A few odd cases:
- mgag200 someho had a totally unused drm_dma_handle_t. Remove it.
- i915 still uses the legacy pci dma alloc api, so grows an include.
Everything else fairly standard.
v2: Include "drm_legacy.h" in drm.ko source files for consistency.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And replace the drm_core_ prefix with drm_legacy_ since really, this
isn't core stuff.
Also drop drm_core_dropmap since it's unused.
v2: Fix up i810.ko fully which somehow slipped through.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we push down the ioctl table in drm_ioctl.c all the forward
declarations in drmP.h are not required any more.
v2: Fold in fixup from Fenugguang Wu to declare functions as static.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes CVE-2014-3631.
It is possible for an associative array to end up with a shortcut node at the
root of the tree if there are more than fan-out leaves in the tree, but they
all crowd into the same slot in the lowest level (ie. they all have the same
first nibble of their index keys).
When assoc_array_gc() returns back up the tree after scanning some leaves, it
can fall off of the root and crash because it assumes that the back pointer
from a shortcut (after label ascend_old_tree) must point to a normal node -
which isn't true of a shortcut node at the root.
Should we find we're ascending rootwards over a shortcut, we should check to
see if the backpointer is zero - and if it is, we have completed the scan.
This particular bug cannot occur if the root node is not a shortcut - ie. if
you have fewer than 17 keys in a keyring or if you have at least two keys that
sit into separate slots (eg. a keyring and a non keyring).
This can be reproduced by:
ring=`keyctl newring bar @s`
for ((i=1; i<=18; i++)); do last_key=`keyctl newring foo$i $ring`; done
keyctl timeout $last_key 2
Doing this:
echo 3 >/proc/sys/kernel/keys/gc_delay
first will speed things up.
If we do fall off of the top of the tree, we get the following oops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
PGD dae15067 PUD cfc24067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: xt_nat xt_mark nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_rpfilter ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_ni
CPU: 0 PID: 26011 Comm: kworker/0:1 Not tainted 3.14.9-200.fc20.x86_64 #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: events key_garbage_collector
task: ffff8800918bd580 ti: ffff8800aac14000 task.ti: ffff8800aac14000
RIP: 0010:[<ffffffff8136cea7>] [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
RSP: 0018:ffff8800aac15d40 EFLAGS: 00010206
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800aaecacc0
RDX: ffff8800daecf440 RSI: 0000000000000001 RDI: ffff8800aadc2bc0
RBP: ffff8800aac15da8 R08: 0000000000000001 R09: 0000000000000003
R10: ffffffff8136ccc7 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000070 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000018 CR3: 00000000db10d000 CR4: 00000000000006f0
Stack:
ffff8800aac15d50 0000000000000011 ffff8800aac15db8 ffffffff812e2a70
ffff880091a00600 0000000000000000 ffff8800aadc2bc3 00000000cd42c987
ffff88003702df20 ffff88003702dfa0 0000000053b65c09 ffff8800aac15fd8
Call Trace:
[<ffffffff812e2a70>] ? keyring_detect_cycle_iterator+0x30/0x30
[<ffffffff812e3e75>] keyring_gc+0x75/0x80
[<ffffffff812e1424>] key_garbage_collector+0x154/0x3c0
[<ffffffff810a67b6>] process_one_work+0x176/0x430
[<ffffffff810a744b>] worker_thread+0x11b/0x3a0
[<ffffffff810a7330>] ? rescuer_thread+0x3b0/0x3b0
[<ffffffff810ae1a8>] kthread+0xd8/0xf0
[<ffffffff810ae0d0>] ? insert_kthread_work+0x40/0x40
[<ffffffff816ffb7c>] ret_from_fork+0x7c/0xb0
[<ffffffff810ae0d0>] ? insert_kthread_work+0x40/0x40
Code: 08 4c 8b 22 0f 84 bf 00 00 00 41 83 c7 01 49 83 e4 fc 41 83 ff 0f 4c 89 65 c0 0f 8f 5a fe ff ff 48 8b 45 c0 4d 63 cf 49 83 c1 02 <4e> 8b 34 c8 4d 85 f6 0f 84 be 00 00 00 41 f6 c6 01 0f 84 92
RIP [<ffffffff8136cea7>] assoc_array_gc+0x2f7/0x540
RSP <ffff8800aac15d40>
CR2: 0000000000000018
---[ end trace 1129028a088c0cbd ]---
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Drivers really, really have no business even looking at this lock. And
thankfully they don't.
