqk5pOEcqKQFe7Uc3YDSfiNLNCp03nF1RuIoi/NzfDy
 1GcLYWAvHCrtmpQwqM/gIgc9uAsFN9Stin2G79xt3U/dUitdAmwMsCfqDE1FO63e
 pGjPx0H7e1Ot3en3O5agaAlYlsokptKl3bIVOMfK6s6bH3RK4Y83LxwsVQKYkayA
 TyulczOPnx6i4+acQroIwpFTj8QhhNjjhBU5gXTebVj4B/CwfieZBadaYF23O765
 shX71oUJ1gQ6LCZtu8brl/82uk3sSkpVDi8e5WWaSnLfnAmqtU/ITy5yg77uuD0b
 RAdHxVFUO6Y0FspWmWzBckrPec7ub+SKglCACq8HNciGx/9BWx6NUWI9FK93CDIu
 O36D/l9hoUvA0gds5Iom
 =NVa4
 -----END PGP SIGNATURE-----

Merge tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform

Pull chrome platform updates from Olof Johansson:
 "Here's a set of updates to the Chrome OS platform drivers for this
  merge window.

  Main new things this cycle is:

   - Driver changes to expose the lightbar to users.  With this, you can
     make your own blinkenlights on Chromebook Pixels.

   - Changes in the way that the atmel_mxt trackpads are probed.  The
     laptop driver is trying to be smart and not instantiate the devices
     that don't answer to probe.  For the trackpad that can come up in
     two modes (bootloader or regular), this gets complicated since the
     driver already knows how to handle the two modes including the
     actual addresses used.  So now the laptop driver needs to know more
     too, instantiating the regular address even if the bootloader one
     is the probe that passed.

   - mfd driver improvements by Javier Martines Canillas, and a few
     bugfixes from him, kbuild and myself"

* tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  platform/chrome: chromeos_laptop - instantiate Atmel at primary address
  platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST
  platform/chrome: cros_ec_lpc - Include linux/io.h header file
  platform/chrome: fix platform_no_drv_owner.cocci warnings
  platform/chrome: cros_ec_lightbar - fix duplicate const warning
  platform/chrome: cros_ec_dev - fix Unknown escape '%' warning
  platform/chrome: Expose Chrome OS Lightbar to users
  platform/chrome: Create sysfs attributes for the ChromeOS EC
  mfd: cros_ec: Instantiate ChromeOS EC character device
  platform/chrome: Add Chrome OS EC userspace device interface
  platform/chrome: Add cros_ec_lpc driver for x86 devices
  mfd: cros_ec: Add char dev and virtual dev pointers
  mfd: cros_ec: Use fixed size arrays to transfer data with the EC
2015-04-26 13:36:02 -07:00
Linus Torvalds
b8ce8d7222 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input subsystem updates from Dmitry Torokhov:

 - an update to Atmel MXT driver that makes it functional on Google
   Pixel 2 boxes (both touchpad and touchscreen)

 - a new VMware VMMouse driver that should allow us drop X vmmouse
   driver that requires root privileges (since it accesses ioports)

 - XBox One controllers now support force feedback (rumble)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: lm8333 - fix broken email address
  Input: cyapa - fix setting suspend scan rate
  Input: elan_i2c - fix calculating number of x and y traces.
  Input: elan_i2c - report hovering contacts
  Input: elants_i2c - zero-extend hardware ID in firmware name
  Input: alps - document separate pointstick button bits for V2 devices
  Input: atmel_mxt_ts - add support for Google Pixel 2
  Input: xpad - add rumble support for Xbox One controller
  Input: ff-core - use new debug macros
  Input: add vmmouse driver
  Input: elan_i2c - adjust for newer firmware pressure reporting
2015-04-21 12:54:08 -07:00
Dmitry Torokhov
48853389f2 Merge branch 'next' into for-linus
Prepare second round of updates for 4.1 merge window.
2015-04-21 11:12:42 -07:00
Mauro Carvalho Chehab
64131a87f2 Merge branch 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux into v4l_for_linus
* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
  media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
  hexdump: avoid warning in test function
  fs: take i_mutex during prepare_binprm for set[ug]id executables
  smp: Fix error case handling in smp_call_function_*()
  iommu-common: Fix PARISC compile-time warnings
  sparc: Make LDC use common iommu poll management functions
  sparc: Make sparc64 use scalable lib/iommu-common.c functions
  Break up monolithic iommu table/lock into finer graularity pools and lock
  sparc: Revert generic IOMMU allocator.
  tools/power turbostat: correct dumped pkg-cstate-limit value
  tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
  tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
  tools/power turbostat: Initial Skylake support
  tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
  tools/power turbostat: modprobe msr, if needed
  tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
  tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
  Bluetooth: hidp: Fix regression with older userspace and flags validation
  config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
  perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
  ...

That solves several merge conflicts:
	Documentation/DocBook/media/v4l/subdev-formats.xml
	Documentation/devicetree/bindings/vendor-prefixes.txt
	drivers/staging/media/mn88473/mn88473.c
	include/linux/kconfig.h
	include/uapi/linux/media-bus-format.h

The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.
2015-04-21 09:44:55 -03:00
Wolfram Sang
c9eeb5084b Input: lm8333 - fix broken email address
My Pengutronix address is not valid anymore, redirect people to the
Pengutronix kernel team.

Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20 10:30:10 -07:00
Dudley Du
a333a03ce9 Input: cyapa - fix setting suspend scan rate
The suspend scan rate value should not exceed 1000, unfortunately when
implementing the limit we used max_t instead of min_t, causing the value to
be at least 1000.

Signed-off-by: Dudley Du <dudl@cypress.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20 10:30:09 -07:00
Duson Lin
9f423801c9 Input: elan_i2c - fix calculating number of x and y traces.
According to Elan's firmware engineers we should not be subtracting 1 form
the raw number of x and y traces so that the pitch size is correct. For
example, if the touchpad x resolution is 2800 and x trace number is 20,
the pitch size of x should be 2800/20 = 140, not 2800/19 = 147.36.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20 10:30:09 -07:00
Duson Lin
090ad32506 Input: elan_i2c - report hovering contacts
When hover is detected report ABS_MT_DISTANCE as 1; for active contacts
the distance is reported as 0.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20 10:28:30 -07:00
Dmitry Torokhov
8c0776a8f0 Input: elants_i2c - zero-extend hardware ID in firmware name
Let's zero-extend hardware id number when forming firmware file name,
to avoid kernel requesting firmware like "elants_i2c_   0.bin", which
is quite unexpected.

Acked-by: Charlie Mooney<charliemooney@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-20 10:28:21 -07:00
Linus Torvalds
510965dd4a This is the bulk of GPIO changes for the v4.1 development
cycle:
 
 - A new GPIO hogging mechanism has been added. This can
   be used on boards that want to drive some GPIO line high,
   low, or set it as input on boot and then never touch it
   again. For some embedded systems this is bliss and
   simplifies things to a great extent.
 
 - Some API cleanup and closure: gpiod_get_array() and
   gpiod_put_array() has been added to get and put GPIOs
   in bulk as was possible with the non-descriptor API.
 
 - Encapsulate cross-calls to the pin control subsystem in
   <linux/gpio/driver.h>. Now this should be the only header
   any GPIO driver needs to include or something is wrong.
   Cleanups restricting drivers to this include are welcomed
   if tested.
 
 - Sort the GPIO Kconfig and split it into submenus, as
   it was becoming and unstructured, illogical and
   unnavigatable mess. I hope this is easier to follow.
   Menus that require a certain subsystem like I2C can
   now be hidden nicely for example, still working on
   others.
 
 - New drivers:
 
     - New driver for the Altera Soft GPIO.
 
     - The F7188x driver now handles the F71869 and
       F71869A variants.
 
     - The MIPS Loongson driver has been moved to
       drivers/gpio for consolidation and cleanup.
 
 - Cleanups:
 
    - The MAX732x is converted to use the GPIOLIB_IRQCHIP
      infrastructure.
 
    - The PCF857x is converted to use the GPIOLIB_IRQCHIP
      infrastructure.
 
    - Radical cleanup of the OMAP driver.
 
 - Misc:
 
    - Enable the DWAPB GPIO for all architectures. This is
      a "hard IP" block from Synopsys which has started to
      turn up in so diverse architectures as X86 Quark, ARC
      and a slew of ARM systems. So even though it's not an
      expander, it's generic enough to be available for all.
 
    - We add a mock GPIO on Crystalcove PMIC after a long
      discussion with Daniel Vetter et al, tracing back to
      the shootout at the kernel summit where DRM drivers
      and sub-componentization was discussed. In this case
      a mock GPIO is assumed to be the best compromise
      gaining some reuse of infrastructure without making
      DRM drivers overly complex at the same time. Let's
      see.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVMNYHAAoJEEEQszewGV1zSmwP/2oCk4CB4fexrqM+irUJrDnT
 3D/8tuaq7EghMnwPXCfHa8R8eWF6XEDvHPcJNVgXiWbtCGRMpdsiobFunzwLQv5A
 CbcuAOzWmzA0ePbfa0+xpLpWM/RJP9u1an/RboIzeeS7oQ1Yj/VjF8uS8Se+Pe3r
 nPKvTpoU5lGpIUTEEYjiJhL8pBmp8k75a6NGM4U8VwXI9BsdhDkpRGsfG3NK8hs2
 vSvWDB19NCW6iOd3gN4KA4f0Zz57WONMS7jY2WaipqYRlr37o4i2CA0ME1xoXEfg
 3JT1lmg7esNCvnjQOaGTaM6nf66j7/nleNtnMmAAJcJeMNoh9yS6397TGaYFThsn
 C1WmAoaonor3RAujrL3oRenxfq2+Vl63OvsClDiWz7LL9YYJ/G2nS3MggFHpZUhu
 /CHXSt08j0Kewfc5SkvFCTnrPG7aWy/YDou6PfuXIvkFp5h1FXDkHTXvOD33turD
 ohEPlg/9i2uCnVQfN+GV4h69WSyEiOpxG5W7ryE+nIo6XzWIctHLIH2V6aE7YrwG
 FBg7hC1QV1cI776HFOuM4rPwG1N80IQeC3vr5z/jEtZVPXrIaGvupxFC+O1DAx4W
 rzBD8lX45B96WmIW2odg11KXXyPO1srW4ZFWghm95HTfvnQc3O6LmV9riv1k7DYA
 gR+aRYNiLO01UmoTPYbK
 =QFbC
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.1 development cycle:

   - A new GPIO hogging mechanism has been added.  This can be used on
     boards that want to drive some GPIO line high, low, or set it as
     input on boot and then never touch it again.  For some embedded
     systems this is bliss and simplifies things to a great extent.

