of local_lock_t - this primitive comes from the -rt project and identifies
CPU-local locking dependencies normally handled opaquely beind preempt_disable()
or local_irq_save/disable() critical sections.
The generated code on mainline kernels doesn't change as a result, but still there
are benefits: improved debugging and better documentation of data structure
accesses.
The new local_lock_t primitives are introduced and then utilized in a couple of
kernel subsystems. No change in functionality is intended.
There's also other smaller changes and cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7VAogRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1h67BAAusYb44jJyZUE74rmaLnJr0c6j7eJ6twT
8LKRwxb21Y35DMuX6M5ewmvnHiLFYmjL728z+y8O+SP8vb4PSJBX/75X+wsawIJB
cjHdxonyynVVC4zcbdrc37FsrOiVoKLbbZcpqRzHksKkCq2PHbFVxBNvEaKHZCWW
1jnq0MRy9wEJtW9EThDWPLD+OPWhBvocUFYJH4fiqCIaDiip/E16fz3i+yMPt545
Jz4Ibnsq+G5Ehm1N2AkaZuK9V9nYv85E7Z/UNiK4mkDOApE6OMS+q3d86BhqgPg5
g/HL3HNXAtIY74tBYAac5tAQglT+283LuTpEPt9BEjNM7QxKg/ecXO7lwtn7Boku
dACMqeuMHbLyru8uhbun/VBx1gca7HIhW1cvXO5OoR7o78fHpEFivjJ0B0OuSYAI
y+/DsA41OlkWSEnboUs+zTQgFatqxQPke92xpGOJtjVVZRYHRqxcPtw9WFmoVqWA
HeczDQLcSUhqbKSfr6X9BO2u3qxys5BzmImTKMqXEQ4d8Kk0QXbJgGYGfS8+ASey
Am/jwUP3Cvzs99NxLH5gECKRSuTx3rY7nRGaIBYa+Ui575bdSF8sVAF13riB2mBp
NJq2Pw0D36WcX7ecaC2Fk2ezkphbeuAr8E7gh/Mt/oVxjrfwRGfPMrnIwKygUydw
1W5x+WZ+WsY=
=TBTY
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The biggest change to core locking facilities in this cycle is the
introduction of local_lock_t - this primitive comes from the -rt
project and identifies CPU-local locking dependencies normally handled
opaquely beind preempt_disable() or local_irq_save/disable() critical
sections.
The generated code on mainline kernels doesn't change as a result, but
still there are benefits: improved debugging and better documentation
of data structure accesses.
The new local_lock_t primitives are introduced and then utilized in a
couple of kernel subsystems. No change in functionality is intended.
There's also other smaller changes and cleanups"
* tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
zram: Use local lock to protect per-CPU data
zram: Allocate struct zcomp_strm as per-CPU memory
connector/cn_proc: Protect send_msg() with a local lock
squashfs: Make use of local lock in multi_cpu decompressor
mm/swap: Use local_lock for protection
radix-tree: Use local_lock for protection
locking: Introduce local_lock()
locking/lockdep: Replace zero-length array with flexible-array
locking/rtmutex: Remove unused rt_mutex_cmpxchg_relaxed()
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200507185804.GA15036@embeddedor
These functions are called {early,late} in nmi_{enter,exit} and should
not be traced or probed. They are also puny, so 'inline' them.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505134101.048523500@linutronix.de
The 'invalid wait context' splat doesn't print all the information
required to reconstruct / validate the error, specifically the
irq-context state is missing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
7f26482a87 ("locking/percpu-rwsem: Remove the embedded rwsem")
introduced task_struct memory leaks due to messing up the task_struct
refcount.
At the beginning of percpu_rwsem_wake_function(), it calls get_task_struct(),
but if the trylock failed, it will remain in the waitqueue. However, it
will run percpu_rwsem_wake_function() again with get_task_struct() to
increase the refcount but then only call put_task_struct() once the trylock
succeeded.
Fix it by adjusting percpu_rwsem_wake_function() a bit to guard against
when percpu_rwsem_wait() observing !private, terminating the wait and
doing a quick exit() while percpu_rwsem_wake_function() then doing
wake_up_process(p) as a use-after-free.
