This is simple to do, the "host" BNDCFGS is either 0 or the guest value.
However, both controls have to be present. We cannot provide MPX if
we only have one of the "load BNDCFGS" or "clear BNDCFGS" controls.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVE support for KVM is already using host_xcr0 & KVM_SUPPORTED_XCR0 as
a "dynamic" version of KVM_SUPPORTED_XCR0.
However, this is not enough because the MPX bits should not be presented
to the guest unless kvm_x86_ops confirms the support. So, replace all
instances of host_xcr0 & KVM_SUPPORTED_XCR0 with a new function
kvm_supported_xcr0() that also has this check.
Note that here:
if (xstate_bv & ~KVM_SUPPORTED_XCR0)
return -EINVAL;
if (xstate_bv & ~host_cr0)
return -EINVAL;
the code is equivalent to
if ((xstate_bv & ~KVM_SUPPORTED_XCR0) ||
(xstate_bv & ~host_cr0)
return -EINVAL;
i.e. "xstate_bv & (~KVM_SUPPORTED_XCR0 | ~host_cr0)" which is in turn
equal to "xstate_bv & ~(KVM_SUPPORTED_XCR0 & host_cr0)". So we should
also use the new function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add emulation for 0x66 prefixed instruction of 0f 28 opcode
that has been added earlier.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with KVM.
This patch modifies KVM to completely ignore ioapic polarity as set by
the guest OS, enabling misbehaving guests to work alongside those which
comply with the ActiveHigh polarity specified by QEMU's ACPI tables.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
[Move documentation to KVM_IRQ_LINE, add ia64. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode (i.e. the guest controls the debug
registers, having to take an exit for each DR access is a waste of time.
If the guest gets into a state where each context switch causes DR to be
saved and restored, this can take away as much as 40% of the execution
time from the guest.
If the guest is running with vcpu->arch.db == vcpu->arch.eff_db, we
can let it write freely to the debug registers and reload them on the
next exit. We still need to exit on the first access, so that the
KVM_DEBUGREG_WONT_EXIT flag is set in switch_db_regs; after that, further
accesses to the debug registers will not cause a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike other intercepts, debug register intercepts will be modified
in hot paths if the guest OS is bad or otherwise gets tricked into
doing so.
Avoid calling recalc_intercepts 16 times for debug registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When preparing the VMCS02, the CPU-based execution controls is computed
by vmx_exec_control. Turn off DR access exits there, too, if the
KVM_DEBUGREG_WONT_EXIT bit is set in switch_db_regs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode (i.e. the guest controls the debug
registers, having to take an exit for each DR access is a waste of time.
If the guest gets into a state where each context switch causes DR to be
saved and restored, this can take away as much as 40% of the execution
time from the guest.
If the guest is running with vcpu->arch.db == vcpu->arch.eff_db, we
can let it write freely to the debug registers and reload them on the
next exit. We still need to exit on the first access, so that the
KVM_DEBUGREG_WONT_EXIT flag is set in switch_db_regs; after that, further
accesses to the debug registers will not cause a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode, the guest controls the debug
registers and having to take an exit for each DR access is a waste
of time. If the guest gets into a state where each context switch
causes DR to be saved and restored, this can take away as much as 40%
of the execution time from the guest.
After this patch, VMX- and SVM-specific code can set a flag in
switch_db_regs, telling vcpu_enter_guest that on the next exit the debug
registers might be dirty and need to be reloaded (syncing will be taken
care of by a new callback in kvm_x86_ops). This flag can be set on the
first access to a debug registers, so that multiple accesses to the
debug registers only cause one vmexit.