   - Some API cleanup and closure: gpiod_get_array() and
     gpiod_put_array() has been added to get and put GPIOs in bulk as
     was possible with the non-descriptor API.

   - Encapsulate cross-calls to the pin control subsystem in
     <linux/gpio/driver.h>.  Now this should be the only header any GPIO
     driver needs to include or something is wrong.  Cleanups
     restricting drivers to this include are welcomed if tested.

   - Sort the GPIO Kconfig and split it into submenus, as it was
     becoming and unstructured, illogical and unnavigatable mess.  I
     hope this is easier to follow.  Menus that require a certain
     subsystem like I2C can now be hidden nicely for example, still
     working on others.

   - New drivers:

       - New driver for the Altera Soft GPIO.

       - The F7188x driver now handles the F71869 and F71869A variants.

       - The MIPS Loongson driver has been moved to drivers/gpio for
         consolidation and cleanup.

   - Cleanups:

       - The MAX732x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - The PCF857x is converted to use the GPIOLIB_IRQCHIP
         infrastructure.

       - Radical cleanup of the OMAP driver.

   - Misc:

       - Enable the DWAPB GPIO for all architectures.  This is a "hard
         IP" block from Synopsys which has started to turn up in so
         diverse architectures as X86 Quark, ARC and a slew of ARM
         systems.  So even though it's not an expander, it's generic
         enough to be available for all.

       - We add a mock GPIO on Crystalcove PMIC after a long discussion
         with Daniel Vetter et al, tracing back to the shootout at the
         kernel summit where DRM drivers and sub-componentization was
         discussed.  In this case a mock GPIO is assumed to be the best
         compromise gaining some reuse of infrastructure without making
         DRM drivers overly complex at the same time.  Let's see"

* tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits)
  Revert "gpio: sch: use uapi/linux/pci_ids.h directly"
  gpio: dwapb: remove dependencies
  gpio: dwapb: enable for ARC
  gpio: removing kfree remove functionality
  gpio: mvebu: Fix mask/unmask managment per irq chip type
  gpio: split GPIO drivers in submenus
  gpio: move MFD GPIO drivers under their own comment
  gpio: move BCM Kona Kconfig option
  gpio: arrange SPI Kconfig symbols alphabetically
  gpio: arrange PCI GPIO controllers alphabetically
  gpio: arrange I2C Kconfig symbols alphabetically
  gpio: arrange Kconfig symbols alphabetically
  gpio: ich: Implement get_direction function
  gpio: use (!foo) instead of (foo == NULL)
  gpio: arizona: drop owner assignment from platform_drivers
  gpio: max7300: remove 'ret' variable
  gpio: use devm_kzalloc
  gpio: sch: use uapi/linux/pci_ids.h directly
  gpio: x-gene: fix devm_ioremap_resource() check
  gpio: loongson: Add Loongson-3A/3B GPIO driver support
  ...
2015-04-18 08:22:10 -04:00
Dmitry Torokhov
4f8d808889 Input: atmel_mxt_ts - add support for Google Pixel 2
This change allows atmel_mxt_ts to bind to ACPI-enumerated devices in
Google Pixel 2 (2015).

While newer version of ACPI standard allow use of device-tree-like
properties in device descriptions, the version of ACPI implemented in
Google BIOS does not support them, and we have to resort to DMI data to
specify exact characteristics of the devices (touchpad vs. touchscreen,
GPIO to button mapping, etc).

Pixel 1 continues to use i2c devices and platform data created by
chromeos-laptop driver, since ACPI does not enumerate them.

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-15 10:52:48 -07:00
Linus Torvalds
8691c130fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
 "You will get the following new drivers:

   - Qualcomm PM8941 power key drver
   - ChipOne icn8318 touchscreen controller driver
   - Broadcom iProc touchscreen and keypad drivers
   - Semtech SX8654 I2C touchscreen controller driver

  ALPS driver now supports newer SS4 devices; Elantech got a fix that
  should make it work on some ASUS laptops; and a slew of other
  enhancements and random fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: alps - non interleaved V2 dualpoint has separate stick button bits
  Input: alps - fix touchpad buttons getting stuck when used with trackpoint
  Input: atkbd - document "no new force-release quirks" policy
  Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
  Input: ALPS - V7 devices can report 5-finger taps
  Input: ALPS - add support for SS4 touchpad devices
  Input: ALPS - refactor alps_set_abs_params_mt()
  Input: elantech - fix absolute mode setting on some ASUS laptops
  Input: atmel_mxt_ts - split out touchpad initialisation logic
  Input: atmel_mxt_ts - implement support for T100 touch object
  Input: cros_ec_keyb - fix clearing keyboard state on wakeup
  Input: gscps2 - drop pci_ids dependency
  Input: synaptics - allocate 3 slots to keep stability in image sensors
  Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
  Input: MT - make slot assignment work for overcovered solutions
  mfd: tc3589x: enforce device-tree only mode
  Input: tc3589x - localize platform data
  Input: tsc2007 - Convert msecs to jiffies only once
  Input: edt-ft5x06 - remove EV_SYN event report
  Input: edt-ft5x06 - allow to setting the maximum axes value through the DT
  ...
2015-04-14 18:25:15 -07:00
Linus Torvalds
f0c1bc95a1 == Changes to existing drivers ==
- Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
    - Rename child driver [max77693-flash => max77693-led]; max77693
    - Error handling fixes; intel_soc_pmic
    - GPIO tweaking; intel_soc_pmic
    - Remove non-DT code; vexpress-sysreg, tc3589x
    - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
                                 rtc-s5m, sec-core, max77693, menelaus,
                                 wm5102-tables
    - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
                      mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
                      lpc_ich, menelaus, twl6040
    - Update register/address values; rts5227, rts5249
    - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
                                         qcom-rpm, qcom-spmi-pmic
    - Couple of trivial core Kconfig fixups
    - Remove use of seq_printf return value; ab8500-debugfs
    - Remove __exit markups; menelaus, tps65010
    - Fix platform-device name collisions; mfd-core
 
  == New drivers/supported devices ==
    - Add support for wm8280/wm8281 into arizona
    - Add support for COMe-cBL6 into kempld-core
    - Add support for rts524a and rts525a into rts5249
    - Add support for ipq8064 into qcom_rpm
    - Add support for extcon into axp20x
    - New MediaTek MT6397 PMIC driver
    - New Maxim MAX77843 PMIC dirver
    - New Intel Quark X1000 I2C-GPIO driver
    - New Skyworks SKY81452 driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVLQlhAAoJEFGvii+H/HdhnSYP/i7h+0/uvI32+49XlQWO/zZv
 SIcnNcekSj/8MIIpSOZftY+ejdqyo8NHY0dvNTmxekY65ov/yXA6aJGDd5rr3xyL
 hd9E5e5nwxc4UTV2kJwPBgCIKIjx/idRgOMTEpIa1v4KY8Gn43xc81X4s+BusbCE
 WK8hPdBUePRDmMLrRzhkVHqrfeMSSLN5Z/fhmQehWqahE1asPZ2FOnTC6tFlGxgm
 I55FAMvWey+qv4g28+nQrC9RQMetCL2f/6o53jMEQoaRQdJbbrxMybBnNvpcXwbR
 JECPiV+2R0EqBd3xiT2gbPLAqmMDexIP1Cybh3BBRcFveJeJGqmMCFwMio6kotkA
 IIMlYNcwczufPVWIIqz3U2OtJ5EWzxPgco2aA4a1Ej1nbUC29o829fMahZY0SR8m
 O2zX/MpmYPZCg3mHOFQ4oPwalIM7oKv79NTV25Ks9r+rv+zNaBc8TPCE/Oxkxfj8
 IdJ/vKQaKMmMZA1THO8HMK9qAQV7vZL12XquVzrAgq40RZa+nOUXEk0J0rHI0VaO
 BHNMBv1D3iNQfR7cWAappDavhoZcFtIY/Z9x7OsLYm/W8+CxhdAafMNH0AJPlfts
 NR7RoNtStumXdq6QzDdA27Mp1sXkHz/kgGMVE4t9mdLVmD9C0MqVi8VPFUN+sST0
 vAKAhQ/cnXCKVxe6I9/3
 =QPNn
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:

   - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
   - Rename child driver [max77693-flash => max77693-led]; max77693
   - Error handling fixes; intel_soc_pmic
   - GPIO tweaking; intel_soc_pmic
   - Remove non-DT code; vexpress-sysreg, tc3589x
   - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
                                rtc-s5m, sec-core, max77693, menelaus,
                                wm5102-tables
   - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
                     mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
                     lpc_ich, menelaus, twl6040
   - Update register/address values; rts5227, rts5249
   - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
                                        qcom-rpm, qcom-spmi-pmic
   - Couple of trivial core Kconfig fixups
   - Remove use of seq_printf return value; ab8500-debugfs
   - Remove __exit markups; menelaus, tps65010
   - Fix platform-device name collisions; mfd-core

  New drivers/supported devices:

   - Add support for wm8280/wm8281 into arizona
   - Add support for COMe-cBL6 into kempld-core
   - Add support for rts524a and rts525a into rts5249
   - Add support for ipq8064 into qcom_rpm
   - Add support for extcon into axp20x
   - New MediaTek MT6397 PMIC driver
   - New Maxim MAX77843 PMIC dirver
   - New Intel Quark X1000 I2C-GPIO driver
   - New Skyworks SKY81452 driver"

* tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: sec: Fix RTC alarm interrupt number on S2MPS11
  mfd: wm5102: Remove registers for output 3R from readable list
  mfd: tps65010: Remove incorrect __exit markups
  mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
  mfd: axp20x: Add support for extcon cell
  mfd: lpc_ich: Sort IDs
  mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias
  mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
  mfd: axp20x: Fix duplicate const for model names
  mfd: menelaus: Use macro for magic number
  mfd: menelaus: Drop support for SW controller VCORE
  mfd: menelaus: Delete omap_has_menelaus
  mfd: arizona: Correct type of gpio_defaults
  mfd: lpc_ich: Sort IDs
  mfd: Fix a typo in Kconfig
  mfd: qcom_rpm: Add support for IPQ8064
  mfd: devicetree: qcom_rpm: Document IPQ8064 resources
  mfd: core: Fix platform-device name collisions
  mfd: intel_quark_i2c_gpio: Don't crash if !DMI
  dt-bindings: Add vendor-prefix for X-Powers
  ...
2015-04-14 17:29:55 -07:00
Ming-ting Yao Wei
0604949ce3 Input: xpad - add rumble support for Xbox One controller
This adds rumble support for Xbox One controller by sending continuous
rumble command. Trigger button rumbling is not yet implemented.

Signed-off-by: Ming-ting Yao Wei <mwei@lxde.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-14 17:01:53 -07:00
Oliver Neukum
2afebafdbd Input: ff-core - use new debug macros
Replace old pr_* with dev_* debugging macros

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-14 14:29:49 -07:00
Thomas Hellstrom
8b8be51b4f Input: add vmmouse driver
VMMouse enables low-latency mouse-cursor-movements for VMWare and QEMU
guests.  By removing the guest cursor and using the host as a guest cursor
the cursor movement appears instant although in reality there is some lag.
To be able to do this, the host's view of the cursor position must exactly
match the guest's view and an absolute pointer device is needed. Enter the
VMMouse. While the VMMouse driver has historically been an Xorg user-space
driver, implementing it as a kernel imput driver enables rootless Xorg and
new compositing display servers for VMware guests.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-14 14:29:03 -07:00
duson
b9bced0eec Input: elan_i2c - adjust for newer firmware pressure reporting
Get pressure format flag from firmware to check if we need to normalize
pressure data before reporting it.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-14 10:21:42 -07:00
Linus Torvalds
8de29a35dc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...
2015-04-14 09:25:26 -07:00
Dmitry Torokhov
85a3685852 Merge branch 'next' into for-linus
Prepare first round of input updates for 4.1 merge window.
2015-04-14 08:51:33 -07:00
Jiri Kosina
05f6d02521 Merge branches 'for-4.0/upstream-fixes', 'for-4.1/genius', 'for-4.1/huion-uclogic-merge', 'for-4.1/i2c-hid', 'for-4.1/kconfig-drop-expert-dependency', 'for-4.1/logitech', 'for-4.1/multitouch', 'for-4.1/rmi', 'for-4.1/sony', 'for-4.1/upstream' and 'for-4.1/wacom' into for-linus 2015-04-13 23:41:15 +02:00
Hans de Goede
92bac83dd7 Input: alps - non interleaved V2 dualpoint has separate stick button bits
Non interleaved V2 dualpoint touchpad / stick combos have separate stick
button bits in the touchpad packets, if we do not check these then the
trackpoint buttons will not work when using the touchpad, and when pressed
when the user starts using the touchpad will report a release event even
though the button is still pressed.

This commit fixes this by checking the separate bits, note that we simply
combine the buttons, since the hardware does the same when using the touchpad
buttons with the trackpoint, so we do not have enough information to properly
separate them.

Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-12 15:44:15 -07:00
Hans de Goede
6bcca19f5d Input: alps - fix touchpad buttons getting stuck when used with trackpoint
When the left touchpad button gets pressed, and then the trackpoint is
moved, and then the button is released, the following happens:

1) touchpad packet is received, touchpad evdev node reports BTN_LEFT 1

2) pointing stick packet is received, the hw will report a BTN_LEFT 1 in
   this packet because when the trackstick is active it communicates the
   combined touchpad + pointing stick buttons in the trackstick packet,
   since alps_report_bare_ps2_packet passes NULL (*) for the dev2 parameter
   to alps_report_buttons the combining is not detected and the
   pointing stick evdev node will also report BTN_LEFT 1

3) on release of the button a pointing stick packet with BTN_LEFT 0 is
   received and the pointing stick evdev node will report BTN_LEFT 0

Note how because of the passing as NULL for dev2 the touchpad evdev node
will never send BTN_LEFT 0 in this scenario leading to a stuck mouse button.

This is a regression in 4.0 introduced by commit 04aae283ba
("Input: ALPS - do not mix trackstick and external PS/2 mouse data")

This commit fixes this by passing in the touchpad evdev as dev2 parameter
when calling alps_report_buttons for the pointingstick on alps v2 devices,
so that alps_report_buttons correctly detect that we're already reporting
the button as pressed via the touchpad evdev node, and will also send the
release event there.

Cc: stable@vger.kernel.org # 4.0
Reported-by: Hans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-12 15:39:41 -07:00
Dmitry Torokhov
8b8a518ef1 Input: atkbd - document "no new force-release quirks" policy
To save people some time let's document that we do not want new quirks for
"force-release" keys in the kernel and that they should patch userspace
(udev) instead.

Suggested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-11 00:03:08 -07:00
Fengguang Wu
07f19e3db8 Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-11 00:02:46 -07:00
Florian Echtler
c2529908a1 [media] sur40: fix occasional hard freeze due to buffer queue underrun
This patch fixes a kernel panic which occurs when buf_list is empty. This can
happen occasionally when user space is under heavy load (e.g. due to image
processing on the CPU) and new buffers aren't re-queued fast enough. In that
case, vb2_start_streaming_called can return true, but when the spinlock
is taken and sur40_poll attempts to fetch the next buffer from buf_list, the
list is in fact empty.

This patch needs to be applied on top of the queued one adding V4L2 support
to the sur40 driver.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08 06:28:56 -03:00
Masaki Ota
8d289842c8 Input: ALPS - V7 devices can report 5-finger taps
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:43 -07:00
Masaki Ota
3db5b9f782 Input: ALPS - add support for SS4 touchpad devices
This change adds support for SS4 touchpad devices as ALPS_PROTO_V8
protocol.  They are real multi-touch devices and can be found in TOSHIBA
Tecra C50.

Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:42 -07:00
Masaki Ota
8eccd39340 Input: ALPS - refactor alps_set_abs_params_mt()
In preparation for adding support for SS4 touchpads, let's split
alps_set_abs_params_mt into common, v7-specific, and other protocols
portions.

Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-07 08:47:42 -07:00
Dmitry Torokhov
5f63e885ac Linux 4.0-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVIws/AAoJEHm+PkMAQRiGwEcH/1GCBqrBzXaKwDdCPMRcYVUb
 MYkXmGkCGRYWe5MXI8QNAaa/CdG6mAFMHWN6CaMMpLTxnM1m87uBg01fQMsh73BO
 mRVLKE/soiJDnR1gYzBBDBYV/AUvytN5PhgeNaA95YIJvU3T1f3iTnV8vs30Dp0L
 YpxSqwr3C0k7C9IE0VcgfzvWJPCnQ9IWHuX3jn5s1XjGKVNbBYHMt6FusHdyXMfT
 dp8ksuGHwm30mTFI5xJpKOrRzfi+P5EsEUrsnFRPRM/iFTVrM5R7eaUhsRZb2+Wo
 YApnbYhUYz7om1AuQ+UZ/+S6y7ZLlGWegI1lWI754GIsczG5vPHEYhhgkzMhTsc=
 =kR1V
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc7' into next

Sync up with Linux 4.0-rc7 to bring in ALPS changes.
2015-04-07 08:46:23 -07:00
Benjamin Tissoires
c627589282 Input - mt: Fix input_mt_get_slot_by_key
The case occurred recently with a touchscreen using twice a slot during a
single EV_SYN event:

E: 0.288415 0000 0000 0000      # ------------ SYN_REPORT (0) ----------
E: 0.296207 0003 002f 0000      # EV_ABS / ABS_MT_SLOT          0
E: 0.296207 0003 0039 -001      # EV_ABS / ABS_MT_TRACKING_ID   -1
E: 0.296207 0003 002f 0001      # EV_ABS / ABS_MT_SLOT          1
E: 0.296207 0003 0035 0908      # EV_ABS / ABS_MT_POSITION_X    908
E: 0.296207 0003 0036 1062      # EV_ABS / ABS_MT_POSITION_Y    1062
E: 0.296207 0003 002f 0000      # EV_ABS / ABS_MT_SLOT          0
E: 0.296207 0003 0039 8787      # EV_ABS / ABS_MT_TRACKING_ID   8787
E: 0.296207 0003 0035 1566      # EV_ABS / ABS_MT_POSITION_X    1566
E: 0.296207 0003 0036 0861      # EV_ABS / ABS_MT_POSITION_Y    861
E: 0.296207 0003 0000 0908      # EV_ABS / ABS_X                908
E: 0.296207 0003 0001 1062      # EV_ABS / ABS_Y                1062
E: 0.296207 0000 0000 0000      # ------------ SYN_REPORT (0) ----------

This occurred because while having already slots 0 and 1 assigned, the
touchscreen sent:

0.293377 Tip Switch: 0 | Contact Id: 0 | X:  539 | Y: 1960 | Contact Count: 3
0.294783 Tip Switch: 1 | Contact Id: 1 | X:  908 | Y: 1062 | Contact Count: 0
0.296187 Tip Switch: 1 | Contact Id: 2 | X: 1566 | Y:  861 | Contact Count: 0

Slot 0 is released correclty, but when we look for Contact ID 2, the slot
0 is then picked up again because it is marked as inactive (trackingID < 0).