Fixes: 7f26482a87 ("locking/percpu-rwsem: Remove the embedded rwsem")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200330213002.2374-1-cai@lca.pw
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
-----BEGIN PGP SIGNATURE-----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=tWXS
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
lockdep: Rename trace_softirqs_{on,off}()
lockdep: Rename trace_hardirq_{enter,exit}()
x86/entry: Rename ___preempt_schedule
x86: Remove unneeded includes
x86/entry: Drop asmlinkage from syscalls
x86/entry/32: Enable pt_regs based syscalls
x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
x86/entry/32: Rename 32-bit specific syscalls
x86/entry/32: Clean up syscall_32.tbl
x86/entry: Remove ABI prefixes from functions in syscall tables
x86/entry/64: Add __SYSCALL_COMMON()
x86/entry: Remove syscall qualifier support
x86/entry/64: Remove ptregs qualifier from syscall table
x86/entry: Move max syscall number calculation to syscallhdr.sh
x86/entry/64: Split X32 syscall table into its own file
x86/entry/64: Move sys_ni_syscall stub to common.c
x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
x86/entry: Refactor SYS_NI macros
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.178626842@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_softirqs_\(on\|off\)" | while read file;
do
sed -ie 's/trace_softirqs_\(on\|off\)/lockdep_softirqs_\1/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.119434738@infradead.org
Set current->irq_config = 1 for hrtimers which are not marked to expire in
hard interrupt context during hrtimer_init(). These timers will expire in
softirq context on PREEMPT_RT.
Setting this allows lockdep to differentiate these timers. If a timer is
marked to expire in hard interrupt context then the timer callback is not
supposed to acquire a regular spinlock instead of a raw_spinlock in the
expiry callback.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.534508206@linutronix.de
Extend lockdep to validate lock wait-type context.
The current wait-types are:
LD_WAIT_FREE, /* wait free, rcu etc.. */
LD_WAIT_SPIN, /* spin loops, raw_spinlock_t etc.. */
LD_WAIT_CONFIG, /* CONFIG_PREEMPT_LOCK, spinlock_t etc.. */
LD_WAIT_SLEEP, /* sleeping locks, mutex_t etc.. */
Where lockdep validates that the current lock (the one being acquired)
fits in the current wait-context (as generated by the held stack).
This ensures that there is no attempt to acquire mutexes while holding
spinlocks, to acquire spinlocks while holding raw_spinlocks and so on. In
other words, its a more fancy might_sleep().
Obviously RCU made the entire ordeal more complex than a simple single
value test because RCU can be acquired in (pretty much) any context and
while it presents a context to nested locks it is not the same as it
got acquired in.
Therefore its necessary to split the wait_type into two values, one
representing the acquire (outer) and one representing the nested context
(inner). For most 'normal' locks these two are the same.
[ To make static initialization easier we have the rule that:
.outer == INV means .outer == .inner; because INV == 0. ]
It further means that its required to find the minimal .inner of the held
stack to compare against the outer of the new lock; because while 'normal'
RCU presents a CONFIG type to nested locks, if it is taken while already
holding a SPIN type it obviously doesn't relax the rules.
Below is an example output generated by the trivial test code:
raw_spin_lock(&foo);
spin_lock(&bar);
spin_unlock(&bar);
raw_spin_unlock(&foo);
[ BUG: Invalid wait context ]
-----------------------------
swapper/0/1 is trying to lock:
ffffc90000013f20 (&bar){....}-{3:3}, at: kernel_init+0xdb/0x187
other info that might help us debug this:
1 lock held by swapper/0/1:
#0: ffffc90000013ee0 (&foo){+.+.}-{2:2}, at: kernel_init+0xd1/0x187
The way to read it is to look at the new -{n,m} part in the lock
description; -{3:3} for the attempted lock, and try and match that up to
the held locks, which in this case is the one: -{2,2}.
This tells that the acquiring lock requires a more relaxed environment than
presented by the lock stack.
Currently only the normal locks and RCU are converted, the rest of the
lockdep users defaults to .inner = INV which is ignored. More conversions
can be done when desired.
The check for spinlock_t nesting is not enabled by default. It's a separate
config option for now as there are known problems which are currently
addressed. The config option allows to identify these problems and to
verify that the solutions found are indeed solving them.