So unexport it and move the declaration to drm_internal.h.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This way drivers can't grow crazy ideas any more, and it also
helps a bit in reviewing EXPORT_SYMBOLS.
v2: Even more stuff. Unfortunately we can't move drm_vm_open_locked
because exynos does some horrible stuff with it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows us to drop 2 header declarations from drmP.h. The 3rd one
is also used in drm_ioctl.c, so for that create a new drm_internal.h
header for non-legacy non-kms (since we have internal headers for
those parts already) declarations private to drm.ko.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No user at all.
My guess is that this is a leftover from ttm before it used
the more abstract helpers to register/unregister its sysfs
objects (see drm_sysfs.h). At least in the existing history
it was never used.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also sprinkle the customary legacy_ prefix.
Unfortunately we can't move the other functions since i915 is still
using them. Shame on me for that one :(
v2: Fix patch subject as spotted by David Herrmann.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And move a few legayc functions to start things over there.
It compiles ...
Inspired by a patch from Dave Airlie, but with a split between drm.ko
private legacy functions and stuff used by drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also sprinkle the drm_legacy_ prefix where missing.
v2: Drop extern from function declarations and include "drm_legacy.h"
in drm_scatter.c, spotted by David.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Also drop the unneeded EXPORT_SYMBOL and sprinkle drm_legacy_ prefixes
where missing.
v2: Drop the confusing _core_ and drop extern, both suggested by
David.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So updated vblank-rework pull request, now with the polish that Mario
requested applied (and reviewed by him). Also with backmerge like you've
requested for easier merging.
The neat thing this finally allows is to immediately disable the vblank
interrupt on the last drm_vblank_put if the hardware has perfectly
accurate vblank counter and timestamp readout support. On i915 that
required piles of small adjustements from Ville since depending upon the
platform and port the vblank happens at different scanout lines.
Of course this is fully opt-in and per-device (we need that since gen2
doesn't have a hw vblank counter).
* tag 'topic/vblank-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel: (22 commits)
drm: Clarify vblank ts/scanoutpos sampling #defines
drm: Simplify return value of drm_get_last_vbltimestamp
drm: Only update final vblank count when precise ts is available
drm: Really never disable vblank irqs for offdelay==0
drm: Use vblank_disable_and_save in drm_vblank_cleanup()
drm: Remove drm_vblank_cleanup from drm_vblank_init error path.
drm: Store the vblank timestamp when adjusting the counter during disable
drm: Fix confusing debug message in drm_update_vblank_count()
drm/i915: Update scanline_offset only for active crtcs
drm: Kick start vblank interrupts at drm_vblank_on()
drm/i915: Opt out of vblank disable timer on >gen2
drm: Add dev->vblank_disable_immediate flag
drm: Disable vblank interrupt immediately when drm_vblank_offdelay<0
drm: Fix race between drm_vblank_off() and drm_queue_vblank_event()
drm: Fix deadlock between event_lock and vbl_lock/vblank_time_lock
drm: Reduce the amount of dev->vblank[crtc] in the code
drm: Avoid random vblank counter jumps if the hardware counter has been reset
drm: Have the vblank counter account for the time between vblank irq disable and drm_vblank_off()
drm: Move drm_update_vblank_count()
drm: Don't clear vblank timestamps when vblank interrupt is disabled
...
The DT-based panel capabilities selection was picking up
a subset of available modes based on hardware configuration.
This was wrong, as the capabilities describe available
memory models and adapt the display controller to them
that the RGB output is wired up correctly (as in: R and
B components are not swapped).
This patch fixes it by removing the unnecessary limitation.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This fixes problems on ppc64 platforms, where we could end up using
a WC mapping for migrating BOs with memcpy, when really we want to
use cached memory.
Tested-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just move this into a separate header file, and make the
two users use it.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
concurrent buffer reads.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow concurrent buffer reads
drm/radeon: add the infrastructure for concurrent buffer access
drm/ttm: allow fence to be added as shared
The userspace drm.h include doesn't prefix the drm directory. This can lead
to compile failures as /usr/include/drm/ isn't in the standard gcc include
paths. Fix it to be <drm/drm.h>, which matches the rest of the driver drm
header files that get installed into /usr/include/drm.
Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1138759
Fixes: 1d7a5cbf8f
Reported-by: Jeffrey Bastian <jbastian@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Type error and cause AST2000 cannot be detected correctly
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Egbert Eich <eich@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some config settings like 3rd TX chips will not get correctly
if the extended reg is protected
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Egbert Eich <eich@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull Ceph fixes from Sage Weil:
"The main thing here is a set of three patches that fix a buffer
overrun for large authentication tickets (sigh).