This is wrong, and we should not reuse a slot in the same frame.
The test should also check for input_mt_is_used().

In addition, we need to initialize mt->frame to an other value than 0.
With mt->frame being 0, all slots are tags as currently used, and so
input_mt_get_slot_by_key() would return -1 for all requests.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88903

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-07 15:16:36 +02:00
Ulrik De Bie
bd884149ac Input: elantech - fix absolute mode setting on some ASUS laptops
On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each
time set_rate is done.

In order to fix this, we will verify the firmware version, and if it
matches the one in those laptops, the set_rate function is overloaded
with a function elantech_set_rate_restore_reg_07 that performs the
set_rate with the original function, followed by a restore of reg_07
(the register that sets the absolute mode on elantech v4 hardware).

Also the ASUS TP500LN and X750JN firmware version, capabilities, and
button constellation is added to elantech.c

Cc: stable@vger.kernel.org
Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 15:39:07 -07:00
Linus Torvalds
9e441639d1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3
2015-04-06 14:10:08 -07:00
Sjoerd Simons
b6d2d3289f Input: atmel_mxt_ts - split out touchpad initialisation logic
If the "linux,gpio-keymap" DT property is defined, the T19 keys are
configured and the device is setup as a touchpad rather than a touchscreen.
The logic is part of the input device initialization routine but it can be
factored out to its own function to simplify the former.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 13:37:32 -07:00
Nick Dyer
b23157dc74 Input: atmel_mxt_ts - implement support for T100 touch object
Add support for the new T100 object which replaces the previous T9
multitouch touchscreen object in recent maXTouch devices. T100 provides
improved reporting with selectable auxiliary information, and a type field
for hover/stylus/glove reporting.

The hovering finger support was based on Chung-Yih's work in the ChromiumOS
downstream kernel:

https://chromium-review.googlesource.com/#/c/219280/

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
[javier: Factor out T9 and T100 init functions and rework hover support]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 13:37:31 -07:00
Tomeu Vizoso
ef30a40646 Input: cros_ec_keyb - fix clearing keyboard state on wakeup
As the comment right before explains, the keyboard state is to be cleared
only if the EC wasn't a wakeup source in the last suspend.

Without this commit, there's an unneeded delay when resuming from suspend
and we also lose the key that was pressed while suspended.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 10:01:20 -07:00
Michael S. Tsirkin
a54aecbd3a Input: gscps2 - drop pci_ids dependency
This driver does not use any PCI IDs, don't include the pci_ids.h header.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:08 -07:00
Benjamin Tissoires
63c4fda3c0 Input: synaptics - allocate 3 slots to keep stability in image sensors
When slowly dropping 1, 2 and then 3 fingers on an image sensor touchpad,
we can see that the first finger gets reassigned a new slot while it did
not move. This is due to the kernel tracking algorithm which can not assign
correctly the 3 touches, being out of slots.

Declaring that we support 3 slots allows to actually forward:
slot 0 -> down, slot 1 -> up, slot 2 -> down

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:07 -07:00
Benjamin Tissoires
58fd9af6e1 Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
This reverts commit 09d042a2eb ("Revert "Input: synaptics - use dmax in
input_mt_assign_slots"")

Now that balanced slots assignments seem to be fixed, let's re-enable the
use in synaptics.c and wait for users to complain if there are still
problems.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrik Rydberg <rydberg@bitmath.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:38:07 -07:00
Benjamin Tissoires
73e8a8e777 Input: MT - make slot assignment work for overcovered solutions
The recent inclusion of a deassignment cost in the slot assignment
algorithm did not properly account for the corner cases where the
solutions are overcovered. This change makes sure the resulting
assignment is unique, allocating new slots when necessary.

Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-06 09:37:33 -07:00
Hans de Goede
e3a79212ea Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.

Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.

This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-05 11:48:35 -07:00
Hans de Goede
59c30afbd3 Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.

This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.

This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-05 11:48:34 -07:00
Linus Walleij
61125591e1 mfd: tc3589x: enforce device-tree only mode
All systems using the TC3589x multifunction expander uses
devicetree, so don't clutter the place with a lot of
and assume it is there.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-03 17:08:59 -07:00
Linus Walleij
8b6f53c2f6 Input: tc3589x - localize platform data
This driver can only get its platform data from the device tree, and all
platforms using it do that. Localize the platform data for the keypad. A
later patch will enforce the device tree / OF dependence.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-04-03 17:08:59 -07:00
Linus Torvalds
1cced5015b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
 "A fix for ALPS driver for issue introduced in the latest update and a
  tweak for yet another Lenovo box in Synaptics.

  There will be more ALPS tweaks coming.."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: define INPUT_PROP_ACCELEROMETER behavior
  Input: synaptics - fix min-max quirk value for E440
  Input: synaptics - add quirk for Thinkpad E440
  Input: ALPS - fix max coordinates for v5 and v7 protocols
  Input: add MT_TOOL_PALM
2015-04-03 14:58:48 -07:00
Florian Echtler
e831cd251f [media] add raw video stream support for Samsung SUR40
This patch adds raw video support for the Samsung SUR40 using vbuf2-dma-sg.
All tests from v4l2-compliance pass. Support for VB2_USERPTR is currently
disabled due to unexpected interference with dma-sg buffer sizes.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: fix compile warning: %ld -> %zd]

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 21:16:03 -03:00
Filip Ayazi
85734b1a5d Input: synaptics - fix min-max quirk value for E440
Commit 98dc070373 ("Input: synaptics - add quirk for Thinkpad E440") had
a typo in ymax, this changes the value to the one reported by
touchpad-edge-detector and mentioned in the commit.

Signed-off-by: Filip Ayazi <filipayazi@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31 14:46:39 -07:00
Aaron Sierra
bbdb38a22e Input: tsc2007 - Convert msecs to jiffies only once
Eliminate redundant calculations by performing millisecond to jiffy
calculations once during driver initialization.

Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31 14:41:33 -07:00
Linus Walleij
1422731dbc mfd: tc3589x: Enforce device-tree only mode
All systems using the TC3589x multifunction expander uses
devicetree, so don't clutter the place with a lot of
and assume it is there.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-26 14:20:17 +00:00
Maxime Ripard
709583e894 Input: edt-ft5x06 - remove EV_SYN event report
input_register_device already sets the EV_SYN event since all devices can
generate them.

Remove the redundant affectation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:01:11 -07:00
Maxime Ripard
2c00559884 Input: edt-ft5x06 - allow to setting the maximum axes value through the DT
Currently the driver relies on some obscure and undocumented register to set
the maximum axis value.

The reported value is way too high to be meaningful, which confuses some
userspace tools like QT's evdevtouch plugin which try to scale the reported
events to the maximum values.

Use the values from the DT to set meaningful values.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:50 -07:00
Maxime Ripard
0a363a3809 Input: of_touchscreen - register multitouch axes
So far, the DT parsing code was only setting up the regular input axes,
completely ignoring their multitouch counter parts.

Fill them with the same parameters than the regular axes.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:40 -07:00
Maxime Ripard
3eea8b5d68 Input: of_touchscreen - rework the DT parsing function
The DT parsing function currently duplicates a lot of the code to parse the
touchscreen DT properties. In order to ease further additions to this
parsing routine, rework it slightly to create new helper functions.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 12:00:39 -07:00
Dmitry Torokhov
5037a17966 Input: mma8450 - convert to using managed resources
This simplifies error handling and device removal code. Also let's
get rid of setting driver's owner since i2c core does it for us.

Tested-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 11:35:06 -07:00
Hans de Goede
a93ad65d37 Input: add support for ChipOne icn8318 based touchscreens
The ChipOne icn8318 is an i2c capacitive touchscreen controller typically
used in cheap android tablets, this commit adds a driver for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 11:27:52 -07:00
Lars Poeschel
dbea4032f8 Input: usbtouchscreen - add new model from IRTOUCHSYSTEMS
This adds support for another model of IRTOUCH SYSTEMS Co.,LtD infrared
touchscreens. The USB vendorID/deviceID is 6615/0012. It is also sold
under the label "Elektrosil".

The datasheet states that coordinates for x and y are in the range from
0 to 32767.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-24 09:29:34 -07:00
Jonathan Richardson
d5ae685f15 Input: add Broadcom iProc touchscreen driver
Add initial version of the Broadcom touchscreen driver.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 11:04:48 -07:00
Ramiro Morales
98dc070373 Input: synaptics - add quirk for Thinkpad E440
Its ClickPad shares PNP ID "LEN2006" with the one in model E540 which is
already handled by the driver (both are Haswell iterations of the Edge
line, launched in 2014) but the dimensions it reports are different:

  $ sudo ./touchpad-edge-detector /dev/input/event3
  Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3
  Move one finger around the touchpad to detect the actual edges
  Kernel says: x [1472..5044], y [1408..3398]
  Touchpad sends: x [1024..5045], y [2457..4832] /^C

Fortunately we can use the board ID, which is also different, to
distinguish among them.