The config switch will be removed and the checks will permanently enabled
once the vast majority of issues has been addressed.
[ bigeasy: Move LD_WAIT_FREE,… out of CONFIG_LOCKDEP to avoid compile
failure with CONFIG_DEBUG_SPINLOCK + !CONFIG_LOCKDEP]
[ tglx: Add the config option ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.427089655@linutronix.de
Extend rcuwait_wait_event() with a state variable so that it is not
restricted to UNINTERRUPTIBLE waits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113241.824030968@linutronix.de
nmi_enter() does lockdep_off() and hence lockdep ignores everything.
And NMI context makes it impossible to do full IN-NMI tracking like we
do IN-HARDIRQ, that could result in graph_lock recursion.
However, since look_up_lock_class() is lockless, we can find the class
of a lock that has prior use and detect IN-NMI after USED, just not
USED after IN-NMI.
NOTE: By shifting the lockdep_off() recursion count to bit-16, we can
easily differentiate between actual recursion and off.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lkml.kernel.org/r/20200221134215.090538203@infradead.org
There were two patterns for lockdep_recursion:
Pattern-A:
if (current->lockdep_recursion)
return
current->lockdep_recursion = 1;
/* do stuff */
current->lockdep_recursion = 0;
Pattern-B:
current->lockdep_recursion++;
/* do stuff */
current->lockdep_recursion--;
But a third pattern has emerged:
Pattern-C:
current->lockdep_recursion = 1;
/* do stuff */
current->lockdep_recursion = 0;
And while this isn't broken per-se, it is highly dangerous because it
doesn't nest properly.
Get rid of all Pattern-C instances and shore up Pattern-A with a
warning.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200313093325.GW12561@hirez.programming.kicks-ass.net
Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:
[ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
...
[ ] Call Trace:
[ ] lock_is_held_type+0x5d/0x150
[ ] ? rcu_lockdep_current_cpu_online+0x64/0x80
[ ] rcu_read_lock_any_held+0xac/0x100
[ ] ? rcu_read_lock_held+0xc0/0xc0
[ ] ? __slab_free+0x421/0x540
[ ] ? kasan_kmalloc+0x9/0x10
[ ] ? __kmalloc_node+0x1d7/0x320
[ ] ? kvmalloc_node+0x6f/0x80
[ ] __bfs+0x28a/0x3c0
[ ] ? class_equal+0x30/0x30
[ ] lockdep_count_forward_deps+0x11a/0x1a0
The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.
Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
If CPU hotplug testing is enabled, a lock might appear to be maximally
unfair just because one of the CPUs was offline almost all the time.
This commit therefore forgives unfairness if CPU hotplug testing was
enabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Both lock_torture_writer() and lock_torture_reader() use the "static"
keyword on their DEFINE_TORTURE_RANDOM(rand) declarations, which means
that a single instance of a random-number generator are shared among all
the writers and another is shared among all the readers. Unfortunately,
this random-number generator was not designed for concurrent access.
This commit therefore removes both "static" keywords so that each reader
and each writer gets its own random-number generator.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.
And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!
Fixes: 0af3fe1efa ("locktorture: Add a lock-torture kernel module")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Peter Zijlstra <peterz@infradead.org>
The rt_mutex structure's ->owner field is read locklessly, so this
commit adds the WRITE_ONCE() to an update in order to provide proper
documentation and READ_ONCE()/WRITE_ONCE() pairing.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Will Deacon <will@kernel.org>
We are missing this annotation in percpu_down_write(). Correct
this.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200108013305.7732-1-dave@stgolabs.net
Now that __percpu_up_read() is only ever used from percpu_up_read()
merge them, it's a small function.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200131151540.212415454@infradead.org
Remove the now unused RWSEM_OWNER_UNKNOWN hack. This hack breaks
PREEMPT_RT and getting rid of it was the entire motivation for
re-writing the percpu rwsem.
The biggest problem is that it is fundamentally incompatible with any
form of Priority Inheritance, any exclusively held lock must have a
distinct owner.
Requested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200204092228.GP14946@hirez.programming.kicks-ass.net
The filesystem freezer uses percpu-rwsem in a way that is effectively
write_non_owner() and achieves this with a few horrible hacks that
rely on the rwsem (!percpu) implementation.
