All of the cpu_needs_another_gp() function's checks (except for
newly arrived callbacks) have been subsumed into the rcu_gp_cleanup()
function's scan of the rcu_node tree. This commit therefore drops the
call to cpu_needs_another_gp(). The check for newly arrived callbacks
is supplied by rcu_accelerate_cbs(). Any needed advancing (as in the
earlier rcu_advance_cbs() call) will be supplied when the corresponding
CPU becomes aware of the end of the now-completed grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
If rcu_start_this_gp() is invoked with a requested grace period more
than three in the future, then either the ->need_future_gp[] array
needs to be bigger or the caller needs to be repaired. This commit
therefore adds a WARN_ON_ONCE() checking for this condition.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_this_gp() function had a simple form of funnel locking that
used only the leaves and root of the rcu_node tree, which is fine for
systems with only a few hundred CPUs, but sub-optimal for systems having
thousands of CPUs. This commit therefore adds full-tree funnel locking.
This variant of funnel locking is unusual in the following ways:
1. The leaf-level rcu_node structure's ->lock is held throughout.
Other funnel-locking implementations drop the leaf-level lock
before progressing to the next level of the tree.
2. Funnel locking can be started at the root, which is convenient
for code that already holds the root rcu_node structure's ->lock.
Other funnel-locking implementations start at the leaves.
3. If an rcu_node structure other than the initial one believes
that a grace period is in progress, it is not necessary to
go further up the tree. This is because grace-period cleanup
scans the full tree, so that marking the need for a subsequent
grace period anywhere in the tree suffices -- but only if
a grace period is currently in progress.
4. It is possible that the RCU grace-period kthread has not yet
started, and this case must be handled appropriately.
However, the general approach of using a tree to control lock contention
is still in place.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_accelerate_cbs() function selects a grace-period target, which
it uses to have rcu_segcblist_accelerate() assign numbers to recently
queued callbacks. Then it invokes rcu_start_future_gp(), which selects
a grace-period target again, which is a bit pointless. This commit
therefore changes rcu_start_future_gp() to take the grace-period target as
a parameter, thus avoiding double selection. This commit also changes
the name of rcu_start_future_gp() to rcu_start_this_gp() to reflect
this change in functionality, and also makes a similar change to the
name of trace_rcu_future_gp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_gp_advanced() is invoked only from rcu_start_future_gp() and
much of its code is redundant when invoked from that context. This commit
therefore inlines rcu_start_gp_advanced() into rcu_start_future_gp(),
then removes rcu_start_gp_advanced().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Once the grace period has ended, any RCU_GP_FLAG_FQS requests are
irrelevant: The grace period has ended, so there is no longer any
point in forcing quiescent states in order to try to make it end sooner.
This commit therefore causes rcu_gp_cleanup() to clear any bits other
than RCU_GP_FLAG_INIT from ->gp_flags at the end of the grace period.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
It is true that currently only the low-order two bits are used, so
there should be no problem given modern machines and compilers, but
good hygiene and maintainability dictates use of an unsigned long
instead of an int. This commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The __rcu_process_callbacks() function currently checks to see if
the current CPU needs a grace period and also if there is any other
reason to kick off a new grace period. This is one of the fail-safe
checks that has been rendered unnecessary by the changes that increase
the accuracy of rcu_gp_cleanup()'s estimate as to whether another grace
period is required. Because this particular fail-safe involved acquiring
the root rcu_node structure's ->lock, which has seen excessive contention
in real life, this fail-safe needs to go.
However, one check must remain, namely the check for newly arrived
RCU callbacks that have not yet been associated with a grace period.
One might hope that the checks in __note_gp_changes(), which is invoked
indirectly from rcu_check_quiescent_state(), would suffice, but this
function won't be invoked at all if RCU is idle. It is therefore necessary
to replace the fail-safe checks with a simpler check for newly arrived
callbacks during an RCU idle period, which is exactly what this commit
does. This change removes the final call to rcu_start_gp(), so this
function is removed as well.
Note that lockless use of cpu_needs_another_gp() is racy, but that
these races are harmless in this case. If RCU really is idle, the
values will not change, so the return value from cpu_needs_another_gp()
will be correct. If RCU is not idle, the resulting redundant call to
rcu_accelerate_cbs() will be harmless, and might even have the benefit
of reducing grace-period latency a bit.
This commit also moves interrupt disabling into the "if" statement to
improve real-time response a bit.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
When __call_rcu_core() notices excessive numbers of callbacks pending
on the current CPU, we know that at least one of them is not yet
classified, namely the one that was just now queued. Therefore, it
is not necessary to invoke rcu_start_gp() and thus not necessary to
acquire the root rcu_node structure's ->lock. This commit therefore
replaces the rcu_start_gp() with rcu_accelerate_cbs(), thus replacing
an acquisition of the root rcu_node structure's ->lock with that of
this CPU's leaf rcu_node structure.