  $ dmesg | grep -i synaptics
  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646
  psmouse serio1: synaptics: serio: Synaptics pass-through port at
      isa0060/serio1/input0
  input: SynPS/2 Synaptics TouchPad as
      /devices/platform/i8042/serio1/input/input4

Board ID in E540 is 2722:

  psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
      caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859

(from https://launchpadlibrarian.net/179702965/BootDmesg.txt)

Signed-off-by: Ramiro Morales <cramm0@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 10:35:42 -07:00
Dmitry Torokhov
188933ac13 Linux 4.0-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVD1VGAAoJEHm+PkMAQRiG7yoH/juKOQ1zbxi5M+mleDEEJtA0
 RxQSojqEMWIKrWi8PNZxjENn1OZB6XOLIXOhlyAZBrmgsjO34p1DyXlZMznr/R8W
 kQ2Xxs061hRtB3OuruMIqOApUrjuqsaCwgbgUS1qWmqZcoyZN4oELyZMP6OOlqv5
 UUBZm8MfyXGyxrCcg39mjct3VEOhiuEcvL6SUxOC380CdSVAnyqHFPcz0JVqMUn9
 9RUBs0T9cMdhb0mZ2bfXzt6AKArj63G2nXOum+VzFcvspSm2U+MPIDCuoE+ZbTPS
 jqIAgG0rj1ezRyb5oeJrvlU0Yy3u/cXoMPs9+kORvpladooYNLti8ovh6qllm0I=
 =d/ye
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc5' into next

Merge with the latest upstream to synchronize Synaptics changes
and bring in new infrastructure pieces.

Conflicts:
	drivers/input/mouse/synaptics.c
2015-03-23 09:18:27 -07:00
Dmitry Torokhov
c164c147c9 Input: ALPS - fix max coordinates for v5 and v7 protocols
Commit 3296f71cd2 ("Input: ALPS - consolidate
setting protocol parameters") inadvertently moved call to
alps_dolphin_get_device_area() from v5 to v7 protocol, causing both
protocols report incorrect maximum values for X and Y axes which resulted
in crash in Synaptics X driver.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94801
Reported-by: Santiago Gala <sgala@apache.org>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:14:25 -07:00
Jens Thiele
4ed0e032c3 Input: sun4i-ts - allow controlling filter and sensitivity via DT
This commit introduces two new optional device-tree properties:
"tp-sensitive-adjust": adjust sensitivity of pen down detection
"filter-type": select median and averaging filter

The previous fixed defaults, didn't work well for the Olimex
A13-LCD10TS (I have).

Signed-off-by: Jens Thiele <karme@karme.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-23 09:11:11 -07:00
Courtney Cavin
68c581d5e7 Input: add Qualcomm PM8941 power key driver
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 21:59:55 -07:00
Brian K. Turner
7e174702c8 Input: lifebook - fix tabbing issue
This change fixes a style issue where spaces where used instead of tabs.

Signed-off-by: Brian K. Turner <turnerbk84@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 09:45:51 -07:00
Linus Torvalds
b314acaccd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "An update to Synaptics driver that makes it usable with the 2015
  lineup from Lenovo"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - use dmax in input_mt_assign_slots"
  Input: synaptics - remove X250 from the topbuttonpad list
  Input: synaptics - remove X1 Carbon 3rd gen from the topbuttonpad list
  Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 series
  Input: synaptics - remove TOPBUTTONPAD property for Lenovos 2015
  Input: synaptics - retrieve the extended capabilities in query $10
  Input: synaptics - do not retrieve the board id on old firmwares
  Input: synaptics - handle spurious release of trackstick buttons
  Input: synaptics - fix middle button on Lenovo 2015 products
  Input: synaptics - skip quirks when post-2013 dimensions
  Input: synaptics - support min/max board id in min_max_pnpid_table
  Input: synaptics - remove obsolete min/max quirk for X240
  Input: synaptics - query min dimensions for fw v8.1
  Input: synaptics - log queried and quirked dimension values
  Input: synaptics - split synaptics_resolution(), query first
2015-03-19 16:43:10 -07:00
Nicolas Iooss
61c797d52d Input: elan_i2c - fix typo in include header guard
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Fixes: 6696777c65 ("Input: add driver for Elan I2C/SMbus touchpad")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-19 12:16:18 -07:00
Fabian Frederick
245165de98 Input: constify of_device_id arrays
of_device_id is always used as const argument (See driver.of_match_table
and open firmware functions).

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-19 12:16:18 -07:00
Dmitry Torokhov
09d042a2eb Revert "Input: synaptics - use dmax in input_mt_assign_slots"
This reverts commit 6ab17a8484 since it,
according to Benjamin, causes issues with slot assignment:

E: 15.669119 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 15.954242 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 15.954242 0003 0039 0505     # EV_ABS / ABS_MT_TRACKING_ID   505
E: 15.954242 0003 0035 3851     # EV_ABS / ABS_MT_POSITION_X    3851
E: 15.954242 0003 0036 4076     # EV_ABS / ABS_MT_POSITION_Y    4076
E: 15.954242 0003 003a 0034     # EV_ABS / ABS_MT_PRESSURE      34
E: 15.954242 0001 014a 0001     # EV_KEY / BTN_TOUCH            1
E: 15.954242 0003 0000 3851     # EV_ABS / ABS_X                3851
E: 15.954242 0003 0001 4076     # EV_ABS / ABS_Y                4076
E: 15.954242 0003 0018 0034     # EV_ABS / ABS_PRESSURE         34
E: 15.954242 0001 0145 0001     # EV_KEY / BTN_TOOL_FINGER      1
E: 15.954242 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
... (bunch of regular events)...
E: 16.020614 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.043601 0003 0035 3873     # EV_ABS / ABS_MT_POSITION_X    3873
E: 16.043601 0003 0036 3903     # EV_ABS / ABS_MT_POSITION_Y    3903
E: 16.043601 0003 003a 0050     # EV_ABS / ABS_MT_PRESSURE      50
E: 16.043601 0003 0035 3032     # EV_ABS / ABS_MT_POSITION_X    3032
E: 16.043601 0003 0036 3832     # EV_ABS / ABS_MT_POSITION_Y    3832
E: 16.043601 0003 003a 0044     # EV_ABS / ABS_MT_PRESSURE      44
E: 16.043601 0003 0000 3032     # EV_ABS / ABS_X                3032
E: 16.043601 0003 0001 3832     # EV_ABS / ABS_Y                3832
E: 16.043601 0003 0018 0044     # EV_ABS / ABS_PRESSURE         44
E: 16.043601 0001 0145 0000     # EV_KEY / BTN_TOOL_FINGER      0
E: 16.043601 0001 014d 0001     # EV_KEY / BTN_TOOL_DOUBLETAP   1
E: 16.043601 0000 0000 0000     # ------------ SYN_REPORT (0) ----------
E: 16.068837 0003 002f 0001     # EV_ABS / ABS_MT_SLOT          1
E: 16.068837 0003 0039 0506     # EV_ABS / ABS_MT_TRACKING_ID   506
E: 16.068837 0003 0035 3912     # EV_ABS / ABS_MT_POSITION_X    3912
E: 16.068837 0003 0036 3743     # EV_ABS / ABS_MT_POSITION_Y    3743
E: 16.068837 0003 003a 0056     # EV_ABS / ABS_MT_PRESSURE      56
E: 16.068837 0003 002f 0000     # EV_ABS / ABS_MT_SLOT          0
E: 16.068837 0003 0035 3026     # EV_ABS / ABS_MT_POSITION_X    3026
E: 16.068837 0003 0036 3708     # EV_ABS / ABS_MT_POSITION_Y    3708
E: 16.068837 0003 003a 0052     # EV_ABS / ABS_MT_PRESSURE      52
E: 16.068837 0003 0000 3026     # EV_ABS / ABS_X                3026
E: 16.068837 0003 0001 3708     # EV_ABS / ABS_Y                3708
E: 16.068837 0003 0018 0052     # EV_ABS / ABS_PRESSURE         52
E: 16.068837 0000 0000 0000     # ------------ SYN_REPORT (0) ----------

Slot 0 and 1 gets inverted in the second report above, which
introduces a cursor jump. The problem is that this cursor jump is
often enough to leave the current widget, and X sends the
scrolling events to whoever is now under the cursor.

Reported-by: Benjamin Tissoires <btissoir@redhat.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
2015-03-16 09:17:16 -07:00
Dmitry Torokhov
6067fe5e0b Merge branch 'synaptics' into for-linus
Bring in changes needed to properly handle Lenovo 2015 lineup.
2015-03-16 09:12:56 -07:00
Olivier Sobrie
d1b12075ff Input: pwm-beeper - remove useless call to pwm_config()
Calling pwm_config() with a period equal to zero always results in
error (-EINVAL) and pwm chip config method is never called.

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-12 14:53:11 -07:00
Hans de Goede
877bef7de1 Input: sun4i-ts - really fix A10 temperature reporting
The commit titled: "Input: sun4i-ts -  A10 (sun4i) has a different
temperature curve" contains a math error, the offset it uses is in degrees,
but the actual code applies the offset before multiplying by stepsize :|

Given that this is rather backwards (every math course ever thought applies
the multiplication before the offset for linear functions), this commit
fixes things by changing the code applying the offset to do the logical
thing, adjusting the offset for the other models accordingly.

This has been tested on an A10, A13, A20 and A31 to make sure everything
really is correct now.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-12 14:53:10 -07:00
Dan Carpenter
b6310affbe Input: sx8654 - signedness bug in sx8654_irq()
"irqsrc" needs to be signed for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-11 10:44:30 -07:00
Charlie Mooney
37dee1acdd Input: elants_i2c - append hw_version to FW file
Currently the elants_i2c driver simply requests a static filename
/lib/firmware/elants_i2c.bin when it gets firmware updates.  This is a
problem if you have two Elan touchscreens using the same driver.  If both
touchscreens have different firmwares, you would need to move the files
around in your filesystem when you're updating them so that they don't get
updated with the other's FW.  If you have a read-only filesystem then this
is impossible, even.

This patch changes the elants_i2c driver to automatically append the
four-hex-digit hw_version of the device onto the name of the FW file it's
requesting for update.  Since different touchscreens should have a
different hw_version's this means the user needs to append the hw version
of the touchscreen he or she intends to update onto the end of the firmware
filename and then the driver will do the rest.