When PREEMPT_RT replaces the rwsem implementation with a PI aware
variant this comes apart.
Remove the embedded rwsem and implement it using a waitqueue and an
atomic_t.
- make readers_block an atomic, and use it, with the waitqueue
for a blocking test-and-set write-side.
- have the read-side wait for the 'lock' state to clear.
Have the waiters use FIFO queueing and mark them (reader/writer) with
a new WQ_FLAG. Use a custom wake_function to wake either a single
writer or all readers until a writer.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200204092403.GB14879@hirez.programming.kicks-ass.net
In preparation for removing the embedded rwsem and building a custom
lock, extract the read-trylock primitive.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200131151540.098485539@infradead.org
As preparation to rework __percpu_down_read() move the
__this_cpu_inc() into it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200131151540.041600199@infradead.org
As preparation for replacing the embedded rwsem, give percpu-rwsem its
own lockdep_map.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200131151539.927625541@infradead.org
Once a lock class is zapped, all the lock chains that include the zapped
class are essentially useless. The lock_chain structure itself can be
reused, but not the corresponding chain_hlocks[] entries. Over time,
we will run out of chain_hlocks entries while there are still plenty
of other lockdep array entries available.
To fix this imbalance, we have to make chain_hlocks entries reusable
just like the others. As the freed chain_hlocks entries are in blocks of
various lengths. A simple bitmap like the one used in the other reusable
lockdep arrays isn't applicable. Instead the chain_hlocks entries are
put into bucketed lists (MAX_CHAIN_BUCKETS) of chain blocks. Bucket 0
is the variable size bucket which houses chain blocks of size larger than
MAX_CHAIN_BUCKETS sorted in decreasing size order. Initially, the whole
array is in one chain block (the primordial chain block) in bucket 0.
The minimum size of a chain block is 2 chain_hlocks entries. That will
be the minimum allocation size. In other word, allocation requests
for one chain_hlocks entry will cause 2-entry block to be returned and
hence 1 entry will be wasted.
Allocation requests for the chain_hlocks are fulfilled first by looking
for chain block of matching size. If not found, the first chain block
from bucket[0] (the largest one) is split. That can cause hlock entries
fragmentation and reduce allocation efficiency if a chain block of size >
MAX_CHAIN_BUCKETS is ever zapped and put back to after the primordial
chain block. So the MAX_CHAIN_BUCKETS must be large enough that this
should seldom happen.
By reusing the chain_hlocks entries, we are able to handle workloads
that add and zap a lot of lock classes without the risk of running out
of chain_hlocks entries as long as the total number of outstanding lock
classes at any time remain within a reasonable limit.
Two new tracking counters, nr_free_chain_hlocks & nr_large_chain_blocks,
are added to track the total number of chain_hlocks entries in the
free bucketed lists and the number of large chain blocks in buckets[0]
respectively. The nr_free_chain_hlocks replaces nr_chain_hlocks.
The nr_large_chain_blocks counter enables to see if we should increase
the number of buckets (MAX_CHAIN_BUCKETS) available so as to avoid to
avoid the fragmentation problem in bucket[0].
An internal nfsd test that ran for more than an hour and kept on
loading and unloading kernel modules could cause the following message
to be displayed.
[ 4318.443670] BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!
The patched kernel was able to complete the test with a lot of free
chain_hlocks entries to spare:
# cat /proc/lockdep_stats
:
dependency chains: 18867 [max: 65536]
dependency chain hlocks: 74926 [max: 327680]
dependency chain hlocks lost: 0
:
zapped classes: 1541
zapped lock chains: 56765
large chain blocks: 1
By changing MAX_CHAIN_BUCKETS to 3 and add a counter for the size of the
largest chain block. The system still worked and We got the following
lockdep_stats data:
dependency chains: 18601 [max: 65536]
dependency chain hlocks used: 73133 [max: 327680]
dependency chain hlocks lost: 0
:
zapped classes: 1541
zapped lock chains: 56702
large chain blocks: 45165
large chain block size: 20165
By running the test again, I was indeed able to cause chain_hlocks
entries to get lost:
dependency chain hlocks used: 74806 [max: 327680]
dependency chain hlocks lost: 575
:
large chain blocks: 48737
large chain block size: 7
Due to the fragmentation, it is possible that the
"MAX_LOCKDEP_CHAIN_HLOCKS too low!" error can happen even if a lot of
of chain_hlocks entries appear to be free.
