Add the zone_max_open module parameters to control the maximum number of
open zones of a ZBC device. This parameter is ignored for device types
other than 0x14 (zbc=2 case).
Link: https://lore.kernel.org/r/20200422104221.378203-5-damien.lemoal@wdc.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the zbc module parameter to take either:
0: none (probably a conventional disk)
1: host-aware
2: host-managed
These values are chosen to match 'enum blk_zoned_model' found in
include/linux/blkdev.h . Instead of "none", "no" or "0" can be given.
Instead of "host-aware", "aware or "1" can be given. Instead of
"host-managed", "managed" or "2" can be given.
Note: the zbc parameter can only be given at driver/module load time; it
cannot be changed via sysfs thereafter.
At this time there is no ZBC "host-aware" implementation so that string (or
the value '1') results in a modprobe error.
Link: https://lore.kernel.org/r/20200422104221.378203-4-damien.lemoal@wdc.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the 5 ZBC commands and enough functionality to emulate a
host-managed device with one conventional zone and a set of sequential
write-required zones up to the disk capacity.
Link: https://lore.kernel.org/r/20200422104221.378203-3-damien.lemoal@wdc.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ZBC standard "piggy-backs" on many, but not all, of the facilities in
SBC. Add those ZBC mode pages (plus mode parameter block descriptors
(e.g. "WP")) and VPD pages in common with SBC. Add ZBC specific VPD page
for the host-managed ZBC device type (ptype=0x14).
Link: https://lore.kernel.org/r/20200422104221.378203-2-damien.lemoal@wdc.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The scsi_debug driver version is visible in:
/sys/modules/scsi_debug/version
and can thus be used by user space programs to alter the features they try
to use. Since the per_host_store and zbc/zone options are significant
additions, bump the version number to 1.89 .
Link: https://lore.kernel.org/r/20200421151424.32668-9-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This module has a lot of parameters and when searching for one, the author
prefers them in alphabetical order. This can lead to somewhat illogical
ordering (e.g. inq_product before inq_vendor). However it is not clear what
another sensible total logical ordering would be.
Link: https://lore.kernel.org/r/20200421151424.32668-8-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Many disks implement the SCSI PRE-FETCH commands. One use case might be a
disk-to-disk compare, say between disks A and B. Then this sequence of
commands might be used: PRE-FETCH(from B, IMMED), READ(from A), VERIFY
(BYTCHK=1 on B with data returned from READ). The PRE-FETCH (which returns
quickly due to the IMMED) fetches the data from the media into B's cache
which should speed the trailing VERIFY command. The next chunk of the
compare might be done in parallel, with A and B reversed.
The implementation tries to bring the specified range in main memory into
the cache(s) associated with this machine's CPU(s) using the
prefetch_range() function.
Link: https://lore.kernel.org/r/20200421151424.32668-7-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previously the code did the work implied by the given SCSI command and
after that it waited for a timer based on the user specified command
duration to be exhausted before informing the mid-level that the command
was complete. For short command durations, the time to complete the work
implied by the SCSI command could be significant compared to the user
specified command duration.
For example a WRITE of 128 blocks (say 512 bytes each) on a machine that
can copy from main memory to main memory at a rate of 10 GB/sec will take
around 6.4 microseconds to do that copy. If the user specified a command
duration of 5 microseconds (ndelay=5000), should the driver do a further
delay of 5 microseconds after the copy or return immediately because 6.4 >
5 ?
The action prior to this patch was to always do the timer based
delay. After this patch, for ndelay values less than 1 millisecond, this
driver will complete the command immediately. And in the case where the
user specified delay was 7 microseconds, a timer delay of 600 nanoseconds
will be set ((7 - 6.4) * 1000).
Link: https://lore.kernel.org/r/20200421151424.32668-6-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The design of this driver is to do any ramdisk access on the same thread
that invoked the queuecommand() call. That is assumed to be user space
context. The command duration is implemented by setting the delay with a
high resolution timer. The hr timer's callback may well be in interrupt
context, but it doesn't touch the ramdisk. So try removing the
_irqsave()/_irqrestore() portion on the read-write lock that protects
ramdisk access.