The firmware filenames it looks for now are of the form:

  elants_i2c_${HW_VERSION}.bin

  eg:

  elants_i2c_2a44.bin

Signed-off-by: Charlie Mooney <charliemooney@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-11 10:24:18 -07:00
Linus Torvalds
e93df634aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
 "Miscellaneous driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - disable "palm detection" in the focaltech driver
  Input: psmouse - disable changing resolution/rate/scale for FocalTech
  Input: psmouse - ensure that focaltech reports consistent coordinates
  Input: psmouse - remove hardcoded touchpad size from the focaltech driver
  Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ request
  Input: ALPS - fix memory leak when detection fails
  Input: sun4i-ts - add thermal driver dependency
  Input: cyapa - remove superfluous type check in cyapa_gen5_read_idac_data()
  Input: cyapa - fix unaligned functions redefinition error
  Input: mma8450 - add parent device
2015-03-09 18:06:13 -07:00
Rafael J. Wysocki
f13b2065de Input: i8042 - allow KBD and AUX ports to wake up from suspend-to-idle
While registering serio device for i8042, mark them as wakeup-capable
and check their user space wakeup settings in i8042_pm_suspend() and
i8042_pm_resume() to enable or disable, respectively, their interrupts
to wake up the system.

This makes it possible to use the PC keyboard to wake up the system
from suspend-to-idle, among other things, after writing "enabled" to
the keyboard serio device's power/wakeup sysfs attribute.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-09 17:05:31 -07:00
Benjamin Tissoires
8f004f3f4d Input: synaptics - remove X250 from the topbuttonpad list
Lenovo X250 has a PnpID of LEN0046, but it does not have the top software
button requirement.

For the record, Lenovo T450s and W541 have a PnpID of LEN200f and LEN004a,
so they are not on the top software button list.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Daniel Martin <consume.noise@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:54 -07:00
Benjamin Tissoires
860e6f7fcb Input: synaptics - remove X1 Carbon 3rd gen from the topbuttonpad list
Lenovo decided to switch back to physical buttons for the trackstick on
their latest series. The PNPId list was provided before they reverted back
to physical buttons, so it contains the new models too.  We can know from
the touchpad capabilities that the touchpad has physical buttons, so
removing the ids from the list is not mandatory. It is still nicer to
remove the wrong ids, so start by removing the X1 Carbon 3rd gen, with the
PNPId of LEN0048.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:54 -07:00
Benjamin Tissoires
cdd9dc1959 Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 series
The 2015 series of the Lenovo thinkpads added back the hardware buttons on
top of the touchpad for the trackstick.

Unfortunately, they are wired to the touchpad, and not the trackstick.
Thus, they are seen as extra buttons from the kernel point of view.

This leads to a problem in user space because extra buttons on synaptics
devices used to be used as scroll up/down buttons. So in the end, the
experience for the user is scroll events for buttons left and right when
using the trackstick. Yay!

Fortunately, the firmware advertises such behavior in the extended
capability $10, and so we can re-route the buttons through the pass-through
interface.

Hallelujah-expressed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:53 -07:00
Benjamin Tissoires
3adde1f591 Input: synaptics - remove TOPBUTTONPAD property for Lenovos 2015
The 2015 series of the Lenovo thinkpads added back the hardware buttons on
top of the touchpad for the trackstick.

Unfortunately, Lenovo used the PNPIDs that are supposed to be "5 buttons"
touchpads, so the new laptops also have the INPUT_PROP_TOPBUTTONPAD. Yay!

Instead of manually removing each of the new ones, or hoping that we know
all the current ones, we can consider that the PNPIDs list that were given
contains touchpads that have the trackstick buttons, either physically
wired to them, or emulated with the top software button property.

Thanks to the extra buttons capability in query $10, we can reliably detect
the physical buttons from the software ones, and so we can remove the
TOPBUTTONPAD property even if it was declared as such.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:53 -07:00
Benjamin Tissoires
06aa374bc7 Input: synaptics - retrieve the extended capabilities in query $10
Newer Synaptics touchpads need to get information from the query $10.
Retrieve it if available.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:52 -07:00
Benjamin Tissoires
b57a7128be Input: synaptics - do not retrieve the board id on old firmwares
The board id capability has been added in firmware 7.5.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:36:52 -07:00
Benjamin Tissoires
ebc80840b8 Input: synaptics - handle spurious release of trackstick buttons
The Fimware 8.1 has a bug in which the extra buttons are only sent when the
ExtBit is 1.  This should be fixed in a future FW update which should have
a bump of the minor version.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:34:48 -07:00
Dmitry Torokhov
dc5465dc8a Input: synaptics - fix middle button on Lenovo 2015 products
On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle
button of the trackstick (attached to the touchpad serio device, of course)
seems to get lost.

Actually, the touchpads reports 3 extra buttons, which falls in the switch
below to the '2' case. Let's handle the case of odd numbers also, so that
the middle button finds its way back.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:34:34 -07:00
Benjamin Tissoires
02e07492cd Input: synaptics - skip quirks when post-2013 dimensions
Post-2013 Lenovo laptops provide correct min/max dimensions, which are
different with the ones currently quirked.  According to
https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids
are assigned in the post-2013 touchpads:

t440p/t440s: LEN0036 -> 2964/2962
t540p:       LEN0034 -> 2964

Using 2961 as the common minimum makes these 3 laptops OK. We may need
to update those values later if other pnp_ids has a lower board_id.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:33:16 -07:00
Daniel Martin
5b3089ddb5 Input: synaptics - support min/max board id in min_max_pnpid_table
Add a min/max range for board ids to the min/max coordinates quirk. This
makes it possible to restrict quirks to specific models based upon their
board id. The define ANY_BOARD_ID (0) serves as a wild card.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Martin <daniel.martin@secunet.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:33:16 -07:00
Daniel Martin
b05f4d1c33 Input: synaptics - remove obsolete min/max quirk for X240
The firmware of the X240 (LEN0035, 2013/12) exposes the same values
    x [1232..5710], y [1156..4696]
as the quirk applies.

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:32:19 -07:00
Daniel Martin
ac097930f0 Input: synaptics - query min dimensions for fw v8.1
Query the min dimensions even if the check
SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the
firmware version 8.1 is safe.

With that we don't need quirks for post-2013 models anymore as they expose
correct min and max dimensions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
  re-order the tests to check SYN_CAP_MIN_DIMENSIONS even on FW 8.1
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:32:19 -07:00
Daniel Martin
9aff65982d Input: synaptics - log queried and quirked dimension values
Logging the dimension values we queried and the values we use from a quirk
to overwrite can be helpful for debugging.

This partly relates to bug:
    https://bugzilla.kernel.org/show_bug.cgi?id=91541

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:32:18 -07:00
Daniel Martin
8b04baba10 Input: synaptics - split synaptics_resolution(), query first
Split the function synaptics_resolution() into synaptics_resolution() and
synaptics_quirks().  synaptics_resolution() will be called before
synaptics_quirks() to query dimensions and resolutions before overwriting
them with quirks.

Cc: stable@vger.kernel.org
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 23:32:18 -07:00
Hans de Goede
91c68a7c1d Input: sun4i-ts - A10 (sun4i) has a different temperature curve
Testing has revealed that the temperature in the rtp controller of the A10
(sun4i) SoC has a different curve then on the A13 (sun5i) and later models.

Add a new sun5i-a13-ts compatible to differentiate the newer models and
set the curve based on the compatible string.

The new curve is still not ideal on all A10-s, that seems to have to
do with there being a large spread between different A10-s out there,
the new curve us based on callibration results on 4 completely different
models:
                        raw min raw max temp min temp max stepsize offset
Tong Zhang's hackberry    2402    2680    45.0     80.0    0.125   -255.3
Hansg's Cubieboard        2207    2300    36.0     45.0    0.096   -175.8
Olliver's lime 1 (*):     2258    2537    48.3     87.1    0.139   -265.7
Olliver's lime 2 (*):     2222    2486    46.7     91.7    0.170   -331.0
*) from: http://linux-sunxi.org/Temperature_Calibration

Average all 4:                                             0.133   -257.0
Average without outliers (middle 2):                       0.132   -261.0

Since it is better to slightly overreport the temperature this patch uses
the average of all 4 as curve.

This fixes the temperature reported on the A10 being much higher then
expected.

Reported-by: Tong Zhang <lovewilliam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 14:16:59 -07:00
Duson Lin
973877477e Input: elan_i2c - remove duplicate repeat code
Remove duplicate "repeat--" from function elan_initialize.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-08 14:16:59 -07:00
Duson Lin
b3beed7fe8 Input: elan_i2c - return error code when resume fails
In order to better diagnose potential issues let's return error to the
upper layers when resuming the device fails and also add a few diagnostic
messages.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 21:11:51 -08:00
Dmitry Torokhov
ceb5b6c8be Input: pwm-beeper - remove unneeded PWM_BEEPER_PM_OPS define
The device->pm pointer is always present so there is no need to do tricks with
conditionally defining the pointer.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 21:11:50 -08:00
Mathias Gottschlag
4eb8d6e7e5 Input: psmouse - disable "palm detection" in the focaltech driver
Apparently, the threshold for large contact area seems to be rather low on
some devices, causing the touchpad to frequently freeze during normal
usage. Because we do now know how we are supposed to use the value in
question, this commit just drops the related code completely.

Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 13:40:21 -08:00
Mathias Gottschlag
4ec212f003 Input: psmouse - disable changing resolution/rate/scale for FocalTech
These PS/2 commands make some touchpads stop responding, so this commit
adds some dummy functions to replace the generic implementation. Because
scale changes were not encapsulated in a method of struct psmouse yet, this
commit adds a method set_scale to psmouse.

Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 13:40:21 -08:00
Mathias Gottschlag
679d83ea93 Input: psmouse - ensure that focaltech reports consistent coordinates
We don't know whether x_max or y_max really hold the maximum possible
coordinates, and we don't know for sure whether we correctly interpret the
coordinates sent by the touchpad, so we clamp the reported values to
prevent confusion in userspace code.

Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 13:40:20 -08:00
Mathias Gottschlag
3e98452519 Input: psmouse - remove hardcoded touchpad size from the focaltech driver
The size has in most cases already been fetched from the touchpad, the
hardcoded values should have been removed.

Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-07 13:40:20 -08:00
Sébastien Szymanski
902cb3afab Input: add support for Semtech SX8654 I2C touchscreen controller
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 17:18:17 -08:00
Aleksei Mamlin
771d8f1b17 Input: goodix - add device tree support
This change adds device tree support and binding information for Goodix
GT9xx series touchscreen controller.  It also adds support for 5-finger
chips, like GT911 and GT912, which can be found on ARM tablets, such as
Wexler TAB7200 and MSI Primo73.

Datasheets can be found here:
https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 17:18:17 -08:00
Aleksei Mamlin
a7ac7c95d4 Input: goodix - use max touch number from device config
Use max number of touches from device config instead of hardcoding.

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 17:18:16 -08:00
Dmitry Torokhov
de4e374b40 Input: synaptics - switch ForcePad detection to PNP IDs
According to Synaptics devices with ForcePads use SYN300D and SYN3014 as
PNP IDs, so let's switch from DMI-bases detection scheme to PNP-based
one, which should be more reliable.

Suggested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 11:25:32 -08:00
Dmitry Torokhov
99e14c1e23 Input: psmouse - when comparing PNP IDs ignore case
PNP IDs are supposed to be case-insensitive and so we should compare
them as such.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 11:25:31 -08:00
Linus Walleij
d7535ffa42 Input: driver for microcontroller keys on the iPaq h3xxx
This adds a key input driver for the keys found on the h3xxx
iPAQ series.

Based on a driver from handhelds.org 2.6.21 kernel, written
by Alessandro GARDICH.

Signed-off-by: Alessandro GARDICH <gremlin@gremlin.it>
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 11:25:31 -08:00
Jaewon Kim
e5abff1fe2 Input: add haptic support for max77843
This patch adds support for haptic on max77843 MFD (Multi Function Device)
with PMIC, MUIC, LED, CHARGER.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
[Jim Davis <jim.epost@gmail.com>: should depend on REGULATOR not PWM]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-06 11:24:53 -08:00
Valentin Rothberg
20f02d66f0 Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ request
Since commit 1c6c69525b ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

Currently, plat->irqtype is only set to IRQF_TRIGGER_FALLING.  This
patch sets the ONESHOT flag directly in request_threaded_irq() to
enforce the flag without being affected by future changes to
plat->irqtype.

Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci

Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-04 15:17:08 -08:00
Dmitry Torokhov
93050db206 Input: ALPS - fix memory leak when detection fails
This fixes memory leak introduced by commit
a09221e83e

Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-04 15:17:08 -08:00
Olliver Schinagl
1feb57a245 gpio: add parameter to allow the use named gpios
The gpio binding document says that new code should always use named
gpios. Patch 40b73183 added support to parse a list of gpios from child
nodes, but does not make it possible to use named gpios. This patch adds
the con_id property and implements it is done in gpiolib.c, where the
old-style of using unnamed gpios still works.

Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Bryan Wu <cooloney@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-04 13:58:58 +01:00
Scott Branden
0c7e67a928 Input: add driver for Broadcom keypad controller
Broadcom Keypad controller is used to interface a SoC with a matrix-type
keypad device. The keypad controller supports multiple row and column
lines. A key can be placed at each intersection of a unique row and a
unique column. The keypad controller can sense a key-press and key-release
and report the event using an interrupt to the CPU.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-02 15:16:52 -08:00
Arnd Bergmann
4a6155a465 Input: sun4i-ts - add thermal driver dependency
The sun4i-ts driver has had a dependency on the thermal code
with the addition of the thermal zone sensor support, but this
is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y,
THERMAL=m and THERMAL_OF=y we get

drivers/built-in.o: In function `sun4i_ts_remove':
:(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister'
drivers/built-in.o: In function `sun4i_ts_probe':
:(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register'
:(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister'

We need the dependency on THERMAL in order to ensure that this
driver becomes a loadable module if the thermal support itself
is modular, while the dependency on THERMAL_OF is a runtime
dependency and the driver will still build if it is missing.
It is entirely possible to build sun4i-ts without THERMAL_OF
just to use the hwmon sensors and/or touchscreen.

Fixes: 2236971079 ("Input: sun4i-ts - add thermal zone sensor support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[wens@csie.org: Fix description and Kconfig dependencies]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-02 15:15:50 -08:00
Geert Uytterhoeven
2523caab3c Input: cyapa - remove superfluous type check in cyapa_gen5_read_idac_data()
drivers/input/mouse/cyapa_gen5.c: In function ‘cyapa_gen5_read_idac_data’:
drivers/input/mouse/cyapa_gen5.c:1876: warning: ‘max_element_cnt’ may be used uninitialized in this function
drivers/input/mouse/cyapa_gen5.c:1873: warning: ‘offset’ may be used uninitialized in this function

If *data_size is non-zero, and idac_data_type contains an unknown type,
max_element_cnt and offset will be uninitialized, and the loop will
process non-existing data.

However, this cannot happen (for now), as there's a test for unknown
types at the top of cyapa_gen5_read_idac_data().

As no "if ... else if ..." is used in other places, remove the
superfluous "if" to silence the compiler warning.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-02 13:31:33 -08:00
Dudley Du
17a28055d5 Input: cyapa - fix unaligned functions redefinition error
Use asm/unaligned.h instead of linux/unaligned/access_ok.h header file to
fix compiling issues such as following while doing cross platform
compiling:

"include/linux/unaligned/access_ok.h:7:19: error: redefinition of
 'get_unaligned_le16'
...
include/linux/unaligned/le_struct.h:6:19: note: previous definition of
 'get_unaligned_le16' was here".

Reported-by: kbuild test robot <kbuild-all@01.org>
Signed-off-by: Dudley Du <dudl@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-02 13:31:32 -08:00
Mauro Carvalho Chehab
559addc25b [media] fixp-arith: replace sin/cos table by a better precision one
The cos table used at fixp-arith.h has only 8 bits of precision.
That causes problems if it is reused on other drivers.

As some media drivers require a higher precision sin/cos
implementation, replace the current implementation by one that
will provide 32 bits precision.

The values generated by the new implementation matches the
32 bit precision of glibc's sin for an angle measured in
integer degrees.

It also provides support for fractional angles via linear
interpolation. On experimental calculus, when used a table
with a 0.001 degree angle, the maximum error for sin is
0.000038, which is likely good enough for practical purposes.

There are some logic there that seems to be specific to the
usage inside ff-memless.c. Move those logic to there, as they're
not needed elsewhere.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-02 14:50:06 -03:00
Javier Martinez Canillas
1b84f2a4cd mfd: cros_ec: Use fixed size arrays to transfer data with the EC
The struct cros_ec_command will be used as an ioctl() argument for the
API to control the ChromeOS EC from user-space. So the data structure
has to be 64-bit safe to make it compatible between 32 and 64 avoiding
the need for a compat ioctl interface. Since pointers are self-aligned
to different byte boundaries, use fixed size arrays instead of pointers
for transferring ingoing and outgoing data with the Embedded Controller.

Also, re-arrange struct members by decreasing alignment requirements to
reduce the needing padding size.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-02-26 15:44:52 -08:00
Stefan Sauer
71daf89476 Input: mma8450 - add parent device
Add the parent device so that udev can show the full hierarchy. This avoids
the device showing up under /devices/virtual/input instead of the i2c bus
it is actually attached to.

Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-25 17:13:51 -08:00
Linus Torvalds
1acd2de5fa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
 "The second round of updates for the input subsystem.

  Updates to ALPS an bfin_roraty drivers and a couple oother fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - use IS_ENABLED instead of homegrown code
  Input: bfin_rotary - introduce open and close methods
  Input: bfin_rotary - convert to use managed resources
  Input: bfin_rotary - use generic IO functions
  Input: bfin_rotary - move pin lists into into platform data
  Input: bfin_rotary - move platform header to linux/platform_data
  Input: bfin_rotary - mark suspend and resume code as __maybe_unused
  Input: bfin_rotary - fix potential oops in interrupt handler
  Input: ALPS - move v7 packet info to Documentation and v6 packet info
  Input: ALPS - fix confusing comment in protocol data
  Input: ALPS - do not mix trackstick and external PS/2 mouse data
  Input: ALPS - fix trackstick detection on some Dell Latitudes
  Input: ALPS - consolidate setting protocol parameters
  Input: ALPS - split protocol data from model info
  Input: ALPS - make Rushmore a separate protocol
  Input: ALPS - renumber protocol numbers
  Input: adi - remove an unnecessary check
  Input: pxa27x_keypad - remove an unneeded NULL check
  Input: soc_button_array - use "Windows" key for "Home"
2015-02-21 12:59:04 -08:00
Dmitry Torokhov
290b799c39 Input: psmouse - use IS_ENABLED instead of homegrown code
Instead of having various protocols provide <protocol>_supported()
functions, let's use IS_ENABLED() macro that works well in "if" statements.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:08:35 -08:00
Dmitry Torokhov
97ae2b5c17 Merge branch 'bfin_rotary' into next
Merge bfin_rotary driver changes from Sonic Zhang.
2015-02-15 16:07:18 -08:00
Dmitry Torokhov
c8af781ebf Input: bfin_rotary - introduce open and close methods
Introduce open and close methods for the input device to postpone enabling
the device until it is needed.

Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:29 -08:00
Sonic Zhang
f14d4df93a Input: bfin_rotary - convert to use managed resources
Use of managed resources simplifies error handling.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:28 -08:00
Sonic Zhang
71adf22f47 Input: bfin_rotary - use generic IO functions
Instead of using arch-specific accessors remap rotary register physical
address into kernel space in probe and use standard readw and writew to
access rotary MMRs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:28 -08:00
Sonic Zhang
5ea0699a7b Input: bfin_rotary - move pin lists into into platform data
Newer Blackfin boards use pinctrl API to manage pins and the legacy
peripherial lists are not useful on them. Let's move pin lists into
platform data so older boards can still use them and newer boards can use
the modern API.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:27 -08:00
Sonic Zhang
1ea74014ab Input: bfin_rotary - move platform header to linux/platform_data
The platform data definition of the rotary driver should be generic for all
architectures.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:27 -08:00
Dmitry Torokhov
5ec662e7a6 Input: bfin_rotary - mark suspend and resume code as __maybe_unused
Instead of using #ifdef to guard potentially unused suspend and resume code
let's mark them as __maybe_unused so they still get discarded if they are
not used but we do not get warning. This allows for better compile coverage.

Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:26 -08:00
Dmitry Torokhov
7694f44d63 Input: bfin_rotary - fix potential oops in interrupt handler
The interrupt handler in the driver tries to fetch driver data from
platform device, unfortunately it is only set up after interrupt handler
is registered. Since interrupt handler does not really need to access
the platform device itself let's change it to get the driver data
instance instead.

Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:06:04 -08:00
Pali Rohár
ef47fa5280 Input: ALPS - move v7 packet info to Documentation and v6 packet info
This patch move all packet info from driver source code to documentation
and adds info about v6 packet format (from driver source code).

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:04:23 -08:00
Dmitry Torokhov
626b9da0b5 Input: ALPS - fix confusing comment in protocol data
The comment about suspicions entry 0x20, 0x02, 0x0e has over time drifted
away and it become hard to figure out what it meant. Let's move it back so
it is clear.

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 16:04:23 -08:00
Pali Rohár
04aae283ba Input: ALPS - do not mix trackstick and external PS/2 mouse data
Previously dev2 device was used for both external PS/2 mouse and internal
trackstick device (if available). This change introduces dev3 device which
is used for external PS/2 mouse data and dev2 is now used only for
trackstick.

In case that trackstick is not present dev2 is not created, so userspace
does not see non existent device in system.

Because laptops with ALPS devices often do not use i8042 active
multiplexing all data (from touchpad, trackstick and external PS/2 mouse)
come to one port.  So it is not possible to know if external PS/2 mouse is
connected or not. In most cases external PS/2 mouse is not connected so
driver will create dev3 input device after first bare PS/2 packet will be
received. So there will not be "ghost" input device.

This change also helps in identifying possible problems in future if driver
decides to report 6-bytes trackstick packets as 3-bytes bare PS/2 (data
will be reported to dev3 instead dev2).

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:19 -08:00
Dmitry Torokhov
a09221e83e Input: ALPS - fix trackstick detection on some Dell Latitudes
On some Dell Latitudes we fail to identify presence of trackstick unless we
reset the device. The issue is quite benign as we do perform reset in
alps_init(), so the trackstick ends up working, but mouse name reported to
userspace is not accurate.

In order to fix the issue while avoiding the additional lengthy reset we
move the resrt to alps_detect() and keep the discovered state to be used
later in alps_init().

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:18 -08:00
Dmitry Torokhov
3296f71cd2 Input: ALPS - consolidate setting protocol parameters
Move setting of all protocol properties into alps_set_protocol (former
alps_set_defaults) instead of having it split between several functions.

Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:18 -08:00
Dmitry Torokhov
8326bb5741 Input: ALPS - split protocol data from model info
In preparation of reworking the way we set protocol parameters let's
split certain protocol items from alps_model_info into a separate
structure.

Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:17 -08:00
Dmitry Torokhov
fb2dd7a61d Input: ALPS - make Rushmore a separate protocol
Even though Rushmore is very close to V3 protocol it is sufficiently
different to warrant it's own protocol name.

Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:17 -08:00
Dmitry Torokhov
d7c13d3470 Input: ALPS - renumber protocol numbers
In order to accommodate new protocol number for Rushmore touchpads
let's shift protocol numbers by 8 bits (i.e. 1 -> 0x100) - this way
we keep protocol version reported in input device id the same as it
was, but add some holes in numbering.

Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-15 15:44:16 -08:00
Tejun Heo
0b480037e8 input: use %*pb[l] to print bitmaps including cpumasks and nodemasks
printk and friends can now format bitmaps using '%*pb[l]'.  cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.

* Line termination only requires one extra space at the end of the
  buffer.  Use PAGE_SIZE - 1 instead of PAGE_SIZE - 2 when formatting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:38 -08:00
Markus Elfring
de3748f66f Input: adi - remove an unnecessary check
The input_free_device() function tests whether its argument is NULL and
then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-11 23:07:13 -08:00
Dan Carpenter
2b2f514705 Input: pxa27x_keypad - remove an unneeded NULL check
Static checkers complain about this NULL check because we dereference it
without checking a couple lines later.  This function is only called
when "keypad->pdata" is non-NULL so we can just delete the NULL test.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[Dmitry: remove the variable altogether given that it is used just once and
 dereference directly.]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-11 23:07:12 -08:00
Bastien Nocera
791738be57 Input: soc_button_array - use "Windows" key for "Home"
KEY_HOME is the key to go back to the beginning of the line, not the key to
get into an overview mode, as Windows does. GNOME can already make use of
the Windows key on multiple form factors, and other desktop environments
can use it depending on the form factor.

Using "Windows" as the emitted key also means that the keycode sent out
matches the symbol on the key itself.

So switch KEY_HOME to KEY_LEFTMETA ("Windows" key).

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-10 15:45:00 -08:00
Dmitry Torokhov
4ba24fef3e Merge branch 'next' into for-linus
Prepare first round of input updates for 3.20.
2015-02-10 11:35:36 -08:00
Rasmus Villemoes
98a4a59ee3 Input: elan_i2c - fix wrong %p extension
There's no %px extension. From the context I think the intention was to
dump the five bytes which were not as expected, and for that one should use
%ph.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-06 15:32:18 -08:00
Dmitry Torokhov
b881d53770 Input: evdev - do not queue SYN_DROPPED if queue is empty
There is no point in queueing EV_SYN/SYN_DROPPED on clock type change when
there are no events in the client's queue and doing so confuses tests in
libinput package, so let's not do that.

Reported-and-tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-05 19:29:02 -08:00
Geert Uytterhoeven
6c8afa88ad Input: gscps2 - fix MODULE_DEVICE_TABLE invocation
The patch "module: fix types of device tables aliases" newly requires
that invocations of

MODULE_DEVICE_TABLE(type, name);

come *after* the definition of `name'.  That is reasonable, but gscps2
wasn't doing this.  Fix it.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-04 11:35:54 -08:00
Benjamin Tissoires
6ab17a8484 Input: synaptics - use dmax in input_mt_assign_slots
When tapping a clickpad with two fingers, there is a chance that the sensor
sees first only one finger, and at the next scan only the second one.  In
this case, the sensors says that there has been only one finger on the
clickpad, which moved really fast between two scans.

We can try to counter this by adding a limit to what an actual finger can
move between 2 scans.  A distance of 1cm between two scans for one finger
seems reasonable.  However, this is not really accurate because the
resolution in X and in Y differs. But heh, that's how the in-kernel
tracking works right now, and its job is quite good, even with this
approximation.

This parameter solves most of the jumps observed, not all of them however.
But this is a hardware defect, and we might not be able to get something
better without much heavier computations.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76722

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 15:36:32 -08:00
Rob Herring
d05426779b Input: pxa27x_keypad - remove unnecessary ARM includes
Remove some left-over ARM only includes in order to enable building on
ARM64. __raw_{read,write}l were getting implicitly included, so add
linux/io.h include.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 15:14:05 -08:00
Vignesh R
83edfdf30b Input: ti_am335x_tsc - replace delta filtering with median filtering
Previously, delta filtering was applied TSC co-ordinate readouts before
reporting a single value to user space. This patch replaces delta filtering
with median filtering. Median filtering sorts co-ordinate readouts, drops
min and max values, and reports the average of remaining values. This
method is more sensible than delta filtering. Median filtering is applied
only if number of readouts is greater than 3 else just average of
co-ordinate readouts is reported.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 11:50:39 -08:00
Vignesh R
bf223612a4 Input: ti_am335x_tsc - read charge delay from DT
This patch reads charge delay from tsc DT node and writes to
REG_CHARGEDELAY register. If the charge delay is not specified in DT then
default value of 0x400(CHARGEDLY_OPENDLY) is used.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 11:50:38 -08:00
Brad Griffis
344d635b9a Input: ti_am335x_tsc - remove udelay in interrupt handler
TSC interrupt handler had udelay to avoid reporting of false pen-up
interrupt to user space. This patch implements workaround suggesting in
Advisory 1.0.31 of silicon errata for am335x, thus eliminating udelay and
touchscreen lag. This also improves performance of touchscreen and
eliminates sudden jump of cursor at touch release.

IDLECONFIG and CHARGECONFIG registers are to be configured with same values
in order to eliminate false pen-up events. This workaround may result in
false pen-down to be detected, hence considerable charge step delay needs
to be added. The charge delay is set to 0xB000 (in terms of ADC clock
cycles) by default.

TSC steps are disabled at the end of every sampling cycle and EOS bit is
set. Once the EOS bit is set, the TSC steps need to be re-enabled to begin
next sampling cycle.

Signed-off-by: Brad Griffis <bgriffis@ti.com>
[vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 11:50:38 -08:00
Brad Griffis
3a59684ccc Input: ti_am335x_tsc - interchange touchscreen and ADC steps
This patch makes the initial changes required to workaround TSC-false
pen-up interrupts. It is required to implement these changes in order to
remove udelay in the TSC interrupt handler and false pen-up events.  The
charge step is to be executed immediately after sampling X+. Hence TSC is
made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate
readouts, 4 wire TSC configuration) and ADC to use lower ones. Further X
co-ordinate readouts must be the last to be sampled, thus co-ordinates are
sampled in the order Y-Z-X.

Signed-off-by: Brad Griffis <bgriffis@ti.com>
[vigneshr@ti.com: Ported the patch from v3.12 to v3.19rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-02-03 11:50:37 -08:00