Fortunately, a MAX_CHAIN_BUCKETS value of 16 should be big enough that
few variable sized chain blocks, other than the initial one, should
ever be present in bucket 0.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-7-longman@redhat.com
Add a new counter nr_zapped_lock_chains to track the number lock chains
that have been removed.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-6-longman@redhat.com
If a lock chain contains a class that is zapped, the whole lock chain is
likely to be invalid. If the zapped class is at the end of the chain,
the partial chain without the zapped class should have been stored
already as the current code will store all its predecessor chains. If
the zapped class is somewhere in the middle, there is no guarantee that
the partial chain will actually happen. It may just clutter up the hash
and make searching slower. I would rather prefer storing the chain only
when it actually happens.
So just dump the corresponding chain_hlocks entries for now. A latter
patch will try to reuse the freed chain_hlocks entries.
This patch also changes the type of nr_chain_hlocks to unsigned integer
to be consistent with the other counters.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-5-longman@redhat.com
The whole point of the lockdep dynamic key patch is to allow unused
locks to be removed from the lockdep data buffers so that existing
buffer space can be reused. However, there is no way to find out how
many unused locks are zapped and so we don't know if the zapping process
is working properly.
Add a new nr_zapped_classes counter to track that and show it in
/proc/lockdep_stats.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-4-longman@redhat.com
Currently, the irq_context field of a lock chains displayed in
/proc/lockdep_chains is just a number. It is likely that many people
may not know what a non-zero number means. To make the information more
useful, print the actual irq names ("softirq" and "hardirq") instead.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-3-longman@redhat.com
There are currently three counters to track the IRQ context of a lock
chain - nr_hardirq_chains, nr_softirq_chains and nr_process_chains.
They are incremented when a new lock chain is added, but they are
not decremented when a lock chain is removed. That causes some of the
statistic counts reported by /proc/lockdep_stats to be incorrect.
IRQ
Fix that by decrementing the right counter when a lock chain is removed.
Since inc_chains() no longer accesses hardirq_context and softirq_context
directly, it is moved out from the CONFIG_TRACE_IRQFLAGS conditional
compilation block.
Fixes: a0b0fd53e1 ("locking/lockdep: Free lock classes that are no longer in use")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-2-longman@redhat.com
Pull locking updates from Ingo Molnar:
"Just a handful of changes in this cycle: an ARM64 performance
optimization, a comment fix and a debug output fix"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/osq: Use optimized spinning loop for arm64
locking/qspinlock: Fix inaccessible URL of MCS lock paper
locking/lockdep: Fix lockdep_stats indentation problem
Arm64 has a more optimized spinning loop (atomic_cond_read_acquire)
using wfe for spinlock that can boost performance of sibling threads
by putting the current cpu to a wait state that is broken only when
the monitored variable changes or an external event happens.
OSQ has a more complicated spinning loop. Besides the lock value, it
also checks for need_resched() and vcpu_is_preempted(). The check for
need_resched() is not a problem as it is only set by the tick interrupt
handler. That will be detected by the spinning cpu right after iret.
The vcpu_is_preempted() check, however, is a problem as changes to the
preempt state of of previous node will not affect the wait state. For
ARM64, vcpu_is_preempted is not currently defined and so is a no-op.
Will has indicated that he is planning to para-virtualize wfe instead
of defining vcpu_is_preempted for PV support. So just add a comment in
arch/arm64/include/asm/spinlock.h to indicate that vcpu_is_preempted()
should not be defined as suggested.