Link: https://lore.kernel.org/r/20200421151424.32668-5-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With the addition of the per_host_store option, the ability to check
whether two different ramdisk images are the same or not becomes
practical. Prior to this patch VERIFY(10) always returned true (i.e. the
SCSI GOOD status) without checking. This option adds support for BYTCHK
equal to 0, 1 and 3. If the comparison fails, then a sense key of
MISCOMPARE is returned as per the T10 standards. Also add support for the
VERIFY(16) command.
Link: https://lore.kernel.org/r/20200421151424.32668-4-dgilbert@interlog.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The scsi_debug driver has always been restricted to using one ramdisk image
(or none) for its storage. This means that thousands of scsi_debug devices
can be created without exhausting the host machine's RAM. The downside is
that all scsi_debug devices share the same ramdisk image. This option
changes the way a following write to the add_host parameter (or an add_host
in the module/driver invocation) operates. For each new host that is
created while per_host_store is true, a new store (of dev-size_mb MiB) is
created and associated with all the LUs that belong to that new host. The
user (who will need root permissions) needs to take care not to exhaust all
the machine's available RAM.
One reason for doing this is to check that (partial) disk to disk copies
based on scsi_debug devices have actually copied accurately. To test this
the add_host=<n> parameter where <n> is 2 or greater can be used when the
scsi_debug module is loaded. Let us assume that /dev/sdb and /dev/sg1 are
the same scsi_debug device, while /dev/sdc and /dev/sg2 are the same
scsi_debug device. With per_host_store=1 add_host=2 they will have
different ramdisk images. Then the following pseudocode could be executed
to check if the sgh_dd copy worked:
dd if=/dev/urandom of=/dev/sdb
sgh_dd if=/dev/sg1 of=/dev/sg2 [plus option(s) to test]
cmp /dev/sdb /dev/sdc
If the cmp fails then the copy has failed (or some other mechanism wrote to
/dev/sdb or /dev/sdc in the interim).
[mkp: use kstrtobool()]
Link: https://lore.kernel.org/r/20200421151424.32668-3-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a new command line option (e.g. random=1) and sysfs attribute that
causes subsequent command completion times to be between the current
command delay setting and 0. A uniformly distributed 32 bit, kernel
provided integer is used for this purpose.
Since the existing 'delay' whose units are jiffies (typically milliseconds)
and 'ndelay' (units: nanoseconds) options (and sysfs attributes) span a
range greater than 32 bits, some scaling is required.
The purpose of this patch is to widen the range of testing cases that are
visited in long running tests. Put simply: rarely struct race conditions
are more likely to be found when this facility is used.
The default is the previous case in which all command completions were
roughly equal to (if not, slightly longer) than the value given by the
'delay' or 'ndelay' settings (or their defaults). This option's default is
equivalent to setting 'random=0' .
[mkp: use kstrtobool()]
Link: https://lore.kernel.org/r/20200421151424.32668-2-dgilbert@interlog.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct partition is the on-disk format of a MSDOS partition table entry.
Move it out of genhd.h into a new msdos_partition.h header and give it
a msdos_ prefix to avoid confusion.
Also move the magic number from block/partitions/msdos.h to the new
header so that it can be used by the SCSI drivers looking at the DOS
partition tables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Passing the parameter "num_tgts=-1" will start an infinite loop that
exhausts the system memory
Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct scsi_cmnd cmd->req.resid_len which is returned and set respectively
by the helper functions scsi_get_resid() and scsi_set_resid() is an
unsigned int. Reflect this fact in the interface of these helper functions.
Also fix compilation errors due to min() and max() type mismatch introduced
by this change in scsi debug code, usb transport code and in the USB ENE
card reader driver.
Link: https://lore.kernel.org/r/20191030090847.25650-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core. Additionally Christoph
refactored gdth as part of the dma changes. The major mid-layer
change this time is the removal of bidi commands and with them the
whole of the osd/exofs driver and filesystem.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
f69LpXGmMpuagKGvvd4=
=Fhy1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
Teach scsi_debug to honor SWP in the Control Mode Page and report the
resulting WP state in the Device-Specific Parameter field.