Note that since the guest will be able to read debug registers and
enable breakpoints in DR7, we need to ensure that they are synchronized
on entry to the guest---including DR6 that was not synced before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, this works even if the bit is not in "min", because the bit is always
set in MSR_IA32_VMX_ENTRY_CTLS. Mention it for the sake of documentation, and
to avoid surprises if we later switch to MSR_IA32_VMX_TRUE_ENTRY_CTLS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's no longer possible to enter enable_irq_window in guest mode when
L1 intercepts external interrupts and we are entering L2. This is now
caught in vcpu_enter_guest. So we can remove the check from the VMX
version of enable_irq_window, thus the need to return an error code from
both enable_irq_window and enable_nmi_window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 27.2.3, IDT vectoring information will not be valid on
vmexits caused by external NMIs. So we have to avoid creating such
scenarios by delaying EXIT_REASON_EXCEPTION_NMI injection as long as we
have a pending interrupt because that one would be migrated to L1's IDT
vectoring info on nested exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We cannot rely on the hardware-provided preemption timer support because
we are holding L2 in HLT outside non-root mode. Furthermore, emulating
the preemption will resolve tick rate errata on older Intel CPUs.
The emulation is based on hrtimer which is started on L2 entry, stopped
on L2 exit and evaluated via the new check_nested_events hook. As we no
longer rely on hardware features, we can enable both the preemption
timer support and value saving unconditionally.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the check for leaving L2 on pending and intercepted IRQs or NMIs
from the *_allowed handler into a dedicated callback. Invoke this
callback at the relevant points before KVM checks if IRQs/NMIs can be
injected. The callback has the task to switch from L2 to L1 if needed
and inject the proper vmexit events.
The rework fixes L2 wakeups from HLT and provides the foundation for
preemption timer emulation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 0061d53daf introduced a mechanism to execute a global clock
update for a vm. We can apply this periodically in order to propagate
host NTP corrections. Also, if all vcpus of a vm are pinned, then
without an additional trigger, no guest NTP corrections can propagate
either, as the current trigger is only vcpu cpu migration.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we update a vcpu's local clock it may pick up an NTP correction.
We can't wait an indeterminate amount of time for other vcpus to pick
up that correction, so commit 0061d53daf introduced a global clock
update. However, we can't request a global clock update on every vcpu
load either (which is what happens if the tsc is marked as unstable).
The solution is to rate-limit the global clock updates. Marcelo
calculated that we should delay the global clock updates no more
than 0.1s as follows:
Assume an NTP correction c is applied to one vcpu, but not the other,
then in n seconds the delta of the vcpu system_timestamps will be
c * n. If we assume a correction of 500ppm (worst-case), then the two
vcpus will diverge 50us in 0.1s, which is a considerable amount.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e504c9098e (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Fixes: e504c9098e
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e504c9098e (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Fixes: e504c9098e
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address. When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one. On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.
As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio. In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented. The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer. If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.
However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.
Fixes: f78146b0f9
Signed-off-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to scan the entire VCPU array.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Read-only large sptes can be created due to read-only faults as
follows:
- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).
Fix by dropping large spte when necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
emulator_cmpxchg_emulated writes to guest memory, therefore it should
update the dirty bitmap accordingly.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 5d5a80cd172ea6fb51786369bcc23356b1e9e956 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Mon, 24 Feb 2014 18:11:55 +0800
Subject: [PATCH v5 2/3] KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save
Add MSR_IA32_BNDCFGS to msrs_to_save, and corresponding logic
to kvm_get/set_msr().
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 00c920c96127d20d4c3bb790082700ae375c39a0 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Fri, 21 Feb 2014 23:47:18 +0800
Subject: [PATCH] KVM: x86: Fix xsave cpuid exposing bug
EBX of cpuid(0xD, 0) is dynamic per XCR0 features enable/disable.
Bit 63 of XCR0 is reserved for future expansion.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 0750e335eb5860b0b483e217e8a08bd743cbba16 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Thu, 20 Feb 2014 17:39:32 +0800
Subject: [PATCH] KVM: x86: expose ADX feature to guest
ADCX and ADOX instructions perform an unsigned addition with Carry flag and
Overflow flag respectively.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 24ffdce9efebf13c6ed4882f714b2b57ef1141eb Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Thu, 20 Feb 2014 17:38:26 +0800
Subject: [PATCH] KVM: x86: expose new instruction RDSEED to guest
RDSEED instruction return a random number, which supplied by a
cryptographically secure, deterministic random bit generator(DRBG).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These days hv_clock allocation is memblock based (i.e. the percpu
allocator is not involved), which means that the physical address
of each of the per-cpu hv_clock areas is guaranteed to remain
unchanged through all its lifetime and we do not need to update
its location after CPU bring-up.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should open NMI window right after an iret, but SVM exits before it.