This decreases contention on the root rcu_node structure's ->lock.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_migrate_callbacks() function invokes rcu_advance_cbs()
twice, ignoring the return value. This is OK at pressent because of
failsafe code that does the wakeup when needed. However, this failsafe
code acquires the root rcu_node structure's lock frequently, while
rcu_migrate_callbacks() does so only once per CPU-offline operation.
This commit therefore makes rcu_migrate_callbacks()
wake up the RCU GP kthread when either call to rcu_advance_cbs()
returns true, thus removing need for the failsafe code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
There is no longer any need for ->need_future_gp[] to count the number of
requests for future grace periods, so this commit converts the additions
to assignments to "true" and reduces the size of each element to one byte.
While we are in the area, fix an obsolete comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Currently, the rcu_future_needs_gp() function checks only the current
element of the ->need_future_gps[] array, which might miss elements that
were offset from the expected element, for example, due to races with
the start or the end of a grace period. This commit therefore makes
rcu_future_needs_gp() use the need_any_future_gp() macro to check all
of the elements of this array.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Currently, rcu_gp_cleanup() scans the rcu_node tree in order to reset
state to reflect the end of the grace period. It also checks to see
whether a new grace period is needed, but in a number of cases, rather
than directly cause the new grace period to be immediately started, it
instead leaves the grace-period-needed state where various fail-safes
can find it. This works fine, but results in higher contention on the
root rcu_node structure's ->lock, which is undesirable, and contention
on that lock has recently become noticeable.
This commit therefore makes rcu_gp_cleanup() immediately start a new
grace period if there is any need for one.
It is quite possible that it will later be necessary to throttle the
grace-period rate, but that can be dealt with when and if.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_gp_kthread() function immediately sleeps waiting to be notified
of the need for a new grace period, which currently works because there
are a number of code sequences that will provide the needed wakeup later.
However, some of these code sequences need to acquire the root rcu_node
structure's ->lock, and contention on that lock has started manifesting.
This commit therefore makes rcu_gp_kthread() check for early-boot activity
when it starts up, omitting the initial sleep in that case.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
Accessors for the ->need_future_gp[] array are currently open-coded,
which makes them difficult to change. To improve maintainability, this
commit adds need_future_gp_mask() to compute the indexing mask from the
array size, need_future_gp_element() to access the element corresponding
to the specified grace-period number, and need_any_future_gp() to
determine if any future grace period is needed. This commit also applies
need_future_gp_element() to existing open-coded single-element accesses.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcu_start_future_gp() function uses a sloppy check for a grace
period being in progress, which works today because there are a number
of code sequences that resolve the resulting races. However, some of
these race-resolution code sequences must acquire the root rcu_node
structure's ->lock, and contention on that lock has started manifesting.
This commit therefore makes rcu_start_future_gp() check more precise,
eliminating the sloppy lockless check of the rcu_state structure's ->gpnum
and ->completed fields. The effect is that rcu_start_future_gp() will
sometimes unnecessarily attempt to start a new grace period, but this
overhead will be reduced later using funnel locking.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
When rcu_cbs_completed() is invoked on a non-root rcu_node structure,
it unconditionally assumes that two grace periods must complete before
the callbacks at hand can be invoked. This is overly conservative because
if that non-root rcu_node structure believes that no grace period is in
progress, and if the corresponding rcu_state structure's ->gpnum field
has not yet been incremented, then these callbacks may safely be invoked
after only one grace period has completed.
This change is required to permit grace-period start requests to use
funnel locking, which is in turn permitted to reduce root rcu_node ->lock
contention, which has been observed by Nick Piggin. Furthermore, such
contention will likely be increased by the merging of RCU-bh, RCU-preempt,
and RCU-sched, so it makes sense to take steps to decrease it.
This commit therefore improves the accuracy of rcu_cbs_completed() when
invoked on a non-root rcu_node structure as described above.
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
RCU's expedited grace periods can participate in out-of-memory deadlocks
due to all available system_wq kthreads being blocked and there not being
memory available to create more. This commit prevents such deadlocks
by allocating an RCU-specific workqueue_struct at early boot time, and
providing it with a rescuer to ensure forward progress. This uses the
shiny new init_rescuer() function provided by Tejun (but indirectly).