In check_device_access_params() verify that commands that will write
the medium are permitted to do so.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
This patch does not change any functionality.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A recent commit removed an element from opcode_info_arr[] but did not
modify opcode_ind_arr[] nor was SDEB_I_XDWRITEREAD removed. Remove
SDEB_I_XDWRITEREAD and bring the two arrays again in sync. This patch
avoids that the following is reported:
BUG: KASAN: null-ptr-deref in scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug]
Read of size 1 at addr 0000000000000001 by task iscsi-test-cu/683
CPU: 3 PID: 683 Comm: iscsi-test-cu Not tainted 5.0.0-rc5-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0x86/0xca
kasan_report.cold.3+0x5/0x3e
__asan_load1+0x47/0x50
scsi_debug_queuecommand+0x60f/0xc90 [scsi_debug]
scsi_queue_rq+0xc17/0x12e0
blk_mq_dispatch_rq_list+0x5fc/0xb10
blk_mq_sched_dispatch_requests+0x2f7/0x300
__blk_mq_run_hw_queue+0xd6/0x180
__blk_mq_delay_run_hw_queue+0x25c/0x290
blk_mq_run_hw_queue+0x119/0x1b0
blk_mq_sched_insert_request+0x274/0x350
blk_execute_rq_nowait+0x78/0x90
blk_execute_rq+0xcc/0x140
sg_io+0x30f/0x700
scsi_cmd_ioctl+0x4d4/0x540
scsi_cmd_blk_ioctl+0x7b/0x8b
sd_ioctl+0xba/0x150
blkdev_ioctl+0x6e1/0xea0
block_ioctl+0x79/0x90
do_vfs_ioctl+0x12b/0x9b0
ksys_ioctl+0x41/0x80
__x64_sys_ioctl+0x43/0x50
do_syscall_64+0x71/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Cc: Christoph Hellwig <hch@lst.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: ae3d56d815 ("scsi: remove bidirectional command support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clang warns several times in the scsi subsystem (trimmed for brevity):
drivers/scsi/hpsa.c:6209:7: warning: overflow converting case value to
switch condition type (2147762695 to 18446744071562347015) [-Wswitch]
case CCISS_GETBUSTYPES:
^
drivers/scsi/hpsa.c:6208:7: warning: overflow converting case value to
switch condition type (2147762694 to 18446744071562347014) [-Wswitch]
case CCISS_GETHEARTBEAT:
^
The root cause is that the _IOC macro can generate really large numbers,
which don't fit into type 'int', which is used for the cmd parameter in
the ioctls in scsi_host_template. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful. However, looking at
the rest of the kernel tree, all ioctls use an 'unsigned int' for the
cmd parameter, which will fit all of the _IOC values in the scsi/ata
subsystems.
Make that change because none of the ioctls expect a negative value for
any command, it brings the ioctls inline with the reset of the kernel,
and it removes ambiguity, which is never good when dealing with compilers.
Link: https://github.com/ClangBuiltLinux/linux/issues/85
Link: https://github.com/ClangBuiltLinux/linux/issues/154
Link: https://github.com/ClangBuiltLinux/linux/issues/157
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Bradley Grove <bgrove@attotech.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
No real need for bidi support once the OSD code is gone.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The WRITE SAME(10) and (16) implementations didn't take account of the
buffer wrap required when the virtual_gb parameter is greater than 0.
Fix that and rename the fake_store() function to lba2fake_store() to lessen
confusion with the global fake_storep pointer. Bump version date.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
The same effects can be achieved by setting the dma_boundary to
PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those
settings into the drivers. Note that in many cases the setting might
be bogus, but this keeps the status quo.
[mkp: fix myrs and myrb]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This allows the host driver to indicate the maximum supported
segment size in a nice an easy way, so that the driver doesn't
have to worry about DMA-layer imposed limitations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This removes the legacy (non-mq) IO path for SCSI.