We wanted to single step using the trap flag and then open it.
(or we could emulate the iret instead)
We don't do it since commit 3842d135ff (likely), because the iret exit
handler does not request an event, so NMI window remains closed until
the next exit.
Fix this by making KVM_REQ_EVENT request in the iret handler.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When this was introduced, kvm_flush_remote_tlbs() could be called
without holding mmu_lock. It is now acknowledged that the function
must be called before releasing mmu_lock, and all callers have already
been changed to do so.
There is no need to use smp_mb() and cmpxchg() any more.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The first is a fix for the way the ring buffer stores timestamps.
After a restructure of the code was done, the ring buffer timestamp
logic missed the fact that the first event on a sub buffer is to have
a zero delta, as the full timestamp is stored on the sub buffer itself.
But because the delta was not cleared to zero, the timestamp for that
event will be calculated as the real timestamp + the delta from the
last timestamp. This can skew the timestamps of the events and
have them say they happened when they didn't really happen. That's bad.
The second fix is for modifying the function graph caller site.
When the stop machine was removed from updating the function tracing
code, it missed updating the function graph call site location.
It is still modified as if it is being done via stop machine. But it's not.
This can lead to a GPF and kernel crash if the function graph call site
happens to lie between cache lines and one CPU is executing it while
another CPU is doing the update. It would be a very hard condition to
hit, but the result is sever enough to have it fixed ASAP.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJS/2leAAoJEKQekfcNnQGu7nYH/AltUO19AgM2sFLOLM7Q0dp4
Lg7vE8CLKtFq0fjtv/ri//fJ56Lr+/WNHiiD06aIrgnMVBbWynS0m0RO+9bhFl8/
rELiUpXTTruqljmlT2T5lPxk+ZKgtLbxK8hNywU99eLgkTwyaOwrSUol30E8pw41
UwtKg4OAn1LbjQ8/sddVynGlFDNRdqFiGTIDvhHqI6F6/QlaEX81EeZbLThDU4D/
l86fMuIdw5pb+efa29Rr0s7O4Xol7SJgnSMVgd0OYADRFmp4sg+MKxuJAUjPsHk7
9vvbylOb4w5H6lo5h7kUee3w7kG+FjYVoEx+Sqq9936+KlwtN0kbiNvl0DkrXnY=
=kUmM
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull twi tracing fixes from Steven Rostedt:
"Two urgent fixes in the tracing utility.
The first is a fix for the way the ring buffer stores timestamps.
After a restructure of the code was done, the ring buffer timestamp
logic missed the fact that the first event on a sub buffer is to have
a zero delta, as the full timestamp is stored on the sub buffer
itself. But because the delta was not cleared to zero, the timestamp
for that event will be calculated as the real timestamp + the delta
from the last timestamp. This can skew the timestamps of the events
and have them say they happened when they didn't really happen.
That's bad.
The second fix is for modifying the function graph caller site. When
the stop machine was removed from updating the function tracing code,
it missed updating the function graph call site location. It is still
modified as if it is being done via stop machine. But it's not. This
can lead to a GPF and kernel crash if the function graph call site
happens to lie between cache lines and one CPU is executing it while
another CPU is doing the update. It would be a very hard condition to
hit, but the result is severe enough to have it fixed ASAP"
* tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Use breakpoints for converting function graph caller
ring-buffer: Fix first commit on sub-buffer having non-zero delta
Pull x86 EFI fixes from Peter Anvin:
"A few more EFI-related fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Check status field to validate BGRT header
x86/efi: Fix 32-bit fallout
There have been reports of EFI crashes since -rc1. The following two
commits fix known issues.
* Fix boot failure on 32-bit EFI due to the recent EFI memmap changes
merged during the merge window - Borislav Petkov
* Avoid a crash during efi_bgrt_init() by detecting invalid BGRT
headers based on the 'status' field.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull x86 fixes from Peter Anvin:
"A collection of small fixes:
- There still seem to be problems with asm goto which requires the
empty asm hack.