This commit also causes SRCU to use this new RCU-specific
workqueue_struct. Note that SRCU's use of workqueues never blocks them
waiting for readers, so this should be safe from a forward-progress
viewpoint. Note that this moves SRCU from system_power_efficient_wq
to a normal workqueue. In the unlikely event that this results in
measurable degradation, a separate power-efficient workqueue will be
creates for SRCU.
Reported-by: Prateek Sood <prsood@codeaurora.org>
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Commits c0b334c5bf and ea9b0c8a26 introduced new sparse warnings
by accessing rcu_node->lock directly and ignoring the __private
marker. Introduce a new wrapper and use it. Also fix a similar problem
in srcutree.c introduced by a3883df393.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is not always obvious that the stack dump from a starved grace-period
kthread isn't instead that of a CPU stalling the current grace period.
This commit therefore adds a pr_err() flagging these dumps.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The debugfs interface displayed statistics on RCU-pending checks but
this interface has since been removed. This commit therefore removes the
no-longer-used rcu_state structure's ->n_force_qs_lh and ->n_force_qs_ngp
fields along with their updates. (Though the ->n_force_qs_ngp field
was actually not used at all, embarrassingly enough.)
If this information proves necessary in the future, the corresponding
event traces will be added.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The debugfs interface displayed statistics on RCU-pending checks
but this interface has since been removed. This commit therefore
removes the no-longer-used rcu_data structure's ->n_rcu_pending,
->n_rp_core_needs_qs, ->n_rp_report_qs, ->n_rp_cb_ready,
->n_rp_cpu_needs_gp, ->n_rp_gp_completed, ->n_rp_gp_started,
->n_rp_nocb_defer_wakeup, and ->n_rp_need_nothing fields along with
their updates.
If this information proves necessary in the future, the corresponding
event traces will be added.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The debugfs interface displayed statistics on RCU callback invocation but
this interface has since been removed. This commit therefore removes the
no-longer-used rcu_data structure's ->n_cbs_invoked and ->n_nocbs_invoked
fields along with their updates.
If this information proves necessary in the future, the corresponding
event traces will be added.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Since rcu_boot_init_percpu_data() is only called at boot time,
there is no data race and spinlock is not needed.
Signed-off-by: Lihao Liang <lianglihao@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The following statement has for some reason proven non-intuitive:
WARN_ON_ONCE(rcu_segcblist_empty(&rdp->cblist) != (count == 0));
This commit therefore adds a comment that states that this warning
usually triggers in response to a double call_rcu(), which is sort
of like a double free. The comment also suggests building with
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y to track down the double call_rcu().
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The code that checks for non-idle non-nohz_idle-usermode tasks invoking
rcu_eqs_enter() and rcu_eqs_exit() prints a considerable quantity of
helpful information. However, these checks fire rarely, so the extra
complexity is no longer worth it. This commit therefore replaces this
debug code with simple WARN_ON_ONCE() statements.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is now only one call to rcu_eqs_exit_common() and there is no other
reason to keep it separate. This commit therefore inlines it into its
sole call site, saving a few lines of code in the process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is now only one call to rcu_eqs_enter_common() and there is no other
reason to keep it separate. This commit therefore inlines it into its
sole call site, saving a few lines of code in the process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although ->dynticks_nesting is updated only by process level, it is
accessed from hardirq to check for interrupt-from-idle quiescent states.
Store tearing is thus possible, so this commit applies WRITE_ONCE()
to ->dynticks_nesting stores.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The three RCU_LOCKDEP_WARN() calls in rcu_eqs_enter_common() are
redundant with other lockdep checks, so this commit removes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because the ->dynticks_nesting field now only contains the process-based
nesting level instead of a value encoding both the process nesting level
and the irq "nesting" level, we no longer need a long long, even on
32-bit systems. This commit therefore changes both the ->dynticks_nesting
and ->dynticks_nmi_nesting fields to long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the irq path uses the rcu_nmi_{enter,exit}() algorithm,
rcu_irq_enter() and rcu_irq_exit() may be used from any context. There is
thus no need for rcu_irq_enter_disabled() and for the checks using it.
This commit therefore eliminates rcu_irq_enter_disabled().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that ->dynticks_nesting counts only process-level dyntick-idle
entry and exit, there is no need for the elaborate segmented counter
with its guard fields and overflow checking. This commit therefore
makes ->dynticks_nesting be a simple counter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU currently uses two different mechanisms for tracking irqs and NMIs.
This is unnecessary complexity: Given that NMIs can nest and given that
RCU's tracking handles such nesting, the NMI tracking mechanism can also
be used to track irqs. This commit therefore defines rcu_irq_enter()
in terms of rcu_nmi_enter() and rcu_irq_exit() in terms of rcu_nmi_exit().