Cc: linux-scsi@vger.kernel.org
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the
continuing absence of Nic we have target updates for tcmu and target
core (all with reviews and acks). The biggest observable change is
going to be that we're (again) trying to switch to mulitqueue as the
default (a user can still override the setting on the kernel command
line). Other major core stuff is the removal of the remaining
Microchannel drivers, an update of the internal timers and some
reworks of completion and result handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW3R3niYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishauRAP4yfBKK
dbxF81c/Bxi/Stk16FWkOOrjs4CizwmnMcpM5wD/UmM9o6ebDzaYpZgA8wIl7X/N
o/JckEZZpIp+5NySZNc=
=ggLB
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
This patch is motivated by a response in the thread:
Re: [PATCH 0/5]stop normal completion path entering a timeout req
by Jianchao Wang . It generalizes the error injection of
blk_abort_request() to use scsi_debug's "every_nth" mechanism. Ref with
original patch to scsi_debug:
https://lore.kernel.org/lkml/a68ad043-26a1-d3d8-2009-504ba4230e0f@oracle.com/
Also convert two vmalloc/memset(0) to vzalloc() calls.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A test program's runtime became impractically long since any non zero
ndelay (e.g. 1 nanosec) caused Start Stop Unit to delay over 8 magnitudes
greater than other commands. This patch skips long delays (on Start Stop
Unit and Synchronize Cache) if ndelay is less than or equal to 10
microsecs.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 80c49563e2 ("scsi: scsi_debug: implement IMMED bit") there
are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory
leak in schedule_resp(), which can be invoked while unloading the
scsi_debug module: free_all_queued() had already freed all sd_dp and
schedule_resp will alloc a new one, which will never get freed. Here's the
kmemleak report while running xfstests generic/350:
unreferenced object 0xffff88007d752b00 (size 128):
comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s)
hex dump (first 32 bytes):
00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............
00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_...
backtrace:
[<000000002abd83d0>] 0xffffffffa000705e
[<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0
[<000000000c119a00>] scsi_request_fn+0x251/0x550
[<000000009de0c736>] __blk_run_queue+0x3f/0x60
[<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0
[<00000000d17ec79f>] blk_execute_rq+0x3a/0x50
[<00000000a7654b6e>] scsi_execute+0x113/0x250
[<00000000fd78f7cd>] sd_sync_cache+0x95/0x160
[<0000000024dacb14>] sd_shutdown+0x9b/0xd0
[<00000000e9101710>] sd_remove+0x5f/0xb0
[<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0
[<00000000e8ad57b6>] bus_remove_device+0xe9/0x160
[<00000000713a7b8a>] device_del+0x120/0x320
[<00000000e5db670c>] __scsi_remove_device+0x115/0x150
[<00000000eccbef30>] scsi_forget_host+0x20/0x60
[<00000000cd5a0738>] scsi_remove_host+0x6d/0x120
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A patch titled: "[PATCH v2] scsi_debug: implement IMMED bit" introduced
long delays to the Start stop unit (SSU) and Synchronize cache (SC)
commands when the IMMED bit is clear. This patch makes those delays
more realistic. It causes SSU to only delay when the start stop state is
changed; SC only delays when there's been a write since the previous
SC. It also reduced the SC delay from 1 second to 50 milliseconds.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
ufs, mpt3sas, hisi_sas. In addition we have removed several really
old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed
the old scsi_module.c initialization from all remaining drivers. Plus
an assortment of bug fixes, initialization errors and other minor
fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWsVSnSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbvbAP9ErpTZ
OR5iJ5HIz4W3Bd8aTfEpJrDyeYwSUC+sra5SKQD/ZWyVB3fYFSg+ZROyT26pmtmd
SdImhG7hLaHgVvF5qRQ=
=SQ/n
-----END PGP SIGNATURE-----
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
ufs, mpt3sas, hisi_sas.
In addition we have removed several really old drivers: sym53c416,
NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
initialization from all remaining drivers.
Plus an assortment of bug fixes, initialization errors and other minor
fixes"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
scsi: ufs: Add support for Auto-Hibernate Idle Timer
scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
scsi: qla2xxx: fx00 copypaste typo
scsi: qla2xxx: fix error message on <qla2400
scsi: smartpqi: update driver version
scsi: smartpqi: workaround fw bug for oq deletion
scsi: arcmsr: Change driver version to v1.40.00.05-20180309
scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
scsi: qla2xxx: Update driver version to 10.00.00.06-k
scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
scsi: qla2xxx: Remove nvme_done_list
scsi: qla2xxx: Return busy if rport going away
scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
scsi: qla2xxx: Add FC-NVMe abort processing
scsi: qla2xxx: Add changes for devloss timeout in driver
...
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Error injection in scsi_debug (e.g. opts=16, SDEBUG_OPT_TRANSPORT_ERR)
currently doesn't work correctly because the test for sqcp in
resp_read_dt0() and similar resp_*() functions always fails. sqcp is
set from cmnd->host_scribble, which is set in schedule_resp(), which is
called from scsi_debug_queuecommand() after calling the resp_* function.
Defer calling resp_*() until after cmnd->host_scribble is set in
schedule_resp().