- If SMAP is disabled at compile time, don't enable it nor try to
interpret a page fault as an SMAP violation.
- Fix a case of unbounded recursion while tracing"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, smap: smap_violation() is bogus if CONFIG_X86_SMAP is off
x86, smap: Don't enable SMAP if CONFIG_X86_SMAP is disabled
compiler/gcc4: Make quirk for asm_volatile_goto() unconditional
x86: Use preempt_disable_notrace() in cycles_2_ns()
Madper reported seeing the following crash,
BUG: unable to handle kernel paging request at ffffffffff340003
IP: [<ffffffff81d85ba4>] efi_bgrt_init+0x9d/0x133
Call Trace:
[<ffffffff81d8525d>] efi_late_init+0x9/0xb
[<ffffffff81d68f59>] start_kernel+0x436/0x450
[<ffffffff81d6892c>] ? repair_env_string+0x5c/0x5c
[<ffffffff81d68120>] ? early_idt_handlers+0x120/0x120
[<ffffffff81d685de>] x86_64_start_reservations+0x2a/0x2c
[<ffffffff81d6871e>] x86_64_start_kernel+0x13e/0x14d
This is caused because the layout of the ACPI BGRT header on this system
doesn't match the definition from the ACPI spec, and so we get a bogus
physical address when dereferencing ->image_address in efi_bgrt_init().
Luckily the status field in the BGRT header clearly marks it as invalid,
so we can check that field and skip BGRT initialisation.
Reported-by: Madper Xie <cxie@redhat.com>
Suggested-by: Toshi Kani <toshi.kani@hp.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
We do not enable the new efi memmap on 32-bit and thus we need to run
runtime_code_page_mkexec() unconditionally there. Fix that.
Reported-and-tested-by: Lejun Zhu <lejun.zhu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
If CONFIG_X86_SMAP is disabled, smap_violation() tests for conditions
which are incorrect (as the AC flag doesn't matter), causing spurious
faults.
The dynamic disabling of SMAP (nosmap on the command line) is fine
because it disables X86_FEATURE_SMAP, therefore causing the
static_cpu_has() to return false.
Found by Fengguang Wu's test system.
[ v3: move all predicates into smap_violation() ]
[ v2: use IS_ENABLED() instead of #ifdef ]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhost
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.7+
If SMAP support is not compiled into the kernel, don't enable SMAP in
CR4 -- in fact, we should clear it, because the kernel doesn't contain
the proper STAC/CLAC instructions for SMAP support.
Found by Fengguang Wu's test system.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/20140213124550.GA30497@localhost
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.7+
When the conversion was made to remove stop machine and use the breakpoint
logic instead, the modification of the function graph caller is still
done directly as though it was being done under stop machine.
As it is not converted via stop machine anymore, there is a possibility
that the code could be layed across cache lines and if another CPU is
accessing that function graph call when it is being updated, it could
cause a General Protection Fault.
Convert the update of the function graph caller to use the breakpoint
method as well.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # 3.5+
Fixes: 08d636b6d4 "ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Noonan forwarded a users report where they had a problem starting
vsftpd on a Xen paravirtualized guest, with this in dmesg:
BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067
page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0
page flags: 0x2ffc0000000014(referenced|dirty)
addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74
CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1
Call Trace:
dump_stack+0x45/0x56
print_bad_pte+0x22e/0x250
unmap_single_vma+0x583/0x890
unmap_vmas+0x65/0x90
exit_mmap+0xc5/0x170
mmput+0x65/0x100
do_exit+0x393/0x9e0
do_group_exit+0xcc/0x140
SyS_exit_group+0x14/0x20
system_call_fastpath+0x1a/0x1f
Disabling lock debugging due to kernel taint
BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1
BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1
The issue could not be reproduced under an HVM instance with the same
kernel, so it appears to be exclusive to paravirtual Xen guests. He
bisected the problem to commit 1667918b64 ("mm: numa: clear numa
hinting information on mprotect") that was also included in 3.12-stable.
The problem was related to how xen translates ptes because it was not
accounting for the _PAGE_NUMA bit. This patch splits pte_present to add
a pteval_present helper for use by xen so both bare metal and xen use
the same code when checking if a PTE is present.