Unfortunately, callers must still distinguish between the irq and NMI
functions because additional actions are taken when an irq interrupts
idle or nohz_full usermode execution, and these actions cannot always
be taken from NMI handlers.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In preparation for merging dyntick-idle irq handling into the NMI
algorithm, clamp ->dynticks_nmi_nesting value to allow for interrupts
that enter but never leave and vice versa.
It is important that the clamping happen outside of the extended quiescent
state. Otherwise, there will be short windows where irqs and NMIs fail
to convince RCU to start watching.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This is a code-motion-only commit that prepares to define rcu_irq_enter()
in terms of rcu_nmi_enter() and rcu_irq_exit() in terms of rcu_irq_exit().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Both extended-quiescent-state entry and exit first update the nesting
counter and then adjust the dyntick-idle state. This means that there
are four states: (1) Both nesting and dyntick idle indicate idle,
(2) Nesting indicates idle but dyntick idle does not, (3) Nesting indicates
non-idle and dyntick idle does not, and (4) Both nesting and dyntick
idle indicate non-idle. This commit simplifies the state space by
eliminating #3, reversing the order of updates on exit from extended
quiescent state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
NMIs can nest, and store tearing could in theory happen on carries
from one byte to the next. This commit therefore adds the WRITE_ONCE()
macros preventing this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Lockdep now has an integrated IRQs disabled/enabled sanity check. Just
use it instead of the ad-hoc RCU version.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-15-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because many of RCU's files have not been included into docbook, a
number of errors have accumulated. This commit fixes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you add or remove calls to rcu_idle_enter(), rcu_user_enter(),
rcu_irq_exit(), rcu_irq_exit_irqson(), rcu_idle_exit(), rcu_user_exit(),
rcu_irq_enter(), rcu_irq_enter_irqson(), rcu_nmi_enter(), or
rcu_nmi_exit(), you should run a full set of tests on a kernel built
with CONFIG_RCU_EQS_DEBUG=y.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
One common question upon seeing an RCU CPU stall warning is "did
the stalled CPUs have interrupts disabled?" However, the current
stall warnings are silent on this point. This commit therefore
uses irq_work to check whether stalled CPUs still respond to IPIs,
and flags this state in the RCU CPU stall warning console messages.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is some confusion as to which of cond_resched() or
cond_resched_rcu_qs() should be added to long in-kernel loops.
This commit therefore eliminates the decision by adding RCU quiescent
states to cond_resched(). This commit also simplifies the code that
used to interact with cond_resched_rcu_qs(), and that now interacts with
cond_resched(), to reduce its overhead. This reduction is necessary to
allow the heavier-weight cond_resched_rcu_qs() mechanism to be invoked
everywhere that cond_resched() is invoked.
Part of that reduction in overhead converts the jiffies_till_sched_qs
kernel parameter to read-only at runtime, thus eliminating the need for
bounds checking.
Reported-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
[ paulmck: Keep PREEMPT=n cond_resched a no-op, per Peter Zijlstra. ]
- A memory fix with left over code from spliting out ftrace_ops
and function graph tracer, where the function graph tracer could
reset the trampoline pointer, leaving the old trampoline not to
be freed (memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to rebase
the branch to update the patch that added it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlnU++sUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjcujzgf/ebIzGKe5vQKNrL4ITAcIz0T7Hvzl
pWw4uJp8kqO9x9EHMnztAkltQigvjvgDKZozJpUGgtNsFLuvdgQSBMK24YV8vLHs
UmXEnQ2tSB/2Sg2ccEnpjVXaMzL9aqlbeTmACbdd9UgZnvPiUYPejq2jFfECFQjb
k/gZT911ukBtx4mXYKzGFbTEZHdc/YUs6Y/wzB1ox5BBIUh71ZDZXxQTUHfXHlwS
Cst69/9dKl4nBEGDGas6/95iR+ORVv85osI/pqPtjSj4EkRnWfVRotaH1kNuSQil
gDIHSoy35NfXJx77/5IFHfrjFBAkr0IYRNL/jZaWazwM7rdqfAN8TwMQuA==
=4CtF
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixlets from Steven Rostedt:
"Two updates:
- A memory fix with left over code from spliting out ftrace_ops and
function graph tracer, where the function graph tracer could reset
the trampoline pointer, leaving the old trampoline not to be freed
(memory leak).
- The update to Paul's patch that added the unnecessary READ_ONCE().
This removes the unnecessary READ_ONCE() instead of having to
rebase the branch to update the patch that added it"
* tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()
ftrace: Fix kmemleak in unregister_ftrace_graph