On a 2-socket 56-core 224-thread ARM64 system, a kernel mutex locking
microbenchmark was run for 10s with and without the patch. The
performance numbers before patch were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 316/123,143/2,121,269
Threads = 224, Total Rate = 2,757 kop/s; Percpu Rate = 12 kop/s
After patch, the numbers were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 334/147,836/1,304,787
Threads = 224, Total Rate = 3,311 kop/s; Percpu Rate = 15 kop/s
So there was about 20% performance improvement.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200113150735.21956-1-longman@redhat.com
It was found that two lines in the output of /proc/lockdep_stats have
indentation problem:
# cat /proc/lockdep_stats
:
in-process chains: 25057
stack-trace entries: 137827 [max: 524288]
number of stack traces: 7973
number of stack hash chains: 6355
combined max dependencies: 1356414598
hardirq-safe locks: 57
hardirq-unsafe locks: 1286
:
All the numbers displayed in /proc/lockdep_stats except the two stack
trace numbers are formatted with a field with of 11. To properly align
all the numbers, a field width of 11 is now added to the two stack
trace numbers.
Fixes: 8c779229d0 ("locking/lockdep: Report more stack trace statistics")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.kernel.org/r/20191211213139.29934-1-longman@redhat.com
The commit 91d2a812df ("locking/rwsem: Make handoff writer
optimistically spin on owner") will allow a recently woken up waiting
writer to spin on the owner. Unfortunately, if the owner happens to be
RWSEM_OWNER_UNKNOWN, the code will incorrectly spin on it leading to a
kernel crash. This is fixed by passing the proper non-spinnable bits
to rwsem_spin_on_owner() so that RWSEM_OWNER_UNKNOWN will be treated
as a non-spinnable target.
Fixes: 91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200115154336.8679-1-longman@redhat.com
If the lockdep code is really running out of the stack_trace entries,
it is likely that buffer overrun can happen and the data immediately
after stack_trace[] will be corrupted.
If there is less than LOCK_TRACE_SIZE_IN_LONGS entries left before
the call to save_trace(), the max_entries computation will leave it
with a very large positive number because of its unsigned nature. The
subsequent call to stack_trace_save() will then corrupt the data after
stack_trace[]. Fix that by changing max_entries to a signed integer
and check for negative value before calling stack_trace_save().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 12593b7467 ("locking/lockdep: Reduce space occupied by stack traces")
Link: https://lkml.kernel.org/r/20191220135128.14876-1-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This ended up causing some noise in places such as rxrpc running in softirq.
The warning is misleading in this case as the mutex trylock and unlock
operations are done within the same context; and therefore we need not
worry about the PI-boosting issues that comes along with no single-owner
lock guarantees.
While we don't want to support this in mutexes, there is no way out of
this yet; so lets get rid of the WARNs for now, as it is only fair to
code that has historically relied on non-preemptible softirq guarantees.
In addition, changing the lock type is also unviable: exclusive rwsems
have the same issue (just not the WARN_ON) and counting semaphores
would introduce a performance hit as mutexes are a lot more optimized.
This reverts:
a0855d24fc: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
Fixes: a0855d24fc: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-afs@lists.infradead.org
Cc: linux-fsdevel@vger.kernel.org
Cc: will@kernel.org
Link: https://lkml.kernel.org/r/20191210220523.28540-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.
Example data race report:
read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
__raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
_raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
get_partial_node mm/slub.c:1870 [inline]
<snip>
write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
_raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
free_debug_processing+0x1b3/0x210 mm/slub.c:1214
__slab_free+0x292/0x400 mm/slub.c:2864
<snip>
As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.
This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
This changes "to the list" to "from the list" and also deletes the
obsolete comment about the "@nested" argument.
The "nested" argument was removed in this commit, earlier this year:
5facae4f35 ("locking/lockdep: Remove unused @nested argument from lock_release()").
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20191104091252.GA31509@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add warning checks if mutex_trylock() or mutex_unlock() are used in
IRQ contexts, under CONFIG_DEBUG_MUTEXES=y.
While the mutex rules and semantics are explicitly documented, this allows
to expose any abusers and robustifies the whole thing.
While trylock and unlock are non-blocking, calling from IRQ context
is still forbidden (lock must be within the same context as unlock).
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: https://lkml.kernel.org/r/20191025033634.3330-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Including rwlock.h directly will cause kernel builds to fail
if CONFIG_PREEMPT_RT is defined. The correct header file
(rwlock_rt.h OR rwlock.h) will be included by spinlock.h which
is included by locktorture.c anyway.
Remove the include of linux/rwlock.h.
Signed-off-by: Wolfgang M. Reimer <linuxball@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>