[mgorman@suse.de: wrote changelog, proposed minor modifications]
[akpm@linux-foundation.org: fix typo in comment]
Reported-by: Steven Noonan <steven@uplinklabs.net>
Tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Elena Ufimtseva <ufimtseva@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When debug preempt is enabled, preempt_disable() can be traced by
function and function graph tracing.
There's a place in the function graph tracer that calls trace_clock()
which eventually calls cycles_2_ns() outside of the recursion
protection. When cycles_2_ns() calls preempt_disable() it gets traced
and the graph tracer will go into a recursive loop causing a crash or
worse, a triple fault.
Simple fix is to use preempt_disable_notrace() in cycles_2_ns, which
makes sense because the preempt_disable() tracing may use that code
too, and it tracing it, even with recursion protection is rather
pointless.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140204141315.2a968a72@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Peter Anvin:
"Quite a varied little collection of fixes. Most of them are
relatively small or isolated; the biggest one is Mel Gorman's fixes
for TLB range flushing.
A couple of AMD-related fixes (including not crashing when given an
invalid microcode image) and fix a crash when compiled with gcov"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Unify valid container checks
x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
x86/efi: Allow mapping BGRT on x86-32
x86: Fix the initialization of physnode_map
x86, cpu hotplug: Fix stack frame warning in check_irq_vectors_for_cpu_disable()
x86/intel/mid: Fix X86_INTEL_MID dependencies
arch/x86/mm/srat: Skip NUMA_NO_NODE while parsing SLIT
mm, x86: Revisit tlb_flushall_shift tuning for page flushes except on IvyBridge
x86: mm: change tlb_flushall_shift for IvyBridge
x86/mm: Eliminate redundant page table walk during TLB range flushing
x86/mm: Clean up inconsistencies when flushing TLB ranges
mm, x86: Account for TLB flushes only when debugging
x86/AMD/NB: Fix amd_set_subcaches() parameter type
x86/quirks: Add workaround for AMD F16h Erratum792
x86, doc, kconfig: Fix dud URL for Microcode data
The following path will cause array out of bound.
memblock_add_region() will always set nid in memblock.reserved to
MAX_NUMNODES. In numa_register_memblks(), after we set all nid to
correct valus in memblock.reserved, we called setup_node_data(), and
used memblock_alloc_nid() to allocate memory, with nid set to
MAX_NUMNODES.
The nodemask_t type can be seen as a bit array. And the index is 0 ~
MAX_NUMNODES-1.
After that, when we call node_set() in numa_clear_kernel_node_hotplug(),
the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~
MAX_NUMNODES-1].
See below:
numa_init()
|---> numa_register_memblks()
| |---> memblock_set_node(memory) set correct nid in memblock.memory
| |---> memblock_set_node(reserved) set correct nid in memblock.reserved
| |......
| |---> setup_node_data()
| |---> memblock_alloc_nid() here, nid is set to MAX_NUMNODES (1024)
|......
|---> numa_clear_kernel_node_hotplug()
|---> node_set() here, we have an index 1024, and overflowed
This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix
this problem.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Dave Jones <davej@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Dave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug()
was not initialized. So we need to initialize it.
[akpm@linux-foundation.org: use NODE_MASK_NONE, per David]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: David Rientjes <rientjes@google.com>
Tested-by: Dave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For additional coverage, BorisO and friends unknowlingly did swap AMD
microcode with Intel microcode blobs in order to see what happens. What
did happen on 32-bit was
[ 5.722656] BUG: unable to handle kernel paging request at be3a6008
[ 5.722693] IP: [<c106d6b4>] load_microcode_amd+0x24/0x3f0
[ 5.722716] *pdpt = 0000000000000000 *pde = 0000000000000000
because there was a valid initrd there but without valid microcode in it
and the container check happened *after* the relocated ramdisk handling
on 32-bit, which was clearly wrong.
While at it, take care of the ramdisk relocation on both 32- and 64-bit
as it is done on both. Also, comment what we're doing because this code
is a bit tricky.
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391460104-7261-1-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