There is also a trivial warning fix and an error path fix that are
both regressions"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: do not hard code max auth ticket len
libceph: add process_one_ticket() helper
libceph: gracefully handle large reply messages from the mon
rbd: fix error return code in rbd_dev_device_setup()
rbd: avoid format-security warning inside alloc_workqueue()
- Fix for PVHVM suspend/resume and migration
- Don't pointlessly retry certain ballooning ops
- Fix gntalloc when grefs have run out.
- Fix PV boot if KSALR is enable or very large modules are used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUEZw4AAoJEFxbo/MsZsTRoHkIAJ5h287Wer2Yf4ALlFI47Esl
AhcgVKi7WMJ6mBQUk/xpbSS3MZEuTuPJVbuiabJwRaZk9vX7w8q08yrAD8SOrCwY
6iGooaWEZ96P5DPI5fmWBuOgt5f2wfqzAp//wl/dK/kzr6Kw63huTXa0H0fmd8BY
Gy13pN4JEPDyvjjZWFvDcrcEUA9eTcTaXQZisBUGuGictXySr5ovz9G3EKOtJP0D
vkmDzApijFEEjJwZMGazgipng4mwh94fW4+7bs57s6iREpMzOJDTRKrl9suaXdza
5HA2ed7Au/qL8IwiQAFGxQpMBqNQxEGerlFfPBhRPuGQ+Ek3/pZF3BTU56w/nt4=
=y/Ol
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.17-b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bug fixes from David Vrabel:
- fix for PVHVM suspend/resume and migration
- don't pointlessly retry certain ballooning ops
- fix gntalloc when grefs have run out.
- fix PV boot if KSALR is enable or very large modules are used.
* tag 'stable/for-linus-3.17-b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: don't copy bogus duplicate entries into kernel page tables
xen/gntalloc: safely delete grefs in add_grefs() undo path
xen/gntalloc: fix oops after runnning out of grant refs
xen/balloon: cancel ballooning if adding new memory failed
xen/manage: Always freeze/thaw processes when suspend/resuming
Pull powerpc fixes from Michael Ellerman:
"Ben's travelling so this is my first attempt at a pull request.
There's nothing too exciting. The CONFIG_FHANDLE one is annoying, I
know you love defconfig changes. But we've had a couple of developers
waste time debugging boxes that wouldn't boot, only to realise it's
just that systemd needs CONFIG_FHANDLE and our defconfigs don't have
it.
The new syscalls seem to be working, I've run the selftests that
exist, and also let trinity bash on them for a while"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: Wire up sys_seccomp(), sys_getrandom() and sys_memfd_create()
powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs
powerpc: use machine_subsys_initcall() for opal_hmi_handler_init()
powerpc/perf: Fix ABIv2 kernel backtraces
powerpc/pseries: Fix endian issues in memory hotplug
Some late fixes for dwc3 so we have something more stable
on v3.17-final.
Most bugs have been there for quite a while and nobody
noticed, except for TRB completion when multiple TRBs
are started.
Patches were tested on AM437x SK and J6 EVM and are passing
my tests.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CdSO
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.17-rc4
Some late fixes for dwc3 so we have something more stable
on v3.17-final.
Most bugs have been there for quite a while and nobody
noticed, except for TRB completion when multiple TRBs
are started.
Patches were tested on AM437x SK and J6 EVM and are passing
my tests.
Signed-of-by: Felipe Balbi <balbi@ti.com>
Resuming from hibernate (S4) will restart and re-initialize xHC.
The device contexts are freed and will be re-allocated later during device reset.
Usb core will disable link pm in device resume before device reset, which will
try to change the max exit latency, accessing the device contexts before they are re-allocated.
There is no need to zero (disable) the max exit latency when disabling hw lpm
for a freshly re-initialized xHC. So check that device context exists before
doing anything. The max exit latency will be set again after device reset when usb core
enables the link pm.
Reported-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xhci driver will OOPS on resume from S2/S3 if dma_alloc_coherent()
is out of memory. This is a result of two things:
1. xhci_mem_cleanup() in xhci-mem.c free's xhci->lpm_command if
it's not NULL, but doesn't set it to NULL after the free.
2. xhci_mem_cleanup() is called twice on resume, once for normal
restart and once from xhci_mem_init() if dma_alloc_coherent() fails,
resulting in a free of xhci->lpm_command that has already been freed.
The fix is to set xhci->lpm_command to NULL after freeing it.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If xhci initialization fails before the roothub bandwidth
domains (xhci->rh_bw[i]) are allocated it will oops when
trying to access rh_bw members in xhci_mem_cleanup().