Fixes: c483739430 "scsi_debug: add multiple queue support"
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If every_nth > 0, the injection flags must be reset for commands that
aren't supposed to fail (i.e. that aren't "nth"). Otherwise, commands
will continue to fail, like in the every_nth < 0 case.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The Start Stop Unit (SSU) command takes in the order of a second to complete
on some SAS SSDs and longer on hard disks. Synchronize Cache (SC) can also
take some time. Both commands have an IMMED bit in their cdbs for those apps
that don't want to wait. This patch introduces a long delay for those commands
when the IMMED bit is clear. Since SC is a media access command then when the
fake_rw option is active, its cdb processing is skipped and it returns
immediately. The SSU command is not altered by the setting of the fake_rw
option. These actions are not changed by this patch.
Changes since v1:
- clear the cdb mask of SYNCHRONIZE CACHE(16) cdb in byte 1, bit 0
Changes:
- add the SYNCHRONIZE CACHE(16) command
- together with the existing START STOP UNIT and SYNCHRONIZE CACHE(10)
commands process the IMMED bit in their cdbs
- if the IMMED bit is set, return immediately
- if the IMMED bit is clear, treat the delay parameter as having
a unit of one second
- in the SYNCHRONIZE CACHE processing do a bounds check
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pointer styling issues exposed by checkpatch.pl in scsi_debug.c:
ERROR: "foo * bar" should be "foo *bar"
Fixed 37 total errors reported.
[mkp: fixed typo noticed by Doug]
Signed-off-by: John Pittman <jpittman@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds two new parameters to the scsi_debug driver.
During various fault injection scenarios it would be useful to be able
to pick a specific starting sector and number of follow on sectors where
a MEDIUM ERROR for reads would be returned against a scsi-debug device.
Right now this only works against sector 0x1234 and OPT_MEDIUM_ERR_NUM
follow on sectors. However during testing of md-raid and other
scenarios I wanted more flexibility.
The idea is add 2 new parameters:
medium_error_start
medium_error_count
If medium_error_start is set then we don't use the default of
OPT_MEDIUM_ERR_ADDR, but use that set value.
If medium_error_count is set we use that value otherwise default to
OPT_MEDIUM_ERR_NUM.
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 64d513ac31 ("scsi: use host wide tags by default") all
SCSI requests have a tag, whether or not scsi-mq is enabled.
Additionally, it is safe to use blk_mq_unique_tag() and
blk_mq_unique_tag_to_hwq() for legacy SCSI queues. Since this means that
the sdebug_mq_active variable is superfluous, remove it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a state enum into sdebug_defer objects to indicate which, if
any, defer method has been used with the associated command. Also add 2
bools to indicate which of the defer methods has been initialized. Those
objects are re-used but the initialization only needs to be done
once. This simplifies command cancellation handling.
Now the delay associated with a deferred response of a command cannot be
changed (once started) by changing the delay (and ndelay) parameters in
sysfs. Command aborts and driver shutdown are still honoured immediately
when received.
[mkp: applied by hand]
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add resp_write_scat() function to support decoding WRITE SCATTERED
(16 and 32). Also weave resp_write_scat() into the cdb decoding
logic.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewer suggested using the ARRAY_SIZE macro. That reduced one of the subtle
inter-dependencies in the parser's tables.
It is important that commands which simulate media access, indicate this in the
flags for that command. The flag to do that was FF_DIRECT_IO. On reflection
FF_MEDIA_IO seems a more accurate description.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
WRITE SCATTERED needs to take several "bites" out of the data-out buffer.
Expand the do_device_access() function to take a sg_skip argument.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Various cdb masks incorrectly assumed the GROUP NUMBER field
was 5 bits long. It is actually 6 bits long. Correct.
Also fix mask failure (in same byte) to allow DLD0 in READ(16)
and WRITE(16).
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some of my development tools tend to add spaces (my preference) rather
than tabs (kernel convention). Running unexpand to clean these spaces
up found more of them than checkpatch.pl did. Then checkpatch.pl
complained about other style violations in those newly tabbed lines.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although it is important to be able to trigger the code in the SCSI core
for SCSI_MLQUEUE_HOST_BUSY handling, currently it is nontrivial to
trigger that code. Hence this patch that adds a new error injection
option to the scsi_debug driver for making the .queue_rq()
implementation of this driver return SCSI_MLQUEUE_HOST_BUSY.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