Reported-by: Manuel Reimer <manuel.reimer@gmx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware
seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/
SCM chip set. However its firmware restricts it to only work with Jaz
drives.
On connecting the cable a message like this appears four times in the log:
reset full speed USB device number 4 using uhci_hcd
That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it.
Signed-off-by: Mark Knibbs <markk@clara.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix for the cpufreq Operation Performance Points (OPP) code
where a recent commit added a kcalloc() call with an incorrect
ordering of arguments. From Anand Moon.
- Reverts of two ACPI battery commits that caused incorrect
diagnostic information to be printed to dmesg in some cases
from Bjørn Mork.
- Fix for the ACPI RTC operation region handler that applied the
& operator to an argument already representing an address and
that caused it to overwrite its own argument instead of writing
to the address contained in it as expected. From Chun-Yi Lee.
- Fix for the PM domain implementation in the ACPI LPSS (Low-Power
Subsystem) driver where one callback pointer pointed to a wrong
routine and one was NULL, but it shouldn't. From Fu Zhonghui.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=FgS1
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are regression fixes (cpufreq, ACPI battery) and fixes for stuff
that never worked correctly (ACPI RTC operation region handler and PM
domain implementation in the ACPI LPSS driver).
Specifics:
- Fix for the cpufreq Operation Performance Points (OPP) code where a
recent commit added a kcalloc() call with an incorrect ordering of
arguments. From Anand Moon.
- Reverts of two ACPI battery commits that caused incorrect
diagnostic information to be printed to dmesg in some cases from
Bjørn Mork.
- Fix for the ACPI RTC operation region handler that applied the &
operator to an argument already representing an address and that
caused it to overwrite its own argument instead of writing to the
address contained in it as expected. From Chun-Yi Lee.
- Fix for the PM domain implementation in the ACPI LPSS (Low-Power
Subsystem) driver where one callback pointer pointed to a wrong
routine and one was NULL, but it shouldn't. From Fu Zhonghui"
* tag 'pm+acpi-3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: complete PM entries for LPSS power domain
Revert "ACPI / battery: fix wrong value of capacity_now reported when fully charged"
Revert "ACPI / battery: Fix warning message in acpi_battery_get_state()"
ACPI / RTC: Fix CMOS RTC opregion handler accesses to wrong addresses
cpufreq / OPP: Fix the order of arguments for kcalloc()
Remove the rbtree used to keep track of machine to physical mappings:
the frontend can grant the same page multiple times, leading to errors
inserting or removing entries from the mach_to_phys tree.
Linux only needed to know the physical address corresponding to a given
machine address in swiotlb-xen. Now that swiotlb-xen can call the
xen_dma_* functions passing the machine address directly, we can remove
it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Denis Schneider <v1ne2go@gmail.com>
xen_dma_unmap_page, xen_dma_sync_single_for_cpu and
xen_dma_sync_single_for_device are currently implemented by calling into
the corresponding generic ARM implementation of these functions. In
order to do this, firstly the dma_addr_t handle, that on Xen is a
machine address, needs to be translated into a physical address. The
operation is expensive and inaccurate, given that a single machine
address can correspond to multiple physical addresses in one domain,
because the same page can be granted multiple times by the frontend.
To avoid this problem, we introduce a Xen specific implementation of
xen_dma_unmap_page, xen_dma_sync_single_for_cpu and
xen_dma_sync_single_for_device, that can operate on machine addresses
directly.
The new implementation relies on the fact that the hypervisor creates a
second p2m mapping of any grant pages at physical address == machine
address of the page for dom0. Therefore we can access memory at physical
address == dma_addr_r handle and perform the cache flushing there. Some
cache maintenance operations require a virtual address. Instead of using
ioremap_cache, that is not safe in interrupt context, we allocate a
per-cpu PAGE_KERNEL scratch page and we manually update the pte for it.
arm64 doesn't need cache maintenance operations on unmap for now.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Denis Schneider <v1ne2go@gmail.com>
The flag tells us that the hypervisor maps a grant page to guest
physical address == machine address of the page in addition to the
normal grant mapping address. It is needed to properly issue cache
maintenance operation at the completion of a DMA operation involving a
foreign grant.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Denis Schneider <v1ne2go@gmail.com>
Nathan reports that we leak TLS information from the parent context
during an exec, as we don't clear the TLS registers when flushing the
thread state.
This patch updates the flushing code so that we:
(1) Unconditionally zero the tpidr_el0 register (since this is fully
context switched for native tasks and zeroed for compat tasks)
(2) Zero the tp_value state in thread_info before clearing the
tpidrr0_el0 register for compat tasks (since this is only writable
by the set_tls compat syscall and therefore not fully switched).
A missing compiler barrier is also added to the compat set_tls syscall.
Cc: <stable@vger.kernel.org>
Acked-by: Nathan Lynch <Nathan_Lynch@mentor.com>
Reported-by: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull dmaengine fixes from Vinod Koul:
"Two minor fixes.
First one from Kuninori clarifying dmas bindings and second from Lars
for fixing dma descriptor completion in non cyclic case"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: jz4740: Fix non-cyclic descriptor completion
dt/bindings: rcar-audmapp: tidyup dmas explanation
- Fix a warning about unbalanced IRQs on the Baytrail
- Update Tomasz Figa's address in MAINTAINERS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MrRB
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull two pin control fixes from Linus Walleij:
- fix a warning about unbalanced IRQs on the Baytrail
- update Tomasz Figa's address in MAINTAINERS
* tag 'pinctrl-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Tomasz has moved
pinctrl: baytrail: resolve unbalanced IRQ wake disable warning
Pull input updates from Dmitry Torokhov:
"An update to Synaptics PS/2 driver to handle "ForcePads" (currently
found in HP EliteBook 1040 laptops), a change for Elan PS/2 driver to
detect newer touchpads, bunch of devices get annotated as Trackpoint
and/or Pointer to help userspace classify and handle them, plus
assorted driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: serport - add compat handling for SPIOCSTYPE ioctl
Input: atmel_mxt_ts - fix double free of input device
Input: synaptics - add support for ForcePads
Input: matrix_keypad - use request_any_context_irq()
Input: atmel_mxt_ts - downgrade warning about empty interrupts
Input: wm971x - fix typo in module parameter description
Input: cap1106 - fix register definition
Input: add missing POINTER / DIRECT properties to a bunch of drivers
Input: add INPUT_PROP_POINTING_STICK property
Input: elantech - fix detection of touchpad on ASUS s301l
This allows us to specify if we want to sync to
the shared fences of a reservation object or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new flag to the ttm_validate_buffer list to
add the fence as shared to the reservation object.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave asked me to do the backmerge before sending him the revised pull
request, so here we go. Nothing fancy in the conflicts, just a few
things changed right next to each another.
Conflicts:
drivers/gpu/drm/drm_irq.c
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
I've read INVBL as "invalid backlight" and got mightly confused.
The #defines are already fairly long and we can afford to extend
them a bit more without resulting in ugly code all over.
I'm not sure how useful the complicated bitmask return value of these
functions really are since no one checks them. But for now let's keep
things as is.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imo u32 hints at a register value, but in reality all callers only
care whether the sampled timestamp is precise or not. So give them
just a bool.
Also move the declaration out of drmP.h, it's only used in drm_irq.c.
v2: Also drop the EXPORT_SYMBOL, spotted by Mario.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Drivers without a hardware vblank counter simply can't account for the
vblanks that happened while the vblank interrupt was off. To check
this grab a vblank timestamp and if the result is dubious follow the
normal save-and-disable logic.
Drivers should prevent this by setting vblank_disable_allowed = false,
but since running vblank interrupts constantly is not good for power
consumption most drivers lie. Testing for precise vblank timestamps is
the next best thing we can check for.
Suggested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
With the new support for immediate vblank disabling we always disabled
the vblank interrupt right away, irrespective of the vblank offdelay
setting.
But being able to let vblanks run forever is fairly useful for
debugging, so restore that behaviour.
Suggested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
1) add LVDS support for mdp4 (tested with auo B101XTN01.0 panel)
2) add B101XTN01.0 panel
3) bit of gpu refactoring to prepare for addition of addition gpu
generations beyond just a3xx
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm/adreno: push dump/show stuff to base class
drm/msm/adreno: bit of init refactoring
drm/msm/adreno: move decision about what gpu to to load
drm/msm/adreno: split adreno device out into it's own file
drm/panel/simple: add optronics B101XTN01.0 (v3)
drm/msm/mdp4: add LVDS panel support
drm/msm/mdp4: fix blend setup with multiple crtcs
drm/msm: update generated headers
A couple more little fixes:
1) fix from llvm/clang folks
2) fix build if common clock framework is not used
3) if vram carveout is used, have default size for vram carveout
* 'msm-fixes-3.17-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: don't crash if no msm.vram param
drm/msm/hdmi: fix build break on non-CCF platforms
drm/msm: Change nested function to static function
